X. Ai and H. S. Cheng, The Influence of Moving Dent on Point EHL Contacts, Tribology Transactions, vol.24, issue.2, pp.323-335, 1994.
DOI : 10.1115/1.3261260

X. Ai and S. C. Lee, Effect of Slide-to-Roll Ratio on Interior Stresses Around a Dent in EHL Contacts, Tribology Transactions, vol.22, issue.4, pp.881-889, 1996.
DOI : 10.1115/1.3452543

X. Ai and H. P. Nixon, Fatigue Life Reduction of Roller Bearings Due to Debris Denting: Part I ??? Theoretical Modeling, Tribology Transactions, vol.941787, issue.2, pp.197-204, 2000.
DOI : 10.1115/1.3452543

X. Ai and H. P. Nixon, Fatigue Life Reduction of Roller Bearings Due to Debris Denting: Part II - Experimental Validation, Tribology Transactions, vol.871687, issue.2, pp.311-317, 2000.
DOI : 10.1520/STP36144S

X. Ai, Effect of debris contamination on the fatigue life of roller bearings, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.1, issue.6, pp.563-575, 2001.
DOI : 10.1243/1350650011543808

E. Antaluca and D. Nelias, Contact fatigue analysis of a dented surface in a dry elastic-plastic circular point contact. Tribology Letters, pp.139-153, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00381424

?. Aström, H. Venner, and C. H. , Soap-thickener induced local pressure fluctuations in a grease-lubricated elastohydrodynamic point contact

C. Barus and . Isothermals, isopiestics and isometrics relative to viscosity, American Journal of Science, vol.1893, issue.45, pp.87-96

V. Bhargava, G. T. Hahn, and C. A. Rubin, An Elastic-Plastic Finite Element Model of Rolling Contact, Part 1: Analysis of Single Contacts, Journal of Applied Mechanics, vol.52, issue.1, pp.67-74, 1985.
DOI : 10.1115/1.3169028

V. Bhargava, G. T. Hahn, and C. A. Rubin, An Elastic-Plastic Finite Element Model of Rolling Contact, Part 2: Analysis of Repeated Contacts, Journal of Applied Mechanics, vol.52, issue.1, pp.75-82, 1985.
DOI : 10.1115/1.3169030

N. Biboulet, A. A. Lubrecht, and L. Houpert, Contact pressure in indented elastohydrodynamic lubrication contacts, Proc. IMechE, pp.415-421, 2008.
DOI : 10.1243/13506501JET324
URL : https://hal.archives-ouvertes.fr/hal-00381374

N. Biboulet, A. A. Lubrecht, and L. Houpert, Contact Pressure of Indented Wide Elliptical Contacts: Dry and Lubricated Cases, Journal of Tribology, vol.130, issue.4, 2008.
DOI : 10.1115/1.2960496
URL : https://hal.archives-ouvertes.fr/hal-00381392

J. Boussinesq, Applications des potentielsàpotentiels`potentielsà l'´ etude de l'´ equilibre et du mouvement des solidesélastiquessolidesélastiques, p.1885

A. Brandt, Multi-level adaptive solutions to boundary-value problems, Mathematics of Computation, vol.31, issue.138, pp.333-390, 1977.
DOI : 10.1090/S0025-5718-1977-0431719-X

A. Brandt, Rigorous local mode analysis of multigrid. Prelim, Proc. 4th Copper Mountain Conference of MultiGrid Methods, Copper Mountain Colorado, 1990.

A. Brandt and A. A. Lubrecht, Multilevel matrix multiplication and fast solution of integral equations, Journal of Computational Physics, vol.90, issue.2, pp.348-370, 1990.
DOI : 10.1016/0021-9991(90)90171-V

P. M. Cann, J. C. Hamer, R. S. Sayles, H. A. Spikes, and E. Ioannides, Direct observation of particle entry and deformation in a rolling EHD contact, Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, pp.127-134, 1996.
DOI : 10.1016/S0167-8922(08)70776-4

A. Chapkov, Etude des contacts elastohydrodynamiques lubrifiés avec un fluide non Newtonien, 2006.

A. Chapkov, F. Colin, and A. A. Lubrecht, Influence of Harmonic Surface Roughness on the Fatigue Life of Elastohydrodynamic Lubricated Contacts, Proc. IMechE, pp.287-294, 2006.
DOI : 10.1243/13506501JET119

