C. Machine-de-chocs-et-essais and . Ii, MÉTHODES EXPÉRIMENTALES d'assurer la présence de liquide pendant la durée de l'essai (Figure 2.2). L'ensemble tête-cupule est incliné à 45° pour respecter les conditions anatomiques standards. La cupule est impactée dans un métal-back qui est ensuite

C. Alumine-alumine, . J. Iii, J. Uribe, J. Hausselle, and . Geringer, DURABILITÉ DES CÉRAMIQUES a) b) Publications Publications Articles publiés Finite element modelling of shock -induced damages on ceramic hip prostheses. International Scholarly Research Network, ISRN Materials Science, vol.2011, issue.14, pp.10-5402, 2011.

J. Uribe, J. Geringer, and B. Forest, Shock machine for the mechanical behaviour of hip prostheses: a description of performance capabilities. Lubrication Science, Article ID, vol.167, issue.16, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00682226

J. Article-soumis, J. Uribe, L. Geringer, J. Gremillard, B. Chevalier et al., Degradation of alumina and zirconia-toughened alumina (ZTA) hip prostheses tested under microseparation conditions in a shock device

L. Chapitre-de-livre, S. Gremillard, J. Meille, J. Chevalier, V. Zhao et al., Degradation of Bioceramics, 2011.

J. Uribe, J. Geringer, B. Forest, L. Gremillard, and J. Chevalier, Durées de vie de prothèses de hanche en biocéramiques soumises à des dégradations par chocs Journées annuelles du Groupe Français de la Céramique

J. Uribe, J. Geringer, and B. Forest, Degradation of alumina and zirconia toughened alumina (ZTA) hip prostheses tested under microseparation conditions in a shock device, Tribology International, vol.63, pp.18-21, 2011.
DOI : 10.1016/j.triboint.2012.10.002
URL : https://hal.archives-ouvertes.fr/hal-00909520

J. Uribe, J. Geringer, and B. Forest, Dégradation des prothèses de hanche en céramique soumises aux chocs, Journée des Implants, 2010.

J. Uribe, J. Geringer, and B. Forest, Understanding the degradation mechanism of alumina hip prostheses subjected to shocks, Wear of Materials 2011 -18th International Conference, 2011.

J. Uribe, J. Geringer, and B. Forest, Understanding the degradation mechanism of alumina hip prostheses subjected to shocks, II Rencontres Régionales Recherche ? Industrie -Clinique Matériaux et Implants, Tissus et Substituts osseux : Techniques et Evolutions -25, 2011.

J. Uribe, J. Geringer, and B. Forest, Wear and shock resistance of alumina and zirconia toughened alumina in total hip arthroplasty, 4th International Conference on the Mechanics of Biomaterials and Tissues, décembre 2011. Hawaii

S. Affatato, M. Spinelli, M. Zavalloni, C. Mazzega-fabbro, and M. Viceconti, Tribology and total hip joint replacement: Current concepts in mechanical simulation, Medical Engineering & Physics, vol.30, issue.10, 2008.
DOI : 10.1016/j.medengphy.2008.07.006

A. D. Aza, J. Chevalier, G. Fantozzi, M. Schehl, and R. , Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses, Biomaterials, vol.23, issue.3, pp.937-945, 2002.
DOI : 10.1016/S0142-9612(01)00206-X

M. Baleani, L. Cristofolini, and M. Viceconti, Endurance testing of hip prostheses: a comparison between the load fixed in ISO 7206 standard and the physiological loads, Clinical Biomechanics, vol.14, issue.5, pp.339-345, 1999.
DOI : 10.1016/S0268-0033(98)00085-0

J. Barbillat, D. Bougeard, G. Buntinx, M. Delhaye, P. Dhamelincourt et al., Spectrométrie Raman. traité analyse et caractérisation, 2009.

P. L. Beguec and M. Goldschild, Reprise d'une prothèse fémorale descellée. Le concept press-fit : Principes et application pratique, Maîtrise Orthopédique, 2003.

