. Sur-le-plan-cinétique, autre n'entraîne pas de changement de cinétique d'oxydation tant que l'on reste en atmosphère sèche. La teneur en oxygène (3 ppmV) est suffisante pour oxyder le chrome à ces températures. En revanche, le fait de travailler en atmosphère humide laisse apparaître une différence de comportement entre les atmosphères riches en oxygène

T. Akermark and G. Hultquist, Oxygen exchange in oxidation of an Fe-20Cr-10Al alloy in ???10 mbar O2/H2O-gas mixtures at 920??C, Oxidation of Metals, vol.3, issue.1-2, pp.117-137, 1997.
DOI : 10.1007/BF01682374

E. Anghel, G. Hörnlund, M. Hultquist, and . Limbäck, Gas phase analysis of CO interactions with solid surfaces at high temperatures, Applied Surface Science, vol.233, issue.1-4, pp.392-401, 2004.
DOI : 10.1016/j.apsusc.2004.04.001

H. Asteman, J. E. Svensson, and L. G. Johansson, Oxidation of 310 steel in H2O/O2 mixtures at 600 ??C: the effect of water-vapour-enhanced chromium evaporation, Corrosion Science, vol.44, issue.11, pp.2635-2649, 2002.
DOI : 10.1016/S0010-938X(02)00056-2

]. K. Atkinson, R. Grimes, M. R. Levy, and Z. L. , Accommodation of impurities in ??-Al2O3, ??-Cr2O3 and ??-Fe2O3, Journal of the European Ceramic Society, vol.23, issue.16, pp.3059-3070, 2003.
DOI : 10.1016/S0955-2219(03)00101-8

S. L. Cheng, W. T. Kuan, and . Tsai, Effect of water vapor on annealing scale formation on 316 SS, Corrosion Science, vol.48, issue.3, pp.634-649, 2006.
DOI : 10.1016/j.corsci.2005.02.014

A. Donchev, H. Fietzek, V. Kolarik, D. Renusch, and M. Schütze, The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys, Materials at High Temperatures, vol.22, issue.1, pp.139-146, 2005.
DOI : 10.3184/096034005782750446

]. D. Douglass, P. Kofstad, A. Rahmel, and G. C. Wood, International Workshop on High-Temperature Corrosion, Oxidation of Metals, vol.34, issue.5-6, pp.529-545, 1996.
DOI : 10.1007/BF01046850

D. M. England and A. V. Virkar, Oxidation Kinetics of Some Nickel-Based Superalloy Foils and Electronic Resistance of the Oxide Scale Formed in Air Part I, Journal of The Electrochemical Society, vol.146, issue.9, pp.3196-3202, 1999.
DOI : 10.1149/1.1392454

M. England and A. V. Virkar, Oxidation Kinetics of Some Nickel-Based Superalloy Foils in Humidified Hydrogen and Electronic Resistance of the Oxide Scale Formed Part II, Journal of The Electrochemical Society, vol.148, issue.4, pp.330-338, 2001.
DOI : 10.1149/1.1354611

H. E. Evans, Stress effects in high temperature oxidation of metals, International Materials Reviews, vol.40, issue.1, pp.1-40, 1995.
DOI : 10.1179/imr.1995.40.1.1

H. E. Evans, J. R. Nicholls, and S. R. Saunders, The Influence of Diffusion-Related Mechanisms in Limiting Oxide-Scale Failure, Solid State Phenomena, vol.41, pp.137-156, 1995.
DOI : 10.4028/www.scientific.net/SSP.41.137

]. C. Fujii-64, R. A. Fujii, and . Meussner, The Mechanism of the High-Temperature Oxidation of Iron-Chromium Alloys in Water Vapor, Journal of The Electrochemical Society, vol.111, issue.11, pp.1215-1221, 1964.
DOI : 10.1149/1.2425963

A. Galerie, S. Henry, Y. Wouters, M. Mermoux, J. P. Petit et al., Mechanisms of chromia scale failure during the course of 15???18Cr ferritic stainless steel oxidation in water vapour, Materials at High Temperatures, vol.22, issue.1, pp.105-112, 2005.
DOI : 10.3184/096034005782750527
URL : https://hal.archives-ouvertes.fr/hal-00333238

R. Haugsrud, On the high-temperature oxidation of nickel, Corrosion Science, vol.45, issue.1, pp.211-235, 2003.
DOI : 10.1016/S0010-938X(02)00085-9

