A. Amelinckx and W. Dekeyser, The structure and properties of grain boundaries ? Solid State Physics, pp.8-325, 1959.

J. Baczynski and J. J. Jonas, Texture development during the torsion testing of ?-iron and two IF steels ? Acta Materialia, pp.44-55, 1996.

J. Baczynski, I. Deardo, and J. J. Jonas, Dynamic recrystallization textures in ferrite and ferritic stainless steels ? Materials Science Forum, pp.273-275, 1998.
DOI : 10.4028/www.scientific.net/msf.273-275.465

Z. S. Basinski, Thermally activated glide in fcc metals and its application to the theory of strain hardening ? Philosophical Magazine, pp.4-40, 1959.

A. J. Bradley and A. H. Jay, The Formation of Superlattices in Alloys of Iron and Aluminium, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.136, issue.829, pp.136-829, 1932.
DOI : 10.1098/rspa.1932.0075

U. Brux, G. Frommeyer, and J. Jimenez, Light-weight steels based on iron-aluminium - influence of micro alloying elements (B, Ti, Nb) on microstructures, textures and mechanical properties, Steel Research, vol.3, issue.11, pp.73-85, 2002.
DOI : 10.1002/srin.200200026

R. A. Buckley and S. Kaviani, Some aspects of rapid solidification processing of Fe-Al-X alloys ? Materials Science and Engineering A ?, pp.258-259, 1998.

F. R. Castro-fernandez and C. M. Sellars, Relationship between room-temperature proof stress, dislocation density and subgrain size ? Philosophical Magazine A, pp.60-64, 1989.

C. Y. Chao, C. N. Hwang, and T. F. Liu, Grain boundary precipitation behaviors in an Fe-9.8Al-28.6Mn-0.8Si-1.0C alloy, Scripta Materialia, vol.34, issue.1, pp.0-34, 1996.
DOI : 10.1016/1359-6462(95)00485-8

C. Y. Chao and C. H. Liu, Effects of Mn contents on the microstructure and mechanical properties of the, 2002.

W. C. Cheng and H. Y. Lin, The precipitation of fcc phase from bcc matrix in an Fe-Mn-Al alloy ? Materials Science and Engineering A, pp.323-324, 2002.

W. K. Choo, J. H. Kim, and J. C. Yoon, Microstructural change in austenitic Fe-30.0wt%Mn-7.8wt%Al-1.3wt%C initiated by spinodal decomposition and its influence on mechanical properties, Acta Materialia, vol.45, issue.12, pp.45-57, 1997.
DOI : 10.1016/S1359-6454(97)00201-2

C. Chovet, S. Gourdet, and F. Montheillet, Modelling the transition from discontinuous to continuous dynamic recrystallization with decreasing purity in aluminium ? Materials Transactions, pp.41-42, 2000.

C. Chovet-sauvage, Evolution des microstructures et des textures en grande déformation à chaud d'un alliage, 2000.

J. P. Chu, J. H. Wu, H. Y. Yasuda, Y. Umakoshi, and K. Inoue, Electron backscattered diffraction study on superplastic properties of coarse-grained Fe-27 at% Al, Intermetallics, vol.8, issue.1, pp.27-35, 2000.
DOI : 10.1016/S0966-9795(99)00067-9

J. P. Chu, H. Y. Yasuda, Y. Umakoshi, and K. Inoue, Electron backscattered diffraction study on superplastic coarse-grained Fe-27at.%Al: processing effects, pp.8-9, 2000.

D. Connétable and P. Maugis, First principle calculations of the kappa-Fe 3, 2008.

D. Hoff, R. T. Rhines, and F. W. , Quantitative metallography ? Mc Graw-Hill Book, 1968.

J. H. Devan and P. F. Tortorelli, The oxidation-sulfidation behavior of iron alloys containing 16-40 at% aluminium ? Corrosion Science ?, pp.35-40, 1993.

B. Eghbali, A. Abdollah-zadeh, and P. D. Hodgson, Dynamic softening of ferrite during large strain warm deformation of a plain-carbon steel ? Materials Science and Engineering A, pp.462-463, 2007.

Y. Estrin and H. Mecking, A unified phenomenological description of work hardening and creep based on one-parameter models ? Acta Metallurgica, pp.32-33, 1984.

R. W. Evans and P. J. Scharning, Systematic errors in flow stress measurement for the hot plane strain compression test ? Materials Science and Technology, pp.20-24, 2004.

