95 3.3.1 Compression monotone en matrice ou isotrope 95 3.3.2 Modification d'une surface de charge par changement de direction du chemin de chargement, p.98 ,
The yield behaviour of metal powders, International Journal of Mechanical Sciences, vol.39, issue.12, pp.1315-1324, 1997. ,
DOI : 10.1016/S0020-7403(97)00018-0
The influence of an increasing particle coordination on the densification of spherical powders, Acta Metallurgica, vol.30, issue.10, pp.1883-1890, 1982. ,
DOI : 10.1016/0001-6160(82)90028-1
3D computational modeling of powder compaction processes using a three-invariant hardening cap plasticity model, Finite Elements in Analysis and Design, vol.42, issue.8-9, pp.792-807, 2006. ,
DOI : 10.1016/j.finel.2006.01.011
Three-dimensional discrete element models for the granular statics and dynamics of powders in cavity filling, Journal of the Mechanics and Physics of Solids, vol.57, issue.1, pp.10-31, 2009. ,
DOI : 10.1016/j.jmps.2008.10.006
An analysis of fully plastic Brinell indentation, Journal of the Mechanics and Physics of Solids, vol.43, issue.8, pp.1303-1333, 1995. ,
DOI : 10.1016/0022-5096(95)00031-D
Triangulations in CGAL, Computational Geometry, vol.22, issue.1-3, pp.5-19, 2002. ,
DOI : 10.1016/S0925-7721(01)00054-2
URL : https://hal.archives-ouvertes.fr/hal-01179408
A constitutive model for compaction of granular media, with account for deformation induced anisotropy, Mechanics of Cohesive-Frictional Materials, pp.391-418, 1999. ,
DOI : 10.1002/(SICI)1099-1484(199907)4:4<391::AID-CFM68>3.0.CO;2-0
Contribution à la modélisation de la compression des poudres par une méthode d'éléments discrets maillés, Thèse de doctorat, 2008. ,
Numerical simulation of cold compaction of 3d granular packings, Materials Science Forum, pp.534-536301, 2006. ,
Experiment and simulation using meshed discrete particles : comparison for compaction of, 2008. ,
Modeling of the metal powder compaction process using the cap model. Part II: Numerical implementation and practical applications, International Journal of Solids and Structures, vol.39, issue.4, pp.1077-1096, 2002. ,
DOI : 10.1016/S0020-7683(01)00256-6
A discrete numerical model for granular assemblies, G??otechnique, vol.29, issue.1, pp.47-65, 1979. ,
DOI : 10.1680/geot.1979.29.1.47
SANICLAY: simple anisotropic clay plasticity model, International Journal for Numerical and Analytical Methods in Geomechanics, vol.112, issue.12, pp.1231-1257, 2006. ,
DOI : 10.1002/nag.524
URL : http://dspace.lib.ntua.gr/handle/123456789/17544
Advances in discrete element method applied to soil, rock and concrete mechanics, in : State of the art of geotechnical engineering, Electronic Journal of Geotechnical Engineering, p.44, 2009. ,
Soil mechanics and work-hardening theories of plasticity, Transactions ASCE, vol.122, pp.338-346, 1957. ,
Soil mechanics and plastic analysis or limit design, Quarterly of Applied Mathematics, vol.10, issue.2, pp.157-175, 1952. ,
DOI : 10.1090/qam/48291
Identification procedure of a hardening law for powder compaction, Powder Technology, vol.157, issue.1-3, pp.183-190, 2005. ,
DOI : 10.1016/j.powtec.2005.05.030
URL : https://hal.archives-ouvertes.fr/hal-00373876
Densification of Powders by Particle Deformation, Powder Metallurgy, vol.10, issue.2, pp.82-90, 1983. ,
DOI : 10.1111/j.1151-2916.1963.tb11771.x
On the cold compaction of powders, Journal of the Mechanics and Physics of Solids, vol.43, issue.9, pp.1409-1431, 1995. ,
DOI : 10.1016/0022-5096(95)00039-L
Yielding of metal powder bonded by isolated contacts, Journal of the Mechanics and Physics of Solids, vol.40, issue.5, pp.1139-1162, 1992. ,
DOI : 10.1016/0022-5096(92)90064-9
Modélisation et simulation de la compression en matrice de poudres métalliques, Thèse de doctorat, 2002. ,
An efficient finite/discrete element procedure for simulating compression of 3D particle assemblies, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.49-50, pp.4266-4272, 2008. ,
DOI : 10.1016/j.cma.2008.05.002
Compression mechanics of granule beds: A combined finite/discrete element study, Chemical Engineering Science, vol.65, issue.8, pp.2464-2471, 2010. ,
DOI : 10.1016/j.ces.2009.12.029
Calculation of protein volumes: An alternative to the Voronoi procedure, Journal of Molecular Biology, vol.161, issue.2, pp.305-322, 1982. ,
DOI : 10.1016/0022-2836(82)90155-3
Characterisation of models of multicomponent amorphous metals: The radical alternative to the Voronoi polyhedron, Journal of Non-Crystalline Solids, vol.50, issue.3, pp.313-329, 1982. ,
