K. Helmer, T. Karppinen, and B. Lindqvist, Curtain vs. blade coating: Experience in board application, Pap. Technol, vol.46, issue.6, pp.37-42, 2005.

P. Salminen, A. Yang, and J. Kritzinger, The Influence of Application System on the Structure of Coating Layer, PaperCon, Proc, 2010.

I. Endres and M. Tietz, Blade, film, and curtain coating techniques and their influence on paper surface characteristics, TAPPI J, vol.6, issue.11, pp.24-32, 2007.

S. J. Weinstein, R. , and K. J. , COATING FLOWS, Annual Review of Fluid Mechanics, vol.36, issue.1, pp.29-53, 2004.
DOI : 10.1146/annurev.fluid.36.050802.122049

P. Tripathi, M. Joyce, P. D. Fleming, and M. Sugihara, A statistical study of process variables to optimize a high speed curtain coater-Part I, TAPPI J, vol.8, issue.1, pp.20-26, 2009.

N. G. Triantafillopoulos, J. Grön, and I. Luostarinen, Operational issues in high-speed curtain coating of paper, Part 2: Curtain coating of lightweight coated paper, TAPPI J, vol.3, issue.12, pp.11-16, 2004.

T. D. Black, A. Clarke, R. , and K. J. , Hydrodynamic assist of dynamic wetting, AIChE J, vol.40, issue.2, pp.229-242, 1994.

Y. D. Shikhmurzaev, Dynamic contact angles and flow in vicinity of moving contact line, AIChE Journal, vol.42, issue.3, pp.601-612, 1996.
DOI : 10.1002/aic.690420302

P. Tripathi, M. Joyce, P. D. Fleming, and M. Sugihara, A statistical study of process variables to optimize a high speed curtain coater-Part II, TAPPI J, vol.8, issue.1, pp.29-32, 2009.

S. E. Kistler and L. E. Scriven, Finite element analysis of dynamic wetting for curtain coating at high capillary numbers, AIChE Spring Meeting, 1982.

K. Miyamoto and Y. Katagari, Premetered coating processes: Curtain coating, pp.363-395

K. N. Christodoulou, Computational physics of slide coating flow, 1990.

K. Tjiptowidjojo, Flow limits in slide coating, 2009.

E. Gutoff and E. Cohen, Problems in slot, extrusion, slide and curtain coating " in Coating and Drying Defects: troubleshooting operating problems, pp.97-142, 1995.

S. F. Kistler and P. M. Schweizer, Liquid film coating, 1997.
DOI : 10.1007/978-94-011-5342-3

S. J. Weinstein, R. , and K. J. , One-dimensional equations governing single-cavity die design, AIChE Journal, vol.42, issue.9, pp.2401-2414, 1996.
DOI : 10.1002/aic.690420902

H. H. Winter, F. , and H. G. , Design of dies for the extrusion of sheets and annular parisons: The distribution problem, Polymer Engineering and Science, vol.24, issue.8, pp.543-553, 1986.
DOI : 10.1002/pen.760260805

C. Miller, Predicting Non-Newtonian Flow Behavior in Ducts of Unusual Cross Section, Industrial & Engineering Chemistry Fundamentals, vol.11, issue.4, pp.524-528, 1972.
DOI : 10.1021/i160044a015

T. Liu, H. , and C. , The pressure drop/flow rate equation for non-Newtonian flow in channels of irregular cross-section, Polymer Engineering and Science, vol.5, issue.23, pp.1559-1564, 1988.
DOI : 10.1002/pen.760282306

M. L. Booy, A network flow analysis of extrusion dies and other flow systems, Polymer Engineering and Science, vol.88, issue.7, pp.432-437, 1982.
DOI : 10.1002/pen.760220707

Y. Matsubara, Residence time distribution of polymer melts in the linearly tapered coat-hanger die, Polymer Engineering and Science, vol.20, issue.1, pp.17-19, 1983.
DOI : 10.1002/pen.760230105

W. K. Leonard, Inertia and gravitational effects in extrusion dies for non-Newtonian fluids, Polymer Engineering and Science, vol.22, issue.9, pp.570-576, 1985.
DOI : 10.1002/pen.760250910

