G. Blustein, M. C. Deyá, R. Romagnoli, B. B. Del-amo-38, P. Rossenbeck et al., Three generations of inorganic phosphates in solvent and water-borne paints: A synergism case Applied Surface Science Corrosion protection of Zn-phosphate containing water borne dispersion coatings on steel: Part 1: Design and analysis of model water based latex films on iron substrates The passivation of zinc in slightly acidic buffered solutions in the presence of phosphate ions Surface pre-coating of talc particles by carboxyl methyl cellulose adsorption: Study of adsorption and consequences on surface properties and settling rate, Interaction forces between talc and hydrophobic particles probed by AFM. Colloids and Surfaces A: Physicochemical and Engineering Aspects, pp.1386-1397, 1988.

M. P. Comard, R. Calvet, H. Balard, and J. A. , Dodds Influence of the geological history, particle size and carbonate content on the surface properties of talc as determined by inverse gas chromatography at infinite dilution. Colloids and Surfaces A: Physicochemical and Engineering Aspects Effects of the shape properties of talc and quartz particles on the wettability based separation processes, 44. K. Terada, E. Yonemochi, Physicochemical properties and surface free energy of ground talc. Solid State Ionics, pp.37-42, 2004.

T. Lawrence and . Drzal, The interphase in epoxy composites Advances in Polymer Science, pp.1-32, 1986.

B. J. Intorre, T. K. Kwei, and C. M. Peterson, Sorption behavior of the diglycidyl ether of bisphenol A. The Journal of Physical Chemistry Determination of the restricted segmental mobility dimensions of adsorbed polymers, Progress in Organic Coatings, pp.55-59, 1963.

A. Hartwig, M. Sebald, D. Pütz, and L. , Aberle, Preparation, Characterisation and Properties of Nanocomposites Based on Epoxy Resins-An Overview, Macromolecular Symposia, pp.127-136, 2005.

J. Y. Lee, M. J. Shim, S. W. Kim-sun, Z. Zhang, and C. P. Wong, Effect of Natural Zeolite on the Mechanical Properties of Epoxy Matrix Influence of interphase and moisture on the dielectric spectroscopy of epoxy/silica composites Modification of Epoxy Resin with Kaolin as a Toughening Agent Effect of coupling agents on thermal and electrical properties of mica/epoxy composites, Polymer Engineering and Science Polymer Journal of Applied Polymer Science Journal of Applied Polymer Science, vol.39, issue.5610, pp.2297-2305, 1993.

G. Zhuang, Y. Yang, and B. Li, Reinforced effect of wollastonite on phenolphthalein poly(ether ketone), Journal of Applied Polymer Science, vol.65, issue.4, pp.649-653, 1997.
DOI : 10.1002/(SICI)1097-4628(19970725)65:4<649::AID-APP3>3.0.CO;2-K

C. J. Landry, B. K. Coltrain, M. R. Landry, J. J. Fitzgerald, and V. K. Long, Poly(vinyl acetate)/silica-filled materials: material properties of in situ vs fumed silica particles, Macromolecules, vol.26, issue.14, pp.3702-3712, 1993.
DOI : 10.1021/ma00066a032

M. T. Rodr´?guez, J. J. Gracenea, A. H. Kudama, and J. J. Suay, The influence of pigment volume concentration (PVC) on the properties of an epoxy coating Part I. Thermal and mechanical properties, Progress in Organic Coatings, vol.50, issue.1, pp.62-67, 2004.
DOI : 10.1016/j.porgcoat.2003.10.013

W. Possart, J. K. Krüger, C. Wehlack, U. Müller, C. Petersen et al., Formation and structure of epoxy network interphases at the contact to native metal surfaces, Comptes Rendus Chimie, vol.9, issue.1, pp.60-79, 2006.
DOI : 10.1016/j.crci.2005.04.009

J. Bouchet, A. A. Roche, P. Hamelin-potvin, L. Brossard, and G. Larochelle, Internal stresses, Young's modulus and practical adhesion of organic coatings applied onto 5754 aluminium alloy Thin Solid Films Etude des mécanismes de formation de l'interphase dans les systèmes époxy-amine/aluminium Université de Paris-Val-de-Marne: Paris. 181 p. 59 Corrosion protective performances of commercial lox-VOC epoxy/polyurethane coatings on hot ? rolled 1010 mild steel The modification of epoxy/metal interphases by adsorbed contaminants, 60. Z.W. Wicks Jr., Corrosion Protection by Coatings, pp.355-356, 1987.

J. E. De-vries, L. P. Haack, J. W. Holubka, and R. A. Dickie, Interfacial chemistry of epoxy-modified poly(vinyl chloride) adhesive on cold-rolled and galvanized steels, Journal of Adhesion Science and Technology, vol.149, issue.1, pp.203-211, 1989.
DOI : 10.1163/156856189X00155

. Villatte, Adsorption of monoethanolamine on clean, oxidized and hydroxylated aluminium surfaces: a model for amine-cured epoxy/aluminium interfaces, Applied Surface Science, vol.81, pp.435-441, 1994.

H. Kollek, Some aspects of chemistry in adhesion on anodized aluminium, 65. S. Popineau Annales de Chimie -Science des Matériaux, pp.75-80, 1985.
DOI : 10.1016/0143-7496(85)90019-3

P. Montois, V. Nassiet, J. A. Petit, and Y. Baziard, Viscosity effect on epoxy???diamine/metal interphases, International Journal of Adhesion and Adhesives, vol.26, issue.6, pp.391-399, 2006.
DOI : 10.1016/j.ijadhadh.2005.06.003

P. Montois, V. Nassiet, J. A. Petit, and D. Adrian, Viscosity effect on epoxy-diamine/metal interphases???Part II: Mechanical resistance and durability, International Journal of Adhesion and Adhesives, vol.27, issue.2, pp.145-155, 2007.
DOI : 10.1016/j.ijadhadh.2006.03.001

P. Couvrat, Le collage structural moderne_Théorie et Pratique Paris. 70. J.Briant, Phénomènes d'interface agents de surface-principes et modes d'action: édition TECHNIP, publications de l'institut français du pétrole, pp.145-146, 1992.

