T. Herbell and A. Eckel, Ceramic Matrix for Rocket Engine Turbine Applications, Trans. ASME, vol.115, pp.64-69, 1993.

M. Effinger, J. Koenig, and M. Halbig, C/SiC Mechanical and Thermal Design Data for a Turbopump Blisk, Proceedings of the 21st annual Conference on Composites, Materials, and Structures, 1997.

O. Hisaichi, S. Masaki, O. Masakazu, M. Kaoru, and S. Tadashi, Potential application of ceramic matrix composites to aero-engine components, Composites: Part A, vol.30, pp.489-496, 1999.

C. Bouquet, R. Fischer, J. Larrieu, G. Uhrig, and T. J. , Composite Technologies Development Status for Scramjet Applications, 12th AIAA International Space Planes and Hypersonic Systems and Technologies, 2003.
DOI : 10.2514/6.2003-6917

M. Ortelt, H. Weihs, I. Fischer, and M. Dogigli, Thermo-Mechanical Qualification Tests of Complex CMC Re-Entry Structures, Ceramic Engineering and Science Proceedings, vol.24, pp.81-87, 2003.
DOI : 10.1002/9780470294826.ch41

W. Krenkel and F. C. Berndt, C/C???SiC composites for space applications and advanced friction systems, Materials Science and Engineering: A, vol.412, issue.1-2, pp.177-181, 2005.
DOI : 10.1016/j.msea.2005.08.204

P. Spriet and G. Habarou, Applications of CMCs to Turbojet Engines: Overview of the SEP Experience, Key Engineering Materials, vol.127, issue.131, pp.127-131, 1997.
DOI : 10.4028/www.scientific.net/KEM.127-131.1267

R. Naslain, Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview, Composites Science and Technology, vol.64, issue.2, pp.155-170, 2004.
DOI : 10.1016/S0266-3538(03)00230-6

Y. Zhang, Y. Xu, J. Lou, L. Zhang, L. Cheng et al., Braking Behavior of C/SiC Composites Prepared by Chemical Vapor Infiltration, International Journal of Applied Ceramic Technology, vol.164, issue.2, pp.114-121, 2005.
DOI : 10.1016/S0043-1648(01)00595-6

G. Folsom, F. Zok, and F. Lange, Flexural Properties of Brittle Multilayer Materials: II, Experiments, Journal of the American Ceramic Society, vol.75, issue.11, pp.2081-2087, 1994.
DOI : 10.1111/j.1151-2916.1994.tb07100.x

R. Naslain, The design of the fibre-matrix interfacial zone in ceramic matrix composites, Composites Part A: Applied Science and Manufacturing, vol.29, issue.9-10, pp.1145-1155, 1998.
DOI : 10.1016/S1359-835X(97)00128-0

X. Han, Microstructure and properties of matrix modified C/SiC composites by pyrocarbon, 2006.

T. Besmann, J. Mclaughlin, and H. Lin, Fabrication of ceramic composites: forced CVI, Journal of Nuclear Materials, vol.219, pp.31-35, 1995.
DOI : 10.1016/0022-3115(94)00395-5

T. Ishikawa and T. Chou, Stiffness and strength behavior of woven fabric composites, Journal of Materials Science, vol.71, pp.3211-3220, 1982.

T. Ishikawa and T. Chou, One-dimensional micromechanical analysis of woven fabric composites, AIAA Journal, vol.21, pp.1714-1721, 1983.

