I. Etsion and A. Sharoni, The Effect of Coning on Radial Forces in Misaligned Radial Face Seals, Journal of Lubrication Technology, vol.102, issue.2, pp.279-288, 1980.
DOI : 10.1115/1.3251451

J. M. Wileman, Dynamic Analysis of Eccentric Mechanical Face Seals, Thèse de doctorat, Georgia Institut of Technology, 1994.

J. M. Wileman, Dynamic Response of Eccentric Face Seals to Synchronous Shaft Whirl, Journal of Tribology, vol.126, issue.2, pp.301-309, 2004.
DOI : 10.1115/1.1645294

V. Person, B. Tournerie, and J. Frêne, A Numerical Study of the Stable Dynamic Behavior of Radial Face Seals With Grooved Faces, Journal of Tribology, vol.119, issue.3, pp.507-514, 1997.
DOI : 10.1115/1.2833527

N. Brunetière, Les Garnitures Mécaniques : Etude Théorique et Expérimentale, HDR, 2010.

C. Minet and A. O. Lebeck, Lubrification Mixte dans les Etanchéités Dynamique : Application aux Garnitures Mécaniques Technique de l'Ingénieur : Garnitures Mécaniques, Montage et Maintenance Principle and Design of Mechanical Face Seal, Thèse de doctorat, 1991.

D. Dowson, History of Tribology, 1998.

D. Summer-smith, Laboratory Investigation of the Performance of a Radial Face Seal, Proceeding of International Conference of Fluid Sealing

A. O. Lebeck, A Mixed Friction Hydrostatic Mechanical Face Seal Model with Thermal Rotation and Wear, A S L E Transactions, vol.4, issue.1, pp.375-387, 1979.
DOI : 10.1080/05698198008982982

H. Lubbinge, On the Lubrication of Mechanical Face Seals, 1999.

B. S. Nau, Hydrodynamic in Face Seals, Proceeding of 3 st International Conference on Fluid Sealing, pp.73-120, 1967.

J. A. Greenwood and J. B. Williamson, Contact of Nominally Flat Surfaces, Proceedings of the Royal Society, pp.300-319, 1966.
DOI : 10.1098/rspa.1966.0242

J. A. Greenwood and J. H. Tripp, The Elastic Contact of Rough Spheres, Journal of Applied Mechanics, vol.34, issue.1, pp.153-159, 1967.
DOI : 10.1115/1.3607616

J. A. Greenwood and J. H. Tripp, The contact of two nominally flat rough surfaces, Proceedings of the Institution of Mechanical Engineers, pp.1970-71
DOI : 10.1243/PIME_PROC_1970_185_069_02

T. Hisakado, Effect of surface roughness on contact between solid surfaces, Wear, vol.28, issue.2, pp.217-234, 1974.
DOI : 10.1016/0043-1648(74)90163-X

A. W. Bush, R. D. Gubson, and T. R. Thomas, The elastic contact of a rough surface, Wear, vol.35, issue.1, pp.87-111, 1975.
DOI : 10.1016/0043-1648(75)90145-3

O. 'callaghan, M. Cameron, and M. A. , Static Contact Under Load between Nominally Flat Surfaces in which Deformation is Purely Elastic, Wear, issue.36, pp.79-97, 1976.

H. Ishigaki and I. Kawaguchi, A simple estimation of the elastic-plastic deformation of contacting asperities, Wear, vol.54, issue.1, pp.157-164, 1979.
DOI : 10.1016/0043-1648(79)90053-X

K. L. Woo and T. R. Thomas, Contact of rough surfaces: A review of experimental work, Wear, vol.58, issue.2, pp.331-340, 1980.
DOI : 10.1016/0043-1648(80)90162-3

J. I. Mccool, Comparison of models for the contact of rough surfaces, Wear, vol.107, issue.1, pp.37-60, 1986.
DOI : 10.1016/0043-1648(86)90045-1

W. R. Chang, I. Etsion, and D. B. Bogy, An Elastic-Plastic Model for the Contact of Rough Surfaces, Journal of Tribology, vol.109, issue.2, pp.257-263, 1987.
DOI : 10.1115/1.3261348

