. Chap, 4 -Optimal design of an insulation sandwich panel (a) Design Standard. (b) Design ?5. (c) Design ?6

A. and F. Jouve, Minimum stress optimal design with the level set method. Engineering Analysis with Boundary Elements, pp.909-918, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01089075

A. and O. Pantz, Structural optimization with FreeFem++. Structural and Multidisciplinary Optimization, pp.173-181, 0119.
URL : https://hal.archives-ouvertes.fr/hal-01089081

F. Allaire, A. Jouve, and . Toader, Structural optimization using sensitivity analysis and a level-set method, Journal of Computational Physics, vol.194, issue.1, pp.363-393, 2004.
DOI : 10.1016/j.jcp.2003.09.032

H. G. Allen, Analysis and Design of Structural Sandwich Panels, p.53, 1969.

H. G. Allen, Analysis of sandwich panels: the significance of shear deformation, Composites, vol.1, issue.4, pp.215-220, 1970.
DOI : 10.1016/0010-4361(70)90006-6

A. A. Amstutz and . Novotny, Topological optimization of structures subject to Von Mises stress constraints . Structural and Multidisciplinary Optimization, pp.407-420, 2009.

A. Andreassen, M. Clausen, B. Schevenels, O. Lazarov, and . Sigmund, Efficient topology optimization in MATLAB using 88 lines of code. Structural and Multidisciplinary Optimization, pp.1-16, 2010.

J. Ansola, J. Canales, J. Tarrago, and . Rasmussen, An integrated approach for shape and topology optimization of shell structures, Computers & Structures, vol.80, issue.5-6, pp.5-6449, 2002.
DOI : 10.1016/S0045-7949(02)00019-6

M. F. Ashby, Multi-objective optimization in material design and selection, Acta Materialia, vol.48, issue.1, pp.359-369, 2000.
DOI : 10.1016/S1359-6454(99)00304-3

M. F. Ashby, Materials selection in mechanical design, Le Journal de Physique IV, vol.03, issue.C7, pp.47-51, 2005.
DOI : 10.1051/jp4:1993701
URL : https://hal.archives-ouvertes.fr/jpa-00251707

M. F. Ashby, Hybrid Materials to Expand the Boundaries of Material-Property Space, Journal of the American Ceramic Society, vol.8, issue.[5], pp.3-14, 2011.
DOI : 10.1111/j.1551-2916.2011.04559.x

M. F. Ashby and Y. Bréchet, Designing hybrid materials, Acta Materialia, vol.51, issue.19, pp.5801-5821, 2003.
DOI : 10.1016/S1359-6454(03)00441-5

A. Standard and C. , Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure, p.68, 2006.

A. Standard and D. , Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness, p.68, 2006.

A. Standard and F. , Standard Specification for Additive Manufacturing File Format (AMF), p.141, 2011.

R. Z. Awad, T. Aravinthan, Y. Zhuge, and F. Gonzalez, A review of optimization techniques used in the design of fibre composite structures for civil engineering applications, Materials & Design, vol.33, 0117.
DOI : 10.1016/j.matdes.2011.04.061

J. Barthold and E. Stein, A continuum mechanical-based formulation of the variational sensitivity analysis in structural optimization. Part I: analysis, Structural Optimization, vol.28, issue.1-2, pp.29-42, 1996.
DOI : 10.1007/BF01279652

M. P. Bendsøe, Optimization of structural topology, shape, and material, 1995.
DOI : 10.1007/978-3-662-03115-5

M. P. Bendsøe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Computer Methods in Applied Mechanics and Engineering, vol.71, issue.2, pp.197-224, 1988.
DOI : 10.1016/0045-7825(88)90086-2

M. P. Bendsøe and O. Sigmund, Material interpolation schemes in topology optimization, Archive of Applied Mechanics (Ingenieur Archiv), vol.69, issue.9-10, pp.635-654, 1999.
DOI : 10.1007/s004190050248

M. P. Bendsøe and O. Sigmund, Topology optimization: theory, methods, and applications. Engineering online library, 2003.

