P. Curie and J. Curie, Développement par pression, de l'électricité polaire dans les cristaux hémièdres à faces inclinées, Comptes rendus de L'académie des sciences, 1880.

P. Curie and C. J. , Contractions et dilatations produites par des tensions électriques dans les cristaux, Comptes rendus de l'académie des sciences, p.1881

M. Ourak, J. M. Rouvaen, B. Nongaillard, G. Waxin, and E. Bridoux, Production d'ondes acoustiques de surface focalis??es et utilisation en contr??le non destructif, Revue de Physique Appliqu??e, vol.21, issue.7, pp.417-424, 1986.
DOI : 10.1051/rphysap:01986002107041700

URL : https://hal.archives-ouvertes.fr/jpa-00245459/document

D. P. Morgan, A history of surface acoustic wave devices International journal of high speed electronics and systems, pp.553-602, 2000.

R. M. White and F. W. Voltmer, DIRECT PIEZOELECTRIC COUPLING TO SURFACE ELASTIC WAVES, Applied Physics Letters, vol.7, issue.12, pp.314-316, 1965.
DOI : 10.1063/1.1754276

L. Rayleigh, On waves propagating along the plane surface of an elastic solid, Proc. of the london Mathematical society, pp.4-11, 1885.

E. Dieulesaint and D. Royer, Ondes élastiques dans les solides, 1999.

R. H. Tancrell, M. B. Schulz, H. H. Barett, L. Davis, and M. G. Holland, Dispersive delay lines using ultrasonic surface waves, Proc. of the IEEE, pp.1211-1213, 1969.
DOI : 10.1109/PROC.1969.7202

E. A. Ash, Surface Wave Grating Reflectors and Resonators, G-MTT 1970 International Microwave Symposium, pp.385-386, 1970.
DOI : 10.1109/GMTT.1970.1122853

S. Ballandras and W. Steichen, Composants acoustiques utilisés pour le filtrage -Modèles et outils de simulation, Techniques de l'ingénieur, 2010.

R. H. Tancrell and M. G. Holland, Acoustic surface wave filters, Proc. of the IEEE, pp.393-409, 1971.
DOI : 10.1109/proc.1971.8180

M. Lewis, Saw filters employing interdigitated interdigital transducers IDT, Proc. of the IEEE ultrasonics symposium, pp.12-17, 1982.
DOI : 10.1109/ultsym.1982.197779

C. C. Ruppel, A. A. Sachs, and F. J. Seifert, A review of optimization algorithms for the design of the SAW transducers, IEEE 1991 Ultrasonics Symposium, pp.73-88, 1991.
DOI : 10.1109/ULTSYM.1991.234131

C. C. Ruppel, W. Ruile, G. Scholl, K. C. Wagner, and O. Manner, Review of models for low-loss filter design and applications, Proceedings of IEEE Ultrasonics Symposium ULTSYM-94, pp.313-324, 1994.
DOI : 10.1109/ULTSYM.1994.401602

H. F. Tiersten and R. C. Smythe, Guided acoustic???surface???wave filters, Proc. of the IEEE ultrasonics symposium, pp.293-294, 1975.
DOI : 10.1063/1.88673

G. Martin and B. Wall, A saw resonator filter using longitudinal and transverse modes, Proc. of the IEEE ultrasonics symposium, pp.53-55, 1996.

W. Soluch, Design and properties of STW asynchronous resonators on quartz, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.54, issue.2, pp.413-417, 2007.
DOI : 10.1109/TUFFC.2007.255

J. F. Dias and H. E. Karrer, Stress effects in acoustic surface wave circuits and applications to pressure and force transducers IEEE solid-state circuits conference, digest of technical papers, IEEE International, pp.166-167, 1974.

R. Boudot, Oscillateurs micro-ondes à haute pureté spectrale, Thèse de doctorat de l'université de Franche-Comté, 2006.

E. Rubiola, Phase noise and frequency stability in oscillators, 2010.
DOI : 10.1017/CBO9780511812798

URL : https://hal.archives-ouvertes.fr/hal-00344308

T. E. Parker and G. K. Montress, Precision surface-acoustic-wave (SAW) oscillators, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.35, issue.3, pp.342-364, 1988.
DOI : 10.1109/58.20455

I. D. Avramov, O. Ikata, T. Matsuda, and Y. Satoh, High-performance surface transverse wave based voltage controlled feedback oscillators in the 2.0 to 2.5 GHz range, Proceedings of the 1998 IEEE International Frequency Control Symposium (Cat. No.98CH36165), pp.519-527, 1998.
DOI : 10.1109/FREQ.1998.717948

