J. P. Kleijnen, Kriging metamodeling in simulation: A review, European Journal of Operational Research, vol.192, issue.3, pp.707-716, 2009.
DOI : 10.1016/j.ejor.2007.10.013

D. Gorinevsky and G. Vukovich, Control of flexible spacecraft using nonlinear approximation of input shape dependence on reorientation maneuver parameters Control Engineering Practice, pp.967-066110020, 1997.

K. Chiang, Modeling and optimization of designing parameters for a parallel-plain fin heat sink with confined impinging jet using the response surface methodology, Applied Thermal Engineering, vol.27, issue.14-15, pp.14-15, 2007.
DOI : 10.1016/j.applthermaleng.2007.02.004

M. Xiao, P. Breitkopf, R. F. Coelho, C. Knopf-lenoir, M. Sidorkiewicz et al., Model reduction by CPOD and Kriging. Structural and Multidisciplinary Optimization, pp.10-1007, 2010.

E. Aggelogiannaki, H. Sarimveis, and D. , Koubogiannis, Model predictive temperature control in long ducts by means of a neural network approximation tool, Applied Thermal Engineering, vol.27, pp.14-15, 2007.

N. V. Queipo, R. T. Haftka, W. Shyy, T. Goel, R. Vaidyanathan et al., Surrogatebased analysis and optimization, Progress in Aerospace Sciences, 2005.

Y. Rouizi, Y. Favennec, M. Girault, and D. Petit, Model reduction on 2-D incompressible laminar flows: Application on the flow over a backward-facing step, 6th International Conference on Inverse Problems in Engineering : Theory and Practice, pp.10-1088, 2008.
DOI : 10.1088/1742-6596/135/1/012090

URL : https://hal.archives-ouvertes.fr/hal-00424151

Y. Rouizi, M. Girault, Y. Favennec, and D. Petit, Model reduction by the Modal Identification Method in forced convection: Application to a heated flow over a backward-facing step, International Journal of Thermal Sciences, vol.49, issue.8, 2010.
DOI : 10.1016/j.ijthermalsci.2010.02.011

M. Bergmann, C. Bruneau, and A. Iollo, Enablers for robust POD models, Journal of Computational Physics, vol.228, issue.2, pp.516-538, 2009.
DOI : 10.1016/j.jcp.2008.09.024

URL : https://hal.archives-ouvertes.fr/inria-00338203

B. Galletti, C. H. Bruneau, L. Zannetti, and A. Iollo, Low-order modelling of laminar flow regimes past a confined square cylinder, Journal of Fluid Mechanics, vol.503, pp.161-170, 2004.
DOI : 10.1017/S0022112004007906

A. E. Deane, I. G. Kevrekidis, G. E. Karniadakis, and S. A. , Orszag Low-dimensional models for complex geometry flows -Application to grooved channels and circular cylinders, Physics of Fluids A, vol.31, pp.10-1063857881, 1991.

S. Sirisup and G. E. Karniadakis, A spectral viscosity method for correcting the long-term behavior of POD models, Journal of Computational Physics, vol.194, issue.1
DOI : 10.1016/j.jcp.2003.08.021

J. Liu, J. Liu, and R. L. Pego, Stable and accurate pressure approximation for unsteady incompressible viscous flow, Journal of Computational Physics, vol.229, issue.9
DOI : 10.1016/j.jcp.2010.01.010

J. Laurenceau, Surfaces de réponse par krigeage pour l'optimisation de formes aérodynamiques, Thèse de Doctorat, Institut National Polytechnique de, 2008.

I. Das and J. E. Dennis, Normal-Boundary Intersection: A New Method for Generating the Pareto Surface in Nonlinear Multicriteria Optimization Problems, SIAM Journal on Optimization, vol.8, issue.3, pp.631-6571052, 1998.
DOI : 10.1137/S1052623496307510

J. Laurenceau and P. Sagaut, Building Efficient Response Surfaces of Aerodynamic Functions with Kriging and Cokriging, AIAA Journal, vol.46, issue.2, pp.1-1452498
DOI : 10.2514/1.32308

J. Yu, P. Goos, and M. Vandebroek, Comparing different sampling schemes for approximating the integrals involved in the efficient design of stated choice experiments, Press, Corrected Proof, Disponible en ligne au 19 Mars, 2010.
DOI : 10.1016/j.trb.2010.02.005

M. Girault, Résolution de problèmes inverses en thermique par modèles réduits : applications en conduction non-linéaire et en convection forcée, Thèse de Doctorat, 2003.