S. Henry, J. Mougin, Y. Wouters, J. P. Petit, and A. Galerie, Characterization of Chromia Scales Grown on Pure Chromium in Different Oxidizing Atmospheres, Materials at High Temperatures, vol.17, issue.2, pp.231-234, 2000.
DOI : 10.3184/096034000783640866

G. R. Holcomb and D. E. Alman, The effect of manganese additions on the reactive evaporation of chromium in Ni???Cr alloys, Scripta Materialia, vol.54, issue.10, pp.1821-1825, 2006.
DOI : 10.1016/j.scriptamat.2006.01.026

A. Holt and P. Kofstad, Electrical conductivity and defect structure of Mg-doped Cr2O3, Solid State Ionics, vol.100, issue.3-4, pp.201-209, 1997.
DOI : 10.1016/S0167-2738(97)00352-4

]. A. Holt-99, P. Holt, and . Kofstad, Electrical conductivity of Cr2O3 doped with TiO2, Solid State Ionics, vol.117, issue.1-2, pp.21-25, 1999.
DOI : 10.1016/S0167-2738(98)00244-6

S. R. Hou and . Saunders, A survey of test methods for scale adhesion measurement, Materials at High Temperatures, vol.22, issue.1, pp.121-129, 2005.
DOI : 10.3184/096034005782750482

W. Huang, R. Mader, and . Kirchheim, Hydrogen and oxygen at metal/oxide interfaces, Acta Metallurgica et Materialia, vol.39, issue.5, pp.893-907, 1991.
DOI : 10.1016/0956-7151(91)90289-D

G. Hultquist and P. Szakalos, Catalysed self-cleaning of air on the earth's surface, Journal of Atmospheric Chemistry, vol.14, issue.D16, pp.131-146, 2006.
DOI : 10.1007/s10874-006-9031-0

A. H. Hussain, K. A. Qureshi, N. A. Shahid, F. A. Chughtai, and . Kalid, High-Temperature Oxidation Behavior of HASTELLOY C-4 in Steam, Oxidation of Metals, vol.61, issue.5/6, pp.355-364, 2004.
DOI : 10.1023/B:OXID.0000032328.23022.31

S. Jianian, Z. Longjiang, and L. Tiefan, High-temperature oxidation of Fe-Cr alloys in wet oxygen, Oxidation of Metals, vol.116, issue.3-4, pp.347-356, 1997.
DOI : 10.1007/BF01670507

J. R. Johnson and I. Panas, Water Adsorption and Hydrolysis on Molecular Transition Metal Oxides and Oxyhydroxides, Inorganic Chemistry, vol.39, issue.15, pp.3181-3191, 2000.
DOI : 10.1021/ic991150h

J. R. Johnson and I. Panas, Hydrolysis on Transition Metal Oxide Clusters and the Stabilities of M???O???M Bridges, Inorganic Chemistry, vol.39, issue.15, pp.3192-3204, 2000.
DOI : 10.1021/ic991144l

P. Kofstad, Defects and transport properties of metal oxides, Oxidation of Metals, vol.36, issue.1-2, pp.3-27, 1995.
DOI : 10.1007/BF01046721

R. Larring, T. Haugsrud, and . Norby, HT Corrosion of a Cr-5 wt % Fe-1 wt % Y[sub 2]O[sub 3] Alloy and Conductivity of the Oxide Scale, Journal of The Electrochemical Society, vol.150, issue.8, pp.374-379, 2003.
DOI : 10.1149/1.1587726

K. Larsson, H. Bjökman, and K. Hjort, Role of water and oxygen in wet and dry oxidation of diamond, Journal of Applied Physics, vol.90, issue.2, pp.1026-1034, 2001.
DOI : 10.1063/1.1376671

K. W. Mcelhaney and Q. Ma, Investigation of moisture-assisted fracture in SiO2 films using a channel cracking technique, Acta Materialia, vol.52, issue.12, pp.3621-3629, 2004.
DOI : 10.1016/j.actamat.2004.04.014

R. Mevrel and R. Pichoir, Les rev??tements par diffusion, Materials Science and Engineering, vol.88, pp.1-9, 1984.
DOI : 10.1016/0025-5416(87)90060-7

