, 121 3.1. Description of machined part and process plan, p.121
, Limitations Of The Current State Space Modelling Approach In Multistage Machining Processes Due To Operation Variations, AIP Conference Proceedings, pp.1181-231, 2009.
DOI : 10.1063/1.3273636
, Analyses d'un assemblage avec prise en compte des défauts de forme, Proceedings of the 5ème Colloque International Conception et Production Intégrées, 2007.
, Orienting Toleranced Polygonal Parts, The International Journal of Robotics Research, vol.19, issue.12, pp.1147-1170, 2000.
DOI : 10.1177/02783640022068002
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.187.8640
, Generation of manufacturing tolerancing with ISO standards, International Journal of Machine Tools and Manufacture, vol.45, issue.10, pp.1124-1131, 2005.
DOI : 10.1016/j.ijmachtools.2005.01.001
, Best-fit criterion within the context of likelihood maximization estimation, Measurement, vol.43, issue.4, pp.43-538, 2010.
DOI : 10.1016/j.measurement.2009.12.025
URL : https://hal.archives-ouvertes.fr/hal-01427093
, Three-dimensional modelling of manufacturing tolerancing using the ascendant approach, The International Journal of Advanced Manufacturing Technology, vol.38, issue.1???2, pp.279-290, 2008.
DOI : 10.1007/s00170-007-1225-3
, Présentation à partir d'un exemple du calcul des chaînes de cotes 3D, In: Revue Technologies et Formations, vol.68, pp.23-27, 1996.
, A Computation Method for the Consequences of Geometric Errors in Mechanisms, 5th CIRP Seminar on Computer-Aided Tolerancing, 1998.
DOI : 10.1007/978-1-4615-5797-5_15
, Investigation of cutting parameter effects on surface roughness in lathe boring operation by use of a full factorial design, Computers & Industrial Engineering, vol.31, issue.3-4, pp.31-645, 1996.
DOI : 10.1016/S0360-8352(96)00234-3
, Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools, Journal of materials processing technology, pp.143-144, 2003.
DOI : 10.1016/S0924-0136(03)00346-7
, Improved workpiece location accuracy through fixture layout optimization, International Journal of Machine Tools & Manufacture, vol.39, pp.871-883, 1999.
, Chaînes de cotes de fabrication : première partie Modèles. L'ingénieur et le Technicien ce l'Enseignement Technique, 1973.
, Équations formelles et tridimensionnelles des chaînes de dimensions dans les mécanismes, p.4, 1995.
, Geometrical Behavior Laws for Computer-aided Tolerancing, Processding of the 4th CIRP seminar on Computer Aided Design, 1995.
DOI : 10.1007/978-94-009-1529-9_8
, A Study of Optimal-Criteria Identification Based on the Small-Displacement Screw Model, CIRP Annals - Manufacturing Technology, vol.37, issue.1, pp.503-506, 1988.
DOI : 10.1016/S0007-8506(07)61687-4
, The concept of the small displacement torsor in metrology, Advanced Mathematical Tools in Metrology II, Series Advances in Mathematics for Applied Sciences: World Scientific, pp.110-122, 1996.
, Modeling Spaces for Toleranced Objects, The International Journal of Robotics Research, vol.10, issue.5, pp.570-582, 1991.
DOI : 10.1177/027836499101000512
, A model for evaluating the quality of the fixturing of the part from a machining process planning perspective, The International Journal of Advanced Manufacturing Technology, vol.37, issue.1, pp.172-179, 1998.
DOI : 10.1007/BF01188412
, Assessment of the impact of calculation methodologies on defect determinations in manufacturing, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00575902
, Evaluation of different methods in quantification of manufacturing defects, In: Asian International Journal of Science and Technology in Production and Manufacturing Engineering. Special issue, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00633775
, Advancing Cutting Technology, CIRP Annals - Manufacturing Technology, vol.52, issue.2, pp.483-507, 2003.