Y. Zhao, D. M. Maletta, and L. Chang, An Asperity Microcontact Model Incorporating the Transition From Elastic Deformation to Fully Plastic Flow, Journal of Tribology, vol.122, issue.1, pp.257-263, 2000.
DOI : 10.1115/1.555332

F. Robbe-valloire, B. Paffoni, and R. Progri, Load transmission by elastic, elasto-plastic or fully plastic deformation of rough interface asperities, Mechanics of Materials, vol.33, issue.11, pp.617-633, 2001.
DOI : 10.1016/S0167-6636(01)00074-6

L. Kogut and I. Etsion, Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat, Journal of Applied Mechanics, vol.69, issue.5, pp.657-662, 2002.
DOI : 10.1115/1.1490373

L. Kogut and I. Etsion, A Finite Element Based Elastic-Plastic Model for the Contact of Rough Surfaces, Tribology Transactions, vol.55, issue.3, pp.383-390, 2003.
DOI : 10.1115/1.555332

X. Tian and B. Bhusham, A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle, Journal of Tribology, vol.118, issue.1, pp.33-41, 1996.
DOI : 10.1115/1.2837089

J. J. Kalker and Y. Van-randen, A minimum principle for frictionless elastic contact with application to non-Hertzian half-space contact problems, Journal of Engineering Mathematics, vol.9, issue.2, pp.193-206, 1972.
DOI : 10.1007/BF01535102

W. T. Chen, Computation of stresses and displacements in a layered elastic medium, International Journal of Engineering Science, vol.9, issue.9, pp.775-800, 1971.
DOI : 10.1016/0020-7225(71)90072-3

J. Allwood, Survey and Performance Assessment of Solution Methods for Elastic Rough Contact Problems, Journal of Tribology, vol.127, issue.1, pp.10-23, 2005.
DOI : 10.1115/1.1828073

I. A. Polonsky and L. M. Keer, Scale Effects of Elastic-Plastic Behavior of Microscopic Asperity Contacts, Journal of Tribology, vol.118, issue.2, pp.335-340, 1996.
DOI : 10.1115/1.2831305

M. B. Dobrica, M. Fillon, and P. Maspeyrot, Influence of Mixed-Lubrication and Rough Elastic-Plastic Contact on the Performance of Small Fluid Film Bearings, Tribology Transactions, vol.23, issue.6, pp.699-717, 2008.
DOI : 10.1016/0043-1648(78)90157-6

S. T. Tzeng and E. Saibel, Surface Roughness Effect on Slider Bearing Lubrication, A S L E Transactions, vol.85, issue.3, pp.334-338, 1967.
DOI : 10.1080/05698196708972191

H. Christensen, Stochastic models for hydrodynamic lubrication of rough surfaces, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.184, issue.1969, pp.1013-1022, 1970.
DOI : 10.1243/PIME_PROC_1969_184_074_02

H. Christensen and K. Tonder, The Hydrodynamic Lubrication of Rough Bearing Surfaces of Finite Width, Journal of Lubrication Technology, vol.93, issue.3, pp.324-330, 1971.
DOI : 10.1115/1.3451579

H. Christensen and K. Tonder, The Hydrodynamic Lubrication of Rough Journal Bearings, Journal of Lubrication Technology, vol.95, issue.2, pp.166-171, 1973.
DOI : 10.1115/1.3451759

H. G. Elrod, Thin-Film Lubrication Theory for Newtonian Fluids With Surfaces Possessing Striated Roughness or Grooving, Journal of Lubrication Technology, vol.95, issue.4, pp.484-489, 1973.
DOI : 10.1115/1.3451862

S. K. Rhow and H. G. Elrod, The Effects on Bearing Load-Carrying Capacity of Two-Sided Striated Roughness, Journal of Lubrication Technology, vol.96, issue.4, pp.554-560, 1974.
DOI : 10.1115/1.3452486

L. S. Chow and H. S. Cheng, Influence of Surface Roughness on Average Film Thickness between Lubricated Rollers, ASLE Transactions, vol.18, pp.117-124, 1976.

