A. G. and J. N. Housden, Adhesion of thin coatings ? the VAMAS (TWA 22-2) interlaboratory exercise, Surf. Coat. Technol, vol.197, pp.336-344, 2005.

A. K. Bienk-e, . O. Schweitz-k, C. J. Reitz-h, . Kringhoj-p, and . J. Bottiger, Deposition, microstructure and mechanical and tribological properties of magnetron sputtered TiN/TiAlN multilayers, Surf. Coat. Technol, vol.123, pp.219-226, 2000.

B. O. Schmid-p and L. F. Sanjines-r, High-temperature oxidation resistance of Cr 1-x Al x N thin films deposited by reactive magnetron sputtering, Surf. Coat. Technol, pp.163-164, 2003.

B. H. Berg-s and C. P. Nender-c, Hysteresis effects in the sputtering process using two reactive gases, Thin Solid Films, vol.260, pp.181-186, 1995.

B. V. Stefanopoulos-n and . Deguilhen-f, Etude du frottement et de l'usure d'acier à outils de travail à chaud Toulouse : Institut Natinal Polytechnique de Toulouse Friction monitored scratch adhesion testing, ThèseINP. Sciences et Génie des Matériaux, pp.172-74, 1995.

B. E. Reitz-h and . J. Mikkelson-n, Wear and friction properties of hard PVD coatings, Surf. Coat. Technol, pp.76-77, 1995.

F. C. Billard-a, Low-frequecy modulation of pulsed d.c. or r.f. discharges for controlling the reactive magnetron sputtering process, Surf. Coat. Technol, pp.86-87, 1996.

B. K. Bagcivan-n, I. P. Bolz-s, and A. J. Cremer-r, Advantages of nanocomposite coatings deposited by High Power Pulse Magnetron Sputtering technology, J. Mat. Proc. Technol, vol.209, pp.165-170, 2008.

B. J. Lattemann-m, G. J. Ehiasarian-a, A. Y. Gonzalvo, . Brenning-n, and . Helmersson-u, The ion energy distributions and ion flux composition from a high power impulse magnetron sputtering discharge, Thin Solid Films, vol.515, pp.1522-1526, 2006.

B. Vidakis-n, . Leyendecker-t, and F. Lemmer-o, Determination of the fatigue behaviour of thin hard coatings using the impact test and a FEM simulation, Surf. Coat. Technol, pp.86-87, 1996.

X. Cai and H. Bangert, Hardness measurements of thin films-determining the critical ratio of depth to thickness using FEM, Thin Solid Films, vol.264, issue.1, pp.59-71, 1995.
DOI : 10.1016/0040-6090(95)06569-5

C. M. Kapsa-p, Usure des contacts mécaniques ? Eléments de tribologie, Techniques de l'Ingénieur. Paris : Techniques de l'Ingénieur, pp.5066-5067, 2001.

C. L. Du-y, W. S. , and L. J. , A comparative research on physical and mechanical properties of (Ti, Al)N and (Cr, Al)N PVD coatings with high Al content, Inter. J. Refrac. Met. And Hard Mat, vol.25, pp.400-404, 2007.

C. D. Tomasel-f and C. D. Sproul-w, Power supply with arc handling for high peak power magnetron sputtering, J. Vac. Sci. Technol, vol.22, pp.1415-1419, 2004.

C. R. , R. N. Bellaton-b, and . J. Von, The nano-scratch tester (NST) as a new tool for assessing the strength of ultrathin hard coating and the mar resistance of polymer films, Thin Solid Films, vol.332, pp.151-156, 1998.

D. J. Sproul-w and C. D. Geisler-m, High power pulse reactive sputtering of TiO 2, th annual Technical Conference Proceedings, pp.47-215, 2004.

D. B. , W. P. Weiss-r, C. D. Scholl-r, . D. Sproul-w, and A. A. Tomasel-f, Carbon Thin Film Deposition Using High Power Pulsed Magnetron Sputtering, 46 th annual Technical Conference Proceedings of the Society of Vacuum Coaters, pp.158-165, 2003.

E. A. New-r, . Munz-w.-d, . Hultman-l, . Helmersson-u, and . Kouznetsov-v, Influence of high power densities on the composition of pulsed magnetron plasmas, Vacuum, vol.65, pp.147-154, 2002.

