H. Cross-sections-generation and .. , 42 3.1.2 Full-Core Calculation, p.48

C. Analysis and .. Steady-state-reactor, 62 3.5.1 Cylindrical Core Containing a Single Pebble Type, p.63

A. Core, C. Six-pebble-types, and .. , 65 3.5.2.1 Analysis of Pebbles Spatial Discretization, p.72

V. Verification, 79 4.1 Verification of APOLLO2 Double-Heterogeneity Treatment 81 4.2 Verification of the Developed Method by Monte Carlo Simulations 82 4.2.1 TRIPOLI4 Reactor Model, 94 4.2.3.2 Heterogeneous Core with Homogeneous Spectrum Zones ........ 95 4.2.3.3 Single Type Individually Positioned Pebbles

G. P. Greyvenstein, HTGR Thermal-Fluid Analysis, 2006.

U. Colak, HTR Concepts Article of the HTR Fuel Factbook 1, 2006.

R. F. Turner, D. L. Hanson, D. W. Mceachern, and A. Shenoy, Design Basis for Hexagonal Block Fuel Element, Article of the HTR Fuel Factoook, vol.1, issue.3, 2006.

J. Engelhard, Final report on the construction, start-up and first period of operation of the AVR experimental power plant, pp.72-95, 1972.

K. Kugeler, Reactor Safety, 2005.

G. H. Lohnert, Technical design features and essential safety-related properties of the HTR-module, Nuclear Engineering and Design, vol.121, issue.2, p.121, 1990.
DOI : 10.1016/0029-5493(90)90111-A

E. J. Mulder, General Overview of the Pebble Bed Modular Reactor " , Lecture Notes of the course " Pebble Bed Reactor Design, 2006.

J. Wang and R. G. Ballinger, Fracture Mechanics Based Coated Particle Fuel Failure Models, Proc. of HTR, 2004.

L. Van-der-merwe, W. Theron, and J. Slabber, Technical Description of the PBMR Power Plant, 2005.

D. Petti, Fuel Failure Mechanisms, Article of the HTR Fuel Factbook, vol.1, issue.3, 2006.

J. Slabber, Pebble Fuel Advantages, Proc. of HTR, 2004.

H. J. Maclean and R. G. Ballinger, Silver Ion Implantation and Annealing in CVD Silicon Carbide: the Effect of Temperature on Silver Migration, Proc. of HTR, 2004.

J. M. Kendall and R. E. Bullock, Advanced Coated Particle Fuel Options, Proc. of HTR, 2004.

D. Matzner, PBMR Project Status and the Way Ahead, Proc. of HTR, 2004.

P. J. Venter and M. N. Mitchell, Integrated design approach of the pebble BeD modular reactor using models, Nuclear Engineering and Design, vol.237, issue.12-13, p.237, 2007.
DOI : 10.1016/j.nucengdes.2006.10.008

Z. Zhang, Z. Wu, D. Wang, Y. Xu, Y. Sun et al., Current status and technical description of Chinese 2 x 250 MW th HTR-PM demonstration plant, Nucl. Eng. and Design, p.239, 2009.

J. Slabber, PBMR Nuclear Material Safeguards, Proc. of HTR, 2004.

F. Reitsma, The Pebble Bed Modular Reactor Layout and Neutronics Design of the Equilibrium Cycle, Proc. of PHYSOR, 2004.

C. Stoker, PBMR Nuclear Design and Safety Analysis: An Overview, Proc. of PHYSOR, 2006.

G. Strydom, Xenon-induced axial power oscillations in the 400 MW pebble bed modular reactor, 2008.

A. Ooms, Pebble flow in a High Temperature Reactor, 2008.

C. H. Rycroft, G. S. Grest, J. W. Landry, and M. Z. Bazant, Analysis of granular flow in a pebble-bed nuclear reactor, Physical Review E, vol.74, issue.2, p.74, 2006.
DOI : 10.1103/PhysRevE.74.021306

R. Sanchez, M. Zmijarevic, E. Coste-delclaux, S. Masiello, E. Santandrea et al., APOLLO2 YEAR 2010, Nuclear Engineering and Technology, vol.42, issue.5
DOI : 10.5516/NET.2010.42.5.474

S. Loubière, R. Sanchez, M. Coste, A. Hebert, and Z. Stankovski, APOLLO2 Twelve Years Later, Proc. of M&C'99, 1999.

R. Sanchez, J. Mondot, Z. Stankovski, A. Cossic, and I. Zmijarevic, APOLLO II: A User-Oriented, Portable, Modular Code for Multigroup Transport Assembly Calculations, Nuclear Science and Engineering, vol.100, issue.3, 1988.
DOI : 10.13182/NSE88-3

H. Golfier, R. Lenain, C. Calvin, J. Lautard, A. Baudron et al., APOLLO3: A Common Pprojectof CEA, AREVA and EDF for the Development of a New Deterministic Multi-purpose Code for Core Physics Analysis, Proc. of M&C, 2009.