R. Benzaid and J. Chevalier, Fracture toughness, strength and slow crack growth in a ceria stabilized zirconia???alumina nanocomposite for medical applications, Biomaterials, vol.29, issue.27, pp.3636-3641, 2008.
DOI : 10.1016/j.biomaterials.2008.05.021
URL : https://hal.archives-ouvertes.fr/hal-00434033

G. Bergmann, G. Deuretzbacher, M. Heller, F. Graichen, A. Rohlmann et al., Hip contact forces and gait patterns from routine activities, Journal of Biomechanics, vol.34, issue.7, pp.859-871, 2001.
DOI : 10.1016/S0021-9290(01)00040-9

G. Bergmann, F. Graichen, and A. , Rohlman : Friction-induced temperature increase of hip implants, chap. Reliability and long term results of ceramics in orthopaedics, Sedel L, Thieme-Willmann G, 1999.

G. Bergmann, F. Graichen, and A. , Hip joint loading during walking and running, measured in two patients, Journal of Biomechanics, vol.26, issue.8, pp.969-990, 1993.
DOI : 10.1016/0021-9290(93)90058-M

M. Blewis, G. Nugent-derfus, T. Schmidt, B. Schumacher, and R. , A model of synovial fluid lubricant composition in normal and injured joints, European Cells and Materials, vol.13, pp.26-39, 2007.
DOI : 10.22203/eCM.v013a03

L. Blunt, P. Bills, X. Jiang, C. Hardaker, and G. Chakrabarty, The role of tribology and metrology in the latest development of bio-materials, Wear, vol.266, issue.3-4, pp.424-431, 2009.
DOI : 10.1016/j.wear.2008.04.015

P. Boutin, Arthroplastie totale de hanche par prothèse en alumine frittée, Revue de Chirurgie Orthopédique, vol.58, pp.229-246, 1972.

B. Cales, Têtes prothétiques en zircone comportement à long terme, Annales orthopédiques de l'Ouest, pp.32-36, 1997.

W. Capello, J. D. Antonio, J. Feinberg, M. Manley, and M. , Ceramic-on-Ceramic Total Hip Arthroplasty: Update, The Journal of Arthroplasty, vol.23, issue.7, pp.39-43, 2008.
DOI : 10.1016/j.arth.2008.06.003

J. Caton, J. Bouraly, P. Reynaud, and Z. Merabet, Phase Transformation in Zirconia Heads after THA Myth or Reality?, Journal of Bone and Joint Surgery, vol.87120, 2005.
DOI : 10.1007/978-3-7985-1968-8_13

J. Chevalier, What future for zirconia as a biomaterial?, Biomaterials, vol.27, issue.4, pp.535-543, 2006.
DOI : 10.1016/j.biomaterials.2005.07.034
URL : https://hal.archives-ouvertes.fr/hal-00436140

J. Chevalier, B. Cales, and J. , Low-Temperature Aging of Y-TZP Ceramics, Journal of the American Ceramic Society, vol.65, issue.4, pp.2150-2154, 1999.
DOI : 10.1111/j.1151-2916.1999.tb02055.x

J. Chevalier, S. Deville, G. Fantozzi, J. Bartolomé, C. Pecharroman et al., Nanostructured Ceramic Oxides with a Slow Crack Growth Resistance Close to Covalent Materials, Nano Letters, vol.5, issue.7, pp.1297-1301, 2005.
DOI : 10.1021/nl050492j
URL : https://hal.archives-ouvertes.fr/hal-00436807

J. Chevalier, S. Deville, E. Münch, R. Jullian, and F. , Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis, Biomaterials, vol.25, issue.24, pp.5539-5545, 2004.
DOI : 10.1016/j.biomaterials.2004.01.002

J. Chevalier, S. Grandjean, M. Kuntz, and G. , On the kinetics and impact of tetragonal to monoclinic transformation in an alumina/zirconia composite for arthroplasty applications, Biomaterials, vol.30, issue.29, pp.5279-5282, 2009.
DOI : 10.1016/j.biomaterials.2009.06.022

J. Chevalier and L. Gremillard, Ceramics for medical applications: A picture for the next 20 years, Journal of the European Ceramic Society, vol.29, issue.7, pp.1245-1255, 2009.
DOI : 10.1016/j.jeurceramsoc.2008.08.025
URL : https://hal.archives-ouvertes.fr/hal-00431366

J. Chevalier, L. Gremillard, and S. S. , Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants, Annual Review of Materials Research, vol.37, issue.1, pp.1-32, 2007.
DOI : 10.1146/annurev.matsci.37.052506.084250
URL : https://hal.archives-ouvertes.fr/hal-00434119

J. Chevalier, P. Taddei, L. Gremillard, S. Deville, G. Fantozzi et al., Reliability assessment in advanced nanocomposite materials for orthopaedic applications, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.3, pp.303-314, 2011.
DOI : 10.1016/j.jmbbm.2010.10.010