W. Cheng, H. S. Cheng, and L. M. Keer, Longitudinal Crack Initiation Under Pure Rolling Contact Fatigue??, Tribology Transactions, vol.10, issue.1, pp.51-58, 1994.
DOI : 10.1115/1.3453074

W. Cheng, H. S. Cheng, T. Mura, and L. M. Keer, Micromechanics Modeling of Crack Initiation Under Contact Fatigue, Journal of Tribology, vol.116, issue.1, pp.2-8, 1994.
DOI : 10.1115/1.2927042

F. Chevalier, Modélisation des conditions d'alimentation dans les contacts EHD ponctuels, 1996.

J. D. Cogdell, Timken internal report Timken company metrology laboratory [24] Coulon S. Prédiction de la durée de vie des contacts ponctuels lubrifiés en présence d'indentations, 2001.

S. Coulon, F. Ville, and A. A. Lubrecht, An abacus for predicting the rolling contact fatigue life reduction due to debris dents, Proceedings of the 28th Leeds-Lyon Symposium on Tribology, pp.283-294, 2002.
DOI : 10.1016/S0167-8922(02)80032-3
URL : https://hal.archives-ouvertes.fr/hal-00507970

S. Coulon, F. Ville, and A. A. Lubrecht, Effect of a Dent on the Pressure Distribution in Dry Point Contacts, Journal of Tribology, vol.124, issue.1, pp.220-222, 2002.
DOI : 10.1115/1.1396345
URL : https://hal.archives-ouvertes.fr/hal-00454932

S. Coulon, I. Jubault, A. A. Lubrecht, F. Ville, and P. Vergne, Pressure profiles measured within lubricated contacts in presence of dented surfaces. Comparison with numerical models, Tribology International, vol.37, issue.2, pp.111-117, 2004.
DOI : 10.1016/S0301-679X(03)00041-0
URL : https://hal.archives-ouvertes.fr/hal-00508025

B. Damiens, Modélisation de la lubrification sous-alimentée dans les contacts elastohydrodynamiques elliptiques, 2003.

D. Van, K. , L. Douaron, A. Lieurade, and H. P. , MULTIAXIAL FATIGUE LIMIT: A NEW APPROACH, pp.1879-1885, 1984.
DOI : 10.1016/B978-1-4832-8440-8.50185-X

H. Desimone, A. Bernasconi, and S. Beretta, On the application of Dang Van criterion to rolling contact fatigue, Wear, vol.260, issue.4-5, pp.567-572, 2005.
DOI : 10.1016/j.wear.2005.03.007

Y. Diab, S. Coulon, F. Ville, and L. Flamand, Experimental investigations on rolling contact fatigue of dented surfaces using artificial defects: subsurface analyses, Proceedings of the 29th Leeds-Lyon Symposium on Tribology, pp.359-366, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00508026

D. Dowson and G. R. Higginson, A numerical solution to the elastohydrodynamic problem, Proc. IMechE, part C, pp.6-15, 1959.

D. Dowson and G. R. Higginson, Elastohydrodynamic lubrication, the fundamentals of roller and gear lubrication, 1966.

G. Dudragne and D. Girodin, Application au dimensionnement des roulements d'un nouveau modèle de calcul de la durée de vie, Actes JIFT 1999 ? Roulements et tribologie ? AFM/GST Tribologie, pp.149-160, 1999.

R. S. Dwyer-joyce, J. C. Hamer, R. S. Sayles, and E. Ioannides, Surface damage effects caused by debris in rolling bearing lubricants, with emphasis on friable materials. Rolling element bearings ? towards the 21st century, pp.1-8, 1990.

R. S. Dwyer-joyce, The effect of lubricant contamination on rolling bearing performance, 1992.

R. S. Dwyer-joyce and J. Heymer, The Entrainment of Solid Particles into Rolling Elastohydrodynamic Contacts, Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, pp.135-140, 1996.
DOI : 10.1016/S0167-8922(08)70777-6

A. M. Ertel, Hydrodynamic lubrication based on new principles, Akad. Nauk SSSR Prikadnaya Mathematica i Mekhanika, vol.3, pp.41-52, 1939.