N. Patir and H. S. Cheng, An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication, Journal of Lubrication Technology, vol.100, issue.1, pp.12-17, 1978.
DOI : 10.1115/1.3453103

N. Patir and H. S. Cheng, Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces, Journal of Lubrication Technology, vol.101, issue.2, pp.220-230, 1979.
DOI : 10.1115/1.3453329

J. Peklenik, New developments in surface characterization and measurements by means of random process analysis, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Conference Proceedings 1964-1970 (vols 178-184), Various titles labelled Volumes A to S, vol.182, issue.311, pp.1967-68108
DOI : 10.1243/PIME_CONF_1967_182_309_02

J. H. Tripp, Surface Roughness Effects in Hydrodynamic Lubrication: The Flow Factor Method, Journal of Lubrication Technology, vol.105, issue.3, pp.458-465, 1983.
DOI : 10.1115/1.3254641

K. Tonder, The Lubrication of Unidirectional Striated Roughness: Consequences for Some General Roughness Theories, Journal of Tribology, vol.108, issue.2, pp.167-170, 1986.
DOI : 10.1115/1.3261155

A. O. Lebeck, Parallel Sliding Load Support in the Mixed Friction Regime. Part 1???The Experimental Data, Journal of Tribology, vol.109, issue.1, pp.189-195, 1987.
DOI : 10.1115/1.3261317

A. O. Lebeck, Parallel Sliding Load Support in the Mixed Friction Regime. Part 2???Evaluation of the Mechanisms, Journal of Tribology, vol.109, issue.1, pp.196-205, 1987.
DOI : 10.1115/1.3261319

Y. Hu and L. Q. Zheng, Some Aspects of Determining the Flow Factors, Journal of Tribology, vol.111, issue.3, pp.525-531, 1989.
DOI : 10.1115/1.3261961

S. R. Harp and R. F. Salant, An Average Flow Model of Rough Surface Lubrication With Inter-Asperity Cavitation, Journal of Tribology, vol.123, issue.1, pp.134-143, 2001.
DOI : 10.1115/1.1332397

T. W. Kim and Y. J. Cho, The Flow Factors Considering the Elastic Deformation for the Rough Surface with a Non-Gaussian Height Distribution, Tribology Transactions, vol.228, issue.2, pp.213-220, 2007.
DOI : 10.1017/CBO9780511569654

F. Sadeghi and P. C. Sui, Thermal Elastohydrodynamic Lubrication of Rough Surfaces, Journal of Tribology, vol.112, issue.2, pp.341-346, 1990.
DOI : 10.1115/1.2920262

C. H. Venner, T. Napel, and W. E. , Surface Roughness Effects in an EHL Line Contact, Journal of Tribology, vol.114, issue.3, pp.612-622, 1992.
DOI : 10.1115/1.2920926

A. A. Lubrecht, T. Napel, W. E. Bosma, and R. , Multigrid an Alternitive Method for Calculating Film Thickness and Pressure Profile in Elastohydrodynamic Lubricated Line Contact, Journal of Tribology, vol.100, issue.4, pp.551-556, 1986.

X. Ai and H. S. Cheng, A Transient EHL Analysis for Line Contacts With Measured Surface Roughness Using Multigrid Technique, Journal of Tribology, vol.116, issue.3, pp.549-558, 1994.
DOI : 10.1115/1.2928879

X. Jiang, D. Y. Hua, H. S. Cheng, X. Ai, and S. C. Lee, A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact, Journal of Tribology, vol.121, issue.3, pp.481-491, 1999.
DOI : 10.1115/1.2834093

Q. J. Wang, D. Zhu, H. S. Cheng, T. Yu, X. Jiang et al., Mixed Lubrication Analyses by a Macro-Micro Approach and a Full-Scale Mixed EHL Model, Journal of Tribology, vol.126, issue.1, pp.81-91, 2004.
DOI : 10.1115/1.1631017