O. Balima, Réduction de modèle non linéaire par identification modale : application en thermique et comparaison avec la méthode POD-Galerkin, Thèse de Doctorat, 2006.

J. Dreo and A. Pétrowsk, Métaheuristiques pour l'optimisation difficile. Livre, Editions Eyrolles, 2005.

D. Levine, Users guide to the PGAPack parallel genetic algorithm library, Argonne National Library, 1996.
DOI : 10.2172/366458

M. Clerc, L'optimisation par essaim particulaire. Livre, Editions Hermes-Lavoisier, 2005.

Y. Rouizi, Réduction de modèle par identification en convection forcée pour des systèmes soumis à des conditions aux limites instationnaires : application à l'écoulement le long d'une marche avec contrôle thermique par retour d'état, Thèse de Doctorat, Ecole Nationale, 2010.

R. De-modèle-en-Écoulement-quasi-transitoire and .. , 135 4.6.2 Utilisation de modèles réduits et de surfaces de réponse dans le cadre d'écoulements stationnaires, p.136

C. H. Williamson, Vortex Dynamics in the cylinder wake Annual Review of Fluid Mechanics, pp.477-539, 1996.

E. Achenbach, Distribution of local pressure and skin friction around a circular cylinder in cross-flow up to Re = 5 ?? 10 6, Journal of Fluid Mechanics, vol.8, issue.04, pp.625-63910, 1968.
DOI : 10.1017/S0022112068002120

C. Norberg and B. Sundén, Turbulence and reynolds number effects on the flow and fluid forces on a single cylinder in cross flow, Journal of Fluids and Structures, vol.1, issue.3, pp.10-1016, 1987.
DOI : 10.1016/0889-9746(87)90264-7

C. H. Williamson, Defining a universal and continuous Strouhal???Reynolds number relationship for the laminar vortex shedding of a circular cylinder, Physics of Fluids, vol.31, issue.10, 1988.
DOI : 10.1063/1.866978

J. F. Olsen and S. Rajagopalan, Vortex shedding behind modified circular cylinders, Journal of Wind Engineering and Industrial Aerodynamics, vol.86, issue.1, pp.167-610500003, 2000.
DOI : 10.1016/S0167-6105(00)00003-9

T. Leweke and C. H. Williamson, Three-dimensional instabilities in wake transition Issue 4, Special Issue Dynamics and Statistics of Concentrated Vortices in Turbulent Flow, European Journal of Mechanics B/FluidsEuromech Colloquium, vol.17, issue.36498, pp.10-1016, 1998.

M. Thompson, K. Hourigan, and J. Sheridan, Three-dimensional instabilities in the wake of a circular cylinder. Experimental Thermal and Fluid Science, pp.894-177700098, 1996.

P. W. Bearman, Near wake flows behind two-and three-dimensional bluff bodies Journal of Wind Engineering and Industrial Aerodynamics, Volumes 69-71, Proceedings of the 3rd International Colloqium on Bluff Body Aerodynamics and Applications, pp.10-1016, 1997.

M. C. Thomson, K. Hourigan, K. Ryan, and G. J. Sheard, Wake transition of two-dimensional cylinders and axisymmetric bluff bodies, Bluff Body Wakes and Vortex-Induced Vibrations (BBVIV-4), pp.6-7, 2006.

A. Roshko, Perspectives on bluff body aerodynamics, Journal of Wind Engineering and Industrial Aerodynamics, vol.49, issue.1-3, pp.10-1016, 1993.
DOI : 10.1016/0167-6105(93)90007-B

H. G. Park, A study of heat transport processes in the wake of a stationary and oscillating circular cylinder using digital particle image velocimetry/thermometry, pp.4132004-150955, 1998.