P. Bellier, M. Coste, A. Hébert, R. Sanchez, Z. Stankovski et al., APOLLO2.5: Notice théorique, pp.99-2719, 2002.

A. Hébert, Applied Reactor Physics, Presses Internationales Polytechnique, 2009.

R. Sanchez and A. Chetaine, A Synthetic Acceleration for a Two-Dimensional Characteristic Method in Unstructured Meshes, Nuclear Science and Engineering, vol.136, issue.1, p.136, 2000.
DOI : 10.13182/NSE136-122

A. Kavenoky and R. Sanchez, The APOLLO assembly spectrum code, Proc. of M&C '87, 1987.

C. J. Dean and R. J. Perry, Weighting spectra for the Xmas group scheme, Winfrith Technology Center, 1990.

A. Santamarina and N. Hfaiedh, Determination of the Optimized SHEM Mesh For Neutron Transport Calculations, International Conference on Mathematics and Computation, 2005.

R. Sanchez and J. Mondot, A model for calculating multigroup self-shielded cross sections for a mixture of resonant absorbers in heterogeneous media, Proc. of Mtg. on Advances in Reactor Physics and Radiation Protection and Shielding, 1984.

R. Sanchez, M. Coste, Z. Stankovski, and C. Van-der-gucht, Model for multi-group self-shielded crosssections calculations in the code APOLLO2, Proc. Int Conf. on the Physics of Reactors: Operation, Design and Computation, 1990.

M. Livolant and F. Jeanpierre, Autoprotection des resonances dans les réacteurs nucléaires. Application aux isotopes lourds, 1974.

M. Coste-delclaux and S. Mengelle, New reasonant mixture self-shielding treatment in the code APOLLO2, Proc. of PHYSOR, 2004.

M. Coste-delclaux, Modélisation du phénomène d'autroprotection dans le code de transport multigroupe APOLLO2, 2006.

A. Hébert and G. Mathonnière, Development of a third-generation superhomogenization method for the homogenization of a pressurized water reactor assembly, Nucl. Sci. Eng, p.115, 1993.

E. E. Lewis and W. F. Miller, Computational methods of neutron transport, 1993.

R. Sanchez and G. C. Pomraning, A statistical analysis of the double heterogeneity problem, Annals of Nuclear Energy, vol.18, issue.7, p.18, 1991.
DOI : 10.1016/0306-4549(91)90073-7

A. Hébert, A Collision Probability Analysis of the Double-Heterogeneity Problem, Nuclear Science and Engineering, vol.115, issue.2, 1993.
DOI : 10.13182/NSE115-177

H. Bateman, Solution of a System of Differential Equations Occurring in the Theory of Radioactive Transformations, Proc. of Cambridge Philos, p.15, 1910.

L. Massimo, Physics of High-Temperature Reactors, 1976.

P. Mondot and R. Sanchez, An iterative homogenization technique that preserves assembly core exchanges, Proc. of SNA Conference, 2003.

E. Teuchert, U. Hansen, and K. Haas, VSOP ? Computer Code System for Reactor Physics and Fuel Cycle Simulations, p.1649, 1980.

F. Reitsma, H. J. Rütten, and W. Sherer, An Overiew of the FZJ Tools for HTR Core Design and Reactor Dynamics, the Past, Present and Future, Proc. of M&C 2005, 2005.

J. Oppe, J. B. De-haas, and J. C. Kuijper, PANTHERMIX (PANTER-THERMIX) User Manual, 1998.

P. K. Hutt, The UK Core Performance Package, Nucl. Energy, p.30, 1991.

S. Struth and F. Jülich, Thermix ? Direkt: Ein rechenprogramm zur instationären zweidimensionalen simulation thermohydraulischer transienten

B. Boer, D. Lathouwers, M. Ding, and J. L. Kloosterman, Coupled neutronics / thermal hydraulics calculations for High Temperature Reactors with the DALTON ? THERMIX code system, Proc. of PHYSOR, 2008.