C. E. Hay and M. E. Harrell, 2.4 GHz and 2.5 GHz miniature, low-noise oscillators using surface transverse sustaining amplifier, Proc. of IEEE international frequency control symposium, pp.174-179, 2004.
URL : https://hal.archives-ouvertes.fr/in2p3-00329802

S. Fujii, Y. Takada, and H. Harima, Low phase noise VCSO with diamond SAW resonators, Proceedings of the 2005 IEEE International Frequency Control Symposium and Exposition, 2005., pp.499-502, 2005.
DOI : 10.1109/FREQ.2005.1573981

J. A. Kosinski, R. Pastore, and I. D. Avramov, Theoretical and experimental evidence for superior intrinsic Q of STW devices on rotated Y-cut quartz, Proceedings of the 1999 Joint Meeting of the European Frequency and Time Forum and the IEEE International Frequency Control Symposium (Cat. No.99CH36313), pp.867-870, 1999.
DOI : 10.1109/FREQ.1999.841442

B. A. Auld, J. J. Gagnepain, and M. G. Holland, Temperature dependance of surface acoustics wave velocity on alpha-quartz, Electronic letter, pp.650-651, 1976.

G. Montress, T. E. Parker, and A. D. , Review of SAW oscillator performance, Proceedings of IEEE Ultrasonics Symposium ULTSYM-94, pp.43-54, 1994.
DOI : 10.1109/ULTSYM.1994.401550

I. Avramov, V. Aliev, S. Denissenko, and A. S. Koslov, 2 GHz surface transverse wave resonators -Design, Performance, Limitations, Proc. of the international frequency control symposium, pp.459-468, 1995.
DOI : 10.1109/freq.1995.483935

M. Pereira-da-cunha, E. L. Adler, and D. C. Malocha, HVPSAW sensitivity to film properties for ZnO/diamond/Si structures, 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.00CH37121), pp.283-286, 2000.
DOI : 10.1109/ULTSYM.2000.922557

H. Nakahata, Diamond SAW filter for 2,488 Gbps retiming, Proc. of the IEEE ultrasonics symposium, pp.319-322, 1998.

S. Fujii, T. Kawano, and . Umeda, Diamond SAW resonators with SiO2, Proc. of the IEEE ultrasonics symposium, pp.2367-2370, 2007.

A. Hachigo, H. Nakahata, K. Itakura, S. Fujii, and S. Shikata, 10 GHz narrow band SAW filters using diamond, 1999 IEEE Ultrasonics Symposium. Proceedings. International Symposium (Cat. No.99CH37027), pp.325-328, 1999.
DOI : 10.1109/ULTSYM.1999.849412

F. Benedic, Surface acoustic wave devices based on nanocrystalline diamond and aluminium nitride, Diamond and Related Materials, vol.13, issue.2, pp.347-353, 2004.
DOI : 10.1016/j.diamond.2003.10.020

T. Uemura, Low loss diamond SAW devices by small grain size poly-cristalline diamond, Proc. of the IEEE ultrasonics symposium, pp.431-434, 2002.

O. Elmazria, Nanocrystalline diamond films for surface acoustic wave devices, Diamond and Related Materials, vol.15, issue.2-3, pp.193-198, 2006.
DOI : 10.1016/j.diamond.2005.07.031

E. Dogheche, D. Remiens, S. Shikata, A. Hachigo, and H. Nakahata, High-frequency surface acoustic wave devices based on LiNbO3???diamond multilayered structure, Applied Physics Letters, vol.87, issue.21, 2005.
DOI : 10.1063/1.2135383

T. Omori, K. Y. Hashimoto, and M. Yamaguchi, PZT thin films for SAW and BAW devices, International symposium on acoustic wave devices for future mobile communication systems, 2001.

S. Y. Chu, T. Y. Chen, I. Tsai, and W. Water, Doping effects of Nb additives on the piezoelectric and dielectric properties of PZT ceramics and its application on SAW device, Sensors and Actuators A: Physical, vol.113, issue.2, pp.198-203, 2004.
DOI : 10.1016/j.sna.2004.02.020

Y. J. Hsiao, T. H. Fang, Y. H. Chang, Y. S. Chang, and S. Wu, Surface acoustic wave characteristics and electromechanical coupling coefficient of lead zirconate titanate thin films, Materials Letters, vol.60, issue.9-10, pp.1140-1143, 2006.
DOI : 10.1016/j.matlet.2005.10.109

H. Odagawa, T. Tsuji, and K. Yamanouchi, 10 GHz range low loss wide band unidirectional SAW filters using sub-0,1 µm width narrow-gap elecrodes, Proc. of the IEEE ultrasonics symposium, pp.1587-1590, 1996.

