Applications of electronic noses and tongues in food analysis, International Journal of Food Science and Technology, vol.9, issue.6, pp.587-604, 2004. ,
DOI : 10.1016/S0003-2670(99)00767-9
Electronic noses, Int. J. Food Sci. Technol, vol.54, issue.3, pp.96-98, 2000. ,
Safeguarding The Security Of Public Water Supplies Using Early Warning Systems: A Brief Review, Journal of Contemporary Water Research & Education, vol.96, issue.1, pp.27-33, 2004. ,
DOI : 10.1111/j.1936-704X.2004.mp129001007.x
Online and in situ monitoring of environmental pollutants: electrochemical biosensing of cadmium, Environmental Microbiology, vol.22, issue.3, pp.285-290, 2000. ,
DOI : 10.1016/S0956-5663(98)00027-X
Chemical sensors, pp.1-2, 1997. ,
Surface-launched Acoustic Wave Sensors, pp.15-25, 1997. ,
Excitation of non-radiative surface plasma waves by the method of frustrated total reflection, Z. Physik, pp.216-398, 1968. ,
Identification of the Optimal Spectral Region for Plasmonic and Nanoplasmonic Sensing, ACS Nano, vol.4, issue.1, pp.349-357, 2009. ,
DOI : 10.1021/nn901024e
Supersensitive detection of T-2 toxin by the in situ synthesized ??-conjugated molecularly imprinted nanopatterns. An in situ investigation by surface plasmon resonance combined with electrochemistry, Biosensors and Bioelectronics, vol.26, issue.5, pp.2534-2540, 2011. ,
DOI : 10.1016/j.bios.2010.10.050
Développement d'un système optique d'imagerie en résonance de plasmons de surface pour l'analyse simultanée de multiples interactions biomoléculaires en temps réel, 2004. ,
Verwendung von Schwingquarzen zur W???gung d???nner Schichten und zur Mikrow???gung, Zeitschrift f???r Physik, vol.155, issue.2, pp.206-222, 1959. ,
DOI : 10.1007/BF01337937
Characterization of films immobilized on an electrode surface using the electrochemical quarz crystal microbalance, Bionanalytical Systems, INC. Current Separations, vol.18, p.3, 1999. ,
Measurement of interfacial processes at electrode surfaces with the electrochemical quartz crystal microbalance, Chemical Reviews, vol.92, issue.6, pp.1355-11379, 1992. ,
DOI : 10.1021/cr00014a006
Acoustic Wave Microsensors, Analytical Chemistry, vol.65, issue.21 ,
DOI : 10.1021/ac00069a728
Les capteurs en instrumentation industrielle, pp.749-772, 1998. ,
Carrier-Based Ion-Selective Electrodes and Bulk Optodes. 1. General Characteristics, Chemical Reviews, vol.97, issue.8, pp.3083-3132, 1997. ,
DOI : 10.1021/cr940394a
Carrier-Based Ion-Selective Electrodes and Bulk Optodes. 2. Ionophores for Potentiometric and Optical Sensors, Chemical Reviews, vol.98, issue.4, pp.1593-1687, 1998. ,
DOI : 10.1021/cr970113+
Novel potentiometric sensor for monitoring barium(II) based on 2, Sensors and Actuators B, vol.341357, issue.106 2, pp.12-15, 2005. ,
Coated-wire electrodes containing polymer immobilized ionophores blended with poly(vinyl chloride), Talanta, vol.41, issue.9, pp.1589-1596, 1994. ,
DOI : 10.1016/0039-9140(94)E0075-3
Development of an Ion-Sensitive Solid-State Device for Neurophysiological Measurements, IEEE Transactions on Biomedical Engineering, vol.17, issue.1, pp.70-71, 1970. ,
DOI : 10.1109/TBME.1970.4502688
Thermometric MIP sensor for fructosyl valine, Biosensors and Bioelectronics, vol.23, issue.7, pp.1195-1199, 2008. ,
DOI : 10.1016/j.bios.2007.09.015
Principles of chemical sensors, 2009. ,
DOI : 10.1007/978-1-4757-6257-0
Functionalized Conducting Polymers???Towards Intelligent Materials, Angewandte Chemie, vol.28, issue.4, pp.529-533, 1989. ,
DOI : 10.1002/ange.19891010447
in Hand book of conducting polymers, 3ed, Boca Raton, pp.2-3, 2007. ,
Chemical derivatization of an array of three gold microelectrodes with polypyrrole: fabrication of a molecule based transistor, J. Am. Chem. Soc, vol.106, p.18, 1984. ,
Optical Sensors Based on Hybrid Aptamer/Conjugated Polymer Complexes, Journal of the American Chemical Society, vol.126, issue.5, pp.1384-1387, 2004. ,
DOI : 10.1021/ja037289f
in Hand book of conducting polymers, 3ed, Boca Raton, pp.7-9, 2007. ,
Potentiometric sensors for Ag+ based on poly(3-octylthiophene) (POT), Journal of Solid State Electrochemistry, vol.241, issue.12, pp.865-873, 2005. ,
DOI : 10.1007/s10008-005-0031-9
Response mechanism of potentiometric Ag+ sensor based on poly(3,4-ethylenedioxythiophene) doped with silver hexabromocarborane, Journal of Electroanalytical Chemistry, vol.593, issue.1-2, pp.219-226, 2006. ,
