[. Barichard and J. Hao, Une approche hybride pour l'optimisation multi-objectif sous contraintes, LERI Angers, 2003.

M. Bergounioux and -. , Optimisation et contrôle des systèmes linéaires, 2001.

]. P. Bou88, A. Bourdet, and . Clement, A study of optimal-criteria identification based-on the small-displacement screw model, Annals of the CIRP, vol.37, pp.503-506, 1988.

N. Romdhane-ben-khalifa, A. Ben-yahia, and . Zghal, Conception du montage d'usinage des pièces prismatiques par le raisonnement à partir des cas " , CPI, 2007.

A. Billionnet-dunod-belgiquebi01, ]. Z. Bi, and W. J. Zhang, OPTIMISATION DISCRETE De la modélisation à la résolution par des logiciels de programmation mathématique Flexible fixture design and automation: Review, issues and future directions, Int. J. Prod. Res, vol.39, issue.13, pp.2867-2894, 2001.

J. W. Burdick and Y. Liang, Experiments in fixturing mechanics, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422), 2003.
DOI : 10.1109/ROBOT.2003.1241981
URL : http://authors.library.caltech.edu/4007/01/BURicra03.pdf

]. E. Cai95 and . Caillaud, Modélisation des connaissances : aide à la conception des montages d'usinage, Thèse, 1995.

J. S. Carlson, Quadratic Sensitivity Analysis of Fixtures and Locating Schemes for Rigid Parts, Journal of Manufacturing Science and Engineering, vol.123, issue.3, 2001.
DOI : 10.1115/1.1365397

A. Cornand, F. Kolb, J. Lacombe, and I. Rak-?, Usinage et commande numérique, 1988.

I. Charon, A. Erma, and O. Hudry, Méthode d'optimisation combinatoire, 1996.

]. A. Cho05, P. Choubey, F. T. Chan, and M. K. Tiwari-, Solving a fixture configuration design problem using genetic algorithm with learning automata approach, International Journal of Production Research, vol.43, pp.22-4721, 2005.

[. Chen and C. L. Philip-chen, Proper Clamping Sequences in the Fixturing of Prismatic Workpieces, Journal of Design and Manufacturing Automation, vol.3, issue.4, pp.283-299, 2002.
DOI : 10.1177/027836499501400104

]. L. Con04, L. Consalter, and . Boehs, An Approach to Fixture Systems Management in Machining Processes, J. of the Braz. Soc. Of Mech. Sci. & Eng, vol.XXVI, p.2, 2004.

C. Jean-christophe, Introduction à l'optimisation, 1994.

C. Edward, W. De-meter, S. Xie, S. Choudhuri, M. W. Vallapuzha et al., A model to predict minimum required clamp pre-loads in light of fixture?workpiece compliance, International Journal of Machine Tools & Manufacture, pp.41-1031, 2001.

]. J. Dai97, A. Y. Dai, J. Y. Nee, and . Fuh, An approach to automating modular fixture design and assembly, Proceedings of the Institution of Mechanical Engineers, pp.509-521, 1997.

H. Deng and S. N. Melkote, Analysis of Fixturing Dynamic Stability in Macining, Proceeding of the 2005 IEEE International Confecrence on Advanced Intelligent Mechatronics, pp.24-26, 2005.

J. Echave and J. J. Shah, Atomatique Set-up and Fixture Planning for 3- Axis Milling, Proceedings of the: Design Engineering Technical Conferences, 1999.

]. F. Gro94 and . Gromaire, Prédiction des efforts de coupe pour les outils tournants

G. ?. Groupe, La gamme automatique en usinage, HERMES, vol.90

J. Hou and A. J. Trappey, Computer-aided fixture design system for comprehensive modular fixtures, International Journal of Production Research, vol.2, issue.16, pp.3703-3725, 2001.
DOI : 10.1007/BF01749903

]. W. Hu00, Y. Hu, and . Rong, A fast Interference Checking Algorithm for Automated Fixture Design Verification, Int. J. Adv. Manuf. Techno, vol.16, pp.571-581, 2000.

H. Samuel, Y. K. Huanlg, D. W. Rong, and . Yen, Integrated Set-Up Planning and Fixture Design: Issues and Solutions, Transactions of N AMRI/SME, vol.XXX, 2002.

F. José, S. N. Hurtado, and . Melkote, Modeling and Analysis of the Effect of Fixture-Workpiece Coformability on Static Stability, 2002.

]. R. Hun06, J. Hunter, J. M. Rios, A. Perez, and . Vizan, A functional approach for the formalization of the fixture design process, Int J Mach Tool & Manuf, vol.46, pp.683-697, 2006.