K. Yamanouchi, Generation, propagation, and attenuation of 10 GHz-Range SAW in LiNbO3, Proc. of the IEEE ultrasonics symposium, pp.57-62, 1998.

M. Loschonsky, Electron-beam processed SAW devices for sensor applications, 2009 6th International Multi-Conference on Systems, Signals and Devices, pp.1-4, 2009.
DOI : 10.1109/SSD.2009.4956715

URL : https://hal.archives-ouvertes.fr/hal-00486435

S. Lehtonen, SAW impedance element filters towards 5GHz, Proc. of the IEEE ultrasonics symposium, pp.369-372, 1998.

G. F. Iriarte, E-beam lithography of nano-interdigital transducers on insulating and semiconducting substrates, Microsystem technologies, pp.2023-2027, 2010.
DOI : 10.1007/s00542-010-1149-y

L. Fu-der, J. , and H. , Increasing the maximum operating frequency of SAW filters fabricated using an I-line source, Microelectronic engineering, pp.1300-1302, 2009.

T. Hesjedal, W. Seidel, and H. Kostial, Near-field phase shift photolithography for highfrequency SAW transducers, Proc. of the IEEE ultrasonics symposium, pp.247-250, 2002.

S. Nagamachi and U. Masahiro, Focused ion beam direct deposition and its applications, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.16, issue.4, pp.2515-2521, 1998.
DOI : 10.1116/1.590201

N. H. Chen, J. C. Huang, C. Y. Wang, and F. S. Huang, Fabrication of a GHz band surface acoustic wave filter by UV-nanoimprint with an HSQ stamp, Journal of Micromechanics and Microengineering, vol.21, issue.4, p.45021, 2011.
DOI : 10.1088/0960-1317/21/4/045021

G. F. Cardinale, Fabrication of a surface acoustic wave-based correlator using stepand-flash imprint lithography, Journal of vacuum science and technoloy B, vol.6, pp.3265-3270, 2004.

P. Kirsch, Combination of e-Beam Lithography and of High Velocity AlN/Diamond-Layered Structure for SAW Filters in X Band, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.54, issue.7, pp.1486-1491, 2007.
DOI : 10.1109/TUFFC.2007.411

L. Pain, S. Tedesco, and C. Constancias, Direct write lithography: the global solution for R&D and manufacturing, Comptes Rendus Physique, vol.7, issue.8, pp.910-923, 2006.
DOI : 10.1016/j.crhy.2006.10.003

P. J. Breton, From microns to nanometers : early landmarks in the science of scanning electron microscope imaging, Scanning microscopy, vol.13, issue.1, pp.1-6, 1999.

T. E. Everhart and R. F. Thornley, Wide-band detector for micro-microampere low-energy electron currents, Journal of Scientific Instruments, vol.37, issue.7, pp.246-248, 1960.
DOI : 10.1088/0950-7671/37/7/307

G. E. Moore, Cramming More Components Onto Integrated Circuits, Proceedings of the IEEE, vol.86, issue.1, 1965.
DOI : 10.1109/JPROC.1998.658762

O. C. Wells, Electron beam in microelectronics, in Introduction to electron beam technology, 1962.

M. Hatzakis, Electron Resists for Microcircuit and Mask Production, Journal of The Electrochemical Society, vol.116, issue.7, pp.1033-1037, 1969.
DOI : 10.1149/1.2412145

M. Gesley, Thermal???field???emission electron optics for nanolithography, Journal of Applied Physics, vol.65, issue.3, pp.914-926, 1989.
DOI : 10.1063/1.342993

T. H. Chang, Proximity effect in electron???beam lithography, Journal of Vacuum Science and Technology, vol.12, issue.6, pp.1271-1275, 1975.
DOI : 10.1116/1.568515

W. H. Arnold, Handbook of microlithography, micromachining and microfabrication

S. Y. Lee and K. Anbumony, Analysis of three dimensional proximity effect in electronbeam lithography, Microelectronic enginnering, pp.336-344, 2006.