DOI : 10.1016/j.jelechem.2006.04.022
A potentiometric and voltammetric sensor based on polypyrrole film with electrochemically induced recognition sites for detection of silver ion, Electrochimica Acta, vol.52, issue.11, pp.3822-3830, 2007. ,
DOI : 10.1016/j.electacta.2006.10.055
Accumulation of Cu(II) cations in poly(3,4-ethylenedioxythiophene) films doped by hexacyanoferrate anions and its application in Cu2+-selective electrodes with PVC based membranes, Electrochimica Acta, vol.51, issue.11, pp.2298-2305, 2006. ,
DOI : 10.1016/j.electacta.2005.03.080
Characterization of an EDTA Bonded Conducting Polymer Modified Electrode:?? Its Application for the Simultaneous Determination of Heavy Metal Ions, Analytical Chemistry, vol.75, issue.5, pp.1123-1129, 2003. ,
DOI : 10.1021/ac0262917
Complexation of poly(pyrrole-EDTA like) film modified electrodes: Application to metal cations electroanalysis, Electrochimica Acta, vol.52, issue.9, p.3082, 2007. ,
DOI : 10.1016/j.electacta.2006.09.041
Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes, Journal of Solid State Electrochemistry, vol.364, issue.5, pp.312-319, 2005. ,
DOI : 10.1007/s10008-004-0597-7
EQCM analysis of the alkali metal ion coordination properties of novel poly(thiophene)s 3,4-functionalized with crown-ether moieties, Synthetic Metals, vol.131, issue.1-3, pp.149-161, 2002. ,
DOI : 10.1016/S0379-6779(02)00176-5
Conducting polymers in chemical sensors and arrays, Analytica Chimica Acta, vol.614, issue.1, pp.1-26, 2008. ,
DOI : 10.1016/j.aca.2008.02.068
Voltammetric detection of NO in the rat brain with an electronic conducting polymer and Nafion?? bilayer-coated carbon fibre electrode, Journal of Electroanalytical Chemistry, vol.426, issue.1-2 ,
DOI : 10.1016/S0022-0728(96)04985-6
Fabrication and characterization of polyaniline-based gas sensor by ultra-thin film technology, Sensors and Actuators B: Chemical, vol.81, issue.2-3, pp.158-164, 2002. ,
DOI : 10.1016/S0925-4005(01)00946-7
NO2 gas sensing based on ordered ultrathin films of conducting polymer and its nanocomposite, Synthetic Metals, vol.151, issue.1, pp.77-84, 2005. ,
DOI : 10.1016/j.synthmet.2005.03.021
Electrical conductivity response of dodecylbenzene sulfonic acid-doped polypyrrole films to SO2???N2 mixtures, Synthetic Metals, vol.114, issue.1, pp.65-72, 2000. ,
DOI : 10.1016/S0379-6779(00)00230-7
CO gas sensing from ultrathin nano-composite conducting polymer film, Sens. Actuators B, vol.106, pp.750-757, 2005. ,
Ammonia gas sensor based on electrosynthesized polypyrrole films, Talanta, vol.78, issue.1, pp.199-206, 2009. ,
DOI : 10.1016/j.talanta.2008.10.056
URL : https://hal.archives-ouvertes.fr/hal-00362537
Conductive Polymer Films as Ultrasensitive Chemical Sensors for Hydrazine and Monomethylhydrazine Vapor, Analytical Chemistry, vol.68, issue.5 ,
DOI : 10.1021/ac950662k
Polyaniline Nanofibre Gas Sensors : Examination of response Mechanisms, Nano Lett, vol.3, pp.491-496, 2004. ,
Inkjet printed chemical sensor array based on polythiophene conductive polymers, Sensors and Actuators B: Chemical, vol.123, issue.2, pp.651-660, 2007. ,
DOI : 10.1016/j.snb.2006.09.064
Simultaneous determination of dopamine and ascorbic acid on poly (3,4-ethylenedioxythiophene) modified glassy carbon electrode, Journal of Solid State Electrochemistry, vol.54, issue.11, pp.905-913, 2006. ,
DOI : 10.1007/s10008-005-0041-7
Electrochemical sensors based on platinum electrodes modified with hybrid inorganic???organic coatings for determination of 4-nitrophenol and dopamine, Electrochimica Acta, vol.54, issue.7, 1932. ,
DOI : 10.1016/j.electacta.2008.07.051
A novel electrochemical synthesis of poly-3-methylthiophene-??-cyclodextrin film???Application for the analysis of chlorpromazine and some neurotransmitters, Biosensors and Bioelectronics, vol.20, issue.11, pp.2228-59, 2005. ,
DOI : 10.1016/j.bios.2004.12.004
Electrosynthesis and analytical performances of functionalized poly (pyrrole/??-cyclodextrin) films, Talanta, vol.66, issue.1, pp.111-117, 2005. ,
DOI : 10.1016/j.talanta.2004.10.003
Electrochemistry of Cyclodextrin Inclusion Complexes of Pharmaceutical Compounds, The Open Chemical and Biomedical Methods Journal, pp.74-85, 2010. ,
Changes of Poly(aniline boronic acid), Journal of the American Chemical Society, vol.124, issue.42, pp.12486-12493, 2002. ,
DOI : 10.1021/ja0267371
