N. R. Washburn, C. G. Simon, A. Tona, H. M. Elgendy, A. Karim et al., Co extrusion of biocompatible polymers for scaffolds with co-continuous morphology Smooth muscle cell adhesion in surfacemodified three-dimensional copolymer scaffolds prepared from co-continuous blends Thin-film membranes derived from co-continuous polymer blends: preparation and performance What Are Batteries, Fuel Cells, and Supercapacitors?, GIEC / IPCC -Intergovernmental Panel on Climate Change Synthetic Membranes and Membrane Separation Processes Investigations on Storage Technologies for Intermittent Renewable Energies: Evaluation and recommended R&D strategy, " Investire-Network. [Online], pp.20-29, 1993.

. Available, Battery Separators Pile à combustible GENEPAC, Chemical Reviews, vol.104, pp.4419-4462, 2004.

J. Pluchet and P. Destruel, Etat de la R&D dans le domaine des batteries pour véhicules électriques au Japon, 2001.

S. Raël, B. Davat, and F. Belhachemi, Supercondensateurs à couche double électrique : principes de fonctionnement et comportement électrique, 2002.

A. Burke, Ultracapacitors: why, how, and where is the technology, Journal of Power Sources, vol.91, issue.1, pp.37-50, 2000.
DOI : 10.1016/S0378-7753(00)00485-7

B. E. Conway, Electrochemical supercapacitors : scientific fundamentals and technological applications, 1999.
DOI : 10.1007/978-1-4757-3058-6

. Celgard, Polypropylene Membrane Available: http://www.celgard.com/products/default.asp. [Accessed: 04, 2011.

H. Lewis, C. Grun, and A. Salkind, Cellulosic separator applications: new and improved separators for alkaline rechargeable cells, Journal of Power Sources, vol.65, issue.1-2, pp.29-38
DOI : 10.1016/S0378-7753(96)02650-X

I. Kuribayashi, Characterization of composite cellulosic separators for rechargeable lithium-ion batteries, Journal of Power Sources, vol.63, issue.1, pp.87-91, 1996.
DOI : 10.1016/S0378-7753(96)02450-0

V. L. Pushparaj, Flexible energy storage devices based on nanocomposite paper, Proceedings of the National Academy of Sciences, pp.13574-13577, 2007.
DOI : 10.1073/pnas.0706508104

D. Hou, J. Wang, D. Qu, Z. Luan, and X. Ren, Fabrication and characterization of hydrophobic PVDF hollow fiber membranes for desalination through direct contact membrane distillation, Separation and Purification Technology, vol.69, issue.1, pp.78-86, 2009.
DOI : 10.1016/j.seppur.2009.06.026

K. Karakulski, W. A. Morawski, and J. Grzechulska, Purification of bilge water by hybrid ultrafiltration and photocatalytic processes, Separation and Purification Technology, vol.14, issue.1-3, pp.163-173, 1998.
DOI : 10.1016/S1383-5866(98)00071-9

Y. Yampolskii, I. Pinnau, and B. D. Freeman, Materials science of membranes for gas and vapor separation, 2006.
DOI : 10.1002/047002903X

N. Yuan, R. Tsai, M. Ho, D. Wang, J. Lai et al., Fabrication and characterization of chondroitin sulfate-modified chitosan membranes for biomedical applications, Desalination, vol.234, issue.1-3, pp.166-174, 2008.
DOI : 10.1016/j.desal.2007.09.083

G. Bayramo?lu and M. Y. Ar?ca, A novel pH sensitive porous membrane carrier for various biomedical applications based on pHEMA/chitosan: preparation and its drug release characteristics, Macromolecular Symposia, pp.213-218, 2003.
DOI : 10.1002/masy.200351321

O. W. Reif, Microfiltration Membranes: Characteristics and Manufacturing, Advances In Biochemical Engineering/Biotechnology, 2006.
DOI : 10.1007/b104245

M. Advantec and . Inc, Coated Cellulose Acetate Membrane Filters

D. Karabelli, Les électrolytes à séparateur PVdF macroporeux pour batteries au lithium et supercondensateurs, 2011.

D. R. Lloyd, K. E. Kinzer, and H. S. Tseng, Microporous membrane formation via thermally induced phase separation. I. Solid-liquid phase separation, Journal of Membrane Science, vol.52, issue.3, pp.239-261, 1990.
DOI : 10.1016/S0376-7388(00)85130-3