M. Greiveldinger, Mécanismes d'adhésion sur tôles grasses et tenue mécanique en milieu humide, 2000.

J. W. Mcbain, D. G. Hopkins, G. Leps, and J. Meinhardt, Thèse de l'INSA de Lyon: Villeurbanne. 183 p. 73 Adherend surface morphology and its influence on the peel strength of adhesive joints bonded with modified phenolic and epoxy structural adhesives Surface modification for improved adhesion of a polymer-metal compound The Mechanical Theory of Adhesion?Changing Perceptions 1925- 1991 The science of adhesion Some effects of substrate roughness on wettability, International Journal of Adhesion and Adhesives Surface and Coatings Technology The Journal of Adhesion A. J. Kinloch Journal of Materials Science Journal of Materials Science, vol.14, issue.16, pp.137-144, 1926.

W. Cheng, P. F. Dunn, and R. M. Brach, Surface roughness effects onmicroparticle adhesion, The Journal of Adhesion, vol.78, issue.11, pp.929-965, 2002.
DOI : 10.1017/CBO9781139171731

D. B. Maugis-81, N. A. Deryagin, V. V. Krotova, Y. M. Karassev, I. N. Kirllova et al., Autoadhesion and Adhesion of High Polymers Some reflections on contemporary views of theories of adhesion Chemical nature of the rubber to glass bond, Journal of Adhesion Science and Technology Proceeding of the 2nd Int. Congress on Surface Activity ? III 84. A. J. Kinloch, Adhesion and Adhesives 86. A. Roche, Les théories de l'adhésion et mesure de l'adhérence. Le Vide, les Couches Minces Surface energetics, adhesion and adhesive joints In: Contact angle, wettability and adhesionAdvances in Chemistry Series, pp.161-175, 1946.

J. J. Bikerman-89, R. P. Gent, and . Petrich, CAUSES OF POOR ADHESION: WEAK BOUNDARY LAYERS, Effect of Wetting Liquids on the Strength of Adhesion of Viscoelastic Material, pp.40-44, 1967.
DOI : 10.1021/ie51403a010

D. Maugis, M. G. Barquins-93, A. G. Lake, and . Thomas, Fracture mechanics and the adherence of viscoelastic bodies, Journal of Physics D: Applied Physics, vol.11, issue.14, pp.1989-2023, 1967.
DOI : 10.1088/0022-3727/11/14/011

M. E. Shanahan and F. Michel, Physical adhesion of rubber to glass: cross-link density effects near equilibrium, International Journal of Adhesion and Adhesives, vol.11, issue.3, pp.170-176, 1991.
DOI : 10.1016/0143-7496(91)90019-E

T. W. Martin and Z. S. Derewenda, The name is bond ? H bond, Nature Structural Biology, vol.6, issue.5, pp.403-406, 1999.
DOI : 10.1038/8195

L. Robert, I. E. Patrick-marcel-dekker, V. Burdova, . Ya, O. V. Kustovskii et al., Role of acid-base interfacial bonding in adhesion The role of acid-base interactions in the formation of polymer-metal adhesive joints, 99. I. A. Starostina, R. R. Khasbiullin, O. V. Stoyanov, and A. E. Chalykh, Acid-Base Interactions at the Modified Polyethylene-Metal Interface, pp.7-27, 1967.

M. Brogly, Etude des effets de structuration au sein de films minces polymères adsorbés. La Revue de Métallurgie-CIT, Science et Génie des Matériaux, pp.175-184, 2001.

V. Ya, I. A. Kustovskii, O. V. Starostina, and . Stoyanov, Acid_Base Interactions and Adhesion Capacity in the System Constituted by an Epoxy Coating and a Metal, Journal of Applied Chemistry, vol.79, issue.6, pp.930-933, 2006.

C. Fauquet, Etude expérimentale d'une interface modèle aluminium/adhésif époxy, Thèse de l, 1992.

J. Bouchet, A. A. Roche, and E. Jacquelin, Determination of residual stresses in coated metallic substrates, Journal of Adhesion Science and Technology, vol.12, issue.3, pp.321-343, 2001.
DOI : 10.1163/156856194X00366

L. Lee, Molecular Bonding and Adhesion at Polymer-Metal Interphases, The Journal of Adhesion, vol.126, issue.1-4, pp.15-38, 1994.
DOI : 10.1163/156856190X00414

R. P. Digby and D. E. Paekham, Pretreatment of aluminium: topography, surface chemistry and adhesive bond durability, International Journal of Adhesion and Adhesives, vol.15, issue.2, pp.61-71, 1995.
DOI : 10.1016/0143-7496(95)98739-9

D. M. Brewis and G. W. Critchlow, Locus of failure of T-peel joints formed between aluminium and various adhesives, International Journal of Adhesion and Adhesives, vol.17, issue.1, pp.33-38, 1997.
DOI : 10.1016/S0143-7496(96)00025-5

A. N. Gent and S. Y. Kaang, Effect of Peel Angle Upon Peel Force, The Journal of Adhesion, vol.6, issue.2-4, pp.173-181, 1987.
DOI : 10.1002/app.1987.070330512

H. R. Daghyani, L. Ye, and Y. W. , Mai Evaluation of Mode-II Fracture Energy of Adhesive Joints with Different Bond Thickness The Journal of Adhesion, pp.1-4, 1996.

A. J. Kinloch, C. C. Lau, and J. G. Williams, The peeling of flexible laminates, International Journal of Fracture, vol.24, issue.1, pp.45-70, 1994.
DOI : 10.1007/BF00012635

M. Bosma and M. Oosterbroek, A quantitative adhesion test for coated plastics, International Journal of Adhesion and Adhesives, vol.14, issue.2, pp.93-102, 1994.
DOI : 10.1016/0143-7496(94)90003-5

M. P. Turunen, P. Marjamaki, M. Paajanen, J. Lahtinen, and J. K. Kivilahti, Pulloff test in the assessment of adhesion at printed wiring board metallisation/epoxy interface. Microelectronics Reliability, pp.993-1007, 2004.

J. Bouchet, Influence des propriétés d'interphase sur les comportements d'éléments structuraux de multi-matériaux carbone-epoxy/aluminium : cas des absorbeurs d'énergie, 1992.