L. Minervini and R. W. Grimes, Defect clustering in w??stite, Journal of Physics and Chemistry of Solids, vol.60, issue.2, pp.235-245, 1999.
DOI : 10.1016/S0022-3697(98)00273-X

D. Monceau and D. Poquillon, Continuous Thermogravimetry Under Cyclic Conditions, Oxidation of Metals, vol.61, issue.1/2, pp.143-163, 2004.
DOI : 10.1023/B:OXID.0000016281.25965.93

N. Nishimura, Y. Komai, and . Hirayama, Japanese experience with steam oxidation of advanced heat-resistant steel tubes in power boilers, Materials at High Temperatures, vol.22, issue.1, pp.3-10, 2005.
DOI : 10.3184/096034005782750554

N. K. Othman, J. Zhang, and D. J. Young, Temperature and water vapour effects on the cyclic oxidation behaviour of Fe???Cr alloys, Corrosion Science, vol.52, issue.9, pp.2827-2836, 2010.
DOI : 10.1016/j.corsci.2010.04.026

X. Peng, J. Yan, Y. Zhou, and F. Wang, Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air, Acta Materialia, vol.53, issue.19, pp.5079-5088, 2005.
DOI : 10.1016/j.actamat.2005.07.019

B. Pieraggi, C. Rolland, and P. Bruckel, Morphological characteristics of oxide scales grown on H11 steel oxidised in dry or wet air, Materials at High Temperatures, vol.22, issue.1, pp.61-68, 2005.
DOI : 10.3184/096034005782750617

A. Rahmel and J. Tobolski, Einfluss von wasserdampf und kohlendioxyd auf die oxydation von eisen in sauerstoff bei hohen temperaturen, Corrosion Science, vol.5, issue.5, pp.333-346, 1965.
DOI : 10.1016/S0010-938X(65)90500-7

G. M. Raynaud and R. A. Rapp, In situ observation of whiskers, pyramids and pits during the high-temperature oxidation of metals, Oxidation of Metals, vol.10, issue.3, pp.89-102, 1984.
DOI : 10.1007/BF00659470

M. Schütze, Protectiv oxide scales and their breakdown, 1997.

A. Srisrual, S. Coindeau, A. Galerie, J. Petit, and Y. Wouters, Identification by photoelectrochemistry of oxide phases grown during the initial stages of thermal oxidation of AISI 441 ferritic stainless steel in air or in water vapour, Corrosion Science, vol.51, issue.3, pp.562-568, 2009.
DOI : 10.1016/j.corsci.2008.12.002
URL : https://hal.archives-ouvertes.fr/hal-00384854

R. L. Tallman and E. A. Gulbransen, Crystal Morphology and Mechanisms of Growth of Alpha-Fe[sub 2]O[sub 3] Whiskers on Iron, Journal of The Electrochemical Society, vol.114, issue.12, pp.1227-1230, 1967.
DOI : 10.1149/1.2426455

S. C. Tsaï and A. M. Huntz, Diffusion of18O in massive Cr2O3 and in Cr2O3 scales at 900???C and its relation to the oxidation kinetics of chromia forming alloys, Oxidation of Metals, vol.3, issue.1/2, pp.581-602, 1995.
DOI : 10.1007/BF01046900

G. C. Wood, I. G. Wright, T. Hodgkiess, and D. P. Whittle, A Comparison of the Oxidation of Fe&?Cr, Ni?Cr and Co?Cr alloys in oxygen and water vapour, Materials and Corrosion/Werkstoffe und Korrosion, vol.230, issue.11, pp.900-910, 1970.
DOI : 10.1002/maco.19700211105

G. Yang, P. Xia, J. W. Singh, and . Stevenson, Effects of water vapor on oxidation behavior of ferritic stainless steels under solid oxide fuel cell interconnect exposure conditions, Solid State Ionics, vol.176, issue.17-18, pp.1495-1503, 2005.
DOI : 10.1016/j.ssi.2005.03.019

D. J. Young, High Temperature Oxidation and Corrosion of Metals, p.483, 2008.

C. Zhou, J. Yu, S. Gong, and H. Xu, Influence of water vapor on the isothermal oxidation behavior of low pressure plasma sprayed NiCrAlY coating at high temperature, Surface and Coatings Technology, vol.161, issue.1, pp.86-91, 2002.
DOI : 10.1016/S0257-8972(02)00398-5