C. Chevillotte, R. Trousdale, Q. Chen, O. Guyen, and K. , The 2009 Frank Stinchfield Award: ???Hip Squeaking???: A Biomechanical Study of Ceramic-on-ceramic Bearing Surfaces, Clinical Orthopaedics and Related Research??, vol.87, issue.4, pp.345-350, 2010.
DOI : 10.1007/s11999-009-0911-x

P. Christel, A. Meunier, J. Dorlot, J. Crolet, J. Witvoet et al., Biomechanical Compatibility and Design of Ceramic Implants for Orthopedic Surgery, Annals of the New York Academy of Sciences, vol.7, issue.1 Bioceramics, pp.234-256, 1998.
DOI : 10.1111/j.1151-2916.1971.tb16014.x

D. Clarke and F. , Measurement of the Crystallographically Transformed Zone Produced by Fracture in Ceramics Containing Tetragonal Zirconia, Journal of the American Ceramic Society, vol.55, issue.6, pp.284-288, 1982.
DOI : 10.1021/ac50029a018

I. Clarke, Metastable Nature of Zirconia Femoral Heads From a 20-Year Perspective Of Clinical and Simulator Wear Studies, Seminars in Arthroplasty, vol.17, issue.3-4, pp.165-178, 2006.
DOI : 10.1053/j.sart.2006.09.012

I. Clarke, D. Green, P. Williams, K. Kubo, G. Pezzotti et al., Hip-simulator wear studies of an alumina-matrix composite (AMC) ceramic compared to retrieval studies of AMC balls with 1???7 years follow-up, Wear, vol.267, issue.5-8, pp.702-709, 2009.
DOI : 10.1016/j.wear.2009.02.018

V. Corfield, I. Khan, and R. Scott, Bioceramics and Alternative Bearings in Joint Arthroplasty, chap. Ceramics in Orthopaedics: Hydrothermal stability of ceramic femoral heads, 12th BIOLOX® Symposium Proceedings, pp.59-64, 2007.

P. Costigan, K. Deluzio, and U. Wyss, Knee and hip kinetics during normal stair. climbing. Gait and Posture, pp.31-37, 2002.
DOI : 10.1016/s0966-6362(01)00201-6
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.452.2081

R. Crowninshield, R. Johnston, J. Andrews, and R. Brand, A biomechanical investigation of the human hip, Journal of Biomechanics, vol.11, issue.1-2, pp.75-85, 1978.
DOI : 10.1016/0021-9290(78)90045-3

A. Dambreville, M. Philippe, and A. , Ray : La céramique de zircone ou «la nuit tous les chats sont gris», Maîtrise Orthopédique, p.78, 1998.

P. Damm, F. Graichen, A. Rohlmann, A. Bender, and G. Bergmann, Total hip joint prosthesis for in vivo measurement of forces and moments, Medical Engineering & Physics, vol.32, issue.1, pp.95-100, 2010.
DOI : 10.1016/j.medengphy.2009.10.003

D. Dennis, R. Komistek, J. Ochoa, E. Northcut, and C. , Hammill : In vivo determination of hip joint separation in subjects having either a metal-on-metal or metal-on-polyethylene THA, 46th Annual Meeting, 2000.

D. A. Dennis, R. Komistek, E. Northcut, J. A. Ochoa, and A. Ritchie, ???In vivo??? determination of hip joint separation and the forces generated due to impact loading conditions, Journal of Biomechanics, vol.34, issue.5, pp.623-629, 2001.
DOI : 10.1016/S0021-9290(00)00239-6

P. Devane, J. Horne, K. Martin, G. Coldham, and B. Krause, Three-dimensional polyethylene wear of a press-fit titanium prosthesis, The Journal of Arthroplasty, vol.12, issue.3, pp.256-266, 1997.
DOI : 10.1016/S0883-5403(97)90021-8

S. Deville, J. Chevalier, G. Fantozzi, J. Bartolomé, J. Requena et al., Low-temperature ageing of zirconia-toughened alumina ceramics and its implication in biomedical implants, Journal of the European Ceramic Society, vol.23, issue.15, pp.2975-2982, 2003.
DOI : 10.1016/S0955-2219(03)00313-3
URL : https://hal.archives-ouvertes.fr/hal-00475140

