]. S. Ali, J. M. Jennings, L. M. Phinney-andersen, and E. Riggaard, Temperature dependence for in-use stiction of polycrystalline silicon MEMS cantilevers Static and dynamic performance of stacked multilayer actuators based on hard and soft PZT, Sensors and Actuators A 113 Seventh International Conference on New Actuators, pp.60-70423, 2000.

F. Andersen, S. Jensen, K. Ouchouche-andrei, M. Krupa, ?. Józwik et al., Reliability of piezoelectric actuators at extreme operating conditions Fabrication, characterisation and reliability study of AlN-driven cantilevers, Proceedings of SPIE 6188, pp.64-67196, 2004.

]. A. Andrei, K. Krupa, P. Delobelle, L. Hirsinger, C. Gorecki et al., AlN as an actuation material for mems; the case of AlN driven cantilevers, Eurosensors Proceedings, pp.17-20, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00160150

A. , ]. A. Andrei, K. Krupa, M. Józwik, P. Delobelle et al., Process optimization and reliability study concerning the use of piezoelectric Aluminium Nitride films as actuation layers in MEMS Fabrication, caractérisation et modélisation de micropoutres multimorphes intégrant un film piézoelectrique d'AlN comme actionneur, pp.267-278, 2006.

A. , ]. A. Andrei, K. Krupa, ?. Nieradko, C. Gorecki et al., Opto -Mechanical Reliability Studies of ALN driven cantilevers AlN as an actuation material for MEMS applications: The case of AlN driven multilayered cantilevers Structure and morphology evolution of AlN films grown by DC sputtering, Sensors and Actuators A 141 Micromachnining ? Introduction " , Part 1 in " Microengineering, MEMS, and Interfacing. A Practical Guide, pp.539-540565, 2004.

M. Microengineering and I. , Photolithography A Practical Guide, Microengineering, MEMS, and Interfacing. A Practical Guide, 2006.

]. R. Beck, M. Van-uffelen, S. Eve, E. Ernst, A. Last et al., Technologia krzemowa Reliability studies of microoptical components in NEMO Network of Excellence in Microoptics Reliability of Optical Components ? An Introduction, Proceedings of SPIE 6193 NEMO SUMMER SCHOOL Micro-Optics Measurement and Characterisation, pp.61930-61931, 1991.

]. A. Birolini, Reliability Engineering ?Theory and Practice, 2004.

]. M. Bobji and S. K. Biswas, Hardness of a surface containing uniformly spaced pyramidal asperities, pp.51-56, 1999.

]. S. Boeshore, Aluminium Nitride Thin Films on Titanium: Piezoelectric Transduction on a Metal Substrate, 2006.

]. A. Bosseboeuf-2007, S. Bosseboeuf, &. Taylor, M. Francis-group, S. Brissaud et al., Interference microscopy techniques for microsystem characterization Modelling of a cantilever non-symmetric piezoelectric bimorph Material Reliability in MEMS Devices The elastic constants of sputtered aluminium nitride films Piezoelectric properties of PZT films for microcantilever Electromechanical Analysis of an Asymmetric Piezoelectric / Elastic Laminate Structure: Theory and Experiment MEMS for Telecommunications: Devices and Reliability AlN/silicon lamb-wave microsensors for pressure and gravimetric measurements, CRC TRANSDUCERS'97 International Conference on Solid State Sensors and Actuators 1 Sensors and Actuators A 46-47, pp.832-844591, 1995.

]. A. Delafargue-2004, F. J. Delafargue, and . Ulm, Explicit approximations of the indentation modulus of elastically orthotropic solids for conical indenters, International Journal of Solids and Structures, vol.41, issue.26, pp.7351-7360, 2004.
DOI : 10.1016/j.ijsolstr.2004.06.019

]. P. Delobelle, E. Fribourg-blanc, D. Rèmiens-]-p, G. S. Delobelle, E. Wang et al., Mechanical properties determined by nanoindentation tests of [Pb(Zr,Ti)O3] and [Pb(Mg1/3Nb2/3)1???xTixO3] sputtered thin films, Wspomagana komputerowo statystyczna analiza wyników bada?, pp.1385-1393223, 2001.
DOI : 10.1016/j.tsf.2006.03.062

]. K. Dogheche-2005, L. Duong, D. Buchaillot, P. Collard, X. Schmitt et al., Réalisation de transducteurs piézoélectriques intégrés sur silicium : Applications à l'imagerie acoustique Thermal and electrostatic reliability characterization in RF MEMS switches Properties of AlN thin films for piezoelectric transducers and microwave filter applications, Microelectronics Reliability 45, pp.1790-17933032, 1999.