E. A. Munz-w.-d, . Hultman-l, . Helmersson-u, and . Petrov-i, High power pulsed magnetron sputtered CrNx films, Surf. Coat. Technol, pp.163-164, 2003.

F. A. Vaz-f, C. L. Parreira-n, C. A. Goudeau-ph, R. J. Le-bourhis-e, M. D. Borcea-b et al., The influence of structure changes in the properties of TiC x O y decorative thin films, Thin Solid Films, vol.515, pp.5424-5429, 2007.

. Paris, Techniques de l'Ingénieur, pp.4160-4161, 2005.

L. J. Mishra-b and M. J. Sproul-w, A study of the oxidation behaviour of CrN and CrAlN thin films in air using DSC and TGA analyses, Surf. And Coat. Technol, vol.202, pp.3272-3283, 2008.

M. F. Sanjine-'s-r and A. G. Karimi-a, Effect of substrate temperature and bias voltage on the crystallite orientation in RF magnetron sputtered AlN thin films, Thin Solid Films, vol.515, pp.260-265, 2006.

M. D. Lapostolle-f, P. F. Billard-a, and . Frantz-c, Enhanced Deposition Rate of High Quality Stoichiometric Ceramic Compounds Reactively Sputtered Deposited at Low Pressure by Modulating the Discharge Current at Low Frequency, Surf. Coat. Technol, pp.116-119, 1999.

M. V. , N. M. Haenen-k, M. A. D-'olieslaeger, and . Vanecek-m, Physical properties of polycrystalline aluminium nitride films deposited by magnetron sputtering, Diam. and Rel. Mater, vol.13, pp.1120-1124, 2004.

M. D. Borcea-b, M. A. , and C. R. Vaz-f, Mechanical and tribological properties of TiCxOy thin films, The annals of « Dunarea De Jos, 2005.

M. J. Baroch-p, N. J. Vlcek, and H. J. , Reactive magnetron sputtering of thin films: present status and trends, Thin Solid Films, vol.475, pp.208-218, 2005.

M. J. , D. R. , and S. J. Zeman-p, Properties of reactively sputtered W-Si-N films, Surf. Coat. Technol, vol.200, pp.3886-3895, 2006.

N. T. Kappertz-o, . Kubart-t, . Berg-s, and . Severin-d, State of the art in reactive magnetron sputtering, The 4 th Mikkeli International Industrial Coating Seminar, pp.16-18, 2006.

O. W. Pharr-g, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Mat. Res. Soc, vol.7, issue.6, pp.1564-1583, 1992.

A. J. Sarakinos-k and U. F. Wuttig-m, On the relationship between the peak target current and the morphology of chromium nitride thin films deposited by reactive high power pulsed magnetron sputtering, J. Phys. D-Appl, vol.42, pp.15304-15305, 2009.

B. S. Koval-n and Z. S. Sochugov-n, Investigation of a highcurrent pulsed magnetron discharge initiated in the low-pressure diffuse arc plasma, Proceedingg of the XVIIth International Symposium on Discharges and Electrical Insulation in Vacuum, p.1074, 1996.

B. B. Frantz-c, Attempted modelling of thickness and chemical heterogeneity in coatings prepared by d.c. reactive magnetron sputtering, Surf. Coat. Technol, vol.59, pp.41-47, 1993.

D. D. Buyle-g and H. J. De-gryse-r, Discharge voltage measurements during magnetron sputtering, Surf. Coat. Technol, vol.200, pp.4329-4338, 2006.

E. A. New-r, . Munz-w.-d, . Hultman-l, . Helmersson-u, and . Kouznetsov-v, Influence of high power densities on the composition of pulsed magnetron plasmas, Vacuum, vol.65, pp.147-154, 2002.

E. A. Munz-w.-d, . Hultman-l, . Helmersson-u, and . Petrov-i, High power pulsed magnetron sputtered CrNx films, Surf. Coat. Technol, pp.163-164, 2003.

E. A. , W. J. , P. I. Ehia07b, A. A. Ehiasarian, and P. I. , Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion Combined filtered cathodic arc etching pretreatment-magnetron sputter deposition of highly adherent CrN film, J. Appl. Phys. J. Vac. Sci. Technol, vol.101, issue.25, pp.54301-1543, 2007.

V. A. Ehiasarian-a, G. J. Gudm02-], and A. J. Helmersson-u, HIPIMS plasma properties and deposition at different magnetic field configurations In : Plasma Surface Engineering Spatial and temporal behavior of the plasma parameters in a pulsed magnetron discharge, Surf. Coat. Technol, vol.161, pp.249-256, 2002.