R. T. Fenner, Engineering elasticity application of numerical and analytical techniques, Ellis Horwood Ltd, 1986.

C. A. Foord, W. C. Hamman, and A. Cameron, Evaluation of Lubricants Using Optical Elastohydrodynamics, A S L E Transactions, vol.9, issue.1, pp.31-43, 1968.
DOI : 10.1122/1.548943

D. Girodin, F. Ville, R. Guers, and G. Dudragne, Experimental investigation of surface initiated rolling contact fatigue using dented surfaces, Proceedings of the 27th Leeds-Lyon Symposium on Tribology, pp.449-458, 2001.
DOI : 10.1016/S0167-8922(01)80129-2
URL : https://hal.archives-ouvertes.fr/hal-00508116

D. Girodin, F. Ville, R. Guers, and G. Dudragne, Rolling Contact Fatigue Tests to Investigate Surface Initiated Damage and Tolerance to Surface Dents, ASTM, pp.263-282, 2002.
DOI : 10.1520/STP10859S

R. Gohar and A. Cameron, The Mapping of Elastohydrodynamic Contacts, A S L E Transactions, vol.8, issue.3, pp.215-225, 1967.
DOI : 10.1038/200458b0

J. A. Greenwood and G. E. Morales-espejel, The Behaviour of Transverse Roughness in EHL Contacts, Proc. IMechE, pp.121-132, 1994.
DOI : 10.1243/PIME_PROC_1994_208_359_02

J. A. Greenwood and G. E. Morales-espejel, The Behaviour of Transverse Roughness in EHL Contacts, Proceedings of the 23rd Leeds- Lyon Symposium on Tribology, pp.307-312, 1997.
DOI : 10.1243/PIME_PROC_1994_208_359_02

V. Gupta, P. Bastias, G. T. Hahn, and C. A. Rubin, Influence of Indent Geometry on Repeated Two-Dimensional Rolling Contact, Journal of Tribology, vol.117, issue.4, pp.655-659, 1995.
DOI : 10.1115/1.2831531

G. T. Hahn, V. Bhargava, C. A. Rubin, and Q. Chen, Analysis of the Rolling Contact Residual Stresses and Cyclic Plastic Deformation of SAE 52100 Steel Ball Bearings, Journal of Tribology, vol.109, issue.4, pp.618-626, 1987.
DOI : 10.1115/1.3261521

J. C. Hamer, A. A. Lubrecht, E. Ioannides, and R. S. Sayles, Surface damage on rolling elements and its subsequent effects on performance and life, Proceedings of the 15th Leeds-Lyon Symposium on Tribology, pp.189-197, 1989.
DOI : 10.1016/S0167-8922(08)70194-9

B. J. Hamrock and D. Dowson, Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1???Theoretical Formulation, Journal of Lubrication Technology, vol.98, issue.2, pp.223-229, 1976.
DOI : 10.1115/1.3452801

B. J. Hamrock and D. Dowson, Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II???Ellipticity Parameter Results, Journal of Lubrication Technology, vol.98, issue.3, pp.375-383, 1976.
DOI : 10.1115/1.3452861

B. J. Hamrock and D. Dowson, Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III???Fully Flooded Results, Journal of Lubrication Technology, vol.99, issue.2, pp.264-276, 1977.
DOI : 10.1115/1.3453074

B. J. Hamrock and D. Brewe, Simplified Solution for Stresses and Deformations, Journal of Lubrication Technology, vol.105, issue.2, pp.171-177, 1983.
DOI : 10.1115/1.3254558

H. Hertz, On the contact of elastic solids, J. Reine und Angew. Math, vol.92, pp.292-302, 1881.

C. J. Hooke, Surface roughness modification in elasto-hydrodynamic line contacts operating in the elastic piezoviscous regime, Proc. IMechE, pp.145-162, 1998.

C. J. Hooke, Surface roughness modification in elasto-hydrodynamic line contacts -the effects of roughness wavelength, orientation and operating conditions, Proceedings of the 25th Leeds-Lyon Symposium on Tribology, pp.193-202, 1999.

