ASM Handbook, Fatigue and Fracture ASM International, vol.19, p.1057, 1997. ,
Failure Analysis and Prevention 10 edition, English ASM Handbook ASM Handbook, pp.871707047-1184, 2000. ,
Metals Handbook ? Properties and Selection: Nonferrous Alloys and Pure Metals, 1979. ,
Semisolid Metal Casting and Forging, Metals Handbook ? Castings. 9ed. Ohio, pp.327-338, 1988. ,
Standard specification for aluminum-alloy permanent mold castings, pp.108-116, 2008. ,
Standard Practice for Preparation of Metallographic Specimens, pp.3-4, 2007. ,
Standard Practice for Referencing Test Methods for Chemical Analysis of Metals and, pp.2055-99, 1999. ,
Some observations on dendritic arm spacing in Al-Si-Mg and Al-Cu alloy chill castings, Journal of Materials Science, vol.21, issue.8, pp.2781-2786, 1986. ,
Précis de métallurgie: élaboration, structurespropriétés , normalisation, 1997. ,
Analysis of modified 319 aluminum alloy, AFS Transactions, pp.961-973, 1988. ,
High temperature cyclic deformation of precipitation hardened alloy-I. Partially coherent precipitates, Acta Metalurgica, vol.27, pp.12-1861, 1979. ,
High temperature cyclic deformation of precipitation hardened alloy-II. Fully coherent precipitates, Acta Metalurgica, vol.27, pp.12-1873, 1979. ,
Semi-solid formed aluminum, Advanced Materials & Processes. v, vol.152, issue.4, pp.27-28, 1997. ,
Net-shape forming via semi-solid processing, Advanced Materials & Processes. v, vol.143, issue.1, pp.36-40, 1993. ,
The effect of quench rate and mechanical properties of 319 aluminum alloy castings, Materials Science Forum, pp.217-222783, 1996. ,
Casting defects and tensile properties of an Al-Si- Mg alloy, Materials Science and Engineering A, pp.220-109, 1996. ,
Recent Developments in the Thermomechanical Fatigue Life Prediction of Superalloys, JOM-e, V, vol.51, issue.4, pp.1-19, 1999. ,
Lois de comportement viscoplastiques anisothermes pour calculs cycliques sur structures, Acte du 4eme colloque national en calcul des structures, Guedra-Degoerges, Pl. Ladeveze and M. Raous, Teknea, pp.575-580, 1999. ,
Microstructural characteristics of aluminum 2024 by cold working in the SIMA process, Journal of Materials Processing Technology. v, vol.82, pp.107-116, 1998. ,
The influence of induction heating on the microstructure of A356 for semi-solid forging, Journal of Materials Processing Technology. v, vol.87, pp.46-52, 1999. ,
Finite element analysis of compression holding step in semi-solid forging and experimental confirmation, Journal of Materials Processing Technology. v, pp.80-81450, 1998. ,
A study of the effects of cyclic thermal stresses on a ductile metal, Transactions of the ASME, pp.53-76, 1954. ,
A computational approach to thermomechanical fatigue, International Journal of fatigue, vol.26, pp.805-818, 2004. ,
URL : https://hal.archives-ouvertes.fr/hal-00138135
Castings defects and the fatigue life of an aluminum casting alloy, Fatigue Fract. Eng. Mater. Struct, vol.13, pp.213-227, 1990. ,
An experimental study of the effect of a flaw at a notch root on the fatigue life of cast Al 319, International Journal of Fatigue, vol.20, issue.7, pp.517-530, 1998. ,
Fatigue of cast aluminium alloy under constant and variable-amplitude loading, International Journal of Fatigue, issue.182, pp.95-104, 1996. ,
Relationship between microstructural extremum and fracture path in a cast Al-Si-Mg alloy, Scripta Materialia, vol.37, issue.9, pp.1435-1440, 1997. ,
Microstructure and damage mechanisms in A356-T6 alloy, Materials Science Forum, pp.217-2221435, 1996. ,
