N. Antoni and F. Gaisne, Analytical modelling for static stress analysis of pin-loaded lugs with bush fitting, Applied Mathematical Modelling, vol.35, issue.1, 2010.
DOI : 10.1016/j.apm.2010.05.002

J. A. Araujo and D. Nowell, Analysis of pad size effects in fretting fatigue using short crack arrest methodologies, International Journal of Fatigue, vol.21, issue.9, pp.947-956, 1999.
DOI : 10.1016/S0142-1123(99)00077-8

J. A. Araujo and D. Nowell, The effect of rapidly varying contact stress fields on fretting fatigue, International Journal of Fatigue, vol.24, issue.7, pp.763-75, 2002.
DOI : 10.1016/S0142-1123(01)00191-8

J. A. Araujo, L. Susmel, D. Taylor, J. Ferro, and E. Mamiya, On the use of the Theory of Critical Distances and the Modified W??hler Curve Method to estimate fretting fatigue strength of cylindrical contacts, International Journal of Fatigue, vol.29, issue.1, pp.95-107, 2007.
DOI : 10.1016/j.ijfatigue.2006.02.041

J. A. Araujo, L. Susmel, D. Taylor, J. Ferro, and J. Ferreira, On the prediction of high-cycle fretting fatigue strength: Theory of critical distances vs. hot-spot approach, Engineering Fracture Mechanics, vol.75, issue.7, pp.1763-1778, 2008.
DOI : 10.1016/j.engfracmech.2007.03.026

J. A. Araujo and D. Nowell, Mixed high low fretting fatigue of Ti6Al4V: Tests and modelling, Tribology International, vol.42, issue.9, pp.1276-1285, 2009.
DOI : 10.1016/j.triboint.2009.04.024

A. Banvillet, P. Luc, T. Lasserre, and S. , A volumetric energy based high cycle multiaxial fatigue citerion, International Journal of Fatigue, vol.25, issue.8, pp.755-769, 2003.
DOI : 10.1016/S0142-1123(03)00048-3
URL : https://hal.archives-ouvertes.fr/hal-01372060

B. B. Bartha, T. Nicholas, and T. Farris, Modeling of geometry effects in fretting fatigue, Tribology International, pp.1131-1141, 2006.

A. Bernasconi and I. Papadopoulos, Efficiency of algorithms for shear stress amplitude calculation in critical plane class fatigue criteria, Computational Materials Science, vol.34, issue.4, pp.355-368, 2005.
DOI : 10.1016/j.commatsci.2005.01.005

G. Bertolino, A. Constantinescu, M. Ferjani, and P. Treiber, A multiscale approach of fatigue and shakedown for notched structures, Theoritical and applied fracture mechanics, pp.140-151, 2007.
DOI : 10.1016/j.tafmec.2007.05.002
URL : https://hal.archives-ouvertes.fr/hal-00167744

T. Billaudeau, Fatigue multiaxiale des matériaux à défauts: mécanismes et critère d'endurance, 2002.

R. Bramhall, Studies in fretting fatigue, 1973.

A. Buch, Fatigue and fretting of pin-lug joints with and without interference fit, Wear, vol.43, issue.1, pp.9-16, 1976.
DOI : 10.1016/0043-1648(77)90038-2

C. Buque, Persistent slip bands in cyclically deformed nickel polycrystals, International Journal of Fatigue, vol.23, issue.6, pp.459-466, 2001.
DOI : 10.1016/S0142-1123(01)00013-5

A. Buch, Fatigue strength calculation, 1988.

C. Cattaneo and . Sul-conttata-di-due-corpi-elastici, distribuzione locale degli sforzi. Rendiconti dell, Accademia dei Lincei, vol.6, pp.343-351, 1938.

S. Chan, Roles of microstructure in fatigue crack initiation, International Journal of Fatigue, vol.32, issue.9, pp.1428-1447, 2010.
DOI : 10.1016/j.ijfatigue.2009.10.005

T. N. Chakherlou, M. Mirzajanzadeh, B. Abazadeh, and K. Saeedi, An investigation about interference fit effect on improving fatigue life of a holed single plate in joints, European Journal of Mechanics - A/Solids, vol.29, issue.4, pp.675-682, 2010.
DOI : 10.1016/j.euromechsol.2009.12.009

B. Crossland, Effect of large hydrostatic pressure on the torsional fatigue strength of an alloy steel, in proc. of int. conf. on fatigue of metals, 1959.