]. D. Dubois and P. Muralt, Stress and piezoelectric properties of aluminum nitride thin films deposited onto metal electrodes by pulsed direct current reactive sputtering, Oficyna Wydawnicza Politechniki Wroc?awskiej, pp.6389-6395, 2001.
DOI : 10.1063/1.1359162

S. Gahide, Basic Physical Properties Properties of Group III Nitrides The Institution of Electrical Engineers INSPEC Exploration of micromachines to textiles: monitoring warp tension and breaks during the formation of woven fabrics, Chapter, 1994.

]. W. Gambin-2005, A. Gambin, and . Zarzycki, Termo-spr??ysta analiza struktur bimorficznych stosowanych w uk?adach typu MEMS " , paper in " Analiza i modelowanie wybranych procesów mechanicznych " , report on the research project for the year 2005, Faculty of Mechatronics, W. L. Gambin (leader), 2005.

]. R. Gilbertson-1996, J. D. Gilbertson, and . Busch, A survey of micro-actuator technologies for future spacecraft mission, The Journal of The British Interplanatary Society, vol.49, pp.129-138, 1996.

C. Gorecki, M. Józwik, L. Sa?but, C. Gorecki-]-c, A. Gorecki et al., Multifunctional interferometric platform for on-chip testing the micromechanical properties of MEMS/MOEMS Association of MEMS technology with Integrated Optics: demonstration of active membrane in-situ read-out by monolithic integration of silicon-based Mach Zehnder interferometer Integrated Optics and Mems (Guided Wave Moems) Static and dynamic measurements of active MEMS by Twyman-Green interferometry: case of AlN-based microactuators, Gorecki 2005 c] Ch. Gorecki Proceedings of SPIE 6293, pp.1-1065, 2005.

C. Gorecki, M. Józwik, P. Dellobelle-]-c, K. Gorecki, A. Krupa et al., An interferometric platform for static, quasi-static and dynamic evaluation of out-of-plane deformations of MEMS and MOEMS " , Chapter 10 in " Optical Inspection of Microsystems Twyman-Green interferometry in study of AlN material as an actuation layer in MEMS, Proceedings of SPIE 7064, pp.706402-706403, 2007.

]. L. Guy-1999, S. Guy, E. M. Muensit, ]. A. Goldys, D. Hartzell et al., Extensional piezoelectric coefficients of gallium nitride and aluminum nitride, IEEE of 37 th Annual International Reliability Physics Symposium Sensors and Actuators A 112, pp.4133-4135202, 1999.
DOI : 10.1063/1.125560

C. J. Ho, T. K. Shing, and P. C. Li, Preferred orientation control and characterization of AlN thin films using reactive sputtering Micromachine Based Fabric Formation Systems, Tamkang Journal of Science and Engineering, vol.7, issue.1, pp.1-4, 2001.

]. E. Iborra-2004, J. Iborra, M. Olivares, L. Clement, A. Vergara et al., Piezoelectric properties and residual stress of sputtered AlN thin films for MEMS applications Control of preferential orientation of AIN films prepared by the reactive sputtering method Wytrzyma?o?? materia?ów, Sensors and Actuators A 115 Opto-numeryczne metody wyznaczania wielko?ci mechanicznych charakteryzuj?cych mikroelementy stosowane w urz?dzeniach typu MEMS, pp.501-507152, 1984.

M. Józwik, C. Górecki, A. Sabac, P. Delobelle, M. Kujawi?ska-]-m et al., Evaluation of micromechanical properties of buckled SiO x N y loaded membranes by combining the Twyman-Green interferometry with nanoindentation and point-wise deflection technique Optics and Lasers in Engeneering 41 Badanie niezawodno?ci mikroaktuatorów z warstw? AlN wspomagane metodami interferometrycznymi Numerycznoeksperymentalna metodyka badania mikrobelek z piezoelektryczn? warstw? azotku aluminium, Micromechanical Systems (MEMS): Fabrication, Design, and Applications Journal of Smart Materials and Structures 10, pp.703-716475, 2001.

