L. Hui, G. X. Hui, Y. Jie, and O. Jinping, Microstructure of cement mortar with nano-particles, Composites Part B: engineering, vol.35, pp.185-189, 2004.

C. S. Poon, Z. H. Shui, and L. Lam, Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures, Cement and Concrete Research, vol.34, issue.12, pp.2215-2222, 2004.
DOI : 10.1016/j.cemconres.2004.02.011

F. Ulm and M. J. Dejong, The nanogranular behavior of C-S-H at elevated temperatures (up to 700 °C, Cement and Concrete Research, pp.1-12, 2007.

. T. Phan-l, -Pore pressure in high-strengh concrete at high temperature, NIST, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00897449

P. Acker and M. C. Reymond, L'apport des moyens non destructifs dans l'interprétation du comportement instantané et différé du béton durci, colloque Liaison pâtes de ciment matériaux associés, 1982.

Y. Anderberg, Cracking phenomena of HPC and OC, Int. Workshop on Fire Performance of High-Strength-Concrete, pp.69-73, 1997.

E. Annerel and L. Taerwe, Load bearing capacity of precast concrete elements after fire, Proceeding of 1 st International Workshop on Concrete Spalling due to Fire Exposure, pp.41-51, 2009.

B. Z. Al, Effect of exposure to elevated temperature on polypropylene fiber-reinforced concrete, ACI Materials Journal, vol.99, pp.22-26, 2002.

Z. P. Bazant, Analysis of pore pressure, thermal stresses and fracture in rapidly heated concrete. International Workshop on Fire Performance of High Strength Concrete, NIST, pp.155-164, 1997.

V. P. Lévy, Comportement du béton dans les incendies de tunnels, Tunnels et Ouvrages Souterrains, vol.203, pp.301-308, 2007.

V. Boel and K. Audenaert, Gas permeability and capillary porosity of self-compacting concrete, Materials and Structures, vol.15, issue.4, pp.1283-1290, 2008.
DOI : 10.1617/s11527-007-9326-x

A. Bilodeau, V. K. Kodur, and G. C. Hoff, Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire, Cement and Concrete Composites, pp.163-174, 2004.

C. Bordier and D. Zimmer, Drainage equations and non-Darcian modelling in coarse porous media or geosynthetic materials, Journal of Hydrology, vol.228, issue.3-4, pp.174-187, 2000.
DOI : 10.1016/S0022-1694(00)00151-7

M. Buil and J. P. Ollivier, Conception des bétons : la structure poreuse, « la durabilité des bétons, Presse de l'ENPC, chapitre 3, pp.57-99, 1992.

M. Castellote, C. Alonso, C. Andrade, X. Turrillas, and J. Campo, Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction, Cement and Concrete Research, vol.34, issue.9, pp.1633-1644, 2004.
DOI : 10.1016/S0008-8846(03)00229-1

Y. N. Chan, X. Luo, and W. Sun, Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800??C, Cement and Concrete Research, vol.30, issue.2, pp.247-251, 2000.
DOI : 10.1016/S0008-8846(99)00240-9

E. Charlaix, E. Guyon, and S. Roux, Permeability of a random array of fractures of widely varying apertures, Transp. Porous Media 2, pp.31-43, 1987.
DOI : 10.1007/BF00208535

Y. N. Chan, G. F. Peng, and M. Anson, INSA de Lyon, tous droits réservés [CHA 99 Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures, these.pdf © [R. Haniche] Cement and Concrete Composites, pp.23-27, 1999.