D. Zhu and Y. Hu, A Computer Program Package for the Prediction of EHL and Mixed Lubrication Characteristics, Friction, Subsurface Stresses and Flash Temperatures Based on Measured 3-D Surface Roughness, Tribology Transactions, vol.93, issue.3, pp.383-390, 2001.
DOI : 10.1115/1.3453342

M. B. Dobrica, M. Fillon, and P. Maspeyrot, Mixed Elastohydrodynamic Lubrication in a Partial Journal Bearing???Comparison Between Deterministic and Stochastic Models, Journal of Tribology, vol.128, issue.4, pp.778-788, 2006.
DOI : 10.1115/1.2345404

G. Bayada and M. Chambat, New Models in the Theory of the Hydrodynamic Lubrication of Rough Surfaces, Journal of Tribology, vol.110, issue.3, pp.402-407, 1988.
DOI : 10.1115/1.3261642

G. Bayada and J. B. Faure, A Double Scale Analysis Approach of the Reynolds Roughness Comments and Application to the Journal Bearing, Journal of Tribology, vol.111, issue.2, pp.323-330, 1989.
DOI : 10.1115/1.3261917

M. Kane, Contribution à l'étude de l'influence de la rugosité et des effets non- Newtoniens dans les contacts sévères lubrifiés, Thèse de doctorat, 2003.

G. Buscaglia and M. Jaï, A new numerical scheme for non uniform homogenized problems: Application to the non linear Reynolds compressible equation, Mathematical Problems in Engineering, vol.7, issue.4, pp.355-378, 2000.
DOI : 10.1155/S1024123X01001685

M. Jai and B. Bou-said, A Comparison of Homogenization and Averaging Techniques for the Treatment of Roughness in Slip-Flow-Modified Reynolds Equation, Journal of Tribology, vol.124, issue.2, pp.327-335, 2002.
DOI : 10.1115/1.1402131
URL : https://hal.archives-ouvertes.fr/hal-00454934

G. Bayada, S. Martin, and C. Vazquez, An Average Flow Model of the Reynolds Roughness Including a Mass-Flow Preserving Cavitation Model, Journal of Tribology, vol.127, issue.4, pp.793-802, 2005.
DOI : 10.1115/1.2005307
URL : https://hal.archives-ouvertes.fr/hal-00008082

S. Martin, Influence of Multiscale Roughness Pattern in Cavitation Flows: Applications to Journal Bearing, Mathematics .Problems in Engineering, p.25, 2008.

J. Pullen and J. B. Williamson, On the Plastic Contact of Rough Surfaces, Proceedings of Royal Society, pp.327-159, 1972.
DOI : 10.1098/rspa.1972.0038

A. O. Lebeck, A Mixed Friction Hydrostatic Mechanical Face Seal Model with phase Chang, ASLE Transactions, vol.102, pp.133-138, 1980.

I. Etsion and I. Front, A Model for Static Sealing Performance of End Face Seals, Tribology Transactions, vol.23, issue.1, pp.111-119, 1994.
DOI : 10.1243/PIME_PROC_1970_185_069_02

B. Ruan, R. F. Salant, and I. Green, A Mixed Lubrication Model of Liquid/Gas Mechanical Face Seals, Tribology Transactions, vol.23, issue.4, pp.647-657, 1997.
DOI : 10.1080/10402009408983273

A. O. Lebeck, Mixed lubrication in mechanical face seals with plain faces, Proceedings of the Institution of Mechanical Engineers, pp.163-175, 1999.
DOI : 10.1243/1350650991542910

S. R. Harp and R. F. Salant, Inter-asperity cavitation and global cavitation in seals:, Tribology International, vol.35, issue.2, pp.113-121, 2002.
DOI : 10.1016/S0301-679X(01)00103-7

I. Green, A Transient Dynamic Analysis of Mechanical Seals Including Asperity Contact and Face Deformation, Tribology Transactions, vol.23, issue.3, pp.284-293, 2002.
DOI : 10.1115/1.555332

