B. Yoon, Y. Koh, C. Park, K. , and H. , Generation of Large Pore Channels for Bone Tissue Engineering Using Camphene-Based Freeze Casting, Journal of the American Ceramic Society, vol.84, issue.1, pp.90-1744, 2007.
DOI : 10.1016/j.jbiomech.2004.09.027

Y. Koh, E. Lee, B. Yoon, J. Song, H. Kim et al., Effect of Polystyrene Addition on Freeze Casting of Ceramic/Camphene Slurry for Ultra-High Porosity Ceramics with Aligned Pore Channels, Journal of the American Ceramic Society, vol.87, issue.10, pp.89-3646, 2006.
DOI : 10.1023/A:1008900127475

K. Araki and J. W. Halloran, Room-Temperature Freeze Casting for Ceramics with Nonaqueous Sublimable Vehicles in the Naphthalene-Camphor Eutectic System, Journal of the American Ceramic Society, vol.35, issue.7, pp.2014-2019, 2004.
DOI : 10.1111/j.1151-2916.2004.tb06353.x

S. W. Sofie, Fabrication of Functionally Graded and Aligned Porosity in Thin Ceramic Substrates With the Novel Freeze?Tape-Casting Process, Journal of the American Ceramic Society, vol.87, issue.11, pp.90-2024, 2007.
DOI : 10.1149/1.1579480

K. Araki and J. W. Halloran, New Freeze-Casting Technique for Ceramics with Sublimable Vehicles, Journal of the American Ceramic Society, vol.84, issue.11, pp.1859-1863, 2004.
DOI : 10.1111/j.1151-2916.2004.tb06331.x

S. W. Sofie and F. Dogan, Freeze Casting of Aqueous Alumina Slurries with Glycerol, Journal of the American Ceramic Society, vol.274, issue.12, pp.1459-1464, 2001.
DOI : 10.1111/j.1151-2916.2001.tb00860.x

T. Moritz and H. Richter, Freeze Casting of Ceramic Components using Ice Cores and Ice molds Advances in Science and Technology, pp.391-396, 2006.

H. Schoof, J. Apel, I. Heschel, and G. Rau, Control of pore structure and size in freeze-dried collagen sponges, Journal of Biomedical Materials Research, vol.35, issue.4, pp.352-357, 2001.
DOI : 10.1002/jbm.1028

J. J. Guan, K. L. Fujimoto, M. S. Sacks, and W. R. Wagner, Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications, Biomaterials, vol.26, issue.18, pp.26-3961, 2005.
DOI : 10.1016/j.biomaterials.2004.10.018

S. Deville, E. Saiz, and A. P. Tomsia, Ice-templated porous alumina structures, 25th Annual Conference on Composites. 2001. Cocoa Beach, pp.1965-1974, 2007.
DOI : 10.1016/j.actamat.2006.11.003

B. Yoon, W. Choi, H. Kim, J. Kim, and Y. Koh, Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering, Scripta Materialia, vol.58, issue.7, pp.58-537, 2008.
DOI : 10.1016/j.scriptamat.2007.11.006

B. Yoon, E. Lee, H. Kim, and Y. Koh, Highly Aligned Porous Silicon Carbide Ceramics by Freezing Polycarbosilane/Camphene Solution, Journal of the American Ceramic Society, vol.84, issue.2, pp.90-1753, 2007.
DOI : 10.1023/A:1017994810727
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.625.8886

J. Tang, Y. Chen, H. Wang, H. Liu, F. et al., Preparation of oriented porous silicon carbide bodies by freeze-casting process, Key Engineering Materials, pp.280-283, 2005.

S. Mukai, H. Nishihara, and H. Tamon, Porous microfibers and microhoneycombs synthesized by ice templating Catalysis Surveys from Asia, pp.161-171, 2006.