M. Ren, 3D Flow transition behind a heated cylinder, 2005.

E. Achenbach, Total and local heat transfer from a smooth circular cylinder in cross-flow at high reynolds number, International Journal of Heat and Mass Transfer, vol.18, issue.12, pp.1387-13960017, 1975.
DOI : 10.1016/0017-9310(75)90252-5

M. Matsumura and R. A. Antonia, Momentum and heat transport in the turbulent intermediate wake of a circular cylinder, Journal of Fluid Mechanics, vol.206, issue.-1, pp.651-66810, 1993.
DOI : 10.1063/1.864048

H. Nakamura and T. Igarashi, Variation of Nusselt number with flow regimes behind a circular cylinder for Reynolds numbers from 70 to 30 000, International Journal of Heat and Mass Transfer, vol.47, issue.23, 2004.

H. Nakamura and T. Igarashi, Heat Transfer in Separated Flow behind a Circular Cylinder for Reynolds Numbers from 120 to 30000 (2nd Report, Unsteady and Three-Dimensional Characteristics), JSME International Journal Series B, vol.47, issue.3, pp.622-630, 2004.
DOI : 10.1299/jsmeb.47.622

A. Wang, Z. Trávní?ek, and K. Chia, On the relationship of effective Reynolds number and Strouhal number for the laminar vortex shedding of a heated circular cylinder, Physics of Fluids, vol.12, issue.6, pp.1401-1410, 2000.
DOI : 10.1063/1.870391

A. Wang and Z. Trávní?ek, On the linear heat transfer correlation of a heated circular cylinder in laminar crossflow using a new representative temperature concept, International Journal of Heat and Mass Transfer, vol.44, issue.24, pp.10-1016, 2001.
DOI : 10.1016/S0017-9310(01)00103-X

T. Vít, M. Ren, Z. Trávní?ek, F. Mar?ik, and C. C. Rindt, The influence of temperature gradient on the Strouhal-Reynolds relationship for water and air. Experimental Thermal and Fluid Science, 2007.

C. F. Lange, F. Durst, and M. Breuer, Momentum and heat transfer from cylinders in laminar crossflow at 10???4 ??? Re ??? 200, International Journal of Heat and Mass Transfer, vol.41, issue.22, pp.10-1016, 1998.
DOI : 10.1016/S0017-9310(98)00077-5

M. Sabanca, On wave harmonics of heated circular cylinders. Computers & Fluids, 2007.

N. Zhang, Z. C. Zheng, and S. Eckels, Study of heat-transfer on the surface of a circular cylinder in flow using an immersed-boundary method, International Journal of Heat and Fluid Flow, vol.29, issue.6, 1558.
DOI : 10.1016/j.ijheatfluidflow.2008.08.009

F. Kreith and R. F. Boehm, Heat and Mass Transfer (Book) Mechanical Engineering Handbook, 1999.

V. Kolar, Vortex identification : New requirements and limitations Including Special Issue of Conference on Modelling Fluid Flow (CMFF'06), Budapest, 13th event of the international conference series in fluid flow technologies : conference on modelling fluid flow, International Journal of Heat and Fluid Flow, vol.28, issue.4, 2007.

Y. Rouizi, M. Girault, Y. Favennec, and D. Petit, Model reduction by the Modal Identification Method in forced convection: Application to a heated flow over a backward-facing step, International Journal of Thermal Sciences, vol.49, issue.8, 2010.
DOI : 10.1016/j.ijthermalsci.2010.02.011

C. H. Williamson, Three-dimensional wake transition, Journal of Fluid Mechanics, vol.8, issue.-1, pp.345-40710, 1996.
DOI : 10.1063/1.868942

B. Galletti, A. Bottaro, C. Bruneau, and A. Iollo, Accurate model reduction of transient and forced wakes, European Journal of Mechanics - B/Fluids, vol.26, issue.3, 2007.
DOI : 10.1016/j.euromechflu.2006.09.004

URL : https://hal.archives-ouvertes.fr/hal-00262163

P. Mokhasi and D. Rempfer, Sequential estimation of velocity fields using episodic proper orthogonal decomposition, Physica D: Nonlinear Phenomena, vol.237, issue.24, p.15
DOI : 10.1016/j.physd.2008.08.004

M. Bergmann, C. Bruneau, and A. Iollo, Enablers for robust POD models, Journal of Computational Physics, vol.228, issue.2, pp.516-538, 2009.
DOI : 10.1016/j.jcp.2008.09.024

URL : https://hal.archives-ouvertes.fr/inria-00338203

S. Sirisup and G. E. Karniadakis, A spectral viscosity method for correcting the long-term behavior of POD models, Journal of Computational Physics, vol.194, issue.1
DOI : 10.1016/j.jcp.2003.08.021

A. E. Deane and C. , Mavriplis, Low-Dimensional Description of the Dynamics in Separated Flow Past Thick Airfoils, AIAA Journal, vol.32, issue.6, 1994.