C. Minet, N. Brunetière, and B. Tournerie, A Deterministic Mixed Lubrication Model for Mechanical Seals, Journal of Tribology, vol.133, issue.4, pp.42203-42214, 2011.
DOI : 10.1115/1.4005068

T. Y. Hou and X. H. Wu, A Multiscale Finite Element Method for Elliptic Problems in Composite Materials and Porous Media, Journal of Computational Physics, vol.134, issue.1, pp.169-189, 1997.
DOI : 10.1006/jcph.1997.5682

T. Y. Hou, X. H. Wu, and Z. Cai, Convergence of a multiscale finite element method for elliptic problems with rapidly oscillating coefficients, Mathematics of Computation, vol.68, issue.227, pp.913-943, 1999.
DOI : 10.1090/S0025-5718-99-01077-7

Y. R. Efendiev, T. Y. Hou, and X. H. Wu, Convergence of a Nonconforming Multiscale Finite Element Method, SIAM Journal on Numerical Analysis, vol.37, issue.3, pp.888-910, 2000.
DOI : 10.1137/S0036142997330329

Z. Chen and T. Y. Hou, A mixed multiscale finite element method for elliptic problems with oscillating coefficients, Mathematics of Computation, vol.72, issue.242, pp.541-576, 2002.
DOI : 10.1090/S0025-5718-02-01441-2

S. L. Arbogast and A. Bryant, A Two-Scale Numerical Subgrid Technique for Waterflood Simulations, SPE Journal, vol.7, issue.04, pp.446-457, 2002.
DOI : 10.2118/81909-PA

Y. R. Efendiev and T. Y. Hou, Multiscale finite element methods for porous media flows and their applications, Applied Numerical Mathematics, vol.57, issue.5-7, pp.5-7, 2006.
DOI : 10.1016/j.apnum.2006.07.009

S. Jiang and Y. Huang, Numerical Investigation on the Boundary Conditions for the Multiscale Base Functions, Communication in Computational Physics, vol.5, issue.5, pp.928-941, 2009.

P. Jenny, S. H. Lee, and H. A. Tchelepi, Multi-scale finite-volume method for elliptic problems in subsurface flow simulation, Journal of Computational Physics, vol.187, issue.1, pp.47-67, 2003.
DOI : 10.1016/S0021-9991(03)00075-5

I. Lunati and P. Jenny, Multiscale finite-volume method for compressible multiphase flow in porous media, Journal of Computational Physics, vol.216, issue.2, pp.616-636, 2006.
DOI : 10.1016/j.jcp.2006.01.001

B. Dhia, H. Rateau, and G. , The Arlequin method as a flexible engineering design tool, International Journal for Numerical Methods in Engineering, vol.193, issue.11, pp.1442-1462, 2005.
DOI : 10.1002/nme.1229
URL : https://hal.archives-ouvertes.fr/hal-00018915

J. Touzeau, V. Chiaruttini, F. Feyel, and D. Ben, Approche Multi-échelles Arlequin pour l'Etude des Structures Composites Stratifiées, CSMA 2011 10ème Colloque National en Calcul des Structures 9-13 Mai 2011, Presqu'île de Giens (Var)

G. Rateau, Méthode Arlequin pour les Problèmes Mécaniques Multi-échelles, Thèse de doctorat, 2003.

R. P. Federenko, A Relaxation method for solving elliptic, U.S.S.R. Computation Mathematics and Physics, 1962.

A. Brandt, Multi-level adaptive solutions to boundary-value problems, Mathematics of Computation, vol.31, issue.138, pp.333-390, 1977.
DOI : 10.1090/S0025-5718-1977-0431719-X

C. H. Venner and A. A. Lubrecht, Multilevel Methods in Lubrication, Tribology series, vol.37, p.400, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00663246

D. F. Denny, Some measurements of fluid pressures between plane parallel thrust surfaces with special reference to radial-face seals, Wear, vol.4, issue.1, pp.64-83, 1961.
DOI : 10.1016/0043-1648(61)90242-3

F. K. Orcutt, An Investigation of the Operation and Failure of Mechanical Face Seals, Journal of Lubrication Technology, vol.91, issue.4, pp.713-725, 1969.
DOI : 10.1115/1.3555029