L. Falat, G. Sauthoff, and G. Frommeyer, Mechanical properties of Fe???Al???M???C (M=Ti, V, Nb, Ta) alloys with strengthening carbides and Laves phase, Intermetallics, vol.13, issue.12, pp.13-25, 2005.
DOI : 10.1016/j.intermet.2004.05.010

D. F. Fields and W. A. Backofen, Determination of strain-hardening characteristics by torsion testing, Proceedings of the 60 th Annual Meeting of the American Society for Testing and Materials, pp.57-1259, 1957.

G. Frommeyer, E. J. Drewes, and B. Engl, Physical and mechanical properties of iron-aluminium-(Mn, Si) lightweight steels ? La Revue de Métallurgie, pp.97-107, 2000.

H. J. Frost and M. F. Ashby, Deformation mechanism maps, the plasticity and creep of metals and ceramics Garat X. (2010) Rapport interne ArcelorMittal : New low density duplex grades, effects of the chemical compositions and hot rolling conditions, 1982.

B. Gaudout, Modélisation des évolutions microstructurales et étude de la lubrification par film solide lors du filage à chaud d, 2009.

G. Glover and C. M. Sellars, Recovery and recrystallization during high temperature deformation of ?-iron ? Metallurgical Transactions, pp.4-765, 1973.

O. Grassel, L. Kruger, G. Frommeyer, and L. W. Meyer, High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development -properties -application ? International Journal of Plasticity, pp.16-26, 2000.

K. H. Han, The microstructures and mechanical properties of an austenitic Nb-bearing Fe-Mn-Al-C alloy processed by controlled rolling ? Materials Science and Engineering A, pp.279-280, 2000.

J. Herrmann, G. Inden, and G. Sauthoff, Deformation behaviour of iron-rich iron-aluminium alloys at low temperatures, pp.51-61, 2003.

J. S. Hinton and J. H. Beynon, Restoration Processes during Hot Deformation in the ??-ferrite and Austenite Dual Phase Region of AISI430 Ferritic Stainless Steel, ISIJ International, vol.47, issue.10, pp.47-57, 2007.
DOI : 10.2355/isijinternational.47.1465

C. Hocquard, Industrie automobile : allégements versus dérive pondérale http://www.dgemp.minefi.gouv.fr/energie/matieres/textes/ecomine_note_sept05 Dislocation cell formation in metals, htm Holt D.L. Journal of Applied Physics, pp.41-49, 1970.

M. Huh and O. Engler, Effect of intermediate annealing on texture, formability and ridging of 17%Cr ferritic stainless steel sheet ? Materials Science and Engineering A, pp.308-309, 2001.

F. J. Humphreys, Review, Journal of the Royal Musical Association, vol.122, issue.1, pp.36-52, 2001.
DOI : 10.1093/jrma/122.1.127

F. J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena (Second Edition) ? Chapter 14 ? Continuous Recrystallization During and after Large Strain Deformation, pp.451-467, 2004.
DOI : 10.1016/b978-008044164-1/50018-9

F. J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena (Second Edition) ? Chapter, pp.67-89, 2004.

W. B. Hutchinson, Recrystallisation textures in iron resulting from nucleation at grain boundaries ? Acta Metallurgica ?, pp.37-41, 1989.

K. H. Hwang, C. M. Wan, and J. G. Byrne, Phase transformation in a duplex Fe-Mn-Al-C alloy ? Materials Science and Engineering A ? 132, pp.161-169, 1991.

C. N. Hwang and T. F. Liu, The as-quenched microstructures of Fe-9Al-30Mn-1.2C-xSi alloys, Scripta Materialia, vol.36, issue.8, pp.36-44, 1997.
DOI : 10.1016/S1359-6462(96)00468-X

O. Ikeda, I. Ohnuma, R. Kainuma, and K. Ishida, Phase equilibria and stability of ordered BCC phases in the Fe-rich portion of the Fe???Al system, Intermetallics, vol.9, issue.9, pp.9-9, 2001.
DOI : 10.1016/S0966-9795(01)00058-9

K. Ishida, H. Ohtani, N. Satoh, R. Kainuma, and T. Nishizawa, Phase equilibria in Fe-Mn-Al-C alloys., ISIJ International, vol.30, issue.8, pp.30-38, 1990.
DOI : 10.2355/isijinternational.30.680

J. H. Kang and S. Torizuka, Dynamic recrystallization by large strain deformation with a high strain rate in an ultralow carbon steel, Scripta Materialia, vol.57, issue.11, pp.57-1048, 2007.
DOI : 10.1016/j.scriptamat.2007.07.039

Y. G. Kim, J. M. Han, and J. S. Lee, Composition and temperature dependence of tensile properties of austenitic Fe-Mn-Al-C alloys ? Materials Science and Engineering A ?, pp.114-51, 1989.