M. Ougouag and W. K. Terry, NGNP Preliminary Point Design, -Results of the Initial Neutronics and Thermal-Hydraulic Assessment, 2003.

W. K. Terry, H. D. Gougar, and A. M. Ougouag, Direct deterministic method for neutronics analysis and computation of asymptotic burnup distribution in a recirculating pebble-bed reactor, Annals of Nuclear Energy, vol.29, issue.11, p.29, 2002.
DOI : 10.1016/S0306-4549(01)00110-4

D. Mathews, An improved version of the MICROX-2 code, 1997.

R. A. Grimesey, D. W. Nigg, and R. L. Curtis, COMBINE/PC ? A Portable ENDF/B Version 5 Neutron Spectrum and Cross Section Generation Program, 1990.

B. Boer and A. M. Ougouag, Core analysis, design and optimization of a deep-burn pebble bed reactor, Proc. of PHYSOR 2010, 2010.

H. C. Lee, C. K. Jo, and J. M. Noh, Development of the HELIOS/CAPP code system for the analysis of pebble type VHTR cores, Proc. of PHYSOR 2010, 2010.
DOI : 10.1016/j.anucene.2014.04.003

R. M. Westfall and M. A. Bjerke, An interface-current integral transport model for treating doublyheterogeneous , multisystem geometries, Oak Ridge National Laboratory report, pp.790406-790423

R. M. Westfall, Resolved Resonance Processing in the AMPX Modular Code System, Oak Ridge National Laboratory report ORNL, p.41, 1978.

L. W. Nordheim and G. F. Kuncir, A program of research and calculations of resonance absorption, General Atomics ?, vol.2527, p.4500, 1961.

L. W. Nordheim, G. Birkhoff, and E. P. Wigner, The theory of resonance absorption, Am. Math. Soc, 1961.
DOI : 10.1090/psapm/011/9987

S. M. Dancoff and M. Gisburg, Surface resonance absorption in a close-packed lattice, p.2157, 1944.

J. B. De-haas and J. C. Kuijper, Feasibility of burning first-and second-generation plutonium in pebble bed high temperature reactors, Nuclear Technology, p.151, 2005.

E. E. Bende, Plutonium Burning in a Pebble-Bed Type High Temperature Nuclear Reactor, 2000.

E. E. Bende, A. H. Hogenbirk, J. L. Kloosterman, and H. Van-dam, Analytical Calculation of the Average Dancoff Factor for a Fuel Kernel in a Pebble-Bed High Temperature Reactor, Nucl. Sci. Eng, vol.133, 1999.

R. Rühle, RSYST, ein integriertes Modulsystem mit Datenbasis zur automatisierten Berechnung von Kernreaktoren, pp.4-12, 1973.

V. Drüke, D. Filges, R. D. Neef, N. Paul, and H. Schall, Experiments on Inhomogeneous Fuel Loading at the Critical HTGR Test Facility KAHTER: A Study for the Future Loading Concept of Pebble-Bed Reactors, Nucl. Sci. Eng, p.97, 1987.

M. Ding, B. Boer, J. L. Kloosterman, and D. Lathouwers, Evaluation of experiments in the AVR with the DALTON???THERMIX coupled code system, Nuclear Engineering and Design, vol.239, issue.12, p.239, 2009.
DOI : 10.1016/j.nucengdes.2009.09.028

I. I. Bondarenko, Group Constants for Nuclear Reactor Calculations, Authorised Translation from the Russian, 1964.

B. Boer, D. Lathouwers, J. L. Kloosterman, T. H. Van-der-hagen, and G. Strydom, Validation of the DALTON-THERMIX code system with transient analyses of the HTR-10 and application to the PBMR, Nucl. Technology, p.170, 2010.

S. Goluoglu, Analysis of a Computational Benchmark for a High-Temperature Reactor Using SCALE, Proc. of PHYSOR, 2006.

E. E. Sunny and G. Ilas, SCALE 6 analyses of HTR-10 pebble-bed reactor for initial critical configuration, Proc. of PHYSOR 2010, 2010.