pH Dependent Equilibria of Poly(anilineboronic acid)-Saccharide Complexation in Thin Films, Macromolecular Chemistry and Physics, vol.25, issue.7, pp.660-664, 2006. ,
DOI : 10.1002/macp.200500560
Towards a Conducting Polymer-based Electronic Nose and Electronic Tongue, Iranian Polymer Journal, vol.9, issue.3, 2000. ,
Applications of electronic noses and tongues in food analysis, International Journal of Food Science and Technology, vol.9, issue.6, pp.587-604, 2004. ,
DOI : 10.1016/S0003-2670(99)00767-9
Molecular Imprinting of Synthetic Network Polymers: The De Novo Synthesis of Macromolecular Binding and Catalytic Sites, Trends in Polymer Science, vol.2, pp.166-173, 1994. ,
Molecular Imprinting in Cross-Linked Materials with the Aid of Molecular Templates??? A Way towards Artificial Antibodies, Angewandte Chemie International Edition in English, vol.34, issue.17, pp.1812-1832, 1995. ,
DOI : 10.1002/anie.199518121
The Emerging Technique of Molecular Imprinting and Its Future Impact on Biotechnology, Bio/Technology, vol.2, issue.2, pp.163-170, 1996. ,
DOI : 10.1002/anie.198816951
Molecularly Imprinted Polymers and Their Use in Biomimetic Sensors, Chemical Reviews, vol.100, issue.7, pp.2495-2504, 2000. ,
DOI : 10.1021/cr990099w
Polymers in sensor applications, Progress in Polymer Science, vol.29, issue.7, pp.699-766, 2004. ,
DOI : 10.1016/j.progpolymsci.2004.03.002
Experimental study of the remediation of atrazine contaminated soils through soil extraction and subsequent peroxidation, Journal of Hazardous Materials, vol.99, issue.3, pp.265-276, 2003. ,
DOI : 10.1016/S0304-3894(02)00288-1
Determination of atrazine and simazine in environmental water samples using multiwalled carbon nanotubes as the adsorbents for preconcentration prior to high performance liquid chromatography with diode array detector, Talanta, vol.68, issue.4, pp.1309-1315, 2006. ,
DOI : 10.1016/j.talanta.2005.07.050
Capillary Enzyme Immunoassay with Electrochemical Detection for the Determination of Atrazine in Water, Journal of Agricultural and Food Chemistry, vol.43, issue.4, pp.1098-1104, 1995. ,
DOI : 10.1021/jf00052a044
Flow-injection immunosensor for triazine herbicides using Eu(III) chelate label fluorescence detection, Analytica Chimica Acta, vol.289, issue.2, pp.177-186, 1994. ,
DOI : 10.1016/0003-2670(94)80101-0
Label-free impedimetric immunosensor for sensitive detection of atrazine, Electrochimica Acta, vol.55, issue.21, pp.6228-6232, 2010. ,
DOI : 10.1016/j.electacta.2009.11.029
Aryl diazonium salt surface chemistry and ATRP for the preparation of molecular imprinted polymer grafts on gold substrates, Surf. Interface Anal, vol.42, pp.1050-1056, 2010. ,
Nitrate-Selective Electrode Developed by Electrochemically Mediated Imprinting/Doping of Polypyrrole, Analytical Chemistry, vol.67, issue.10, pp.1654-1660, 1995. ,
DOI : 10.1021/ac00106a002
Molecularly Imprinted Polymer-Based Sensors for Amperometric Determination of Nonelectroactive Substances, Electroanalysis, vol.31, issue.3-5, pp.604-611, 2009. ,
DOI : 10.1002/elan.200804456
Molecularly imprinted nanocomposites for highly sensitive SPR detection of a non-aqueous atrazine sample, The Analyst, vol.71, issue.1, pp.80-86, 2009. ,
DOI : 10.1039/B803350A
Label-Free Colorimetric Detection of Trace Atrazine in Aqueous Solution by Using Molecularly Imprinted Photonic Polymers, Chemistry - A European Journal, vol.5, issue.36 ,
DOI : 10.1002/chem.200801250
Molecularly imprinted polymer (biomimetic) based potentiometric sensor for atrazine, Sensors and Actuators B: Chemical, vol.123, issue.1, pp.65-70, 2006. ,
DOI : 10.1016/j.snb.2006.07.022
Atrazine Sensor Based on Molecularly Imprinted Polymer-Modified Gold Electrode, Analytical Chemistry, vol.75, issue.18, pp.4882-4886, 2003. ,
DOI : 10.1021/ac020795n
Thickness-shear mode acoustic sensor for atrazine using molecularly imprinted polymer as recognition element, Analytica Chimica Acta, vol.428, issue.1, pp.143-148, 2001. ,
DOI : 10.1016/S0003-2670(00)01216-2
Selective recognition of atrazine by molecularly imprinted polymer membranes ,
X-Ray Photoelectron Spectroscopy characterization of electrosynthesized poly(3-thiophene acetic acid) and its application in Molecularly Imprinted Polymers for atrazine, Thin Solid Films, vol.518, issue.14, pp.3705-3709, 2010. ,
DOI : 10.1016/j.tsf.2009.10.016
Molecularly imprinted conducting polymers based on electrochemical sensor for detection of atrazine, Anal. Chim. Acta, vol.649, issue.87, pp.236-245, 2009. ,