M. Esfandeh, S. M. Mirabedini, S. Pazokifard, and M. Tari, Study of silicone coating adhesion to an epoxy undercoat using silane compounds, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.302, issue.1-3, pp.11-16, 2007.
DOI : 10.1016/j.colsurfa.2007.01.031

C. Merlatti, F. X. Perrin, E. Aragon, and A. Margaillan, Evaluation of physico-chemical changes in sub-layers of multi-layer anticorrosive marine paint systems: Plasticizer and solvent release, Progress in Organic Coatings, pp.53-62, 2008.
DOI : 10.1016/j.porgcoat.2007.09.001

S. M. Mirabedinia, J. D. Scantlebury, G. E. Thompson, and S. Moradian, Adhesive strength of powder coated aluminium substrates, International Journal of Adhesion and Adhesives, vol.25, issue.6, pp.484-494, 2005.
DOI : 10.1016/j.ijadhadh.2005.01.005

T. Lux, Adhesion of copper on polyimide deposited by arc-enhanced deposition, Surface and Coatings Technology, vol.133, issue.134, pp.425-429, 2000.
DOI : 10.1016/S0257-8972(00)00897-5

D. Roy, G. P. Simon, M. Forsyth, and J. , Modification of thermoplastic coatings for improved cathodic disbondment performance on a steel substrate: a study on failure mechanisms, International Journal of Adhesion and Adhesives, vol.22, issue.5, pp.395-403, 2002.
DOI : 10.1016/S0143-7496(02)00020-9

J. V. Brand, S. V. Gils, H. Terryn, V. G. Sivel, and J. H. De-wit, Changes in epoxy-coated aluminium due to exposure to water, Progress in Organic Coatings, pp.351-364, 2004.

D. Jinks, A variable radius roll test for measuring the adhesion of paint systems to deformable steel substrates, 2003.

K. H. Zabel, R. E. Boomgaard, G. E. Thompson, S. Turgoose, and H. A. Braun, Properties of ketimine/acetoacetate coated aluminum substrates, Progress in Organic Coatings, pp.236-244, 1998.
DOI : 10.1016/S0300-9440(98)00016-2

Y. Grohens, B. George, F. Touyeras, J. Vebrel, and B. Laude, Experimental design as a route for improving the performances of formulated epoxy adhesives, Polymer Testing, vol.16, issue.5, pp.417-427, 1997.
DOI : 10.1016/S0142-9418(97)00002-0

V. V. Arslanov and W. Funke, The effect of water on the adhesion of organic coatings on aluminium Progress in Organic Coatings, pp.355-363, 1988.

Q. S. Yu and H. K. Yasuda, Protection of aluminum alloys from filiform corrosion by lowtemperature plasma interface engineering, Progress in Organic Coatings, pp.217-226, 2005.

W. Funke, Problems and progress in organic coatings science and technology, Progress in Organic Coatings, pp.5-9, 1997.
DOI : 10.1016/S0300-9440(97)00013-1

J. Marsh, J. D. Scantlebury, and S. B. Lyon, The effect of surface/primer treatments on the performance of alkyd coated steel, Corrosion Science, vol.43, issue.5, pp.829-852, 2001.
DOI : 10.1016/S0010-938X(00)00070-6

V. V. Arslanov and W. Funke, Improvement of the resistance to water of an adhesive joint between polymers and aluminium by using thin adhesion layers, Progress in Organic Coatings, vol.15, issue.4, pp.365-372, 1988.
DOI : 10.1016/0033-0655(88)85005-2

M. K. Harun, J. Marsh, and S. B. Lyon, The effect of surface modification on the cathodic disbondment rate of epoxy and alkyd coatings, Progress in Organic Coatings, pp.317-321, 2005.
DOI : 10.1016/j.porgcoat.2005.07.007

M. K. Antoon, J. L. Koenig, and T. Serafini, Fourier-transform infrared study of the reversible interaction of water and a crosslinked epoxy matrix, Journal of Polymer Science: Polymer Physics Edition, vol.19, issue.10, pp.1567-1575, 1981.
DOI : 10.1002/pol.1981.180191007

J. Klotz, W. Brostow, M. Hess, and W. S. Veeman, Epoxy and glass composites in water studied with2H-NMR, Polymer Engineering & Science, vol.176, issue.8, pp.1129-1133, 1996.
DOI : 10.1002/pen.10506

C. Carfagna, A. Apicella, and L. Nicolais, The effect of the prepolymer composition of amino-hardened epoxy resins on the water sorption behavior and plasticization, Journal of Applied Polymer Science, vol.27, issue.1, pp.105-112, 1982.
DOI : 10.1002/app.1982.070270112

P. Peyser and W. D. Bascom, The anomalous lowering of the glass transition of an epoxy resin by plasticization with water, Journal of Materials Science, vol.11, issue.1, pp.75-83, 1981.
DOI : 10.1007/BF00552061

B. C. Ennis, P. J. Pearce, and C. E. Morris, Aging and performance of structural film adhesives. III. Effect of humidity on a modern aerospace adhesive, Journal of Applied Polymer Science, vol.37, issue.1, pp.15-32, 1989.
DOI : 10.1002/app.1989.070370102

C. Maggana and P. Pissis, TSDC studies of the effects of plasticizer and water on the sub-Tg relaxations of an epoxy resin system, Journal of Macromolecular Science, Part B, vol.36, issue.6, pp.749-772, 1997.
DOI : 10.1080/00222349708212400

R. J. Morgan, J. E. O-'neal, and D. L. Fanter, The effect of moisture on the physical and mechanical integrity of epoxies, Journal of Materials Science, vol.18, issue.3, pp.751-764, 1980.
DOI : 10.1007/BF00551743

B. De-'neve and M. E. Shanahan, Effects of humidity on an epoxy adhesive, International Journal of Adhesion and Adhesives, vol.12, issue.3, pp.191-196, 1992.
DOI : 10.1016/0143-7496(92)90053-X

G. Sharon, H. Dodiuk, and S. Kenig, Hygrothermal Properties of Epoxy Film Adhesives The Journal of Adhesion, pp.1-4, 1989.

