L. Zhu, N. Zhang, F. Sun, R. Bolot, M. Planche et al., Thin Yttria-Stabilized Zirconia Coatings Deposited by Low-Energy Plasma Spraying Under Very Low Pressure Condition, Journal of Thermal Spray Technology, vol.10, issue.1, pp.1118-1124, 2011.
DOI : 10.1007/s11666-011-9659-4

R. Heimann, Plasma-spray coating, 1996.
DOI : 10.1002/9783527614851

S. Sampath and H. Herman, Rapid solidification and microstructure development during plasma spray deposition, Journal of Thermal Spray Technology, vol.45, issue.9, pp.445-456, 1996.
DOI : 10.1007/BF02645275

C. Mateus, Les revêtements composites céramique/ploymère: Etude de la faisabilité par projection thermique à la torche à plasma, Thèse de doctorat, 2002.

N. Zhang, F. Sun, L. Zhu, M. P. Planche, H. Liao et al., Electron Temperature and Density of the Plasma Measured by Optical Emission Spectroscopy in VLPPS Conditions, Journal of Thermal Spray Technology, vol.18, issue.B2, 2011.
DOI : 10.1007/s11666-011-9681-6

L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, 2008.
DOI : 10.1002/9780470754085

A. Refke, M. Gindrat, K. Von-niessen, and R. Damani, LPPS Thin Film: A Hybrid Coating Technology Between Thermal Spray and PVD for Functional Thin Coatings and Large Area Applications, Proc. of the Inter. Therm. Spray Conf, pp.705-710, 2007.

A. Hospach, G. Mauer, R. Vaßen, and D. Stöver, Columnar-Structured Thermal Barrier Coatings (TBCs) by Thin Film Low-Pressure Plasma Spraying (LPPS-TF), Journal of Thermal Spray Technology, vol.5, issue.6, pp.116-120, 2011.
DOI : 10.1007/s11666-010-9549-1

K. Von-niessen, M. Gindrat, and A. Refke, Vapor Phase Deposition Using Plasma Spray-PVD???, Journal of Thermal Spray Technology, vol.417, issue.1-2, pp.502-509, 2010.
DOI : 10.1007/s11666-009-9428-9

M. Loch and G. Barbezat, Characteristics and Potential Application of Thermally Sprayed Thin Film Coatings, Thermal Spray: Surface Engineering via Applied Research, Pub. ASM International, pp.1141-1144, 2000.

M. Loch, G. Barbezat, and P. Meyer, Progress in the area of low pressure plasma spraying, Proc. of the Inter. Therm. Spray Conf, pp.347-351, 2002.

A. Refke, D. Hawley, J. Doesburg, and R. Schmid, LPPS Thin Film Technology for the Application of TBC Systems, Proc. of the Inter. Therm. Spray Conf, pp.438-443, 2005.

M. F. Smith, A. C. Hall, J. D. Fleetwood, and P. Meyer, Very Low Pressure Plasma Spray???A Review of an Emerging Technology in the Thermal Spray Community, Coatings, vol.1, issue.2, pp.117-132, 2011.
DOI : 10.3390/coatings1020117

A. Refke, G. Barbezat, J. L. Dorier, M. Gindrat, and C. Hollenstein, Characterization of LPPS Processes Under Various Spraying Conditions for Potential Applications, Proc. of the Inter. Therm. Spray Conf, pp.581-588, 2003.

E. Muehlberger and P. Meyer, LPPS-Thin Film Processes: Overview of Origin and Future Possibilities, Proc. of the Inter. Therm. Spray Conf, pp.737-740, 2009.

M. Gindrat, A. Refke, and R. Schmid, Process Characterization of LPPS Thin Film Processes with Optical Diagnostics, Proc. of the Inter. Therm. Spray Conf, pp.826-831, 2007.

E. Muehlberger, Method of Forming Uniform Thin Coatings on Large Substrates, p.5853815, 1998.

K. Von-niessen, M. Gindrat, and A. Refke, Vapor Phase Deposition Using LPPS Thin Film, Proc. of the Inter. Therm. Spray Conf, pp.729-736, 2009.