T. Ishikawa and T. Chou, In-Plane Thermal Expansion and Thermal Bending Coefficients of Fabric Composites, Journal of Composite Materials, vol.17, issue.2, pp.92-104, 1983.
DOI : 10.1177/002199838301700201

T. Ishikawa, M. Matsushima, Y. Hayashi, and T. Chou, Experimental Confirmation of the Theory of Elastic Moduli of Fabric Composites, Journal of Composite Materials, vol.2, issue.216, pp.443-458, 1985.
DOI : 10.1177/002199838501900504

T. Chou, Microstructural design of fiber composites, 1992.
DOI : 10.1017/CBO9780511600272

D. Scida, Z. Aboura, M. Benzeggagh, and E. Bocherens, A micromechanics model for 3D elasticity and failure of woven-fibre composite materials, Composites Science and Technology, vol.59, issue.4, pp.505-517, 1999.
DOI : 10.1016/S0266-3538(98)00096-7

A. Tabiei and Y. Jiang, Woven fabric composite material model with material nonlinearity for nonlinear finite element simulation, International Journal of Solids and Structures, vol.36, issue.18, pp.2757-2771, 1999.
DOI : 10.1016/S0020-7683(98)00127-9

A. Tabiei, Y. Jiang, and Y. W. , A novel micromechanics-based plain weave fabric composite constitutive model with material nonlinear behavior, AIAA Journal, vol.38, issue.5, 2000.

A. Tabiei, Y. Jiang, and J. Simitses, Micromechanics-based plain weave fabric composites References 128

R. Tanov and A. Tabiei, Computationally Efficient Micromechanical Models for Woven Fabric Composite Elastic Moduli, Journal of Applied Mechanics, vol.68, issue.4, pp.553-560, 2001.
DOI : 10.1115/1.1357516

A. Tabiei and W. Yi, Comparative study of predictive methods for woven fabric composite elastic properties, Composite Structures, vol.58, issue.1, pp.149-164, 2002.
DOI : 10.1016/S0263-8223(02)00028-4

J. Yang, C. Ma, and T. Chou, Fiber Inclination Model of Three-Dimensional Textile Structural Composites, Journal of Composite Materials, vol.20, issue.5, pp.472-484, 1986.
DOI : 10.1177/002199838602000505

H. Sun and X. Qiao, Prediction of the mechanical properties of three-dimensionally braided composites, Composites Science and Technology, vol.57, issue.6, pp.623-629, 1997.
DOI : 10.1016/S0266-3538(96)00154-6

D. Whyte, On the structure and properties of 3-D braid reinforced composites, 1986.

S. Kalidindi and A. Abusafieh, Longitudinal and Transverse Moduli and Strengths of Low Angle 3-D Braided Composites, Journal of Composite Materials, vol.30, issue.8, pp.885-905, 1996.
DOI : 10.1177/002199839603000802

S. Kalidindi and E. Franco, Numerical evaluation of isostrain and weighted-average models for elastic moduli of three-dimensional composites, Composites Science and Technology, vol.57, issue.3, pp.293-305, 1997.
DOI : 10.1016/S0266-3538(96)00119-4

Y. Zhang and J. Harding, A numerical micromechanics analysis of the mechanical properties of a plain weave composite, Computers & Structures, vol.36, issue.5, pp.839-844, 1990.
DOI : 10.1016/0045-7949(90)90154-T

Z. Tang and R. Postle, Mechanics of three-dimensional braided structures for composite materials ??? Part II: prediction of the elastic moduli, Composite Structures, vol.51, issue.4, pp.451-457, 2001.
DOI : 10.1016/S0263-8223(00)00160-4

Z. Tang and R. Postle, Mechanics of three-dimensional braided structures for composite materials ??? part III: nonlinear finite element deformation analysis, Composite Structures, vol.55, issue.3, pp.307-317, 2002.
DOI : 10.1016/S0263-8223(01)00155-6

X. Tang, J. Whitcomb, A. Kelkar, and J. Tate, Progressive failure analysis of 2??2 braided composites exhibiting multiscale heterogeneity, Composites Science and Technology, vol.66, issue.14, pp.2580-2590, 2006.
DOI : 10.1016/j.compscitech.2006.01.026

K. Xu and X. Xu, Finite element analysis of mechanical properties of 3D five-directional braided composites, Materials Science and Engineering: A, vol.487, issue.1-2, pp.499-509, 2008.
DOI : 10.1016/j.msea.2007.10.030

G. Fang, J. Liang, and B. Wang, Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension, Composite Structures, vol.89, pp.126-133, 2009.