F. José, S. N. Hurtado, and . Melkote, A model for synthesis of the fixturing configuration in pin-array type flexible machining fixtures, Int J of Mach Tools & Manuf, vol.42, pp.837-849, 2002.

Y. Jeng and K. Gill, A CAD-based approach to the design of fixtures for prismatic parts, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.1, issue.7, 1997.
DOI : 10.1243/0954405971516473

A. Joneja and T. Chang, Setup and fixture planning in automated process planning systems, IIE Transactions, vol.1, issue.7, pp.653-665, 1999.
DOI : 10.1080/00207549408957028

B. Kannan and P. K. Wright, Efficient algorithms for automated process planning of 2.5D machined parts considering fixturing constraints, International Journal of Computer Integrated Manufacturing, vol.17, issue.1, 2004.
DOI : 10.1080/0951192031000078167

S. Kashyap and W. Devrises, Finite element analysis and optimization in fixture design, Structural Optimization, vol.113, issue.2-3, pp.193-201, 1999.
DOI : 10.1007/BF01195994

]. N. Kay03, F. Kaya, and . Ozturk-, The Application of Chip Removal and Frictional Contact Analysis for Workpiece-Fixture Layout Verification, Int J Adv Technol, vol.21, pp.411-419, 2003.

]. Y. Kan03c, Y. Kang, J. C. Rong, and . Yang, Computer-Aided Fixture Design Verification. Part 3. Stability Analysis, Int J Adv Manuf Technol, vol.21, pp.842-849, 2003.

]. Y. Kan03a, Y. Kang, J. C. Rong, and . Yang, Computer-Aided Fixture Design Verification. Part 1. Framework and Modelling, Int J Adv Manuf Technol, vol.21, pp.827-835, 2003.

]. T. Kow00, A. S. Kow, J. Y. Kumar, and . Fuh, An Integrated Approach to Collision-Free Computer-Aided Modular Fixture Design, The International Journal of Advanced Manufacturing Technology, vol.16, issue.4, pp.233-242, 2000.
DOI : 10.1007/s001700050151

]. A. Kum99, V. Kumar, K. C. Subramaniam, and . Seow, Conceptual design of fixtures using genetic algorithms, International Journal of Manufacturing Technology, vol.15, issue.2, pp.79-84, 1999.

]. A. Kum00, J. Y. Senthil-kumar, T. S. Fuh, and . Kow, An automated design and assembly of interference-free modular fixture setup Machining fixture layout optimization using the genetic algorithm, Computer-Aided Design International Journal of Machine Tools& Manufacture, vol.32, issue.40, pp.583-596, 2000.

]. J. Li99a, W. Li, Y. Ma, and . Rong, Fixturing surface accessibility analysis for automated fixture design, Int. J. Prod. Res, vol.37, issue.13, pp.2997-3016, 1999.

]. Li99b, . Bo, S. N. Li, and . Melkote, Improved workpiece location accuracy through fixture layout optimization, Int J of Mach Tools & Manuf, vol.39, pp.871-883, 1999.

]. Y. Lia00, S. J. Liao, and . Hu, Flexible multibody dynamics based fixtureworkpiece analysis model for fixturing stability, Int. J. of Mach Tool & Manu, vol.40, pp.343-362, 2000.

]. Y. Lia01, S. J. Liao, and . Hu, An Integrated Model of a Fixture-Workpice System for Surface Quality Prediction, Int. J. Adv. Manuf. Technol, vol.17, pp.810-818, 2001.

]. Liu03, D. R. Liu, and . Strong, Machining Fixture Verification for Nonlinear Fixture Systems, Int J Adv Manuf Technol, vol.21, pp.426-437, 2003.

]. B. Li00, S. N. Li, S. Y. Melkote, and . Liang, Analysis of Reactions and Minimum Clamping Force for Machining Fixtures with Large Contact Areas, Int. J. Adv. Manuf. Technol, 2000.

]. B. Li01a, S. N. Li, and . Melkote, Optimal Fixture Design Accounting for the Effect of Workpice Dynamics, Int J Adv Manuf Techno, vol.18, pp.701-707, 2001.

]. B. Li01b, S. N. Li, and . Melkote, Fixture clamping force optimisation and its impact on workpiece location accuracy, Int. J. Adv. Man. Tech, vol.18, 2001.

