[. S. Bibliographie, V. Anandan, and . Ramalingam, Thermal management of electronics : a review of literature, ANC2010] : Documentation technique AnCeram GmbH, pp.5-26, 2008.

V. Allard, L. M. Bley, and . Bouvard, Conditionnement des modules de puissance Métallurgie des poudres, Hermes sciences, 2002.

:. C. Buttay, Modules et boîtiers de puissance (packaging), Techniques de l'Ingénieur, p.3116, 2010.

:. M. Ciappa, Selected failure mechanisms of modern power modules". Microelectronics reliability, pp.653-667, 2002.

:. L. Dupont, Contribution à l'étude de la durée de vie des assemblages de puissance dans des environnements haute température et avec des cycles thermiques de grande amplitude, Thèse de doctorat de l'Ecole Normale Supérieure de Cachan, 2006.

:. J. Leclercq, Electronique de puissance -Eléments de technologie, Techniques de l'Ingénieur, p.3220, 1994.

:. H. Jiang, K. Moon, and C. P. Wong, Tin/Silver/Copper alloy nanoparticle pastes for low temperature Lead-free interconnect applications, IEEE Electronic Components and technology conference, pp.1400-1404, 2008.

:. S. Joseph and G. J. Phatak, Effect of surfactant on the bath stability and electrodeposition of Sn???Ag???Cu films, Surface and Coatings Technology, vol.202, issue.13, pp.3023-3028, 2008.
DOI : 10.1016/j.surfcoat.2007.11.002

:. T. Joyeux, J. Jarrige, J. C. Labbe, and J. P. Lecompte, Amélioration de la dissipation thermique dans les assemblages Cu/AlN, Matériaux, 2002.

:. S. Mandal, V. Rao, A. K. Rayag-cu-ti-ménager, B. Allard, V. Bley-naka et al., Crack mechanism in wire bonding joints Extrait du fascicule de cours de Master deuxième année intitulé "les matériaux composites", enseignement de l'université de Bordeaux 1 pour la section Chimie des granulats et des colloïdesFiabilité et analyse de défaillances de modules de puissance à IGBT Smithells metals reference bookAdvantages and new development of direct bonded copper substrates Composants de puissance en SiC-ApplicationsPhysics and materials challenges for Lead-free soldersPhysics limits and lifetime limitations of semiconductor devices at high temperatures Microelectronics reliabilityWettability of Ni-V, Co-V, and Ni-Cr6V system brazing alloys on Si 3 N 4 ceramic and interfacial reactions Materials science and engineering AMechanical reliability of Sn-rich A-Sn/Ni chip solder joints fabricated by sequential electroplating methodEffects of chromium on the interface and bond strength of metal-ceramic joints Materials chemistry and physicsPressure-assisted low-temperature sintering of silver paste as an alternative die-attach solution to solder reflowThe use of severe plastic deformation for microstructural controlEffects of reinforcement particle size in MMCs on extrusion die wearDie design optimization for axisymmetric hot extrusion of metal matrix compositesStructural studies pf submicrocrystalline copper and copper composites by different methods th Size-Strain conference "Diffraction analysis of the microstructure of materialsProcessing and microstructure of functionally graded W/Cu composites fabricated by multi-billet extrusion using mechanically alloyed powdersExtrusion of lead-free cast Copper alloy-graphite particle compositeFabrication of Aluminium/Copper clad composite using hot hydrostatic extrusion process and its material characteristicsSolid state de-wetting observed for vapor deposited copper subtratesSimulation-based analysis of composite extrusion processesNovel processing and characterization of Cu/CNF nanocomposite for high thermal conductivity applications Smithells metals reference bookCristalline structure and properties of Carbon nanofiber composites prepared by melt extrusionHot direct extrusion-A novel method to produce abrasionresistant metal-matrix compositesBulk nanostructured materials from severe plastic deformationPrinciples of equal-channel angular pressing as a processing tool for grain refinementDrains thermiques adaptatifs : cuivre allié / fibres de carboneFabrication of fiber reinforced metal matrix composites by squeeze casting technologyChallenges and advances in nanocomposite processing techniquesEffect of hot extrusion on the microstructure of a particulate reinforced Magnesium matrix compositeTheoretical analysis of extrusion of rectangular, hexagonal and octagonal composite cald rodsPure copper processed by extrusion preceded equal channel angular processionReliability studies of surface mount solder joints -Effect of Cu-Sn inetrmetallic compounds, Conditionnement des modules de puissanceRupture fragile et fatigue des substrats DBC pour applications hautes températures Techniques de l'Ingénieur Microelectronics reliability, N°48NET] : Notice de l'appareillage de mesure LFA 457 de Netzsch. [POU2004] : J.-L. Pouchou, "L'analyse EBSD. Principes et applications EDP Sciences Progress in materials science Progress in materials science Thèse de doctorat de l'Ecole Doctorale des Sciences Chimiques de Bordeaux Thèse de doctorat de l'Ecole Doctorale des Sciences Chimiques de BordeauxZIC2006] : G. A. Zickler, B. Smarsly, N. Gierlinger, H. Peterlik, O. Paris, "A reconsideration of the relationship between the crystallite size La of carbons determined by X-ray diffraction and Raman spectroscopy IEEE transactions on components, packaging, and manufacturing technology, pp.5587-5590, 1990.