M. Souli and J. Sigrist, Interaction fluide-structure -Modélisation et simulation numérique, Editions Hermès-Lavoisier, vol.13, pp.978-980, 2009.

B. Galletti, C. H. Bruneau, L. Zannetti, and A. Iollo, Low-order modelling of laminar flow regimes past a confined square cylinder, Journal of Fluid Mechanics, vol.503, pp.161-170, 2004.
DOI : 10.1017/S0022112004007906

A. E. Deane, I. G. Kevrekidis, G. E. Karniadakis, and S. A. , Orszag Low-dimensional models for complex geometry flows -Application to grooved channels and circular cylinders, Physics of Fluids A, vol.31, pp.10-1063857881, 1991.

P. S. Johansson, H. I. Andersson, and E. M. Ronquist, Reduced-basis modeling of turbulent plane channel flow, Computers & Fluids, vol.35, issue.2, 2006.
DOI : 10.1016/j.compfluid.2004.11.005

M. Couplet, Modélisation pod-Galerkine réduite pour le contrôle des écoulements instationnaires, 2005.

M. Couplet, C. Basdevant, and P. Sagaut, Calibrated reduced-order POD-Galerkin system for fluid flow modelling, Journal of Computational Physics, vol.207, issue.1, 2005.
DOI : 10.1016/j.jcp.2005.01.008

T. Bui-thanh, K. Willcox, O. Ghattas, and B. Van-bloemen-waanders, Goal-oriented, model-constrained optimization for reduction of large-scale systems, Journal of Computational Physics, vol.224, issue.2, pp.880-896, 2007.
DOI : 10.1016/j.jcp.2006.10.026

K. C. Hall, E. H. Dowell, and J. P. Thomas, Proper Orthogonal Decomposition Technique for Transonic Unsteady Aerodynamic Flows, AIAA Journal, vol.38, issue.10, 1853.
DOI : 10.2514/3.14622

B. I. Epureanu, K. C. Hall, and E. H. Dowell, REDUCED-ORDER MODELS OF UNSTEADY VISCOUS FLOWS IN TURBOMACHINERY USING VISCOUS???INVISCID COUPLING, Journal of Fluids and Structures, vol.15, issue.2, 2001.
DOI : 10.1006/jfls.2000.0334

R. Romijn, L. Ozkan, S. Weiland, J. Ludlage, and W. Marquardt, A grey-box modeling approach for the reduction of nonlinear systems, Selected Papers From Two Joint Conferences : 8th International Symposium on Dynamics and Control of Process Systems and the 10th Conference Applications in Biotechnology , 8th International Symposium on Dynamics and Control of Process Systems and the 10th Conference Applications in Biotechnology, pp.906-914, 2008.
DOI : 10.1016/j.jprocont.2008.06.007

E. Balsa-canto, J. R. Banga, and A. A. Alonso, A novel, efficient and reliable method for thermal process design and optimization. Part I: theory, Journal of Food Engineering, vol.52, issue.3, pp.260-877400110, 2002.
DOI : 10.1016/S0260-8774(01)00110-8

E. Balsa-canto, J. R. Banga, and A. A. Alonso, A novel, efficient and reliable method for thermal process design and optimization. Part II: applications, Journal of Food Engineering, vol.52, issue.3, pp.235-247, 2002.
DOI : 10.1016/S0260-8774(01)00111-X

M. Girault and D. Petit, Resolution of linear inverse forced convection problems using model reduction by the Modal Identification Method: application to turbulent flow in parallel-plate duct, International Journal of Heat and Mass Transfer, vol.47, issue.17-18, pp.17-18, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2004.04.001

URL : https://hal.archives-ouvertes.fr/hal-00132596

O. Balima, Réduction de modèle non linéaire par identification modale : application en thermique et comparaison avec la méthode POD-Galerkin, Thèse de Doctorat, 2006.