H. J. , K. S. , K. H. , and K. D. Choi-i, The effect of arc ion pre-bombardment on the impact failure of TiN coating on Co-WC, Surf. Coat. Technol, vol.98, pp.991-996, 1998.

H. U. Lattemann-m, . J. Bohlmark, and G. P. Ehiasarian-a, Ionized physical vapour deposition (IPVD): A review of technology and applications, Thin Solid Films, vol.513, pp.1-24, 2006.

H. J. Qian-f, Mechanisms for highly ionized magnetron sputtering, J. Appl. Phys, vol.78, pp.758-765, 1995.

H. P. and R. C. Ehiasarian-a, CrAlYN/CrN superlattice coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique, Surf. Coat. Technol, vol.201, pp.4105-4110, 2006.

H. P. Ehiasarian-a, . Deeming-a, and . Schimpf-c, Novel TiAlCN/VCN nanoscale multilayer PVD coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering (HIPIMS/UBM) technology, Vacuum, vol.82, pp.1312-1317, 2008.

K. S. Quaeyhaegens-c, . Knuyt-g, and . M. Stals-l, Energy distributions of ions in an unbalanced magnetron plasma measured with energy-resolved mass spectroscopy, Surf. Coat. Technol, vol.89, pp.177-184, 1997.

K. V. Macak-k, . M. Schneider-j, . Helmersson-u, and . Petrov-i, A novel pulsed magnetron sputter technique utilizing very high target power densities, Surf. Coat. Technol, vol.122, pp.290-293, 1999.

K. A. Kusa99, . E. Kusano, S. T. Fukushima-k, . Saiki-s, . Kikuchi-n et al., Modelling of the cutting tool stresses in machining og Inconel 718 using artificial neural networks Effects of Ar pressure on ion flux energy distribution and ion fraction in r.f.-plasma-assisted magnetron sputtering, press [, pp.120-121, 1999.

L. M. Ehiasarian-a, . J. Bohlmark, . A. Persson-p, and . Helmersson-u, Investigation of high power impulse magnetron sputtering pretreated interfaces for adhesion enhancement of hard coatings on steel, Surf. Coat. Technol, vol.200, pp.6495-6499, 2006.

L. D. Brenning-n, J. D. Larsson-p, . Wallin-e, R. M. Lattemann-m, and . Helmersson-u, Transition between the discharge regimes of high power impulse magnetron sputtering and conventional direct current magnetron, Plasma Sources Sci. Technol, vol.184, pp.10-1088, 2009.

M. D. Fetisov-i and . V. Khodachenko-g, High-current low-pressure quasistationnary discharge in a magnetic-field ? experimental research, Plasma Phys. Rep, vol.21, pp.400-409, 1995.

M. B. Lewis-d and . Creasey-s, Defects in TiN and TiAIN coatings grown by combined cathodic arc/unbalanced magnetron technology, Vacuum, vol.46, pp.323-330, 1994.

M. J. , L. J. Vlcek, and . Tolg-t, Pulsed dc magnetron discharge for high-rate sputtering of thin films, J. Vac. Sci. Technol, vol.19, pp.420-424, 2001.

O. J. and C. A. Vieira-m, The influence of Er doping of AlN sputtered coatings on their mechanical properties, Surf. Coat. Technol, vol.132, pp.99-104, 2000.

S. H. and P. W. Santhanam-a, State of the art in hard coatings for carbide cutting tool, Surf. Coat. Technol, vol.102, pp.183-190, 1998.

R. C. Ehiasarian-a and . E. Hovsepian-p, CrN/NbN supperlatice structured coatings with enhanced corrosion resistance achieved by high power impulse magnetron sputtering interface pretreatment, Thin Solid Films, vol.515, pp.3685-3692, 2007.

S. K. Alami, . Klever-c, and . Wuttig-m, Growth of tio(x) films magnetron sputtering by high power pulsed from a compound tio(1.8) target, Review Adv. Mater. Sci, vol.15, pp.44-48, 2007.

S. C. Donohue-l, L. D. Munz-w.-d, . D. Twesten-r, and . Petrov-i, Enhanced adhesion through local epitaxy of transition-metal nitride coatings on ferritic steel promoted by metal ion etching in a combined cathodic arc/unbalanced magnetron deposition system, J. Vac. Sci. Technol, vol.18, pp.1718-1723, 2000.