Determination of triazine herbicides using membrane-protected carbon nanotubes solid phase membrane tip extraction prior to micro-liquid chromatography, Journal of Chromatography A, vol.1217, issue.11, pp.1767-1772, 2010. ,
DOI : 10.1016/j.chroma.2010.01.053
Evaluation of a new method for chemical coating of aluminum wire with molecularly imprinted polymer layer. Application for the fabrication of triazines selective solid-phase microextraction fiber, Analytica Chimica Acta, vol.674, issue.1, pp.40-48, 2010. ,
DOI : 10.1016/j.aca.2010.06.006
Online Hyphenation of Multimodal Microsolid Phase Extraction Involving Renewable Molecularly Imprinted and Reversed-Phase Sorbents to Liquid Chromatography for Automatic Multiresidue Assays, Analytical Chemistry, vol.82, issue.7, pp.3052-3060, 2010. ,
DOI : 10.1021/ac100185s
Microwave Heating in Preparation of Magnetic Molecularly Imprinted Polymer Beads for Trace Triazines Analysis in Complicated Samples, Analytical Chemistry, vol.81, issue.3, pp.967-976, 2009. ,
DOI : 10.1021/ac8018262
Selective extraction of triazine herbicides from food samples based on a combination of a liquid membrane and molecularly imprinted polymers, Journal of Chromatography A, vol.1216, issue.40, pp.6796-6801, 2009. ,
DOI : 10.1016/j.chroma.2009.08.003
URL : https://hal.archives-ouvertes.fr/hal-00426279
Removal of endocrine-disrupting compounds from water using macroporous molecularly imprinted cryogels in a moving-bed reactor, Journal of Separation Science, vol.28, issue.9, pp.1471-1479, 2009. ,
DOI : 10.1002/jssc.200800670
Improvement of extraction capability of magnetic molecularly imprinted polymer beads in aqueous media via dual-phase solvent system, Talanta, vol.79, issue.3, pp.576-582, 2009. ,
DOI : 10.1016/j.talanta.2009.04.029
Preparation and binding study of solid-phase microextraction fiber on the basis of ametryn imprinted polymer. Application to the selective extraction of persistent triazine herbicides in tap water, rice, maize and onion, J. Chromatogr ,
Data on the structure and recognition properties of the template-selective binding sites in semi-IPN-based molecularly imprinted polymer membranes, Materials Science and Engineering: C, vol.28, issue.8, pp.1472-1479, 2008. ,
DOI : 10.1016/j.msec.2008.04.006
Molecular imprinted solid Phase extraction for determination of atrazine in environmental samples. Iran, J. Environ. Health. Sci. Eng, vol.5, issue.4, pp.283-296, 2008. ,
Preparation of new solid phase micro extraction fiber on the basis of atrazine-molecular imprinted polymer: Application for GC and GC/MS screening of triazine herbicides in water, rice and onion, Analytica Chimica Acta, vol.616, issue.2, pp.152-159, 2008. ,
DOI : 10.1016/j.aca.2008.04.037
Molecularly imprinted polymer applied to the determination of the residual mass of atrazine and metabolites within an agricultural catchment (Br??villes, France), Journal of Chromatography A, vol.1206, issue.2, pp.1206-95, 2008. ,
DOI : 10.1016/j.chroma.2008.08.034
Design and Preparation of Molecularly Imprinted Atrazine-Receptor Polymers: Investigation of Functional Monomers and Solvents., Analytical Sciences, vol.14, issue.4, pp.699-702, 1998. ,
DOI : 10.2116/analsci.14.699
Selective Recognition of the Herbicide Atrazine by Noncovalent Molecularly Imprinted Polymers, Journal of Agricultural and Food Chemistry, vol.44, issue.1, pp.141-145, 1996. ,
DOI : 10.1021/jf950233n
Influence of template basicity and hydrophobicity on the molecular recognition properties of molecularly imprinted polymers, Journal of Chromatography A, vol.753, issue.2, pp.191-200, 1996. ,
DOI : 10.1016/S0021-9673(96)00564-X
A molecularly imprinted synthetic polymer receptor selective for atrazine, Analytical Chemistry, vol.67, issue.23, pp.4404-4408, 1995. ,
DOI : 10.1021/ac00119a032
Atrazine sensing by molecularly imprinted membranes, Biosensors and Bioelectronics, vol.10, issue.9-10, pp.959-964, 1995. ,
DOI : 10.1016/0956-5663(95)99233-B
Overoxidized Polypyrrole with Dopant Complementary Cavities as a New Molecularly Imprinted Polymer Matrix., Analytical Sciences, vol.15, issue.9, pp.827-828, 1999. ,
DOI : 10.2116/analsci.15.827
-Lactate and Their Application to Enantioseparation of Amino Acids, Analytical Chemistry, vol.74, issue.16, pp.4184-4190, 2002. ,
DOI : 10.1021/ac025822o
