&. X. Walton and . Zhou, Inter-relationship between alloy composition, passive film composition and pitting behaviour of Al-Mo and Al-Mo-Si metastable alloys, Corrosion Science, pp.40-731, 1998.

L. Yate, J. C. Caicedo, A. Hurtado-macis, F. J. Espinoza-beltran, G. Zambrano et al., Composition and mechanical properties of AlC, AlN and AlCN thin films obtained by r.f. magnetron sputtering, Surface and Coatings Technology, vol.203, issue.13, pp.203-1904, 2009.
DOI : 10.1016/j.surfcoat.2009.01.023

H. Zhang, K. Huang, &. Spencer, and . Shi, Nanomechanics of MgAl intermetallic compounds, Surface and Coatings Technology, vol.10, issue.204, pp.2118-2122, 2010.

X. Yuan, &. M. Wang, and . Wang, Influence of nitrogen ion implantation fluences on surface structure and tribological properties of SiC ceramics in water-lubrication, Applied Surface Science, pp.255-5079, 2009.

. Enfin, Mg présentent à la fois de bonnes propriétés mécaniques (? 400 HV) et de bonnes propriétés électrochimiques. Par ailleurs, leur caractère sacrificiel par rapport à l'acier est conservé lors de l'immersion. Ces architectures possèdent donc la meilleure combinaison de propriétés. Dans la suite de cette étude, l'architecture Al-Mn/Al-Mg 15 nm est considérée comme la meilleure architecture, compte tenu de son caractère sacrificiel, de ses bonnes propriétés mécaniques et de sa nanostructuration, Une étude plus poussée sur cette architecture va être faite pour déterminer si cette architecture peut supporter d'être appliquée sur un matériau avant la mise en forme de ce dernier

. Bibliographie, Corrosion behavior of nanolayered TiN/NbN multilayer coatings prepared by reactive direct current magnetron sputtering process, Thin Solid Films, pp.460-133, 2004.

]. H. Barshilia-04b, &. K. Barshilia, and . Rajam, Structure and properties of reactive DC magnetron sputtered TiN/NbN hard superlattices, Surface and Coatings Technology, vol.183, issue.2-3, pp.174-183, 2004.
DOI : 10.1016/j.surfcoat.2003.09.070

H. C. Barshilia, K. S. Rajam, A. Jain, K. Gopinadhan, and &. S. Chaudhary, A comparative study on the structure and properties of nanolayered TiN/NbN and TiAlN/TiN multilayer coatings prepared by reactive direct current magnetron sputtering, Thin Solid Films, vol.503, issue.1-2, pp.503-158, 2006.
DOI : 10.1016/j.tsf.2005.12.074

F. Buciuman, F. Patcas, R. Cracium, and &. D. Zahn, Vibrational spectroscopy of bulk and supported manganese oxides, Physical Chemistry Chemical Physics, vol.1, issue.1, pp.185-190, 1998.
DOI : 10.1039/a807821a

C. Charrier, P. Jacquot, E. Denisse, J. P. Millet, and &. H. Mazille, Aluminium and Ti/Al multilayer PVD coatings for enhanced corrosion resistance, Surface and Coatings Technology, vol.90, issue.1-2, pp.90-119, 1997.
DOI : 10.1016/S0257-8972(96)03080-0

]. L. Dobrzanski, K. Lukaszkowicz, and &. A. Kriz, Properties of the multi-layer Ti/CrN and Ti/TiAlN coatings deposited with the PVD technique onto the brass substrate, Journal of Materials Processing Technology, vol.143, issue.144, pp.143-144, 2003.
DOI : 10.1016/S0924-0136(03)00351-0

&. G. Fei and . Wilcox, Electrodeposition of zinc???nickel compositionally modulated multilayer coatings and their corrosion behaviours, Surface and Coatings Technology, vol.200, issue.11, pp.3533-3539, 2006.
DOI : 10.1016/j.surfcoat.2004.08.183

M. Herranen, U. Wiklund, J. Carlsson, and &. S. Hogmark, Corrosion behaviour of Ti/TiN multilayer coated tool steel, Surface and Coatings Technology, vol.99, issue.1-2, pp.99-191, 1998.
DOI : 10.1016/S0257-8972(97)00525-2

. Davidr and . Lide, Handbook of chemistry and physics, 1994.

