J. P. Ahrens, Irregular wave runup on smooth slopes, CETA No. 81-17, p.29, 1981.

J. P. Ahrens, M. S. Et, and . Heimbaugh, Approximate upper limite of irregular wave runup on riprap, p.35, 1988.

J. P. Ahrens, M. S. Et, and . Heimbaugh, Irregular Wave Runup on Riprap Revetments, Journal of Waterway, Port, Coastal, and Ocean Engineering, vol.114, issue.4, pp.524-530, 1988.
DOI : 10.1061/(ASCE)0733-950X(1988)114:4(524)

G. B. Airy, On tides and waves, In Encyclopedia Metropolitan, pp.241-396, 1845.

N. Allsop, A. Bradbury, A. Poole, T. Dibb, and E. D. Hughes, Rock durability in a marine environment, Hydraulics Research, p.29, 1985.

N. W. Allsop, Reflection Performance of Rock Armoured Slopes in Random Waves, Coastal Engineering 1990, pp.1460-1472, 1990.
DOI : 10.1061/9780872627765.111

R. G. Bea, T. Xu, J. Stear, and E. R. Ramos, Wave foces on decks of offshore platforms, J. of Waterway, Port, Coastal and Ocean Engineering, vol.125, p.201, 1999.

M. Beno??tbeno??t, Réflexion de houle en incidence oblique sur une diguè a talus Tome 2 : comparaison de différentes méthodes de mesure et d'analyse de réflexion.Deuxì eme partie : examen de l'apport des méthodes d'analyse de houle multidirectionnelle, p.164, 1994.

M. Beno??tbeno??t, C. Et, and . Teissen, Laboratory study of breakwater reflection-effect of wabe obliquity, wave steepness and mound slope, International Symposium : Waves-Physical and Numerical Modelling, pp.1021-1030, 1994.

P. Bibliographie-besley, Overtopping of seawalls : design and assesment manual, Environment Agency, p.39, 1999.

R. Briganti, J. W. Van-der-meer, M. Buccino, and E. M. Calabrese, Wave Transmission Behind Low-Crested Structures, Coastal Structures 2003, pp.26-30, 2003.
DOI : 10.1061/40733(147)48

L. Broderick, J. P. Et, and . Ahrens, Rip-rap stability scale effects, p.59, 1982.

T. Bruce, J. W. Van-der-meer, L. Franco, and J. M. Pearson, Overtopping performance of different armour units for rubble mound breakwaters, Coastal Engineering, vol.56, issue.2, pp.166-179, 2009.
DOI : 10.1016/j.coastaleng.2008.03.015

B. S. Bs-6349, Maritime structures, part 7 : Guide to the design and construction of breakwaters, British Standard Institution, p.24, 1991.

H. F. Burcharth, S. A. Et, and . Hughes, Coastal Engineering Manual, Fundamentals of Design, Part VI, to be published by Coastal Engineering Research Center, Waterways Experiment Station, p.225, 2000.

H. F. Burcharth, Z. Liu, and E. P. Troch, Scaling of cire material in rubble mound breakwater model tests, Proc. 5 th Int. Conf. on Coastal and Port Engineering in Developing Countries (COPEDEC V), Cape Town, p.229, 1999.

C. Chevalier, Action de la houle sur un cylindre immergé en zonecôtì ere, Thèse de doctorat, p.80, 2000.

C. Cur, Manual on the use of rock in coastal and shoreline engineering, CUR/CIRIA Report, vol.15483, issue.24, p.41, 1991.

I. F. Daemen, Wave transmission at low-crested breakwaters, p.41, 1991.

Y. B. Dai, A. M. Et, and . Kamel, Scale effect tests for rubble mound breakwaters, p.165, 1969.

K. Angremond, J. W. Van-der-meer, R. G. De, and J. , Wave transmission at low-crested structures, Proc. 25 th Int, pp.2418-2427, 1996.

M. A. Davidson, P. A. Bird, G. N. Bullock, and D. A. Huntley, Wave reflection : Field measurements, analysis and theoretical developments, Proc. of Coastal Dynamics '94, pp.642-655, 1994.

