, Pipeline Statistics, Distribution and Transmission, Annual Mileage Totals, (www.gri.org/pub), 2002.
, Rupture par fissuration des structures, HERMES, 1995.
, Matériaux polymères: structure, propriétés et applications, Hermes Science, 2000.
, Brittle???tough transition of rapid crack propagation in polyethylene, Polymer, vol.39, issue.25, pp.6657-6663, 1998.
DOI : 10.1016/S0032-3861(97)10336-6
, Experimental investigation of neck propagation in polymers, Polymer, vol.30, issue.4, pp.636-642, 1989.
DOI : 10.1016/0032-3861(89)90147-X
, Video-controlled tensile testing of polymers and metals beyond the necking point, Journal of Materials Science, vol.264, issue.18, pp.5031-5040, 1992.
DOI : 10.1007/BF01105270
, Crazing in semi crystalline thermoplastics , Advance in polymer science, pp.353-391, 1990.
, Mechanical properties of fibrous structure, extrait de '' ultra-high modulus polymers, pp.279-320, 1979.
, Review: The yield behaviour of polymers, Journal of Materials Science, vol.2, issue.7, pp.1397-1417, 1971.
DOI : 10.1007/BF00549685
, Crazing in semicrystalline thermoplastics, Journal of Macromolecular Science, Part B, vol.8, issue.2, pp.38-43, 1999.
DOI : 10.1080/00222349908248140
, Molecular model of drawing polyethylene and polypropylene, Journal of Materials Science, vol.5, issue.197, pp.490-508, 1971.
DOI : 10.1007/BF00550305
, The micromechanics of polymer fracture, International Journal of Fracture, vol.11, issue.4, pp.629-639, 1975.
DOI : 10.1007/BF00116370
, A molar mass induced transition in the yielding properties of linear polyethylene, Polymer, vol.44, issue.6, pp.1941-1947, 2003.
DOI : 10.1016/S0032-3861(03)00036-3
, Essais mécaniques des plastiques. Caractéristiques à long terme et ténacité, Techniques de l'ingénieur, Traité plastiques et composites, 1999.
, Comportement à long terme des déformations résiduelles dans les tubes de gaz en PE-HD, Séminaire international de Génie Mécanique, 2002.
, Crazing and fracture of polymer, extrait de ''Materials science and technology, A comprehensive treatment'
, Lifetime of HDPE drain Pipe in an aggressive environment, TRB 2006 Annual Meeting
, Experimental Study of Stress, Cracking in High Density Polyethylene Pipes, 2005.
, Formation and rupture of grafted polyethylene/aluminium interfaces, International Journal of Adhesion and Adhesives, vol.4, issue.4, pp.163-168, 1984.
DOI : 10.1016/0143-7496(84)90024-1
, The ductile-brittle transition in a polyethylene copolymer, Journal of Materials Science, vol.19, issue.1, pp.25-29, 1990.
DOI : 10.1007/BF00544180
, Endommagement et fissuration en fluage de Polyethylène extrudés : Approche locale-Approche globale, Thèse de doctorat, p.267, 2000.
, Creep Damage mechanisms in Polyethylene gas pipe, Polymer, pp.5425-5437, 2001.
, The ductile-brittle transition in a polyethylene copolymer, Journal of Materials Science, vol.19, issue.1, pp.29-34, 1990.
DOI : 10.1007/BF00544180
, Discontinuous crack growth in polyethylene under a constant load, Journal of Materials Science, vol.22, issue.4, pp.917-924, 1991.
DOI : 10.1007/BF00576768
, Slow crack growth in polyethylene: A novel predictive model based on the creep of craze fibrils, Journal of Applied Polymer Science, vol.54, issue.13, pp.2119-2124, 1994.
DOI : 10.1002/app.1994.070541314
, Understanding of the tensile deformation in HDPE/LDPE blends based on their crystal structure and phase morphology, Polymer, vol.44, issue.6, pp.44-1927, 2003.
DOI : 10.1016/S0032-3861(02)00940-0
, Drawing of single-crystal mats of linear polyethylene, Journal of Polymer Science Part A-2: Polymer Physics, vol.7, issue.12, pp.2029-2041, 1969.
DOI : 10.1002/pol.1969.160071205
, Plastic Deformation of semi-crystalline polymers, extrait de « Plastic deformation of amorphous and semi-crystallin materials »
, Double yield point in Plyethylene under tnsile loaing, Journal of Material Science, vol.9, issue.1, pp.46-47, 1990.