DOI : 10.1016/S0007-8506(07)60200-5
URL : http://escholarship.org/uc/item/7hd8r1ft.pdf
, General 2-D tolerance analysis of mechanical assemblies with small kinematic adjustments, In: Journal of Design and Manufacturing, vol.5, pp.263-274, 1995.
, A survey of research in the application of tolerance analysis to the design of mechanical assemblies, Research in Engineering Design, vol.97, issue.7, pp.23-37, 1991.
DOI : 10.1007/BF01580066
, The importance of sequence in clamping prismatic workpieces in fixturing processes, Proceeding of the 1996 IEEE, International Conference on Robotics and Automation, 1996.
, Workpiece localization algorithms: Performance evaluation and reliability analysis, Journal of Manufacturing Systems, vol.18, issue.2, pp.113-126, 1999.
DOI : 10.1016/S0278-6125(99)80016-8
, The TTRS : 13 contraints for dimensioning and tolerancing, Geometric design tolerancing theories: theories, standard and applications, pp.122-129, 1998.
, The TTRSs: 13 oriented constraints for dimensioning, tolerancing and inspection, 1997.
, Tolerance Analysis by Computer, Journal of Quality Technology, vol.11, pp.80-87, 1979.
, New metrics for evaluating Monte Carlo tolerance analysis of assemblies, Proceedings of the ASME International Mechanical Engineering Coference and Exposition, 1998.
, Experimental determination of the friction coefficient on the workpiece-fixture contact surface in workholding applications, International Journal of Machine Tools and Manufacture, vol.45, issue.6, pp.45-705, 2004.
DOI : 10.1016/j.ijmachtools.2004.09.021
, Restraint Analysis of Fixtures Which Rely on Surface Contact, Journal of Engineering for Industry, vol.116, issue.2, pp.207-215, 1994.
DOI : 10.1115/1.2901932
, A model to predict minimum required clamp pre-loads in light of fixture-workpiece compliance, International Journal of Machine Tools & Manufacture, pp.41-1031, 2001.
, Determination of minimum clamping forces for dynamically stable fixturing, International Journal of Machine Tools and Manufacture, vol.46, issue.7-8, pp.847-857, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.040
, Active integration of tool deflection effects in end milling. Part 1. Prediction of milled surfaces, International Journal of Machine Tools and Manufacture, vol.46, issue.9, pp.937-944, 2006.
DOI : 10.1016/j.ijmachtools.2005.08.005
, Active integration of tool deflection effects in end milling. Part 2. Compensation of tool deflection, International Journal of Machine Tools and Manufacture, vol.46, issue.9, pp.945-956, 2006.
DOI : 10.1016/j.ijmachtools.2005.08.014
, A matrix approach to the representation of tolerance zones and clearances, The International Journal of Advanced Manufacturing Technology, vol.13, issue.9, pp.630-636, 1997.
DOI : 10.1007/BF01350821
, Fault Diagnosis of Multistage Manufacturing Processes by Using State Space Approach, Journal of Manufacturing Science and Engineering, vol.124, issue.2, pp.313-322, 2002.
DOI : 10.1115/1.1445155
, Linear state space modeling of dimensional machining errors, In: NAMRI/SME, vol.29, pp.541-548, 2001.
, Design and analysis of both dimensional and geometric tolerances in a variational geometry-based design environment In: Concurrent Product Design and Environmentally Conscious Manufacturing: presented at The 1997 International Mechanical Engineering Congress & Exposition, 1997.
, Variational geometry theory for tolerance sensitivity analysis. In: ASME Papers presented at the, ASME International Mechanical Engineering Congress & Exposition, 1995.
, Tolerance sensitivity analysis in a variational design environment, International Journal of Vehicle Design, vol.18, pp.474-486, 1997.
, An investigation of indicators for controlling the quality of a fixture, International Journal of Metrology and Quality Engineering, vol.1, issue.2, pp.71-82, 2010.