B. N. Banerjee and R. A. Burton, Experimental Studies on Thermoelastic Effects in Hydrodynamically Lubricated Face Seals, Journal of Lubrication Technology, vol.101, issue.3, pp.257-282, 1979.
DOI : 10.1115/1.3453349

B. Tournerie, D. Reungoat, and J. Frêne, Temperature Measurements by Infrared Thermography in the Interface of a Radial Face Seal, Journal of Tribology, vol.113, issue.3, pp.571-576, 1991.
DOI : 10.1115/1.2920661

D. Reungoat and B. Tournerie, Application de la Thermographie Infrarouge à l'Etude d'un Contact Annulaire Lubrifié, pp.31-32, 1991.

N. Brunetiere, Etude Théorique et Expérimentale du Comportement Thermo-élastohydrodynamique des Garnitures d'Etanchéité, Thèse de Doctorat, 2001.

F. Migout, Etude Théorique et Expérimentale du Changement de Phase dans un Contact de Garniture Mécanique d'Etanchéité, Thèse de Doctorat, 2010.

G. Knoll, H. Peeken, and H. Hoft, Thermohydrodynamic Calculation of End Face Seals, Proceeding of 14 th International Conference on Fluid Sealing, BHRG, 1994.

V. Person and B. Tournerie, THD Aspects in Misaligned Wavy Face Seals, Proceeding of 15 th International Conference on Fluid Sealing, BHRG, pp.505-519, 1997.

J. C. Danos, B. Tournerie, and J. Frêne, Notched Rotor Face Effects on Thermohydrodynamic Lubrication in Mechanical Face Seal, Science Direct, Tribology series, vol.38, pp.251-259, 2000.
DOI : 10.1016/S0167-8922(00)80130-3

J. C. Danos, B. Tournerie, and J. Frêne, THD lubrication of mechanical face seals during transient period after start-up: 2D modelisation, pp.477-488, 2003.
DOI : 10.1016/S0167-8922(03)80162-1

B. Tournerie, J. C. Danos, and J. Frêne, Three-Dimensional Modeling of THD Lubrication in Face Seals, Journal of Tribology, vol.123, issue.1, pp.196-204, 2001.
DOI : 10.1115/1.1327584

N. Brunetière, B. Tournerie, and J. Frêne, TEHD Lubrication of Mechanical Face Seals in Stable Tracking Mode: Part 1???Numerical Model and Experiments, Journal of Tribology, vol.125, issue.3, pp.608-616, 2003.
DOI : 10.1115/1.1510885

B. Tournerie, N. Brunetiere, and J. C. Danos, 2D Numerical Modeling of the TEHD Transient Behavior of Mechanical Face Seals, Proceeding of 17 th International Conference on Fluid Sealing, pp.43-57, 2003.

B. Tournerie, N. Brunetiere, and T. Cicone, Lubrification thermo élasto hydrodynamique des garnitures mécaniques d'étanchéité en régime transitoire de démarrage; comparaison des modélisations 1D et 2D, Journées francophones de Tribologie, pp.11-13, 2005.

R. F. Salant and B. Cao, Unsteady Analysis of a Mechanical Seal Using Duhamel???s Method, Journal of Tribology, vol.127, issue.3, pp.623-631, 2005.
DOI : 10.1115/1.1924427

N. Brunetière, B. Tournerie, and J. Frêne, TEHD Lubrication of Mechanical Face Seals in Stable Tracking Mode: Part 2???Parametric Study, Journal of Tribology, vol.125, issue.3, pp.617-627, 2003.
DOI : 10.1115/1.1510886

N. Brunetière, B. Tournerie, and J. Frêne, A Simple and Easy-To-Use TEHD Model for Non-Contacting Liquid Face Seals, Tribology Transactions, vol.29, issue.2, pp.187-192, 2003.
DOI : 10.1115/1.2920661

S. Thomas, Modélisation Numérique du Comportement Thermo-Aéro-Dynamique des Garnitures d'Etanchéité pour Gaz Réels Hautes Pressions, Thèse de doctorat, 2001.