M. P. Bendsøe, J. M. Guedes, S. Plaxton, and J. E. Taylor, Optimization of structure and material properties for solids composed of softening material, International Journal of Solids and Structures, vol.33, issue.12, pp.1799-1813, 1996.
DOI : 10.1016/0020-7683(95)00121-2

M. Bornert, T. Bretheau, and P. Gilormini, Homogénéisation en mécanique des matériaux 1 -Matériaux aléatoiresaléatoiresélastiques et milieux périodiques, 2001.

O. Bouaziz, Y. Bréchet, and J. D. Embury, Heterogeneous and Architectured Materials: A Possible Strategy for Design of Structural Materials, Advanced Engineering Materials, vol.4, issue.19, pp.24-36, 2008.
DOI : 10.1002/adem.200700289
URL : https://hal.archives-ouvertes.fr/hal-00358408

. Bourgeois, Modélisation numérique des panneaux structuraux légers, p.80, 1997.

P. Bourgeois, O. Cartraud, and . Débordes, Homogenization of Periodic Sandwiches, p.80, 1997.
DOI : 10.1007/978-94-015-9091-4_15

N. Buannic and P. Cartraud, Higher-order effective modeling of periodic heterogeneous beams. I. Asymptotic expansion method, International Journal of Solids and Structures, vol.38, issue.40-41, pp.40-417139, 2001.
DOI : 10.1016/S0020-7683(00)00422-4

P. Buannic, T. Cartraud, and . Quesnel, Homogenization of corrugated core sandwich panels, Composite Structures, vol.59, issue.3, pp.299-312, 1979.
DOI : 10.1016/S0263-8223(02)00246-5

. Caillerie, Thin elastic and periodic plates, Mathematical Methods in the Applied Sciences, vol.2, issue.18, pp.159-191, 1984.
DOI : 10.1002/mma.1670060112

L. Carlsson, P. Bourban, and J. Mercier, de Traité des Matériaux Matériaux compositesà composites`compositesà matrice organique: constituants, procédés, propriétés. PPUR presses polytechniques, 2004.

E. Carrera, Theories and finite elements for multilayered, anisotropic, composite plates and shells, Archives of Computational Methods in Engineering, vol.35, issue.6, pp.87-140, 2002.
DOI : 10.1007/BF02736649

. Carrera, Historical review of Zig-Zag theories for multilayered plates and shells, Applied Mechanics Reviews, vol.56, issue.3, pp.287-308, 2003.
DOI : 10.1115/1.1557614

J. Céa, The shape and topological optimizations connection, Computer Methods in Applied Mechanics and Engineering, vol.188, issue.4, pp.713-726, 0199.
DOI : 10.1016/S0045-7825(99)00357-6

A. Cecchi and K. Sab, A homogenized Reissner???Mindlin model for orthotropic periodic plates: Application to brickwork panels, International Journal of Solids and Structures, vol.44, issue.18-19, pp.18-196055, 2007.
DOI : 10.1016/j.ijsolstr.2007.02.009

S. Chen, Q. Zhou, and . Li, Multiobjective topology optimization for finite periodic structures, Computers & Structures, vol.88, issue.11-12, pp.806-811, 2010.
DOI : 10.1016/j.compstruc.2009.10.003

S. Cho and H. Jung, Design sensitivity analysis and topology optimization of displacement?loaded nonlinear structures, Computer Methods in Applied Mechanics and Engineering, vol.192, pp.22-242539, 0201.

C. Davis, S. W. Diegel, and R. G. Boundy, Transportation Energy Data Book: Edition 29, U.S. Department of Energy, issue.11, p.36, 2010.
DOI : 10.2172/983839
URL : http://www.osti.gov/scitech/servlets/purl/1224755

D. Luycker, F. Morestin, P. Boisse, and D. Marsal, Simulation of 3D interlock composite preforming, Composite Structures, vol.88, issue.4, pp.615-623, 1950.
DOI : 10.1016/j.compstruct.2008.06.005
URL : https://hal.archives-ouvertes.fr/hal-00391623

J. Despois, A. Marmottant, L. Salvo, and A. Mortensen, Influence of the infiltration pressure on the structure and properties of replicated aluminium foams, Materials Science and Engineering: A, vol.462, issue.1-2, pp.68-75, 2007.
DOI : 10.1016/j.msea.2006.03.157
URL : https://hal.archives-ouvertes.fr/hal-00197091