J. De-rouck, P. Troch, B. Van-de-walle, M. R. Van-gent, L. Van-damme et al., Wave run-up on sloping coastal structures: prototype measurements versus scale model tests, 2001.
DOI : 10.1680/bcsac.30428.0020

R. De-rover, Breakwater stability with damaged single layer armour units, Master's thesis, Faculty of Cvil Engineering and Geoscience, p.119, 2007.

H. K. Endresen, A. Et, and . Tørum, Wave forces on a pipeline through the surf zone, Coastal Engineering, vol.18, issue.3-4, pp.267-281, 0199.
DOI : 10.1016/0378-3839(92)90023-N

O. Faltinsen, A. Kjarlando, E. T. Nottveit, and . Vinje, Water impact loads and dynamic response of horizontal circular cylinders in offshore structures, Offshore Technology Conf, Proc. 209, 1977.

L. Franco, M. De-gerloni, and E. J. Van-der-meer, Wave Overtopping on Vertical and Composite Breakwaters, Coastal Engineering 1994, pp.23-28, 1994.
DOI : 10.1061/9780784400890.076

Y. Goda, Y. Et, and . Suzuki, Estimation of Incident and Reflected Waves in Random Wave Experiments, Coastal Engineering 1976, pp.828-845, 1976.
DOI : 10.1061/9780872620834.048

V. Hariprasad, S. Neelamani, and E. R. Sundaravadivelu, Slammin-horizontal circular members in intertidal zone, Hydrodynamics VI-Theory and Applications, pp.547-553, 2005.

M. Hattori, E. Yauchi, and Y. Kasahara, Hydraulic stability of armor units in single cover layer, Proc. Coastal Structures, pp.169-174, 1999.

M. Hebsgaard, P. Sloth, and E. J. Juhl, Wave Overtopping of Rubble Mound Breakwaters, Coastal Engineering 1998, pp.22-26, 1998.
DOI : 10.1061/9780784404119.167

T. S. Hedges, M. T. Et, and . Reis, RANDOM WAVE OVERTOPPING OF SIMPLE SEA WALLS: A NEW REGRESSION MODEL., Proceedings ICE : Water, Maritime and Energy, pp.1-10, 1998.
DOI : 10.1680/iwtme.1998.30223

R. Hudson, Design of quarry-stone layers for rubble mound breakwaters, Waterway Experiment Station Report, vol.21, issue.170, pp.55-185, 1958.

R. Y. Hudson, Laboratory investigation of rubble mound breakwaters, J. of Waterways and Harbor Division 85, pp.134-221, 1959.

S. A. Hughes, Physical Modeling Considerations for Coastal Structures, Advances in Coastal Structure Design, pp.97-115, 2003.
DOI : 10.1061/9780784406892.ch05

R. C. Iribarren, Una formula para el calculo de diques de esallero, p.55, 1938.

R. C. Iribarren, Formule pour le calcul des diques en enrochements naturels ou elements artificiels, 21 th International Navigation Congress, Section II-1, 1965.

M. Isaacson, Measurement of Regular Wave Reflection, Journal of Waterway, Port, Coastal, and Ocean Engineering, vol.117, issue.6, pp.553-569, 1991.
DOI : 10.1061/(ASCE)0733-950X(1991)117:6(553)

R. A. Jackson, Design of cover layers for rubble mound breakwaters subjected to nonbreaking waves, Research Report, vol.164, issue.165, p.166, 1968.

M. N. Kaplan and P. Silbert, Impact forces on plateform horizontal members in the splash zone, Offshore Technology Conf, Proc, pp.749-758, 1976.

J. P. Lepetit, M. Et, and . Sabaton, Etude de la stabilité et du franchissement d'une digue en enrochements de pente 3, Rapport E.D.F. HE, vol.2, issue.168, pp.74-111, 1974.