C. Carfagna, P. Mastronardi, and L. Nicolais, Hygrothermal ageing of epoxy based coatings, Journal of Materials Science, vol.21, issue.8, pp.2239-2244, 1982.
DOI : 10.1007/BF00543733

P. Bonniau and A. R. Bunsell, A Comparative Study of Water Absorption Theories Applied to Glass Epoxy Composites, Journal of Composite Materials, vol.25, issue.3, pp.272-293, 1981.
DOI : 10.1177/002199838101500306

R. T. Fuller, R. E. Fornes, and J. D. Memory, NMR study of water absorbed by epoxy resin, Journal of Applied Polymer Science, vol.23, issue.6, pp.1871-1874, 1979.
DOI : 10.1002/app.1979.070230627

L. W. Jelinski, J. J. Dumais, A. L. Cholli, T. S. Ellis, and F. E. Karasz, Nature of the water-epoxy interaction, Macromolecules, vol.18, issue.6, pp.1091-1095, 1985.
DOI : 10.1021/ma00148a008

P. Nogueira, C. Ramirez, A. Torres, M. J. Abad, J. Cano et al., Effect of water sorption on the structure and mechanical properties of an epoxy resin system, Journal of Applied Polymer Science, vol.261, issue.1, pp.71-80, 2001.
DOI : 10.1002/1097-4628(20010404)80:1<71::AID-APP1077>3.0.CO;2-H

D. Colombini, J. J. Martinez-vega, and G. Merle, Dynamic mechanical investigations of the effects of water sorption and physical ageing on an epoxy resin system, Polymer, vol.43, issue.16, pp.4479-4485, 2002.
DOI : 10.1016/S0032-3861(02)00272-0

C. Grave, I. Mcewan, and R. A. Pethrick, Influence of stoichiometric ratio on water absorption in epoxy resins, Journal of Applied Polymer Science, vol.69, issue.12, pp.2369-2376, 1998.
DOI : 10.1002/(SICI)1097-4628(19980919)69:12<2369::AID-APP8>3.0.CO;2-6

T. G. Fox, Infuence of diluent and of copolymer composition on the glass temperature of a polymer system, Bulletin, vol.1, p.123, 1956.

D. M. Brewis, J. Comyn, R. J. Shalash, and J. L. Tegg, Interaction of water with some epoxide adhesives, Polymer, vol.21, issue.3, pp.357-360, 1980.
DOI : 10.1016/0032-3861(80)90282-7

A. Chateauminois, B. Chabert, J. P. Soulier, and L. Vincent, Dynamic mechanical analysis of epoxy composites plasticized by water: Artifact and reality, Polymer Composites, vol.34, issue.4, pp.288-296, 1995.
DOI : 10.1002/pc.750160405

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature, Polymer, vol.40, issue.20, pp.5513-5522, 1999.
DOI : 10.1016/S0032-3861(98)00791-5

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.
DOI : 10.1016/S0032-3861(98)00790-3

L. El-sa-'ad, M. I. Darby, and B. Yates, Moisture absorption characteristics of rubber particulate filled epoxy adhesives, Journal of Materials Science, vol.22, issue.5, pp.1653-1659, 1989.
DOI : 10.1007/BF01105687

L. El-sa-'ad, M. I. Darby, and B. Yates, Moisture absorption by epoxy resins: The reverse thermal effect, Journal of Materials Science, vol.20, issue.8, pp.3577-3582, 1990.
DOI : 10.1007/BF00575392

S. K. Karad, F. R. Jones, and D. Attwood, Moisture absorption by cyanate ester modified epoxy resin matrices. Part II. The reverse thermal effect, Polymer, vol.43, issue.21, pp.5643-5649, 2002.
DOI : 10.1016/S0032-3861(02)00484-6

D. G. Lee, J. W. Kwon, and D. H. Cho, Hygrothermal effects on the strength of adhesively bonded joints, Journal of Adhesion Science and Technology, vol.12, issue.11, pp.1253-1275, 1998.

S. Gan, J. K. Gillham, and R. B. Prime, A methodology for characterizing reactive coatings: Time???temperature???transformation (TTT) analysis of the competition between cure, evaporation, and thermal degradation for an epoxy-phenolic system, Journal of Applied Polymer Science, vol.37, issue.3, pp.803-816, 1989.
DOI : 10.1002/app.1989.070370316

S. Gazit, Dimensional changes in glass-filled epoxy resin as a result of absorption of atmospheric moisture, Journal of Applied Polymer Science, vol.22, issue.12, pp.3547-3558, 1978.
DOI : 10.1002/app.1978.070221219

G. Z. Xiao and M. E. Shanahan, Irreversible effects of hygrothermal aging on DGEBA/DDA epoxy resin, Journal of Applied Polymer Science, vol.69, issue.2, pp.363-369, 1998.
DOI : 10.1002/(SICI)1097-4628(19980711)69:2<363::AID-APP18>3.0.CO;2-X

M. J. Adamson, Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials, Journal of Materials Science, vol.98, issue.2, pp.1736-1745, 1980.
DOI : 10.1007/BF00550593

B. De-'neve and M. E. Shanahan, Physical and Chemical Effects in An Epoxy Resin Exposed to Water Vapour, The Journal of Adhesion, vol.49, issue.3-4, pp.165-176, 1995.
DOI : 10.1002/app.1989.070370102

W. J. Mikols, J. C. Seferis, A. Apicella, and L. Nicolais, Evaluation of structural changes in epoxy systems by moisture sorption-desorption and dynamic mechanical studies, Polymer Composites, vol.21, issue.3, pp.118-124, 1982.
DOI : 10.1002/pc.750030304

L. R. Bao, A. F. Yee, and C. Y. Lee, Moisture absorption and hygrothermal aging in a bismaleimide resin, Polymer, vol.42, issue.17, pp.7327-7333, 2001.
DOI : 10.1016/S0032-3861(01)00238-5

K. I. Ivanova, R. A. Pethrick, and S. Affrossman, Hygrothermal aging of rubber-modified and mineral-filled dicyandiamide-cured DGEBA epoxy resin. II. Dynamic mechanical thermal analysis, Journal of Applied Polymer Science, vol.260, issue.14, pp.3477-3485, 2001.
DOI : 10.1002/app.2209

D. H. Kaelble, A relationship between the fracture mechanics and surface energetics failure criteria, Journal of Applied Polymer Science, vol.18, issue.6, pp.1869-1889, 1973.
DOI : 10.1002/app.1974.070180622

A. J. Kinloch, Interfacial Fracture Mechanical Aspects of Adhesive Bonded Joints???A Review, The Journal of Adhesion, vol.4, issue.3, pp.193-219, 1979.
DOI : 10.1080/00218467308072233

G. Z. Xiao and M. E. Shanahan, Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing, Polymer, vol.39, issue.14, pp.3253-3260, 1998.
DOI : 10.1016/S0032-3861(97)10060-X

K. Vine, P. Cawley, and A. J. Kinloch, The Correlation of Non-Destructive Measurements and Toughness Changes in Adhesive Joints during Environmental Attack, The Journal of Adhesion, vol.11, issue.2, pp.125-161, 2001.
DOI : 10.1080/00218469908009557

E. H. Andrews and A. Stevenson, Adhesive Failure of Epoxy-Titanium Bonds in Aqueous Environments, The Journal of Adhesion, vol.6, issue.1, pp.17-40, 1980.
DOI : 10.1080/00218468008078902