Cyclcic behavior of the CM247LC-DS superalloy at high temperatures, HIGH TEMPERATURE FATIGUE. Proceedings of CAMP2002, pp.2-13, 2002. ,
Comportamento em fadiga termo-mecânica de superligas à base de níquel, 11º CBECIMAT ? Congresso Brasileiro de Engenharia e Ciência dos Materiais Águas de São, pp.11-14, 1994. ,
Defect sensitive fatigue in a cast aluminium alloy, Proceedings of the 10th conference on the Strength of Materials The Japan Inst. of Metals, Strengh of Materials, pp.501-504, 1994. ,
Thermomechanical fatigue of the cast aluminum alloy GK-AlSi10Mg, in " Symposium of fatigue under Thermal and Mechanical Loadings, Bressers, J. and Rèmy, 1995. ,
Effect of thermal cycle on low cycle fatigue of steels and grain boundary characteristics, In: Mechanical behavior of materials, vol.II, pp.49-58, 1980. ,
Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys, Acta Mater, vol.50, pp.901-927, 2002. ,
Effect of the composition and microalloying with strontium on the structure and properties of Al-Si-Mg alloys. Metal Science and Heat Treatment, pp.7-8623, 1983. ,
A technique for thermal-shock and thermal-fatigue testing based on the use of fluidized solids, Journal of the institute of metals, 1958. ,
A total strain energy density theory for cumulative fatigue damage. Transactions of the ASME, v.110, pp.36-41, 1988. ,
Thermomechanical fatigue on turboengine superalloys, International Conference on Low-Cycle Fatigue and Elasto-Plastic Behaviour of Materials, pp.7-11, 1992. ,
Temperature effects on the strain range portioning approach for creep-fatigue analysis. In: Fatigue at elevated Temperature, pp.658-667, 1973. ,
Thermal fatigue resistance of hypoeutectic aluminum-silicon casting alloys, AFS Transactions, vol.102, pp.367-380, 1994. ,
American Society for Testing and Materials, p, pp.157-169 ,
Fatigue performance of cast aluninium alloy Al-7Si-Mg with surface defects, Journal of Material Science, pp.34811-820, 1999. ,
Effect of gate shape and forging temperature on the injection forging process of semi-solid aluminum material, Journal of Materials Processing Technology. v, vol.73, pp.251-263, 1998. ,
A filling analysis of the forging process of semi-solid aluminum materials considering solidification phenomena, Journal of Materials Processing Technology. v, vol.73, pp.289-302, 1998. ,
The effect of strain rate on macroscopic behavior in the compression forming of semi-solid aluminum alloy, Journal of Materials Processing Technology. v, vol.88, pp.159-168, 1999. ,
Finite element analysis with deformation behavior modeling of globular microstructure in forming process of semi-solid materials, International Journal of Mechanical Sciences. v, vol.41, pp.1423-1445, 1999. ,
A coupled solidification analysis of materials and cooling roller in direct rolling process, Journal of Materials Processing Technology. v, vol.66, pp.277-286, 1997. ,
A finite-element analysis on the upsetting process of semisolid aluminum material, Journal of Materials Processing Technology. v, vol.66, pp.76-84, 1997. ,
The upsetting behavior of semi-solid aluminum material fabricated by mechanical stirring process, Journal of Materials Processing Technology. v, vol.66, pp.30-38, 1997. ,
Aplicações industriais do processamento de metais no estado semi-sólido (PPS): o estado da arte, Metalurgia e Materiais. v.54, pp.475194-197, 1998. ,
Thermomechanical fatigue of particulatereiniforced aluminum 2xxx-T4, Metallurgical Transactions A, vol.22, pp.697-707, 1991. ,