M. Luck, J. M. Menon, and E. M. Beno??tbeno??t, Efforts hydrodynamiques sur un cylindre vertical en zonecôtì ere, VIII emes Journées nationales génie civil-génie côtier, pp.603-612, 0199.
DOI : 10.5150/jngcgc.2004.067-l

E. P. Mansard, E. R. Et, and . Funke, The Measurement of Incident and Reflected Spectra Using a Least Squares Method, Coastal Engineering 1980, pp.154-172, 1980.
DOI : 10.1061/9780872622647.008

J. A. Melby, N. Et, and . Kobayashi, Incipient Motion of Breakwater Armor Units, Coastal Engineering 1996, pp.1803-1815, 1996.
DOI : 10.1061/9780784402429.140

L. Melito, J. A. Et, and . Melby, Wave runup, transmission, and reflection for structures armored with CORE-LOC??, Coastal Engineering, vol.45, issue.1, pp.33-52, 2002.
DOI : 10.1016/S0378-3839(01)00044-8

M. Miche, Movements ondulatoires des mers en profondeur constante ou decroissante, Annales des Ponts et Chaussees, vol.114, pp.25-87, 1944.

M. Miche, Le pouvoir réfléchissant des ouvrage maritimes exposésexposésà l'action de la houle, pp.285-319, 1951.

D. Mouazé, Etude expérimentale de la couche limite par la houle autour d'un cylindre, Thèse de doctorat, pp.75-225, 2001.

S. Nallayarasu, C. H. Fatt, and N. J. Shankar, Estimation of incident and reflected waves in regular wave experiments, Ocean Engineering, vol.22, issue.1, pp.77-86, 1994.
DOI : 10.1016/0029-8018(93)E0011-G

M. W. Owen, Design of seawalls allowing for wave overtopping, Hydraulic Research Station, p.35, 1980.

M. W. Owen, The hydraulic design of seawalls profiles, Proc. Conf. on Coastal Protection, Institution of Civil Engineers, pp.129-136, 1982.

J. Pedersen, Experimental study of wave forces and wave overtopping on breakwater crown walls, Series paper 12, p.36, 1996.

W. J. Pierson, L. Et, and . Moskowitz, A proposed spectral from for fully developed wind seas based on the similarity law of S, A. Kitaiggorodskii, J. of Geophys Res, vol.69, issue.11, p.12, 1964.

K. W. Pilarczyk, M. Klein-breteler, and E. A. Bezuijen, Wave forces and structural response of placed block revetments on inclined structures, Wave forces on inclined and vertical structures, pp.961-973, 1995.

G. M. Postma, Wave reflection from rock slopes under random wave attack, p.140, 1989.

J. R. Rathbun, D. T. Cox, and B. L. Edge, Wave Runup and Reflection on Coastal Structures in Depth-Limited Conditions, Coastal Engineering 1998, pp.1503-1067, 1998.
DOI : 10.1061/9780784404119.078

J. M. Rousset, Soliicitations d'une digue jarlan sous l'action de houles aléatoires, Master's thesis, Thèse de doctorat, p.68, 2000.

J. S. Russell, Report on waves, 14 th meeting of the British Association for the Advancement of Science, p.13, 1844.

H. Schüttrumpf, J. Möller, H. Oumeraci, J. Grüne, and E. R. Weissmann, Effects of natural sea states on wave overtopping of sea dikes, Proc. 4 th Int. Symposium on Ocean Wave Measurement and Analysis, pp.1565-1574, 2001.

W. N. Seeling, Two-dimensional tests of wave transmission and reflection characteristics of laboratory breakwaters, p.41, 1980.

W. N. Seeling, Wave reflection from coastal structures, Proc. of Coast. Structures '83, pp.961-973, 1983.

W. N. Seeling, J. P. Et, and . Ahrens, Estimation of wave reflection and energy dissipation coefficients for beaches, revetments and breakwaters, pp.81-82, 1981.

T. P. Stewart, S. D. Newberry, J. Latham, J. D. Simm, and G. , Packing and voids for rock armour in breakwaters, On the theory of oscillatory waves, pp.441-455, 1847.

G. Susbielles, C. Et, and . Bratu, Vagues et ouvrages pétroliers en mer, Publications de l'institut français du pétrole, 0201.

H. Tabet, J. Brossard, M. Colinet, and E. B. Jacinthe, Effet de la butée de pied poséeposéè a faible profondeur sur la stabilité de talus de protection, VIII emes Journées nationales génie civil-génie côtier,Compì egne, pp.7-9, 2004.