D. Van and K. , Sur la résistance à la fatigue des métaux, Thèse de doctorat, 1973.

P. Davoli, A. Bernasconi, M. Filippini, S. Foletti, and I. Papadopoulos, Independence of the torsional fatigue limit upon a mean shear stress, International Journal of Fatigue, vol.25, issue.6, pp.471-480, 2003.
DOI : 10.1016/S0142-1123(02)00174-3

E. M. Eden, W. N. Rose, and F. Cunningham, The endurance of metals, Proceedings of the Institute of Mechanical Engineers, pp.839-974, 1911.

W. Eichlseder, Fatigue analysis by local stress concept based on finite element results, Computers & Structures, vol.80, issue.27-30, pp.2109-2113, 2002.
DOI : 10.1016/S0045-7949(02)00273-0

E. Essmann and H. Mughrabi, Annihilation of dislocations during tesile and cyclic deformation and limits of dislocation densities, Phil. Mag. A, vol.171, pp.731-756, 1979.

L. J. Fellows, D. Nowell, and D. Hills, Contact stresses in a moderately thin strip (with particular reference to fretting experiments), Wear, vol.185, issue.1-2, pp.235-238, 1995.
DOI : 10.1016/0043-1648(95)06613-6

M. E. Fine and R. Ritchie, Fatigue-crack initiation and near-threshold crack growth, Fatigue and microstructure. Metals Park (OH): ASM, pp.245-78, 1978.

P. Forsyth, The application of 'fractography' to fatigue failure investigations, Royal Aircraft Est., Tech Note Met, vol.257, 1957.

S. Fouvry, K. Ph, L. Vincent, D. Van, and K. , Theoretical analysis of fatigue cracking under dry friction for fretting loading conditions, Wear, vol.195, issue.1-2, pp.21-34, 1996.
DOI : 10.1016/0043-1648(95)06741-8
URL : https://hal.archives-ouvertes.fr/hal-00111563

S. Fouvry, P. Kapsa, and L. Vincent, Quantification of fretting damage, Wear, vol.200, issue.1-2, pp.186-205, 1996.
DOI : 10.1016/S0043-1648(96)07306-1

S. Fouvry, K. Ph, F. Sidoroff, and L. Vincent, Identification of the characteristic length scale for fatigue cracking in fretting contacts, Le Journal de Physique IV, vol.08, issue.PR8, pp.8-159, 1998.
DOI : 10.1051/jp4:1998820

S. Fouvry, K. Ph, and L. Vincent, Fretting-Wear and Fretting-Fatigue: Relation Through a Mapping Concept, 2000.
DOI : 10.1520/STP14721S

S. Fouvry, K. Ph, and L. Vincent, A Multiaxial Fatigue Analysis of Fretting Contact Taking Into Account the Size Effect, ASTM STP, vol.1367, pp.167-82, 2000.
DOI : 10.1520/STP14728S

S. Fouvry, K. Elleuch, and S. G. , Prediction of crack nucleation under partial slip fretting conditions, The Journal of Strain Analysis for Engineering Design, vol.198, issue.6, pp.549-64, 2002.
DOI : 10.1243/030932402320950152

S. Fouvry, P. Duo, and P. Ph, A quantitative approach of Ti???6Al???4V fretting damage: friction, wear and crack nucleation, Wear, vol.257, issue.9-10, pp.916-929, 2004.
DOI : 10.1016/j.wear.2004.05.011

C. Froustey and S. Lasserre, Multiaxial fatigue endurance of 30NCD16 steel, International Journal of Fatigue, vol.11, issue.3, pp.169-175, 1989.
DOI : 10.1016/0142-1123(89)90436-2

D. Hills, D. Nowell, O. Connor, and J. , On the mechanics of fretting fatigue, Wear, vol.125, issue.1-2, pp.129-56, 1988.
DOI : 10.1016/0043-1648(88)90198-6

D. A. Hills and D. Nowell, Mechanics of fretting-fatigue, 1994.

O. Jin and S. Mall, Effects of independent pad displacement on fretting fatigue behavior of Ti???6Al???4V, Wear, vol.253, issue.5-6, pp.585-596, 2002.
DOI : 10.1016/S0043-1648(02)00061-3

F. Kiddle, Fatigue endurance, crack sensitivity and nucleation characteristics in structural elements in four Al-Cu alloys, C.P, 1974.