S. Deville, J. Chevalier, and L. Gremillard, Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia, Biomaterials, vol.27, issue.10, pp.2186-2192, 2006.
DOI : 10.1016/j.biomaterials.2005.11.021
URL : https://hal.archives-ouvertes.fr/hal-00436172

G. Duda, E. Schneider, and E. Chao, Internal forces and moments in the femur during walking, Journal of Biomechanics, vol.30, issue.9, pp.933-941, 1997.
DOI : 10.1016/S0021-9290(97)00057-2

A. Essner, K. Sutton, and A. Wang, Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings, Wear, vol.259, issue.7-12, pp.992-995, 2005.
DOI : 10.1016/j.wear.2005.02.104

P. Firkins, J. Tipper, E. Ingham, M. Stone, R. Farrar et al., A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis, Journal of Biomechanics, vol.34, issue.10, pp.1291-1298, 2001.
DOI : 10.1016/S0021-9290(01)00096-3

K. Fukatsu, G. Pezzotti, Y. Hayaishi, and N. , Evaluation of Phase Stability in Zirconia Femoral Heads From Different Manufacturers After In Vitro Testing or In Vivo Retrieval, The Journal of Arthroplasty, vol.24, issue.8, pp.1225-1230, 2009.
DOI : 10.1016/j.arth.2009.06.026

J. Geringer, Fretting corrosion de matériaux utilisés comme implants orthopédiques, Thèse de doctorat, École Nationale Supérieure des Mines de Saint Étienne. N°391 SGM, 2005.
DOI : 10.1533/9780857093738.3.401

L. Gladkis, R. Li, J. Scarvell, P. Smith, and H. , Exploration of the size, shape and abundance of UHMWPE wear particles using atomic force microscopy, Wear, vol.267, issue.1-4, pp.632-638, 2009.
DOI : 10.1016/j.wear.2008.11.024

U. Glitsch and W. Baumann, The three-dimensional determination of internal loads in the lower extremity, Journal of Biomechanics, vol.30, issue.11-12, pp.1123-1131, 1997.
DOI : 10.1016/S0021-9290(97)00089-4

P. Gomez and J. , Morcuende : Early attempts at hip arthroplasty 1700s to 1950s, The Iowa Orthopaedic Journal, vol.25, pp.25-29, 2005.

L. Gremillard, Relations microstructure-durabilité dans une zircone biomédicale, Thèse de doctorat, Institut National des Sciences Appliquées de Lyon . INSA N° 2002-ISAL-0026, 2002.

L. Gremillard, Zircone orthopédique, 2011.

L. Gremillard and J. Chevalier, Transformation de phase quadratique -monoclinique dans la zircone : Caractéristiques et implications, MECAMAT 09, 2009.

D. Gutknecht, Elaboration et caractérisation de micro-et nano-composites alumine-zircone pour application orthopédique, Thèse de doctorat, Institut National des Sciences Appliquées de Lyon. INSA. N° 2006-ISAL-0067, 2006.

K. Haraguchi, N. Sugano, T. Nishii, H. Miki, K. Oka et al., Phase transformation of a zirconia ceramic head after total hip arthroplasty, The Journal of Bone and Joint Surgery, vol.83, issue.7, pp.996-1000, 2001.
DOI : 10.1302/0301-620X.83B7.12122

A. Hatton, J. Nevelos, A. A. Nevelos, R. E. Banks, J. Fisher et al., Alumina???alumina artificial hip joints. Part I: a histological analysis and characterisation of wear debris by laser capture microdissection of tissues retrieved at revision, Biomaterials, vol.23, issue.16, pp.3429-3440, 2002.
DOI : 10.1016/S0142-9612(02)00047-9

P. Haudrechy, J. Foussereau, B. Mantout, and B. , Nickel release from nickel-plated metals and stainless steels, Contact Dermatitis, vol.35, issue.4, pp.249-255, 1994.
DOI : 10.1111/j.1600-0536.1994.tb01997.x

J. Hausselle, Etude de la dégradation par chocs de têtes et cupules de prothèses de hanche en biocéramique, Thèse de doctorat, École Nationale Supérieure des Mines de Saint Étienne. N°458 SGM, 2007.