DOI : 10.1051/ijmqe/2010016
, A Generalized Geometric Error Model for Multi-Axis Machines, CIRP Annals - Manufacturing Technology, vol.36, issue.1, pp.253-256, 1987.
DOI : 10.1016/S0007-8506(07)62598-0
, Statistical tolerancing: the state of the art, Part I: background, In: Journal of Quality Technology, vol.6, pp.188-195, 1974.
, Statistical tolerancing: the state of the art, Part II: methods for estimating moments, Journal of Quality Technology, vol.7, pp.1-12, 1975.
, Modal metrology of surfaces: new method of form parameterization, 14th International Congress of Metrology, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00997828
, Least squares best fit geometric elements, NPL Report DITC, vol.14089, 1989.
DOI : 10.1007/978-1-4899-3442-0_28
, Modal Expression of Form Defects, 2007.
DOI : 10.1007/1-4020-5438-6_3
URL : https://hal.archives-ouvertes.fr/hal-00333020
, Dimensioning for Interchangeable Manufacture, 1967.
, Investigation of the cutting conditions in milling operations using image texture features, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.25, issue.7, pp.1395-1404, 2008.
DOI : 10.1243/09544054JEM1173
, Generalized 3-D tolerance analysis of mechanical assemblies with small kinematic adjustments, IIE Transactions, vol.2, issue.4, pp.367-377, 1998.
DOI : 10.1115/1.2919346
, Clearance space and deviation space: Application to three-dimensional chain of dimensions and positions, Proceedings of the 3rd CIRP Design Seminar on Computer-Aided Tolerancing, 1993.
, Clearance Space in Volumic Dimensioning, CIRP Annals - Manufacturing Technology, vol.41, issue.1, pp.565-568, 1992.
DOI : 10.1016/S0007-8506(07)61269-4
, Tolerance analysis and synthesis by means of clerance and deviation spaces, In: Geometric product specification and verification: Intergation of functionality, 2003.
, A second-order method for asssembly tolerance analysis, Proceedings of the ASME Design Engineering Technical Conference, 1999.
, Worst Case Tolerance Analysis with Nonlinear Problems, Journal of Engineering for Industry, vol.110, issue.3, pp.232-235, 1988.
DOI : 10.1115/1.3187874
, Root Sum Squares Tolerance Analysis with Nonlinear Problems, Journal of Engineering for Industry, vol.112, issue.4, pp.382-384, 1990.
DOI : 10.1115/1.2899604
, Simultaneous tolerance synthesis through variation propagation modeling of multistage manufacturing processes, In: NAMRI/SME Transactions, pp.31-515, 2003.
, Part Dimensional Error and Its Propagation Modeling in Multi-Operational Machining Processes, Journal of Manufacturing Science and Engineering, vol.125, issue.2, pp.255-262, 2003.
DOI : 10.1115/1.1532007
, Stream of Variation Modeling and Diagnosis of Multi-Station Machining Processes, Proceedings of IMECE 2000, pp.11-81, 2000.
, Tolerance-based process plan evaluation using Monte Carlo simulation, International Journal of Production Research, vol.44, issue.23, pp.4871-4891, 2004.
DOI : 10.1016/S0951-5240(96)00005-5
, Analysis of minimum clamping force, International Journal of Machine Tools and Manufacture, vol.35, issue.9, pp.1213-1224, 1995.
DOI : 10.1016/0890-6955(94)00113-X
, A Study on the Motion Accuracy of NC Machine Tools (7th Report), Journal of the Japan Society for Precision Engineering, vol.60, issue.5, pp.718-723, 1994.
DOI : 10.2493/jjspe.60.718
, Accuracy Inspection of NC Machine Tools by Double Ball Bar Method, In: Accuracy Inspection of NC Machine Tools by Double Ball Bar Method, 1993.
, Three-dimensional identification and quantification of manufacturing defects, National Polytechnic Institude of Grenoble, Dissertation of MSc, 2006.