B. M. Parker, Adhesive bonding of fibre-reinforced composites, International Journal of Adhesion and Adhesives, vol.14, issue.2, pp.137-143, 1994.
DOI : 10.1016/0143-7496(94)90009-4

J. F. Watts, R. A. Blunden, and T. J. Hall, The failure mode of adhesively bonded aluminium following aqueous exposure, Surface and Interface Analysis, vol.4, issue.1-12, pp.1-12, 1990.
DOI : 10.1002/sia.740160150

D. M. Brewis, J. Comyn, B. C. Cope, and A. C. Moloney, Effect of carriers on the performance of aluminum alloy joints bonded with a structural film adhesive, Polymer Engineering and Science, vol.10, issue.12, pp.797-803, 1981.
DOI : 10.1002/pen.760211210

G. Béranger and H. Mazille, Les facteurs de la corrosion, Prévention et lutte contre la corrosion Publié sous la direction de B, 2004.

. Wery, Presses Polytechniques et Universitaires Romandes, pp.26-44

Z. W. Wicks, F. N. Jones, and S. P. , Pappas Organic Coatings: Science and Technology, 1994.

N. S. Sangaj and V. C. , Permeability of polymers in protective organic coatings, Progress in Organic Coatings, pp.28-39, 2004.
DOI : 10.1016/j.porgcoat.2003.09.015

F. Dorval, A. Denoyelle, and J. Joud, Influence d'un Primaire d'Adhésion à Fonction Amine sur le Vieillissement en Milieu Humide d'un Assemblage Colle Epoxy/Acier Inoxydable. Le Vide ISSN 1266-0167. Congrès: Journées d'Etude sur l'Adhésion No11, NS (236 p.), 2001.

I. Linossier, F. Gaillard, M. Romand, and T. Nguyen, A Spectroscopic Technique for Studies of Water Transport Along the Interface and Hydrolytic Stability of Polymer/Substrate Systems, The Journal of Adhesion, vol.272, issue.3-4, pp.221-239, 1999.
DOI : 10.1557/PROC-385-57

M. R. Bowditch, The durability of adhesive joints in the presence of water, International Journal of Adhesion and Adhesives, vol.16, issue.2, pp.73-79, 1996.
DOI : 10.1016/0143-7496(96)00001-2

M. P. Zanni-deffarges and M. E. Shanahan, Bulk and Interphase Effects in Aged Structural Joints, The Journal of Adhesion, vol.11, issue.1-4, pp.1-4, 1994.
DOI : 10.1080/00218468108071199

R. A. Pethrick, P. Boinard, and W. M. Banks, Use of dielectric spectroscopy to assess adhesively bonded composite structures, Part II: Dielectric study, The Journal of Adhesion, vol.35, issue.3, pp.1015-1026, 2002.
DOI : 10.1002/pol.1967.150050711

W. K. Loh, A. D. Crocombe, M. M. Wahab, and I. A. Ashcroft, Environmental degradation of the interfacial fracture energy in an adhesively bonded joint, Engineering Fracture Mechanics, vol.69, issue.18, pp.2113-2128, 2002.
DOI : 10.1016/S0013-7944(02)00004-8

A. N. Netravali, R. E. Fornes, R. D. Gilbert, and J. D. Memory, Effects of water sorption at different temperatures on permanent changes in an epoxy, Journal of Applied Polymer Science, vol.30, issue.4, pp.1573-1578, 1985.
DOI : 10.1002/app.1985.070300422

K. Sato, The internal stress of coating films, Progress in Organic Coatings, vol.8, issue.2, pp.143-160, 1980.
DOI : 10.1016/0300-9440(80)80011-7

D. Y. Perera, On adhesion and stress in organic coatings, Progress in Organic Coatings, pp.21-23, 1996.
DOI : 10.1016/0300-9440(95)00585-4

M. Oosterbroek, R. J. Lammers, L. G. Van-der-ven, and D. Y. , Perera Crack formation and stress development in an organic coating, Journal of Coatings Technology (JCT), vol.63, issue.797, pp.55-60, 1991.

A. F. Abdelkader and J. R. White, Comparison of internal stresses in coatings cured on rigid substrates and on unrestrained thin substrates, Progress in Organic Coatings, pp.121-129, 2002.
DOI : 10.1016/S0300-9440(01)00251-X

H. Leidheiser and W. Funke, Water Disbondment and Wet Adhesion of Organic Coatings on Metals: A Review and Interpretation. Journal of the Oil Colour Chemists's Association, pp.121-132, 1987.

A. F. Abdelkader and J. R. White, Influence of relative humidity on the development of internal stresses in epoxy resin based coatings, Journal of Materials Science, vol.37, issue.22, pp.4769-4773, 2002.
DOI : 10.1023/A:1020838919470

W. K. Loh, A. D. Crocombe, M. M. Wahab, J. F. Watts, and I. A. Ashcroft, The effect of moisture on the failure locus and fracture energy of an epoxy???steel interface, Journal of Adhesion Science and Technology, vol.16, issue.11, pp.1407-1429, 2002.
DOI : 10.1163/15685610051066758

L. Heux, J. L. Halary, F. Lauprêtre, and L. Monnerie, Dynamic mechanical and 13C n.m.r. investigations of molecular motions involved in the ?? relaxation of epoxy networks based on DGEBA and aliphatic amines, Polymer, vol.38, issue.8, pp.1767-1778, 1997.
DOI : 10.1016/S0032-3861(96)00694-5

I. Merdas, F. Thominette, and J. Verdu, Humid aging of polyetherimide. II. Consequences of water absorption on thermomechanical properties, Journal of Applied Polymer Science, vol.57, issue.7, pp.1445-1451, 2000.
DOI : 10.1002/1097-4628(20000815)77:7<1445::AID-APP6>3.0.CO;2-N

A. Amirudin and D. Thierry, Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals, Progress in Organic Coatings, vol.26, issue.1, pp.1-28, 1995.
DOI : 10.1016/0300-9440(95)00581-1

D. Loveday, P. Peterson, and B. Rodgers, Evaluation of Organic Coatings with Electrochemical Impedance spectroscopy. Part 1: Fundamentals of electrochemical impedance spectroscopy, Journal of Coatings Technology (JCT Coatings Tech), pp.46-52, 2004.