S. Roy and A. Wanner, Metal/ceramic composites from freeze-cast ceramic preforms: Domain structure and elastic properties, Composites Science and Technology, vol.68, issue.5, pp.68-1136, 2008.
DOI : 10.1016/j.compscitech.2007.06.013
URL : https://hal.archives-ouvertes.fr/hal-00534152

W. Li, K. Lu, and J. Y. Walz, Formation, Structure and Properties of Freeze-Cast Kaolinite-Silica Nanocomposites, Journal of the American Ceramic Society, vol.31, issue.[6], 2010.
DOI : 10.1111/j.1551-2916.2010.04212.x

G. Liu, D. Zhang, C. Meggs, and T. W. Button, Porous Al2O3???ZrO2 composites fabricated by an ice template method, Scripta Materialia, vol.62, issue.7, pp.62-466, 2010.
DOI : 10.1016/j.scriptamat.2009.12.018

Y. Huang, S. Onyeri, M. Siewe, A. Moshfeghian, S. V. Madihally et al., In vitro characterization of chitosan-gelatin scaffolds for tissue engineering A Novel Production Method for Porous Sound-Absorbing Ceramic Material for High-Temperature Applications, Biomaterials International Journal of Applied Ceramic Technology, vol.26, issue.20, pp.7616-7627, 2005.

S. Deville, E. Saiz, and A. Tomsia, Freeze casting of hydroxyapatite scaffolds for bone tissue engineering, Biomaterials, vol.27, issue.32, pp.5480-5489, 2006.
DOI : 10.1016/j.biomaterials.2006.06.028

A. Szepes, J. Ulrich, Z. Farkas, J. Kovács, and P. Szabó-révész, Freeze-casting technique in the development of solid drug delivery systems, Chemical Engineering and Processing: Process Intensification, vol.46, issue.3, pp.230-238, 2007.
DOI : 10.1016/j.cep.2006.06.004

T. L. Cable, J. A. Setlock, S. C. Farmer, and A. J. Eckel, Regenerative Performance of the NASA Symmetrical Solid Oxide Fuel Cell Design, International Journal of Applied Ceramic Technology, vol.155, issue.[11], pp.1-12, 2010.
DOI : 10.1111/j.1744-7402.2009.02477.x

T. L. Cable and S. W. Sofie, A symmetrical, planar SOFC design for NASA's high specific power density requirements, Journal of Power Sources, vol.174, issue.1, pp.221-227, 2007.
DOI : 10.1016/j.jpowsour.2007.08.110

S. Lee, S. Jun, H. Kim, and Y. Koh, Fabrication of Porous PZT?PZN Piezoelectric Ceramics With High Hydrostatic Figure of Merits Using Camphene-Based Freeze Casting, Journal of the American Ceramic Society, vol.44, issue.3, pp.90-2807, 2007.
DOI : 10.1016/S0955-2219(01)00426-5

J. Moon, H. J. Hwang, M. Awano, K. Maeda, and S. Kanzaki, Preparation of dense thin-film solid electrolyte on novel porous structure with parallel pore channel, Journal of the Ceramic Society of Japan, issue.5, pp.10-479, 2002.

Q. Fu, M. N. Rahaman, F. Dogan, and B. S. Bal, Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure, Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol.324, issue.1, pp.86-125, 2008.
DOI : 10.1002/jbm.b.30997

P. Kisa, P. Fisher, A. Olszewski, I. Nettleship, and N. G. Eror, Synthesis of Porous Ceramics Through Directional Solidification and Freeze-Drying, Materials Research Society Symposium, pp.415-419, 2003.
DOI : 10.1016/0022-0248(90)90514-L

Z. Deng, H. R. Fernandes, J. M. Ventura, S. Kannan, and J. M. Ferreira, Nano-TiO 2 -Coated Unidirectional Porous Glass Structure Prepared by Freeze Drying and Solution Infiltration, Journal of the American Ceramic Society, issue.4, pp.90-1265, 2007.
DOI : 10.1111/j.1551-2916.2007.01602.x

T. Moritz, H. Richter, T. Fukasawa, M. Ando, T. Ohji et al., Ice-mould freeze casting of porous ceramic components Synthesis of porous ceramics with complex pore structure by freeze-dry processing, Journal of the European Ceramic Society Journal of the American Ceramic Society, vol.31, issue.32, pp.27-4595, 2001.

S. Deville, P. Miranda, E. Saiz, and A. P. Tomsia, Fabrication of Porous Hydroxyapatite Scaffolds, Manufacturing Science and Engineering, Parts A and B, 2006.
DOI : 10.1115/MSEC2006-21048

K. H. Zuo, Y. Zeng, and D. Jiang, Properties of Microstructure-Controllable Porous Yttria-Stabilized Ziroconia Ceramics Fabricated by Freeze Casting, International Journal of Applied Ceramic Technology, vol.84, issue.1, pp.198-203, 2008.
DOI : 10.1007/BF00367582

S. Deville, Freezing as a Path to Build Complex Composites, Science, vol.311, issue.5760, pp.515-518, 2006.
DOI : 10.1126/science.1120937