, Small angle X ray diffractin studies of plastically deformed Polyethylene III-Small draw ratios, Makromolekulare chimie, pp.227-240, 1971.
, Microstructural aspects of failure in semicrystalline polymer, Polymer engineering and science, pp.770-785, 1984.
, Crazes and sbear bands in semi-crystalline thermoplastics Advances in polymer science, pp.225-274, 1983.
, The role of individual chains in polymer deformation, Polymer, vol.35, issue.18, pp.35-3848, 1994.
DOI : 10.1016/0032-3861(94)90267-4
, The role of crazes in the crack growth of polyethylene, Journal of Materials Science, vol.11, issue.7, pp.2470-2476, 1987.
DOI : 10.1007/BF01082132
, The dependence of butyl bancb density on slow crack growth in Polyethylene : kinetics, journal of polymer science : Part B : Polymer physics, pp.2007-2021, 1990.
, Effect of tie molecules on the craze strength of olypropylene, Polymer, issue.24, pp.37-5375, 1996.
, A quality control test for predicting the lifetime of Polyethylene pipes, fitting and resins, Journal of Materials Science, vol.26, issue.20, pp.617-623, 1991.
, Experimental approach to mechanical property variability through a high-density polyethylene gas pipe wall, Journal of Applied Polymer Science, vol.33, issue.1, 2004.
DOI : 10.1002/app.21713
, Fracture Mechanics :sixteenth symposium/ West Conshohocken, ASTM STP 868, 1985.
, La rupture des matériaux, Sciences, 2003.
, Scanning electron microscope visualisation of crack initiation and propagation under static and fatigue loading on thermoplastic elastomers, International Journal of Fatigue, vol.27, issue.1, pp.71-84, 2005.
DOI : 10.1016/j.ijfatigue.2004.05.005
, Comportement mécanique des matériaux- Elasticité et plasticité, 1995.
, Matériaux polymères: Strucure-Propriètés et Applications, 2000.
, Vieillissement et durabilité des polymères à usage industriel, Innovation 128, 2001.
, Recent developments in fatigue crack growth assessment, International Journal of Fatigue, vol.28, issue.12, 2006.
DOI : 10.1016/j.ijfatigue.2006.01.004
, Slow crack propagation in polyethylene under fatigue at controlled stress intensity, Polymer, vol.43, issue.4, pp.1375-1382, 2002.
DOI : 10.1016/S0032-3861(01)00701-7
, Accelerated test for evaluating slow crack growth of polyethylene copolymers in Igepal and air, Polymer engineering and science, 1990.
, Comparative crack layer analysis of fatigue and creep crack propagation in high density polyethylene, Polymer, 1990.
, Fatigue performance of ultra-high-molecular-weight polyethylene: effect of gamma radiation sterilization, Biomaterials, vol.17, issue.20, pp.1929-1935, 1996.
DOI : 10.1016/0142-9612(96)82602-0
, Correlation of fatigue and creep slow crack growth in a medium density polyethylene pipe material, Journal of Materials Science, vol.35, issue.11, pp.2659-2674, 2000.
DOI : 10.1023/A:1004789522642
, Compliance calibration for fatigue crack propagation testing of ultra high molecular weight polyethylene, Biomaterials, vol.27, issue.27, pp.4693-4697, 2006.
DOI : 10.1016/j.biomaterials.2006.05.003
, Mechanisms of deformation in the fatigue of polyethylene pipe, Journal of Materials Science, vol.22, issue.9, pp.2277-2282, 1993.
DOI : 10.1007/BF01151653
, Struture and Crack Growth in Gas Pipes, Polymer Engineering And Science, vol.36, issue.16, 1996.
, Two new criteria for the service life prediction of plastics pipes, Polymer Testing, pp.967-972, 2004.
, Analysis of the non-linear creep of high-density polyethylene, Polymer, pp.93-99, 1995.
, Statistical distribution functions and fatigue of structures, International Journal of Fatigue, vol.27, issue.9, pp.1031-1039, 2005.
DOI : 10.1016/j.ijfatigue.2005.03.001
, Statistical analysis of slow crack growth experiments, Journal of the Europeen Ceramic Society, vol.26, pp.3061-3065, 2006.