I. Raptis, N. Glezos, E. Valamontes, E. Zervas, and P. Argitis, Electron beam lithography simulation for high resolution and high-density patterns, Vacuum, vol.62, issue.2-3, pp.263-271, 2001.
DOI : 10.1016/S0042-207X(00)00448-6

Y. Yau, R. F. Pease, A. Iranmanesh, and K. Polasko, Generation and applications of finely focused beams of low???energy electrons, Journal of Vacuum Science and Technology, vol.19, issue.4, 1981.
DOI : 10.1116/1.571166

M. Parikh, Self???consistent proximity effect correction technique for resist exposure (SPECTRE), Journal of Vacuum Science and Technology, vol.15, issue.3, pp.931-933, 1978.
DOI : 10.1116/1.569678

H. Hubner, Strategy for the correction of the proximity effect in electron beam lithography, Microelectronic engineering, pp.275-293, 1992.
DOI : 10.1016/0167-9317(92)90129-F

J. Zhang, M. Fouad, M. Yavuz, and B. Cui, Charging effect reduction in electron beam lithography with nA beam current, Microelectronic engineering, 2011.
DOI : 10.1016/j.mee.2010.12.103

Y. Saida, T. Okubo, J. Sasaki, T. Konishi, and M. Morita, Evaluation of the new-type ESPACER adopted for its removal after post-exposure bake process, Photomask and Next-Generation Lithography Mask Technology XII, 2005.
DOI : 10.1117/12.617114

B. P. Van, A. Gaag, and . Sherer, Microfabrication below 10nm, Applied physics letter, vol.56, issue.5, pp.481-483, 1990.

R. E. Howard, E. L. Hu, and L. D. , Multilevel resist for lithography below 100 nm, IEEE Transactions on Electron Devices, vol.28, issue.11, pp.1378-1381, 1981.
DOI : 10.1109/T-ED.1981.20617

Y. Chen, K. Peng, and Z. Cui, A lift-off process for high resolution patterns using PMMA/LOR resist stack, Microelectronic engineering, pp.73-74, 2004.
DOI : 10.1016/S0167-9317(04)00111-X

M. Hatzakis, Recent developments in electron???resist evaluation techniques, Journal of Vacuum Science and Technology, vol.12, issue.6, pp.1276-1279, 1975.
DOI : 10.1116/1.568516

D. Drouin, CASINO V2.42???A Fast and Easy-to-use Modeling Tool for Scanning Electron Microscopy and Microanalysis Users, Scanning, vol.11, issue.3, pp.92-101, 2007.
DOI : 10.1002/sca.20000

J. H. Orloff and L. W. Swanson, Study of a field???ionization source for microprobe applications, Journal of Vacuum Science and Technology, vol.12, issue.6, pp.1209-1213, 1975.
DOI : 10.1116/1.568497

L. W. Swanson, G. A. Schwind, A. E. Bell, and J. E. Brady, Emission characteristics of gallium and bismuth liquid metal field ion sources, Journal of Vacuum Science and Technology, vol.16, issue.6, pp.1864-1868, 1979.
DOI : 10.1116/1.570314

L. W. Swanson, Liquid metal ion sources: Mechanism and applications, Nuclear Instruments and Methods in Physics Research, vol.218, issue.1-3, p.347, 1983.
DOI : 10.1016/0167-5087(83)91005-0

E. Pialat, Le micro-usinage de dispositifs polymères à bande interdite photonique par faisceau d'ions, Thèse de doctorat n°2004-23 de l'université de Limoges, 2004.

E. Munro, Image processing and computer-aided design in electron optics, Academic press, 1973.

J. Orloff, M. Utlaut, and L. Swanson, High???resolution focused ion beams, Review of Scientific Instruments, vol.64, issue.5, 2003.
DOI : 10.1063/1.1144104

P. Sigmund, A mechanism of surface micro-roughening by ion bombardment, Journal of Materials Science, vol.13, issue.11, pp.1545-1553, 1973.
DOI : 10.1007/BF00754888

A. Leslie, Characterization and applications of FIB/SIMS for microelectronic materials and devices," 5th european symposium on reliability of electron devices, failure physics and analysis, p.401, 1994.

