S. S. Abdali, E. Mitsoulis, and N. C. Markatos, Entry and exit flows of Bingham fluids, Journal of Rheology, vol.36, issue.2, pp.389-407, 1992.
DOI : 10.1122/1.550350

M. J. Adams, B. J. Briscoe, and M. Kamjab, The deformhation and flow of highly concentrated dispersions, Advances in Colloid and Interface Science, vol.44, pp.143-182, 1993.
DOI : 10.1016/0001-8686(93)80023-5

M. J. Adams, B. Edmondson, D. G. Caughey, and R. Yahya, An experimental and theoretical study of the squeeze-film deformation and flow of elastoplastic fluids, Journal of Non-Newtonian Fluid Mechanics, vol.51, issue.1, pp.61-78, 1994.
DOI : 10.1016/0377-0257(94)85003-8

M. J. Adams, L. Aydin, B. J. Briscoe, and S. K. Sinha, A finite element analysis of the squeeze flow of an elasto-viscoplastic paste material, Journal of Non-Newtonian Fluid Mechanics, vol.71, issue.1-2, pp.41-57, 1997.
DOI : 10.1016/S0377-0257(96)01546-7

M. J. Adams, B. J. Briscoe, G. M. Corfield, and C. J. Lawrence, An Analysis of the Plane-Strain Compression of Viscoplastic Materials, Journal of Applied Mechanics, vol.64, issue.2, pp.420-424, 1997.
DOI : 10.1115/1.2787325

M. J. Adams, B. J. Briscoe, G. M. Corfield, and C. J. Lawrence, The wall yield of rate-dependent materials, Dynamics of Complex Fluids, pp.394-398, 1998.

M. M. Ak and S. Gunasekaran, Simulation of lubricated squeezing flow of a Herschel-Bulkley fluid under constant force, Applied Rheology, vol.10, issue.6, pp.274-279, 2000.

N. J. Alderman, G. H. Meeten, and J. D. Sherwood, Vane rheometry of bentonite gels, Journal of Non-Newtonian Fluid Mechanics, vol.39, issue.3, pp.291-310, 1991.
DOI : 10.1016/0377-0257(91)80019-G

H. A. Barnes and O. J. Carnali, The vane???in???cup as a novel rheometer geometry for shear thinning and thixotropic materials, Journal of Rheology, vol.34, issue.6, 1990.
DOI : 10.1122/1.550103

H. A. Barnes, A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure, Journal of Non-Newtonian Fluid Mechanics, vol.56, issue.3, pp.221-251, 1995.
DOI : 10.1016/0377-0257(94)01282-M

H. A. Barnes, The yield stress???a review or ????????????? ????????????everything flows?, Journal of Non-Newtonian Fluid Mechanics, vol.81, issue.1-2, pp.133-178, 1999.
DOI : 10.1016/S0377-0257(98)00094-9

H. A. Barnes and Q. D. Nguyen, Rotating vane rheometry ??? a review, Journal of Non-Newtonian Fluid Mechanics, vol.98, issue.1, pp.1-14, 2001.
DOI : 10.1016/S0377-0257(01)00095-7

A. J. Bates and J. Bridgewater, The radial flow of pastes and gels, Chemical Engineering Science, vol.55, issue.15, pp.3003-3012, 2000.
DOI : 10.1016/S0009-2509(99)00560-6

D. Bellet and J. J. Barrau, Cours d'élasticité, Cepadues Eds, 1990.

G. Brindley, J. M. Davies, and K. Walters, Elastico-viscous squeeze films. part I, Journal of Non-Newtonian Fluid Mechanics, vol.1, issue.1, pp.19-37, 1976.
DOI : 10.1016/0377-0257(76)80003-1

A. S. Burbidge and C. Servais, Squeeze flows of apparently lubricated thin films, Journal of Non-Newtonian Fluid Mechanics, vol.124, issue.1-3, pp.115-127, 2004.
DOI : 10.1016/j.jnnfm.2004.07.011

S. Carozza, C. Servais, and I. Roberts, Oscillatory vane rheometry for complex materials, Proceedings of the XIIIth International Congress on Rheology, pp.321-323, 2000.