D. M. Thompson, R. M. Et, and . Shuttler, Riprap design for wind wave attack, a laboratory study in random waves, p.32, 1975.

A. Tørum, Wave???Induced Forces on Armor Unit on Berm Breakwaters, Journal of Waterway, Port, Coastal, and Ocean Engineering, vol.120, issue.3, pp.251-268, 1994.
DOI : 10.1061/(ASCE)0733-950X(1994)120:3(251)

J. W. Van-der-meer, Stability of breakwater armour layers ??? design formulae, Coastal Engineering, vol.11, issue.3, pp.219-239, 1987.
DOI : 10.1016/0378-3839(87)90013-5

J. W. Van-der-meer, Rock slops and gravel beaches under wave attack, pp.148-150, 1988.

J. W. Van-der-meer, Stability of cubes, tetrapods and accropods, Design of Breakwaters, Proc. Breakwater 88 conference, pp.56-61, 1988.

J. W. Van-der-meer, Verification of breakwat for berm breakwaters and low-crested structures, p.41, 1990.

J. W. Van-der-meer, Conceptual Design of rubble mound breakwaters, Delft hydraulics , Publication number 483, p.32, 1993.

J. W. Van-der-meer, W. Et, and . Janssen, Wave run-up and wave overtopping at dikes, In Wave Foces on Inclined and Vertical Wall Structures, pp.1-27, 1995.

J. W. Van-der-meer, C. J. Et, and . Stam, Wave Runup on Smooth and Rock Slopes of Coastal Structures, Journal of Waterway, Port, Coastal, and Ocean Engineering, vol.118, issue.5, pp.534-550, 1992.
DOI : 10.1061/(ASCE)0733-950X(1992)118:5(534)

J. W. Van-der-meer, H. A. Petit, P. Van-den-bosch, and E. G. Klopman, Numerical Simulation of Wave Motion on and in Coastal Structures, Coastal Engineering 1992, pp.1772-1784, 1992.
DOI : 10.1061/9780872629332.134

J. W. Van-der-meer, K. Angremond, and E. E. Greding, Advances in coastal structures and breakwaters, Toe structure stability of rubble mound breakwaters, p.25, 1995.

M. R. Van-gent, Porous Flow through Rubble-Mound Material, Journal of Waterway, Port, Coastal, and Ocean Engineering, vol.121, issue.3, pp.311-339, 1995.
DOI : 10.1061/(ASCE)0733-950X(1995)121:3(176)

M. R. Bibliographie-van-gent, Numerical modelling of the wave interaction with dynamically stable strucutures, Proc. 20 th Int. Conf. on Coast. Engrg., ASCE, pp.1930-1943, 1996.

M. R. Van-gent, Recent development in the conceptual design of rubble mound breakwaters, COPEDEC VI, p.48, 2003.

M. R. Van-gent, G. B. Spann, S. E. Plate, E. Berendson, J. W. Van-der-meer et al., Single-layer rubble mound breakwaters, Proc. 3 th Int. Conf. Coast. Structures, pp.7-10, 1999.

M. R. Van-gent, K. D-'angremond, and E. R. Triemstra, Rubble mound breakwaters: Single armour layers and high-density concrete units, Proc. Coastlines, Structures and Breakwaters, ICE, p.48, 2001.
DOI : 10.1680/bcsac.30428.0026

H. R. Wallingford, High island water scheme -hong kong. a study on the use of dolos armour units for wave protection on the seaward face of the eastern damage, Hydraulics Research Station, pp.166-226, 1970.

P. Weill, Formation etévolutionetévolution de cheniers en contexte macrotidal. approches expérimentales et in-situ, Thèse de doctorat, p.233, 2010.

G. Wolters, Guidelines for physical model testing of breakwaters : rubble mound breakwaters, HYDRALAB III Deliverable NA3, p.83, 2007.