]. W. Jüptner-1993 and . Jüptner, Nondestructive testing with interferometry Wielofunkcyjna platforma interferencyjna do pomiarów aktywnych elementów MEMS, Proceedings of Fringe'93, pp.315-324, 1993.

]. J. Kapkowski, M. Kujawi?ska-]-w, and . Kaszuwara, Wspó?czesne zastosowania technik hybrydowych w mechanice cia?a sta?ego Ceramiczne materia?y piezoelektryczne, XVI Sympozjum Mechaniki Eksperymentalnej Jachranka, issue.2, pp.132-15265, 1994.

]. R. Kazinczi, J. R. Mollinger, and A. Bossche, Versatile tool for characterising long-term stability and reliability of micromechanical structures, Sensors and Actuators A: Physical, vol.85, issue.1-3, pp.84-89, 2000.
DOI : 10.1016/S0924-4247(00)00331-9

]. Jh, S. Kim, J. Lee, J. Ahn, and . Lee, AlN piezoelectric materials for wireless communication thin film components, Journal of Ceramic Processing Research, vol.3, issue.1, pp.25-28, 2002.

]. R. King, ]. Krupa, M. Józwik, A. Andrei, ?. Nieradko et al., Influence study of thermal effects on MEMS cantilever behavior AlN driven microcantilever actuators: modeling, fabrication, characterization Characterization of MEMS cantilevers Static and dynamic characterization of AlN-driven microcantilevers using optical interference microscopy, th International Conference MECHATRONICS 2007, Warsaw, Recent Advances in Mechatronics Proceedings of Technical Digest Of The Fourteenth Microoptics Conference Pryputniewicz, " Computational and experimental hybrid study of deformations in a microelectronic connector Proceedings of SPIE 2545, pp.1657-1664531, 1987.

]. M. Kujawi?ska-2002 and . Kujawi?ska, Modern optical measurement station for micro-materials and micro-elements studies Podstawy analizy obrazu pr??kowego Charter 2 in " Interferometria laserowa z automatyczn? analiz? obrazu Optyczno-numeryczne systemy wspomagania projektowania, analizy i kontroli struktur in?ynierskich, Sensors and Actuators A 99 Oficyna Wydawnicza Politechniki Warszawskiej Charter 9 in " Interferometria laserowa z automatyczn? analiz? obrazu Oficyna Wydawnicza Politechniki Warszawskiej, pp.144-153, 2002.

]. K. Kusaka, D. Taniguchi, T. Hanakusa, K. Tominaga, and H. Laerman, Effect of input power on crystal orientation and residual stress in AlN film deposited by dc sputtering, Vacuum, vol.59, issue.2-3, pp.806-813, 2000.
DOI : 10.1016/S0042-207X(00)00351-1

]. K. Lakin, J. Belsick, J. F. Mcdonald, and K. T. Mccarron, Improved bulk wave rezonator coupling coefficient for wide bandwidth filters, IEEE Ultrasonics Symposium 3E-5, pp.1-5, 2001.

]. T. Laurent, F. O. Bastien, J. C. Pommier, A. Cachard, D. Remiens et al., Lamb wave and plate mode in ZnO/silicon and AlN/silicon membrane. Application to sensors able to operate in contact with liquid, pp.26-37, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00158554

]. C. Lueng, H. L. Chan, C. Surya, and C. L. Choy, Piezoelectric coefficient of aluminum nitride and gallium nitride, Journal of Applied Physics, vol.88, issue.9, pp.5360-5363, 2000.
DOI : 10.1063/1.1317244

]. M. Madou-]-m and . Madou, Fundamentals of microfabrications, The MEMS Handbook, 1997.

]. D. Malacara, ]. F. Martin, P. Muralt, M. Dubois, A. Pezous et al., Basic Interferometers Handbook of optical engineering Thickness dependence of the properties of highly c-axis textured AlN thin films Measurement of intrinsic stresses during growth of aluminium nitride thin films by reactive sputter deposition Failure modes in surface micromachined microelectromechanical actuator systems, Journal of Vacuum Science and Technology A Journal of Applied Physics MEMS Exchange Microelectronics Reliability, vol.22, issue.7448, pp.361-3652411, 1993.