DOI : 10.1016/0022-3093(82)90093-X
Finite element simulation in metal powder die compaction, Metal Powder Report, vol.47, issue.10, p.53, 1992. ,
DOI : 10.1016/0026-0657(92)91927-C
A discrete deformable element approach for the compaction of powder systems, Modelling and Simulation in Materials Science and Engineering, vol.11, issue.1, pp.101-114, 2003. ,
DOI : 10.1088/0965-0393/11/1/308
Numerical comparison of a deformable discrete element model and an equivalent continuum analysis for the compaction of ductile porous material, Computers & Structures, vol.79, issue.13, pp.1287-1294, 2001. ,
DOI : 10.1016/S0045-7949(01)00015-3
A two dimensional combined discrete and finite element scheme for simulating the flow and compaction of systems comprising irregular particulates, Computer Methods in Applied Mechanics and Engineering, vol.195, issue.41-43, pp.5552-5565, 2006. ,
DOI : 10.1016/j.cma.2005.10.025
FEM-DEM models for high-density compaction of ductile powders, 2010. ,
Extended yield condition of soils with tensile yield strength and rotational hardening, International Journal of Plasticity, vol.23, issue.12, pp.1939-1956, 2007. ,
DOI : 10.1016/j.ijplas.2007.07.011
Cold plastic compaction of powders by a network model, Journal of the Mechanics and Physics of Solids, vol.49, issue.9, pp.2031-2054, 2001. ,
DOI : 10.1016/S0022-5096(01)00038-2
The mathematical theory of plasticity, 1950. ,
A Theoretical Study of the Brinell Hardness Test, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.423, issue.1865, pp.301-330, 1989. ,
DOI : 10.1098/rspa.1989.0056
Rotational kinematic hardening model for sand. Part II Characteristic work hardening law and predictions, Computers and Geotechnics, vol.21, issue.3, pp.217-234, 1997. ,
DOI : 10.1016/S0266-352X(97)00023-2
Micro-deformation mechanism of shear banding process based on modified distinct element method, Powder Technology, vol.109, issue.1-3, pp.192-205, 2000. ,
DOI : 10.1016/S0032-5910(99)00236-3
Particle Deformation During Cold Isostatic Pressing of Metal Powders, Powder Metallurgy, vol.7, issue.4, pp.199-204, 1977. ,
DOI : 10.1179/pom.1977.20.1.21
Modélisation de la compression haute densité des poudres métalliques ductiles par la méthode des éléments discrets, Thèse de doctorat, 2010. ,
Numerical Simulations of Isostatic and Die Compaction of Powder by The Discrete Element Method, AIP Conference Proceedings, 2010. ,
DOI : 10.1063/1.3179961
A geometric algorithm based on tetrahedral meshes to generate a dense polydisperse sphere packing, Granular Matter, vol.63, issue.108, pp.43-52, 2009. ,
DOI : 10.1007/s10035-008-0116-0
Packing spherical discrete elements for large scale simulations, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.25-28, pp.25-281668, 2010. ,
DOI : 10.1016/j.cma.2010.01.016
The correlation of indentation experiments, Journal of the Mechanics and Physics of Solids, vol.18, issue.2, pp.115-126, 1970. ,
DOI : 10.1016/0022-5096(70)90029-3
Contact Mechanics, 1985. ,
Modelling and numerical investigation of the residual stress state in a green metal powder body, Powder Technology, vol.155, issue.3, pp.196-208, 2005. ,
DOI : 10.1016/j.powtec.2005.05.056
Crack detection using acoustic testing technology, Proceedings of the Euro PM2008, pp.109-114, 2008. ,
A new open-source software developed for numerical simulations using discrete modeling methods, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.49-50, pp.4429-4443, 2008. ,
DOI : 10.1016/j.cma.2008.05.023
YADE???OPEN DEM: an open???source software using a discrete element method to simulate granular material, Engineering Computations, vol.26, issue.7, pp.26-7786, 2009. ,
DOI : 10.1108/02644400910985170
Rotational kinematic hardening model for sand. Part I concept of rotating yield and plastic potential surfaces, Computers and Geotechnics, vol.21, issue.3, pp.183-216, 1997. ,
DOI : 10.1016/S0266-352X(97)00022-0
Théorie de l'élasticité, 1967. ,
Analysis of cold and hot isostatic compaction of spherical particles, Acta Materialia, vol.44, issue.9, pp.3655-3666, 1996. ,
DOI : 10.1016/1359-6454(96)00003-1
Plasticity Theory, Journal of Applied Mechanics, vol.59, issue.1, 2006. ,
DOI : 10.1115/1.2899459
Elasticity, fracture and yielding of cold compacted metal powders, Journal of the Mechanics and Physics of Solids, vol.52, issue.8, pp.1691-1717, 2004. ,
DOI : 10.1016/j.jmps.2004.03.004
