J. C. Redondo and . Soares, Nuclear Instruments and Methods in Physics Research, pp.1-4, 1998.

G. C. Allen, P. J. Harris, and G. A. Swallow, Oxidation of metal surfaces studied by reflectance spectroscopy, Surface Technology, vol.6, issue.2, pp.111-129, 1977.
DOI : 10.1016/0376-4583(77)90002-4

G. C. Allen and G. A. Swallow, Reflectance spectroscopy of oxide films. II. Oxide layers on chromium metal, Oxidation of Metals, vol.A, issue.1-2, pp.157-176, 1982.
DOI : 10.1007/BF00606198

J. Manuel-gallardo-amores, V. Sanchez-escribano, and G. Busca, Characterisation of Fe???Cr???Al mixed oxides, Materials Chemistry and Physics, vol.60, issue.2, pp.168-176, 1999.
DOI : 10.1016/S0254-0584(99)00056-5

S. Baleix, G. Bernhart, and P. Lours, Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies, Materials Science and Engineering: A, vol.327, issue.2, pp.155-164, 2002.
DOI : 10.1016/S0921-5093(01)01529-5

J. Bénard, L'oxydation des métaux ? tome II : Monographies, Gauthier-Villard Eds, 1964.

J. H. Chen, P. M. Rogers, and J. A. Little, Oxidation behavior of several chromia-forming commercial nickel-base superalloys, Oxidation of Metals, vol.24, issue.5-6, pp.381-407, 1997.
DOI : 10.1007/BF02134783

C. M. Cotell, G. J. Yurek, R. J. Hussey, D. F. Mitchell, and M. J. Graham, The Influence of Implanted Yttrium on the Mechanism of Growth of Cr[sub 2]O[sub 3] on Cr, Journal of The Electrochemical Society, vol.134, issue.7, pp.1871-1883, 1987.
DOI : 10.1149/1.2100775

D. L. Douglass and F. Rizzo-assuncao, The oxidation of Fe-19.6Cr-15.1Mn stainless steel, Oxidation of Metals, vol.12, issue.55, pp.271-287, 1988.
DOI : 10.1007/BF00751800

J. W. Elmer, J. Wong, and T. Ressler, In-situ observations of phase transformations during solidification and cooling of austenitic stainless steel welds using time-resolved x-ray diffraction, Scripta Materialia, vol.43, issue.8, pp.751-757, 2000.
DOI : 10.1016/S1359-6462(00)00481-4

H. E. Evans, D. A. Hilton, R. A. Holm, and S. J. Webster, Influence of silicon additions on the oxidation resistance of a stainless steel, Oxidation of Metals, vol.21, issue.1-2, pp.1-2, 1983.
DOI : 10.1007/BF00656225

S. A. Francis and A. H. Ellison, Infrared Spectra of Monolayers on Metal Mirrors, Journal of the Optical Society of America, vol.49, issue.2, pp.131-138, 1959.
DOI : 10.1364/JOSA.49.000131

H. C. Graham and H. H. Davis, Oxidation/Vaporization Kinetics of Cr2O3, Journal of the American Ceramic Society, vol.71, issue.8, pp.89-93, 1971.
DOI : 10.1063/1.1701005

M. J. Graham and R. J. Hussey, Analytical techniques in high temperature corrosion, Oxidation of Metals, vol.39, issue.56, pp.339-374, 1995.
DOI : 10.1007/BF01046732

R. G. Greenler, Infrared Study of Adsorbed Molecules on Metal Surfaces by Reflection Techniques, The Journal of Chemical Physics, vol.44, issue.1, pp.310-315, 1966.
DOI : 10.1063/1.1726462

R. G. Greenler, Reflection Method for Obtaining the Infrared Spectrum of a Thin Layer on a Metal Surface, The Journal of Chemical Physics, vol.50, issue.5, pp.1963-1968, 1969.
DOI : 10.1063/1.1671315

R. G. Greenler, R. R. Rhan, and J. P. Schwartz, The effect of index of refraction on the position, shape, and intensity of infrared bands in reflection-absorption spectra*1, Journal of Catalysis, vol.23, issue.1, pp.42-48, 1971.
DOI : 10.1016/0021-9517(71)90022-4

A. Gutiérrez, M. F. Lopez, F. J. Trujillo, M. P. Hierro, and F. Pedraza, Effects of Ce, Mo and Si ion implantation on the passive layer composition and high-temperature oxidation behaviour of AISI 304 stainless-steel studied by soft x-ray absorption spectroscopy, Surface and Interface Analysis, vol.38, issue.109, pp.130-134, 2000.
DOI : 10.1002/1096-9918(200008)30:1<130::AID-SIA781>3.0.CO;2-0

P. Y. Hou and J. Stringer, The effect of surface-applied reactive metal oxides on the high temperature oxidation of alloys, Materials Science and Engineering, vol.87, pp.295-302, 1987.
DOI : 10.1016/0025-5416(87)90392-2