URL : https://hal.archives-ouvertes.fr/hal-00259589
Molecularly imprinted Polypyrrole prepared by electrodeposition for the selective recognition of Tryptophan enentiomers, J. App. Polym. Sci, vol.115, 1952. ,
Dynamic modulation of detection window in conducting polymer based biosensors, Biosensors and Bioelectronics, vol.25, issue.10, pp.2384-2388, 2010. ,
DOI : 10.1016/j.bios.2010.03.023
Conception et développement d'un capteur électrochimique à base de polymères conducteurs à mémoire de forme pour la détection de petites molécules : application au cas de l'atrazine, Sciences et Techniques Analytiques, Conservatoire National des Arts et Métiers CNAM, 2010. ,
Détecteur électrochimique d'une petite molécule cible à base polymères conjugués à effet mémoire et procédé de détection utilisant un tel détecteur, pp.9-4963, 2009. ,
Electropolymerisation of 3,4-ethylenedioxythiophene in aqueous solutions, Electrochemistry Communications, vol.6, issue.11, pp.1192-1198, 2004. ,
DOI : 10.1016/j.elecom.2004.09.021
Improvement of the Electrosynthesis and Physicochemical Properties of Poly(3,4- ethylenedioxythiophene) Using a Sodium Dodecyl Sulfate Micellar Aqueous Medium Langmuir, pp.2566-2574, 1999. ,
Effects of polymerization potential on the properties of electrosynthesized PEDOT films, Electrochimica Acta, vol.48, issue.12, pp.1713-1717, 2003. ,
DOI : 10.1016/S0013-4686(03)00143-9
Nucleation and growth of poly(3,4-ethylenedioxythiophene) thin films on highly oriented pyrolytic graphite (HOPG) electrodes, Electrochemistry Communications, vol.10, issue.11, pp.1752-1755, 2008. ,
DOI : 10.1016/j.elecom.2008.09.003
The growth of polypyrrole films on electrodes, Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, vol.300, issue.1-2, pp.85-98, 1991. ,
DOI : 10.1016/0022-0728(91)85385-3
Stability/degradation of polymer solar cells, Solar Energy Materials and Solar Cells, vol.92, issue.7, pp.686-714, 2008. ,
DOI : 10.1016/j.solmat.2008.01.005
Layer-by-Layer Self-Assembled Chitosan/Poly(thiophene-3-acetic acid) and Organophosphorus Hydrolase Multilayers, Journal of the American Chemical Society, vol.125, issue.7, pp.1805-1809, 2003. ,
DOI : 10.1021/ja028691h
Use of polythiophene and poly(thiophene-3-acetic acid) as charge-selective films for amperometric flow-cell detectors, Journal of Materials Chemistry, vol.5, issue.4, pp.631-637, 1995. ,
DOI : 10.1039/jm9950500631
Covalent immobilization of glucose oxidase on films prepared by electrochemical copolymerization of 3-methylthiophene and thiophene-3-acetic acid for amperometric sensing of glucose: Effects of polymerization conditions on sensing properties, European Polymer Journal, vol.43, issue.8, pp.3264-3276, 2007. ,
DOI : 10.1016/j.eurpolymj.2007.06.005
X-Ray Photoelectron Spectroscopy characterization of electrosynthesized poly(3-thiophene acetic acid) and its application in Molecularly Imprinted Polymers for atrazine, Thin Solid Films, vol.518, issue.14, pp.3705-3709, 2010. ,
DOI : 10.1016/j.tsf.2009.10.016
Molecularly imprinted conducting polymers based on electrochemical sensor for detection of atrazine, Anal. Chim. Acta, vol.649, pp.236-245, 2009. ,
Synthesis and properties of poly(3-thiopheneacetic acid) and its networks via electropolymerization, Synthetic Metals, vol.99, issue.1, pp.53-59, 1999. ,
DOI : 10.1016/S0379-6779(98)00201-X
ATRAZINE, Données technico-économique sur les substances chimiques en France, Rapport INERIS, p.4, 2007. ,
On the Origin of the So-Called Nucleation Loop during Electropolymerization of Conducting Polymers, The Journal of Physical Chemistry B, vol.111, issue.5, pp.989-997, 2007. ,
DOI : 10.1021/jp066413p
Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenes, Journal of Electroanalytical Chemistry, vol.369, issue.1-2, pp.87-92, 1994. ,
DOI : 10.1016/0022-0728(94)87085-3
Erratum to ???Nucleation and growth of poly(3,4-ethylenedioxythiophene) in acetonitrile on platinum under potentiostatic conditions???, Journal of Electroanalytical Chemistry, vol.476, issue.2, pp.103-111, 1999. ,
DOI : 10.1016/S0022-0728(99)00376-9
Kinetics and mechanism of the electrochemical p-doping of PEDOT, Electrochemistry Communications, vol.9, issue.6, pp.1316-1322, 2007. ,
DOI : 10.1016/j.elecom.2007.01.009
Atrazine Sensor Based on Molecularly Imprinted Polymer-Modified Gold Electrode, Analytical Chemistry, vol.75, issue.18, pp.4882-4886, 2003. ,
DOI : 10.1021/ac020795n