M. X. Liu, F. Maa, P. Huanga, J. M. Zhang, and &. W. Xu, Scale dependent plastic deformation of nanomultilayers with competitive effects of interphase boundary and grain boundary, Materials Science and Engineering: A, vol.477, issue.1-2, pp.477-295, 2008.
DOI : 10.1016/j.msea.2007.05.040

]. T. Nakayama, K. Yamamoto, H. Satoh, and &. T. Konno, Structure and corrosion properties of A1/Si and Fe/Zr multilayers, Materials Science and Engineering A, pp.198-217, 1995.

&. S. Herranen and . Hogmark, Influence of lamellae thickness on the corrosino behaviour of multilayered PVD TiN/CrN coatings, Thin Solid Films, vol.348, pp.202-209, 1999.

]. A. Santana, A. Karimia, V. H. Derflingerb, and &. A. Schütze, Microstructure and mechanical behavior of TiAlCrN multilayer thin films, Surface and Coatings Technology, pp.177-178, 2004.

G. Song, A. Atrens, D. St-john, and &. Y. Li, The electrochemical corrosion of pure magnesium in 1N NaCl, Nanostructured Materials, vol.39, issue.5, pp.855-875, 1997.

. La-présence-de, 5 % de déformation prouve que l'hypothèse du durcissement lié à des contraintes imposées par le revêtement est questionnable. En effet, l'apparition de fissures entraînerait une relaxation des contraintes dans le revêtement et donc la disparition de l'effet durcissant. Ce dernier est donc un durcissement par effet barrière : les dislocations se retrouvent probablement piégées à l'interface substrat

. La-figure-5, 7 est un schéma montrant l'apparition de dislocations au sein du substrat. Ce schéma illustre la section de l'éprouvette avec le revêtement d'aluminium à gauche et l'acier à droite

. Enfin, le revêtement multicouches reste sacrificiel pendant l'immersion pour une déformation de 0,5 %. Pour une déformation de 1,5 %, l'acier n'est plus protégé localement en raison du nombre important de fissures dans le revêtement qui mène à une dissolution résiduelle de l'acier

E. Bibliographie, L. Bonetti, &. E. Pasquini, and . Sampaolesi, The influence of grain siez on the mechanical properties of nanocrystalline aluminium, Nanostructured Materials, vol.9, pp.611-614, 1997.

D. Large, R. Sabot, and &. X. Feaugas, Influence of stress???strain field on the dissolution process of polycrystalline nickel in H2SO4 solution: An original in situ method, Electrochimica Acta, vol.52, issue.27, pp.52-7746, 2007.
DOI : 10.1016/j.electacta.2006.12.064

M. Sahal, J. Creus, R. Sabot, and &. X. Feaugas, Consequences of plastic strain on the dissolution process of polycrystalline nickel in H2SO4 solution, Scripta Materialia, vol.51, issue.9, pp.51-869, 2004.
DOI : 10.1016/j.scriptamat.2004.07.004

M. Sahal, J. Creus, R. Sabot, and &. X. Feaugas, The effects of dislocation patterns on the dissolution process of polycrystalline nickel, Acta Materialia, vol.54, issue.8, pp.2157-2167, 2006.
DOI : 10.1016/j.actamat.2006.01.006

L. Stainier, A. M. Cuitino, and &. M. Orti, A micromechanical model of hardening, rate sensitivity and thermal softening in BCC single crystals, Journal of the Mechanics and Physics of Solids, vol.50, issue.7, pp.50-1511, 2002.
DOI : 10.1016/S0022-5096(01)00114-4

URL : https://hal.archives-ouvertes.fr/hal-01004846