J. Whitcomb, K. Srirengan, and C. Chapman, Evaluation of homogenization for global/local stress analysis of textile composites, Composite Structures, vol.31, issue.2, pp.137-149, 1995.
DOI : 10.1016/0263-8223(95)00011-9

K. Srirengan, J. Whitcomb, and C. Chapman, Modal technique for three-dimensional global/ local stress analysis of plain weave composites, Composite Structures, vol.39, issue.1-2, pp.145-156, 1997.
DOI : 10.1016/S0263-8223(97)00134-7

B. Hassani and E. Hinton, A review of homogenization and topology optimization

P. Chung, K. Tamma, and R. Namburu, A micro/macro homogenization approach for viscoelastic creep analysis with dissipative correctors for heterogeneous woven-fabric layered media, Composites Science and Technology, vol.60, issue.12-13, pp.2233-2253, 2000.
DOI : 10.1016/S0266-3538(00)00018-X

P. Chung, K. Tamma, and R. Namburu, Asymptotic expansion homogenization for heterogeneous media: computational issues and applications, Composites Part A: Applied Science and Manufacturing, vol.32, issue.9, pp.1291-1301, 2001.
DOI : 10.1016/S1359-835X(01)00100-2

A. Dasgupta, R. Agarwal, and S. Bhandarkar, Three-dimensional modeling of woven-fabric composites for effective thermo-mechanical and thermal properties, Composites Science and Technology, vol.56, issue.3, pp.209-223, 1996.
DOI : 10.1016/0266-3538(95)00111-5

V. Carvelli and C. Poggi, A homogenization procedure for the numerical analysis of woven fabric composites, Composites Part A: Applied Science and Manufacturing, vol.32, issue.10, pp.1425-1432, 2001.
DOI : 10.1016/S1359-835X(01)00041-0

M. Feng and C. Wu, A study of three-dimensional four-step braided piezo-ceramic composites by the homogenization method, Composites Science and Technology, vol.61, issue.13, pp.1889-1898, 2001.
DOI : 10.1016/S0266-3538(01)00090-2

J. Dong and M. Feng, Asymptotic expansion homogenization for simulating progressive damage of 3D braided composites, Composite Structures, vol.92, issue.4, pp.873-882, 2010.
DOI : 10.1016/j.compstruct.2009.09.026

G. Camus, L. Guillaumat, and S. Baste, Development of damage in a 2D woven C/SiC composite under mechanical loading: I. Mechanical characterization, Composites Science and Technology, vol.56, issue.12, pp.1363-1372, 1996.
DOI : 10.1016/S0266-3538(96)00094-2

R. Bouazzaoui, S. Baste, and G. Camus, Development of damage in a 2D woven C/SiC composite under mechanical loading: II. Ultrasonic characterization, Composites Science and Technology, vol.56, issue.12, pp.1373-1382, 1996.
DOI : 10.1016/S0266-3538(96)90008-1

E. Inghels and J. Lamon, An approach to the mechanical behavior of C/SiC and SiC/SiC ceramic matrix composites, part 1 experimental results, Journal of Material Science, vol.20, pp.5403-5410, 1991.

E. Inghels and J. Lamon, An approach to the mechanical behavior of C/SiC and SiC/SiC ceramic matrix composites, part 2 theoretical approach, Journal of Material Science, vol.20, pp.5411-5419, 1991.