S. Brown, Advanced getter solutions at wafer level to assure high reliability to the last generations MEMS Reliability and Fatigue testing of MEMS, 41 st Annual Proceedings of the IEEE International Symposium on Reliability Physics, pp.458-459, 1997.

]. P. Muralt, J. Antifacos, M. Cantoni, R. Lanz, F. Martin-]-s et al., Is there a better material for thin film BAW applications than AlN ? Reliability modelling and analysis of thermal MEMS Wyra?anie niepewno?ci pomiaru " , guide published by Central Office of Measures Simulation, fabrication and testing of aluminium nitride piezoelectric microbridges, Proceedings of SPIE 5836, pp.315-320235, 1999.

]. W. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1583, 1992.
DOI : 10.1557/JMR.1992.0613

]. T. Palacios, F. Calle, E. Monroy, J. Grajal, M. Eickhoff et al., Optical inspection of microsystems Boca Raton, Materials Science and Engineering B93, pp.154-158, 2002.

]. V. Pantojas, W. Otano-rivera, and J. W. Caraballo, Statistical analysis of the effect of deposition parameters on the preferred orientation of sputtered AlN thin films, Thin Solid Films, vol.492, issue.1-2, pp.118-123, 2005.
DOI : 10.1016/j.tsf.2005.06.087

]. K. Patorski, Z. Sienicki, M. Paw?owski, A. Styk, and A. Jó?wicka, Studies of the properties of the temporal phase-shifting method applied to silicone microelement vibration investigations using the time-average method, Optical Micro- and Nanometrology in Manufacturing Technology, pp.208-219, 2004.
DOI : 10.1117/12.545450

]. K. Petersen, Silicon as a mechanical material, Proceedings of the IEEE, vol.70, issue.5, pp.420-457, 1982.
DOI : 10.1109/PROC.1982.12331

]. S. Petitgrand, R. Yahiaoui, K. Danaie, A. Bosseboeuf, and J. P. Gilles, 3D measurement of micromechanical devices vibration mode shapes with a stroboscopic interferometric microscope, Optics and Lasers in Engineering, vol.36, issue.2, pp.77-101, 2001.
DOI : 10.1016/S0143-8166(01)00040-9

]. S. Petitgrand, R. Yahiaoui, A. Bosseboeuf, K. Y. Danaie-]-c, M. Poon et al., Quantitative timeaveraged microscopic interferometry for micromechanical device vibration mode characterization Strain measurement of composites using an automated moiré interferometry method Unification of FEM modelling with laser experimentation " in " Unification of Finite Elements, Finite Differences, and Calculus of Variations Influence of the average roughness Rms on the precision of the Young's modulus and hardness determination using nanoindentation technique with a Berkovich indenter Analysis of stress and strain distribution in thin films and substrates An AlN piezoelectric microactuator array, Proceedings of SPIE 4400, pp.51-6045, 1976.

]. R. Saha-2002, W. D. Saha, and . Nix, Effects of the substrate on the determination of thin film mechanical properties by nanoindentation, Acta Materialia, vol.50, issue.1, pp.23-28, 2002.
DOI : 10.1016/S1359-6454(01)00328-7

]. L. Sa?but-1996, M. Sa?but, D. Kujawi?ska, W. Holstein, . Jüptner-]-l et al., Comparative analysis of laser weldment properties by grating interferometry and digital speckle photography Active micro-elements testing by interferometry using time-average and quasi-stroboscopic techniques, Proceedings of 11 th international Conference on Experimental Mechanics Proceedings of SPIE 5145 Interferometria laserowa z automatyczn? analiz? obrazu Oficyna Wydawnicza Politechniki Warszawskiej, pp.1331-133623, 1996.

L. Sa?but, K. Patorski, A. Sanz-hervás, M. Clement, E. Iborra et al., Profilometria i mikroprofilometria interferencyjna Interferometria laserowa z automatyczn? analiz? obrazu Degradation of the piezoelectric response of sputtered c-axis AlN thin films with traces of non-(0002) x-ray diffraction peaks, Oficyna Wydawnicza Politechniki Warszawskiej, pp.161915-161916, 2005.

]. V. Samper, A. Trigg-]-v, and . Sarihan, MEMS Failure Analysis and Reliability Role of film intrinsic stress in packaging of multi-layer microelectronic structures, Proceedings of 10 th IPFA, Invited Paper, pp.17-22109, 2003.