R. A. Marin and P. M. Ferreira, Kinematic Analysis and Synthesis of Deterministic 3-2-1 Locator Schemes for Machining Fixtures, Journal of Manufacturing Science and Engineering, vol.123, issue.4, 2001.
DOI : 10.1115/1.1381396

R. A. Marin and P. M. Ferreira, Optimal Placement of Fixture Clamps: Minimizing the Maximum Clamping Forces, Journal of Manufacturing Science and Engineering, vol.124, issue.3, 2002.
DOI : 10.1115/1.1469520

R. A. Marin and P. M. Ferreira, Analysis of the Influence of Fixture Locator Errors on the Compliance of Work Part Features to Geometric Tolerance Specifications, Journal of Manufacturing Science and Engineering, vol.125, issue.3, 2003.
DOI : 10.1115/1.1578669

]. W. Ma98, Z. Ma, Y. Lei, and . Rong, FIX-DES: A Computer-Aided Modular Fixture Configuration Design System, Int J Adv Manuf Techol, vol.14, pp.21-32, 1998.

]. W. Ma99, J. Ma, Y. Li, and . Rong, Development of automated fixture planning systems, International Journal of Advenced Manufacturing Technology, vol.15, issue.3, pp.171-181, 1999.

]. A. Nee00, A. Nee, Z. J. Kumar, and . Tao, An intelligent fixture with a dynamic clamping scheme, Proc. Inst. Mech. Engrs, pp.214-183, 2000.

P. -. Par95-]-h, Contribution à la conception automatique des gammes d'usinage: le problème du posage et du bridage des pièces, Thèse INP Grenoble, 1995.

J. Payne and V. Cariapa, A fixture repeatability and reproducibility measure to predict the quality of machined parts, International Journal of Production Research, vol.38, issue.18, pp.4763-4781, 2000.
DOI : 10.1080/00207540050205622

D. M. Pelinescu, Y. G. Wang, and . Requicha, Multi-objective optimal fixture layout design Robotics and Computer Integrated Manufacturing 0736-5845 Automatic Fixture Synthesis in 3D, International Conference on Robotics and Automation, 1997.

]. T. Pho08, D. Phoomboplab, J. Ceglarek, and . Uicker-jr-, Geometric Constraint and Variation Propagation Model in Multi-stage Assembly Systems with Part-topart Joints and General 3D Fixture Layouts, 2008.

]. G. Pra07, K. P. Prabhaharan, R. Padmanaban, and . Krishnakumar, Machining fixture layout optimization using FEM and evolutionary techniques, Int J Manuf Technol, vol.32, pp.1090-1103, 2007.

[. Qin, W. Zhang, Z. Wu, and M. Wan, Systematic Modeling of Workpiece-Fixture Geometric Default and Compliance for the Prediction of Workpiece Machining Error, Journal of Manufacturing Science and Engineering, vol.129, issue.4, 2007.
DOI : 10.1115/1.2336260

A. Raghu and S. N. Melkote, Analysis of the effects of fixture clamping sequence on part location errors, International Journal of Machine Tools and Manufacture, vol.44, issue.4, pp.373-382, 2004.
DOI : 10.1016/j.ijmachtools.2003.10.015

U. Roy and J. Liao, Geometric reasoning for re-allocation of supporting and claming positions in the automated fixture design system, IIE Transactions, vol.31, pp.313-322, 1999.

J. Roy and . Liao, Fixturing Analysis For Stability Consideration in an Automated Fixture Design System, Journal of Manufacturing Science and Engineering, vol.124, issue.1, 2002.
DOI : 10.1115/1.1413778

]. Y. Ron01, W. Rong, Y. Hu, Y. Kang, D. W. Zhang et al., Locating error analysis and tolerance assignment for computer-aided fixture design, Int. J. Prod. Res, vol.39, issue.15, pp.3529-3545, 2001.

S. Satyanarayana and S. N. Melkote, Finite element modeling of fixture???workpiece contacts: single contact modeling and experimental verification, Thèse Ecole Polytechnique, pp.903-913, 2004.
DOI : 10.1016/j.ijmachtools.2004.02.010

. San01-]-supapan, F. Sangnui, and . Peters, The Impact of Surface Errors on the Location and Orientation of a Cylindrical Workpiece in a Fixture, J. Manu. Sci. Eng, vol.123, 2001.

[. Segal, C. Romanescu, and N. Gojinetchi, Metodologies for Automated Design of Modular Fixtures, Gh.Asachi, 2001.

P. Shane, S. N. Siebenaler, and . Melkote, Prediction of workpiece deformation in a fixture system using the finite element method, Int J Mach Tool & Manuf, vol.46, pp.51-58, 2006.

