. Enfin, des mesures sur les tranches d'éprouvettes avec sauts de plis ont été effectuées

S. Avril, E. Ferrier, A. Vautrin, P. Hamelin, and Y. Surrel, A full-field optical method for the experimental analysis of reinforced concrete beams repaired with composites, Composites Part A: Applied Science and Manufacturing, vol.35, issue.7-8, pp.873-884, 2004.
DOI : 10.1016/j.compositesa.2004.01.012

J. C. Brewer and P. A. Lagace, Quadratic Stress Criterion for Initiation of Delamination, Journal of Composite Materials, vol.8, issue.12, pp.1141-1155, 1988.
DOI : 10.1177/002199838802201205

J. Brillaud and F. Lagattu, Limits and possibilities of laser speckle and white-light image-correlation methods: theory and experiments, Applied Optics, vol.41, issue.31, pp.6603-6613, 2002.
DOI : 10.1364/AO.41.006603

L. Bruno and A. Pogglialani, Beack to the future : from Speckle to Holography, Optics and Lasers in Engineering, vol.3, pp.538-549, 2007.

F. W. Crossman and A. S. Wang, The Dependence of Transverse Cracking and Delamination on Ply Thickness in Graphite/Epoxy Laminates, Damage in Composite Materials, K.L. Reifsnider editor, pp.118-139, 1980.
DOI : 10.1520/STP34324S

R. Czarnek, D. Post, and C. T. Herakovich, Edge effect in laminated composites. Experimental techniques, pp.18-21, 1983.

I. Daniel, R. Rowland, and J. Whiteside, Effects of material and stacking sequence on behavior of composite plates with holes, Experimental Mechanics, vol.5, issue.6, pp.1-9, 1974.
DOI : 10.1007/BF02324853

G. Davi, Stress fields in general composite laminates, AIAA Journal, vol.34, issue.12, pp.2604-2608, 1996.
DOI : 10.2514/3.13445

P. Destuynder, E. Bonnet, E. Michelin, and B. Templier, Calcul des singularités de contraintes dans les effets de bord des matériaux composites multicouches, La recherche aérospatiale, vol.1, pp.47-66, 1988.

A. Diaz-diaz and J. F. Caron, Interface plasticity and delamination onset prediction, Mechanics of Materials, vol.38, issue.7, pp.6648-663, 2006.
DOI : 10.1016/j.mechmat.2005.12.001

S. Dong, K. Pister, and R. Taylor, On the Theory of Laminated Anisotropic Shell and Plates, Journal of Aeronautical Science, vol.29, pp.969-975, 1962.

L. Dufort, M. Grédic, and Y. Surrel, Experimental evidence of the cross-section warping in short composite beams under three point bending, Composites structures, pp.37-47, 2001.

B. A. El, V. Bartali, S. Aubin, and . Degallaix, Fatigue damage analysis in a duplex stainless steel by digital image correlation technique. Fatigue and fracture of Engineering materials and structures, pp.137-151, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00761463

E. S. Folias, Boundary layer effects of interlaminar stresses adjacent to a hole in a laminated composite plate, International Journal of Solids and Structures, vol.29, issue.2, pp.171-186, 1948.
DOI : 10.1016/0020-7683(92)90105-3

M. Grediac, The use of full-field measurement methods in composite material characterization: interest and limitations, Composites Part A: Applied Science and Manufacturing, vol.35, issue.7-8, pp.751-761, 2004.
DOI : 10.1016/j.compositesa.2004.01.019

A. Harris and O. Orringer, Investigation of Angle-Ply Delamination Specimen For Interlaminar Strength Test, Journal of Composite Materials, vol.1, issue.3, pp.285-299, 1978.
DOI : 10.1177/002199837801200306

C. T. Herakovich, On the relationship between engineering properties and delamination, Journal of Composite Materials, vol.15, pp.339-348, 1981.

C. T. Herakovich, D. Post, M. B. Buczek, and R. Czarnek, Free Edge Strain Concentrations in Real Composite Laminates: Experimental-Theoretical Correlation, Journal of Applied Mechanics, vol.52, issue.4, pp.787-793, 1985.
DOI : 10.1115/1.3169147

C. T. Herakovich, Edge effects and delamination failures, The Journal of Strain Analysis for Engineering Design, vol.16, issue.4, pp.248-252, 1989.
DOI : 10.1243/03093247V244245

C. T. Herakovich, Failure modes and damage accumulation in laminated composites with free edges, Composites Science and Technology, vol.36, issue.2, pp.105-119, 1989.
DOI : 10.1016/0266-3538(89)90082-1

F. Hild and S. Roux, Measuring stress intensity factors with a camera: Integrated digital image correlation (I-DIC), Comptes Rendus M??canique, vol.334, issue.1, pp.8-12, 2006.
DOI : 10.1016/j.crme.2005.11.002

URL : https://hal.archives-ouvertes.fr/hal-00322201

G. Isakson and A. Levy, Finite-Element Analysis of Interlaminar Shear in Fibrous Composites, Journal of Composite Materials, vol.5, issue.2, pp.273-276, 1971.
DOI : 10.1177/002199837100500215