C. A. Smolders, A. J. Reuvers, R. M. Boom, and I. M. Wienk, Microstructures in phase-inversion membranes. Part 1. Formation of macrovoids, Journal of Membrane Science, vol.73, issue.2-3, pp.259-275, 1992.
DOI : 10.1016/0376-7388(92)80134-6

S. Ramaswamy, A. R. Greenberg, and W. B. Krantz, Fabrication of poly (ECTFE) membranes via thermally induced phase separation, Journal of Membrane Science, vol.210, issue.1, pp.175-180, 2002.
DOI : 10.1016/S0376-7388(02)00383-6

D. Lin, C. Chang, C. Lee, and L. Cheng, Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutions, European Polymer Journal, vol.42, issue.10, pp.2407-2418, 2006.
DOI : 10.1016/j.eurpolymj.2006.05.008

S. Rajabzadeh, T. Maruyama, T. Sotani, and H. Matsuyama, Preparation of PVDF hollow fiber membrane from a ternary polymer/solvent/nonsolvent system via thermally induced phase separation (TIPS) method, Separation and Purification Technology, vol.63, issue.2, pp.415-423, 2008.
DOI : 10.1016/j.seppur.2008.05.027

G. Ji, B. Zhu, Z. Cui, C. Zhang, and Y. Xu, PVDF porous matrix with controlled microstructure prepared by TIPS process as polymer electrolyte for lithium ion battery, Polymer, vol.48, issue.21, pp.6415-6425, 2007.
DOI : 10.1016/j.polymer.2007.08.049

Z. Cui, Y. Xu, L. Zhu, J. Wang, Z. Xi et al., Preparation of PVDF/PEO-PPO-PEO blend microporous membranes for lithium ion batteries via thermally induced phase separation process, Journal of Membrane Science, vol.325, issue.2, pp.957-963, 2008.
DOI : 10.1016/j.memsci.2008.09.022

C. Zhen-yu, X. You-yi, Z. Li-ping, W. Jian-yu, and Z. Bao-ku, Investigation on PVDF-HFP microporous membranes prepared by TIPS process and their application Références bibliographiques-3

G. C. Li, P. Zhang, H. P. Zhang, L. C. Yang, and Y. P. Wu, A porous polymer electrolyte based on P(VDF-HFP) prepared by a simple phase separation process, Electrochemistry Communications, vol.10, issue.12, pp.1883-1885, 2008.
DOI : 10.1016/j.elecom.2008.09.035

E. Reverchon and S. Cardea, Processing:?? Elucidation of Formation Mechanisms, Industrial & Engineering Chemistry Research, vol.45, issue.26, pp.8939-8945, 2006.
DOI : 10.1021/ie051396w

H. Matsuyama, H. Yano, T. Maki, M. Teramoto, K. Mishima et al., Formation of porous flat membrane by phase separation with supercritical CO2, Journal of Membrane Science, vol.194, issue.2, pp.157-163, 2001.
DOI : 10.1016/S0376-7388(01)00436-7

J. Zeleny, The Electrical Discharge from Liquid Points, and a Hydrostatic Method of Measuring the Electric Intensity at Their Surfaces, Physical Review, vol.3, issue.2, pp.69-91, 1914.
DOI : 10.1103/PhysRev.3.69

S. Y. Chew, J. Wen, E. K. Yim, and K. W. Leong, Sustained Release of Proteins from Electrospun Biodegradable Fibers, Biomacromolecules, vol.6, issue.4, pp.2017-2024, 2005.
DOI : 10.1021/bm0501149

. Qi, Encapsulation of Drug Reservoirs in Fibers by Emulsion Electrospinning:?? Morphology Characterization and Preliminary Release Assessment, Biomacromolecules, vol.7, issue.8, pp.2327-2330, 2006.
DOI : 10.1021/bm060264z

Y. Feng, F. Meng, R. Xiao, H. Zhao, and J. Guo, Electrospinning of polycarbonate urethane biomaterials, Frontiers of Chemical Science and Engineering, vol.54, issue.3???4, 2010.
DOI : 10.1007/s11705-010-1011-x

. Okuyama, Nanoparticle filtration by electrospun polymer fibers, Chemical Engineering Science, vol.62, issue.17, pp.4751-4759, 2007.