Y. Wang, L. Zhang, L. Cheng, H. Mei, and J. Ma, Characterization of tensile behavior of a two-dimensional woven carbon/silicon carbide composite fabricated by chemical vapor infiltration, Materials Science and Engineering: A, vol.497, issue.1-2, pp.295-300, 2008.
DOI : 10.1016/j.msea.2008.07.050

G. Ji, S. Qiao, S. Du, D. Han, and M. Li, Three-point bending fracture characteristics of three-dimensional-C/SiC with single-edge notch beam specimens, Materials Science and Engineering: A, vol.483, issue.484, pp.483-484, 2008.
DOI : 10.1016/j.msea.2006.09.187

L. Cheng, Y. Xu, L. Zhang, and Q. Zhang, Effect of heat treatment on the thermal expansion of 2D and 3D C/SiC composites from room temperature to 1400 ??C, Carbon, vol.41, issue.8, pp.1666-1670, 2003.
DOI : 10.1016/S0008-6223(03)00125-8

Q. Zhang, L. Cheng, L. Zhang, and Y. Xu, Thermal expansion behavior of carbon fiber reinforced chemical-vapor-infiltrated silicon carbide composites from room temperature to 1400????C, Materials Letters, vol.60, issue.27, pp.3245-3247, 2006.
DOI : 10.1016/j.matlet.2006.02.088

S. Kumar, A. Kumar, A. Shukla, R. Devi, G. Gupta et al., Investigation of thermal expansion of 3D-stitched C???SiC composites, Journal of the European Ceramic Society, vol.29, issue.13, pp.2849-2855, 2009.
DOI : 10.1016/j.jeurceramsoc.2009.04.005

M. Sheikh, S. Taylor, D. Hayhurst, and R. Taylor, Microstructural finite-element modelling of a ceramic matrix composite to predict experimental measurements of its macro thermal properties, Modelling and Simulation in Materials Science and Engineering, vol.9, issue.1, pp.7-23, 2001.
DOI : 10.1088/0965-0393/9/1/302

J. Farooqi and M. Sheikh, Finite element modelling of thermal transport in ceramic matrix composites, Computational Materials Science, vol.37, issue.3, pp.361-373, 2006.
DOI : 10.1016/j.commatsci.2005.11.001

F. Lamouroux, X. Bourrat, R. Nasalain, and J. Sevely, Structure/oxidation behavior relationship in the carbonaceous constituents of 2D-C/PyC/SiC composites, Carbon, vol.31, issue.8, pp.1273-1288, 1993.
DOI : 10.1016/0008-6223(93)90086-P

L. Cheng, Y. Xu, L. Zhang, and X. Yin, Effect of carbon interlayer on oxidation behavior of C/SiC composites with a coating from room temperature to 1500??C, Materials Science and Engineering: A, vol.300, issue.1-2, pp.219-225, 2001.
DOI : 10.1016/S0921-5093(00)01405-2

X. Yin, L. Cheng, L. Zhang, Y. Xu, and J. Li, Oxidation behavior of 3D C/SiC composites in two oxidizing environments, Composites Science and Technology, vol.61, issue.7, pp.977-980, 2001.
DOI : 10.1016/S0266-3538(00)00190-1

F. Lamouroux and G. Camus, Kinetics and Mechanisms of Oxidation of 2D Woven C/SiC Composites: I, Experimental Approach, Journal of the American Ceramic Society, vol.137, issue.9, pp.2049-2057, 1994.
DOI : 10.1111/j.1151-2916.1994.tb07096.x

F. Lamouroux, R. Naslain, and J. Jouin, Kinetics and Mechanisms of Oxidation of 2D Woven C/SiC Composites: II, Theoretical Approach, Journal of the American Ceramic Society, vol.28, issue.5, pp.2058-2068, 1994.
DOI : 10.1111/j.1151-2916.1994.tb07097.x

R. Naslain, A. Guette, F. Rebillat, L. Gallet, S. Lamouroux et al., Oxidation mechanisms and kinetics of SiC-matrix composites and their constituents, Journal of Materials Science, vol.39, issue.24, pp.7303-7316, 2004.
DOI : 10.1023/B:JMSC.0000048745.18938.d5

S. Singh and V. Srivastava, Effect of oxidation on elastic modulus of C/C???SiC composites, Materials Science and Engineering: A, vol.486, issue.1-2, pp.534-539, 2008.
DOI : 10.1016/j.msea.2007.09.078

M. Halbig and A. Eckel, Oxidation of continuous carbon fibers within a silicon carbide matrix under stressed and unstressed conditions, 2000.