]. W. Sharpe-jr, Mechanical properties of MEMS materials " in " MEMS: Introduction and Fundamentals, 2006.

]. M. Small and W. D. Nix, Analysis of accuracy of the bulge test in determining the mechanical properties of thin films The constituent equations of piezoelectric heterogeneous bimorphs, Small Journal of Materials Research IEEE Transaction on Ultrasonics Ferroelectrics, and Frequency Control, vol.7, issue.383, pp.1553-1563256, 1991.

]. V. Srikar and S. D. Senturia, The reliability of microelectromechanical systems (MEMS) in shock environments, Content by FSRM, VDI/VDE-IT, Yole Dèvelopment, NEMO SUMMER SCHOOL Highlights in Microtechnology, Neûchatel, pp.206-214, 2002.
DOI : 10.1109/JMEMS.2002.1007399

]. G. Stoney-]-d, N. F. Tanner, . L. Smith, W. P. Irwin, K. S. Eaton et al., The Tension of Metallic Films Deposited by Electrolysis, MEMS Reliability: Infrastructure, Test Structures, Experiments, and Failure Modes Microactuators and their technologies, pp.172-175431, 1909.
DOI : 10.1098/rspa.1909.0021

]. W. Trimmer and R. H. Stroud, Theory of Mechanical Vibration Scaling of micromechanical devices " in " MEMS: Introduction and Fundamentals, 1960.

]. K. Tsubouchi-1981, K. Tsubouchi, N. Sugai, ]. L. Mikoshida, J. Vergara et al., AlN material constants evaluation and SAW properties on AlN/Al 2 O 3 and AlN/Si Effect of rapid thermal annealing on the crystal quality and the piezoelectric response of polycrystalline AlN films, IEEE Ultrasonics Symposium Thin Solid Films, vol.515, pp.375-3801814, 1981.

]. V. Walter, Caractérisation et modélisation électroméchanique de dépots de couches épaisses sérigraphiées sur substrate d'alumine. Application au contrôle de forme et à l'amortissement actif d'un bimorphe, 2001.

]. V. Walter, P. Delobelle, P. L. Moal, E. Joseph, and M. Collet, A piezo-mechanical characterisation of PZT thick films screen-printed on Alumina substrate, Sensors and Actuators A 96, pp.157-166, 2002.

]. Q. Wang, L. E. Cross, ]. L. Wang, J. M. Dawson, J. Cheng et al., Constitutive equations of symmetrical triple layer piezoelectric benders, Proceedings of the IEEE International Symposium on Industrial Electronics 2, pp.1343-1351535, 1999.
DOI : 10.1109/58.808857

]. I. De-wolf, M. Van-spengen, R. Mertens, R. J. Puers-]-j, R. A. Wortman et al., A low frequency electrical test set-up for the reliability assessment of capacitive RF switches Young's modulus, shear modulus and Poisson's ration in silicon and germanium, Journal of Micromechanics and Microengineering Journal of Applied Physics, vol.13, issue.361, pp.604-612153, 1965.

]. A. Wright, Elastic properties of zinc-blende and wurtzite AlN, GaN, and InN, Journal of Applied Physics, vol.82, issue.6, pp.2833-2839, 1997.
DOI : 10.1063/1.366114

J. Wu-]-w, X. Xiao, and J. , Inductive links with integrated receiving coils for MEMS and implantable applications Optical and mechanical properties of nanocrstalline aluminium oxy-nitride films prepared by electron cyclotron resonance plasma enhanced chemical vapor deposition, Journal of Crystal Growth, vol.264, pp.165-171, 2003.

]. X. Xu, H. S. Wu, C. J. Zhang, and Z. H. Jin, Morphological properties of AlN piezoelectric thin films deposited by DC reactive magnetron sputtering, Thin Solid Films, vol.388, issue.1-2, pp.62-67, 2001.
DOI : 10.1016/S0040-6090(00)01914-3

K. C. Huang, M. Hwang, . C. Li-]-o, ]. C. Zienkiewicz, D. Zink et al., The influence of indenter tip radius on the micro-indentation hardness Magnetic MEMS and its applications The Finite Element Method Development and characterization of membranes actuated by PZT thin film for MEMS applications, Journal of Engineering Materials and Technology, vol.124, pp.371-379483, 1977.