Y. Kimura, K. Handa, K. Hayashi, and Y. Mishima, Microstructure control and ductility improvement of the two-phase ?-Fe/?-(Fe, Mn) 3 AlC alloys in the Fe-Mn-Al-C quaternary system, pp.12-18, 2004.

S. Kobayashi, S. Zaefferer, A. Schneider, D. Raabe, and G. Frommeyer, Slip system determination by rolling texture measurements around the strength peak temperature in a Fe 3 Al-based alloy ? Materials Science and Engineering A ?, pp.387-389, 2004.

S. Kobayashi and T. Takasugi, Grain refinement of a Fe 3 Al-based alloy using ?-Fe 3 AlC precipitate particles stimulating nucleation of recrystallization, pp.15-27, 2007.

A. Laasraoui and J. J. Jonas, Prediction of steel flow stresses at high temperatures and strain rates ? Metallurgical Transactions A, pp.22-29, 1991.

M. C. Li, H. Chang, P. W. Kao, and D. Gan, The effect of Mn and Al contents on the solvus of ? phase in austenitic Fe-Mn-Al-C alloys ? Materials Chemistry and Physics, pp.59-60, 1999.

D. Lin, T. L. Lin, A. Shan, and M. Chen, Superplasticity in large-grained Fe 3 Al alloys, pp.4-6, 1996.

D. Lin and Y. Liu, Microstructural evolution and mechanisms of superplasticity in large-grained iron aluminides ? Materials Science and Engineering A ?, pp.268-269, 1999.

D. Lin and Y. Liu, An electron back-scattered diffraction study on the microstructural evolution in large-grained iron aluminides during superplastic deformation ? Materials Science and Engineering A, pp.329-331, 2002.

S. M. Lim, Caractérisation et modélisation des microstructures et des textures d'alliages ferritiques en grande déformation : genèse d'alliages à grains ultrafins, 2008.

X. J. Liu, S. M. Hao, L. Y. Xu, Y. F. Guo, and H. Chen, Experimental study of the phase equilibria in the Fe-Mn-Al system ? Metallurgical and Materials Transactions A ?, pp.27-36, 1996.

R. Lyszkowski and J. Bystrzycki, Hot deformation and processing maps of a Fe???Al intermetallic alloy, Materials Characterization, vol.96, pp.14-24, 2006.
DOI : 10.1016/j.matchar.2014.07.004

H. J. Mcqueen and N. D. Ryan, Constitutive analysis in hot working, Materials Science and Engineering: A, vol.322, issue.1-2, pp.322-323, 2002.
DOI : 10.1016/S0921-5093(01)01117-0

F. Montheillet, Moving grain boundaries during hot deformation of metals : Dynamic Recrystallization ? Moving Interfaces in Solids ? CISM Courses and lectures ? N o 453, pp.203-256, 2004.

A. Morita, Aluminium alloys for automobile applications ? Proc. Of ICAA-6, pp.1-25, 1998.

D. G. Morris, D. Peguiron, M. Nazmy, and C. Noseda, Microstructure and mechanical properties of an Fe-Al alloy of low aluminium content ? Materials Science and Engineering A, pp.191-192, 1995.

D. G. Morris and M. A. Morris-munoz, The influence of microstructure on the ductility of iron aluminides, Intermetallics, vol.7, issue.10, pp.7-10, 1999.
DOI : 10.1016/S0966-9795(99)00038-2

J. L. Murray, Binary alloy phase diagrams ?, 1986.

S. V. Murty, S. Torizuka, and K. Nagai, a) Microstructural evolution during simple heavy warm compression of a low carbon steel : Development of a processing map ? Materials Science and Engineering A ? 410, pp.319-323, 2005.

S. V. Murty, S. Torizuka, K. Nagai, T. Kitai, and Y. Kogo, Grain boundary diffusion controlled ultrafine grain formation during large strain-high Z deformation of coarse (200µm) grained ultra-low carbon steel ? Materials Science and Engineering A, pp.457-458, 2007.

M. K. Nave and M. R. Barnett, Fragmentation of Orientation within Grains of a Cold-rolled Interstitial-free Steel, ISIJ International, vol.44, issue.1, pp.44-45, 2004.
DOI : 10.2355/isijinternational.44.187

M. Palm and G. Inden, Experimental determination of phase equilibria in the Fe???Al???C system, Intermetallics, vol.3, issue.6, pp.3-6, 1995.
DOI : 10.1016/0966-9795(95)00003-H

M. Palm, Concepts derived from phase diagram studies for the strengthening of Fe???Al-based alloys, Intermetallics, vol.13, issue.12, pp.13-25, 2005.
DOI : 10.1016/j.intermet.2004.10.015

J. L. Pouchou, Introduction à l'analyse EBSD : principes généraux et mise en oeuvre dans le MEB ? L'analyse EBSD : principes et applications, pp.1-24, 2004.