N. Zhang, F. Sun, L. Zhu, C. Verdy, M. P. Planche et al., Characteristics of Cu Film Deposited Using VLPPS, Journal of Thermal Spray Technology, vol.13, issue.378, pp.351-357, 2011.
DOI : 10.1007/s11666-010-9538-4

U. Schulz and M. Schmücker, Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD, Materials Science and Engineering: A, vol.276, issue.1-2, pp.276-277, 2000.
DOI : 10.1016/S0921-5093(99)00576-6

T. R. Kakuda, A. M. Limarga, T. D. Bennett, and D. R. Clarke, Evolution of thermal properties of EB-PVD 7YSZ thermal barrier coatings with thermal cycling, Acta Materialia, vol.57, issue.8, pp.2583-2591, 2009.
DOI : 10.1016/j.actamat.2009.02.019

K. Von-niessen and M. Gindrat, Plasma Spray-PVD: A New Thermal Spray Process to Deposit Out of the Vapor Phase, Journal of Thermal Spray Technology, vol.417, issue.4, pp.736-743, 2011.
DOI : 10.1007/s11666-011-9654-9

P. Fauchais, G. Montavon, and G. Bertrand, From Powders to Thermally Sprayed Coatings, Journal of Thermal Spray Technology, vol.202, issue.4, pp.56-80, 2010.
DOI : 10.1007/s11666-009-9435-x

URL : https://hal.archives-ouvertes.fr/hal-00451149

P. Guittienne, C. Hollensteinm, J. L. Dorier, M. Gindrat, and A. Refke, Use of Low-Pressure Plasma Spraying Equipment to Produce Thin Films and Thick Coatings using Liquid and Gaseous Precursors, Proc. of the Int. Therm. Spray Conf, pp.741-745, 2009.

R. Kingswell, K. T. Scott, and L. L. Wassel, Optimizing the vacuum plasma spray deposition of metal, ceramic, and cermet coatings using designed experiments, Journal of Thermal Spray Technology, vol.58, issue.9, pp.179-185, 1993.
DOI : 10.1007/BF02652027

R. Bolot, D. Sokolov, D. Klein, and C. Coddet, Nozzle Developments for Thermal Spray at Very Low Pressure, Journal of Thermal Spray Technology, vol.15, issue.4, pp.827-833, 2006.
DOI : 10.1361/105996306X146992

G. Mauer, R. Vaßen, and D. Stöver, Plasma and Particle Temperature Measurements in Thermal Spray: Approaches and Applications, Journal of Thermal Spray Technology, vol.19, issue.1-2, pp.391-406, 2011.
DOI : 10.1007/s11666-010-9603-z

T. Yoshida, Toward a new era of plasma spray processing, Pure and Applied Chemistry, vol.78, issue.6, pp.1093-1107, 2006.
DOI : 10.1351/pac200678061093

J. L. Dorier, P. Guittienne, C. Hollenstein, M. Gindrat, and A. , Refke, Mechanisms of films and coatings formation from gaseous and liquid precursors with low pressure plasma spray equipment, Surf. Coat. Technol, pp.203-2125, 2009.

P. Hollenstein and . Spray-cvd, A New Thermal Spray Process to Produce Thin Films from Liquid or Gaseous Precursors, J. Therm. Spray Technol, vol.20, pp.882-887, 2011.

D. Hawley, Improved Quality, Reduced Cost and Cycle Times, Sulzer Technical Review, vol.3, pp.14-16, 2007.

M. Dzulko, G. Forster, and K. D. Landes, Plasma torch developments, Proc. of the Inter. Therm. Spray Conf, pp.191-197, 2005.

G. Barbezat and K. Landes, Plasma Torch-System Triplex: Increased Production and a More Stable Process, Sulzer Technical Review, vol.4, pp.32-35, 1999.

E. Pfender and S. P. Minn, Method of utilizing a plasma column, p.16, 1988.

E. Pfender and S. P. Minn, Multiple arc plasma device with continuous gas jet, 1989.

D. Ross, Plasma torch with axial reactant feed, 1991.

D. Ross and A. Burgess, Plasma jet converging system, 1996.

A. W. Burgess, P. Hartell, and C. Davidson, Method and system for producing coatings from liquid feedstock using axial feed, 2009.

K. Landes, Plasma spray apparatus for spraying powdery material, 1995.

G. Barbezat, Triplex II: A New Era in Plasma Technology, Sulzer Technical Review, vol.1, pp.20-21, 2002.

K. D. Landes, G. Forster, J. Zierhut, M. Dzulko, and D. Hawley, Computer tomography of plasma jets-applied on a triplex II torch, Proc. of the Int. Therm

R. J. Molz, R. J. Mcculough, and T. Wintergers, Better Performance of Plasma Thermal Spray through Computational Fluid Dynamics, 2006.