S. C. , L. D. Munz-w.-d, and . Petrov-i, Substrate ion etching in combined steered cathodic arc-UBM deposition system: Effects on interface architecture, adhesion, and tool performance, Surf. Eng, vol.16, pp.176-180, 2000.

S. L. Nesladek-m and . Quaeyhaegensc, Current industrial practice ? Critcal issues in hard PVD and PA-CVD coatings, Surf. Coat. Technol, vol.91, pp.230-239, 1997.

V. J. Stebut, D. A. Saker-a, and R. R. Billard-a, Optimization of the contact mechanical strength of magnetron-sputtered nitrogen-doped AISI 316L physically vapour deposited coatings, Surface and Coatings Technology, vol.57, issue.1, pp.31-42, 1993.
DOI : 10.1016/0257-8972(93)90333-J

V. J. Kudlacek-p and M. J. Burcalova-k, High-power pulsed sputtering using a magnetron with enhanced plasma confinement, J. Vac. Sci. Technol, vol.25, pp.42-44, 2007.

V. J. Kudlacek-p and M. J. Burcalova-k, High-power pulsed sputtering using a magnetron with enhanced plasma confinement, J. Vac. Sci. Technol, vol.25, pp.42-47, 2007.

W. L. Strafford-k, . Subramanian-c, and . P. Wilks-t, Observations on the structure, hardness and adhesion properties of a selection of multicomponent refractory element nitride coatings, J., Mater. Process. Technol, vol.56, pp.375-384, 1996.

. A. Références-bibliographiques-[-auge04-]-auger-m, J. M. Vazquez-l, and A. J. Sanchez-o, Structure et morphology evolution of AlN films grown by DC sputtering, Surf. Coat. Technol, pp.180-181, 2004.

B. H. Deepthi-b and R. K. , Growth and characterization of aluminum nitride coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering, Thin Solid Films, vol.516, pp.4168-4174, 2008.

B. V. Stefanopoulos-n and . Deguilhen-f, Friction monitored scratch adhesion testing, Surf. Coat. Technol, pp.74-75, 1995.

F. C. Billard-a, Low-frequecy modulation of pulsed d.c. or r.f. discharges for controlling the reactive magnetron sputtering process, Surf. Coat. Technol, pp.86-87, 1996.

B. K. Bagcivan-n, I. P. Bolz-s, A. J. , C. R. Bohl06-]-bohlmark, G. J. Lattemann-m et al., Advantages of nanocomposite coatings deposited by High Power Pulse Magnetron Sputtering technology The ion energy distributions and ion flux composition from a high power impulse magnetron sputtering discharge, J. Mat. Proc. Technol. Thin Solid Films, vol.515, pp.1522-1526, 2006.

C. S. , P. , and K. S. Kim-k, H, Effects of bias voltage and temperature on mechanical properties of Ti?Si?N coatings deposited by a hybrid system of arc ion plating and sputtering techniques, Thin Solid films, pp.447-448, 2004.

V. Dimitrova, M. D. Paskova-t, . Uzunov-t, and D. D. Ivanov-n, Aluminium nitride thin films deposited by DC reactive magnetron sputtering, CSM Instruments, pp.161-164, 1998.
DOI : 10.1016/S0042-207X(98)00150-X

E. A. Munz-w.-d, . Hultman-l, . Helmersson-u, and . Petrov-i, High power pulsed magnetron sputtered CrNx films, Surf. Coat. Technol, pp.163-164, 2003.

F. U. Salas-o and O. J. , Deposition of AlN on Al substrates by reactive magnetron sputtering, Surf. Coat. Technol, vol.200, pp.1768-1776, 2005.

G. V. Dovidenko-k, . K. Sharma-a, and . Narayan-j, Thermal reactions and microstructure of TiN?AlN layered nano-composites, Mater. Sci. Eng, vol.68, pp.85-90, 1999.

H. K. , R. H. Laukkenen-a, H. S. Wallin-k, . Jacobson-s, . Wiklund-u et al., Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour Influence of ion bombardment on structure and properties of unbalanced magnetron grown CrNx coatings, Wear Surf. Coat. Technol, vol.114, pp.52-59, 1999.

J. S. Peng-d, . Zhao-x, and L. Q. Xie-l, Study on the mechanical and chemical properties of (T&Al) N films prepared by DC magnetron sputtering, App. Surf. Sci, vol.84, pp.373-377, 1995.