M. Halbig, J. Mcguffin-cawley, A. Eckel, and D. Brewer, Oxidation Kinetics and Stress Effects for the Oxidation of Continuous Carbon Fibers within a Microcracked C/SiC Ceramic Matrix Composite, Journal of the American Ceramic Society, vol.93, issue.6, pp.519-526, 2008.
DOI : 10.1016/0008-6223(89)90073-0

W. Zhang, H. Cheng, T. Xie, Z. Shen, B. Zhou et al., Oxidation kinetics and mechanisms of ceramic-carbon composites I. Modeling for the nonreactive ceramic layer type, Carbon, vol.36, issue.7-8, pp.991-995, 1998.
DOI : 10.1016/S0008-6223(97)00231-5

A. Eckel, J. Cawley, and T. Parthasarathy, Oxidation Kinetics of a Continuous Carbon Phase in a Nonreactive Matrix, Journal of the American Ceramic Society, vol.5, issue.10, pp.972-80, 1995.
DOI : 10.1111/j.1151-2916.1986.tb07470.x

M. Halbig and A. Eckel, Modelling the environmental effects on carbon fibers in a ceramic matrix at oxidizing conditions, NASA/TM, 2000.

M. Halbig and J. Cawley, Modeling the Oxidation Kinetics of Continuous Carbon Fibers in a Ceramic Matrix, NASA/TM, 2000.
DOI : 10.1002/9780470294574.ch11

R. Sullivan, A model for the oxidation of carbon silicon carbide composite structures, Carbon, vol.43, issue.2, pp.275-285, 2005.
DOI : 10.1016/j.carbon.2004.09.010

J. Lachaud, N. Bertrand, G. Vignoles, G. Bourget, F. Rebillat et al., A theoretical/experimental approach to the intrinsic oxidation reactivities of C/C composites and of their components, Carbon, vol.45, issue.14, pp.2768-2776, 2007.
DOI : 10.1016/j.carbon.2007.09.034
URL : https://hal.archives-ouvertes.fr/hal-00407507

J. Lachaud, Y. Aspa, and G. L. Vignoles, Analytical modeling of the steady state ablation of a 3D C/C composite, International Journal of Heat and Mass Transfer, vol.51, issue.9-10, pp.2614-2627, 2008.
DOI : 10.1016/j.ijheatmasstransfer.2008.01.008
URL : https://hal.archives-ouvertes.fr/hal-00407509

G. Vignoles, J. Lachaud, Y. Aspa, and J. Goyhénèche, Ablation of carbon-based materials: Multiscale roughness modelling, Composites Science and Technology, vol.69, issue.9, pp.1470-1477, 2009.
DOI : 10.1016/j.compscitech.2008.09.019
URL : https://hal.archives-ouvertes.fr/hal-00410361

C. Sun and J. Chen, A Simple Flow Rule for Characterizing Nonlinear Behavior of Fiber Composites, Journal of Composite Materials, vol.23, issue.10, pp.1009-1020, 1989.
DOI : 10.1177/002199838902301004

J. Aboudi, Micromechanical Analysis of Composites by the Method of Cells, Applied Mechanics Reviews, vol.42, issue.7, pp.193-221, 1989.
DOI : 10.1115/1.3152428

S. Nemat-nasser and M. Hori, Micromechanics: Overall Properties of Heterogeneous Materials, Journal of Applied Mechanics, vol.63, issue.2, 1993.
DOI : 10.1115/1.2788912

S. Kim and E. Shim, A Thermoviscoplastic Theory for Composite Materials by Using a Matrix???Partitioned Unmixing-Mixing Scheme, Journal of Composite Materials, vol.114, issue.5, pp.1647-1699, 1996.
DOI : 10.1177/002199839603001502

X. Yu and J. Cui, A two-scale method for identifying mechanical parameters of composite materials with periodic configuration, Acta Mechanica Sinica, vol.22, pp.581-594, 2006.