L. Zhu, N. Zhang, F. Sun, R. Bolot, H. Liao et al., An Improvement of Low Power Plasma Torch for Very Low Pressure Plasma Sprayed Thin and Dense Ceramic Coatings, Proceedings of the ITSC, p.2011

M. Gindrat, A. Refke, and R. Schmid, Process characterization of LPPS thin film process with optical diagnostics, Proceedings of the ITSC 2007

. Une-introduction-de, ChamPro LPPS-TF Applies Coatings to Large Areas Faster with Unique, High Performance Properties

L. Zhu, N. Zhang, F. Sun, R. Bolot, M. Planche et al., Thin Yttria-Stabilized Zirconia Coatings Deposited by Low-Energy Plasma Spraying Under Very Low Pressure Condition, Journal of Thermal Spray Technology, vol.10, issue.1
DOI : 10.1007/s11666-011-9659-4

H. Tahara, Y. Ando, and T. Yoshikawa, Plasma Characteristics of Supersonic Nitrogen/Hydrogen-Mixture and Ammonia Plasma Jets and Nitrided Material Properties, Materials Science Forum, vol.449, issue.452, pp.457-174, 2004.
DOI : 10.4028/www.scientific.net/MSF.449-452.373

H. Chen and C. X. Ding, Nanostructured zirconia coating prepared by atmospheric plasma spraying, Surface and Coatings Technology, vol.150, issue.1, pp.31-36, 2002.
DOI : 10.1016/S0257-8972(01)01525-0

N. Spinhirne, D. Hirschfeld, A. Hall, and J. Mccloskey, The Development and Characterization of Novel Yttria-Stabilized Zirconia Coatings Deposited by Very Low Pressure Plasma Spray, Proceedings of the ITSC 2009

T. Yoshida, Toward a new era of plasma spray processing, Pure and Applied Chemistry, vol.78, issue.6, pp.1083-1097, 2006.
DOI : 10.1351/pac200678061093

S. Sampath, X. Y. Jiang, A. Matejicek, A. Leger, and . Vardelle, Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: Case study for partially stabilized zirconia, Materials Science and Engineering: A, vol.272, issue.1, pp.272-181, 1999.
DOI : 10.1016/S0921-5093(99)00459-1

D. K. Luce, Electrically isolated gas cups for plasma transfer arc welding torches, and related methods, Brevet des Etats-Unis, N°, 2010.

C. Girold, A. Bourgier, L. Bruguière, and E. F. Lemort, Transferred-arc plasma torch, Brevet des Etats-Unis, N°, 2009.

J. A. Browning, Transferred-arc plasma apparatus and process with gas heating in excess of anode heating at the workpiece, 1988.

Y. Gao, Double-anode plasma reactor

D. Sokolov, Contribution au Developpement de la Projection Thermique sous Très Faible Pression, Thèse de doctorat, 2009.

R. Bolot, D. Sokolov, D. Klein, and C. Coddet, Nozzle Developments for Thermal Spray at Very Low Pressure, Journal of Thermal Spray Technology, vol.15, issue.4, pp.827-833, 2006.
DOI : 10.1361/105996306X146992

L. Zhu, N. Zhang, F. Sun, R. Bolot, M. Planche et al., Very low pressure plasma sprayed alumina and yttria-stabilized zirconia thin dense coatings using a modified transferred arc plasma torch, Applied Surface Science, vol.258, issue.4, 2011.
DOI : 10.1016/j.apsusc.2011.09.095

L. Zhu, N. Zhang, F. Sun, R. Bolot, H. Liao et al., An Improvement of Low Power Plasma Torch for Very Low Pressure Plasma Sprayed Thin and Dense Ceramic Coatings, Proceedings of the ITSC, p.2011

J. H. Cui, Z. F. Xu, J. L. Zhang, Q. Y. Nie, G. H. Xu et al., Online diagnosis of electron excitation temperature in CH 4 +H 2 discharge plasma at atmospheric pressure by optical emission Spectra, pp.51-1892, 2008.