C. J. Hooke and C. H. Venner, Surface roughness attenuation in line and point contacts, Proc. IMechE, pp.439-444, 2000.
DOI : 10.1243/1350650001543313

C. J. Hooke and K. Y. Li, An Inverse Approach to the Validation of Pressure Predictions in Rough Elastohydrodynamic Contacts, Journal of Tribology, vol.124, issue.1, pp.103-108, 2002.
DOI : 10.1115/1.1398287

C. J. Hooke and K. Y. Li, Rapid Calculation of the Pressures and Clearances in Rough, Elastohydrodynamically Lubricated Contacts Under Pure Rolling. Part 1: Low Amplitude, Sinusoidal Roughness, Proc. IMechE, part C, pp.901-913, 2006.
DOI : 10.1243/09544062C03405

C. J. Hooke and K. Y. Li, Rapid Calculation of the Pressures and Clearances in Rough, Elastohydrodynamically Lubricated Contacts Under Pure Rolling. Part 2: General Roughness, Proc. IMechE, part C, pp.915-925, 2006.
DOI : 10.1243/09544062C03505

C. J. Hooke and K. Y. Li, Validation of the Stress Predictions in Rolling EHL Contacts Having In-Line Roughness Using the Inverse Method, Journal of Tribology, vol.128, issue.4, pp.745-752, 2006.
DOI : 10.1115/1.2345396

C. J. Hooke, K. Y. Li, and G. E. Morales-espejel, Rapid calculation of the pressures and clearances in rough, rolling-sliding elastohydrodynamically lubricated contacts. Part 1: low-amplitude, sinusoidal roughness, Proc. IMechE, part C, pp.535-550, 2007.
DOI : 10.1243/0954406JMES519

C. J. Hooke, K. Y. Li, and G. E. Morales-espejel, Rapid calculation of the pressures and clearances in rough, rolling-sliding elastohydrodynamically lubricated contacts. Part 2: general, non-sinusoidal roughness, Proc. IMechE, part C, pp.551-564, 2007.
DOI : 10.1243/0954406JMES520

M. B. Howell, C. A. Rubin, and G. T. Hahn, The Effect of Dent Size on the Pressure Distribution and Failure Location in Dry Point Frictionless Rolling Contacts, Journal of Tribology, vol.126, issue.3, pp.413-421, 2004.
DOI : 10.1115/1.1692053

E. Ioannides and T. A. Harris, A New Fatigue Life Model for Rolling Bearings, Journal of Tribology, vol.107, issue.3, pp.367-378, 1985.
DOI : 10.1115/1.3261081

C. Jacq, Limite d'endurance et durée de vie en fatigue de roulement du 32CrMoV13 nitruré en présence d'indentations, 2001.

C. Jacq, D. Nelias, G. Lormand, and D. Girodin, Development of a Three-Dimensional Semi-Analytical Elastic-Plastic Contact Code, Journal of Tribology, vol.124, issue.4, pp.653-667, 2002.
DOI : 10.1115/1.1467920
URL : https://hal.archives-ouvertes.fr/hal-00454903

G. J. Johnston, R. Wayte, and H. A. Spikes, The Measurement and Study of Very Thin Lubricant Films in Concentrated Contacts, Tribology Transactions, vol.27, issue.2, pp.187-194, 1991.
DOI : 10.1021/j100399a047

J. J. Kalker, Numerical calculation of the elastic field in a half-space, Communications in Applied Numerical Methods, vol.5, issue.4, pp.401-410, 1986.
DOI : 10.1002/cnm.1630020412

M. Kaneta, H. Yatsuzuka, and Y. Murakami, Mechanism of Crack Growth in Lubricated Rolling/Sliding Contact, A S L E Transactions, vol.103, issue.2, pp.407-414, 1985.
DOI : 10.1080/05698198508981637

M. Kaneta, T. Sakai, and H. Nishakawa, Optical Interferometric Observations of the Effects of a Bump on Point Contact EHL, Journal of Tribology, vol.114, issue.4, pp.779-784, 1992.
DOI : 10.1115/1.2920948

M. Kaneta, T. Kanada, and H. Nishakawa, Optical Interferometric Observations of the Effects of a Moving Dent on Point Contact EHL, Proceedings of the 23rd Leeds-Lyon Symposium on Tribology, pp.69-79, 1997.
DOI : 10.1016/S0167-8922(08)70437-1

Y. S. Kang, F. Sadeghi, and M. R. Hoeprich, A Finite Element Model for Spherical Debris Denting in Heavily Loaded Contacts, Journal of Tribology, vol.126, issue.1, pp.71-79, 2004.
DOI : 10.1115/1.1609483

C. N. Ko and E. Ioannides, Debris denting-The associated residual stresses and their effect on the fatigue life of rolling bearing: An FEM analysis, Proceedings of the 15th Leeds-Lyon Symposium on Tribology, pp.199-207, 1989.
DOI : 10.1016/S0167-8922(08)70195-0