E. Lee, Y. Koh, B. Yoon, H. Kim, K. et al., Highly porous hydroxyapatite bioceramics with interconnected pore channels using camphene-based freeze casting, Materials Letters, vol.61, issue.11-12, pp.6111-6123, 2007.
DOI : 10.1016/j.matlet.2006.08.065

Q. Fu, M. N. Rahaman, F. Dogan, and B. S. Bal, Freeze casting of porous hydroxyapatite scaffolds

L. Hu, C. Wang, Y. Huang, C. Sun, S. Lu et al., Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures, Journal of the European Ceramic Society, vol.30, issue.16, pp.30-3389, 2010.
DOI : 10.1016/j.jeurceramsoc.2010.07.032

K. H. Zuo, Y. Zeng, and D. Jiang, Effect of polyvinyl alcohol additive on the pore structure and morphology of the freeze-cast hydroxyapatite ceramics, Materials Science and Engineering: C, vol.30, issue.2, pp.30-283, 2010.
DOI : 10.1016/j.msec.2009.11.003

M. Bettge, H. Niculescu, and P. J. Gielisse, Engineered porous ceramics using a directional freezedrying process, 28th International Spring Seminar on Electronics Technology : Meeting the Challenges of Electronics Technology Process, pp.28-34, 2005.

L. Pauling, The Structure and Entropy of Ice and of Other Crystals with Some Randomness of Atomic Arrangement, Journal of the American Chemical Society, vol.57, issue.12, pp.2680-2684, 1935.
DOI : 10.1021/ja01315a102

M. Akyurt, G. Zaki, B. S. Habeebullah, I. T. Norton, and J. B. Ubbink, Freezing phenomena in ice-water systems. Energy Conversion and Management Modern Biopolymer Science. 2009. 627. 43. Veintemillas-Verdaguer, S., Chemical aspects of the effect of impurities in crystal growth, Progress in Crystal Growth and Characterization of Materials, pp.43-1773, 1996.

N. Kallay and D. Cakara, Reversible Charging of the Ice???Water Interface, Journal of Colloid and Interface Science, vol.232, issue.1, pp.81-85, 2000.
DOI : 10.1006/jcis.2000.7193

N. Kallay, A. Cop, E. Chibowski, and L. Holysz, Reversible charging of the ice???water interface, Ice/Water Interface: Zeta Potential, Point of Zero Charge, and Hydrophobicity, pp.89-96, 1999.
DOI : 10.1016/S0021-9797(02)00179-0

C. Girardet and C. Toubin, Molecular atmospheric pollutant adsorption on ice: a theoretical survey, Surface Science Reports, vol.44, issue.7-8, pp.159-238, 2001.
DOI : 10.1016/S0167-5729(01)00016-4

A. G. Taillandier and P. Bennema, Evolution de la surface spécifique de la neige Etudes expérimentales et de terrain, paramétrisation., in Laboratoire de Glaciologie et Géophysique de l'Environnement Characterization of additive performance on crystallization: Habit modification, Journal of Crystal Growth, issue.2, pp.99-100, 1990.

K. Funakoshi, T. Inada, T. Tomita, H. Kawahara, and T. Miyata, Thermal hysteresis induced by ammonium polyacrylate as antifreeze polymer, Journal of Crystal Growth, vol.310, issue.14, pp.310-3342, 2008.
DOI : 10.1016/j.jcrysgro.2008.04.011

W. Kurz, Fundamentals of solidification, pp.21-44, 1989.

A. Van-hook, Crystallization, Theory and Practice. 1961, Reinhold publishing corporation, pp.92-153

R. A. Lambert, R. H. Rangel, and R. F. Sekerka, Linear stability analysis of the solidification of a supercooled liquid in a half-space, Morphological stability, pp.45-4577, 1968.
DOI : 10.1016/S0017-9310(02)00166-7

S. Deville, Freeze-Casting of Porous Ceramics: A Review of Current Achievements and Issues, Advanced Engineering Materials, vol.554, issue.283, pp.155-169, 2008.
DOI : 10.1002/adem.200700270

J. A. Sekhar, R. Trivedi, and W. Pfeiler, Solidification microstructure evolution in the presence of inert particles, 973. 58. kurz, W., fundamentals of solidification, pp.9-21, 1989.
DOI : 10.1016/0921-5093(91)90800-3