N. Zhang, Diagnostics d'un jet plasma d'arc soufflé sous très faible pression, Thèse de doctorat, 2010.

Z. Y. Guo and W. H. Zhao, Arc and Thermal Plasma, 1986.

Y. J. Liang and Y. C. Che, Handbook of inorganic thermodynamic data, Northeast university press, 1993.

K. Maiti and A. Sil, Relationship between fracture toughness characteristics and morphology of sintered Al2O3 ceramics, Ceramics International, vol.36, issue.8, pp.2337-2344, 2010.
DOI : 10.1016/j.ceramint.2010.07.031

R. Heimann, Plasma-spray coating, 1996.
DOI : 10.1002/9783527614851

K. Von-niessen, M. Gindrat, and A. Refke, Vapor Phase Deposition Using Plasma Spray-PVD???, Journal of Thermal Spray Technology, vol.417, issue.1-2, pp.502-509, 2010.
DOI : 10.1007/s11666-009-9428-9

L. Zhu, J. He, D. Yan, L. Xiao, Y. Dong et al., Synthesis and microstructure observation of titanium carbonitride nanostructured coatings using reactive plasma spraying in atmosphere, Applied Surface Science, vol.257, issue.20, pp.257-8722, 2011.
DOI : 10.1016/j.apsusc.2011.05.056

Q. Wei, H. Guo, S. Gong, and H. Xu, Novel microstructure of EB-PVD double ceramic layered thermal barrier coatings, Thin Solid Films, vol.516, issue.16, pp.516-5736, 2008.
DOI : 10.1016/j.tsf.2007.07.032

X. He, B. Meng, Y. Sun, B. Liu, and M. Li, Electron beam physical vapor deposition of YSZ electrolyte coatings for SOFCs, Applied Surface Science, vol.254, issue.22, pp.7159-7164, 2008.
DOI : 10.1016/j.apsusc.2008.05.271

N. Spinhirne, D. Hirschfeld, A. Hall, and J. Mccloskey, The Development and Characterization of Novel Yttria-Stabilized Zirconia Coatings Deposited by Very Low Pressure Plasma Spray, Proceedings of the ITSC 2009

C. J. Li and B. Sun, Microstructure and property of micro-plasma-sprayed Cu coating, Materials Science and Engineering: A, vol.379, issue.1-2, pp.379-92, 2004.
DOI : 10.1016/j.msea.2003.12.030

S. Zahir, Développement de Techniques pour le Diagnostic des Procédés de Projection Thermique sous Pression Réduite, Thèse de doctorat, 2004.

Z. Salhi, D. Klein, P. Gougeon, and C. Coddet, Development of coating by thermal plasma spraying under very low-pressure condition <1 mbar, Vacuum, p.77, 2005.

N. Markocsan, P. Nylén, J. Wigren, and X. Li, Low Thermal Conductivity Coatings for Gas Turbine Applications, Thermal Conductivity Coatings for Gas Turbine Applications, pp.498-505, 2007.
DOI : 10.1007/s11666-007-9068-x

K. Shinozawa, M. Eguchi, T. Kambara, and . Yoshida, Feather-like Structured YSZ Coatings at Fast Rates by Plasma Spray Physical Vapor Deposition, Journal of Thermal Spray Technology, vol.3, issue.1, pp.190-197, 2010.
DOI : 10.1007/s11666-009-9410-6

D. Stöver and C. Funke, Directions of the development of thermal barrier coatings in energy applications, Journal of Materials Processing Technology, vol.92, issue.93, pp.92-93, 1999.
DOI : 10.1016/S0924-0136(99)00244-7

J. Puric and A. Kobayashi, Novel plasma generating systems for advanced materials processing, Vacuum, vol.85, issue.5, pp.85-555, 2010.
DOI : 10.1016/j.vacuum.2010.08.011

H. Wang, R. B. Dinwiddie, and W. D. Porter, Development of a thermal transport database for air plasma sprayed ZrO 2 -Y 2 O 3 thermal barrier coatings, J. Therm

R. Vaßen, M. O. Jarligo, T. Steinke, D. Mack, and D. Stöver, Overview on advanced thermal barrier coatings, Overview on advanced thermal barrier coatings, pp.938-942, 2010.
DOI : 10.1016/j.surfcoat.2010.08.151

H. J. Rätzer-scheibe, U. Schulz, and T. , The effect of coating thickness on the thermal conductivity of EB-PVD PYSZ thermal barrier coatings, Surface and Coatings Technology, vol.200, issue.18-19, pp.200-5636, 2006.
DOI : 10.1016/j.surfcoat.2005.07.109

T. R. Kakuda, A. M. Limarga, T. D. Bennett, and D. R. Clarke, Evolution of thermal properties of EB-PVD 7YSZ thermal barrier coatings with thermal cycling, Acta Materialia, vol.57, issue.8, pp.2583-2591, 2009.
DOI : 10.1016/j.actamat.2009.02.019