K. Lee and T. Liu, Design and analysis of a dual-cavity coat-hanger die, Polymer Engineering and Science, vol.26, issue.15, pp.1066-1075, 1989.
DOI : 10.1002/pen.760291513

R. B. Secor, Analysis and Design of Internal Coating Die Cavities, Liquid Film Coating (SF Kistler and PM Schweizer, pp.369-398, 1997.
DOI : 10.1007/978-94-011-5342-3_10

D. V. Boger, Viscoelastic Flows Through Contractions, Annual Review of Fluid Mechanics, vol.19, issue.1, pp.157-182, 1987.
DOI : 10.1146/annurev.fl.19.010187.001105

A. Acrivos, B. D. Babcock, and R. L. Pigford, Flow distributions in manifolds, Chemical Engineering Science, vol.10, issue.1-2, pp.112-124, 1959.
DOI : 10.1016/0009-2509(59)80030-0

K. Lee, S. Wen, and T. Liu, Vortex formation in a dual-cavity coat-hanger die, Polymer Engineering and Science, vol.20, issue.19, pp.1220-1227, 1990.
DOI : 10.1002/pen.760301906

E. P. Vrahopoulou, A model for fluid flow in dies, Chemical Engineering Science, vol.46, issue.2, pp.629-636, 1991.
DOI : 10.1016/0009-2509(91)80022-Q

J. Dooley, Simulating the flow in a film die using finite element analysis, TAPPI Polym., Laminations Coat. Conf., TAPPI PRESS, pp.957-964, 1990.

S. Y. Na, K. , and D. Y. , Three-dimensional modelling of Non-Newtonian fluid flow in a coat-hanger die, Korean Journal of Chemical Engineering, vol.26, issue.2, pp.236-243, 1995.
DOI : 10.1007/BF02705652

S. H. Wen and T. Liu, Three-dimensional finite element analysis of polymeric fluid flow in an extrusion die. Part I: Entrance effect, Polymer Engineering and Science, vol.3, issue.10, pp.827-834, 1994.
DOI : 10.1002/pen.760341008

Y. H. Chang, S. H. Wen, and T. Liu, Experimental observation on entrance flow inside extrusion dies, Polymer Engineering & Science, vol.49, issue.21, pp.2663-2675, 1996.
DOI : 10.1002/pen.10665

W. K. Leonard, Effects of secondary cavities, inertia and gravity on extrusion, pp.144-148, 1985.

S. Millet, Stabilité de l'écoulement multicouche de films non newtoniens sur un plan incliné, Institut National des Sciences Appliquées, 2007.

T. Benjamin, Wave formation in laminar flow down an inclined plane, Journal of Fluid Mechanics, vol.48, issue.06, pp.554-574, 1957.
DOI : 10.1021/ie50379a015

G. J. Debruin, Stability of a layer of liquid flowing down an inclined plane, Journal of Engineering Mathematics, vol.6, issue.3, pp.259-270, 1974.
DOI : 10.1007/BF02353368

J. M. Floryan, S. H. Davies, K. , and R. E. , Instabilities of a liquid film flowing down a slightly inclined plane, Physics of Fluids, vol.30, issue.4, pp.983-989, 1987.
DOI : 10.1063/1.866285

D. S. Loewenherz, L. , and C. J. , The effect of viscosity stratification on the stability of a free surface flow at low Reynolds number, Physics of Fluids A: Fluid Dynamics, vol.1, issue.10, pp.1686-1693, 1989.
DOI : 10.1063/1.857533

A. P. Hooper and W. G. Boyd, Shear-flow instability due to a wall and a viscosity discontinuity at the interface, Journal of Fluid Mechanics, vol.10, issue.-1, pp.201-225, 1987.
DOI : 10.1007/BF01177670

A. P. Hooper, Long-wave instability at the interface between two viscous fluids: Thin layer effects, Physics of Fluids, vol.28, issue.6, pp.1613-1618, 1985.
DOI : 10.1063/1.864952