N. Brunetière, E. Galenne, B. Tournerie, and I. Pierre-danos, Modelling of non-laminar phenomena in high reliability hydrostatic seals operating in extreme conditions, Tribology International, vol.41, issue.4, pp.211-220, 2008.
DOI : 10.1016/j.triboint.2007.07.002

L. Chang and C. Farnum, A Thermal Model for Elastohydrodynamic Lubrication of Rough Surfaces, Tribology Transactions, vol.113, issue.2, pp.281-286, 1992.
DOI : 10.1080/10402009208982119

L. Qiu and H. S. Cheng, Temperature Rise Simulation of Three-Dimensional Rough Surfaces in Mixed Lubricated Contact, Journal of Tribology, vol.120, issue.2, pp.310-317, 1998.
DOI : 10.1115/1.2834427

J. Frêne, D. Nicolas, B. Degueurce, D. Berthe, and M. Godet, Lubrification Hydrodynamique ? Paliers et Butées, 1990.

T. Cicone, Studiul Problemelor Thermohidrodinamice ale Etansarilor Frontale cu Frecare Fluida, Thèse de doctorat, 1997.

F. Tachibana, S. Fukui, and H. Mitsamura, Heat Transfer in an Annulus with an Inner Rotating Cylinder, Bulletin of JSME, vol.3, issue.9, pp.119-122, 1960.
DOI : 10.1299/jsme1958.3.119

K. M. Beker, Measurements of convective heat transfer from a horizontal cylinder rotating in a tank of water, International Journal of Heat and Mass Transfer, vol.6, issue.12, pp.1053-1062, 1963.
DOI : 10.1016/0017-9310(63)90006-1

C. Li, Thermal Deformation in a Mechanical Face Seal, A S L E Transactions, vol.19, issue.2, pp.146-152, 1976.
DOI : 10.1080/05698197608982788

J. C. Doane, M. T. Beard, and J. E. , An experimental-computational investigation of the heat transfer in mechanical face seals, International Journal of Heat and Mass Transfer, vol.34, issue.4-5, pp.1027-1041, 1991.
DOI : 10.1016/0017-9310(91)90014-6

R. L. Phillips, J. L. Merati, and P. , Experimental Determination of the Thermal Characteristics of a Mechanical Seal and Its Operating Environment, Tribology Transactions, vol.283, issue.4, pp.559-568, 1997.
DOI : 10.1115/1.2817504

P. Merati, R. L. Phillips, and J. L. , Experimental and Computational Investigation of Flow and Thermal Behavior of a Mechanical Seal, Tribology Transactions, vol.3, issue.4, pp.731-738, 1999.
DOI : 10.1080/10402009708983693

A. O. Lebeck, M. E. Nygrena, S. A. Shirazi, and R. Soulisab, Fluid Temperature and Film Coefficient Prediction and Measurement in Mechanical Face Seals???Experimental Results, Tribology Transactions, vol.40, issue.4, pp.411-422, 1998.
DOI : 10.1115/1.3256365

S. Shirazi, R. Soulisab, A. O. Lebeck, and M. E. Nygrena, Fluid Temperature and Film Coefficient Prediction and Measurement in Mechanical Face Seals???-Numerical Results, Tribology Transactions, vol.10, issue.4, pp.459-470, 1998.
DOI : 10.1115/1.3446944

N. Brunetière and B. Molodo, Heat transfer in a mechanical face seal, International Journal of Thermal Sciences, vol.48, issue.4, pp.781-794, 2009.
DOI : 10.1016/j.ijthermalsci.2008.05.014

T. G. Doust and A. Parmar, An Experimental and Theoretical Study of Pressure and Thermal Distortions in a Mechanical Seal, A S L E Transactions, vol.3, issue.2, pp.151-159, 1986.
DOI : 10.1243/03093247V184199

A. O. Lebeck, The effect of ring deflection and heat transfer on the thermoelastic instability of rotating face seals, Wear, vol.59, issue.1, pp.121-133, 1980.
DOI : 10.1016/0043-1648(80)90274-4