R. Jones and C. Wykes, Holographic and speckle interferometry, 1983.

R. Y. Kim and S. R. Soni, Experimental and Analytical Studies On the Onset of Delamination in Laminated Composites, Journal of Composite Materials, vol.8, issue.3, pp.70-80, 1984.
DOI : 10.1177/002199838401800106

F. Lagattu, J. Brillaud, and M. C. , High strain gradient measurements by using digital image correlation technique, Materials Characterization, vol.53, issue.1, pp.17-28, 2004.
DOI : 10.1016/j.matchar.2004.07.009

F. Lagattu, M. C. Lafarie-frenot, T. Q. Lam, and J. Brillaud, Experimental characterisation of overstress accommodation in notched CFRP composite laminates, Composite Structures, vol.67, issue.3, pp.347-357, 2005.
DOI : 10.1016/j.compstruct.2004.01.016

T. Lamarque, Caractérisation du délaminage par interférométrie de Speckle à cisaillement avec sollicitation thermique ou mécanique, Thèse de doctorat de l'Université Paris 6, 1998.

]. D. Leg87, E. Leguillon, and . Sanchez-palencia, Effets de bords et singularités dans les matériaux composites, Annales des Composites, vol.1, pp.1-20, 1987.

D. Lévêque, Analyse de la tenue au délaminage des composites stratifies: identification d'un modèle d'interface interlaminaire, 1998.

D. Lévêque, C. Huchette, P. Paulmier, F. Laurin, and J. , Maire Mesures de champs et capitalisation d'expérience: application à l'analyse de la rupture de plaques composites trouées, pp.22-24, 2005.

T. Lorriot, G. Marion, R. Harry, and H. Wargnier, Onset of free-edge delamination in composite laminates under tensile loading, Composites Part B: Engineering, vol.34, issue.5, pp.459-471, 2003.
DOI : 10.1016/S1359-8368(03)00016-7

V. Magnier, Modélisation tridimensionnelle par éléments finis enrichis pour le calcul de singularités de délaminage et à la jonction de matériaux anisotropes, Thèse de doctorat de l'Université des Sciences et Technologies de Lille, 2008.

]. A. Mar03, R. Martinez, J. A. Rodriguez-vera, H. J. Rayas, and . Puga, Fracture detection by grating moiré and in-plane ESPI techniques, Optics and Lasers in Engineering, vol.39, pp.525-536, 2003.

C. Mittelstedt and W. Becker, Efficient computation of order and mode of three-dimensional stress singularities in linear elasticity by the boundary finite element method, International Journal of Solids and Structures, vol.43, issue.10, pp.2868-2903, 2006.
DOI : 10.1016/j.ijsolstr.2005.05.059

D. Nguyen-tien, Modélisation du délaminage des composites sous chargement complexe par élément métis, Thèse de doctorat de l, 2006.

D. Mollenhauer and K. Reifsnider, Measurements of interlaminar deformation along the cylindrical surface of a hole in laminated composite material by Moiré interferometry

A. Nosier and A. Bahrami, Interlaminar stresses in antisymmetric angle-ply laminates, Composite structures, pp.18-33, 2007.

T. K. O-'brien, Characterization of delamination onset and growth in a composite laminate, Damage in Composite Materials, K.L. Reifsnider editor, pp.140-167, 1980.

N. J. Pagano, The Influence of Stacking Sequence on Laminate Strength, Journal of Composite Materials, vol.5, issue.1, pp.50-57, 1971.
DOI : 10.1177/002199837100500105

N. J. Pagano, On the Calculation of Interlaminar Normal Stress in Composite Laminate, Journal of Composite Materials, vol.8, issue.1, pp.65-81, 1971.
DOI : 10.1177/002199837400800106

N. J. Pagano, Free edge stress fields in composite laminates, International Journal of Solids and Structures, vol.14, issue.5, pp.401-406, 1978.
DOI : 10.1016/0020-7683(78)90021-5

S. Pageau, P. Joseph, and J. S. Biggers, The order of stress singularities for bonded and disbanded three-mateiral junctions, Journal of Applied Mechanics, vol.31, pp.2979-2997, 1994.

F. Pierron, F. Alloba, Y. Surrel, and A. Vautrin, whole-field assessment of the effects of boundary conditions on the strain field in off-axis tensile testing of unidirectional composites, Composites Science and Technology, vol.58, issue.12
DOI : 10.1016/S0266-3538(98)00027-X

R. B. Pipes and N. J. Pagano, Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension, Journal of Composite Materials, vol.4, pp.538-548, 1970.
DOI : 10.1007/978-94-017-2233-9_19

R. B. Pipes and I. M. Daniel, Moire Analysis of the Interlaminar Shear Edge Effect in Laminated Composites, Journal of Composite Materials, vol.5, issue.2, pp.255-259, 1971.
DOI : 10.1177/002199837100500211