J. J. Suay, M. T. Rodriguez, K. A. Razzaq, J. J. Carpio, and J. J. Saura, The evaluation of ainticorrosive automotive epoxy coatings by means of electrochemical impedance spectroscopy, Progress in Organic Coatings, pp.121-129, 2003.

C. Liu, Q. Bi, A. Leyland, and A. Matthews, An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part I. Establishment of equivalent circuits for EIS data modelling, Corrosion Science, vol.45, issue.6, pp.1243-1256, 2003.
DOI : 10.1016/S0010-938X(02)00213-5

U. Rammelt and G. Reinhard, Impedance analysis of conversion layers on iron, Electrochimica Acta, vol.40, issue.4, pp.505-511, 1995.
DOI : 10.1016/0013-4686(94)00320-Z

I. M. Zin, S. B. Lyon, and A. Hussain, Under-film corrosion of epoxy-coated galvanised steel An EIS and SVET study of the effect of inhibition at defects, Progress in Organic Coatings, pp.126-135, 2005.

J. N. Murray, Electrochemical test methods for evaluating organic coatings on metals: an update. Part III: Multiple test parameter measurements, Progress in Organic Coatings, vol.31, issue.4, pp.375-391, 1997.
DOI : 10.1016/S0300-9440(97)00099-4

M. Brogly, M. Nardin, and J. Schultz, Evidence of Acid-Base Interfacial Adducts in Various Polymer/Metal Systems by IRAS: Improvement of Adhesion, The Journal of Adhesion, vol.315, issue.3-4, pp.263-279, 1996.
DOI : 10.1163/156856190X00289

M. Gettings and A. J. Kinloch, Surface characterization and adhesive bonding of stainless steels: II?The Steel/Adhesive Interface, Surface and Interface Analysis, vol.45, issue.6, pp.189-195, 1979.
DOI : 10.1002/sia.740010605

G. Lothongkum, S. Chaikittisilp, and A. W. Lothongkum, XPS investigation of surface films on high Cr-Ni ferritic and austenitic stainless steels, Applied Surface Science, vol.218, issue.1-4, pp.202-209, 2003.
DOI : 10.1016/S0169-4332(03)00600-7

F. Gaillard and M. Romand, Surface characterization of AISI 304L stainless steel subjected to various prebonding treatments. Correlation with adhesion measurements, Surface and Interface Analysis, vol.6, issue.9, pp.491-496, 1988.
DOI : 10.1002/sia.740120904

M. Mantel and J. P. Wightman, Influence of the surface chemistry on the wettability of stainless steel, Surface and Interface Analysis, vol.58, issue.9, pp.595-605, 1994.
DOI : 10.1002/sia.740210902

H. M. Pollock and A. Hammiche, Micro-thermal analysis: techniques and applications, Journal of Physics D: Applied Physics, vol.34, issue.9, pp.23-53, 2001.
DOI : 10.1088/0022-3727/34/9/201

J. Bouchet, Influence des propriétés d'interphase sur le comportement aux chocs d'éléments structuraux multi-matériaux époxy-aluminium: cas des absorbeurs d'énergie, 2000.

A. Leng, H. Streckel, and M. Stratmanne, The delamination of polymeric coatings from steel. Part 1: Calibration of the Kelvinprobe and basic delamination mechanism, Corrosion Science, vol.41, issue.3, pp.547-578, 1998.
DOI : 10.1016/S0010-938X(98)00166-8

P. Scafidi and M. Ignat, Cracking and loss of adhesion of Si3N4 and SiO2:P films deposited on Al substrates, Journal of Adhesion Science and Technology, vol.15, issue.11, pp.1219-1242, 1998.
DOI : 10.1163/156856198X00407

M. Benabdi, J. Bouchet, A. A. Roche, and P. Hamelin, Thèse de l'Université Claude Bernard Lyon 1: Villeurbanne. 177 p. 12 Internal stresses, Young's modulus and practical adhesion of organic coatings applied onto 5754 aluminium alloy. Thin Solid Films Mechanical and chemical properties of organic coatings applied to metallic sheet substrates, Thin Solid Films, vol.355356, issue.342, pp.270-276, 1998.

M. Benabdi and A. A. Roche, Mechanical properties of thin and thick coatings applied to various substrates. Part I. An elastic analysis of residual stresses within coating materials, Journal of Adhesion Science and Technology, vol.250, issue.2, pp.281-299, 1997.
DOI : 10.1163/156856197X00363

I. Strawbridge, P. F. James-16, B. G. Landau, and . Levich, The factors affecting the thickness of sol-gel derived silica coatings prepared by dipping Journal of Non-Crystalline Solids Dragging of a Liquid by a Moving Plate Dip coating assisted polylactic acid deposition on steel surface: Film thickness affected by drag force and gravity, The Physic and Chemistry of Sol-Gel Processing, pp.381-393, 1942.

P. Sachin, S. Khedkar, and . Radhakrishnan, Application of dip-coating process for depositing conducting polypyrrole films, Thin Solid Films, vol.303, pp.167-172, 1997.

P. Yimsiri, M. R. Mackley, N. Barati, M. A. Sani, H. Ghasemi et al., Spin and dip coating of light-emitting polymer solutions: Matching experiment with modelling Preparation of uniform TiO2 nanostructure film on 316L stainless steel by sol?gel dip coating The modification of epoxy/metal interphases by adsorbed contaminants, Chemical Engineering Science Applied Surface Science The Journal of Adhesion, vol.61, issue.36, pp.3496-3505, 1992.

H. Kollek, Some aspects of chemistry in adhesion on anodized aluminium, International Journal of Adhesion and Adhesives, vol.5, issue.2, pp.75-80, 1985.
DOI : 10.1016/0143-7496(85)90019-3

M. Aufray, Thèse de l'INSA de Lyon: Villeurbanne. 183 p. 27. S. Bentadjine, Mécanismes de formation et propriétés physico-chimiques et mécaniques des interfaces époxy-diamine/métal Thèse de l'INSA de Lyon: Villeurbanne. 150 p. 28. S. Popineau, Durabilité en milieu humide d'assemblages structuraux collés type aluminium/composite Microstructure et perméabilité de revêtements anticorrosion : influence des contraintes hygrothermiques et rôle des interphases, pp.6001-6008, 2000.