S. Sn, S. Sn-cu, S. H. Chao, X. Chae, K. Zhang et al., Enhancement of the wettability and solder joint reliability at the Sn-9Zn-0.5Ag solder alloy-Cu interface by Ag precoatingInvestigation of diffusion and electromigration parameters fos Cu-Sn intermetallic compounds in Pb-free solders using simulated annealingMicrostructural characteristics of immersion tin coatings on copper circuitries in circuit boardsActivation energies of intermetallic growth of Sn-Ag eutectic solder on copper substratesInterfaces in lead-free solder alloys : enthalpy of formation of binary Ag-Sn, Cu-Sn and Ni-Sn intermetallic compoundsBrasure composite sans plomb. De la conception à la caractérisationMicrostructural evolution and mechanical properties of SnAgCu alloysSpontaneous growth mechanism of tin whiskers, Thèse de doctorat de l'Ecole Doctorale des Sciences Chimiques de Bordeaux Cu on whisker initiation from electrodeposited Sn/Cu coatingIntrinsic and interdiffusion in Cu-Sn system Journal of phase equilibria and diffusion Basic and applied researchLEE1998] : B.-Z. Lee, D. N. Lee, pp.5033-5050, 1997.

:. Y. Lee and J. G. Duh, Interfacial morphology and concentration profile in the unleaded solder/Cu joint assembly, Journal of materials science : materials in electronics, issue.10, pp.33-43, 1999.

:. J. Lee, D. Park, J. Moon, Y. Lee, D. Shin et al., Characteristics of the Sn-Pb eutectic solder bump formed via fluxless laser reflow soldering, Journal of Electronic Materials, vol.25, issue.10, pp.1153-1159, 2000.
DOI : 10.1007/s11664-000-0006-7

:. Lee and M. Chen, Influence of intermetallic compounds on the adhesive strength of solder joints, Materials science and engineering A333, pp.24-34, 2001.
DOI : 10.1016/S0921-5093(01)01820-2

:. M. Lerbs, R. Billat, C. N. Liao, C. T. Wei, A. A. Liu et al., Characterization and solderabilityof cold spray Sn-Cu coatings on Al and Cu substratesEffect on intermetallic coumpound formation on electrical properties of Cu/Sn interface during thermal treatment, Spalling of Cu 6 Sn 5 spheroids in the soldering reaction of eutectic SnPb on Cr/Cu/Au thin films, pp.1395-1404, 1996.

:. P. Madakson and J. Karasinski, implantation on the interdiffusion and resistivity of Cu/Ni/Au thin films, Journal of Applied Physics, vol.67, issue.10, pp.6189-6193, 1990.
DOI : 10.1063/1.345184

:. Moon, Observed correlation of Sn oxide film to Sn whisker growth inSn- Cu electrodeposited for Pb-free soldersThe Au-Cu (Gold- Copper) system"; Bulletin of alloys phase diagrams, Nouveau traité de chimie minérale, pp.454-474, 1951.

:. K. Suganuma, T. Murata, H. Noguchi, and Y. Toyoda, Heat Resistance of Sn???9Zn Solder/Cu Interface with or without Coating, Journal of Materials Research, vol.45, issue.04, pp.884-891, 2000.
DOI : 10.1007/BF02651363

:. Suh, C. Park, and H. Kwon, Growth kinetics of Cu-Sn intermetallic compouds at the interface of a Cu substrate and 42Sn-58Bi electrodeposits, and the influence of the intermetallic compounds on the shear resistance of solder joints, Materials chemistry and physics, issue.110, pp.95-99, 2008.

:. K. Tu, S. Wen, J. A. Omanovic, and . Szpunar, Irreversible processes of spontaneous whisker growth in bimetallic Cu-Sn thin-film reactions, EPD CongressThe Minerals, Metals and Materials Society), pp.2030-2034, 1994.
DOI : 10.1103/PhysRevB.49.2030

:. J. Winterstein and M. G. Norton, The influence of porosity on whisker growth in electroplated tin films, Journal of Materials Research, vol.21, issue.12, pp.2971-2974, 2006.
DOI : 10.1557/jmr.2006.0368

:. Y. Wu, The formation and growth of intermetallics in composite solder, Journal of Electronic Materials, vol.57, issue.7, 1993.
DOI : 10.1007/BF02817353

:. Y. Xie, Characteristic atom arranging crystallogphy of alloy phases for Au-Cu system, Science China Technological Sciences, vol.366, issue.6, pp.1560-1567, 2011.
DOI : 10.1007/s11431-011-4390-4

:. Yoon, Mechanical reliability of Sn-rich Au???Sn/Ni flip chip solder joints fabricated by sequential electroplating method, Microelectronics Reliability, vol.48, issue.11-12, pp.1857-1863, 2008.
DOI : 10.1016/j.microrel.2008.09.008

:. K. Zeng, R. Stierman, T. Chiu, and D. Edwards, Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability, Journal of Applied Physics, vol.97, issue.2, p.24508, 2005.
DOI : 10.1063/1.1839637

:. W. Zhang, A. Egli, and F. Schwager, Investigation of Sn-Cu intermetallic compounds by AFM: new aspects of the role of intermetallic compounds in whisker formation, Growth kinetics of intermetallic compounds and tensile properties of Sn-Ag-Cu/Ag single crystal joint, pp.1-410, 2005.
DOI : 10.1109/TEPM.2005.847441