A. Hunter and M. Ferry, Phase formation during solidification of AISI 304 austenitic stainless steel, Scripta Materialia, vol.46, issue.4, pp.253-258, 2002.
DOI : 10.1016/S1359-6462(01)01215-5

A. M. Huntz, Diffusion dans les couches d'oxyde en cours de croissance, Journal de Physique III, vol.5, issue.11, pp.1729-1757, 1995.
DOI : 10.1051/jp3:1995221
URL : https://hal.archives-ouvertes.fr/jpa-00249411

A. M. Huntz, A. Reckmann, C. Haut, C. Sévérac, M. Herbst et al., Oxidation of AISI 304 and AISI 439 stainless steels, Materials Science and Engineering: A, vol.447, issue.1-2, pp.266-276, 2007.
DOI : 10.1016/j.msea.2006.10.022
URL : https://hal.archives-ouvertes.fr/hal-00192359

R. Jasinski and A. Lob, FTIR Measurements of Iron Oxides on Low Alloy Steel, Journal of The Electrochemical Society, vol.135, issue.3, pp.551-556, 1988.
DOI : 10.1149/1.2095656

D. Landolt, Corrosion et chimie de surfaces des métaux : Traité des matériaux, Presses Polytechniques et Universitaires Romandes, 1993.

M. Lenglet and F. Hochu, CORRELATION BETWEEN IONIC-COVALENT PARAMETERS AND INFRARED SPECTROSCOPIC DATA IN II-III TRANSITION METAL SPINEL-TYPE OXIDES, Materials Research Bulletin, vol.32, issue.7, pp.863-872, 1997.
DOI : 10.1016/S0025-5408(97)00065-2

E. M. Levin, C. R. Robbins, and H. F. Mcmurdie, Phase diagrams for ceramists, p.28, 1981.

K. P. Lillerud and P. Kofstad, On High Temperature Oxidation of Chromium, Journal of The Electrochemical Society, vol.127, issue.11, pp.2397-2402, 1980.
DOI : 10.1149/1.2129478

M. F. Lopez, A. Gutiérrez, F. J. Pérez, M. P. Hierro, and F. , Soft X-ray absorption spectroscopy study of the effects of Si, Ce, and Mo ion implantation on the passive layer of AISI 304 stainless steel, Corrosion Science, vol.45, issue.9, pp.2043-2053, 2003.
DOI : 10.1016/S0010-938X(03)00029-5

H. D. Lutz, B. Müller, and H. J. Steiner, Lattice vibration spectra. LIX. Single crystal infrared and Raman studies of spinel type oxides, Journal of Solid State Chemistry, vol.90, issue.1, pp.54-60, 1991.
DOI : 10.1016/0022-4596(91)90171-D

J. M. Machefert, M. L. Calvar, and M. Lenglet, FTIR study of nickel and copper oxidation: Theoretical approach and experience, Surface and Interface Analysis, vol.8, issue.3, pp.137-142, 1991.
DOI : 10.1002/sia.740170304

A. U. Malik and D. P. Whittle, Oxidation of Fe-C alloys in the temperature range 600?850???C, Oxidation of Metals, vol.54, issue.5-6, pp.339-357, 1981.
DOI : 10.1007/BF00611348

F. P. Mertens, Reflectance Infrared Study of the Oxidation of Stainless Steels and Component Metals, CORROSION, vol.34, issue.10, pp.359-364, 1978.
DOI : 10.5006/0010-9312-34.10.359

S. K. Mitra, S. K. Roy, and S. K. , Influence of superficial coating of CeO2 on the oxidation behavior of AISI 304 stainless steel, Oxidation of Metals, vol.18, issue.3-4, pp.221-229, 1993.
DOI : 10.1007/BF00665613

D. P. Moon and M. J. Bennett, The Effects of Reactive Element Oxide Coatings on the Oxidation Behaviour of Metals and Alloys at High Temperatures, Materials Science Forum, vol.43, pp.269-298, 1989.
DOI : 10.4028/www.scientific.net/MSF.43.269

H. Nagai, Effect of Rare Earth Metals and Oxides Addittion on the High Temperature Oxidation of Ni-Cr and Fe-Cr Alloys, Materials Science Forum, vol.43, pp.75-130, 1989.
DOI : 10.4028/www.scientific.net/MSF.43.75

A. Paúl, R. Sanchez, O. M. Montes, and J. A. Odriozola, The Role of Silicon in the Reactive-Elements Effect on the Oxidation of Conventional Austenitic Stainless Steel, Oxidation of Metals, vol.383, issue.1-2, pp.87-105, 2007.
DOI : 10.1007/s11085-006-9046-6

R. Pendse and J. Stringer, The influence of alloy microstructure on the oxide peg morphologies in a Co-10% Cr-11%Al alloy with and without reactive element additions, Oxidation of Metals, vol.125, issue.6, pp.1-16, 1985.
DOI : 10.1007/BF01095804