. Dewhurst, Analytical solutions and numerical procedures for minimum-weight Michell structures, Journal of the Mechanics and Physics of Solids, vol.49, issue.3, pp.445-467, 2001.
DOI : 10.1016/S0022-5096(00)00053-3

J. W. Dunlop, R. Weinkamer, and P. Fratzl, Artful interfaces within biological materials, Materials Today, vol.14, issue.3, pp.70-78, 2011.
DOI : 10.1016/S1369-7021(11)70056-6
URL : http://doi.org/10.1016/s1369-7021(11)70056-6

H. Eschenauer and N. Olhoff, Topology optimization of continuum structures: A review, Applied Mechanics Reviews, vol.54, issue.4, pp.331-119, 2001.
DOI : 10.1115/1.1388075

A. Fleck, V. S. Deshpande, and M. F. Ashby, Micro-architectured materials: past, present and future, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.63, issue.2103, pp.4662495-2516, 2010.
DOI : 10.1098/rspa.2008.0328

M. Fuchs, The Aboudi micromechanical model for topology design of structures, Computers & Structures, vol.73, issue.1-5, pp.355-362, 1999.
DOI : 10.1016/S0045-7949(98)00260-0

P. Garcia-lopez, M. Sanchez-silva, A. L. Medaglia, and A. Chateauneuf, A hybrid topology optimization methodology combining simulated annealing and SIMP, Computers & Structures, vol.89, issue.15-16, pp.15-161512, 0201.
DOI : 10.1016/j.compstruc.2011.04.008

Y. Gasser, F. Brechet, and . Paun, Materials Design for Acoustic Liners: an Example of Tailored Multifunctional Materials, Advanced Engineering Materials, vol.6, issue.12, pp.97-102, 2004.
DOI : 10.1002/adem.200300545

M. Genet, M. Houmard, S. Eslava, E. Saiz, and A. P. Tomsia, A two-scale model of the mechanical behavior of bioceramic scaffolds made by robocasting: possibilities and limits, Acta Biomaterialia, p.202

A. Gersborg-hansen, M. P. Bendsøe, and O. Sigmund, Topology optimization of heat conduction problems using the finite volume method. Structural and Multidisciplinary Optimization, pp.251-259, 0120.

I. Gibson, D. W. Rosen, and B. Stucker, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, 2009.
DOI : 10.1007/978-1-4939-2113-3

C. Gonzalez and J. Llorca, Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling, Composites Science and Technology, vol.67, issue.13, pp.2795-2806, 2007.
DOI : 10.1016/j.compscitech.2007.02.001

P. Grootenhuis, The control of vibrations with viscoelastic materials, Journal of Sound and Vibration, vol.11, issue.4, pp.421-433, 1970.
DOI : 10.1016/S0022-460X(70)80004-9

A. Hanssen, Y. Girard, L. Olovsson, T. Berstad, and M. Langseth, A numerical model for bird strike of aluminium foam-based sandwich panels, International Journal of Impact Engineering, vol.32, issue.7, pp.1127-1144, 2006.
DOI : 10.1016/j.ijimpeng.2004.09.004

. Hassani, A review of homogenization and topology optimization I???homogenization theory for media with periodic structure, Computers & Structures, vol.69, issue.6, pp.707-717, 1998.
DOI : 10.1016/S0045-7949(98)00131-X

. Hassani, A review of homogenization and topology optimization III???topology optimization using optimality criteria, Computers & Structures, vol.69, issue.6, pp.739-756, 1998.
DOI : 10.1016/S0045-7949(98)00133-3

. Hassani, A review of homogenization and topology opimization II???analytical and numerical solution of homogenization equations, Computers & Structures, vol.69, issue.6, pp.719-738, 1998.
DOI : 10.1016/S0045-7949(98)00132-1

M. Hasse, A. Grenet, R. Bontemps, H. Dendievel, and . Sallée, Realization, test and modelling of honeycomb wallboards containing a Phase Change Material, Energy and Buildings, vol.43, issue.1, pp.232-238, 2010.
DOI : 10.1016/j.enbuild.2010.09.017
URL : https://hal.archives-ouvertes.fr/hal-00546170