Z. Haktan-karadeniz and D. Kumlutas, A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials, Composite Structures, vol.78, issue.1, pp.1-10, 2007.
DOI : 10.1016/j.compstruct.2005.11.034

P. Dupel, F. Langlais, and R. Pailler, Pulse chemical vapour deposition and infiltration of pyrocarbon in model pores with rectangular cross-sections, Journal of Materials Science, vol.28, issue.5, pp.1341-1347, 1994.
DOI : 10.1007/BF00975086

W. Krenkel, Microstructure Tailoring of C/C-Sic Composites, Ceramic Engineering and Science Proceedings, vol.24, pp.471-476, 2003.
DOI : 10.1002/9780470294826.ch68

Y. Wang and A. Wang, On the topological yarn structure of 3-D rectangular and tubular braided performs, Composites Science and Technology, vol.514, pp.575-586, 1994.

Y. Wang and A. Wang, Microstructure/property relationships in three-dimensionally braided fiber composites, Composites Science and Technology, vol.53, issue.2, pp.213-222, 1995.
DOI : 10.1016/0266-3538(95)00021-6

R. Pandey and H. Hahn, Designing with 4-step braided fabric composites, Composites Science and Technology, vol.56, issue.6, pp.623-634, 1996.
DOI : 10.1016/0266-3538(96)00042-5

L. Chen, X. Tao, and C. Choy, RETRACTED: On the microstructure of three-dimensional braided preforms, Composites Science and Technology, vol.59, issue.3, pp.391-404, 1999.
DOI : 10.1016/S0266-3538(98)00079-7

Z. Tang and R. Postle, Mechanics of three-dimensional braided structures for composite materials ??? part I: fabric structure and fibre volume fraction, Composite Structures, vol.49, issue.4, pp.451-459, 2000.
DOI : 10.1016/S0263-8223(00)00082-9

X. Han, Microstructure and properties of matrix modified C/SiC composites by pyrocarbon, 2006.

J. Ransom and N. Knight, Global/local stress analysis of composite panels, Computers & Structures, vol.37, issue.4, pp.375-395, 1990.
DOI : 10.1016/0045-7949(90)90027-Y

J. Luo and C. Sun, Global-local methods for thermo-elastic stress analysis of thick fiber-wound cylinders, Journal of Composite Materials, vol.25, pp.453-468, 1991.

S. Srinivasan, S. Biggers, and R. Latour, Analysis of composite structures using the 3-D global/3-D local method, Journal of Reinforced Plastics and Composites, vol.16, pp.353-371, 1997.

P. Vandeurzen, J. Ivens, and I. Verpoest, Micro-Stress Analysis of Woven Fabric Composites by Multilevel Decomposition, Journal of Composite Materials, vol.32, issue.7, pp.623-651, 1998.
DOI : 10.1177/002199839803200702

K. Woo and J. Whitcomb, A post-processor approach for stress analysis of woven textile composites, Composites Science and Technology, vol.60, issue.5, pp.693-704, 2000.
DOI : 10.1016/S0266-3538(99)00165-7

J. Bobet, R. Naslain, A. Guette, N. Ji, and J. Lebrun, Thermal residual stresses in ceramic matrix composites???II. Experimental results for model materials, Acta Metallurgica et Materialia, vol.43, issue.6, pp.2255-2268, 1995.
DOI : 10.1016/0956-7151(94)00430-7