Z. Dong, S. J. Kennedy, and Y. Wu, Electrospinning materials for energy-related applications and devices, Press, Corrected Proof. Références bibliographiques, p.4
DOI : 10.1016/j.jpowsour.2011.01.090

A. R. Priya, A. Subramania, Y. Jung, and K. Kim, High-Performance Quasi-Solid-State Dye-Sensitized Solar Cell Based on an Electrospun PVdF???HFP Membrane Electrolyte, Langmuir, vol.24, issue.17, pp.9816-9819, 2008.
DOI : 10.1021/la801375s

S. Lee, Developing UV-protective textiles based on electrospun zinc oxide nanocomposite fibers, Fibers and Polymers, vol.14, issue.3, pp.295-301, 2009.
DOI : 10.1007/s12221-009-0295-2

J. A. Kent and E. , Kent and Riegel's Handbook of Industrial Chemistry and Biotechnology, 2007.
DOI : 10.1007/978-0-387-27843-8

G. H. Kirby, T. R. Armstrong, and B. L. Armstrong, Economic Fabrication of Membrane Materials

S. Ravati and B. D. Favis, 3D porous polymeric conductive material prepared using LbL deposition, Polymer, vol.52, issue.3, pp.718-731, 2011.
DOI : 10.1016/j.polymer.2010.12.005

P. Pötschke and D. R. Paul, Formation of Co-continuous Structures in Melt-Mixed Immiscible Polymer Blends, Journal of Macromolecular Science, Part C: Polymer Reviews, vol.37, issue.1, p.87, 2003.
DOI : 10.1002/masy.19900380105

J. Lyngaae-jorgensen, K. L. Rasmussen, E. A. Chtcherbakova, and L. A. Utracki, Flow induced deformation of dual-phase continuity in polymer blends and alloys

L. A. Utracki, On the viscosity???concentration dependence of immiscible polymer blends, Journal of Rheology, vol.35, issue.8, p.1615, 1991.
DOI : 10.1122/1.550248

G. I. Taylor, The Formation of Emulsions in Definable Fields of Flow, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.146, issue.858, pp.501-523, 1934.
DOI : 10.1098/rspa.1934.0169

G. I. Taylor, The Viscosity of a Fluid Containing Small Drops of Another Fluid, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.138, issue.834, pp.41-48, 1932.
DOI : 10.1098/rspa.1932.0169

H. Grace and ?. , DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS, Chemical Engineering Communications, vol.10, issue.3-6, pp.225-277, 1982.
DOI : 10.1002/aic.690150512

R. A. De-bruijn, Deformation and break?up in simple shear flows, 1989.

N. Tokita, Analysis of Morphology Formation in Elastomer Blends, Rubber Chemistry and Technology, vol.50, issue.2, pp.292-300, 1977.
DOI : 10.5254/1.3535144

B. D. Favis, Polymer alloys and blends: Recent advances, The Canadian Journal of Chemical Engineering, vol.28, issue.3, pp.619-625, 1991.
DOI : 10.1002/cjce.5450690303

J. J. Elmendorp, A. K. Van-der, and . Vegt, A study on polymer blending microrheology: Part IV. The influence of coalescence on blend morphology origination, Polymer Engineering and Science, vol.47, issue.19, pp.1332-1338, 1986.
DOI : 10.1002/pen.760261908

U. Sundararaj and C. W. Macosko, Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization, Macromolecules, vol.28, issue.8, pp.2647-2657, 1995.
DOI : 10.1021/ma00112a009

I. Fortelny and J. Kovar, Theory of coalescence in immiscible polymer blends, Polymer Composites, vol.132, issue.2, pp.119-124, 1988.
DOI : 10.1002/pc.750090204

G. Serpe, J. Jarrin, and F. Dawans, Morphology-processing relationships in polyethylene-polyamide blends, Polymer Engineering and Science, vol.26, issue.9, pp.553-565, 1990.
DOI : 10.1002/pen.760300908

T. Jansseune, J. Mewis, P. Moldenaers, M. Minale, and P. L. Maffettone, Rheology and rheological morphology determination in immiscible two-phase polymer model blends, Journal of Non-Newtonian Fluid Mechanics, vol.93, issue.1, pp.153-165, 2000.
DOI : 10.1016/S0377-0257(00)00109-9

J. He, W. Bu, and J. Zeng, Co-phase continuity in immiscible binary polymer blends, Polymer, vol.38, issue.26, pp.6347-6353, 1997.
DOI : 10.1016/S0032-3861(97)00212-7