M. Choinska, A. Khelidj, G. Chatzigeorgiou, and G. Pijaudier-cabot, Effects and interactions of temperature and stress-level related damage on permeability of concrete, Cement and Concrete Research, vol.37, issue.1, pp.79-88, 2007.
DOI : 10.1016/j.cemconres.2006.09.015
URL : https://hal.archives-ouvertes.fr/hal-00354323

R. J. Connolly, The spalling of concrete in Fires, Thèse de doctorat, p.294, 1995.

G. R. Consolazio, M. Vay, M. Rish, and I. J. , Measurement and prediction of pore pressure in cement mortar subjected to elevated temperature

R. A. Cook and K. C. Hover, Mercury porosimetry of hardened cement pastes, Cement and Concrete Research, vol.29, issue.6, pp.933-943, 1999.
DOI : 10.1016/S0008-8846(99)00083-6

]. Dai-86 and . Daïan, Processus de condensation et de transfert d'eau dans un matériau méso et macroporeux ? Etude expérimentale du mortier de ciment, Thèse, Institut National Polytechnique de Grenoble (INPG), pp.319-1986

]. Dai-88 and . Daïan, Condensation and isothermal water transfer in cement mortar, part I -pore size distribution, equilibrium, water condensation and imbibitions, Transport in Porous Media, pp.563-589, 1988.

M. J. Dejong, F. J. Et, and . Ulm, The nanogranular behavior of C-S-H at elevated temperatures (up to 700????C), Cement and Concrete Research, vol.37, issue.1, pp.1-12, 2007.
DOI : 10.1016/j.cemconres.2006.09.006

S. Diamond and J. Huang, The ITZ in concrete ? a different view based on image analysis and SEM observations, Cement and Concrete Composites, pp.179-188, 2001.

S. Diamond, Considerations in image analysis as applied to investigations of the ITZ in Concrete, Cement and Concrete Composites, pp.171-178, 2001.

U. Diederichs, U. Jumppanen, and V. Fenttala, Behaviour of high strength concrete at elevated temperatures, Report 92, 1992.

. Dtu and . Fb, Norme expérimentale P 92-701

F. A. Dullien, Porous Media : Fluid Transport and Pore Structure, 1979.

G. L. England and N. Khoylou, Pore pressures ans moisture flow in concrete : steady state and transient temperatures, pp.491-501, 1997.

R. Felicetti, Assessment of the equivalent thermal diffusivity for fire analysis of concrete structures. fib task group 4.3 workshop "Fire design on concrete structures ? from materials modelling to structural performance, 2007.

R. Felicetti and P. G. Gambarova, Effects of High Temperature on the Residual Compressive Strength of High-Strenght Siliceous Concretes, ACI materials Journal, vol.95, p.4, 1995.

F. Feraille and A. Ehrlacher, Description de la microstructure du béton à l'aide de la saturation en liquide Revue Française de Génie Civil, 2000.

C. Féron, P. Autuori, and D. Joyeux, Vers des moyens de prévenir l'écaillage du béton en tunnel, Tunnels et ouvrages souterrains, vol.196, pp.228-235, 2006.

P. G. Gambarova, Special issues in materials testing. Course on effect of heat on concrete, 2003.

D. Gawin, F. Pesavento, and B. A. Schrefler, Towards prediction of the thermal spalling risk through a multi-phase porous media model of concrete, Computer methods in applied mechanics and engineering, pp.195-5707, 2006.

D. Gawin, F. Pesavento, and B. A. Schrefler, What physical phenomena can be neglected when modelling concrete at high temperature? A comparative study. Part 1: Physical phenomena and mathematical model, International Journal of Solids and Structures, vol.48, issue.13, pp.1927-1944, 2011.
DOI : 10.1016/j.ijsolstr.2011.03.004

M. S. Gruszkiewicz, J. Horita, J. M. Simonson, R. E. Mesmer, and J. B. Hulen, Water adsorption at high temperature on core samples from The Geysers geothermal field, California, USA, Geothermics, vol.30, issue.2-3, pp.269-302, 2001.
DOI : 10.1016/S0375-6505(00)00049-3

I. Hager and P. Et-pimienta, Mechnical properties of HPC at high temperature. Fib task group 4.3, fire design of concrete structures, pp.2-4

R. Haniche and G. Debicki, Comportement des bétons à hautes températures : Evolution de la perméabilité et mesure de la pression de vapeur, p.71, 2008.

F. Hanna, S. Remond, A. Noumowe, and A. Cousture, High temperature behaviour of self-consolidating concrete : Microstructure and physicochemical properties, Cement and Concrete Research, vol.10, issue.403, pp.488-496, 2010.