C. Volkert and A. Minor, Focused Ion Beam Microscopy and Micromachining, MRS Bulletin, vol.43, issue.05, pp.389-399, 2007.
DOI : 10.1116/1.586024

B. I. Prenitzer, Transmission electron microscope specimen preparation of Zn powders using the focused ion beam lift-out technique, Mettalurgical and materials transactions A, p.2399, 1998.
DOI : 10.1007/s11661-998-0116-z

C. Lehrer, L. Frey, S. Petersen, and H. , Limitations of focused ion beam nanomachining, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.19, issue.6, pp.2533-2538, 2001.
DOI : 10.1116/1.1417553

L. Frey, C. Lehrer, and H. , Nanoscale effects in focused ion beam processing, Applied Physics A: Materials Science & Processing, vol.76, issue.7, pp.1017-1023, 2003.
DOI : 10.1007/s00339-002-1943-1

J. Orloff, L. W. Swanson, and M. Utlaut, Fundamental limits to imaging resolution for focused ion beams, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.14, issue.6, pp.3759-3763, 1996.
DOI : 10.1116/1.588663

E. Chason and M. J. Aziz, Spontaneous formation of patterns on sputtered surfaces, Scripta Materialia, vol.49, issue.10, pp.953-959, 2003.
DOI : 10.1016/S1359-6462(03)00474-3

J. F. Ziegler, J. Biersack, and M. D. Ziegler, SRIM : The Stopping and range of Ions in Matter, Ion implantation press, 2008.

J. F. Ziegler, June) site du logiciel SRIM, 2011.

S. T. Purcell, V. T. Binh, and P. Thevenard, Atomic-size metal ion sources: principles and use, Nanotechnology, vol.12, issue.2, pp.168-172, 2001.
DOI : 10.1088/0957-4484/12/2/320

J. Morgan, J. Notte, R. Hill, and B. Ward, An Introduction to the Helium Ion Microscope, Microscopy today, vol.14, issue.4, 2006.

D. Rio, 5 kV multielectron beam lithography: MAPPER tool and resist process characterization, Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, vol.28, issue.6, 2010.
DOI : 10.1116/1.3517664

S. Owa, Immersion Lithography Ready for 45 nm Manufacturing and Beyond, 2007 IEEE/SEMI Advanced Semiconductor Manufacturing Conference (ASMC), pp.238-244, 2007.
DOI : 10.1109/ASMC.2007.375108

D. J. Elliott and D. C. Ferranti, Sub-micron lithography at 248nm and 193nm axcimer laser wavelengths, Microelectronic engineering, pp.59-63, 1989.
DOI : 10.1016/0167-9317(89)90013-0

J. Du, Z. Cui, X. C. Yuan, and Y. Guo, Investigation of phase shift mask distorsion effect, Microelectronic engineering, pp.61-62, 2002.

B. J. Lin, The k3 coefficient in nonparaxial lambda/NA scaling equations for resolution, depth of focus, and immersion lithography, Journal of micro, vol.1, issue.1, pp.7-12, 2002.

B. Wu and A. Kumar, Extreme ultraviolet lithography: A review, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.25, issue.6, pp.1743-1761, 2007.
DOI : 10.1116/1.2794048

R. Ruiz, Density Multiplication and Improved Lithography by Directed Block Copolymer Assembly, Science, vol.321, issue.5891, pp.936-939, 2008.
DOI : 10.1126/science.1157626

R. A. Segalman, MATERIALS SCIENCE: Directing Self-Assembly Toward Perfection, Science, vol.321, issue.5891, pp.919-920, 2008.
DOI : 10.1126/science.1162907

H. Schmid and B. Michel, Siloxane Polymers for High-Resolution, High-Accuracy Soft Lithography, Macromolecules, vol.33, issue.8, pp.3042-3049, 2000.
DOI : 10.1021/ma982034l

S. Y. Chou, P. R. Krauss, and P. J. Renstrom, Nanoimprint lithography, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.14, issue.6, pp.4129-4133, 1996.
DOI : 10.1116/1.588605

Y. Hirai, Study of the resist deformation in nanoimprint lithography, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.19, issue.6, pp.2811-2815, 2001.
DOI : 10.1116/1.1415510

Y. Hirai, S. Yoshida, and N. Takagi, Defect analysis in thermal nanoimprint lithography, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.21, issue.6, pp.2765-2769, 2003.
DOI : 10.1116/1.1629289

S. Merino, H. Schift, A. Retolaza, and T. Haatainen, The use of automatic demolding in nano-imprint lithography processes, Microelectronic engineering, pp.5-8, 2007.