W. Bu and J. He, The effect of mixing time on the morphology of immiscible polymer blends, Journal of Applied Polymer Science, vol.62, issue.9, pp.1445-1456, 1996.
DOI : 10.1002/(SICI)1097-4628(19961128)62:9<1445::AID-APP14>3.0.CO;2-Y

P. Sarazin and B. D. Favis, Stability of the co-continuous morphology during melt mixing for poly(??-caprolactone)/polystyrene blends, Journal of Polymer Science Part B: Polymer Physics, vol.43, issue.7
DOI : 10.1002/polb.21078

J. K. Lee and C. D. Han, Evolution of polymer blend morphology during compounding in an internal mixer, Polymer, vol.40, issue.23, pp.6277-6296, 1999.
DOI : 10.1016/S0032-3861(99)00022-1

C. H. Arns, M. A. Knackstedt, A. P. Roberts, and V. W. Pinczewski, Morphology, Cocontinuity, and Conductive Properties of Anisotropic Polymer Blends, Morphology, Cocontinuity, and Conductive Properties of Anisotropic Polymer Blends, pp.5964-5966, 1999.
DOI : 10.1021/ma981476u

H. Verhoogt, J. Van-dam, A. P. De-boer, A. Draaijer, and P. M. Houpt, Confocal laser scanning microscopy: a new method for determination of the morphology of polymer blends, Polymer, vol.34, issue.6, pp.1325-1329, 1993.
DOI : 10.1016/0032-3861(93)90795-C

M. Steffens, M. Falter, M. Bäcker, and C. Oligschleger, AFM investigations of the surface morphology of buffer layers for all-chemical solution coated conductors, Journal of Physics: Conference Series, vol.97, p.12165, 2008.
DOI : 10.1088/1742-6596/97/1/012165

A. H. Tsou and W. H. Waddell, Morphology of Elastomer Blends by Dynamic AFM, KGK. Kautschuk, Gummi, Kunststoffe, vol.55, issue.78, pp.382-387, 2002.

S. Park, Atomic force microscopy study of surface morphology of GaAs grown by atomic layer epitaxy using trimethylgallium and arsine, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.12, issue.3, p.1623, 1994.
DOI : 10.1116/1.587246

C. Z. Chuai, K. Almdal, and J. Lyngaae-jørgensen, Phase continuity and inversion in polystyrene/poly(methyl methacrylate) blends, Polymer, vol.44, issue.2, pp.481-493, 2003.
DOI : 10.1016/S0032-3861(02)00632-8

S. Brunauer, P. H. Emmett, and E. Teller, Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society, vol.60, issue.2, pp.309-319, 1938.
DOI : 10.1021/ja01269a023

I. Langmuir, The constitution and fundamental properties of solids and liquids, Journal of the Franklin Institute, vol.183, issue.1
DOI : 10.1016/S0016-0032(17)90938-X

K. Dedecker and G. Groeninckx, Reactive compatibilisation of A/(B/C) polymer blends. Part 2. Analysis of the phase inversion region and the co-continuous phase morphology, Polymer, vol.39, issue.21, pp.4993-5000, 1998.
DOI : 10.1016/S0032-3861(97)10089-1

W. A. Heeschen, A quantitative image analysis method for the determination of cocontinuity in polymer blends, Polymer, vol.36, issue.9, pp.1835-1841, 1995.
DOI : 10.1016/0032-3861(95)90929-V

J. Huitric, P. Médéric, M. Moan, and J. Jarrin, Influence of composition and morphology on rheological properties of polyethylene/polyamide blends, Polymer, vol.39, issue.20, pp.4849-4856, 1998.
DOI : 10.1016/S0032-3861(97)10255-5

M. Castro, C. Carrot, and F. Prochazka, Experimental and theoretical description of low frequency viscoelastic behaviour in immiscible polymer blends, Polymer, vol.45, issue.12, pp.4095-4104, 2004.
DOI : 10.1016/j.polymer.2004.04.019
URL : https://hal.archives-ouvertes.fr/hal-00454912

M. Castro, F. Prochazka, and C. Carrot, Cocontinuity in immiscible polymer blends: A gel approach, Journal of Rheology, vol.49, issue.1, p.149, 2005.
DOI : 10.1122/1.1835341
URL : https://hal.archives-ouvertes.fr/hal-00454997