C. Merlatti, F. X. Merlatti, E. Perrin, A. Aragon, and . Margaillan, Natural and artificial weathering characteristics of stabilized acrylic???urethane paints, Etude de la dégradation de matrices organiques et des interfaces dans des systèmes de peinture, pp.896-903, 2001.
DOI : 10.1016/j.polymdegradstab.2008.02.008

M. Irigoyen, E. Aragon, F. X. Perrin, and J. L. Vernet, Effect of UV aging on electrochemical behavior of an anticorrosion paint, Progress in Organic Coatings, vol.59, issue.3, pp.259-264, 2007.
DOI : 10.1016/j.porgcoat.2006.03.008

D. Y. Perera and D. V. Eynde, Moisture and temperature induced stresses (hygrothermal stresses) in organic coatings, Dynamic Mechanical Analysis of Epoxy Composites Plasticized by Water: Artifact and Reality. Polymer Composites, pp.55-63, 1987.

P. Bonniau, A. R. Bunsell-39, R. E. Fuller, J. D. Fornes, and . Memory, A Comparative Study of Water Absorption Theories Applied to Glass Epoxy Composites NMR study of water absorbed by epoxy resin Moisture absorption and hygrothermal aging in a bismaleimide resin, Journal of Composite Materials Journal of Applied Polymer Science Polymer, vol.15, issue.4217, pp.272-293, 1979.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.
DOI : 10.1016/S0032-3861(98)00790-3

M. B. Heman, Contribution à l'étude des interphases et de leur conportement au vieillissement hygrothermique dans les systèmes à matrice thermodurcissable renforcés de fibres de verre Hygrothermal Effects on Dynamic Mechanical Analysis and Fracture Behavior of Polymeric Composites, Materials Research, vol.8, issue.3, pp.335-340, 2005.

I. Chapitre, Suivis de l'évolution des phénomènes à l'interface métallique avec le vieillissement : mesures de SIE et caractérisations de l'adhérence du revêtement Références

I. Sekine, Recent evaluation of corrosion protective paint films by electrochemical methods, Progress in Organic Coatings, pp.73-80, 1997.
DOI : 10.1016/S0300-9440(97)00020-9

E. P. Van-westing, Determination of coating performance with impedance measurements, TNO Centre for Coatings Research Delft, 1992.

D. Loveday, P. Peterson, and B. Rodgers, Evaluation of Organic Coatings with Electrochemical Impedance spectroscopy:Part 3: Protocols for testing Coatings with EIS, Journal of Coatings Technology (JCT Coatings Tech), pp.22-27, 2005.

L. V. Philippe, G. W. Walter, and S. B. Lyon, Investigating Localized Degradation of Organic Coatings, Journal of The Electrochemical Society, vol.150, issue.4, pp.111-119, 2003.
DOI : 10.1149/1.1554913

J. M. Hu, J. T. Zhang, J. Q. Zhang, and C. N. Cao, Corrosion electrochemical characteristics of red iron oxide pigmented epoxy coatings on aluminum alloys, Corrosion Science, vol.47, issue.11, pp.2607-2618, 2005.
DOI : 10.1016/j.corsci.2004.11.009

J. T. Zhang, J. M. Hu, J. Q. Zhang, C. N. Cao, S. Skale et al., Studies of impedance models and water transport behaviors of polypropylene coated metals in NaCl solution, Progress in Organic Coatings. 13. S. Skale, V. Dolec?ek, M. Slemnik, Substitution of the constant phase element by Warburg impedance for protective coatings, pp.293-301, 2004.
DOI : 10.1016/S0300-9440(03)00115-2

E. Potvin, L. Brossard, G. Larochelle, L. Fedrizzi, F. Deflorian et al., Corrosion protective performances of commercial low-VOC epoxy/urethane coatings on hot-rolled 1010 mild steel, Progress in Organic Coatings, pp.363-373, 1995.
DOI : 10.1016/S0300-9440(97)00095-7

I. D. Chapitre, J. H. Koleva, K. De-wit, L. P. Van-breugel, E. Veleva et al., vieillissement : mesures de SIE et caractérisations de l'adhérence du revêtement 17 Correlation of microstructure, electrical properties and electrochemical phenomena in renforced mortar. Breakdown to multi-phase interface structure. PartII: Pore network, electrical properties and electrochemical response(III) complexes of macrocyclic-bidentate type as a new group of corrosion inhibitors for iron in perchloric acid Corrosion protection of iron by a,x-diphosphonic acid layers, Materials characterization Corrosion Science Corrosion Science, vol.59, issue.47, pp.801-815, 2005.

J. B. Jorcin, M. E. Orazem, B. Nadinep´ebère, and . Tribollet, CPE analysis by local electrochemical impedance spectroscopy, Electrochimica Acta, vol.51, issue.8-9, pp.1473-1479, 2006.
DOI : 10.1016/j.electacta.2005.02.128
URL : https://hal.archives-ouvertes.fr/hal-00476972

G. W. Walter, Application of impedance measurements to study performance of painted metals in aggressive solutions, Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, vol.118, pp.259-273, 1981.
DOI : 10.1016/S0022-0728(81)80546-3

B. Fastrup and A. Saarnak, AC impedance of painted and scribed steel panels under atmospheric exposure, Progress in Organic Coatings, pp.277-290, 1988.
DOI : 10.1016/0033-0655(88)80021-9

M. Kendig, F. Mansfeld, and S. Tsai, Determination of the long term corrosion behavior of coated steel with A.C. impedance measurements, Progress in Organic Coatings, pp.317-329, 1983.
DOI : 10.1016/0010-938X(83)90064-1

M. Kendig and H. Leidheiser, The electrical properties of protective polymer coatings as related to corrosion of the substrate Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings, Journal of The Electrochemical Society Journal of Applied Electrochemistry, vol.123, issue.253, pp.187-202, 1976.

O. Ferraz, E. Cavalcanti, A. R. Di, and . Sarli, The chracterization of protective properties for some naval steel/polimeric coating/ 3% NaCl solution systems by EIS and visual assessment The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films?I. Attached films, Corrosion Science Corrosion Science, vol.37, issue.3210, pp.1059-1084, 1991.

M. D. Maksimovi?, V. B. Mi?kovi?-stankovi?-30, H. Touhsaent, . D. Leidheiser-jr, M. J. Drazic et al., The corrosion behaviour of epoxy-resin electrocoated steel, Electrolyte penetration through epoxy coatings electrodeposited on steel. Corrosion Science, pp.271-279, 1972.
DOI : 10.1016/0010-938X(92)90151-R

J. M. Hu, J. Q. Zhang, and C. N. Cao, Determination of water uptake and diffusion of Clion in epoxy primer on aluminium alloys in NaCl solution by electrochemical impedance spectroscopy Resistance to corrosion of galvanized steel covered with an epoxy-polyamide primer coating, Progress in Organic Coatings, pp.1-7, 2001.