M. Girault, Résolution de problèmes inverses en thermique par modèles réduits : applications en conduction non-linéaire et en convection forcée, Thèse de Doctorat, 2003.

D. Alonso, A. Velazquez, and J. M. Vega, A method to generate computationally efficient reduced order models, Computer Methods in Applied Mechanics and Engineering, vol.198, issue.33-36, 2009.
DOI : 10.1016/j.cma.2009.03.012

J. Rambo and Y. Joshi, Reduced-order modeling of turbulent forced convection with parametric conditions, International Journal of Heat and Mass Transfer, vol.50, issue.3-4, pp.3-4, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2006.07.029

Y. Jaluria, Simulation-based optimization of thermal systems Applied Thermal Engineering Selected Papers from the 10th UK National Heat Transfer Conference, 1346.

Y. Rouizi, Y. Favennec, J. Ventura, and D. Petit, Numerical model reduction of 2D steady incompressible laminar flows: Application on the flow over a backward-facing step, Journal of Computational Physics, vol.228, issue.6, 2009.
DOI : 10.1016/j.jcp.2008.12.001

URL : https://hal.archives-ouvertes.fr/hal-00423071

.. Modélisation-de-l-'écoulement-et-structure-du-modèle-réduit, 166 5.2.1 Equations de Navier-Stokes pour un écoulement compressible, p.167

S. Jakirlic, B. Eisfeld, R. Jester-zurker, and N. Kroll, Near-wall, Reynolds-stress model calculations of transonic flow configurations relevant to aircraft aerodynamics, International Journal of Heat and Fluid Flow, vol.28, issue.4, pp.602-615, 2007.
DOI : 10.1016/j.ijheatfluidflow.2007.04.001

T. Chantrasmi, A. Doostan, and G. Iaccarino, Pad?????Legendre approximants for uncertainty analysis with discontinuous response surfaces, Journal of Computational Physics, vol.228, issue.19, 2009.
DOI : 10.1016/j.jcp.2009.06.024

D. J. Lucia, P. S. Beran, and W. A. Silva, Reduced-order modeling: new approaches for computational physics, Progress in Aerospace Sciences, 2004.
DOI : 10.1016/j.paerosci.2003.12.001

J. Laurenceau and P. Sagaut, Building Efficient Response Surfaces of Aerodynamic Functions with Kriging and Cokriging, AIAA Journal, vol.46, issue.2, pp.1-1452498, 2008.
DOI : 10.2514/1.32308

C. Praveen and R. Duvigneau, Low cost PSO using metamodels and inexact pre-evaluation: Application to aerodynamic shape design, Computer Methods in Applied Mechanics and Engineering, vol.198, issue.9-12, pp.9-12, 2009.
DOI : 10.1016/j.cma.2008.11.019

K. C. Giannakoglou, Design of optimal aerodynamic shapes using stochastic optimization methods and computational intelligence Progress in Aerospace Sciences, pp.43-76, 2002.

A. Qamar and S. Sanghi, Steady supersonic flow-field predictions using proper orthogonal decomposition technique. Computers & Fluids, 2009.

D. J. Lucia, P. I. King, and P. S. Beran, Reduced order modeling of a two-dimensional flow with moving shocks, Computers & Fluids, vol.32, issue.7, pp.45-793000035, 2003.
DOI : 10.1016/S0045-7930(02)00035-X

B. I. Epureanu, E. H. Dowell, and K. C. Hall, REDUCED-ORDER MODELS OF UNSTEADY TRANSONIC VISCOUS FLOWS IN TURBOMACHINERY, Journal of Fluids and Structures, vol.14, issue.8, 2000.
DOI : 10.1006/jfls.2000.0320

Z. Xiaoping, D. Jifeng, L. Weiji, and Z. Yong, Robust Airfoil Optimization with Multiobjective Estimation of Distribution Algorithm, Chinese Journal of Aeronautics, vol.21, issue.408, pp.1000-936160038, 2008.