I. Etsion, Performance of End-Face Seals with Diametral Tilt and Coning???Hydrostatic Effects, A S L E Transactions, vol.21, issue.2, pp.279-288, 1980.
DOI : 10.1080/05698198008982970

I. Green and I. Etsion, Stability Threshold and Steady-State Response of Noncontacting Coned-Face Seals, A S L E Transactions, vol.105, issue.2, pp.449-460, 1985.
DOI : 10.1080/05698198508981642

T. G. Doust and A. Parmar, Transient Thermohydrodynamic Effects in a Mechanical Face Seal, Proceeding of 11 th International Conference on Fluid Sealing

L. Van and G. , Mechanical Seals with Laser Machined Wavy for high Duty Boiler Circulation and Feedwater Applications, Proceeding of 4 th Conference of EDF- LMS Workshop, 2005.

A. Djamai, N. Brunetière, and B. Tournerie, Numerical Modeling of Thermohydrodynamic Mechanical Face Seals, Tribology Transactions, vol.10, issue.3, pp.414-425, 2010.
DOI : 10.1016/0017-9310(63)90006-1

N. Patir, A numerical procedure for random generation of rough surfaces, Wear, vol.47, issue.2, pp.263-277, 1978.
DOI : 10.1016/0043-1648(78)90157-6

V. Bakolas, Numerical generation of arbitrarily oriented non-Gaussian three-dimensional rough surfaces, Wear, vol.254, issue.5-6, pp.546-554, 2003.
DOI : 10.1016/S0043-1648(03)00133-9

W. Watson and T. A. Spedding, The time series modelling of non-gaussian engineering processes, Wear, vol.83, issue.2, pp.215-231, 1982.
DOI : 10.1016/0043-1648(82)90178-8

N. L. Johnson, SYSTEMS OF FREQUENCY CURVES GENERATED BY METHODS OF TRANSLATION, Biometrika, vol.36, issue.1-2, pp.149-176, 1949.
DOI : 10.1093/biomet/36.1-2.149

I. D. Hill, R. Hill, and R. L. Holder, Algorithm AS 99: Fitting Johnson Curves by Moments, Applied Statistics, vol.25, issue.2, pp.180-189, 1976.
DOI : 10.2307/2346692

H. G. Elrod, A Cavitation Algorithm, Journal of Lubrication Technology, vol.103, issue.3, pp.350-354, 1981.
DOI : 10.1115/1.3251669

D. Bonneau and M. Hajjam, Mod??lisation de la rupture et de la reformation des films lubrifiants dans les contacts ??lastohydrodynamiques, Revue Europ??enne des ??l??ments Finis, vol.122, issue.2, pp.679-704, 2002.
DOI : 10.1080/12506559.2001.9737566

B. J. Hamrock and D. Dowson, Ball Bearing Lubrication, 1981.

T. A. Harris, Rolling Bearing Analysis, 1966.
DOI : 10.1115/1.3617048

G. S. Buck, Heat Transfer in Mechanical Seals, Proceeding of 6 th International Pump User Symposium, 1989.

A. Vezjak and J. Vizintin, Experimental Study on the Relationship between Lubrication Regime and the Performance of Mechanical Seals, Lubrication Engineering, vol.57, pp.17-22, 2001.

N. Brunetière, An analytical approach of the thermoelastohydrodynamic behaviour of mechanical face seals operating in mixed lubrication, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.6, issue.12, pp.1221-1233, 2010.
DOI : 10.1243/13506501JET831

N. Brunetière, B. Tournerie, and C. Minet, On the Roughness Induced Hydrodynamic Pressure in Mechanical Face Seals, Proceeding of the 21 st International Conference on Fluid Sealing, BHRG, pp.103-113, 2011.

N. Brunetière and J. Wang, Large-Scale Simulation of Fluid Flows in Mixed Lubrication, ASME/STLE 2011 Joint Tribology Conference, 2011.
DOI : 10.1115/IJTC2011-61023