O. H. Campanella and M. Peleg, Squeezing Flow Viscosimetry of Peanut Butter, Journal of Food Science, vol.4, issue.111, pp.180-184, 1987.
DOI : 10.1111/j.1365-2621.1987.tb14000.x

O. H. Campanella and M. Peleg, Squeezing Flow Viscometry for Nonelastic Semiliquid Foods ??? Theory and Applications, Critical Reviews in Food Science and Nutrition, vol.42, issue.3, pp.241-64, 2002.
DOI : 10.1080/10408690290825547

F. Chaari, G. Racineux, A. Poitou, and M. Chaouche, Rheological behavior of sewage sludge and strain-induced dewatering, Rheologica Acta, vol.42, pp.273-279, 2003.

T. W. Chan and D. G. Baird, An evaluation of a squeeze flow rheometer for the rheological characteriation of a filled polymer with a yield stress, Rheologica Acta, pp.41-245, 2002.

C. Sh and C. W. Macosko, Lubricated squeezing flow: A new biaxial extensional rheometer, Journal of Rheology, vol.25, issue.4, pp.433-443, 1981.

G. Couarraze and J. Grossiord, Initiation à la rhéologie, 1983.

P. Coussot and C. Ancey, Rheophysical classification of concentrated suspensions and granular pastes, Physical Review E, vol.59, issue.4, pp.4445-4457, 1999.
DOI : 10.1103/PhysRevE.59.4445

G. H. Covey, Application of the parallel-plate plastometer to brown coal rheometry, thèse Melbourne Australie, 1977.

G. H. Covey and B. R. Stanmore, Use of the parallel-plate plastometer for the characterisation of viscous fluids with a yield stress, Journal of Non-Newtonian Fluid Mechanics, vol.8, issue.3-4, pp.249-260, 1981.
DOI : 10.1016/0377-0257(81)80024-9

B. Debbaut, Non-isothermal and viscoelastic effects in the squeeze flow between infinite plates, Journal of Non-Newtonian Fluid Mechanics, vol.98, issue.1, pp.15-31, 2001.
DOI : 10.1016/S0377-0257(01)00096-9

M. M. Denn and G. Marrucci, Squeeze flow between finite plates, Journal of Non-Newtonian Fluid Mechanics, vol.87, issue.2-3, pp.175-178, 1999.
DOI : 10.1016/S0377-0257(99)00062-2

G. J. Dienes and H. F. Klemm, Theory and Application of the Parallel Plate Plastometer, Journal of Applied Physics, vol.17, issue.6, pp.458-471, 1946.
DOI : 10.1063/1.1707739

A. Doustens and M. Laquerbe, Exploitation rhéométrique du test d'écrasement entre plateaux parallèles, Journal de Mécanique Théorique et Appliquée, vol.6, issue.2, pp.315-332, 1987.

W. A. Dukes, Rheological measurement on lutings, Rheology of disperse systems, Chapitre 8, Mill CC, 1957.

G. Duvaut and J. L. Lions, Inequalities in mechanics and physics, 1976.

K. A. Ericsson, S. Toll, and J. E. Manson, The two-way interaction between anisotropic flow and fiber orientation in squeeze flow, Journal of Rheology, vol.41, issue.3, pp.491-511, 1997.
DOI : 10.1122/1.550833

P. Estellé, C. Lanos, Y. Mélinge, and C. Servais, Squeezing flow for rheological characterisation of food materials, Proceedings of the 3 rd Int. Symposium on Food Rheology and Structure, pp.115-118, 2003.

P. Estellé, C. Lanos, Y. Mélinge, and C. Servais, Le test de compression simple : mise en oeuvre sur un analyseur de texture et exploitation en présence de fluides viscoplastiques, pp.39-45, 2003.

A. Fortin, D. Côté, and P. A. Tanguy, On the imposition of friction boundary conditions for the numerical simulation of Bingham fluid flows, Computer Methods in Applied Mechanics and Engineering, vol.88, issue.1, pp.97-109, 1991.
DOI : 10.1016/0045-7825(91)90234-W

J. M. Franco, C. Gallegos, and H. A. Barnes, On slip effects in steady-state flow measurements of oil-in-water food emulsions, Journal of Food Engineering, vol.36, issue.1, pp.89-102, 1998.
DOI : 10.1016/S0260-8774(98)00055-7

D. K. Gartling and N. Phan-thien, A numerical simulation of a plastic fluid in a parallel-plate plastometer, Journal of Non-Newtonian Fluid Mechanics, vol.14, pp.347-360, 1984.
DOI : 10.1016/0377-0257(84)80053-1

A. N. Gent, Theory of the parallel plate viscometer, British Journal of Applied Physics, vol.11, issue.2, pp.85-87, 1960.
DOI : 10.1088/0508-3443/11/2/310

B. Hanayneh, Approche de l'étude rhéologique des pâtes épaisses pour l'industrie des matériaux de construction, Thèse INSA Rennes, 1983.