T. Harada, J. Takeda, S. Yamane, and F. Furumura, Strength, elasticity and thermal properties of concrete subjected to elevated temperatures, International Seminar on Concrete for Nuclear reactors. ACI Special Publication, paper SP34, pp.377-406, 1972.

T. Harada, J. Takeda, S. Yamane, and F. Furumura, Strength, elasticity and thermal properties of concrete subjected to elevated temperatures. Concrete for nuclear reactors, Americain Concrete Institute, SP-39, pp.179-203, 1973.

N. Hearn and G. Lok, Measurement of permeability under uniaxial compression : a test method, ACI Mater J, vol.95, pp.691-694, 1998.

K. D. Hertz, Limits of spalling of fire-exposed concrete, Fire Safety Journal, vol.38, issue.2, pp.103-116, 2003.
DOI : 10.1016/S0379-7112(02)00051-6

K. D. Hertz and L. S. Sørensen, Test method for spalling of fire exposed concrete, Fire Safety Journal, vol.40, issue.5, pp.466-476, 2005.
DOI : 10.1016/j.firesaf.2005.04.001

K. D. Hertz, Heat-Induced Explosion of Dense Concretes, 1984.

U. Jumppanen, U. Diedrichs, and K. Hinrichsmeyer, Material properties of Fconcrete at high temperatures, Research Report, issue.452, pp.60-1986

P. Kalifa, G. Chéné, and C. Gallé, High-temperature behaviour of HPC with polypropylene fibres, Cement and Concrete Research, vol.31, issue.10, pp.1487-1499, 2001.
DOI : 10.1016/S0008-8846(01)00596-8

P. Kalifa and M. Tsimbrovska, Comportement des BHP à hautes températures, État de la question et résultats expérimentaux, 1998.

. Kan, M. Kanema, M. V. De-morais, A. Noumowe, J. L. Gallias et al., experimental and numerical studies of thermo-hydrous transfers in a concrete exposed to high temperature, Heat and mass transfers, pp.149-164, 2007.

A. J. Katz and A. H. Thompson, Quantitative prediction of permeability in porous rock, Physical Review B, vol.34, issue.11, pp.8179-8181, 1986.
DOI : 10.1103/PhysRevB.34.8179

G. Khoury, A. Anderberg, and Y. , Concrete Spalling Review " Fire Safety Design, 2000.

. Kho, G. A. Khoury, B. N. Grainger, and S. G. , Strain of concrete during first heating to 600°C under load, Magazine of concrete research, pp.195-215, 1985.

. Kho and G. A. Khoury, Strain components of nuclear reactor type concrets during first heat cycle, Nuclear Engineering and Design, vol.156, pp.313-321, 1995.

L. J. Klinkenberg, The permeability of porous media to liquids and gases. Drilling and production Practices. American Petroleum Institute, pp.200-214, 1941.

V. K. Kodur, R. Mcgrath, J. C. Latour, and J. Maclaurin, Experimental Studies on the Fire Endurance of High-Strength Concrete Columns, Internal Report IR, vol.821, 2000.

V. K. Kodur and R. Mcgrath, Fire Endurance of High Strength Concrete Columns, Fire Technology, vol.39, issue.1, pp.73-87, 2003.
DOI : 10.1023/A:1021731327822

J. J. Kollek, The determination of the permeability of concrete to oxygen by the Cembureau method???a recommendation, Materials and Structures, vol.6, issue.33, pp.225-230, 1989.
DOI : 10.1007/BF02472192

H. Köster and I. Odler, Investigations on the structure of fully hydrated Portland cement and tricalcium silicate pastes. I. Bound water, chemical shrinkage and density of hydrates. Cement and Concrete Composites, KOS, vol.86, issue.16, pp.2-207, 1986.

T. T. Lie, Method to calculate the fire resistance of circular reinforced concrete columns, ACI Materials Journal, vol.88, pp.84-91, 1991.

L. H. Wittmann and F. H. , Coupled heat and mass transfer in concrete elements at elevated temperatures, Nuclear engineering and design, vol.156, pp.109-119, 1995.