W. W. Mullins and R. F. Sekerka, Stability of a Planar Interface During Solidification of a Dilute Binary Alloy, Journal of Applied Physics, vol.35, issue.2, pp.444-451, 1964.
DOI : 10.1063/1.1713333

B. Dutta and M. K. Surappa, Directional dendritic solidification of a composite slurry: Part II. Particle distribution, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, pp.1329-1339, 1998.
DOI : 10.1007/s11661-998-0259-y

R. Asthana and S. N. Tewari, The engulfment of foreign particles by a freezing interface, Journal of Materials Science, vol.64, issue.3, pp.5414-5425, 1993.
DOI : 10.1007/BF00367810

A. W. Neumann, S. N. Omenyi, V. Oss, and C. J. , Attraction and repulsion of solid particles by solidification fronts. III. van der Waals interactions, Journal of Physical Chemistry, issue.8, pp.86-1267, 1982.

M. A. Azouni, P. Casses, and B. Sergiani, Capture or repulsion of treated nylon particles by an icewater interface, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.122, pp.1-3, 1997.

S. S. Peppin, J. A. Elliot, and M. G. Worster, Solidification of colloidal suspensions, Journal of Fluid Mechanics, vol.554, issue.-1, pp.147-166, 2006.
DOI : 10.1017/S0022112006009268

A. W. Rempel and M. G. Worster, Particle trapping at an advancing solidification front with interfacial-curvature effects, Journal of Crystal Growth, vol.223, issue.3, pp.420-432, 2001.
DOI : 10.1016/S0022-0248(01)00595-4

N. O. Shanti, K. Araki, and J. W. Halloran, Particle Redistribution During Dendritic Solidification of Particle Suspensions, Journal of the American Ceramic Society, vol.270, issue.9, pp.2444-2447, 2006.
DOI : 10.1023/A:1020718225164

J. J. Guo and J. A. Lewis, Aggregation Effects on the Compressive Flow Properties and Drying Behavior of Colloidal Silica Suspensions, Journal of the American Ceramic Society, vol.389, issue.7, pp.2345-2358, 1999.
DOI : 10.1111/j.1151-2916.1999.tb02090.x

N. F. Carnahan and K. Starling, Equation of State for Nonattracting Rigid Spheres, The Journal of Chemical Physics, vol.51, issue.2, pp.635-636, 1969.
DOI : 10.1063/1.1672048

S. S. Peppin, J. A. Elliot, and M. G. Worster, Solidification of colloidal suspensions, Journal of Fluid Mechanics, vol.554, issue.-1, pp.147-166, 2006.
DOI : 10.1017/S0022112006009268

D. Liu, Particle packing and rheological property of highly-concentrated ceramic suspensions: ?m determination and viscosity prediction, Journal of Materials Science, issue.21, pp.35-5503, 2000.

A. W. Rempel and M. G. Worster, The interaction between a particle and an advancing solidification front, Journal of Crystal Growth, vol.205, issue.3, pp.427-440, 1999.
DOI : 10.1016/S0022-0248(99)00290-0

G. Lipp, C. Koerber, and G. Rau, Critical growth rates of advancing ice-water interfaces for particle encapsulation, Journal of Crystal Growth, vol.99, issue.1-4, pp.206-210, 1990.
DOI : 10.1016/0022-0248(90)90514-L

G. Lipp and C. Korber, On the engulfment of spherical particles by a moving ice-liquid interface, Journal of Crystal Growth, vol.130, issue.3-4, pp.475-489, 1993.
DOI : 10.1016/0022-0248(93)90536-6

S. S. Peppin, J. S. Wettlaufer, and M. G. Worster, Experimental Verification of Morphological Instability in Freezing Aqueous Colloidal Suspensions, Physical Review Letters, vol.100, issue.23, pp.238301-238304, 2008.
DOI : 10.1103/PhysRevLett.100.238301

G. Liu, D. Zhang, C. Meggs, and T. W. Button, Porous Al2O3???ZrO2 composites fabricated by an ice template method, Scripta Materialia, vol.62, issue.7, pp.466-468
DOI : 10.1016/j.scriptamat.2009.12.018

W. Kurz, Fundamentals of solidification, D Architectural control of freeze-cast ceramics through additives and templating, Munch, E. J. Am. Ceram. Soc, vol.78, issue.92, pp.62-92, 1989.