, Proposition de résolution numérique des problème d'analyse de tolérance en fabrication: approache 3D, 2009.
, Volumetric accuracy analysis based on generalized geometric error model in multi-axis machine tools, Mechanism and Machine Theory, pp.207-219, 1991.
DOI : 10.1016/0094-114X(91)90084-H
, The Prediction of Surface Accuracy in End Milling, Journal of Engineering for Industry, vol.104, issue.3, pp.272-278, 1982.
DOI : 10.1115/1.3185830
, Jacobian-based modeling of dispersions affecting predefined functional requirements of mechanical assemblies, Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning, 1999.
, Tolerance Analysis and Synthesis Using Jacobian Transforms, CIRP Annals - Manufacturing Technology, vol.49, issue.1, pp.359-362, 2000.
DOI : 10.1016/S0007-8506(07)62964-3
, Monte Carlo simulation of tolerance synthesis equations, International Journal of Production Research, vol.39, issue.11, pp.2395-2406, 2001.
DOI : 10.1080/00207540110039198
, Modeling Dispersions Affecting Pre-Defined Functional Requirements of Mechanical Assemblies Using Jacobian Transforms, Proceedings of the 2nd IDMME Conference, 1998.
DOI : 10.1007/978-94-015-9198-0_47
, Tolerance Analysis And Synthesis Using Virtual Joints, Proceeding 6th CIRP International Seminar on Computer-Aided Tolerancing, 1999.
DOI : 10.1007/978-94-017-1705-2_41
, Statistical Models for the Relationship between Production Errors and the Position Tolerance of a Hole, CIRP Annals - Manufacturing Technology, vol.39, issue.1, pp.569-572, 1990.
DOI : 10.1016/S0007-8506(07)61121-4
, Improved workpiece location accuracy through fixture layout optimization, International Journal of Machine Tools and Manufacture, vol.39, issue.6, pp.871-883, 1999.
DOI : 10.1016/S0890-6955(98)00072-8
, Relative positioning of toleranced polyhedral parts in an assembly, IIE Transactions, vol.2, issue.4, pp.323-336, 2001.
DOI : 10.1109/70.182674
, Modelling of Five-Axis Machine Tool Metrology Models Using the Matrix Summation Approach, The International Journal of Advanced Manufacturing Technology, vol.21, issue.4, pp.243-248, 2003.
DOI : 10.1007/s001700300028
, Kinematic analysis of dimensional variation propagation for multistage machining process with general fixture lay outs, IEEE Transactions on Automation Science and Enginerring, vol.4, 2007.
, Kinematic analysis of dimesional variation propagation for multistage machining processes with general fixture layouts, IEEE transaction on Automation Science and Engineering, 2007.
, Three-dimensional modelling of geometric defaults to optimize a manufactured part setting, The International Journal of Advanced Manufacturing Technology, vol.125, issue.3-4, pp.342-348, 2006.
DOI : 10.1007/s00170-005-2519-y
, Geometrical checking by virtual gauge, including measurement uncertainties, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.513-516, 2008.
DOI : 10.1016/j.cirp.2008.03.112
URL : https://hal.archives-ouvertes.fr/hal-01411259
, A Force-Controlled Clamping Element for intelligent Fixturing, CIRP Annals - Manufacturing Technology, vol.46, issue.1, pp.265-268, 1997.
DOI : 10.1016/S0007-8506(07)60822-1
, Calibration of a five-axis machine tool for position independent geometric error parameters using a telescopic magnetic ball bar, Proceedings of the 33rd International MATADOR Conference, 1999.
, Review of statistical approaches to tolerance analysis, Computer-Aided Design, vol.27, issue.1, pp.6-15, 1995.
DOI : 10.1016/0010-4485(95)90748-5
, Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics, International Journal of Machine Tools and Manufacture, vol.40, issue.8, pp.1199-1213, 2000.
DOI : 10.1016/S0890-6955(99)00105-4
, Process planning strategy based on fixturing indicator evaluation, The International Journal of Advanced Manufacturing Technology, vol.14, issue.9-10, pp.913-922, 2005.