O. Yagci, S. Et, and . Kapdasli, Alternative placement technique for antifer blocks used on breakwaters, Ocean Engineering, vol.30, issue.11, pp.1433-1451, 2003.
DOI : 10.1016/S0029-8018(02)00134-8

O. Yagci, S. Kapdasli, and H. K. Cigizoglu, The stability of the antifer units used on breakwaters in case of irregular placement, Ocean Engineering, vol.31, issue.8-9, pp.1111-1127, 2004.
DOI : 10.1016/j.oceaneng.2003.10.008

Y. Yuksel, R. Et, and . Narayanan, Breaking wave forces on horizontal cylinders close to the sea bed, Coastal Engineering, vol.23, issue.1-2, pp.115-133, 0199.
DOI : 10.1016/0378-3839(94)90018-3

B. Zanuttigh, J. W. Et, and . Van-der-meer, WAVE REFLECTION FROM COASTAL STRUCTURES, Coastal Engineering 2006, pp.4337-4349, 2006.
DOI : 10.1142/9789812709554_0364

S. Dommage, sur la base d'une zoné erodée, p.59, 2007.

.. Principe-de-l-'anémométrie-laseràlaserà-effet-doppler, 73 II.10 Configuration générale de Vélocimétrie LaseràLaserà effet Doppler, Mouazé, p.75, 2001.

). Fréquence-d-'amortissement-de-la-tige-(-exemple, 79 II.16 Dispositifs d'acquisition pour la mesure des efforts (oscilloscope, conditionneurs , convertisseur), p.79

.. La-hauteur-de-la-houle, 128 IV.18 Run-up et run-down en fonction de la hauteur de la houle, p.129

I. La-hauteur-de-la-houle..... and P. Du, 131 IV.20 Evolution du franchissement en fonction la hauteur de la houle incidente, cas, p.132

.. Avec-un-noyau-perméable..-un-noyau-perméable and .. , 145 IV.33 Run-down sur un talus rugueux avec 147 IV.34 Comparaison des run-up relatifs en fonction du paramètre d'Iribarren . . 148 IV.35 Points de mesures et courbes ajustées du run-up relatif 149 IV.36 Points de mesures et courbe ajustée du run-down relatif, IV.32Évolution32´32Évolution du run-up sur un talus rugueux 151 IV.38 Franchissement sur un talus rugueux avec un noyau perméable . . . . . . 153 IV.39 Comparaison de résultats expérimentaux et de données issus des travaux de Bruce et, p.154, 2009.

T. Des and F. , 9 Run-up/run-down en fonction du nombre d'Iribarren. Comparaison des différents plans de pose, p.262

A. Valeurs-des-coefficients, B. , and C. , deséquationsdeséquations (I.29) et (I.30) (CETMEF (2007)), 29 I.4 Coefficients deséquationsdeséquations (I.31) ` a (I.33) (EurOtop (2007)) . . . . . . . . 31 I.5

A. Valeurs-des-coefficients, B. , and C. , D dans leséquationsleséquations (I.43) et (I.44) . 37 I

D. Formules-de, Relations entre la géométrie et les paramètres de base des blocs artificiels, p.101

.. De-pose, 108 III.8 Relations entre la géométrie et les paramètres de base du bloc-Note : Abréviation : F p : Facilité de pose ; P o : Porosité ; P r :Perméabilité ; F r :Franchissement ; E n =Enchevêtrement ; F s : Frottement ; E c :Epaisseur de la couche, III.7 Caractéristiques de différents plans

. Valeurs-ajustées-de-courbe-obtenue-de-travail-de-pilarczyk, 151 IV.10 Paramètres caractéristiques des essais de franchissement 156 IV.13 Paramètres hydrauliques des essais en houlerégulì ere, 151 IV.11 Paramètres caractéristiques des essais de stabilité 162 IV.14 Conditions des travaux presentés dans la figure IV.54 . . . . . . . . . . . 165 IV.15 Valeurs ajustées de courbes issues des travaux du LNH (Lepetit et Sabaton, p.168, 1970.

.. Paramètres-de-misè-a-l-'´-echelle, 230 A.2 U p dans le prototype, D n 50=0,35m, p.230

. C. Fig, Profil de la vitesse transversale en fonction de la distance au bloc