J. Hausselle, S. Drapier, J. Geringer, M. Dursapt, J. Stolarz et al., Mod??lisation de la croissance de d??fauts dans des cupules de proth??ses de hanche en zircone soumises au ph??nom??ne de d??coaptation, M??canique & Industries, vol.9, issue.2, pp.153-158, 2008.
DOI : 10.1051/meca:2008020

M. Heller, G. Bergmann, G. Deuretzbacher, L. Durselen, M. Pohl et al., Musculo-skeletal loading conditions at the hip during walking and stair climbing, Journal of Biomechanics, vol.34, issue.7, pp.883-893, 2001.
DOI : 10.1016/S0021-9290(01)00039-2

M. Heller, G. Bergmann, J. Kassi, L. Claes, N. Haas et al., Determination of muscle loading at the hip joint for use in pre-clinical testing, Journal of Biomechanics, vol.38, issue.5, pp.1155-1163, 2005.
DOI : 10.1016/j.jbiomech.2004.05.022

P. Hernigou and T. Bahrami, Zirconia and alumina ceramics in comparison with stainless-steel heads, The Journal of Bone and Joint Surgery, vol.85, issue.4, pp.504-509, 2003.
DOI : 10.1302/0301-620X.85B4.13397

J. Jacobs, A. Shanbhag, T. Glant, J. Black, and J. Galante, Wear Debris in Total Joint Replacements, Journal of the American Academy of Orthopaedic Surgeons, vol.2, issue.4, pp.212-220, 1994.
DOI : 10.5435/00124635-199407000-00004

C. Jarrett, A. Ranawat, M. Bruzzone, J. Rodriguez, and C. , The Squeaking Hip: An Underreported Phenomenon of Ceramic-On-Ceramic Total Hip Arthroplasty, The Journal of Arthroplasty, vol.22, issue.2, p.302, 2007.
DOI : 10.1016/j.arth.2006.12.012

J. Keurentjes, R. Kuipers, D. Wever, and B. , High Incidence of Squeaking in THAs with Alumina Ceramic-on-ceramic Bearings, Clinical Orthopaedics and Related Research, vol.35, issue.2, pp.1438-1443, 2008.
DOI : 10.1007/s11999-008-0177-8

R. Komistek, L. Sedel, C. Hammill, E. Northcut, S. Walker et al., In vivo determination of hip joint separation in subjects having variable bearing surfaces, 48th Annual Meeting of the Orthopaedic Research Society, 2000.

B. C. Kowandy, H. Mazouz, and C. Richard, Isolation and analysis of articular joints wear debris generated in vitro, Wear, vol.261, issue.9, pp.966-970, 2006.
DOI : 10.1016/j.wear.2006.03.029

A. Kumar and K. , Biswas : Dry sliding wear of zirconia-toughened alumina with different metal oxide additives, Ceramics International, vol.35, pp.997-1002, 2008.

Y. Liao, H. Mckellop, Z. Lu, P. Campbell, and P. Benya, The effect of frictional heating and forced cooling on the serum lubricant and wear of UHMW polyethylene cups against cobalt???chromium and zirconia balls, Biomaterials, vol.24, issue.18, pp.3047-3059, 2003.
DOI : 10.1016/S0142-9612(03)00148-0

A. Lombardi, T. Mallory, D. Dennis, R. Komistek, R. Fada et al., An in vivo determination of total hip arthroplasty pistoning during activity, The Journal of Arthroplasty, vol.15, issue.6, pp.702-709, 2000.
DOI : 10.1054/arth.2000.6637

P. Lusty, C. Tai, R. Sew-hoy, W. Walter, W. Walter et al., Third-Generation Alumina-on-Alumina Ceramic Bearings in Cementless Total Hip Arthroplasty, The Journal of Bone and Joint Surgery-American Volume, vol.89, issue.12, pp.2676-2683, 2007.
DOI : 10.2106/JBJS.F.01466

E. A. Magnissalis, T. A. Xenakis, and C. , Wear of retrieved ceramic THA components? four matched pairs retrieved after 5-13 years in service, Journal of Biomedical Materials Research, vol.311, issue.5, pp.593-598, 2001.
DOI : 10.1002/jbm.1057

M. Manley and K. Sutton, Bearings of the Future for Total Hip Arthroplasty, The Journal of Arthroplasty, vol.23, issue.7, pp.47-50, 2008.
DOI : 10.1016/j.arth.2008.06.008

J. L. Masonis, R. B. Bourne, M. D. Ries, R. W. Mccalden, A. Salehi et al., Zirconia femoral head fractures, The Journal of Arthroplasty, vol.19, issue.7, pp.898-905, 2004.
DOI : 10.1016/j.arth.2004.02.045

B. Mavcic, B. Pompe, V. Antolic, M. Daniel, A. Iglic et al., Mathematical estimation of stress distribution in normal and dysplastic human hips, Journal of Orthopaedic Research, vol.25, issue.5, pp.1025-1030, 2002.
DOI : 10.1016/S0736-0266(02)00014-1

M. L. Mecartneyt and M. , Rühle : In situ transmission electron microscopy observations of the monoclinic to tetragonal phase transformation in tetragonal ZrO 2 . Arra metal, pp.1859-1863, 1989.