H. F. Zhang, Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles, Nature Materials, vol.25, issue.10, pp.787-793, 2005.
DOI : 10.1021/cg025591e

F. Ye, J. Zhang, H. Zhang, and L. Liu, Pore structure and mechanical properties in freeze cast porous Si3N4 composites using polyacrylamide as an addition agent, Journal of Alloys and Compounds, vol.506, issue.1, pp.423-427
DOI : 10.1016/j.jallcom.2010.07.020

Y. Zhang, L. Hu, J. Han, and Z. Jiang, Freeze casting of aqueous alumina slurries with glycerol for porous ceramics, Ceramics International, vol.36, issue.2, pp.617-621
DOI : 10.1016/j.ceramint.2009.09.036

J. Zou, Y. Zhang, L. , and R. , Effect of Suspension State on the Pore Structure of Freeze-Cast Ceramics, International Journal of Applied Ceramic Technology, vol.89, issue.[12], pp.p. no-no, 2009.
DOI : 10.1111/j.1744-7402.2009.02458.x

J. Jolivet, De la solution à l'oxyde EDP Sciences ed. 1994, Paris. 387. 86. Salmang, H., Ceramics, Physical and chemical fundamentals, 1961.

J. Davies and J. G. Binner, The role of ammonium polyacrylate in dispersing concentrated alumina suspensions, Journal of the European Ceramic Society, vol.20, issue.10, pp.20-1539, 2000.
DOI : 10.1016/S0955-2219(00)00012-1

K. Lu, Theoretical analysis of colloidal interaction energy in nanoparticle suspensions, Ceramics International, vol.34, issue.6, pp.1353-1360, 2008.
DOI : 10.1016/j.ceramint.2007.02.016

W. J. Wei, S. J. Lu, Y. , and B. , Characterization of submicron alumina dispersions with poly(methacrylic acid) polyelectrolyte, Journal of the European Ceramic Society, vol.15, issue.2, pp.155-164, 1995.
DOI : 10.1016/0955-2219(95)93061-7

D. J. Kim, H. Kim, L. , J. K. Lyckfeldt, O. Carlström et al., Dependence of the rheological behaviour of electrostatically stabilized alumina slurries on pH and solid loading Dispersion mechanisms in aqueous alumina suspensions at high solids loadings, Journal of Materials Science Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.33, issue.274, pp.2931-29351, 1998.

J. Tsubaki, M. Kato, M. Miyazawa, T. Kuma, and H. Mori, The effects of the concentration of a polymer dispersant on apparent viscosity and sedimentation behavior of dense slurries, Chemical Engineering Science, vol.56, issue.9, pp.56-3021, 2001.
DOI : 10.1016/S0009-2509(00)00485-1

C. Poncet-legrand, F. Lafuma, and R. Audebert, Rheological behaviour of colloidal dispersions of hydrophobic particles stabilised in water by amphiphilic polyelectrolytes, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.152, issue.3, pp.251-261, 1999.
DOI : 10.1016/S0927-7757(98)00510-X

R. J. Pugh and L. Bergström, Surface and colloid chemistry in advanced ceramics processing, pp.103-104, 1994.

S. Vallar, D. Houivet, J. Fallah, D. Kervadec, and J. M. Haussonne, Oxide slurries stability and powders dispersion: optimization with zeta potential and rheological measurements, Journal of the European Ceramic Society, vol.19, issue.6-7, pp.6-7, 1999.
DOI : 10.1016/S0955-2219(98)00365-3

H. M. Wyss, M. Hütter, M. Müller, L. P. Meier, and L. J. Gauckler, Quantification of Microstructures in Stable and Gelated Suspensions from Cryo-SEM, Journal of Colloid and Interface Science, vol.248, issue.2, pp.248-340, 2002.
DOI : 10.1006/jcis.2001.8220

H. M. Wyss, E. Tervoort, L. P. Meier, M. Müller, and L. J. Gauckler, Relation between microstructure and mechanical behavior of concentrated silica gels, Journal of Colloid and Interface Science, vol.273, issue.2, pp.455-462, 2004.
DOI : 10.1016/j.jcis.2004.01.065

H. Luo, L. E. Scriven, F. , and L. F. , Cryo-SEM studies of latex/ceramic nanoparticle coating microstructure development, Journal of Colloid and Interface Science, vol.316, issue.2, pp.316-500, 2007.
DOI : 10.1016/j.jcis.2007.07.047