M. N. Kotzalas and H. T. , Fatigue Failure Progression in Ball Bearings, Journal of Tribology, vol.123, issue.2, pp.238-242, 2001.
DOI : 10.1115/1.1308013

K. Y. Li and C. J. Hooke, Use of the Inverse Approach to Investigate the Stresses in Rough Elastohydrodynamic Contacts, Journal of Tribology, vol.124, issue.1, pp.109-113, 2002.
DOI : 10.1115/1.1398288

S. H. Loewenthal, D. W. Moyer, and W. M. Needelman, Effects of Ultra-Clean and Centrifugal Filtration on Rolling-Element Bearing Life, Journal of Lubrication Technology, vol.104, issue.3, pp.283-292, 1982.
DOI : 10.1115/1.3253194

H. K. Lorösch, Research on longer life for rolling-element bearings, ASLE Lubrication Engineering, vol.41, pp.37-43, 1985.

A. A. Lubrecht, T. Napel, W. E. Bosma, and R. , Multigrid, An Alternative Method for Calculating Film Thickness and Pressure Profiles in Elastohydrodynamically Lubricated Line Contacts, Journal of Tribology, vol.108, issue.4, pp.551-556, 1986.
DOI : 10.1115/1.3261260

A. A. Lubrecht, Numerical solution of the EHL line and point contact problem using multigrid techniques The Netherlands, 1987.

A. A. Lubrecht, T. Napel, W. E. Bosma, and R. Multigrid, Multigrid, an Alternative Method of Solution for Two-Dimensional Elastohydrodynamically Lubricated Point Contact Calculations, Journal of Tribology, vol.109, issue.3, pp.437-443, 1987.
DOI : 10.1115/1.3261467

A. A. Lubrecht, B. O. Jacobson, E. Ioannides, and . Lundberg-palmgren-revisited, Rolling element bearings ? towards the 21st century, pp.17-20, 1990.

A. A. Lubrecht, C. H. Venner, S. Lane, B. O. Jacobson, and E. Ioannides, Surface damage -Comparison of theoretical and experimental endurance lives of rolling bearings, Proceedings of the Japan International Tribology Conference, pp.185-190, 1990.

A. A. Lubrecht and E. Ioannides, A Fast Solution of the Dry Contact Problem and the Associated Sub-Surface Stress Field, Using Multilevel Techniques, Journal of Tribology, vol.113, issue.1, pp.128-133, 1991.
DOI : 10.1115/1.2920577

A. A. Lubrecht, R. S. Dwyer-joyce, and E. Ioannides, Analysis of the influence of indentations on contact life, Proceedings of the 19th Leeds-Lyon Symposium on Tribology, pp.173-181, 1993.

A. A. Lubrecht and C. H. Venner, Elastohydrodynamic lubrication of rough surfaces, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.106, issue.5, pp.397-404, 1999.
DOI : 10.1243/1350650991542767

G. Lundberg and A. Palmgren, Dynamic capacity of rolling bearings . Acta Polytech, Mech. Eng, vol.7, pp.207-213, 1947.

H. Moes, Lubrication and beyond. technical report, code 115531, 2000.

G. E. Morales-espejel, C. H. Venner, and J. A. Greenwood, Kinematics of transverse real roughness in elastohydrodynamically lubricated line contacts using Fourier analysis, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.5, issue.6, pp.523-534, 2000.
DOI : 10.1243/1350650001543395

L. Mourier, D. Mazuyer, A. A. Lubrecht, and C. Donnet, Transient increase of film thickness in micro-textured EHL contacts, Tribology International, vol.39, issue.12, pp.1745-1756, 2006.
DOI : 10.1016/j.triboint.2006.02.037
URL : https://hal.archives-ouvertes.fr/hal-00507270

D. Nelias and F. Ville, Detrimental Effects of Debris Dents on Rolling Contact Fatigue, Journal of Tribology, vol.122, issue.1, pp.55-64, 2000.
DOI : 10.1115/1.555329

D. Nelias, New Methodology to Evaluate the Rolling Contact Fatigue Performance of Bearing Steels With Surface Dents: Application to 32CrMoV13 (Nitrided) and M50 Steels, Journal of Tribology, vol.127, issue.3, pp.611-622, 2005.
DOI : 10.1115/1.1924462
URL : https://hal.archives-ouvertes.fr/hal-00368430

H. P. Nixon and H. Zantopoulos, Fatigue life performance comparisons of tapered roller bearings with debris-damaged raceways, STLE Lubrication Engineering, vol.51, pp.732-736, 1995.