M. L. Williams and M. Asgari, Computation of Continuous-Energy Neutron Spectra with Discrete Ordinates Transport Theory, Nuclear Science and Engineering, vol.121, issue.2, p.121, 1995.
DOI : 10.13182/NSE95-1

G. Ilas, N. H. Hudson, F. Rahnema, A. M. Ougouag, and H. G. Gougar, On the few-group cross-section generation methodology for PBR analysis, Annals of Nuclear Energy, vol.33, issue.11-12, p.33, 2006.
DOI : 10.1016/j.anucene.2006.02.014

N. H. Hudson, A. M. Ougouag, F. Rahnema, and H. G. Gougar, A Pebble Bed Reactor cross section methodology, Annals of Nuclear Energy, vol.36, issue.8, p.36, 2009.
DOI : 10.1016/j.anucene.2009.04.013

H. D. Gougar, Results of a Neutronic Simulation of the HTR-Poteus Core 4.2 Using PEBBED and Other INL Reactor Physics Tools, INL Report FY, p.9, 2009.

H. D. Gougar, A. M. Ougouag, and W. Yoon, Multiscale Cross Section Generation for Pebble Bed Reactors ? a Review/Preview, 2010.

J. L. Kloosterman and A. M. Ougouag, Comparison and Extension of Dancoff Factors for Pebble-Bed Reactors, Nucl. Sci. Eng, vol.157, 2007.

H. Gerwin and W. Sherer, Treatment of the Upper Cavity in a Pebble-Bed High-Temperature Gas-Cooled Reactor by Diffusion Theory, Nucl. Sci. Eng, p.97, 1987.

J. Lieberoth and A. Stojadinovíc, Neutron Streaming in Pebble Beds, Nucl. Sci. Eng, p.76, 1980.

B. Tyobeka, K. Ivanov, and A. Pautz, Utilization of two-dimensional deterministic transport methods for analysis of pebble-bed reactors, Annals of Nuclear Energy, vol.34, issue.5, p.34, 2007.
DOI : 10.1016/j.anucene.2007.01.014

J. O. Johnson, A users manual for Mash 1.0, a Monte Carlo adjoint shielding code system" (contains the documentation for DORT), Oak Ridge National Laboratory Report ORNL, p.11778, 1992.

B. Tyobeka and K. Ivanov, Analysis of the PBMR-268 benchmark transient cases with the NEM-THERMIX coupled code, Transactions of the ANS Winter Meeting, 2004.

V. Kulik and R. Sanchez, Core Homogenization Method for Pebble Bed Reactors, Proc. of M&C 2005, 2005.

. Tripoli-project and . Team, TRIPOLI-4 version 4 user guide, p.6169, 2008.

F. Reitsma and W. R. Joubert, Investigation of the Power Peaking in the PBMR Pebble Bed Reactor, Proc. of M&C 2005, 2005.

M. Grimod, Z. Karriem, W. R. Joubert, and F. Reitsma, Analysis of the Neutron Flux Spectral Differences and Effects on the Depletion in the Fuel Kernels of the PBMR Fuel Spheres, Proc. of ICAPP, 2007.

A. M. Ougouag, H. D. Gougar, W. K. Terry, F. Reitsma, and W. R. Joubert, PEBBED analysis of hot spots in pebble-bed reactor, Proc. of M&C 2005, 2005.

J. J. Duderstadt and J. Hamilton, Nuclear Reactor Analysis, 1976.

X. Raepsaet, Physics of the High Temperature Gas-Cooled Reactor Core, Presentation at 1 st Eurocourse on V/HTR, 2007.

N. Fujimoto, N. Nojiri, and K. Yamashita, Validation of the nuclear design code system for the HTTR using the criticality assembly VHTRC, Nuclear Engineering and Design, vol.233, issue.1-3, p.233, 2004.
DOI : 10.1016/j.nucengdes.2004.08.005

A. Santamarina and D. Bernard, The recommended JEFF3.1.1 file and CEA2005V4 library for accurate neutronic Calculations, Note Technique DER, pp.8-10

G. Ilas, F. Rahnema, and A. M. Ougouag, Effect of Fuel Particles Distribution Model on PBR Cell Parameters, Trans. of the ANS, vol.92, pp.654-656, 2005.

F. Damian, Analyses des capacités des réacteurs à haute temperature sous l'aspect de l'utilisation des matières fissiles, 2002.

H. Chang, X. Raepsaet, and F. Damian, Analysis of HTR-10 First Criticality with Monte Carlo Code Tripoli- 4.3, Proc. of HTR2004 Conf, 2004.

F. C. Difilippo, Monte Carlo Calculations of Pebble Bed Benchmark Configurations of the PROTEUS Facility, Nuclear Science and Engineering, vol.143, issue.3, p.143, 2003.
DOI : 10.13182/NSE02-34

U. Colak and V. Seker, Monte Carlo Criticality Calculations for a Pebble Bed Reactor with MCNP, Nucl. Sci. Eng, p.149, 2005.