, Statistical aspects of some fatigue crack growth data, Engineering Fracture Mechanics, vol.74, issue.18, 2006.
DOI : 10.1016/j.engfracmech.2006.08.019
, Application of Lambda Distributions and Bootstrap analysis to the prediction of fatigue lifetime and confidence intervals, International Journal of Fatigue, vol.28, issue.3, pp.223-236, 2006.
DOI : 10.1016/j.ijfatigue.2005.06.033
, Release 13.0. for windows. PA state college, Minitab, 1047.
, Notch generation and geometry in quality control test specimens , Polymer Testing, Volme7, pp.225-237, 1987.
, essais mécaniques et lois de comportement, Hermes Science, 2001.
, Polyéthylène haute densité PE-HD, Technique de l'ingénieur, traité plastiques et composites A, pp.2-1996
, Tableau comparatifs, Technique de l'ingénieur, traité plastiques et composites, Propriétés des thermoplastiques, pp.10-1998
, Fatigue des structures : endurance, critères de dimensionnement, propagation des fissures, rupture, Ellipses, 2005.
, Fatigue behavior of calcium carbonate filled polypropylene under high frequency loading, Materials & Design, vol.28, issue.3, pp.816-823, 2007.
DOI : 10.1016/j.matdes.2005.11.009
, Resampling methods for variable selection in robust regression, Computational Statistics & Data Analysis, vol.43, issue.3, 2003.
DOI : 10.1016/S0167-9473(02)00235-9
, An introduction to the Bootstrap, Monographs on statistics and applied probability 57, 1993.
, Analyse quantitative et utilité du retour d'expérience pour la maintenance des matériels et la sécurité, collection de la direction des études et recherches d, 1996.
, Determination of sample size for estimation of fatigue life by using Weibull or lognormal distribution, International Journal of Fatigue, vol.21, issue.8, pp.745-752, 1999.
, Maximum log-likelihood ratio test for a change in three parameter Weibull distribution, Journal of Statistical Planning and Inference, vol.137, issue.6, pp.1805-1815, 2007.
DOI : 10.1016/j.jspi.2006.03.013
, Application of crack layer theory to modelling of slow crack growth in polyethylene, International Journal of Fracture, vol.97, issue.1/4, pp.83-102, 1999.
DOI : 10.1023/A:1018683624720
, Physical and mechanical properties of PE pipes in relation to molecular architecture
URL : https://hal.archives-ouvertes.fr/hal-00475482
, Consequences of residual stress on crack propagation in PE Pipes, Proc. 10 th Inter. Conf. Experim. Mech, pp.811-816, 1994.
, The relative influences of molecular structure on brittle fracture by fatigue and under constant load in polyethylenes, Polymer Engineering & Science, vol.196, issue.16, pp.36-2101, 1996.
DOI : 10.1002/pen.10606
, Fracture initiation associated with chemical degradation: observation and modeling, International Journal of Solids and Structures, vol.42, issue.2
DOI : 10.1016/j.ijsolstr.2004.06.028
, Transition, Mechanical behaviour of materials, 1998.
, Rupture, Tests et essais des polymères, pp.12-1976
, J0.2-values by impact testing, Polymer Testing, vol.18, issue.8, pp.641-647, 1999.
DOI : 10.1016/S0142-9418(98)00065-8
, A study of brittle-ductile transition in polyethylene, Polymer Engineering & Science, vol.36, issue.53, pp.777-788, 1997.
DOI : 10.1002/pen.11721
, Effect of entanglement on brittle-ductile transition in polyethylene, Polymer Engineering & Science, vol.36, issue.7, pp.1146-1156, 2001.
DOI : 10.1002/pen.10816
, Comportement Mécanique des matériaux, Editions Hermès, 1993.
, Contribution à l'étude d'un milieu élasto-plastique fissuré aux états limites de rupture et de fatigue, Thèse de Doctorat, 1996.
, Une nouvelle approche expérimentale pour l'étude de la variabilité des Propriétés Mécaniques des tubes semi-cristallins en HDPE 80, Thèse de Doctorat, 2005.
, Nocivité des fissures dans le Polyéthylène, 1995.
, A plane-strain tensile specimen to determine ductile-brittle transitions in PE pipe grade resins, Ninth plastic fuel gas pipe symposium, 1985.
, Craze testing for tough polyethylene, J. Mater. Sci, vol.33, pp.625-638, 1998.