Effects of Fe and Ca on usual and impact fatigue characteristics of AC2B-T6 aluminum casting alloy, Materials Science Forum, pp.217-2221395, 1997. ,
Application of the finite element method to predict material flow and defects in the semi-solid forging of A356 aluminum alloys, Journal of Materials Processing Technology. v, vol.56, pp.106-112, 1996. ,
Effects of dendrite cell size and particle distribution on the near-threshold fatigue crack growth behaviour of cast Al- Si composites, Acta Materialia, issue.6, pp.442249-2257, 1996. ,
Effect of pre-aging on precipitation hardening in Al-Si-Mg alloys, Scandinavian Journal of Metallurgy, issue.3, pp.27112-115, 1998. ,
Modeling the strengthening response to aging process of heat-treatable aluminum alloys containing plate/disc-or rod/needle-shaped precipitates, Mater. Sci. Eng. A, vol.344, pp.113-124, 2003. ,
Microstructural evolution during partial remelting of Al- Si7Mg alloys, Materials Science & Engineering A. v.A203, pp.1-13, 1995. ,
Fatigue of eutectic Al-Si alloys, Materials Science Forum, pp.217-2221343, 1996. ,
Mechanistic model for time-dependent fatigue, Journal Engineering Materials Technology, p.159, 1980. ,
Influence of material stress-strain characteristics on thermomechanical fatigue analysis of IN100 superalloy, Materials at High Temperatures, vol.13, issue.1, pp.47-54, 1995. ,
Thermomechanical Fatigue Behavior of a Superalloy, in "Low Cycle Fatigue, ASTM STP 942, American Society for Testing and Materials, pp.657-671, 1988. ,
On thermal fatigue of nickel-based superalloys, Thermo-Mechanical Fatigue Behavior of Materials, ASTM STP 1263 American Society for Testing and Materials, 1995. ,
Metais -Uma visão objetiva, 2004. ,
Fatigue properties of sand cast, stir cast and extruded Al-7Si-0.3Mg alloy with trace additions of Be and Mn, Mater. Trans, vol.38, pp.28-36, 1997. ,
Al-7Si-0.3Mg cast alloy: formation and crystal structure of ?-FeSiAl5 and (Be-Fe)-BeSiFe2Al8 phases, Materials Science Forum, pp.217-222207, 1996. ,
Relation between striation spacing and fatigue crack growth rate in A1-Alloy Sheets. Advanced in Fracture Research, pp.3483-3491, 1989. ,
Thermo-mechanical fatigue, oxidation and creep: Part I: Experiments, Metallurgical Transactions A. v, vol.20, pp.1755-1767, 1989. ,
Thermo-mechanical fatigue, oxidation and creep: Part II: Life prediction, Metallurgical Transactions A. v, vol.20, pp.1769-1783, 1989. ,
Fatigue properties of an A356 (AlSi7Mg) aluminium alloy for automotive applications-fatigue life prediction. SAE technical paper, Society of Automotive Engineers, pp.25-32, 1994. ,
A continuum mechanics model for mechanical fatigue analysis, Computational Materials Science, vol.32, pp.175-195, 2005. ,
Dendrite Arm Spacing (DAS): A nondestructive test to evaluate tensile properties of premium alloy (Al-Si-Mg) castings, AFS International Cast Metals Journal, issue.61, pp.26-40, 1981. ,
The behaviour of short fatigue cracks, 1986. ,
Fracture at high temperatures, 1987. ,
Mechanical Behavior of Engineering Materials, pp.978-981, 2007. ,
Thixo-forming of Al-Cu alloys, Journal of Materials Processing Technology. v, pp.92-9342, 1999. ,
Pore characterization in a model cast aluminium alloy and its quantitative relation to fatigue life studied by synchrotron Xray microtomography, International Conference on Aluminium Alloys, pp.197-202, 2000. ,
Creep failure mechanisms of a Ti-6Al-4V thick plate, pp.741-750, 2001. ,