Y. Ming-qing, F. Shi-gang, Z. Lian-meng, and S. Shu-zhen, Mechanical properties of ZrO2 ceramic stabilized by Y2O3 and CeO2, Journal of Wuhan University of Technology-Mater. Sci. Ed., vol.77, issue.5, pp.14-18, 2002.
DOI : 10.1007/BF02832612

R. Murali, S. Bonar, G. Kirsh, W. Walter, and W. Walter, Osteolysis in Third-Generation Alumina Ceramic-on-Ceramic Hip Bearings With Severe Impingement and Titanium Metallosis, The Journal of Arthroplasty, vol.23, issue.8, 2008.
DOI : 10.1016/j.arth.2007.10.020

V. Naglieri, Alumina-Zirconia composites: elaboration and characterization, in view of the orthopaedic application, Thèse de doctorat, Institut National des Sciences Appliquées de Lyon, 2010.

J. Nevelos, E. Ingham, C. Doyle, R. Streicher, A. Nevelos et al., Microseparation of the centers of alumina-alumina artificial hip joints during simulator testing produces clinically relevant wear rates and patterns, The Journal of Arthroplasty, vol.15, issue.6, pp.793-795, 2000.
DOI : 10.1054/arth.2000.8100

H. Paqueton and J. , Ruste : Microscopie électronique à balayage : Images, applications et développements, pp.1-15, 2009.

H. Paqueton and J. , Ruste : Microscopie électronique à balayage : Principe et équipement, P, vol.865, issue.2, pp.1-16, 2009.

J. Paul, Forces transmitted by joints in the human body, Proceedings of the Institution of Mechanical Engineers, pp.8-15, 1967.
DOI : 10.1243/PIME_CONF_1966_181_201_02

J. Paul, Force Actions Transmitted by Joints in the Human Body, Proceedings of the Royal Society of London. Series B, pp.163-172, 1976.
DOI : 10.1098/rspb.1976.0004

L. Pidhorz, Mécanismes des descellements aseptiques au cours des prothèses totales cimentées de la hanche, Expansion Scientifique, 1993.

C. V. Raman and K. S. Krishnan, A New Type of Secondary Radiation, Nature, vol.121, issue.3048, 1928.
DOI : 10.1038/121501c0

E. Rixrath, S. Wendling-mansuy, X. Flecher, K. Kayvantash, P. Chabrand et al., Argenson : Etude de la formation de débris d'usure dans la prothèse totale de hanche par un modèle numérique particulaire, 18ème Congrès Français de Mécanique, 2007.

W. Roos and G. Wuite, Nanoindentation Studies Reveal Material Properties of Viruses, Advanced Materials, vol.14, issue.10-11, pp.1187-1192, 2009.
DOI : 10.1002/adma.200801709

J. O. Saenz, M. H. Rodriguez, A. P. Unzueta, and R. M. , Development of a hip wear simulation rig including micro-separation, Wear, vol.263, issue.7-12, pp.1527-1532, 2007.
DOI : 10.1016/j.wear.2007.01.097

E. Sanchez, Tratamiento de lesion del cartilago articular

E. Santos, S. Vohra, S. Catledge, M. Mcclenny, J. Lemons et al., Examination of surface and material properties of explanted zirconia femoral heads, The Journal of Arthroplasty, vol.19, issue.7, pp.30-34, 2004.
DOI : 10.1016/j.arth.2004.06.017

R. Schmidt and L. Künzi, Comportement des matériaux dans les milieux biologiques : applications en médecine et biotechnologie, 1999.