J. J. Madge, S. B. Leen, and P. Shipway, The critical role of fretting wear in the analysis of fretting fatigue, Wear, vol.263, issue.1-6, pp.542-51, 2007.
DOI : 10.1016/j.wear.2006.11.021

J. J. Madge, S. B. Leen, and P. Shipway, A combined wear and crack nucleation???propagation methodology for fretting fatigue prediction, International Journal of Fatigue, vol.30, issue.9, 2008.
DOI : 10.1016/j.ijfatigue.2008.01.002

M. Makonnen, Statistical size effect in the fatigue limit of steel, International Journal of Fatigue, vol.23, issue.5, pp.395-402, 2001.
DOI : 10.1016/S0142-1123(01)00003-2

M. Makonnen, Notch size effects in the fatigue limit of steel, International Journal of Fatigue, vol.25, issue.1, pp.17-26, 2003.
DOI : 10.1016/S0142-1123(02)00053-1

J. F. Matlik, T. N. Farris, F. K. Haake, G. R. Swanson, and G. Duke, High-frequency, high-temperature fretting-fatigue experiments, Wear, vol.261, issue.11-12, pp.1367-1382, 2006.
DOI : 10.1016/j.wear.2006.03.048

J. Mcdowell, Fretting corrosion tendencies of several combinations of materials in Symposium on fretting corrosion, ASTM STP, vol.144, pp.24-39, 1953.

J. Meriaux, S. Fouvry, K. J. Kubiak, and S. Deyber, Characterization of crack nucleation in TA6V under fretting???fatigue loading using the potential drop technique, International Journal of Fatigue, vol.32, issue.10, pp.32-1658, 2010.
DOI : 10.1016/j.ijfatigue.2010.03.008

K. Miller, Materials science perspective of metal fatigue resistance, Materials Science and Technology, vol.187, issue.65, pp.453-62, 1993.
DOI : 10.1111/j.1460-2695.1992.tb01259.x

R. D. Mindlin and H. Deresiewicz, Elastic Spheres in Contact Under Varying Oblique Forces, Trans ASME Ser E, J Appl Mech, vol.20, pp.327-371, 1953.
DOI : 10.1007/978-1-4613-8865-4_35

F. Morel, T. Palin-luc, and C. Froustey, Comparative study and link between mesoscopic and energetic approaches in high cycle multiaxial fatigue, International Journal of Fatigue, vol.23, issue.4, pp.317-327, 2001.
DOI : 10.1016/S0142-1123(00)00100-6
URL : https://hal.archives-ouvertes.fr/hal-01372757

F. Morel and T. Palin-luc, A non-local theory applied to high cycle multiaxial fatigue, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.21, issue.7, pp.649-665, 2002.
DOI : 10.1016/0093-6413(91)90054-Z
URL : https://hal.archives-ouvertes.fr/hal-01376167

F. Morel and N. Huyen, Plasticity and damage heterogeneity in fatigue, Theoretical and applied fracture mechanics 49, pp.98-127, 2008.