DOI : 10.1007/s00170-003-1928-z
, Shape Interrogation for Computer Aided Design and Manufacturing, 2002.
DOI : 10.1007/978-3-642-04074-0
, Analysis of the effects of fixture clamping sequence on part location errors, International Journal of Machine Tools and Manufacture, vol.44, issue.4, pp.373-382, 2004.
DOI : 10.1016/j.ijmachtools.2003.10.015
, Modeling, measurement and error compensation of multi-axis machine tools. Part I: theory, International Journal of Machine Tools and Manufacture, vol.40, issue.10, pp.1535-1546, 2000.
DOI : 10.1016/S0890-6955(99)00101-7
, Geometric and force errors compensation in a 3-axis CNC milling machine, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, pp.1283-1291, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.016
, Error compensation in machine tools ??? a review, International Journal of Machine Tools and Manufacture, vol.40, issue.9, pp.1235-1256, 2000.
DOI : 10.1016/S0890-6955(00)00009-2
, Error compensation in machine tools ??? a review, International Journal of Machine Tools and Manufacture, vol.40, issue.9, pp.1257-1284, 2000.
DOI : 10.1016/S0890-6955(00)00010-9
, Tool deflection compensation in peripheral milling of curved geometries, International Journal of Machine Tools and Manufacture, vol.46, issue.15, pp.2036-2043, 2006.
DOI : 10.1016/j.ijmachtools.2006.01.004
, Tolerancing a solid model with a kinematic formulation, Computer-Aided Design, vol.26, issue.6, pp.465-476, 1994.
DOI : 10.1016/0010-4485(94)90068-X
, Identification of Alignment Errors in Five-Axis Machining Centers., Transactions of the Japan Society of Mechanical Engineers Series C, vol.60, issue.575, pp.2475-2483, 1994.
DOI : 10.1299/kikaic.60.2475
, Computer Aided Tolerancing - Solver and Post Processor Analysis, In: Advances in Design, 2006.
DOI : 10.1007/1-84628-210-1_40
, The Impact of Surface Errors on the Location and Orientation of a Cylindrical Workpiece in a Fixture, Journal of Manufacturing Science and Engineering, vol.123, issue.2, pp.325-330, 2001.
DOI : 10.1115/1.1367269
, Force-assembly with friction, IEEE Transactions on Robotics and Automation, vol.10, issue.4, pp.465-479, 1994.
DOI : 10.1109/70.313097
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.93.5227
, Identification of machining defects by Small Displacement Torsor and form parameterization method, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00565431
, Performances d'un moyen de mesure in situe sur M.O.C.N. In: Contrôles essais mesures, pp.22-35, 2008.
, Using Monte-Carlo variance reduction in statistical tolerance synthesis, Computer-Aided Design, vol.29, issue.1, pp.63-69, 1997.
DOI : 10.1016/S0010-4485(96)00050-4
, Locating completeness evaluation and revision in fixture plan, Robotics and Computer-Integrated Manufacturing, vol.21, issue.4-5, pp.368-378, 2005.
DOI : 10.1016/j.rcim.2004.11.012
, Modeling the errors of multi-axis machines: a general methodology, Precision Engineering, vol.14, issue.1, pp.5-19, 1992.
DOI : 10.1016/0141-6359(92)90137-L
, Spindle thermal drift measurement using the laser ball bar, Precision Engineering, vol.18, issue.2-3, pp.118-128, 1996.
DOI : 10.1016/0141-6359(95)00053-4
, Modelling geometric and thermal errors in a five-axis cnc machine tool, International Journal of Machine Tools and Manufacture, vol.35, issue.9, pp.1321-1337, 1994.
DOI : 10.1016/0890-6955(94)00048-O
, Use of the lognormal distribution for the coefficients of friction and wear, Reliability Engineering & System Safety, vol.93, issue.10, pp.1574-1576, 2008.