M. Lion, F. Skoczylas, Z. Lafhaj, and M. Sersar, Experimental study on a mortar. Temperature effects on porosity and permeability. Residual properties or direct measurements under temperature, Cement and Concrete Research, vol.35, issue.10, pp.1937-1942, 2005.
DOI : 10.1016/j.cemconres.2005.02.006
URL : https://hal.archives-ouvertes.fr/hal-00137236

X. Liu, G. Ye, D. Schutter, G. Yuan, Y. Taerwe et al., On the mechanism of polypropylene fibres in preventing fire spalling in self-compacting and high-performance cement paste, Cement and Concrete Research, vol.38, issue.4, pp.487-499, 2008.
DOI : 10.1016/j.cemconres.2007.11.010

V. M. Malhotra, H. S. Wilson, . Et, and K. E. Painter, Performance of gravelstone concrete incorporating silica fume at elevated temperatures, Proceeding of Trondheim (Norway) Conference, pp.1051-1076, 1989.

B. Marsh, R. Day, and D. Bonner, Pore structure characteristics affecting the permeability of cement paste containing fly ash, Cement and Concrete Research, vol.15, issue.6, pp.1027-1038, 1985.
DOI : 10.1016/0008-8846(85)90094-8

D. Matesova, D. Bonen, and S. P. Shah, Factors affecting the resistance of cementitious materials at high temperatures and medium[0] heating rates, Materials and Structures, vol.38, issue.161, pp.455-469, 2006.
DOI : 10.1007/s11527-005-9041-4

M. Mazloom, A. A. Ramezanianpour, and J. J. Brooks, Effect of silica fume on mechanical properties of high-strength concrete. Cement and Concrete Composites, pp.347-357, 2004.

. K. Meh-86-]-p and . Mehta, Concrete : structure, properties and materials, pp.438-1986

A. Menou, Etude du comportement thermomécanique des bétons à haute température : Approche multi échelles de l'endommagement thermique, Thèse International Workshop on Concrete Spalling due to Fire Exposure, pp.140-149, 2009.

L. J. Parrot, characteristics of surface layers that affect the durability of concrete. Proceeding Of Engineering foundation Conference on Advance in Cement Manufacture and Use, pp.137-142, 1988.

L. T. Phan, J. R. Lawson, and F. L. David, Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete, Materials and Structures, vol.28, issue.3, pp.83-91, 2001.
DOI : 10.1007/BF02481556

J. Piasta, Heat deformation of cement phases and microstructure of cement paste : Materials and structures : research and testing, RILEM. Paris, vol.17, issue.102, pp.415-420, 1994.

V. Picandet, A. Khelidj, and G. Bastian, Effect of axial compressive damage on gas permeability of ordinary and high-performance concrete, Cement and Concrete Research, vol.31, issue.11, pp.1525-1532, 2001.
DOI : 10.1016/S0008-8846(01)00546-4
URL : https://hal.archives-ouvertes.fr/hal-01006773

C. S. Poon, S. Azhar, M. Anson, and Y. L. Wong, Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures, Cement and Concrete Research, vol.31, issue.9, pp.1291-1300, 2001.
DOI : 10.1016/S0008-8846(01)00580-4

C. S. Poon, S. Azhar, M. Anson, and Y. L. Wong, Performance of metakaolin concrete at elevated temperatures, Cement and Concrete Composite, pp.83-89, 2003.
DOI : 10.1016/S0958-9465(01)00061-0

T. C. Powers and T. L. Brownyard, Studies of the physical properties of hardened Portland cement paste, ACI Journal, vol.43, pp.47-48, 1946.

T. C. Powers and T. L. Brownyard, Studies of the physical properties of hardened cement paste, 1947.

D. Quénard and H. Sallée, Le transfert isotherme de la vapeur d'eau condensable dans les matériaux microporeux du bâtiment, 1991.

. Sam, H. R. Samaha, and K. C. Hover, Influence of microcracking on the mass transport properties of concrete, ACI Mater J, vol.89, pp.416-424, 1992.