F. Morel, A. Morel, and Y. Nadot, Comparison between defects and micro-notches in multiaxial fatigue ??? The size effect and the gradient effect, International Journal of Fatigue, vol.31, issue.2, pp.263-275, 2009.
DOI : 10.1016/j.ijfatigue.2008.09.005
URL : https://hal.archives-ouvertes.fr/hal-00809338

A. Mugadu, D. Hills, and D. Nowell, Modifications to a fretting-fatigue testing apparatus based upon an analysis of contact stresses at complete and nearly complete contacts, Wear, vol.252, issue.5-6, pp.475-83, 2002.
DOI : 10.1016/S0043-1648(02)00007-8

Y. Nadot and T. Billaudeau, Multiaxial fatigue limit criterion for defective materials, Engineering fracture mechanics, pp.112-133, 2006.
DOI : 10.1016/j.engfracmech.2005.06.005

C. Navarro, S. Munoz, and J. Dominguez, On the use of multiaxial fatigue criteria for fretting fatigue life assessment, International Journal of Fatigue, vol.30, issue.1, pp.32-44, 2008.
DOI : 10.1016/j.ijfatigue.2007.02.018

I. Nedbal, J. Siegl, and J. Kunz, Advances in Fracture Research, pp.3483-3491, 1989.

H. Neuber, Theory of notch stresses: principles for exact calculation of strength with reference to structural form and material, 1958.

D. Nowell, An analysis of fretting fatigue, 1973.

D. Nowell and D. Hills, Contact problems incorporating elastic layers, International Journal of Solids and Structures, vol.24, issue.1, pp.105-115, 1988.
DOI : 10.1016/0020-7683(88)90102-3

D. Nowell and D. Dini, Stress gradient effects in fretting fatigue, Tribology International, vol.36, issue.2, pp.36-71, 2003.
DOI : 10.1016/S0301-679X(02)00134-2

D. Nowell, D. Dini, and D. Hills, Recent developments in the understanding of fretting fatigue, Engineering Fracture Mechanics, vol.73, issue.2, pp.207-222, 2006.
DOI : 10.1016/j.engfracmech.2005.01.013

T. Palin-luc and S. Lasserre, An energy based criterion for high cycle multiaxial fatigue, European Journal of Mechanics - A/Solids, vol.17, issue.2, pp.237-251, 1998.
DOI : 10.1016/S0997-7538(98)80084-3
URL : https://hal.archives-ouvertes.fr/hal-01376427

T. Palin-luc, S. Lasserre, and J. Bérard, EXPERIMENTAL INVESTIGATION ON THE SIGNIFICANCE OF THE CONVENTIONAL ENDURANCE LIMIT OF A SPHEROIDAL GRAPHITE CAST IRON, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.21, issue.2, pp.192-200, 1998.
DOI : 10.1046/j.1460-2695.1998.00409.x
URL : https://hal.archives-ouvertes.fr/hal-01375929

T. Palin-luc, Approche énergétique et volumique de la fatigue multiaxiale des métaux, 2004.

I. Papadopoulos, Fatigue Polycyclique des métaux: une nouvelle approche, 1987.

I. Papadopoulos, A new criterion of fatigue strength for out-of-phase bending and torsion of hard metals, International Journal of Fatigue, vol.16, issue.6, pp.377-384, 1994.
DOI : 10.1016/0142-1123(94)90449-9

I. Papadopoulos, A HIGH-CYCLE FATIGUE CRITERION APPLIED IN BIAXIAL AND TRIAXIAL OUT-OF-PHASE STRESS CONDITIONS, Fatigue & Fracture of Engineering Materials and Structures, vol.41, issue.1, pp.79-91, 1995.
DOI : 10.1016/0142-1123(89)90436-2

I. V. Papadopoulos and V. Panoskaltsis, Invariant formulation of a gradient dependant multiaxial high-cycle fatigue criterion, pp.513-528, 1996.

I. V. Papadopoulos, P. Davoli, C. Gorla, M. Filippini, and A. Bernasconi, A comparative study of multiaxial high-cycle fatigue criteria for metals, International Journal of Fatigue, vol.19, issue.3, pp.219-235, 1997.
DOI : 10.1016/S0142-1123(96)00064-3

I. Papadopoulos, Long life fatigue under multiaxial loading, International Journal of Fatigue, vol.23, issue.10, pp.839-849, 2001.
DOI : 10.1016/S0142-1123(01)00059-7
URL : http://publications.jrc.ec.europa.eu/repository/handle/JRC22174