DOI : 10.1016/j.ress.2007.09.005
, Error modelling and measurement for the rotary table of five-axis machine tools, The International Journal of Advanced Manufacturing Technology, vol.5, issue.1, pp.656-663, 1998.
DOI : 10.1007/BF01192286
, Threedimensional functional tolerancing with proportioned assemblies clearance volume (U.P.E.L: Unions pondérées d'espaces de liberté ): application to setup planning, 5th CIRP Seminar on Computer-Aided Tolerancing, 1998.
DOI : 10.1007/978-1-4615-5797-5_13
, A computer aided tolerancing model: proportioned assembly clearance volume, Computer-Aided Design, vol.31, issue.13, pp.31-805, 1999.
DOI : 10.1016/S0010-4485(99)00055-X
URL : https://hal.archives-ouvertes.fr/hal-01202586
, Operations on polytopes: application to tolerance analysis, 6th CIRP International Seminar on Computer-Aided Tolerancing, 1999.
DOI : 10.1007/978-94-017-1705-2_43
URL : https://hal.archives-ouvertes.fr/hal-00604749
, Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steel, Materials & Design, vol.25, issue.6, pp.507-513, 2004.
DOI : 10.1016/j.matdes.2003.12.011
, Contribution à la définition d'un moyen unifié de gestion de la géométrie réaliste basé sur le calculs des lois de comportement des mécanismes, 2001.
, Modélisation et quantification tridimensionnelles des écarts de fabrication pour la simulation d'usinage, 2005.
, Process planning geometrical simulation: compared approaches between intergrated CAD/CAM system and Small Displacement Torsor model, IDMME, International Conference on Integrated Manufacturing in Mechanical Engineering, 2005.
, Identification and compensation of systematic deviations particular to 5-axis machining centers, International Journal of Machine Tools and Manufacture, vol.43, issue.8, pp.771-780, 2003.
DOI : 10.1016/S0890-6955(03)00053-1
, Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, pp.1333-1342, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.013
, Tolerances in computer-aided geometric design, The Visual Computer, vol.2, issue.4, pp.214-226, 1987.
DOI : 10.1007/BF01952828
, Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors, Precision Engineering, vol.33, issue.2, pp.194-201, 2009.
DOI : 10.1016/j.precisioneng.2008.06.001
, Contribution à l'élaboration d'un modèle 3D de simulation de fabrication pour l'analyse et la synthèse des tolérances, le modèle MMP, National Polytechnic Institute of Grenoble, 2005.
, 3D Transfer of Tolerances Using a SDT Approach: Application to Turning Process, Journal of Computing and Information Science in Engineering, vol.3, issue.1, pp.45-53, 2003.
DOI : 10.1115/1.1565073
URL : https://hal.archives-ouvertes.fr/hal-00366259
, Simulation of the manufacturing process (2) Analysis of its consequences on a functional tolerance, The 9th CIRP International Seminar on Computer Aided Tolerancing, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00375246
, Simulation of the Manufacturing Process, Generation of a Model of the Manufactured Parts, 2007.
DOI : 10.1007/978-0-387-49864-5_64
URL : https://hal.archives-ouvertes.fr/hal-00466148
, From the nominal model to a model of manufactured parts in a CAD context, Asisan Internation Journal of Science and Technology in Production and Manufacturing Engineering, vol.2, pp.35-42, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00575886
, Tolerancing for manufacturing: A three-dimensional model, International Journal of Production Research, vol.39, issue.8, pp.1625-1648, 2001.
DOI : 10.1080/00207540010024104
URL : https://hal.archives-ouvertes.fr/hal-00366281
, Manufacturing Process Simulation for Tolerance Analysis and Synthesis, The 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, 2004.
DOI : 10.1007/1-4020-3482-2_15
URL : https://hal.archives-ouvertes.fr/hal-01355487
, Simulation de fabrication avec incertitudes, le modèle MMP(Model of Manufactured Part), Proceedings of the 18 ièm e Congrès Français de Mécanique, 2007.