I. Chapitre, Suivis de l'évolution des phénomènes à l'interface métallique avec le vieillissement : mesures de SIE et caractérisations de l'adhérence du revêtement 34 Evaluation of the corrosion performance of zinc-phosphated painted carbon steel, Surface and Coatings Technology, vol.113, pp.36-43, 1999.

K. Saravanan, S. Sathiyanarayanan, S. Muralidharan, S. Syed-azim, and G. Venkatachari, Performance evaluation of polyaniline pigmented epoxy coating for corrosion protection of steel in concrete environment, Progress in Organic Coatings, pp.160-167, 2007.
DOI : 10.1016/j.porgcoat.2007.03.002

L. F. Vesga, E. Vera, J. H. Panqueva-38, M. A. Popov, and R. E. White, Use of the electrochemical impedance spectroscopy to evaluate the performance of a primer applied under different surface preparation methods, Progress in Organic Coatings, vol.39, issue.1, pp.61-65, 1993.
DOI : 10.1016/S0300-9440(00)00100-4

Z. Kolek, Characterization of water penetration inside organic coatings by capacitance measurements, Progress in Organic Coatings, vol.30, issue.4, pp.287-292, 1997.
DOI : 10.1016/S0300-9440(97)00006-4

W. G. Ji, J. M. Hu, L. Liu, J. Q. Zhang, C. N. Cao et al., Improving the corrosion performance of epoxy coatings by chemical modification with silane monomers. Surface & Coatings Technology Characterisation of water-based coatings by electrochemical impedance spectroscopy Microstructure et perméabilité de revêtements anticorrosion : influence des contraintes hygrothermiques et rôle des interphases Evaluation of the protective properties of organic coatings on copper pipes for refrigerator cooling circuit An impedance spectroscopy study of the degradation mechanism for a model epoxy coating on mild steel A review of impedance plot methods used for corrosion performance analysis of painted metals, Progress in Organic Coatings, pp.4789-4795, 1986.

G. W. Walter-49, J. D. Armstrong, F. Wright, L. Deflorian, P. L. Fedrizzi et al., The application of impedance spectroscopy to study the uptake of sodium chloride solution in painted metals, Corrosion Science, vol.32, issue.10, pp.1041-1058, 1991.
DOI : 10.1016/0010-938X(91)90093-5

I. Chapitre, L. Deflorian, and . Fedrizzi, mesures de SIE et caractérisations de l'adhérence du revêtement 51 Adhesion characterization of protective organic coatings by electrochemical impedance spectroscopy): p. 629-645. 52. A. Amirudin and D. Thierry, Application of electrochemical impedance spectroscopy to study efficiency of anticorrosive pigments in epoxy-polyamide resin Analysis of electrochemical impedance and noise data for polymer coated metal Comparative electrochemical studies of zinc chromate and zinc phosphate as corrosion inhibitors for zinc, Progress in Organic Coatings, pp.128-134, 1995.

M. Hernandez, J. Genesca, J. Uruchurtu, F. Galliano, D. Landolt-tang et al., Effect of an inhibitive pigment zinc-aluminum-phosphate (ZAP) on the corrosion mechanisms of steel in waterborne coatings, Progress in Organic Coatings, pp.199-206, 1997.
DOI : 10.1016/j.porgcoat.2006.05.001

P. Campestrini, E. P. Van-westing, and J. H. De-wit, Influence of surface preparation on performance of chromate conversion coating on Alcad 2024 aluminium alloy Measurement of the practical adhesion of paint coatings to metallic sheets by the pull-off and three-point flexure tests, Electrochemica Acta Journal of Adhesion Science and Technology, vol.46, issue.86, pp.2631-2647, 1994.

M. K. Harun, J. Marsh, and S. B. Lyon, The effect of surface modification on the cathodic disbondment rate of epoxy and alkyd coatings Adhesive strength of powder coated aluminium substrates, Progress in Organic Coatings, pp.317-321, 2005.

Z. W. Wicks-jr, Corrosion Protection by Coatings Mécanismes de formation et propriétés physico-chimiques et mécaniques des interfaces époxy-diamine/métal Thèse de l'INSA de Lyon: Villeurbanne. 150 p. 65. M. Aufray, Caractérisation physico-chimique des interphases époxy-amine/oxydes ou hydroxyde métallique, et de leurs constituants The durability of adhesive joints in the presence of water Adhesive Failure of Epoxy-Titanium Bonds in Aqueous Environments, Thèse de l'INSA de Lyon: Villeurbanne. 183 p. 66. M.R. Bowditch, pp.73-79, 1980.

J. W. Holubka, W. Chun, W. K. Loh, A. D. Crocombe, M. M. Wahab et al., The effect of moisture on the failure locus and fracture energy of an epoxy??steel interface Durabilité en milieu humide d'assemblages structuraux collés type aluminium/composite Etude des paramètres et des mécanismes conditionnant l'adhérence entre un primaire époxy et un substrat acier: Cas des revêtement tricouches de pipelines Adhesive bonding of fibre-reinforced composites, Adhesives, Sealants and Coatings for Space and Harsh Environment Proceedings, pp.1407-1429, 1987.

J. Klotz, W. Brostow, M. Hess, and W. S. Veeman, Epoxy and glass composites in water studied with2H-NMR, Polymer Engineering & Science, vol.176, issue.8, pp.1129-1133, 1996.
DOI : 10.1002/pen.10506

C. Carfagna, A. Apicella, and L. Nicolais, The effect of the prepolymer composition of amino-hardened epoxy resins on the water sorption behavior and plasticization Durability of steel/polymer adhesion in an aqueous environment, Journal of Applied Polymer Science International Journal of Adhesion & Adhesives, vol.27, issue.185, pp.105-112, 1982.

G. Van-assche, B. Volckaerts, and B. , Van Mele Application of micro-TA to composite materials, Presented at 2nd Int. Micro-TA Symp, pp.223-230, 2000.

R. Haessler, in Presented at Highlights of Thermal Analysis: Applications Seminar, 2000.

R. H¨aßler and E. Z. M¨uhlen, An introduction to ??TA??? and its application to the study of interfaces, Thermochimica Acta, vol.361, issue.1-2, pp.113-120, 2000.
DOI : 10.1016/S0040-6031(00)00552-9