D. Raabe, G. Schlenkert, and K. Lücke, Texture and microstructure of rolled and annealed tantalum ? Materials Science and Technology, pp.10-14, 1994.

D. Raabe, Investigation of the orientation dependence of recovery in low-carbon steel by use of single orientation determination, Steel Research, vol.62, issue.162, pp.66-71, 1995.
DOI : 10.1002/srin.199501116

D. Raabe, Z. Zhao, S. Park, and F. Roters, Theory of orientation gradients in plastically strained crystals, Acta Materialia, vol.50, issue.2, pp.50-52, 2002.
DOI : 10.1016/S1359-6454(01)00323-8

L. Microscopie-electronique-À-balayage, ?. Samajdar, I. Verlinden, B. Van-houtte, P. Vanderschueren et al., Recrystallisation kinetics in IF-steels: a study on the sluggish recrystallisation behaviour, pp.37-43, 1997.

I. Samajdar, B. Verlinden, and P. Van-houtte, Development of recrystallization texture in IF-steel: an effort to explain developments in global texture from microtextural studies, Acta Materialia, vol.46, issue.8, pp.46-54, 1998.
DOI : 10.1016/S1359-6454(97)00466-7

I. Samajdar, B. Verlinden, L. Kestens, and P. Van-houtte, Physical parameters related to the developments of recrystallization textures in an ultra low carbon steel, Acta Materialia, vol.47, issue.1, pp.47-48, 1999.
DOI : 10.1016/S1359-6454(98)00337-1

R. Sandström and R. Lagneborg, A model for hot working occurring by recrystallization ? Acta Metallurgica ?, pp.23-26, 1975.

A. Seeger, Lattice vacancies in high purity ?-iron ? Physica Status Solidi ?, pp.167-289, 1998.

T. Senuma and K. Kawasaki, Texture Formation in Ti-bearing IF Steel Sheets throughout the Rolling and Annealing Processes in Terms of the Influence of Hot Rolling Conditions on Deep Drawability., ISIJ International, vol.34, issue.1, pp.34-35, 1994.
DOI : 10.2355/isijinternational.34.51

H. J. Shin, J. K. An, S. H. Park, and D. N. Lee, The effect of texture on ridging of ferritic stainless steel, Acta Materialia, vol.51, issue.16, pp.51-67, 2003.
DOI : 10.1016/S1359-6454(03)00187-3

F. Stein and M. Palm, Re-determination of transition temperatures in the Fe???Al system by differential thermal analysis, International Journal of Materials Research, vol.98, issue.7, pp.98-580, 2007.
DOI : 10.3139/146.101512

N. S. Stoloff, IRON ALUMINIDES, pp.258-259, 1998.
DOI : 10.1142/9789812793959_0003

P. R. Swann, W. R. Duff, and R. M. Fisher, The diagram of state for iron-aluminium solid solutions ? Transactions of the Metallurgical Society of, pp.245-851, 1969.

K. Tanaka, M. Otsuka, and H. Yamagata, Effect of orientation and purity on the dynamic recrystallization of aluminium single crystals with multi glide systems, Materials Transactions JIM ?, pp.40-43, 1999.

N. Tsuji, Y. Matsubara, and Y. Saito, Dynamic recrystallization of ferrite in interstitial free steel ? Scripta Materialia ?, pp.37-41, 1997.

R. Umino, X. J. Liu, Y. Sutou, C. P. Wang, R. Ohnuma et al., Experimental determination and thermodynamic calculation of phase equilibria in the Fe???Mn???Al system, Journal of Phase Equilibria and Diffusion, vol.9, issue.1, pp.27-28, 2006.
DOI : 10.1361/105497106X92817

K. Vedula, FeAl and Fe 3 Al ? Intermetallics Compounds, auteurs, pp.199-209, 1994.

C. S. Wang, C. N. Hwang, C. G. Chao, and T. F. Liu, Phase transitions in an Fe-9Al-30Mn-2, pp.0-57, 2007.

W. S. Yang, K. H. Hwang, and T. B. Wu, Carbon-induced nucleation (CIN) mechanism of the needle-like phase in duplex Fe-Mn-Al-C alloys, Scripta Metallurgica et Materialia, vol.24, issue.7, pp.24-31, 1990.
DOI : 10.1016/0956-716X(90)90331-A

I. Zuazo, Microstructural evolution in Fe-Al-Mn-C lightweight alloys (thèse) ? INP Grenoble, 2009.