J. Bobet and J. Lamon, Study of thermal residual stresses in ceramic matrix composites, Journal of Alloys and Compounds, vol.259, issue.1-2, pp.260-264, 1997.
DOI : 10.1016/S0925-8388(97)00090-X

M. Steen, Tensile mastercurve of ceramic matrix composites: significance and implications for modelling, Materials Science and Engineering: A, vol.250, issue.2, pp.241-248, 1998.
DOI : 10.1016/S0921-5093(98)00597-8

M. Broda, A. Pyzalla, and W. Reimers, X-ray analysis of residual stresses in C/SiC composites, Applied Composite Materials, vol.6, issue.1, pp.51-66, 1999.
DOI : 10.1023/A:1008885319105

S. Bertrand, C. Droillard, R. Pailler, X. Bourrat, and R. Naslain, TEM structure of (PyC/SiC)n multilayered interphases in SiC/SiC composites, Journal of the European Ceramic Society, vol.20, issue.1, pp.1-13, 2000.
DOI : 10.1016/S0955-2219(99)00086-2

H. Mei, Measurement and calculation of thermal residual stress in fiber reinforced ceramic matrix composites, Composites Science and Technology, vol.68, issue.15-16, pp.3285-3292, 2008.
DOI : 10.1016/j.compscitech.2008.08.015

J. Bobet and J. Lamon, Thermal residual stresses in ceramic matrix composites???I. Axisymmetrical model and finite element analysis, Acta Metallurgica et Materialia, vol.43, issue.6, pp.2241-2253, 1995.
DOI : 10.1016/0956-7151(94)00429-3

J. Bobet and J. Lamon, Study of thermal residual stresses in ceramic matrix composites, Journal of Alloys and Compounds, vol.259, issue.1-2, pp.260-264, 1997.
DOI : 10.1016/S0925-8388(97)00090-X

P. Vena, Thermal Residual Stresses in Graded Ceramic Composites: A Microscopic Computational Model Versus Homogenized Models, Meccanica, vol.16, issue.2, pp.163-179, 2005.
DOI : 10.1007/s11012-005-3064-3

J. Kennedy and R. Eberhart, Particle swarm optimization, Proceedings of ICNN'95, International Conference on Neural Networks, 1995.
DOI : 10.1109/ICNN.1995.488968

P. Fourie and A. Groenwold, The particle swarm optimization algorithm in size and shape optimization, Structural and Multidisciplinary Optimization, vol.23, issue.4, pp.259-267, 2002.
DOI : 10.1007/s00158-002-0188-0

I. Trelea, The particle swarm optimization algorithm: convergence analysis and parameter selection, Information Processing Letters, vol.85, issue.6, pp.317-325, 2003.
DOI : 10.1016/S0020-0190(02)00447-7
URL : https://hal.archives-ouvertes.fr/hal-01313364

G. Venter and J. Sobieszczanski-sobieski, Multidisciplinary optimization of a transport aircraft wing using particle swarm optimization, Structural and Multidisciplinary Optimization, vol.26, issue.1-2, pp.121-131, 2004.
DOI : 10.1007/s00158-003-0318-3

C. Elegbede, Structural reliability assessment based on particles swarm optimization, Structural Safety, vol.27, issue.2, pp.171-186, 2005.
DOI : 10.1016/j.strusafe.2004.10.003

K. Lee and Z. Geem, A new meta-heuristic algorithm for continuous engineering optimization: harmony search theory and practice, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.36-38, pp.3902-3933, 2005.
DOI : 10.1016/j.cma.2004.09.007

R. Kathiravan and R. Ganguli, Strength design of composite beam using gradient and particle swarm optimization, Composite Structures, vol.81, issue.4, pp.471-479, 2007.
DOI : 10.1016/j.compstruct.2006.09.007

S. Suresh, P. Sujit, and A. Rao, Particle swarm optimization approach for multi-objective composite box-beam design, Composite Structures, vol.81, issue.4, pp.598-605, 2007.
DOI : 10.1016/j.compstruct.2006.10.008