B. Liang, H. L. Liao, C. X. Ding, and C. Coddet, Nanostructured zirconia???30 vol.% alumina composite coatings deposited by atmospheric plasma spraying, Thin Solid Films, vol.484, issue.1-2, pp.225-231, 2005.
DOI : 10.1016/j.tsf.2005.02.040

S. O. Chwa and A. Ohmori, Microstructures of ZrO2-8wt.%Y2O3 coatings prepared by a plasma laser hybrid spraying technique, Surface and Coatings Technology, vol.153, issue.2-3, pp.304-312, 2002.
DOI : 10.1016/S0257-8972(01)01686-3

Q. Zhang, C. J. Li, C. X. Li, G. J. Yang, and S. C. Lui, Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying, Surface and Coatings Technology, vol.202, issue.14, pp.202-3378, 2008.
DOI : 10.1016/j.surfcoat.2007.12.028

S. J. Dong, B. Song, B. Hansz, H. L. Liao, and C. Coddet, Improvement in the properties of plasma-sprayed metallic, alloy and ceramic coatings using dry-ice blasting, Applied Surface Science, vol.257, issue.24, pp.257-10828, 2011.
DOI : 10.1016/j.apsusc.2011.07.113

C. T. Wang, S. R. Jian, J. S. Jang, Y. S. Lai, and P. F. Yang, Multiscale simulation of nanoindentation on Ni (100) thin film, Applied Surface Science, vol.255, issue.5, pp.255-3240, 2008.
DOI : 10.1016/j.apsusc.2008.09.034

C. A. Charitidis, Probing mechanical properties of thin film and ceramic materials in micro- and nano-scale using indentation techniques, Applied Surface Science, vol.256, issue.24, pp.7583-7590, 2010.
DOI : 10.1016/j.apsusc.2010.06.006

B. Ning, M. E. Stevenson, M. L. Weaver, and R. C. Brad, Apparent indentation size effect in a CVD aluminide coated Ni-base superalloy, Surface and Coatings Technology, vol.163, issue.164, pp.163-164, 2003.
DOI : 10.1016/S0257-8972(02)00604-7

Z. J. Peng, J. H. Gong, and H. Z. Miao, On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data, Journal of the European Ceramic Society, vol.24, issue.8, pp.24-2193, 2004.
DOI : 10.1016/S0955-2219(03)00641-1

N. Zotov, M. Bartsch, and G. Eggeler, Thermal barrier coating systems-analysis of

K. Duan and R. W. Steinbrech, Influence of sample deformation and porosity on mechanical properties by instrumented microindentation technique, Journal of the European Ceramic Society, vol.18, issue.2, pp.87-93, 1998.
DOI : 10.1016/S0955-2219(97)00088-5

P. Bengtsson, T. Johannesson, and J. Wigren, Characterization of microstructural defects in plasma-sprayed thermal barrier coatings, Journal of Thermal Spray Technology, vol.50, issue.6, pp.245-251, 1995.
DOI : 10.1007/BF02646967

S. O. Chwa and A. Ohmori, Microstructures of ZrO2-8wt.%Y2O3 coatings prepared by a plasma laser hybrid spraying technique, Surface and Coatings Technology, vol.153, issue.2-3, pp.304-312, 2002.
DOI : 10.1016/S0257-8972(01)01686-3

P. S. Manning, J. D. Sirman, R. A. Souza, and J. A. Kilner, The kinetics of oxygen transport in 9.5 mol % single crystal yttria stabilised zirconia, Solid State Ionics, vol.100, issue.1-2, pp.100-101, 1997.
DOI : 10.1016/S0167-2738(97)00345-7

A. C. Fox and T. W. Clyne, Oxygen transport by gas permeation through the zirconia layer in plasma sprayed thermal barrier coatings, Surface and Coatings Technology, vol.184, issue.2-3, pp.311-321, 2004.
DOI : 10.1016/j.surfcoat.2003.10.018

A. Keyvani, M. Saremi, and M. H. Sohi, An investigation on oxidation, hot corrosion and mechanical properties of plasma-sprayed conventional and nanostructured YSZ coatings, Surface and Coatings Technology, vol.206, issue.2-3, pp.206-208, 2011.
DOI : 10.1016/j.surfcoat.2011.06.036