S. Hess and A. Sow, Squeeze-Flow in the Presence of a Temperature Gradient: Effective Attraction between Asperites in the Friction Zone of Two Solids, Journal of Non-Equilibrium Thermodynamics, vol.27, issue.2, pp.121-130, 2002.
DOI : 10.1515/JNETDY.2002.008

R. Hill, Mathematical Theory of Plasticity, 1950.

B. Hoffner, C. Gerhards, and M. Peleg, Imperfect lubricated squeezing flow viscometry for foods, Rheologica Acta, vol.41, issue.6, pp.686-693, 1997.
DOI : 10.1007/BF00367365

B. Hoffner, C. Gerhards, and M. Peleg, METHOD TO ASSESS THE ABILITY OF ROUGH SURFACES TO ELIMINATE SLIP IN FOOD VISCOMETRY, Journal of Texture Studies, vol.29, issue.5, pp.527-536, 1998.
DOI : 10.1021/i160052a007

X. Huang and D. R. Oliver, Processing properties of ceramic paste in radial flow, British Ceramic Transactions, vol.29, issue.169, pp.1-5, 1999.
DOI : 10.1016/0377-0257(94)85003-8

R. R. Huilgol, Variational principle and variational inequality for a yield stress fluid in the presence of slip, Journal of Non-Newtonian Fluid Mechanics, vol.75, issue.2-3, pp.231-251, 1998.
DOI : 10.1016/S0377-0257(97)00082-7

P. Jay, J. Piau, N. Kissi, and J. Cizeron, Numerical simulation of the transition from adhesion to slip with friction in generalized Newtonian Poiseuille flow, Journal of Non-Newtonian Fluid Mechanics, vol.77, issue.3, pp.233-251, 1998.
DOI : 10.1016/S0377-0257(97)00103-1

M. W. Johnson, Some Variational Theorems for Non-Newtonian Flow, Physics of Fluids, vol.3, issue.6, pp.871-878, 1960.
DOI : 10.1063/1.1706150

D. M. Kalyon, P. Yaras, B. Aral, and U. Yilmazer, Rheological behavior of a concentrated suspension: A solid rocket fuel simulant, Journal of Rheology, vol.37, issue.1, pp.35-53, 1993.
DOI : 10.1122/1.550435

K. Kendall, Interparticle friction in slurries, in : Tribology in Particle Technology, pp.91-103, 1987.

M. Kompani and D. C. Venerus, Equibiaxial extensional flow of polymer melts via lubricated squeezing flow. I. Experimental analysis, Rheologica Acta, vol.39, issue.5, pp.444-451, 2000.
DOI : 10.1007/s003970000106

I. Krieger, L'écoulement plastique et le rhéomètre rotatif à plateaux parallèles, Les Cahiers de Rhéologie, vol.8, issue.1, 1989.

C. Lanos, Méthode d'identification non viscosimétrique de comportements de fluides, thèse INSA Rennes, 1993.

C. Lanos and A. Doustens, Rhéométrie des écoulements entre plateaux parallèles: Réflexions, European Journal of Mechanical Engineering, vol.39, issue.2, pp.77-89, 1994.

C. Lanos, C. Casandjian, and M. Laquerbe, Reverse identification method associate to compression test, Proceedings of the XIIIth International Congress on Rheology, pp.312-314, 2000.

C. Lanos, Identification of the rheological behaviour of mineral pastes by using compression test, Proceedings of the XIIIth International Congress on Rheology, pp.415-417, 2000.

H. M. Laun, Rheometry towards complex flows: Squeeze flow technique, Makromolekulare Chemie. Macromolecular Symposia, vol.17, issue.1, pp.55-66, 1992.
DOI : 10.1002/masy.19920560107

H. M. Laun, M. Rady, and M. Hassager, Analytical solutions for squeeze flow with partial wall slip, Journal of Non-Newtonian Fluid Mechanics, vol.81, issue.1-2, pp.1-15, 1999.
DOI : 10.1016/S0377-0257(98)00083-4

C. J. Lawrence and G. M. Corfield, Non-viscometric flow of viscoplastic materials: squeeze flow, Dynamics of Complex Fluids, pp.379-393, 1998.