A. Zingg, L. Holzer, A. Kaech, F. Winnefeld, J. Pakusch et al., The microstructure of dispersed and non-dispersed fresh cement pastes ??? New insight by cryo-microscopy, Cement and Concrete Research, vol.38, issue.4, pp.522-529, 2008.
DOI : 10.1016/j.cemconres.2007.11.007

A. Srivastava, A. R. Menon, J. R. Bellare, and U. H. Riehle, Electron Microscopy of Modified Aluminum Alkoxide Microstructures on Freeze???Drying, 4th European Reg. Conf. Electron Microscopy. Cryotechniques in biological electron Microscopy, pp.521-524, 1968.
DOI : 10.1006/jcis.1997.4946

D. Rolf and L. A. Staehelin, High-pressure freezing for the preservation of biological structure: Theory and practice, Journal of Electron Microscopy Technique, vol.13, issue.3, pp.165-174, 1989.

R. Dahl, A. Staehelin, and L. , High-pressure freezing for the preservation of biological structure: Theory and practice, Journal of Electron Microscopy Technique, vol.30, issue.3, pp.165-174, 1988.
DOI : 10.1002/jemt.1060130305

M. Takahashi, M. Oya, and M. Fuji, Transparent observation of particle dispersion in alumina slurry using <I>in situ</I> solidification, Advanced Powder Technology, vol.15, issue.1, pp.97-107, 2004.
DOI : 10.1163/15685520460740098

W. R. Bowen and A. Mongruel, Calculation of the collective diffusion coefficient of electrostatically stabilised colloidal particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, pp.161-172, 1998.

B. P. Singh, S. Bhattacharjee, L. Besra, and D. K. Sengupta, Evaluation of dispersibility of aqueous alumina suspension in presence of Darvan C, Ceramics International, vol.30, issue.6, pp.30-939, 2004.
DOI : 10.1016/j.ceramint.2003.11.007

B. P. Singh, R. Menchavez, C. Takai, M. Fuji, and M. Takahashi, Stability of dispersions of colloidal alumina particles in aqueous suspensions, Journal of Colloid and Interface Science, vol.291, issue.1, pp.181-186, 2005.
DOI : 10.1016/j.jcis.2005.04.091

M. Georgelin and A. Pocheau, Characterization of cell tip curvature in directional solidification, Journal of Crystal Growth, vol.268, issue.1-2, pp.272-283, 2004.
DOI : 10.1016/j.jcrysgro.2004.04.043
URL : https://hal.archives-ouvertes.fr/hal-00082241

A. Lasalle, C. Guizard, S. Deville, F. Rossignol, C. et al., Investigating the Dispersion State of Alumina Suspensions: Contribution of Cryo-Field-Emission Gun Scanning Electron Microscopy Characterizations, Journal of the American Ceramic Society, vol.72, issue.[20], pp.94-244, 2010.
DOI : 10.1111/j.1551-2916.2010.04034.x

O. Mishima and H. E. Stanley, The relationship between liquid, supercooled and glassy water, Nature, vol.396, pp.329-335, 1998.

D. Studer, M. Michel, M. Wohlwend, E. B. Hunziker, and M. D. Buschmann, Vitrification of articular cartilage by high-pressure freezing, Journal of Microscopy, vol.161, issue.Suppl. 3, pp.321-332, 1995.
DOI : 10.1111/j.1365-2818.1995.tb03648.x

G. E. Sosinsky, J. Crum, Y. Z. Jones, J. Lanman, B. Smarr et al., The combination of chemical fixation procedures with high pressure freezing and freeze substitution preserves highly labile tissue ultrastructure for electron tomography applications, Journal of Structural Biology, vol.161, issue.3, pp.161-359, 2008.
DOI : 10.1016/j.jsb.2007.09.002

C. Korber, G. Rau, M. D. Cosman, and E. G. Cravalho, Interaction of particles and a moving ice-liquid interface, Journal of Crystal Growth, vol.72, issue.3, pp.649-662, 1985.
DOI : 10.1016/0022-0248(85)90217-9

P. C. Hidber, T. J. Graule, and L. J. Gauckler, Citric Acid-A Dispersant for Aqueous Alumina Suspensions, Journal of the American Ceramic Society, vol.3, issue.2, pp.79-1857, 1996.
DOI : 10.1111/j.1151-2916.1994.tb07248.x

R. W. Style and S. S. Peppin, Crust formation in drying colloidal suspensions, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.2, issue.1, pp.467-174, 2011.
DOI : 10.1016/j.jcis.2003.12.030