K. P. Chen, Wave formation in the gravity???driven low???Reynolds number flow of two liquid films down an inclined plane, Physics of Fluids A: Fluid Dynamics, vol.5, issue.12, pp.3038-3048, 1993.
DOI : 10.1063/1.858714

C. K. Wang, J. J. Seaborg, L. , and S. P. , Instability of multi-layered liquid films, Physics of Fluids, vol.21, issue.10, pp.1669-1673, 1978.
DOI : 10.1063/1.862106

S. J. Weinstein and M. R. Kurz, Long???wavelength instabilities in three???layer flow down an incline, Physics of Fluids A: Fluid Dynamics, vol.3, issue.11, pp.2680-2687, 1991.
DOI : 10.1063/1.858158

S. J. Weinstein, C. , and K. P. , Large growth rate instabilities in three-layer flow down an incline in the limit of zero Reynolds number, Physics of Fluids, vol.11, issue.11, pp.11-3270, 1999.
DOI : 10.1063/1.870187

C. Hwang, J. Chen, and J. Wang, Linear stability of power law liquid film flows down an inclined plane, Journal of Physics D: Applied Physics, vol.27, issue.11, pp.27-2297, 1994.
DOI : 10.1088/0022-3727/27/11/008

F. Rousset, S. Millet, and V. Botton, Temporal Stability of Carreau Fluid Flow Down an Incline, Journal of Fluids Engineering, vol.129, issue.7, pp.913-920, 2007.
DOI : 10.1115/1.2742737
URL : https://hal.archives-ouvertes.fr/hal-00272026

S. J. Weinstein, Wave propagation in the flow of shear-thinning fluids down an incline, AIChE Journal, vol.36, issue.12, pp.1873-1889, 1990.
DOI : 10.1002/aic.690361211

S. Millet, F. Rousset, and V. Botton, Stabilit?? de l'??coulement ?? deux couches de films non-newtoniens sur un plan inclin??, Comptes Rendus M??canique, vol.336, issue.3, pp.313-319, 2008.
DOI : 10.1016/j.crme.2007.10.021

S. Millet, F. Rousset, and V. Botton, Stability analysis of stratified coating flow of shear-thinning fluids, The European Physical Journal Special Topics, vol.166, issue.1, pp.143-146, 2009.
DOI : 10.1140/epjst/e2009-00895-9
URL : https://hal.archives-ouvertes.fr/hal-00473505

N. G. Triantafillopoulos, F. Jr, and .. T. , Flash X-Ray Radiography techniques for visualizing coating flows, 1988.

N. Midoux, Mécanique et rhéologie des fluides en génie chimique, 1999.

R. P. Chhabra and J. F. Richarson, Non-Newtonian flow in the process industries: Fundamentals and engineering applications, 1999.

F. Delplace and J. C. Leuliet, Generalized Reynolds number for the flow of power law fluids in cylindrical ducts of arbitrary cross-section, The Chemical Engineering Journal and the Biochemical Engineering Journal, vol.56, issue.2, pp.33-37, 1995.
DOI : 10.1016/0923-0467(94)02849-6

P. Martinez, M. Rueff, D. Guérin, and V. Morin, Experimental and theoretical study of the manifold flow in a curtain coater, TAPPI J, vol.15, issue.11, pp.15-21, 2010.

P. Martinez, M. Rueff, D. Guérin, and V. Morin, CFD simulation and experimental study of the flow in the cavities of a slide die curtain coater, Extended abstract proceedings of the European Coating Symposium (ECS '11) Turku (Finland) -4p. -and oral presentation, 2011.

P. Martinez, M. Rueff, D. Guérin, and V. Morin, Experimental and theoretical study of the flow in the manifold of a curtain coater, Proceedings of the 2010 TAPPI Advanced Coating Fundamentals Symposium. Munich (Germany) -19p. -and oral presentation, 2010.

P. Martinez, M. Rueff, D. Guérin, and V. Morin, Study of the internal flow in a curtain coater, Récents Progrès en Génie des Procédés, number 98 Proceedings of the « XIIe congrès de la SFGP, pp.2-910239, 2009.