, Optimisation of machining fixture layout under multi-constraints, International Journal of Machine Tools and Manufacture, vol.46, issue.12-13, pp.1291-1300, 2006.
DOI : 10.1016/j.ijmachtools.2005.10.014
, Off-line modelling and planning of optimal clamping forces for an intelligent fixturing system, International Journal of Machine Tools and Manufacture, vol.39, issue.2, pp.253-271, 1999.
DOI : 10.1016/S0890-6955(98)00026-1
, Deformation control through fixture layout design and clamping force optimization, In: International Journal of Advanced Manufacturing Technology, vol.38, pp.860-867
, Representation of geometric variations using matrix transforms for statistical tolerance analysis in assemblies, [1993] Proceedings IEEE International Conference on Robotics and Automation, pp.1050-4729, 1993.
DOI : 10.1109/ROBOT.1993.292164
, Representation of geometric variations using matrix transforms for statistical tolerance analysis in assemblies, [1993] Proceedings IEEE International Conference on Robotics and Automation, pp.191-210, 1994.
DOI : 10.1109/ROBOT.1993.292164
, Designing Assemblies, Research in Engineering Design, vol.11, issue.4, pp.229-253, 1999.
DOI : 10.1007/s001630050017
, Toward a Theory for Design of Kinematically Constrained Mechanical Assemblies, The International Journal of Robotics Research, vol.18, issue.12, pp.1235-1248, 1999.
DOI : 10.1177/02783649922067834
, From Unambiguously Defined Geometry to the Perfect Quality Control Loop, CIRP Annals - Manufacturing Technology, vol.42, issue.1, pp.615-618, 1993.
DOI : 10.1016/S0007-8506(07)62522-0
, The direct linearization method applied to position error in kinematic linkages, Mechanism and Machine Theory, pp.39-681, 2004.
DOI : 10.1016/j.mechmachtheory.2004.01.001
, Automated modular fixture planning: Accuracy, clamping, and accessibility analyses, Robotics and Computer-Integrated Manufacturing, vol.14, issue.1, pp.14-17, 1998.
DOI : 10.1016/S0736-5845(97)00025-2
, An experimental evaluation of coefficients of static friction of common workpiece???fixture element pairs, International Journal of Machine Tools and Manufacture, vol.40, issue.4, pp.467-488, 2000.
DOI : 10.1016/S0890-6955(99)00082-6
, A Near-Optimal Probing Strategy for Workpiece Localization, IEEE Transactions on Robotics, vol.20, issue.4, pp.668-676, 2004.
DOI : 10.1109/TRO.2004.829474
, Locating error analysis and tolerance assignment for computer-aided fixture design, International Journal of Production Research, vol.116, issue.15, pp.3529-3545, 2001.
DOI : 10.1080/00207540110056171
, Dynamic Modeling for Machine Tool Thermal Error Compensation, Journal of Manufacturing Science and Engineering, vol.125, issue.2, pp.245-254, 2003.
DOI : 10.1115/1.1557296
, Measurement of spindle thermal errors in machine tool using hemispherical ball bar test, International Journal of Machine Tools and Manufacture, vol.44, issue.2-3, pp.333-340, 2004.
DOI : 10.1016/j.ijmachtools.2003.08.010
, Clamping Fault Detection in a Fixturing System, Journal of Manufacturing Processes, vol.2, issue.3, pp.194-202, 2000.
DOI : 10.1016/S1526-6125(00)70121-6
, Advanced tolerancing techniques, 1997.
, Modeling Variation Propagation in Machining Systems With Different Configurations, Manufacturing, 2002.
DOI : 10.1115/IMECE2002-33581
, State space modeling of dimensional variation propagation in multistage machining process using differential motion vectors, IEEE Transactions on Robotics and Automation, vol.19, issue.2, pp.296-309, 2003.
DOI : 10.1109/TRA.2003.808852