Prediction of thermomechanical fatigue lives in metal matrix composites, Metallurgical Transactions A, vol.23, pp.2029-2038, 1992. ,
Relation of defect size and location to fatigue failure in Al alloy A356 cast specimens, Proceedings of the conference on high cycle fatigue of structural materials, 1997. ,
Multiaxial creep-fatigue under anisothermal conditions, Fatigue Fracture Engineering Material Structure, vol.23, pp.241-252, 2000. ,
Thermal-mechanical fatigue lifetime prediction of an austenitic stainless steel, Advances in Fatigue Lifetime Predictive Techniques, pp.105-116, 1993. ,
High Temperature Isothermal and Thermomechanical Fatigue on a Molybdenum-Based Alloy, Materials Science and Engineering, pp.180-186, 1998. ,
Fatigue life assessment of aluminum alloys with casting defects, Eng. Fracture Mech, vol.44, pp.857-874, 1993. ,
A uniaxial cyclic plasticity model including transient material behavior, Fatigue Eng. Mater. Struct, vol.12, pp.611-625, 1989. ,
Crack initiation and growth in simple metal components during thermal cicling, High Temperature, p.222, 1983. ,
The determination of hysteresis loops in thermo-mechanical fatigue using isothermal stress data. Fatigue Fracture Engineering Structure, pp.479-496, 1994. ,
Modeling high-temperature stress-strain behavior of cast aluminum alloy, Metallurgical Materials. Transactions, vol.30, pp.133-146, 1999. ,
Fatigue strength and applications of cast aluminium alloy with different degrees of porosity, International Journal of Fatigue, issue.152, pp.75-84, 1993. ,
Fundição sob pressão: é possível produzir peças em várias ligas. FS -Fundição e Serviço, ano III, n° 19, pp.12-18, 1993. ,
Rheological behavior of Sn- 15 pct Pb in the crystallization, Metallurgical Transactions. v, vol.3, pp.1925-1932, 1972. ,
Low cycle fatigue and creep???fatigue interaction behavior of 316L(N) stainless steel and life prediction by artificial neural network approach, International Journal of Fatigue, vol.25, issue.12, pp.25-1327, 2003. ,
DOI : 10.1016/S0142-1123(03)00064-1
Fatigue and fatigue crack propagation in AlSi7Mg cast alloys under in-service loading conditions, International Journal of Fatigue, issue.2, pp.17145-155, 1995. ,
Influence of material and mechanical properties on thermal fatigue life of aluminum castings, Aluminum Applications for Automotive Design, pp.47-57, 1995. ,
Elevated Temperature fatigue interactions in engineering materials, Metal Science, vol.11, pp.414-424, 1977. ,
Stiffness and Deflection Analysis of Complex Structures, J Aeron Sci, vol.23, issue.9, pp.805-823, 1956. ,
Grain boundary ductile fracture in precipitation hardened aluminum alloys, Acta Metallurgica, vol.35, issue.6, pp.35-1193, 1987. ,
DOI : 10.1016/0001-6160(87)90001-0
A model for thermal fatigue in an aluminium casting alloy, International Journal of Fatigue, vol.17, issue.6, pp.399-406, 1995. ,
DOI : 10.1016/0142-1123(95)00009-I
Microstructural effects on the fatigue properties of a cast Al7SiMg alloy, AFS Transactions, vol.92, pp.459-466, 1984. ,
The fracture mode in Al-Si-Mg casting alloys, Materials Science and Engineering A, pp.241-72, 1997. ,
Microstructure and mechanical properties of AlSi(Mg) casting alloys, SAE -Transactions, vol.93, pp.728-735, 1984. ,
Low cycle fatigue of A356-T6 cast aluminum alloy. Society of Automotive Engineers, 1987. ,
Possibility of improving tensile strength of semi-solid processed A356 alloy by a post heat treatment at an extremely high temperature, Scripta Materialia. v, vol.41, issue.7, pp.767-771, 1999. ,