J. Hollister, Porous scaffold design for tissue engineering, Nature Materials, vol.51, issue.7, pp.518-542, 2005.
DOI : 10.1097/00006123-200209000-00024

J. Hollister, R. D. Maddox, and J. M. Taboas, Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints, Biomaterials, vol.23, issue.20, pp.4095-103, 2002.
DOI : 10.1016/S0142-9612(02)00148-5

A. Huang, Y. Radman, and . Xie, Topological design of microstructures of cellular materials for maximum bulk or shear modulus, Computational Materials Science, vol.50, issue.6, pp.1861-1870, 2011.
DOI : 10.1016/j.commatsci.2011.01.030

I. Huynen, N. Quiévy, C. Bailly, P. Bollen, C. Detrembleur et al., Multifunctional hybrids for electromagnetic absorption, Acta Materialia, vol.59, issue.8, pp.593255-3266, 1948.
DOI : 10.1016/j.actamat.2011.01.065

F. Incropera, . Dewitt, and L. Bergman, Transient conduction, Fundamentals of Heat and Mass Transfer, pp.255-346, 2007.

T. R. Jackson, H. Liu, N. M. Patrikalakis, E. M. Sachs, and M. J. Cima, Modeling and designing functionally graded material components for fabrication with local composition control, Materials & Design, vol.20, issue.2-3, pp.63-75, 0201.
DOI : 10.1016/S0261-3069(99)00011-4

C. Jauffrès, M. Yacou, R. Verdier, A. Dendievel, and . Ayral, Mechanical properties of hierarchical porous silica thin films: Experimental characterization by nanoindentation and Finite Element modeling, Microporous and Mesoporous Materials, vol.140, issue.1-3, pp.120-129, 2011.
DOI : 10.1016/j.micromeso.2010.09.004

A. Jibawy, B. Desmorat, and A. Vincenti, Optimisation structurale de coques minces composites stratifiées, 10ème Colloque National en Calcul des Structures, p.118, 2011.

R. Kicinger, T. Arciszewski, and K. Jong, Evolutionary computation and structural design: A survey of the state-of-the-art, Computers & Structures, vol.83, issue.23-24, pp.23-241943, 2005.
DOI : 10.1016/j.compstruc.2005.03.002

. Lebée, Thick periodic plates homogenization, application to sandwich panels including chevron folded core, p.83, 2010.

. Lhuissier, Random hollow spheres stackings: structure, behavior and integration into sandwich structures, p.179, 2009.

K. Li, N. Saitou, and . Kikuchi, Topology optimization of thermally actuated compliant mechanisms considering time-transient effect. Finite Elements in Analysis and Design, pp.1317-1331, 0201.

Z. Liu and J. G. Korvink, Structural Shape Optimization Using Moving Mesh Method, Comsol Users Conference, p.119, 2007.

. Lund, Buckling topology optimization of laminated multi-material composite shell structures, Composite Structures, vol.91, issue.2, pp.158-167, 0118.
DOI : 10.1016/j.compstruct.2009.04.046

Z. Ma, N. Kikuchi, and H. Cheng, Topological design for vibrating structures, Computer Methods in Applied Mechanics and Engineering, vol.121, issue.1-4, pp.259-280, 1995.
DOI : 10.1016/0045-7825(94)00714-X

. Mackerle, Topology and shape optimization of structures using FEM and BEM A bibliography Finite Elements in Analysis and Design, pp.243-253, 1999.

P. Martínez, O. M. Martí, and . Querin, Growth method for size, topology, and geometry optimization of truss structures. Structural and Multidisciplinary Optimization, pp.13-26, 2006.

J. Michel, H. Moulinec, and P. Suquet, Effective properties of composite materials with periodic microstructure: a computational approach, Computer Methods in Applied Mechanics and Engineering, vol.172, issue.1-4, pp.109-143, 1999.
DOI : 10.1016/S0045-7825(98)00227-8

F. Mirtsch, N. Weinert, M. Pech, and G. Seliger, Vault Structures Enabling Sustainable Products, 13th International Conference on Life Cycle Engineering, pp.629-634, 2006.