Study of the cold compaction of composite powders by the discrete element method, Acta Materialia, vol.51, issue.2, pp.373-386, 2003. ,
DOI : 10.1016/S1359-6454(02)00402-0
Study of particle rearrangement during powder compaction by the Discrete Element Method, Journal of the Mechanics and Physics of Solids, vol.51, issue.4, pp.667-693, 2003. ,
DOI : 10.1016/S0022-5096(02)00101-1
Shear cracking in an Al powder compact studied by X-ray microtomography, Materials Science and Engineering: A, vol.508, issue.1-2, pp.64-70, 2009. ,
DOI : 10.1016/j.msea.2009.02.009
Spherical indentation of elastic-plastic solids, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.455, issue.1987, pp.2707-2728, 1999. ,
DOI : 10.1098/rspa.1999.0423
Frictionless indentation of dissimilar elastic???plastic spheres, International Journal of Solids and Structures, vol.37, issue.46-47, pp.7071-7091, 2000. ,
DOI : 10.1016/S0020-7683(99)00328-5
Experimental Inspiration for Kinematic Hardening Soil Models, Journal of Engineering Mechanics, vol.130, issue.6, pp.656-664, 2004. ,
DOI : 10.1061/(ASCE)0733-9399(2004)130:6(656)
A Rotational Hardening Constitutive Model for Anisotropically Consolidated Clay., SOILS AND FOUNDATIONS, vol.36, issue.3, pp.13-20, 1996. ,
DOI : 10.3208/sandf.36.3_13
Yield Function for Soil with Anisotropic Fabric, Journal of Engineering Mechanics, vol.115, issue.1, pp.89-104, 1989. ,
DOI : 10.1061/(ASCE)0733-9399(1989)115:1(89)
Caractérisation du comportement d'une poudre de fer pour le procédé de compression en matrice, Thèse de doctorat, 1998. ,
Triaxial characterisation of iron powder behaviour, Powder Metallurgy, vol.35, issue.3, pp.345-352, 1999. ,
DOI : 10.1016/S0020-7403(97)00018-0
Compaction of aggregated ceramic powders: From contact laws to fracture and yield surfaces, Powder Technology, vol.198, issue.2, pp.240-250, 2010. ,
DOI : 10.1016/j.powtec.2009.11.013
URL : https://hal.archives-ouvertes.fr/hal-00468059
A spherical discrete element model: calibration procedure and incremental response, Granular Matter, vol.20, issue.3, pp.11-5293, 2009. ,
DOI : 10.1007/s10035-009-0130-x
Plastic behaviour of green powder metallurgical compacts, Material Science Forum, pp.534-536305, 2007. ,
Simulation of multi-axial compaction of granular media from loose to high relative densities, Journal of the Mechanics and Physics of Solids, vol.53, issue.7, pp.1523-1551, 2005. ,
DOI : 10.1016/j.jmps.2005.02.007
Modélisation numérique en science et génie des matériaux, 1998. ,
Numerical homogenisation of elasto-plastic granule assemblies using discretised particles, Proceedings of the Euro PM2008, pp.169-173, 2008. ,
Experimental investigation of yield behaviour of metal powder compacts, Powder Metallurgy, vol.24, issue.2, pp.237-245, 2002. ,
DOI : 10.1115/1.1339003
On discrete element modelling of compaction of powders with size ratio, Computational Materials Science, vol.31, issue.1-2, pp.131-146, 2004. ,
DOI : 10.1016/j.commatsci.2004.02.005
Yield behaviour of cold compacted composite powders, Acta Materialia, vol.48, issue.13, pp.3341-3352, 2000. ,
DOI : 10.1016/S1359-6454(00)00151-8
Similarity analysis of inelastic contact, International Journal of Solids and Structures, vol.34, issue.24, pp.3061-3083, 1997. ,
DOI : 10.1016/S0020-7683(96)00176-X
The viscoplastic compaction of composite powders, Journal of the Mechanics and Physics of Solids, vol.47, issue.4, pp.785-815, 1999. ,
DOI : 10.1016/S0022-5096(98)00076-3
The hardness of metals, 1951. ,
An accurate and efficient tangential force???displacement model for elastic frictional contact in particle-flow simulations, Mechanics of Materials, vol.31, issue.4, pp.235-269, 1999. ,
DOI : 10.1016/S0167-6636(98)00064-7
Normal and tangential force???displacement relations for frictional elasto-plastic contact of spheres, International Journal of Solids and Structures, vol.38, issue.36-37, pp.6455-6489, 2001. ,
DOI : 10.1016/S0020-7683(01)00065-8
An anisotropic elastoplastic model for soft clays, Canadian Geotechnical Journal, vol.40, issue.2, pp.403-418, 2003. ,
DOI : 10.1139/t02-119
Experimental and numerical investigations of powder transfer, Powder Technology, vol.138, issue.2-3, pp.216-228, 2003. ,
DOI : 10.1016/j.powtec.2003.09.011
Micromechanical analysis of kinematic hardening in natural clay, International Journal of Plasticity, vol.25, issue.8, pp.1413-1435, 2009. ,
DOI : 10.1016/j.ijplas.2008.11.009
URL : https://hal.archives-ouvertes.fr/hal-01007036