A. Lawal and D. M. Kalyon, Squeezing flow of viscoplastic fluids subject to wall slip, Polymer Engineering & Science, vol.7, issue.11, pp.1793-1804, 1998.
DOI : 10.1002/pen.10349

G. G. Liscomb and M. M. Denn, Flow of bingham fluids in complex geometries, Journal of Non-Newtonian Fluid Mechanics, vol.14, pp.337-346, 1984.
DOI : 10.1016/0377-0257(84)80052-X

R. Longworth and H. Morawetz, Polymer association. IV. Hydrogen bonding and melt viscosities in copolymers of styrene with methacrylic acid, Journal of Polymer Science, vol.29, issue.119, pp.307-319, 1958.
DOI : 10.1002/pol.1958.1202911922

M. A. Lorenzo, C. Gerhards, and M. Peleg, IMPERFECT SQUEEZING FLOW VISCOSIMETRY OF SELECTED TOMATO PRODUCTS, Journal of Texture Studies, vol.13, issue.5, pp.543-567, 1997.
DOI : 10.1122/1.549567

C. W. Macosko, Rheology: Principles, measurements and applications, 1994.

A. Matsoukas and E. Mitsoulis, Geometry effects in squeeze flow of Bingham plastics, Journal of Non-Newtonian Fluid Mechanics, vol.109, issue.2-3, pp.231-240, 2003.
DOI : 10.1016/S0377-0257(02)00170-2

G. H. Meeten, Yield stress of structured fluids measured by squeeze flow, Rheologica Acta, vol.39, issue.4, pp.399-408, 2000.
DOI : 10.1007/s003970000071

G. H. Meeten, Squeeze flow between plane and spherical surfaces, Rheologica Acta, vol.40, issue.3, pp.279-288, 2001.
DOI : 10.1007/s003970000134

G. H. Meeten, Constant-force squeeze flow of soft solids, Rheologica Acta, vol.41, issue.6, pp.557-566, 2002.
DOI : 10.1007/s00397-002-0241-3

G. H. Meeten, Squeeze flow of soft solids between rough surfaces, Rheologica Acta, vol.43, issue.1, pp.6-16, 2004.
DOI : 10.1007/s00397-003-0311-1

M. Mooney, Explicit Formulas for Slip and Fluidity, Journal of Rheology, vol.2, issue.2, pp.210-222, 1931.
DOI : 10.1122/1.2116364

F. Mortreuil, Développement d'une méthode d'étude d'écoulements de pâte céramique dans des filières d'extrusion de forme complexe, 1999.

S. Nasseri, L. Bilston, B. Fasheun, and R. Tanner, Modelling the biaxial elongational deformation of soft solids, Rheologica Acta, vol.43, issue.1, pp.68-79, 2004.
DOI : 10.1007/s00397-003-0321-z

Q. D. Nguyen and D. V. Boger, Yield stress measurement for concentred suspensions, Journal of Rheology, vol.27, issue.4, pp.321-349, 1983.

O. Donovan, E. J. Tanner, and R. I. , Numerical study of the Bingham squeeze film problem, Journal of Non-Newtonian Fluid Mechanics, vol.15, issue.1, pp.75-83, 1984.
DOI : 10.1016/0377-0257(84)80029-4

J. G. Oldroyd, A rational formulation of the equations of plastic flow for a Bingham solid, Mathematical Proceedings of the Cambridge Philosophical Society, vol.43, issue.01, pp.100-105, 1947.
DOI : 10.1017/S0305004100023239

D. R. Oliver and X. Huang, Squeeze film testing of ceramic pastes, British Ceramic Transactions, vol.58, issue.3, pp.101-108, 2000.
DOI : 10.1007/BF00382707

A. C. Papanastasiou, C. W. Macosko, and L. E. Scriven, Analysis of lubricated squeezing flow, International Journal for Numerical Methods in Fluids, vol.27, issue.11, pp.819-839, 1986.
DOI : 10.1002/fld.1650061105

T. C. Papanastasiou, Flows of Materials with Yield, Journal of Rheology, vol.31, issue.5, pp.385-404, 1987.
DOI : 10.1122/1.549926

J. Pastor and S. Turgeman, Limit analysis in axisymmetrical problems: Numerical determination of complete statical solutions, International Journal of Mechanical Sciences, vol.24, issue.2, pp.95-117, 1982.
DOI : 10.1016/0020-7403(82)90041-8