Electrochemistry of s-triazine herbicides: Reduction of atrazine and terbutylazine in aqueous solutions, Journal of Electroanalytical Chemistry, vol.395, issue.1-2, pp.189-193, 1995. ,
DOI : 10.1016/0022-0728(95)04096-7
A novel mechanism of electrochemical deposition of conducting polymers: two-dimensional layer-by-layer nucleation and growth observed for poly(thiophene-3-acetid acid), Electrochimica Acta, vol.37, issue.3, pp.393-401, 1992. ,
DOI : 10.1016/0013-4686(92)87027-W
Different steps in electrodeposition of poly(3-methylthiophene) films on platinum electrodes studied by ellipsometry, SEM and AFM techniques, Synthetic Metals, vol.53, issue.2, pp.127-147, 1993. ,
DOI : 10.1016/0379-6779(93)90885-Z
Nucleation and growth mechanisms of poly(thiophene) Part 1. Effect of electrolyte and monomer concentration in dichloromethane, Journal of Electroanalytical Chemistry, vol.430, issue.1-2, pp.77-90, 1997. ,
DOI : 10.1016/S0022-0728(97)00109-5
Growth mechanisms, morphology, and electroactivity of PEDOT layers produced by electrochemical routes in aqueous medium, Synthetic Metals, vol.159, issue.5-6, pp.406-414, 2009. ,
DOI : 10.1016/j.synthmet.2008.10.014
Electrodeposition Mechanisms and Electrochemical Behavior of Poly(3,4-ethylenedithiathiophene), The Journal of Physical Chemistry C, vol.111, issue.12, pp.4553-4560, 2007. ,
DOI : 10.1021/jp068525m
Cyclic and differential pulse voltammetric behavior of reactants confined to the electrode surface, Analytical Chemistry, vol.49, issue.11, pp.1589-1595, 1977. ,
DOI : 10.1021/ac50019a033
An interpretation of the vibrational spectra of insulating and electrically conducting poly(3???methylthiophene) aided by a theoretical dynamical model, The Journal of Chemical Physics, vol.100, issue.1, pp.114-129, 1994. ,
DOI : 10.1063/1.466982
Fully undoped and soluble oligo(3,4-ethylenedioxythiophene)s: spectroscopic study and electrochemical characterization, Journal of Materials Chemistry, vol.11, issue.5, pp.1378-1382, 2001. ,
DOI : 10.1039/b100033k
A sensitive and selective sensor for dopamine determination based on a molecularly imprinted electropolymer of o-aminophenol, Sensors and Actuators B: Chemical, vol.140, issue.2, pp.663-669, 2009. ,
DOI : 10.1016/j.snb.2009.04.067
Systematic Control of the Electrical Conductivity of Poly(3,4-ethylenedioxythiophene) via Oxidative Chemical Vapor Deposition, Macromolecules, vol.40, issue.18, pp.6552-6556, 2007. ,
DOI : 10.1021/ma0628477
In situ investigations of the 3-methylthiophene polymer with attenuated total reflection Fourier transform infrared spectroscopy, The Journal of Physical Chemistry, vol.88, issue.4, 1984. ,
DOI : 10.1021/j150648a004
Electropolymerization of bithiophene on Pt and Fe electrodes in an aqueous sodium dodecylsulfate (SDS) micellar medium, Synthetic Metals, vol.83, issue.2, pp.159-165, 1996. ,
DOI : 10.1016/S0379-6779(97)80070-7
Reaction analysis of 3,4-ethylenedioxythiophene with potassium persulfate in aqueous solution by using a calorimeter, Polymer, vol.41, issue.12, pp.4491-4499, 2000. ,
DOI : 10.1016/S0032-3861(99)00670-9
Hydrogen-Bonding Stabilized Self-Assembled Monolayer Film of a Functionalized Diacid, Protoporphyrin IX Zinc(II), onto a Gold Surface, Nano Letters, vol.1, issue.5, pp.241-243, 2001. ,
DOI : 10.1021/nl000192w
Enzyme Recognition by Polypyrrole Functionalized with Bioactive Peptides, Journal of the American Chemical Society, vol.116, issue.19, pp.8813-8814, 1994. ,
DOI : 10.1021/ja00098a053
Conjugated polymer-based DNA chip with real time access and femtomol detection threshold, Sensors and Actuators B: Chemical, vol.123, issue.1, pp.13-20, 2007. ,
DOI : 10.1016/j.snb.2006.07.015
H NMR study of the hetero-association of pyridine with sterically hindered EDOT diols, Journal of Physical Organic Chemistry, vol.8, issue.4, pp.289-297, 2009. ,
DOI : 10.1002/poc.1467
A molecularly imprinted synthetic polymer receptor selective for atrazine, Analytical Chemistry, vol.67, issue.23, pp.4404-4408, 1995. ,
DOI : 10.1021/ac00119a032
Principles of Chemical Sensors, 2009. ,
DOI : 10.1007/978-1-4757-6257-0
Thermodynamic Considerations for the Design of and Ligand Recognition by Molecularly Imprinted Polymers, Chemistry Letters, vol.24, issue.11, pp.1035-1036, 1995. ,
DOI : 10.1246/cl.1995.1035
Towards the rational design of molecularly imprinted polymers, Journal of Molecular Recognition, vol.34, issue.1-6, pp.79-82, 1998. ,