E. Sancak, D. Y. Sari, and O. Simsek, Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and superplasticizer, Cement and Concrete Composites, pp.715-721, 2008.
DOI : 10.1016/j.cemconcomp.2008.01.004

R. Sarchar and G. A. Khoury, Materials and environmental factors influencing the compressive strength of unsealed cement paste and concrete at high temperatures. Magazine of Concrete Research, pp.51-61, 1993.

]. K. Scrivener, A. K. Crumbie, and P. , The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete, Interface Science, vol.12, issue.4, pp.411-421, 2004.
DOI : 10.1023/B:INTS.0000042339.92990.4c

C. K. Seng and M. H. Zhang, Water permeability and chloride penetrability of high-strength lightweight aggregate concrete, Cement and Concrete Research, vol.32, pp.639-645, 2002.

S. P. Shah and R. Sankar, Internal cracking and strain softening response of concrete under uni-axial compression, 1987.

M. Shekarchi, G. Debicki, and P. Clastres, Perméabilité du béton à l'oxygène ? Influence de la fumée de silice, influence de la température, Compte rendu des journées techniques « AFPC-AFREM, Durabilité des bétons : méthodes recommandées pour la mesure des grandeurs associées à la durabilité. »Toulouse, pp.197-206, 1997.

. Schneider-u and . J. Herbst-h, Porosity values for concrete, TIZ Révue Allemande, vol.113, pp.311-321, 1989.

L. S. Sofren and T. Horiguchi, Effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition, Cement and Concrete Research, vol.36, pp.1672-1678, 2006.

J. J. Thomas, H. M. Jennings, and A. J. Allen, The surface area of hardened cement paste as measured by various techniques, Concrete Science and Engineering, vol.1, pp.45-64, 1999.

F. Ulm, P. Acker, and M. Levy, « Incendie dans le tunnel sous la Manche : analyse mécanique de l'écaillage du béton ». Revue française de génie civil, pp.315-339, 1998.
DOI : 10.1080/12795119.1998.9692170

F. Ulm, P. Acker, and M. Et-levy, The ???Chunnel??? Fire.???II: Analysis of Concrete Damage, Journal of Engineering Mechanics, vol.125, issue.3, pp.283-289, 1999.
DOI : 10.1061/(ASCE)0733-9399(1999)125:3(283)
URL : https://hal.archives-ouvertes.fr/hal-00586628

F. J. Ulm, O. Coussy, and Z. P. Bazant, The ???Chunnel??? Fire. I: Chemoplastic Softening in Rapidly Heated Concrete, Journal of Engineering Mechanics, vol.125, issue.3, pp.272-282, 1999.
DOI : 10.1061/(ASCE)0733-9399(1999)125:3(272)
URL : https://hal.archives-ouvertes.fr/hal-00586628

G. Villain, V. Baroghel-bouny, C. Kounkou, and C. Hua, Mesure de la perm??abilit?? aux gaz en fonction du taux de saturation des b??tons, Revue Fran??aise de G??nie Civil, vol.22, issue.2-3, pp.2-3, 2001.
DOI : 10.1080/12795119.2001.9692306

F. Vodák, K. Trtík, O. Kapicková, S. Hosková, and P. Demo, The effect of temperature on strength ??? porosity relationship for concrete, Construction and Building Materials, vol.18, issue.7, pp.529-534, 2004.
DOI : 10.1016/j.conbuildmat.2004.04.009

J. Xiao and H. Falkner, On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures, Fire Safety Journal, vol.41, issue.2, pp.115-121, 2006.
DOI : 10.1016/j.firesaf.2005.11.004

M. Zeiml, D. Leithner, R. Lackner, A. Herbert, and . Mang, How do polypropylene fibers improve the spalling behavior of in-situ concrete? Cement and concrete research, pp.929-942, 2006.

M. Zeiml, R. Lackner, D. Leithner, and J. Eberharsteiner, Identification of residual gas-transport properties of concrete subjected to high temperatures, Cement and Concrete Research, vol.38, issue.5, pp.699-716, 2008.
DOI : 10.1016/j.cemconres.2008.01.005