G. Munoz, M. P. Allaire, and . Bendsøe, On two formulations of an optimal insulation problem. Structural and Multidisciplinary Optimization, pp.363-373, 2007.

N. Silva, J. O. Fonseca, and N. Kikuchi, Optimal design of periodic piezocomposites, Computer Methods in Applied Mechanics and Engineering, vol.159, issue.1-2, pp.49-77, 1998.
DOI : 10.1016/S0045-7825(98)80103-5

M. M. Neves, H. Rodrigues, and J. M. Guedes, Optimal design of periodic linear elastic microstructures, Computers & Structures, vol.76, issue.1-3, pp.421-429, 2000.
DOI : 10.1016/S0045-7949(99)00172-8

A. A. Novotny, R. A. Feijoo, C. Padra, and E. Taroco, Topological Derivative for Linear Elastic Plate Bending Problems, Control and Cybernetics, vol.34, issue.1, pp.339-361, 2005.

A. A. Novotny, R. Feijoo, E. Taroco, and C. Padra, Topological sensitivity analysis for three-dimensional linear elasticity problem, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.41-44, pp.41-444354, 0199.
DOI : 10.1016/j.cma.2007.05.006

. Osher, Level Set Methods for Optimization Problems Involving Geometry and Constraints, Journal of Computational Physics, vol.171, issue.1, pp.272-288, 2001.
DOI : 10.1006/jcph.2001.6789

K. Park and S. Youn, Topology optimization of shell structures using adaptive inner-front (AIF) level set method. Structural and Multidisciplinary Optimization, pp.43-58, 2008.

J. Parthasarathy, B. Starly, and S. Raman, A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications, Journal of Manufacturing Processes, vol.13, issue.2, pp.160-170, 2011.
DOI : 10.1016/j.jmapro.2011.01.004

R. Piat, Y. Sinchuk, M. Vasoya, and O. Sigmund, Minimal compliance design for metal???ceramic composites with lamellar microstructures, Acta Materialia, vol.59, issue.12, pp.4835-4846, 2011.
DOI : 10.1016/j.actamat.2011.04.026

J. Portier, J. Choy, and M. A. Subramanian, Inoganic???organic-hybrids as precursors to functional materials, International Journal of Inorganic Materials, vol.3, issue.7, pp.581-592, 2001.
DOI : 10.1016/S1466-6049(01)00103-9

D. Queheillalt and H. N. Wadley, Cellular metal lattices with hollow trusses, Acta Materialia, vol.53, issue.2, pp.303-313, 2005.
DOI : 10.1016/j.actamat.2004.09.024

J. N. Reddy, On refined computational models of composite laminates, International Journal for Numerical Methods in Engineering, vol.26, issue.2, pp.361-382, 1989.
DOI : 10.1002/nme.1620270210

S. Roy, R. Hinduja, and . Teti, Recent advances in engineering design optimisation: Challenges and future trends, CIRP Annals - Manufacturing Technology, vol.57, issue.2, pp.697-715, 2008.
DOI : 10.1016/j.cirp.2008.09.007

J. Salençon, Mécanique des milieux continus: Milieux curvilignes, 2002.

G. V. Salmoria, J. L. Leite, and R. A. Paggi, The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering, Polymer Testing, vol.28, issue.7, pp.746-751, 2009.
DOI : 10.1016/j.polymertesting.2009.06.010

K. Schwarz, E. Maute, and . Ramm, Topology and shape optimization for elastoplastic structural response, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.15-17, pp.15-172135, 0201.
DOI : 10.1016/S0045-7825(00)00227-9

J. Schwerdtfeger, F. Wein, G. Leugering, R. F. Singer, C. Körner et al., Design of Auxetic Structures via Mathematical Optimization, Advanced Materials, vol.28, issue.22-23, pp.22-232650, 2011.
DOI : 10.1002/adma.201004090

J. A. Sethian, Level set methods and fast marching methods: evolving interfaces in computational geometry , fluid mechanics, computer vision, and materials science. Cambridge monographs on applied and computational mathematics, p.123, 1999.