, Two new criteria for the service life prediction of plastics pipes, Polymer Testing, vol.23, issue.8, 2004.
DOI : 10.1016/j.polymertesting.2004.04.010
, Brittle-ductile transitions in polyethylene, Polymer Engineering & Science, vol.33, issue.7, pp.1493-1508, 2002.
DOI : 10.1002/pen.11046
, A total dissipated energy theory of fatigue crack growth in ductile solids, International Journal of Fatigue, vol.25, issue.2, pp.117-128, 2003.
DOI : 10.1016/S0142-1123(02)00073-7
, Reference Standard Polyethylene Resins and Piping Materials, GRI Final, 1987.
DOI : 10.6028/nbs.ir.88-3705
, Fracture toughening behavior of elastomer modified polyphenylene ether/polyamide blends, European Polymer Journal, vol.34, issue.11, pp.1565-1570, 1998.
DOI : 10.1016/S0014-3057(98)00012-3
, Bridging the PE lifetime under fatigue and creep conditions with its crystallization behavior, Journal of Applied Polymer Science, vol.49, issue.5, pp.863-875, 1999.
DOI : 10.1002/app.1993.070490512
, Correlation of stepwise fatigue and creep slow crack growth in high-density polyethylene, Journal of Materials Science, vol.35, issue.8, pp.1857-1866, 2000.
DOI : 10.1023/A:1004741713514
, Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE), Engineering Fracture Mechanics, vol.74, issue.14, pp.2187-2204, 2007.
DOI : 10.1016/j.engfracmech.2006.10.009
URL : https://hal.archives-ouvertes.fr/hal-00154573
, Viscoplastic behaviour of a medium density polyethylene (MDPE): Constitutive equations based on double nonlinear deformation model, International Journal of Plasticity, vol.23, pp.1307-1327, 2007.
DOI : 10.1016/j.ijplas.2007.01.005
URL : https://hal.archives-ouvertes.fr/hal-00154584
, Fiabilité des structures des installations industrielles, Théorie et applications de la mécanique probabiliste, Editions EYROLLES, 1996. Structures, Couplage Mécano-Fiabiliste Statique, pp.7462-1057, 2005.
, Prediction of long-term mechanical behaviour and lifetime of polymeric materials , Polymer Testing, pp.311-332, 1998.
, The relationship between slow crack propagation and tensile creep behaviour in polyethylene, Polymer, pp.2355-2362, 1995.
, PHIMECA-Reliability-based design and analysis.Users Manual, 2004.
, A general procedure for first/ second-order reliability method (FORM/SORM), Structural Safety, vol.21, pp.95-112, 1999.
, Uncertainty analyses in fault trees and Bayesian networks using FORM/SORM methods, Reliability Engineering & System Safety, vol.65, issue.1, pp.29-40, 1999.
DOI : 10.1016/S0951-8320(98)00083-0
, Calculs probabilistes de la sécurité des constructions, Annales des Ponts et Chaussées, issue.4, pp.493-539, 1949.
, Exact and Invariant Second Moment Code Format, Journal of the Engineering Mechanics Division, vol.100, pp.111-121, 1974.
, Strength, Safety and Economical Dimensions of Structures, Stockolm: Statens Kommitte fôr Byggnadsforskning, 1953.
, The Safety of Structures, 1966.
, On statistical moments of fatigue crack propagation, Engineering Fracture Mechanics, vol.18, issue.2, pp.243-356, 1983.
DOI : 10.1016/0013-7944(83)90136-4
, A probabilistic damage tolerance concept for welded joints. Part 1: data base and stochastic modelling, Marine Structures, vol.15, issue.6, pp.599-613, 2002.
DOI : 10.1016/S0951-8339(02)00020-5
, Structural Reliability Theory and its Applications, 1982.
DOI : 10.1007/978-3-642-68697-9
, Structural Reliability Analysis and Prediction, 1999.
, A general procedure for first/ second-order reliability method (FORM/SORM), Structural Safety, vol.21, pp.95-112, 1999.
, Reliability analysis-a review and some perspectives, structural safety, pp.365-395, 2001.
, Structural reliability codes for probabilistic design ? a debate paper based on elementary reliability and decision analysis concepts, Structural Safety, pp.253-270, 1997.
, Structural reliability methods, 1996.