S. Steinmann, W. Gronski, and C. Friedrich, Cocontinuous polymer blends: influence of viscosity and elasticity ratios of the constituent polymers on phase inversion, Polymer, vol.42, issue.15, pp.6619-6629, 2001.
DOI : 10.1016/S0032-3861(01)00100-8

S. Steinmann, W. Gronski, and C. Friedrich, Quantitative rheological evaluation of phase inversion in two-phase polymer blends with cocontinuous morphology, Rheologica Acta, vol.41, issue.1-2, pp.77-86, 2002.
DOI : 10.1007/s003970200007

J. Bonnet, Polymères Fluorés, 2004.

C. Heitner-wirguin, Recent advances in perfluorinated ionomer membranes: structure, properties and applications, Journal of Membrane Science, vol.120, issue.1, pp.1-33, 1996.
DOI : 10.1016/0376-7388(96)00155-X

M. Lopez, B. Kipling, and H. L. Yeager, Ionic diffusion and selectivity of a cation exchange membrane in nonaqueous solvents, Analytical Chemistry, vol.49, issue.4, pp.629-632, 1977.
DOI : 10.1021/ac50012a031

M. Castro, Contrôle de la morphologie d un mélange de polymères lors de l'extrusion ? de films : application aux batteries lithium -polymère

R. Y. Ting and R. C. Little, Characterization of drag reduction and degradation effects in the turbulent pipe flow of dilute polymer solutions, Journal of Applied Polymer Science, vol.17, issue.11, pp.3345-3356, 1973.
DOI : 10.1002/app.1973.070171109

S. Brouillet-fourmann, C. Carrot, N. Mignard, and F. Prochazka, On the use of an internal mixer for the rheological characterization of maize starch, Applied Rheology, vol.12, issue.4, pp.192-199, 2002.

A. Bottino, G. Capannelli, S. Munari, and A. Turturro, Solubility parameters of poly(vinylidene fluoride), Journal of Polymer Science Part B: Polymer Physics, vol.26, issue.4, pp.785-794, 1988.
DOI : 10.1002/polb.1988.090260405

E. H. Kerner, The Elastic and Thermo-elastic Properties of Composite Media, Proceedings of the Physical Society. Section B, vol.69, issue.8, pp.808-813, 1956.
DOI : 10.1088/0370-1301/69/8/305

J. F. Palierne, Linear rheology of viscoelastic emulsions with interfacial tension, Rheologica Acta, vol.27, issue.3, p.8
DOI : 10.1007/BF01331356

H. M. Lee and O. O. Park, Rheology and dynamics of immiscible polymer blends, Journal of Rheology, vol.38, issue.5, pp.1405-1425, 1994.
DOI : 10.1122/1.550551

D. Owens and R. Wendt, Estimation of the surface free energy of polymers, Journal of Applied Polymer Science, vol.13, issue.8, pp.1741-1747, 1969.
DOI : 10.1002/app.1969.070130815

D. Kaelble, Dispersion-Polar Surface Tension Properties of Organic Solids, The Journal of Adhesion, vol.2, issue.2, pp.66-81, 1970.
DOI : 10.1002/app.1967.070111118

R. J. Roe, Surface tension of polymer liquids, The Journal of Physical Chemistry, vol.72, issue.6, pp.2013-2017, 1968.
DOI : 10.1021/j100852a025

S. Wu, Calculation of interfacial tension in polymer systems, Part C: Polymer Symposia, C34, pp.19-30, 1971.
DOI : 10.1002/polc.5070340105

H. Schonhorn and F. W. Ryan, Sharpe LH. Surface tension of a molten polychlorotrifluoroethylene, Journal of Polymer Science Polymer Physics, vol.4, issue.3, pp.538-542, 1966.

B. D. Favis and J. P. Chalifoux, The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing, Polymer Engineering and Science, vol.23, issue.21, pp.1591-1600, 1987.
DOI : 10.1002/pen.760272105

V. Everaert, L. Aerts, and G. Groeninckx, Phase morphology development in immiscible PP/(PS/PPE) blends influence of the melt-viscosity ratio and blend composition, Polymer, vol.40, issue.24, pp.6627-6644, 1999.
DOI : 10.1016/S0032-3861(99)00048-8

L. Dumas, Post-modification par irradiation de séparateurs macroporeux ? Application Supercondensateur, Institut National des Sciences Appliquées de, 2011.

S. Rouif, Modification physico-chimiques des polymères par ionisation, 2008.

S. Rouif, Modification des polymères par irradiation : réticulation et radiogreffage, p.9