M. Rami, M. Meireles, B. Cabane, and C. Guizard, Colloidal Stability for Concentrated Zirconia Aqueous Suspensions, Journal of the American Ceramic Society, vol.87, issue.[2], pp.50-56, 2009.
DOI : 10.1111/j.1551-2916.2008.02681.x
URL : https://hal.archives-ouvertes.fr/hal-00903952

B. Abecassis, Boosting migration of large particles by solute contrasts, Nature Materials, vol.97, issue.10, pp.785-789, 2008.
DOI : 10.1038/nmat2254

T. Inada and P. R. Modak, Growth control of ice crystals by poly(vinyl alcohol) and antifreeze protein in ice slurries, Chemical Engineering Science, vol.61, issue.10, pp.61-3149, 2006.
DOI : 10.1016/j.ces.2005.12.005

S. Deville, E. Maire, A. Lasalle, A. Bogner, C. Gauthier et al., In Situ X-Ray Radiography and Tomography Observations of the Solidification of Aqueous Alumina Particle Suspensions-Part I: Initial Instants, Journal of the American Ceramic Society, vol.92, issue.11, pp.92-2489, 2009.
DOI : 10.1111/j.1551-2916.2009.03163.x
URL : https://hal.archives-ouvertes.fr/hal-00903925

S. Deville, E. Maire, A. Lasalle, A. Bogner, C. Gauthier et al., Influence of Particle Size on Ice Nucleation and Growth During the Ice-Templating Process, Journal of the American Ceramic Society, vol.327, issue.[5966], pp.2507-2510
DOI : 10.1111/j.1551-2916.2010.03840.x
URL : https://hal.archives-ouvertes.fr/hal-00639037

S. Deville, E. Maire, A. Lasalle, A. Bogner, C. Gauthier et al., In situ X-Ray Radiography and Tomography Observations of the Solidification of Aqueous Alumina Particles Suspensions. Part II: Steady State, Journal of the American Ceramic Society, issue.11, pp.92-2497, 2009.

S. Deville, E. Maire, G. Bernard-granger, A. Lasalle, A. Bogner et al., Metastable and unstable cellular solidification of colloidal suspensions, Nature Materials, vol.35, issue.12, pp.966-972, 2009.
DOI : 10.1038/nmat2571
URL : https://hal.archives-ouvertes.fr/hal-00639455

A. Bareggi, E. Maire, A. Lasalle, and S. Deville, Dynamics of the freezing front during the solidification of a colloidal alumina aqueous suspensions: in situ X-ray radiography, tomography and modeling, Journal of the American Ceramic Society, 2011.

M. E. Glicksman, Diffusion in solids. Field Theory, Solid-State Principles, and Applications, 2000.

M. G. Worster and J. S. Wettlaufer, Natural Convection, Solute Trapping, and Channel Formation during Solidification of Saltwater, The Journal of Physical Chemistry B, vol.101, issue.32, pp.6132-6136, 1997.
DOI : 10.1021/jp9632448

J. K. Torrance, T. Elliot, R. Martin, and R. J. Heck, X-ray computed tomography of frozen soil. Cold Regions Science and Technology, pp.75-82, 2008.

K. Watanabe, Relationship between growth rate and supercooling in the formation of ice lenses in a glass powder, Journal of Crystal Growth, vol.237, issue.239, pp.237-239, 2002.
DOI : 10.1016/S0022-0248(01)02271-0

K. Watanabe and M. Mizoguchi, Ice configuration near a growing ice lens in a freezing porous medium consisting of micro glass particles, Journal of Crystal Growth, vol.213, issue.1-2, pp.135-140, 2000.
DOI : 10.1016/S0022-0248(00)00353-5

L. Bronfenbrener and R. Bronfenbrener, Modeling frost heave in freezing soils. Cold Regions Science and Technology, pp.43-64

L. Bronfenbrener, The modelling of the freezing process in fine-grained porous media: Application to the frost heave estimation. Cold Regions Science and Technology, pp.120-134, 2009.