DOI : 10.1002/(SICI)1099-1352(199812)11:1/6<79::AID-JMR394>3.0.CO;2-B
How to create polymers with protein-like capabilities: A theoretical suggestion, Physica D: Nonlinear Phenomena, vol.107, issue.2-4, pp.316-321, 1997. ,
DOI : 10.1016/S0167-2789(97)00099-7
)-Nilvadipine. Comparison of Chiral Recognition Ability with HPLC Chiral Stationary Phases Based on a Protein, Analytical Chemistry, vol.75, issue.2, pp.191-198, 2003. ,
DOI : 10.1021/ac026039z
Study on the Binding Characteristic of S-Naproxen Imprinted Polymer and the Interactions between Templates and Monomers, Journal of Analytical Chemistry, vol.59, issue.10, pp.939-944, 2004. ,
DOI : 10.1023/B:JANC.0000043909.32186.a0
Synthesis and Evaluation of a Molecularly Imprinted Polymer Selective to 2,4,6-Trichlorophenol, Australian Journal of Chemistry, vol.57, issue.8, pp.759-764, 2004. ,
DOI : 10.1071/CH04004
Formulation of Cocaine-Imprinted Polymers Utilizing Molecular Modelling and NMR Analysis, Australian Journal of Chemistry, vol.58, issue.5, pp.315-320, 2005. ,
DOI : 10.1071/CH04138
Imprinted polymers for chiral resolution of (??)-ephedrine: understanding the pre-polymerisation equilibrium and the action of different mobile phase modifiers, The Analyst, vol.190, issue.2, pp.179-187, 2005. ,
DOI : 10.1039/B408751H
Investigations into the Mechanisms of Molecular Recognition with Imprinted Polymers, Macromolecules, vol.32, issue.12, pp.4113-4121, 1999. ,
DOI : 10.1021/ma981445z
Nuclear magnetic resonance study of the molecular imprinting of (???)-nicotine: template self-association, a molecular basis for cooperative ligand binding, Journal of Chromatography A, vol.1024, issue.1-2, pp.39-44, 2004. ,
DOI : 10.1016/j.chroma.2003.09.064
Synthetic strategies for the generation of molecularly imprinted organic polymers, Advanced Drug Delivery Reviews, vol.57, issue.12, pp.1742-1778, 2005. ,
DOI : 10.1016/j.addr.2005.07.011
Docking and scoring in virtual screening for drug discovery: methods and applications, Nature Reviews Drug Discovery, vol.8, issue.11, pp.935-949, 2004. ,
DOI : 10.1021/jm010016f
Enzyme Recognition by Polypyrrole Functionalized with Bioactive Peptides, Journal of the American Chemical Society, vol.116, issue.19, pp.8813-8814, 1994. ,
DOI : 10.1021/ja00098a053
Steady-state and time-resolved studies of 2,7-carbazole-based conjugated polymers in solution and as thin films: determination of their solid state fluorescence quantum efficiencies, Chemical Physics Letters, vol.370, issue.5-6, pp.799-804, 2003. ,
DOI : 10.1016/S0009-2614(03)00178-7
Functional polythiophenes as optical chemo- and biosensors, Tetrahedron, vol.60, issue.49, pp.11169-11173, 2004. ,
DOI : 10.1016/j.tet.2004.08.053
Optical Sensors Based on Hybrid Aptamer/Conjugated Polymer Complexes, Journal of the American Chemical Society, vol.126, issue.5, pp.1384-1387, 2004. ,
DOI : 10.1021/ja037289f
Quantum Mechanical Continuum Solvation Models, Chemical Reviews, vol.105, issue.8, p.2999, 2005. ,
DOI : 10.1021/cr9904009
Universal Solvation Model Based on Solute Electron Density and on a Continuum Model of the Solvent Defined by the Bulk Dielectric Constant and Atomic Surface Tensions, The Journal of Physical Chemistry B, vol.113, issue.18, pp.6378-6396, 2009. ,
DOI : 10.1021/jp810292n
Semiempirical GGA-type density functional constructed with a long-range dispersion correction, Journal of Computational Chemistry, vol.10, issue.15, pp.1787-1799, 2006. ,
DOI : 10.1002/jcc.20495
A proper account of core-polarization with pseudopotentials: single valence-electron alkali compounds, Chemical Physics Letters, vol.89, issue.5, pp.418-456, 1989. ,
DOI : 10.1016/0009-2614(82)80012-2
Calculation of intermolecular interactions in the benzene dimer using coupled-cluster and local electron correlation methods, Physical Chemistry Chemical Physics, vol.392, issue.35, pp.4072-4078, 2006. ,
DOI : 10.1039/b608623c
O vapors by measurement of thermal conductivity, The Journal of Chemical Physics, vol.71, issue.6, pp.2703-2711, 1979. ,
DOI : 10.1063/1.438628
Estimating the Entropic Cost of Self-Assembly of Multiparticle Hydrogen-Bonded Aggregates Based on the Cyanuric Acid??Melamine Lattice, The Journal of Organic Chemistry, vol.63, issue.12, pp.3821-3830, 1998. ,
DOI : 10.1021/jo970944f
Study of electrolytic solution process using the scaled-particle theory. 2. The standard entropy of solvation, Journal of the American Chemical Society, vol.102, issue.7, p.2181, 1980. ,