H. Proudhon, S. Fouvry, and G. Yantio, Determination and prediction of the fretting crack initiation: introduction of the (P, Q, N) representation and definition of a variable process volume, International Journal of Fatigue, vol.28, issue.7, pp.707-713, 2006.
DOI : 10.1016/j.ijfatigue.2005.09.005
URL : https://hal.archives-ouvertes.fr/hal-00333260

H. Proudhon, S. Fouvry, and J. Buffière, A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume, International Journal of Fatigue, vol.27, issue.5, pp.569-579, 2005.
DOI : 10.1016/j.ijfatigue.2004.09.001
URL : https://hal.archives-ouvertes.fr/hal-00436855

G. Qylafku, Z. Azari, N. Kadi, M. Gjonaj, and G. Pluvinage, Application of a new model proposal for fatigue life prediction on notches and key-seats, International Journal of Fatigue, vol.21, issue.8, pp.753-60, 1999.
DOI : 10.1016/S0142-1123(99)00046-8

F. Sansoz, Propagation des petites fissures de fatigue dans les zones de concentration de contraintes dans le superalliage N18, Thèse de doctorat, 2000.
DOI : 10.1051/jp4:2000432
URL : https://hal.archives-ouvertes.fr/pastel-00000970

C. Schwob, Approche non locale probabiliste pour l'analyse en fatigue des zones à gradients de contraintes, Thèse de doctorat, pp.978-613, 2007.

C. Schwob, L. Chambon, and F. Ronde-oustau, Evaluation probabiliste de la durée de vie de structures, 2007.

A. Simbürger and . Festigkeitsverhalten-zäher, Werkstoffe bei einer mehrachsigen, phasenverschobenen Schwingbeanspruchung mit körperfesten und veränderlichen Hauptspannungsrichtungen, LVF, Bericht Nr. FB-121, 1975.

L. Susmel, The theory of critical distances: a review of its applications in fatigue, Engineering Fracture Mechanics, vol.75, issue.7, pp.75-1706, 2008.
DOI : 10.1016/j.engfracmech.2006.12.004

M. Szolwinski and T. Farris, Mechanics of fretting fatigue crack formation, Wear, vol.198, issue.1-2, pp.93-107, 1996.
DOI : 10.1016/0043-1648(96)06937-2

M. Szolwinski, J. Matlik, and T. Farris, Effects of HCF loading on fretting fatigue crack nucleation, International Journal of Fatigue, vol.21, issue.7, pp.671-677, 1999.
DOI : 10.1016/S0142-1123(99)00028-6

D. Taylor, The theory of critical distances, Engineering Fracture Mechanics, vol.75, 2008.

C. Vallellano, A. Navarro, and J. Dominguez, Fatigue crack growth threshold conditions at notches. Part I: theory, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.9, issue.2, pp.113-121
DOI : 10.1016/0013-7944(79)90081-X

C. Vallellano, A. Navarro, and J. Dominguez, Fatigue crack growth threshold conditions at notches. Part II: generalization and application to experimental results, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.3, issue.2, pp.123-128
DOI : 10.1016/0022-5096(57)90004-2

L. Vincent, Y. Berthier, and M. Godet, Testing methods in fretting fatige: a critical appraisal, pp.33-48, 1992.

O. Vingsbo and M. Soderberg, On fretting maps, Wear, vol.126, issue.2, pp.126-131, 1988.
DOI : 10.1016/0043-1648(88)90134-2

J. Vogwell and J. Minguez, Failure in lug joints and plates with holes, Engineering failure analysis, pp.129-135, 1995.

D. Waryoba and J. Mshana, Effect of size and stress gradient on fatigue behaviour, International Journal of Pressure Vessels and Piping, vol.60, issue.2, pp.177-182, 1994.
DOI : 10.1016/0308-0161(94)90024-8

B. Weber, Fatigue multiaxiale des structures industrielles sous chargements quelconques, Thèse de doctorat, 1999.

M. H. Zhu, Z. R. Zhou, K. Ph, and L. Vincent, Radial fretting fatigue damage of surface coatings, Wear, vol.250, issue.1-12, pp.650-657, 2001.
DOI : 10.1016/S0043-1648(01)00672-X