R. L. Peek, Parallel Plate Plastometry, Journal of Rheology, vol.3, issue.3, pp.347-372, 1932.
DOI : 10.1122/1.2116499

A. G. Petrov, The plane problem of the extrusion of a viscoplastic medium by parallel plates, Journal of Applied Mathematics and Mechanics, vol.62, issue.4, pp.565-573, 1998.
DOI : 10.1016/S0021-8928(98)00073-2

N. Phan-thien, F. Sureng, and R. I. Tanner, The squeeze-film flow of a viscoelastic fluid, Journal of Non-Newtonian Fluid Mechanics, vol.24, issue.1, pp.97-119, 1987.
DOI : 10.1016/0377-0257(87)85006-1

A. Poitou and G. Racineux, A squeezing experiment showing binder migration in concentrated suspensions, Journal of Rheology, vol.45, issue.3, pp.609-625, 2001.
DOI : 10.1122/1.1366717

URL : https://hal.archives-ouvertes.fr/hal-01004947

W. Prager, Studies in Mathematics and Mechanics, R. Von Mises Presentation Volume, pp.208-216, 1954.

O. Reynolds, On the Theory of Lubrication and Its Application to Mr. Beauchamp Tower's Experiments, Including an Experimental Determination of the Viscosity of Olive Oil, Philosophical Transactions of the Royal Society of London, vol.177, issue.0, pp.157-234, 1886.
DOI : 10.1098/rstl.1886.0005

N. Roussel, Analyse des écoulements de fluides homogènes complexes et plastiques diphasiques : application à l'essai de compression simple, 2001.

N. Roussel, C. Lanos, and Y. Mélinge, Induced heterogeneity in saturated flowing granular media, Powder Technology, vol.138, issue.1, pp.68-72, 2003.
DOI : 10.1016/j.powtec.2003.08.047

N. Roussel and C. Lanos, Plastic fluid flow parameters identification using a simple squeeze test, Applied Rheology, vol.13, issue.3, pp.132-141, 2003.

N. Roussel, C. Lanos, and Z. Toutou, Identification of Bingham fluid flow parameters using a simple squeeze test, Journal of Non-Newtonian Fluid Mechanics, vol.135, issue.1, 2004.
DOI : 10.1016/j.jnnfm.2005.12.001

J. R. Scott, Theory and Application of the Parallel-Plate Plastimeter. Part 2, Rubber Chemistry and Technology, vol.8, issue.4, pp.169-175, 1931.
DOI : 10.5254/1.3539469

J. R. Scott, Theory and Application of the Parallel-Plate Plastimeter. Part 2, Rubber Chemistry and Technology, vol.8, issue.4, pp.418-493, 1935.
DOI : 10.5254/1.3539469

C. Servais, A. Luciani, and J. E. Manson, Squeeze flow of concentrated long fibre suspensions: experiments and model, Journal of Non-Newtonian Fluid Mechanics, vol.104, issue.2-3, pp.165-184, 2002.
DOI : 10.1016/S0377-0257(02)00018-6

C. Servais, S. Ravji, C. Sansonnens, and I. Bauwens, OSCILLATING VANE GEOMETRY FOR SOFT SOLID GELS AND FOAMS, Journal of Texture Studies, vol.51, issue.6, pp.487-504, 2003.
DOI : 10.1122/1.550906

J. D. Sherwood, G. H. Meeten, C. A. Farrow, and N. J. Alderman, Squeeze-film rheometry of non-uniform mudcakes, Journal of Non-Newtonian Fluid Mechanics, vol.39, issue.3, pp.311-334, 1991.
DOI : 10.1016/0377-0257(91)80020-K

J. D. Sherwood and D. Durban, Squeeze flow of a power-law viscoplastic solid, Journal of Non-Newtonian Fluid Mechanics, vol.62, issue.1, pp.35-54, 1996.
DOI : 10.1016/0377-0257(95)01395-4

J. D. Sherwood and D. Durban, Squeeze-flow of a Herschel???Bulkley fluid, Journal of Non-Newtonian Fluid Mechanics, vol.77, issue.1-2, pp.115-121, 1998.
DOI : 10.1016/S0377-0257(97)00099-2