DOI : 10.1021/ja00527a006
Revisiting Free Energy Calculations: A Theoretical Connection to MM/PBSA and Direct Calculation of the Association Free Energy, Biophysical Journal, vol.86, issue.1, pp.67-74, 2004. ,
DOI : 10.1016/S0006-3495(04)74084-9
Relationship between the gas-phase entropies of molecules and their entropies of solvation in water and 1-octanol, Journal of the American Chemical Society, vol.102, issue.16, pp.5316-5322, 1980. ,
DOI : 10.1021/ja00536a033
Thermodynamics and Kinetics of Imidazole Formation from Glyoxal, Methylamine, and Formaldehyde: A Computational Study, The Journal of Physical Chemistry A, vol.115, issue.9, p.1667, 2011. ,
DOI : 10.1021/jp111527x
Acetonitrile: far-infrared spectra and chemical thermodynamic properties. Discussion of an entropy discrepancy, The Journal of Physical Chemistry, vol.71, issue.4, pp.914-916, 1967. ,
DOI : 10.1021/j100863a022
Electropolymerization of ethylene dioxythiophene (EDOT) in micellar aqueous solutions studied by electrochemical quartz crystal microbalance and surface plasmon resonance, Electrochimica Acta, vol.50, issue.14, pp.2849-2856, 2005. ,
DOI : 10.1016/j.electacta.2004.11.032
Overoxidized Polypyrrole with Dopant Complementary Cavities as a New Molecularly Imprinted Polymer Matrix., Analytical Sciences, vol.15, issue.9, 1999. ,
DOI : 10.2116/analsci.15.827
Molecularly imprinted polymers: a new approach to the preparation of functional materials, proceedings of the Estonian Academy of Sciences, vol.58, issue.3 4, 2009. ,
General appraoch to the interpretation of electrochemical quartz crystal microbalance data. 1. Cyclic voltammetry: kinetic subtleties in the electrochemical doping of polybithiophene films, The Journal of Physical Chemistry, vol.95, issue.8, p.3271, 1991. ,
DOI : 10.1021/j100161a056
A combined electrochemical quartz crystal microbalance (EQCM) and probe beam deflection (PBD) study of a poly(o-toluidine) modified electrode in perchloric acid solution, Journal of Electroanalytical Chemistry, vol.454, issue.1-2, 1998. ,
DOI : 10.1016/S0022-0728(98)00245-9
Electrochemical and electrogravimetric behaviors of conducting polymer. Theoretical aspects and application to co-polymer films based on juglone, Electrochimica Acta, vol.55, issue.21, p.6136, 2010. ,
DOI : 10.1016/j.electacta.2010.02.013
Effect of the solvent and the anion on the doping/dedoping behavior of PEDOT films studied with the electrochemical quartz microbalance, J. Phys ,
Ion, solvent and polymer dynamics in polyaniline conducting polymer films, Electrochim. Acta, vol.108, issue.51 9, pp.6018-6024, 2004. ,
Rate limiting steps of charge transfer at conducting polymers, Elektrokhimiya, vol.40, issue.303, 2004. ,
Sensitivity Estimation and Biosensing Potential of Lithium Tantalate Shear Horizontal Surface Acoustic Wave Sensor, Sensor Letters, vol.7, issue.5, pp.1000-1005, 2009. ,
DOI : 10.1166/sl.2009.1188
Molecularly imprinted conducting polymers based on electrochemical sensor for detection of atrazine Design and properties of quartz-based love wave acoustic sensors incorporating silicon dioxide and PMMA guiding layers Fast electrochemical studies of the polymerization mechanisms of pyrroles and thiophenes. Identification of the first steps. Existence of Pidimers in solution, Anal. Chim. Acta. Smart Mater. Struct. Synth. Met, vol.649, issue.75, pp.236-245, 1995. ,
Identification of the first steps of the electrochemical polymerization of pyrroles by means of fast potential step techniques Nucleation and growth of PEDOT thin films on highly oriented pyrolytic graphite (HOPG) electrodes Different steps in electrodeposition of poly(3- methylthiophene) films on platinum electrodes studied by ellipsometry, SEM and AFM techniques, 17 H. Randriamahazaka, V. Noël, C. Chevrot, J. Nucleation and growth of PEDOT in acetonitrile on platinum under potentiostatic conditions, 1752. ,
Different steps in the electrosynthesis of PEDOT on platinum Growth mechanisms, morphology, and electroactivity of PEDOT layers produced by electrochemical routes in aqueous medium Electropolymerized molecularly imprinted polymers as receptor layers in capacitive chemical sensors Kinetics and mechanism of the electrochemical p-doping of PEDOT, J. Phys. Chem. B Electrochim. Acta. Synth. Met. Anal. Chem. Electrochem. Commun, vol.115, issue.9, p.1316, 1999. ,