J. C. Madar-r, G. S. , and B. C. Doppelt-p, Preparation of aluminum nitride films by low pressure organometallic chemical vapor deposition, Surf. Coat. Technol, pp.76-77, 1995.

K. A. Ravindranath-k, K. D. , and R. P. , Tribological properties of (Ti, Al) N coatings deposited at different bias voltage using the cathodic arc technique, Surf. Coat. Technol, vol.145, pp.60-70, 2001.

K. O. Elsing-r and J. F. Kramer-g, On the origin of compressive stress in PVD coatings ? an explicative model, Surf. Coat. Technol, vol.46, pp.265-274, 1991.

L. J. , M. J. Mishra-b, . Pinkas-m, and . D. Sproul-w, Nano-structured CrN/AlN multilayer coatings synthesized by pulsed closed field unbalanced magnetron sputtering, Surf. Coat. Technol, 2009.

M. S. Ghekiere-p and D. D. De-gryse-r, Review : Biaxial alignment in sputter deposited thin films, Thin Solid Films, vol.515, pp.1229-1249, 2006.

M. J. Baroch-p, J. Vlýek, N. K. , and H. J. , Reactive magnetron sputtering of thin films: present status and trends, Thin Solid Films, vol.475, pp.208-218, 2005.

N. E. , L. L. Lv-g, C. H. , F. W. , F. S. et al., Influence of substrate bias on the structure and properties of ZrN films deposited by cathodic vacuum arc, Mater. Sci. and Eng, pp.460-461, 2007.

O. H. Wiedemann-r and S. Preißler, Residual stresses in nitride hard coatings prepared by magnetron sputtering and arc evaporation, Surf. Coat. Technol, pp.74-75, 1995.

O. J. , C. A. Vieira-m, . Bigot-l, M. J. Garapon-c, and J. B. , The influence of erbium doping of Al?N sputtered coatings on their optical properties, Thin Solid Films, vol.446, pp.264-270, 2004.

O. J. , M. A. , and C. A. Vieira-m, Structure, hardness and thermal stability of Ti(Al,N) coatings, Surf. Coat. Technol, vol.201, pp.4073-4077, 2006.

P. X. Shi-l, W. P. Zhang-g, and . Liu-w, Influences of bias voltage on mechanical and tribological properties of Ti-Al-C films synthesized by magnetron sputtering, Surf. Coat. Technol, vol.203, pp.1537-1543, 2009.

S. F. Tran-huu, B. A. Loi, and . Frantz-c, Structure-properties relationship of metastable Al-Cr and Al-Ti alloys deposited by r.f. magnetron sputtering : role og nitrogen, Surf. and Coat. Technol, pp.74-75, 1995.

S. F. Billard-a, Main features of magnetron sputtered aluminium-transition metal alloys coatings, Surf. Coat. Technol, pp.142-144, 2001.

S. P. , L. K. Zhou-z, and . G. Shen-y, Structural and mechanical properties of titanium? aluminium?nitride films deposited by reactive close-field unbalanced magnetron sputtering, Surf. Coat. Technol, vol.185, pp.245-253, 2004.

S. B. Synthèse-et-caractérisation-de-films-al-o, A. Et-zr, R. F. Vaz, A. M. Da-silva-m-;-f, and . C. Soares-j, O prépares par pulvérisation cathodique magnétron en condition réactive Thermal oxydation of Ti 1-x Al x N coatings in air, Science et Ingénierie des Matériaux Thèse INPL, pp.168-97, 1994.

W. H. Zhang-s, L. Y. , and S. D. , Bias effect on microstructure and mechanical properties of magnetron sputtered nanocrystalline titanium carbide thin films, Thin Solid Films, vol.516, pp.5419-5423, 2008.

Y. L. , C. J. Hurtado-macias-a, . J. Espinoza-beltran-f, . Zambrano-g, . J. Munoz-saldana et al., Composition and mechanical properties of AlC, AlN and AlCN thin films obtained by r.f. magnetron sputtering, Surf. Coat. Technol, vol.203, pp.1904-1907, 2009.

Z. M. Makino-y, . Nose-m, and . Nogi-k, Phase transition and properties of Ti-Al-N thin films prepared by r.f.-plasma assisted magnetron sputtering. Hin solid Films, pp.203-208