L. J. Li, Z. Huang, F. Liu, and Q. Wu, A heuristic particle swarm optimizer for optimization of pin connected structures, Computers & Structures, vol.85, issue.7-8, pp.340-349, 2007.
DOI : 10.1016/j.compstruc.2006.11.020

N. Chang, W. Wang, Y. W. Wang, and J. , Ply stacking sequence optimization of composite laminate by permutation discrete particle swarm optimization, Structural and Multidisciplinary Optimization, vol.62, issue.1, pp.179-187, 2010.
DOI : 10.1007/s00158-009-0417-x

T. Noda, H. Araki, F. Abe, and M. Okada, Microstructure and mechanical properties of CVI carbon fiber/ SiC composites, Journal of Nuclear Materials, pp.191-194, 1992.

Z. Geem, J. Kim, and G. Loganathan, A New Heuristic Optimization Algorithm: Harmony Search, SIMULATION, vol.76, issue.2, pp.60-68, 2001.
DOI : 10.1177/003754970107600201

K. Lee and Z. Geem, A new structural optimization method based on the harmony search algorithm, Computers & Structures, vol.82, issue.9-10, pp.781-798, 2004.
DOI : 10.1016/j.compstruc.2004.01.002

P. Puglia, M. Sheikh, and D. Hayhurst, Classification and quantification of initial porosity in a CMC laminate, Composites Part A: Applied Science and Manufacturing, vol.35, issue.2, pp.223-230, 2004.
DOI : 10.1016/j.compositesa.2003.09.026

M. Sheikh and J. Farooqi, Finite element modelling of thermal transport in ceramic Scientific Publications

Y. J. Xu, W. H. Zhang, and H. B. Wang, Prediction of Effective Elastic Modulus of Plain Weave Multi-phase and Multi-layer Silicon Carbide Ceramic Matrix Composite, Materials Science and Technology, issue.4, pp.24-435, 2008.

Y. J. Xu, W. H. Zhang, and D. Bassir, Stress analysis of multi-phase and multi-layer plain weave composite structure using global/local approach, Composite Structures, vol.92, issue.5, pp.92-1143, 2010.
DOI : 10.1016/j.compstruct.2009.09.053

Y. J. Xu, W. H. Zhang, and M. Domaszewski, Microstructure modelling and prediction of effective elastic properties of 3D multiphase and multilayer braided composite, Materials Science and Technology, vol.80, issue.7
DOI : 10.1016/S0045-7949(98)00132-1

H. B. Wang, W. H. Zhang, Y. J. Xu, and Q. Zeng, Numerical computing and experimental validation of effective elastic properties of 2D multilayered C/SiC composites, Materials Science and Technology, vol.59, issue.489, pp.24-1385, 2008.
DOI : 10.1016/S0263-8223(02)00028-4

T. Gao, W. H. Zhang, J. H. Zhu, Y. J. Xu, and D. Bassir, Topology optimization of heat conduction problem involving design-dependent heat load effect, Finite Elements in Analysis and Design, vol.44, issue.14, pp.44-805, 2008.
DOI : 10.1016/j.finel.2008.06.001

Y. J. Xu, W. H. Zhang, D. Chamoret, and M. Domaszewski, Minimizing Thermal Residual Stresses in Ceramic Matrix Composites by using Particle Swarm Optimization Algorithm, The Second International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, 2011.

Y. J. Xu, Microstructure modeling and prediction of effective elastic properties of multi-phase and multi-layer woven/braided composite, First Joint French-Dutch-Chinese Workshop on Composites Materials and Structures, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00389330

Y. J. Xu, W. H. Zhang, and D. Bassir, Multi-objective optimization of thermal-elastic properties for multi-phase and multi-layer composite, 8th World Congress on Structural and Multidisciplinary Optimization, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00441105