J. A. Sethian, Structural Boundary Design via Level Set and Immersed Interface Methods, Journal of Computational Physics, vol.163, issue.2, pp.489-528, 0120.
DOI : 10.1006/jcph.2000.6581
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.40.5067

O. Sigmund and S. Torquato, Design of materials with extreme thermal expansion using a three-phase topology optimization method, Journal of the Mechanics and Physics of Solids, vol.45, issue.6, pp.1037-1067, 1997.
DOI : 10.1016/S0022-5096(96)00114-7

O. Sigmund and S. Torquato, Design of smart composite materials using topology optimization, Smart Materials and Structures, vol.8, issue.3, pp.365-379, 1999.
DOI : 10.1088/0964-1726/8/3/308

J. Soko-lowski and J. P. Zolésio, Introduction to shape optimization: shape sensitivity analysis. Springer series in computational mathematics, 1992.

D. Tcherniak and O. Sigmund, A web-based topology optimization program. Structural and Multidisciplinary Optimization, pp.179-187, 2001.

. Valdevit, Structurally optimized sandwich panels with prismatic cores, International Journal of Solids and Structures, vol.41, pp.18-195105, 1952.

R. Vankeulen, N. Haftka, and . Kim, Review of options for structural design sensitivity analysis. Part 1: Linear systems, Computer Methods in Applied Mechanics and Engineering, vol.194, pp.30-333213, 2005.

H. N. Wadley, Multifunctional periodic cellular metals, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.23, issue.1838, pp.31-68, 1838.
DOI : 10.1098/rsta.2005.1697

A. Walcarius, Electrochemical Applications of Silica-Based Organic???Inorganic Hybrid Materials, Chemistry of Materials, vol.13, issue.10, pp.3351-3372, 1938.
DOI : 10.1021/cm0110167

M. Whitney and A. W. Leissa, Analysis of Heterogeneous Anisotropic Plates, Journal of Applied Mechanics, vol.36, issue.2, pp.261-266, 1969.
DOI : 10.1115/1.3564618

G. Wielage and . Thielemann, Dedicated Applications of Carbon Fiber Reinforced Plastics in Machine Engineering, Advanced Engineering Materials, vol.6, issue.3, pp.151-153, 1949.
DOI : 10.1002/adem.200300547

T. Yamada, K. Izui, S. Nishiwaki, and A. Takezawa, A topology optimization method based on the level set method incorporating a fictitious interface energy, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.45-48, 0200.
DOI : 10.1016/j.cma.2010.05.013

S. Yang, H. G. Lee, and J. Kim, A phase-field approach for minimizing the area of triply periodic surfaces with volume constraint, Computer Physics Communications, vol.181, issue.6, pp.1037-1046, 0201.
DOI : 10.1016/j.cpc.2010.02.010

W. Yu, D. H. Hodges, and V. V. Volovoi, Asymptotic construction of Reissner-like composite plate theory with accurate strain recovery, International Journal of Solids and Structures, vol.39, issue.20, pp.5185-5203, 2002.
DOI : 10.1016/S0020-7683(02)00410-9

W. Yu, D. H. Hodges, and V. V. Volovoi, Asymptotic generalization of Reissner???Mindlin theory: accurate three-dimensional recovery for composite shells, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.44, pp.5087-5109, 2002.
DOI : 10.1016/S0045-7825(02)00440-1

R. H. Zeng, S. Pattofatto, H. Zhao, Y. Girard, and V. Fascio, Perforation of sandwich plates with graded hollow sphere cores under impact loading, International Journal of Impact Engineering, vol.37, issue.11, pp.1083-1091, 2010.
DOI : 10.1016/j.ijimpeng.2010.05.002
URL : https://hal.archives-ouvertes.fr/hal-00520624

. Zenkert, The Handbook of Sandwich Construction, Engineering Materials Advisory Services, p.53, 1997.

C. Zhuang, Z. Xiong, and H. Ding, A level set method for topology optimization of heat conduction problem under multiple load cases, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.4-6, pp.4-61074, 0120.
DOI : 10.1016/j.cma.2006.08.005