L. Zhu, N. Zhang, F. Sun, R. Bolot, M. Planche et al., Thin Yttria-Stabilized Zirconia Coatings Deposited by Low-Energy Plasma Spraying Under Very Low Pressure Condition, Journal of Thermal Spray Technology, vol.10, issue.1, pp.1118-1124, 2011.
DOI : 10.1007/s11666-011-9659-4

L. Zhu, N. Zhang, R. Bolot, M. Planche, H. Liao et al., Very low pressure plasma sprayed yttria-stabilized zirconia coating using a low-energy plasma gun, Applied Physics A, vol.204, issue.4, pp.105-991, 2011.
DOI : 10.1007/s00339-011-6529-3

L. Zhu, N. Zhang, F. Sun, R. Bolot, M. Planche et al., Very low pressure plasma sprayed alumina and yttria-stabilized zirconia thin dense coatings using a modified transferred arc plasma torch, Applied Surface Science, vol.258, issue.4, pp.258-1422, 2011.
DOI : 10.1016/j.apsusc.2011.09.095

L. Zhu, J. He, D. Yan, L. Xiao, and Y. Dong, Jianxin Zhang, and Hanlin Liao, Synthesis and Microstructure Observation of Titanium Carbonitride Nanostructured Coatings Using Reactive Plasma Spraying in Atmosphere, Applied Surface Science, pp.257-8722, 2011.

L. Zhu, J. He, D. Yan, L. Xiao, Y. Dong et al., Atmospheric Reactive Plasma Sprayed Fe-Al 2 O 3 -FeAl 2 O 4 Composite Coating and its property evaluation, Applied Surface Science, pp.257-10282, 2011.

N. Zhang, F. Sun, L. Zhu, C. Verdy, M. P. Planche et al., Characteristics of Cu Film Deposited Using VLPPS, Journal of Thermal Spray Technology, vol.13, issue.378, pp.351-357, 2011.
DOI : 10.1007/s11666-010-9538-4

N. Zhang, F. Sun, L. Zhu, M. P. Planche, H. Liao et al., Electron Temperature and Density of the Plasma Measured by Optical Emission Spectroscopy in VLPPS Conditions, Journal of Thermal Spray Technology, vol.18, issue.B2, pp.1321-1327, 2011.
DOI : 10.1007/s11666-011-9681-6

B. Zhang, L. Nour-eddine-fenineche, and . Zhu, Hanlin Liao, and Christian Coddet, Preparation and Magnetic Properties of Permalloy (Fe-30%Ni) by Selective Laser Melting Technology, Journal of Magnetism and Magnetic Materials, pp.324-495, 2012.

L. Zhu, N. Zhang, B. Zhang, and R. Bolot, Hanlin Liao, and Christian Coddet, A Novel Approach for In-Situ Synthesized FeAl Super-Dense Coating Using Very Low Pressure-Reactive Plasma Spraying, Scripta Materialia, p.2011

L. Zhu, J. He, D. Yan, L. Xiao, and Y. Dong, Jianxin Zhang, and Hanlin Liao, Oxidation Behavior of Titanium Carbonitride Coating Deposited by Atmospheric Reactive Plasma Spray Process, Surface and Coatings Technology, p.2011

L. Zhu, N. Zhang, R. Bolot, H. Liao, and C. Coddet, Formation Mechanisms of Fe-Al 2 O 3 -FeAl 2 O 4 and FeAl Coatings Synthesized by Reactive Plasma Spraying under Atmosphere and Low Pressure Conditions, Materials & Design, p.2011

L. Zhu, N. Zhang, F. Sun, R. Bolot, H. Liao et al., An Improvement of Low Power Plasma Torch for Very Low Pressure Plasma Sprayed Thin and Dense Ceramic Coatings, Proceedings of the ITSC, p.2011

L. Zhu, N. Zhang, R. Bolot, M. Planche, H. Liao et al., A Comparison of Thermal Shock Behavior between APS and Low-energy VLPPS ZrO 2 -7%Y 2 O 3 thermal barrier coatings, Proceedings of the ITSC 2012

L. Zhu, N. Zhang, R. Bolot, H. Liao, and C. Coddet, A novel method for in-situ synthesis of FeAl dense coating deposited by very low pressure reactive plasma spraying, Proceedings of the ITSC 2012

N. Zhang, F. Sun, L. Zhu, M. P. Planche, H. Liao et al., Measurement of Specific Enthalpy Under Very Low Pressure Plasma Spray Condition, Proceedings of the ITSC, p.2011
DOI : 10.1007/s11666-012-9738-1