M. Prukvilailert and H. Koguchi, Stress singularity analysis around the singular point on the stress singularity line in three-dimensional joints, International Journal of Solids and Structures, vol.42, issue.11-12, pp.3059-3074, 2005.
DOI : 10.1016/j.ijsolstr.2004.10.027

M. Puyo-pain, F. Hild, and J. Lamon, M??thodes de mesures de champs et d'identification des propri??t??s ??lastiques par corr??lation d'images num??riques. Application ?? l'??tude d'un joint de brasure c??ramique, Revue des composites et des mat??riaux avanc??s, vol.15, issue.1, pp.19-31, 2005.
DOI : 10.3166/rcma.15.19-31

J. N. Reddy, Mechanics of laminated composite plates and shell, 2004.

J. P. Renault, D. Valentin, and J. Whiteside, Etude du comportement en traction et en compression de composites carbone-résine troués, Comptes Rendus des 6emes Journées Nationales sur les Composites, 1986.

]. B. Ros72 and . Rosen, A simple procedure for experimental determination of the longitudinal shear modulus of unidirectional composite, Journal of Composite Materials, vol.6, pp.552-554, 1972.

E. Rybicki, Approximate Three-Dimensional Solutions for Symmetric Laminates Under Inplane Loading, Journal of Composite Materials, vol.5, issue.3, pp.354-360, 1971.
DOI : 10.1177/002199837100500305

J. C. Schellenkens and R. De-borst, Free edge delamination in carbon-epoxy laminates: a novel numerical/experimental approach, Composite Structures, vol.28, issue.4, pp.357-373, 1994.
DOI : 10.1016/0263-8223(94)90118-X

L. Sohier, J. Y. Cognard, and P. Davies, Définition d'un essai pour analyser le comportement hors plan des assemblages composites, Comptes Rendus des 16emes Journées Nationales sur les Composites, 2009.

S. R. Soni and R. Y. Kim, Delamination of Composite Laminates Stimulated by Interlaminar Shear, Composite Materials: Testing and design (seventh conference), ASTM STP 893, pp.286-307, 1986.
DOI : 10.1520/STP35354S

P. Smigielski and H. Fagot, Application de l'holographie à la détection de défauts dans les structures. Revue Française de Mécanique, pp.57-67, 1982.

]. P. Smi01a and . Smigielski, Holographie optique, interferométrie holographique. Techniques de l'ingénieur, 2001.

P. Smigielski, Interferométrie de Speckle, Techniques de l'ingénieur, pp.6-331, 2001.

Y. Surrel, Methodes optiques pour la mesure de champs cinématiques: résolution et résolution spatiale XVeme Congrès Français de Mécanique, pp.3-7, 2001.

G. P. Tandon, R. Y. Kim, S. G. Warrier, and B. S. Manjundar, Influence of free edge and corner singularities on interfacial normal strength: application in model unidirectional composites, Composites Part B: Engineering, vol.30, issue.2, pp.115-134, 1999.
DOI : 10.1016/S1359-8368(98)00046-8

L. Toubal, M. Kamara, and B. Lorrain, Stress concentration in a circular hole in composite plate, Composite Structures, vol.68, issue.1, pp.31-36, 2005.
DOI : 10.1016/j.compstruct.2004.02.016

F. Touchard, M. C. Lafarie-frenot, and D. Guedra-degeorges, Mechanical behaviour characteristics of a thermoplastic composite used in structural components, Composites Science and Technology, vol.56, issue.7, pp.785-791, 1996.
DOI : 10.1016/0266-3538(96)00021-8

K. Triconnet, F. Hild, and D. Baptiste, Parameter choice for optimized digital image correlation, Optics and Lasers in Engineering, vol.47, issue.6, pp.728-737, 2009.
DOI : 10.1016/j.optlaseng.2008.10.015

URL : https://hal.archives-ouvertes.fr/hal-00334368

S. W. Tsai and H. T. Hahn, Introduction to composite materials, 1980.

A. S. Wang and F. W. Crossman, Some New Results on Edge Effect in Symmetric Composite Laminates, Journal of Composite Materials, vol.5, issue.1, pp.92-106, 1978.
DOI : 10.1177/002199837701100110

A. S. Wang, GROWTH MECHANISMS OF TRANSVERSE CRACKS AND PLY DELAMINATION IN COMPOSITE LAMINATES, Third International Conference on Composite Materials (ICCM3) Proceeding, pp.170-185, 1980.
DOI : 10.1016/B978-1-4832-8370-8.50017-6

Y. M. Xing, H. Yun, and F. L. Dai, An experimental study of failure mechanisms in laminates with dropped plies, Composites Science and Technology, vol.59, issue.10, pp.1527-1531, 1999.
DOI : 10.1016/S0266-3538(99)00003-2

L. R. Xu, H. Kuai, and S. Sengupta, Free-edge Stress Singularities and Edge Modifications for Fiber Pushout Experiments, Journal of Composite Materials, vol.55, issue.12, pp.1103-1124, 2005.
DOI : 10.1177/0021998305048742

H. Zende and Q. Yuwen, The study of fractal correlation in the displacement measurement and its application, Optics and laser in engieneering, pp.465-472, 2003.