[. Segal, C. Romanescu, and N. Gojinetchi, Application of modular fixturing for FMS, Gh.Asachi, 2001.

]. Z. Tao99a, A. Tao, A. Y. Kumar, and . Nee, Automatic generation of dynamic clamping forces for machining fixtures, Int. J. Prod. Res, vol.37, issue.12, pp.1755-2776, 1999.

]. Z. Tao99b, A. Tao, A. Y. Kumar, and . Nee, A Computational geometry approach to optimum clamping synthesis of machining fixtures, Int. J. Prod. Res, vol.37, issue.15, pp.3495-3517, 1999.

Y. T. Ernest, A. Tan, J. Y. Kumar, A. Y. Fuh, and . Nee, Modeling, Analysis, and Verification of Optimal Fixturing Design, IEEETransaction on Automation Science and Engineering, vol.1, issue.2, 2004.

E. Vareilles and -. , Conception et approches par propagation de contraintes: contribution à la mise en oeuvre d'un outil d'aide interactif, Thèse INP Toulouse, 2005.

[. Vallapuzha, E. C. De-meter, S. Choudhuri, P. Raghunath, E. C. Khetan-subramanian-vallapuzha et al., An investigation of the effectiveness of fixture layout optimization methods, International Journal of Machine Tools and Manufacture, vol.42, issue.2, pp.251-263, 2002.
DOI : 10.1016/S0890-6955(01)00114-6

W. Benjamin and . Wah, Hybrid Constrained Simulated Annealing and Genetic Algorithms for Nonlinear Constrained Optimization

M. Wang and D. M. Pelinescu, Contact Force Prediction and Force Closure Analysis of a Fixtured Rigid Workpiece With Friction, Journal of Manufacturing Science and Engineering, vol.125, issue.2, 2003.
DOI : 10.1115/1.1557298

]. Y. Wan05, X. Wang, Q. Chen, N. Liu, and . Gindy, Optimisation of machining fixture under multi-constraints, In J of Machine Tools & Manufacture, 2005.

]. Y. Wan08, X. Wang, N. Chen, J. Gindy, and . Xie, Elastic deformation of a fixture and turbine blades system based on finite element anlysis, Int J Manuf Technol, vol.36, pp.296-304, 2008.

]. N. Wu96, K. C. Wu, and . Chart, A Genetic Algorithm Based Approach to Optimal Fixture Configuration Automated modular fixture planning: Accuracy, clamping, and accessibility analysis, Computtrs ind. Engng, pp.919-924, 1996.

]. Y. Wu98b, Y. Wu, W. Rong, S. R. Ma, and . Leclair, Automated modular fixture planning: Geometry analysis, Robotics and Computer Integrated Manufacturing, vol.14, pp.1-15, 1998.

W. Xie, S. Choudhuri, S. Vallapuzha, E. C. De, M. W. Meter et al., Experimental assessment of a clamp actuation intensity analysis model, International Journal of Production Research, vol.38, issue.18, pp.4611-4633, 2000.
DOI : 10.1080/00207540050205541

W. Xie, E. C. De-meter, and M. W. Trethewey, An experimental evaluation of coefficients of static friction of common workpiece???fixture element pairs, International Journal of Machine Tools and Manufacture, vol.40, issue.4, pp.467-488, 2000.
DOI : 10.1016/S0890-6955(99)00082-6

C. Xionga, Y. Lib, Y. K. Rongc, and . You-lun-xionga-, Qualitative analysis and quantitative evaluation of fixturing Robotics and Computer Integrated Manufacturing 0736-5845 Contact condition modelling for machining fixture setup processes, International Journal of Machine Tools & Manufacture, vol.39, pp.787-803, 1999.

[. Yuru, P. Gaoliang-zhang, W. Hu, Y. Rong, and D. W. Yen, Development of an integrated system for setup planning and fixture design in CAPP Graph-based set-up planning and tolerance decomposition for computer-aided fixture design, Int Conf on Adv Intelligent Mechatronics, pp.24-28, 2001.

[. Zirmi, H. Paris, and I. Belaidi, Analyse de la conception d'un montage d'usinage ?? l'aide d'??l??ments modulaires, M??canique & Industries, vol.8, issue.1, pp.1-6, 2007.
DOI : 10.1051/meca:2007017

[. Zirmi, H. Paris, and I. Belaidi, Conception de montage d'usinage : placement des éléments technologiques en contact avec la pièce " , 19éme Congrès Français de Mécanique, pp.24-28

@. Annexe and . Exemple, Les contraintes sont, p.80

@. Annexe and . Exemple, Les coordonnées du triangle initial, p.50