J. D. Sherwood, Liquid???solid relative motion during squeeze flow of pastes, Journal of Non-Newtonian Fluid Mechanics, vol.104, issue.1, pp.1-32, 2002.
DOI : 10.1016/S0377-0257(02)00011-3

J. D. Sherwood, Squeeze flow of a dry foam, Journal of Non-Newtonian Fluid Mechanics, vol.112, issue.2-3, pp.115-128, 2003.
DOI : 10.1016/S0377-0257(03)00065-X

D. N. Smyrnaios and J. A. Tsamopoulos, Squeeze flow of Bingham plastics, Journal of Non-Newtonian Fluid Mechanics, vol.100, issue.1-3, pp.165-190, 2001.
DOI : 10.1016/S0377-0257(01)00141-0

J. Stefan, Versuche über die scheinbare Adhäsion, Akademie der Wissenschaften, Mathematish-Naturwissenschaftliche Class, pp.713-735, 1874.

J. F. Steffe, Rheological methods in food process engineering, 1996.

H. S. Tang and D. M. Kalyon, Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers, Rheologica Acta, vol.43, issue.1, pp.43-80, 2004.
DOI : 10.1007/s00397-003-0322-y

R. Törnqvist, C. Servais, J. Ebinger, and J. E. Månson, The role of fiber bundle interaction forces in non-isothermal compression molding of thermoplastic composites, Polymer Composites, vol.85, issue.1, pp.1-10, 2001.
DOI : 10.1002/pc.10510

Z. Toutou, Rhéologie et formulation des géosuspensions concentrées : évaluation des conditions d'extrudabilité, Thèse INSA Rennes, 2002.

Z. Toutou, N. Roussel, and C. Lanos, The squeezing test: a tool to identify firm cement-based material's rheological behaviour and evaluate their extrusion ability, Cement and Concrete Research, vol.35, issue.10, 2004.
DOI : 10.1016/j.cemconres.2004.09.007

P. Varadan and M. J. Solomon, Direct visualization of flow-induced microstructure in dense colloidal gels by confocal laser scanning microscopy, Journal of Rheology, vol.47, issue.4, pp.943-968, 2003.
DOI : 10.1122/1.1579689

H. J. Walls, B. Caines, S. Sanchez, A. M. Khan, and S. A. , Yield stress and wall slip phenomena in colloidal silica gels, Journal of Rheology, vol.47, issue.4, pp.847-868, 2003.
DOI : 10.1122/1.1574023

S. D. Wilson, Squeezing flow of a Bingham material, Journal of Non-Newtonian Fluid Mechanics, vol.47, pp.211-219, 1993.
DOI : 10.1016/0377-0257(93)80051-C

G. Winther, K. Almdal, and O. Kramer, Determination of polymer melt viscosity by squeezing flow with constant plate velocity, Journal of Non-Newtonian Fluid Mechanics, vol.39, issue.2, pp.119-136, 1991.
DOI : 10.1016/0377-0257(91)80009-9

F. Yang, Exact solution for compressive flow of viscoplastic fluids under perfect slip wall boundary conditions, Rheologica Acta, vol.37, issue.1, pp.68-72, 1998.
DOI : 10.1007/s003970050092

U. Yilmazer and D. M. Kalyon, Slip Effects in Capillary and Parallel Disk Torsional Flows of Highly Filled Suspensions, Journal of Rheology, vol.33, issue.8, pp.1197-1212, 1989.
DOI : 10.1122/1.550049

N. Yoshioka and K. Adachi, ON VARIATIONAL PRINCIPLES FOR A NON-NEWTONIAN FLUID, Journal of Chemical Engineering of Japan, vol.4, issue.3, 1971.
DOI : 10.1252/jcej.4.217

A. Yoshimura and R. K. Prud-'homme, Wall Slip Corrections for Couette and Parallel Disk Viscometers, Journal of Rheology, vol.32, issue.1, pp.53-67, 1988.
DOI : 10.1122/1.549963

W. Zhang, N. Silvi, and J. Vlachopoulos, Modelling and Experiments of Squeezing Flow of Polymer Melts, International Polymer Processing, vol.10, issue.2, pp.155-164, 1995.
DOI : 10.3139/217.950155

K. J. Zwick, P. S. Ayyaswany, and I. M. Cohen, Variational analysis of the squeezing flow of a yield stress fluid, Journal of Non-Newtonian Fluid Mechanics, vol.63, issue.2-3, pp.179-199, 1996.
DOI : 10.1016/0377-0257(95)01423-3