F. F. Krause, Genesis and geometry of the Meiklejohn Peak lime mud-mound, Bare Mountain Quadrangle, Nevada, USA: Ordovician limestone with submarine frost heave structures???a possible response to gas clathrate hydrate evolution, Sedimentary Geology, vol.145, issue.3-4, pp.145-148, 2001.
DOI : 10.1016/S0037-0738(01)00148-8

C. Pekor, B. Groth, and I. Nettleship, The Effect of Polyvinyl Alcohol on the Microstructure and Permeability of Freeze-Cast Alumina, Journal of the American Ceramic Society, vol.93, issue.1, pp.115-120
DOI : 10.1111/j.1551-2916.2009.03398.x

G. Bernard-granger, C. Guizard, and A. Addad, Sintering of an ultra pure ??-alumina powder: I. Densification, grain growth and sintering path, Journal of Materials Science, vol.79, issue.8, pp.42-6316, 2007.
DOI : 10.1007/s10853-006-1206-1

G. Bernard-granger, N. Monchalin, and C. Guizard, Sintering of ceramic powders: Determination of the densification and grain growth mechanisms from the ???grain size/relative density??? trajectory, Scripta Materialia, vol.57, issue.2, pp.137-140, 2007.
DOI : 10.1016/j.scriptamat.2007.03.030

G. Bernard-granger and C. Guizard, New relationships between relative density and grain size during solid-state sintering of ceramic powders, Acta Materialia, vol.56, issue.20, pp.56-6273, 2008.
DOI : 10.1016/j.actamat.2008.08.054

G. Bernard-granger and C. Guizard, Apparent Activation Energy for the Densification of a Commercially Available Granulated Zirconia Powder, Journal of the American Ceramic Society, vol.2, issue.2, pp.1246-1250, 2007.
DOI : 10.1111/j.1151-2916.1996.tb08097.x

N. Benameur, Elaboration et caractérisations d'un spinelle polycristallin à grains fins transparent dans le visible et l'infrarouge, 2009.

L. Joly-pottuz, A. Bogner, A. Lasalle, A. Malchère, G. Thollet et al., Improvements for imaging ceramics sintering in ESEM, Journal of Microscopy, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00639510

E. Maire, V. Carmona, J. Courbon, L. , and W. , Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests, Acta Materialia, vol.55, issue.20, pp.55-6806, 2007.
DOI : 10.1016/j.actamat.2007.08.043
URL : https://hal.archives-ouvertes.fr/hal-00434199

S. Terzi, L. Salvo, M. Suéry, N. Limodin, J. Adrien et al., In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys, Scripta Materialia, vol.61, issue.5, pp.61-449, 2009.
DOI : 10.1016/j.scriptamat.2009.04.041

G. Bernard-granger, C. Guizard, A. Addad, S. Nacre-@bullet-deville, E. Maire et al., Influence of Co-Doping on the Sintering Path and on the Optical Properties of a Submicronic Alumina Material Publications issues du projet NACRE -145 - Publications issues du projet In Situ X-Ray Radiography and Tomography Observations of the Solidification of Aqueous Alumina Particle Suspensions; Part I: Initial Instants, Journal of the American Ceramic Society Journal of the American Ceramic Society, issue.511, pp.91-1703, 2008.

S. @bullet-deville, E. Maire, A. Lasalle, A. Bogner, C. Gauthier et al., In situ X-Ray Radiography and Tomography Observations of the Solidification of Aqueous Alumina Particles Suspensions. Part II: Steady State, Journal of the American Ceramic Society, issue.11, pp.92-2497, 2009.

S. @bullet-deville, E. Maire, A. Lasalle, A. Bogner, C. Gauthier et al., Influence of Particle Size on Ice Nucleation and Growth During the Ice-Templating Process, Journal of the American Ceramic Society, vol.327, issue.[5966], pp.2507-2510
DOI : 10.1111/j.1551-2916.2010.03840.x

S. @bullet-deville, E. Maire, G. Bernard-granger, A. Lasalle, A. Bogner et al., Metastable and unstable cellular solidification of colloidal suspensions, Nature Materials, issue.812, pp.966-972, 2009.

@. Lasalle, A. Guizard, C. Deville, S. Rossignol, F. et al., Investigating the Dispersion State of Alumina Suspensions: Contribution of Cryo-Field-Emission Gun Scanning Electron Microscopy Characterizations, Journal of the American Ceramic Society, vol.72, issue.[20], pp.94-244, 2010.
DOI : 10.1111/j.1551-2916.2010.04034.x

@. Joly-pottuz, L. Bogner, A. Lasalle, A. Malchère, A. Thollet et al., Improvements for imaging ceramics sintering in situ in ESEM Dynamics of the freezing front during the solidification of a colloidal alumina aqueous suspensions: in situ X-ray radiography, tomography and modeling, Journal of Microscopy Journal of the American Ceramic Society, 2011.