S. Landis, N. Chaix, C. Gourgon, and T. Leveder, Quantitative characterizations of a nanopatterned bonded wafer: force determination for nanoimprint lithography stamp removal, Nanotechnology, vol.19, issue.12, 2008.
DOI : 10.1088/0957-4484/19/12/125305

URL : https://hal.archives-ouvertes.fr/hal-00680967

R. W. Jaszewski, H. Schift, B. Schnyder, A. Schneuwly, and P. Groning, The deposition of anti-adhesive ultra-thin teflon-like films and their interaction with polymers during hot embossing, Applied Surface Science, vol.143, issue.1-4, pp.301-308, 1999.
DOI : 10.1016/S0169-4332(99)00014-8

M. Bender, M. Otto, B. Hadam, B. Spangenberg, and H. Kurz, Multiple imprinting in UVbased nanoimprint lithography: related material issues, Microelectronic engineering, pp.61-62, 2002.

H. Schift, L. J. Heyderman, M. Auf-der-maur, and J. Gobrecht, Pattern formation in hot embossing of thin polymer films, Nanotechnology, vol.12, issue.2, pp.173-177, 2001.
DOI : 10.1088/0957-4484/12/2/321

N. Bogdanski, M. Wissen, A. Ziegler, and H. C. Scheer, Temperature-reduced nanoimprint lithography for thin and uniform residual layers, Microelectronic engineering, pp.78-79, 2005.
DOI : 10.1016/j.mee.2004.12.076

P. Carlberg, Lift-off process for nanoimprint lithography, Microelectronic engineering, pp.203-207, 2003.
DOI : 10.1016/S0167-9317(03)00072-8

E. Forsen, D. Nilsson, B. Daniau, S. Francois, and . Ballandras, Fabrication of SAW resonators on Quartz and Langasite using Nano-Imprint Lithography, 2010 IEEE International Ultrasonics Symposium, pp.2091-2094, 2010.
DOI : 10.1109/ULTSYM.2010.5936002

R. Salut, H. Majjad, W. Daniau, and S. Ballandras, Direct writing of high frequency surface acoustic waves using focused ion beam etching, Proc. of the IEEE ultrasonics symposium, pp.2285-2288, 2006.

T. Pastureaud, Etude de nouvelles structures pour la conception et la fabrication de filtres à ondes acoustiques guidées haute fréquence, Thèse de doctorat de l'université de Franche Comté, 2002.

R. Salut, Thin Layers Using Focus Ion Beam Etching, Ferroelectrics, vol.4, issue.1, pp.105-114, 2008.
DOI : 10.1063/1.1758317

S. Ballandras, Rapport n°2 : conception et mise en oeuvre de résonateurs à 5 GHz, 2008.

Y. V. Gulyaev, V. I. Grigorievski, and V. P. Plessky, Comparative analysis of synchronous ??hiccup?? and nonsynchronous saw resonators on quartz, 2006 Multiconference on Electronics and Photonics, pp.83-86, 2006.
DOI : 10.1109/MEP.2006.335634

J. C. Arnault, Surface Science Contribution to the BEN Control on Si(100) and 3C-SiC(100): Towards Ultrathin Nanocrystalline Diamond Films, Chemical Vapor Deposition, vol.114, issue.116, pp.187-195, 2008.
DOI : 10.1002/cvde.200706659

J. C. Arnault, Diamond nanoseeding on silicon: Stability under H2 MPCVD exposures and early stages of growth, Diamond and Related Materials, vol.17, issue.7-10, pp.7-10, 2008.
DOI : 10.1016/j.diamond.2008.01.008

M. Link, C-axis inclined ZnO films deposited by reactive sputtering using an additional blind for shear BAW devices, IEEE Ultrasonics Symposium, 2005., pp.202-205, 2005.
DOI : 10.1109/ULTSYM.2005.1602831

R. Salut, Fabrication of GHz range oscillators stabilized by nano-carbon-diamondbased surface acoustics resonators, Proc. of the IEEE ultrasonics symposium, pp.927-930, 2009.

D. F. Thompson and B. A. Auld, Surface Transverse Wave Propagation Under Metal Strip Gratings, IEEE 1986 Ultrasonics Symposium, pp.261-266, 1986.
DOI : 10.1109/ULTSYM.1986.198749

R. Boudot, A 4.596 GHz frequency synthesis based on a solid-mounted resonator
URL : https://hal.archives-ouvertes.fr/hal-00624305

R. Salut, Fabrication of a 3 GHz oscillator based on nano-carbon-diamond-filmbased guided wave resonator, Proc. of the 24th european frequency time forum, 2010.

P. Selmeier, Recent advances in SAW packaging, 2001 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.01CH37263), pp.283-292, 2001.
DOI : 10.1109/ULTSYM.2001.991627