S. Sen, F. Albornoz, and F. Reitsma, Comparison of VSOP and MCNP Results of PBMR Equilibrium Core Model, Proc. of HTR2006, 2006.

H. Jeong and S. H. Chang, Development of a method of evaluating an inventory of fission products for a pebble bed reactor, Annals of Nuclear Energy, vol.35, issue.12, p.35, 2008.
DOI : 10.1016/j.anucene.2008.10.001

R. Mphahlele, A. M. Ougouag, K. N. Ivanov, and H. D. Gougar, Spectral zone selection methodology for pebble bed reactors, Proc. of PHYSOR2008, Interlaken, 2008.
DOI : 10.1016/j.anucene.2010.08.014

E. Richebois, Calcul de coeur REP en transport 3D, 1999.

G. Atomics, Gas Turbine Modular Helium Reactor conceptual design reportVerification du schéma de référence optimisé REL2005 pour le calcul des assemblages REP UOX en evolution, 1996.

C. C. Stoker and F. Reitsma, PBMR Fuel Spheres Source Terms, Proc. of HTR2004, 2004.

A. M. Ougouag, J. J. Cogliati, and J. L. Kloosterman, Methods for modeling the packing of fuel elements in pebble bed reactors, 2005.

J. J. Lautard, S. Loubière, and C. Magnaud, CRONOS, A Modular Computational System for Neutronic Core Calculations, IAEA Specialists Meeting, p.France, 1990.

R. S. Varga, Matrix iterative Analysis, N. J, 1962.
DOI : 10.1007/978-3-642-05156-2
URL : http://hdl.handle.net/2027/mdp.39015000491780

M. L. Adams and E. W. Larsen, Fast iterative methods for discrete-ordinates particle transport calculations, Progress in Nuclear Energy, vol.40, issue.1, p.1, 2002.
DOI : 10.1016/S0149-1970(01)00023-3

G. J. Auwerda, J. L. Kloosterman, D. Lathouwers, and T. H. Van-der-hagen, Effects of random pebble distribution on the multiplication factor in HTR pebble bed reactors, Annals of Nuclear Energy, vol.37, issue.8, 2010.
DOI : 10.1016/j.anucene.2010.04.008

X. Jing, X. Xu, Y. Yang, and R. Qu, Prediction calculations and experiments for the first criticality of the 10 MW High Temperature Gas-cooled Reactor-Test Module, Nuclear Engineering and Design, vol.218, issue.1-3, p.218, 2002.
DOI : 10.1016/S0029-5493(02)00184-X

. Briesmeister, MCNP ? A General Monte Carlo N-Particle Transport Code. Version 4C, p.13709

Y. Yang, Z. Luo, X. Jing, and Z. Wu, Fuel management of the HTR-10 including the equilibrium state and the running-in phase, Nuclear Engineering and Design, vol.218, issue.1-3, p.218, 2002.
DOI : 10.1016/S0029-5493(02)00183-8

B. Boer, J. L. Kloosterman, D. Lathouwers, and T. H. Van-der-hagen, In-core fuel management optimization of pebble-bed reactors, Annals of Nuclear Energy, vol.36, issue.8, p.36, 2009.
DOI : 10.1016/j.anucene.2009.06.008

M. G. Izenson, Effects of Fuel Particle and Reactor Core Design on Modular HTGR Source Terms, Massachusetts Institute of technology, p.US, 1986.

H. D. Gougar, F. Reitsma, and W. Joubert, A Comparison of Pebble Mixing and Depletion Algorithms Used in Pebble-Bed Reactor Equilibrium Cycle Simulation, M&C2009 Conference, 2009.

P. H. Liem, BATAN-MPASS: A general fuel management code for pebble-bed high-temperature reactors, Annals of Nuclear Energy, vol.21, issue.5, 1994.
DOI : 10.1016/0306-4549(94)90012-4

H. Sekimoto, T. Obara, S. Yukinori, and E. Suetomi, New Method to Analyze Equilibrium Cycle of Pebble-Bed Reactors, Journal of Nuclear Science and Technology, vol.7, issue.10, p.24, 1987.
DOI : 10.1080/18811248.1987.9735880

H. D. Gougar, W. K. Terry, and A. M. Ougouag, Matrix formulation of pebble circulation in the PEBBED code, Proc. of the HTR-2002 meeting, 2002.
DOI : 10.2172/910663

H. D. Gougar, A. M. Ougouag, W. K. Terry, and K. N. Ivanov, Design of Pebble-Bed reactors using genetic algorithms, Proc. of HTR 2004 Conference, 2004.