F. J. Pérez, M. P. Hierro, M. C. Carpintero, C. Gomez, and F. Pedraza, Silicon/silicon oxide coating on AISI 304 stainless steel by CVD in FBR: analysis of silicides and adherence of coating, Surface and Coatings Technology, vol.160, issue.1, pp.87-92, 2002.
DOI : 10.1016/S0257-8972(02)00160-3

B. A. Pint, Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect, Oxidation of Metals, vol.120, issue.60, pp.1-2, 1996.
DOI : 10.1007/BF01046818

G. W. Poling, Infrared Reflection Studies of the Oxidation of Copper and Iron, Journal of The Electrochemical Society, vol.116, issue.7, pp.958-963, 1969.
DOI : 10.1149/1.2412184

K. Przybylski and G. J. Yurek, The Influence of Implanted Yttrium on the Mechanisms of Growth of Chromia Scales, Materials Science Forum, vol.43, pp.1-74, 1989.
DOI : 10.4028/www.scientific.net/MSF.43.1

L. V. Ramanathan, 11 th International Corrosion Congress, Florence Italy 2-6 april 1990, proceeding edit : associazione italiana di metallurgia, pp.177-184

T. N. Rhys-jones and H. J. Grabke, Use of cerium and cerium oxide additions to improve high temperature oxidation behaviour of Fe???Cr alloys, Materials Science and Technology, vol.57, issue.5, pp.446-458, 1988.
DOI : 10.1016/0010-938X(87)90119-3

F. Riffard, H. Buscail, E. Caudron, R. Cueff, C. Issartel et al., In-situ characterization of the oxide scale formed on yttrium-coated 304 stainless steel at 1000 ??C, Materials Characterization, vol.49, issue.1, pp.55-65, 2002.
DOI : 10.1016/S1044-5803(02)00278-4

F. Riffard, H. Buscail, E. Caudron, R. Cueff, C. Issartel et al., The influence of implanted yttrium on the cyclic oxidation behaviour of 304 stainless steel, Applied Surface Science, vol.252, issue.10, pp.3697-3706, 2006.
DOI : 10.1016/j.apsusc.2005.05.054

S. R. Robert, N. Taki, and L. P. Cook, Phase diagrams for ceramists, p.31, 1981.

Y. Saito, T. Maruyama, and T. , Adherence of oxide scale formed on Ni???20Cr???1Si alloys with small additions of rare earth elements, Materials Science and Engineering, vol.87, pp.275-280, 1987.
DOI : 10.1016/0025-5416(87)90389-2

M. Skeldon, J. M. Calvert, and D. G. Lees, An investigation of the growth-mechanism of Cr2O3 on pure chromium in 1 atm oxygen at 950??? C, Oxidation of Metals, vol.296, issue.1-2, pp.109-123, 1987.
DOI : 10.1007/BF00666474

S. Suzuki, T. Kosaka, H. Inoue, M. Isshiki, and Y. Waseda, Effect of the surface segregation of chromium on oxidation of high-purity Fe???Cr alloys at room temperature, Applied Surface Science, vol.103, issue.4, pp.495-502, 1996.
DOI : 10.1016/S0169-4332(96)00552-1

G. A. Swallow and G. C. Allen, Reflectance spectroscopy of oxide films. I. A theoretical study, Oxidation of Metals, vol.17, issue.11, pp.141-156, 1982.
DOI : 10.1007/BF00606197

C. S. Tedmon, The Effect of Oxide Volatilization on the Oxidation Kinetics of Cr and Fe-Cr Alloys, Journal of The Electrochemical Society, vol.113, issue.8, pp.766-768, 1966.
DOI : 10.1149/1.2424115

S. C. Tsai, A. M. Huntz, and C. Dolin, Diffusion of18O in massive Cr2O3 and in Cr2O3 scales at 900???C and its relation to the oxidation kinetics of chromia forming alloys, Oxidation of Metals, vol.3, issue.1/2, pp.581-602, 1995.
DOI : 10.1007/BF01046900

K. Volenik, J. Leitner, F. Hanousek, J. Dubsky, and B. Kolman, Oxides in plasma-sprayed chromium steel, Journal of Thermal Spray Technology, vol.35, issue.2, pp.327-334, 1997.
DOI : 10.1007/s11666-997-0067-8

C. Wagner, Theoretical Analysis of the Diffusion Processes Determining the Oxidation Rate of Alloys, Journal of The Electrochemical Society, vol.99, issue.10, pp.369-380, 1952.
DOI : 10.1149/1.2779605

C. H. Yang, P. A. Labun, G. Welsch, T. E. Mitchell, and M. J. Bennett, Influence of ion implantation on the microstructure of oxide scales formed on a 20Cr/25Ni/Nb-stabilized stainless steel in carbon dioxide at 825?? C, Journal of Materials Science, vol.14, issue.2, pp.449-458, 1987.
DOI : 10.1007/BF01160752