A. Seireg and R. , The prediction of muscular load sharing and joint forces in the lower extremities during walking, Journal of Biomechanics, vol.8, issue.2, pp.89-102, 1975.
DOI : 10.1016/0021-9290(75)90089-5

B. Stansfield, A. Nicol, J. Paul, I. Kelly, F. Graichen et al., Direct comparison of calculated hip joint contact forces with those measured using instrumented implants. An evaluation of a three-dimensional mathematical model of the lower limb, Journal of Biomechanics, vol.36, issue.7, pp.36929-936, 2003.
DOI : 10.1016/S0021-9290(03)00072-1

T. Stewart, J. Nevelos, J. Tipper, G. Insley, R. Streicher et al., Microseparation simulator wear study of different ceramic total hip replacement, 2000.

T. Stewart, J. Tipper, G. Insley, R. Streicher, E. Ingham et al., Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation, Journal of Biomedical Materials Research, vol.16, issue.2
DOI : 10.1002/jbm.b.10035

T. Stewart, J. Tipper, G. Insley, R. Streicher, E. Ingham et al., Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with microseparation, The Journal of Arthroplasty, vol.18, issue.6, pp.726-734, 2003.
DOI : 10.1016/S0883-5403(03)00204-3

M. Szutkowska and M. Boniecki, Subcritical crack growth in zirconia-toughened alumina (ZTA) ceramics, Journal of Materials Processing Technology, vol.175, issue.1-3, 2006.
DOI : 10.1016/j.jmatprotec.2005.04.030

K. Tahmasebi and M. , The effect of starch addition on solution combustion synthesis of Al2O3???ZrO2 nanocomposite powder using urea as fuel, Materials Chemistry and Physics, vol.109, issue.1, pp.156-163, 2008.
DOI : 10.1016/j.matchemphys.2007.11.009

S. Taylor, M. Manley, and K. Sutton, The Role of Stripe Wear in Causing Acoustic Emissions From Alumina Ceramic-On-Ceramic Bearings, The Journal of Arthroplasty, vol.22, issue.7, pp.47-51, 2007.
DOI : 10.1016/j.arth.2007.05.038

J. Tipper, P. Firkins, A. Besong, P. Barbour, J. Nevelos et al., Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator, Wear, vol.250, issue.1-12, pp.120-128, 2001.
DOI : 10.1016/S0043-1648(01)00653-6

J. Tipper, A. Hatton, J. Nevelos, E. Ingham, C. Doyle et al., Alumina???alumina artificial hip joints. Part II: Characterisation of the wear debris from in vitro hip joint simulations, Biomaterials, vol.23, issue.16, pp.3441-3448, 2002.
DOI : 10.1016/S0142-9612(02)00048-0

J. Uribe, J. Geringer, and B. Forest, Understanding the degradation mechanism of alumina hip prostheses subjected to shocks, Wear of Materials, WOM, 2011.

L. Uzdienski, FDA panel recommends DePuy's Ceramic-on-Metal Hip for approval, 2009.

W. Walter, G. Insley, W. Walter, and M. Tuke, Edge loading in third generation alumina ceramic-on-ceramic bearings, The Journal of Arthroplasty, vol.19, issue.4, pp.402-413, 2004.
DOI : 10.1016/j.arth.2003.09.018

W. Walter, P. Lusty, A. Watson, G. O-'toole, M. Tuke et al., Stripe Wear and Squeaking in Ceramic Total Hip Bearings, Seminars in Arthroplasty, vol.17, issue.3-4, pp.190-195, 2006.
DOI : 10.1053/j.sart.2006.09.015

W. Walter, G. O-'toole, W. Walter, A. Ellis, and B. , Squeaking in Ceramic-on-Ceramic Hips, The Journal of Arthroplasty, vol.22, issue.4, pp.496-503, 2007.
DOI : 10.1016/j.arth.2006.06.018

D. Williams, The delicated balancing act of metallic biomaterials. Medical Device Technology, mars-avril, pp.8-10, 2009.

D. Williams, On the mechanisms of biocompatibility, Biomaterials, vol.29, issue.20, pp.2941-2953, 2009.
DOI : 10.1016/j.biomaterials.2008.04.023

C. Wulfman, M. Sadoun, and M. L. De-la-chapelle, Interest of Raman spectroscopy for the study of dental material: The zirconia material example, IRBM, vol.31, issue.5-6, pp.257-262, 2010.
DOI : 10.1016/j.irbm.2010.10.004
URL : https://hal.archives-ouvertes.fr/hal-00583315

. Speciality, Materials engineering Keywords : shocks, alumina, zirconia, ageing, retrieval