, Reliability of Underground Pipelines Subject to Corrosion, Journal of Transportation Engineering, vol.120, issue.6, 1994.
DOI : 10.1061/(ASCE)0733-947X(1994)120:6(989)
, Pipe under Complex Loading: a Probabilistic Approach, Marine Structures, 1995.
, Probabilistic analysis of underground pipelines subject to combined stresses and corrosion, Engineering structures, pp.988-994, 1997.
, Risk-based reliability evaluation of multi-site damage in pipelines, Computers & Industrial Engineering, vol.35, issue.3-4, pp.595-598, 1998.
DOI : 10.1016/S0360-8352(98)00167-3
, On applications of asymptotic reliability functions to the reliability and risk evaluation of pipelines, International Journal of Pressure Vessels and Piping, vol.75, issue.7, pp.545-558, 1998.
DOI : 10.1016/S0308-0161(98)00047-7
, Reliability of lifetime Network under seismic hazard, Reliability Engineering and System Safety, pp.213-227, 1999.
, Durability of polymeric pipes in contact with domestic products, Construction and Building Materials, 1999.
DOI : 10.1016/S0950-0618(98)00035-X
, A study on the reliability assessment methodology for pipelines with active corrosion defects, International Journal of Pressure Vessels and Piping, vol.79, issue.1, 2002.
DOI : 10.1016/S0308-0161(01)00124-7
, reliability analysis of pipelines carrying H 2 S for risk based inspection of heavy water plants, reliability engineering & system safety, 2004.
, Reliability analysis of pipe whip impacts, Nuclear Engineering and Design, vol.235, issue.17-19, 2005.
DOI : 10.1016/j.nucengdes.2005.05.007
, Datao, estimation of failure probability of oil and gas transmission, pipelines by fuzzy fault tree analysis, Journal of loss prevention in the process industries, 2005.
, Failure probability assessment of wall-thinned nuclear pipes using probabilistic fracture mechanics, Nuclear Engineering and Design, vol.236, issue.4, 2005.
DOI : 10.1016/j.nucengdes.2005.09.008
, Probabilistic fracture assessment of surface cracked pipes using strain-based approach, Engineering Fracture Mechanics, vol.73, issue.11, pp.1491-1509, 2006.
DOI : 10.1016/j.engfracmech.2006.01.026
, Reliability assessment of underground pipelines under the combined effect of active corrosion and residual stress, International Journal of Pressure Vessels and Piping, vol.83, issue.2, pp.107-117, 2006.
DOI : 10.1016/j.ijpvp.2005.11.004
, Soil Engineering, Soil Science, vol.74, issue.2, 1982.
DOI : 10.1097/00010694-195208000-00019
, Catalogue Technique : Tubes polyéthylène (PE) et accessoires
, Reliability assessment method for pressure piping containing circumferential defects based on fuzzy probability, International Journal of Pressure Vessels and Piping, vol.82, issue.9, pp.669-678, 2005.
DOI : 10.1016/j.ijpvp.2005.04.003
, Ninth plastic fuel gas pipe symposium, 1985.
, Statistical theory of reliability and life testing probability models, 1975.
, Optimal replacement policy, 1967.
, Mathematical methods of reliability theory, 1969.
, Models of preventive maintenance, 1977.
, Repairable systems reliability, 1984.
DOI : 10.1002/0471667196.ess1145
, Stochastic system reliability modelling, 1985.
DOI : 10.1142/0164
, Applied stochastic system modelling, 1992.
, Stochastic models in reliability, 1999.
, Marginal cost criteria for preventive replacement of a group of components, European Journal of Operational Research, vol.84, issue.2, pp.467-480, 1995.
DOI : 10.1016/0377-2217(93)E0346-Y
, The marginal cost analysis and its application to repair and replacement policies, European Journal of Operational Research, vol.82, issue.2, pp.214-224, 1995.
DOI : 10.1016/0377-2217(94)00259-F
, A framework for maintenance and replacement of a network structured system, International Journal of Production Economics, vol.69, issue.3, pp.287-296, 2001.
DOI : 10.1016/S0925-5273(00)00028-1
, Replacement and minimal repair policies for a cumulative damage model with maintenance, Computers & Mathematics with Applications, vol.46, issue.7, pp.1111-1118, 2003.
DOI : 10.1016/S0898-1221(03)90126-X
, Avaibility evaluation of oil/ gas production and transportation