H. D. Gougar, A. M. Ougouag, and W. K. Terry, Automated Design and Optimization of Pebble-Bed Reactor Cores, Nucl. Sci. Eng, p.165, 2010.

H. C. Lee, C. K. Jo, and J. M. Noh, Development of the HELIOS/CAPP code system for the analysis of pebble type VHTR cores, Proc. of PHYSOR 2010, 2010.
DOI : 10.1016/j.anucene.2014.04.003

M. Fratoni and E. Greespan, Determination of the equilibrium compositions of cores with continuous fuel feed and removal using MOCUP, Proc. of M&C + SNA 2007, 2007.

E. Bomboni, N. Cerullo, E. Fridman, G. Lomonaco, and E. Shwageraus, Comparison among MCNP-based depletion codes applied to burnup calculations of pebble-bed HTR lattices, Nuclear Engineering and Design, vol.240, issue.4, p.240, 2010.
DOI : 10.1016/j.nucengdes.2009.12.006

B. Bonin and D. Greneche, Prospective studies of HTR fuel cycles involving plutonium, Proc. of HTR2002 Conference, 2002.

H. Hansen, Plutonium in high temperature reactors, DRAGON project report, vol.899, 1974.

A. Talamo, W. Gudowski, J. Cetnar, and F. Venneri, Key physical parameters and temperature reactivity coefficients of the deep burn modular helium reactor fueled with LWRs waste, Annals of Nuclear Energy, vol.31, issue.16, p.31, 2004.
DOI : 10.1016/j.anucene.2004.05.006

C. Hong, Y. Yongwei, J. Xingqing, and X. Yunlin, Thorium-Based Fuel Cycles in the Modular High Temperature Reactor, Tsinghua Science and Technology, p.11, 2006.

A. Meier, W. Bernnat, K. Hossain, and G. Lohnert, Analysis of High Temperature Pebble Bed Reactors with Plutonium Fuel, Proc. of M&C, 2009.

E. Mulder and E. Teuchert, Plutonium disposition in the PBMR-400 High-Temperature Gas-Cooled Reactor, Proc. of PHYSOR, 2004.

J. B. De-haas, J. C. Kuijper, and J. Oppe, Burnup and transient analysis of a HTR-400 design loaded with PuO 2, Proc. of HTR2006 Conference, 2006.

B. Boer and A. M. Ougouag, Core analysis, design and optimization of a deep-burn pebble bed reactor, Proc. of PHYSOR 2010, 2010.

E. Mulder and E. Teuchert, Characteristics of a different fuel cycle in a PBMR-400 for burning reactor grade plutonium, Nuclear Engineering and Design, vol.238, issue.11, p.238, 2008.
DOI : 10.1016/j.nucengdes.2008.01.023

J. L. Kloosterman, Application of boron and gadolinium burnable poison particles in UO2 and PUO2 fuels in HTRs, Annals of Nuclear Energy, vol.30, issue.17, p.30, 2003.
DOI : 10.1016/S0306-4549(03)00134-8

J. Jonnet, J. L. Kloosterman, and B. Boer, Performance of TRISO particles fueled with plutonium and minor actinides in a PBMR-400 core design, Nuclear Engineering and Design, vol.240, issue.6, p.240, 2010.
DOI : 10.1016/j.nucengdes.2010.03.012

F. Damian, VHTR core preliminary analysis using NEPHTIS3 / CAST3M coupled modeling, Proc. of HTR-2008, 2008.

I. Limaiem, F. Damian, X. Raepsaet, and E. Studer, VHTR core modeling: coupling between neutronics and thermal hydraulics, Proc. of M&C 2005, 2005.

E. Studer, CAST3M/ARCTURUS: A coupled heat transfer CFD code for thermal???hydraulic analyzes of gas cooled reactors, Nuclear Engineering and Design, vol.237, issue.15-17, p.237, 2007.
DOI : 10.1016/j.nucengdes.2007.03.016

N. N. Ponomarev-stepnoi, N. E. Kukharkin, A. A. Bobrov, E. I. Chunaiev, V. P. Garin et al., Experiments on HTR criticality parameters at the ASTRA facility of the Kurchatov Institute, Proc. of HTR-2002 Monte Carlo Simulation of the Chord Length Distribution Function Across Convex Bodies, Non-Convex Bodies and Random Media IV IMACS Seminar on Monte Carlo Method, 2002.
DOI : 10.1016/S0029-5493(03)00013-X