J. O. Ostensen, R. Larrson, and C. H. Venner, Determination of viscosity and pressure in an elastohydrodynamic rolling contact by using optical interferometry: a theoretical study, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1994-1996 (vols 208-210), vol.210, issue.410, pp.259-268, 1996.
DOI : 10.1243/PIME_PROC_1996_210_507_02

I. Papadopoulos, Fatigue polycyclique des métaux : une nouvelle approche, 1986.

A. I. Petrusevich, Fundamental conclusion from hydrodynamic contact theory of lubrication, Isz. Akad. Nauk SSSR, 1951.

D. Piot, G. Lormand, A. Vincent, G. Baudry, D. Girodin et al., Modélisation microstructurale et micromécanique de la distribution des durées de vie en fatigue de roulement, pp.211-223, 1995.

O. Reynolds, On the theory of lubrication and its application to Mr Beauchamp tower's experiments, including an experimental determination of the viscosity of olive oil, Phil. Trans. Roy. Soc. of London, vol.117, pp.157-234, 1886.

C. J. Roelands, Correlation aspects of the viscosity-temperaturepressure relationship of lubricating oils, 1966.

A. Sackfields and D. A. Hills, Some useful results in the classical Hertz contact problem, The Journal of Strain Analysis for Engineering Design, vol.18, issue.2, pp.101-106, 1983.
DOI : 10.1243/03093247V182101

A. Sackfields and D. A. Hills, Some useful results in the tangentially loaded hertzian contact problem, The Journal of Strain Analysis for Engineering Design, vol.18, issue.2, pp.107-110, 1983.
DOI : 10.1243/03093247V182107

R. S. Sayles and P. B. Macpherson, Influence of Wear Debris on Rolling Contact Fatigue, ASTM, vol.771, pp.255-274, 1982.
DOI : 10.1520/STP36144S

R. S. Sayles and E. Ioannides, Debris Damage in Rolling Bearings and Its Effects on Fatigue Life, Journal of Tribology, vol.110, issue.1, pp.26-31, 1988.
DOI : 10.1115/1.3261569

J. O. Smith and C. K. Liu, Stresses due to tangential and normal loads on an elastic solid with application to some contact stress problems, ASME Journal of Applied Mechanics, pp.157-166, 1953.

T. E. Tallian, A datta-fitted rolling bearing life prediction model ? Part 1: Mathematical model, Tribology International, vol.39, pp.249-258, 1996.

T. E. Tallian, A datta-fitted rolling bearing life prediction model ? Part 2: Model fit to the historical experimental database, Tribology International, vol.39, pp.259-268, 1996.

T. E. Tallian, A datta-fitted rolling bearing life prediction model ? Part 3: Parametric study, comparison to published models and engineering review, Tribology International, vol.39, pp.269-275, 1996.

G. Thoquenne, Prévision des durées de vie en fatigue des roulements. PhDthesis: Ecole Polytechnique, 2004.

C. H. Venner, Multilevel solution of the EHL line and point contact problems, 1991.

C. H. Venner and A. A. Lubrecht, Numerical Simulation of a Transverse Ridge in a Circular EHL Contact Under Rolling/Sliding, Journal of Tribology, vol.116, issue.4, pp.751-761, 1994.
DOI : 10.1115/1.2927329

C. H. Venner and A. A. Lubrecht, Numerical Simulation of Waviness in A Circular Ehl Contact, Under Rolling/Sliding, Proceedings of the 21st Leeds-Lyon Symposium on Tribology, pp.259-272, 1995.
DOI : 10.1016/S0167-8922(08)70635-7

C. H. Venner, F. Couhier, A. A. Lubrecht, and J. A. Greenwood, Amplitude Reduction of Waviness in Transient EHL Line Contacts, Proceedings of the 23rd Leeds-Lyon Symposium on Tribology, pp.103-112, 1997.
DOI : 10.1016/S0167-8922(08)70440-1

C. H. Venner and A. A. Lubrecht, Amplitude reduction of nonisotropic harmonic patterns in circular EHL contacts under pure rolling, Proceedings of the 25th Leeds-Lyon Symposium on Tribology, pp.151-162, 1999.

C. H. Venner and G. E. Morales-espejel, Amplitude reduction of small-amplitude waviness in transient elastohydrodynamically lubricated line contacts, Proc. IMechE, pp.487-504, 1999.
DOI : 10.1243/1350650991542848

C. H. Venner and A. A. Lubrecht, Multilevel Methods in Lubrication, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00663246

C. H. Venner, EHL Film Thickness Computations at Low Speeds: Risk of Artificial Trends as a Result of Poor Accuracy and Implications for Mixed Lubrication Modelling, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.219, issue.4, pp.285-290, 2005.
DOI : 10.1243/135065005X33928

C. H. Venner and A. A. Lubrecht, An Engineering Tool for the Quantitative Prediction of General Roughness Deformation in EHL Contacts Based on Harmonic Waviness Attenuation, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.219, issue.5, pp.303-312, 2005.
DOI : 10.1243/135065005X33973
URL : https://hal.archives-ouvertes.fr/hal-00368448

C. H. Venner and Y. H. Wijnant, Validation of EHL Contact Predictions under Time Varying Load, Proc. IMechE, pp.249-261, 2005.
DOI : 10.1243/135065005X33865

F. Ville, Pollution solide des lubrifiants, indentations et fatigue des surfaces, 1998.

F. Ville and D. Nelias, Influence of the nature and size of solid particles on the indentation features in EHL contacts, Proceedings of the 24th Leeds-Lyon Symposium on Tribology, pp.399-409, 1998.
DOI : 10.1016/S0167-8922(98)80096-5
URL : https://hal.archives-ouvertes.fr/hal-00936415

F. Ville and D. Nelias, Early Fatigue Failure Due to Dents in EHL Contacts, Tribology Transactions, vol.21, issue.4, pp.795-800, 1999.
DOI : 10.1115/1.2927329
URL : https://hal.archives-ouvertes.fr/hal-00936413

F. Ville and D. Nelias, An Experimental Study on the Concentration and Shape of Dents Caused by Spherical Metallic Particles in EHL Contacts??, Tribology Transactions, vol.51, issue.1, pp.231-240, 1999.
DOI : 10.1080/10402009208982117
URL : https://hal.archives-ouvertes.fr/hal-00936412

Q. J. Wang and D. Zhu, Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces, Journal of Tribology, vol.127, issue.4, pp.722-728, 2005.
DOI : 10.1115/1.2000273

M. N. Webster, E. Ioannides, and R. S. Sayles, The effect of topographical defects on the contact stress and fatigue life in rolling element bearings, Proceedings of the 12th Leeds-Lyon Symposium on Tribology, pp.207-221, 1986.

L. D. Wedeven, Influence of Debris Dent on EHD Lubrication, A S L E Transactions, vol.19, issue.1, pp.41-52, 1977.
DOI : 10.1115/1.3452787

L. D. Wedeven and C. Cusano, Elastohydrodynamic Film Thickness Measurements of Artificially Produced Surface Dents and Grooves, A S L E Transactions, vol.12, issue.4, pp.369-381, 1979.
DOI : 10.1243/PIME_PROC_1974_188_024_02

Y. H. Wijnant, Contact dynamics in the field of elastohydrodynamic lubrication, 1998.

G. Xu, F. Sadeghi, and J. D. Cogdell, Debris Denting Effects on Elastohydrodynamic Lubricated Contacts, Journal of Tribology, vol.119, issue.3, pp.579-587, 1997.
DOI : 10.1115/1.2833539

G. Xu, F. Sadeghi, and M. R. Hoeprich, Residual Stresses Due to Debris Effects in EHL Contacts, Tribology Transactions, vol.12, issue.4, pp.613-620, 1997.
DOI : 10.1115/1.3261081

G. Xu, F. Sadeghi, and M. R. Hoeprich, Dent Initiated Spall Formation in EHL Rolling/Sliding Contact, Journal of Tribology, vol.120, issue.3, pp.453-462, 1998.
DOI : 10.1115/1.2834570

?. 11-error-in, . Ehl, and M. Lat, L = 19 as a function of n X . Groove geometry ? = 0, p.38

?. 12-error-in, . Ehl, and M. Lat, Groove geometry ? = 0 38 LIST OF FIGURES 2.13 Error in ?P EHL REAR ?P EHL LAT ?P EHL CEN T for a transient EHL contact M = 200, L = 19 as a function of n X . Indent geometry, p.39

?. 14-error-in, . Ehl, . ?p, . Lat, and M. Ehl, L = 8 as a function of n X . Indent geometry ? = 0, p.40