Y. A. Bagaryatskii, Probable mechanism of martensite decomposition, Dokl. Acad. Nauk. SSR, vol.73, pp.1161-1164, 1950.

]. E. Bai68, H. W. Bain, and . Paxton, Les éléments d'addition dans l'acier, 1968.

J. P. Baïlon and J. M. Dorlot, Des matériaux, troisième édition, p.487, 2000.

R. G. Baker and J. Nutting, The tempering of a Cr-Mo-V-W and a Mo-V steel, Precipitation Processes in steels, Iron and steel institute, ISI special report), vol.64, pp.1-22, 1959.

C. J. Barton, The tempering of low carbon internally twinned martensite, Acta Met, p.1085, 1969.

J. Barralis and G. Marder, Précis de Métallurgie, Elaboration structures propriétés, normalisation, 1992.

S. Bechet and L. Beaujard, Nouveau r??actif pour la mise en ??vidence micrographique du grain aust??nitique des aciers tremp??s ou tremp??s-revenus, Revue de M??tallurgie, vol.52, issue.10, p.830, 1955.
DOI : 10.1051/metal/195552100830

R. Bensimon and L. Aciers, Tome 1, Généralité sur les propriétés d'élaboration des aciers et leurs incidences sur les propriétés d'emploi pratique, Théorie et applications des traitements thermiques des aciers, 1971.

J. M. Beswick, Effect of Prior Cold Work on the Martensite Transformation in SAE 52100, Metallurgical Transactions A, vol.245, issue.8, pp.299-306, 1984.
DOI : 10.1007/BF02645115

C. Boulanger, Contribution ?? l?????tude de la purification du fer et ?? la d??termination de ses points de transformation, Revue de M??tallurgie, vol.53, issue.4, pp.311-319, 1956.
DOI : 10.1051/metal/195653040311

Z. S. Bozinski, W. Hume-rottery, and A. L. Sutton, The lattice expension of Iron, Proc. Roy. Soc, A229, pp.459-467, 1955.

D. E. Bradley, Replica and shadowing techniques, Techniques for Electron Microscopy, 1965.

R. F. Bunshah and R. F. , Rate of propagation of martensite, Trans. AIME, p.197, 1953.

F. G. Caballero, C. Capdevila, C. Garcia-de, and A. , An Attempt to Establish the Variables That Most Directly Influence the Austenite Formation Process in Steels, ISIJ International, vol.43, issue.5, pp.726-735, 2003.
DOI : 10.2355/isijinternational.43.726

J. W. Cahn and W. C. Hugel, Theory of the pearlite reaction dans Décomposition of austenite by diffusionnal process, proceeding, 1962.

C. Cayron, : a computer program to automatically reconstruct the parent grains from electron backscatter diffraction data, Journal of Applied Crystallography, vol.40, issue.6, pp.1183-1188, 2007.
DOI : 10.1107/S0021889807048777

J. Chipman, Thermodynamics and phase diagram of the Fe-C system, Metallurgical Transactions, vol.12, issue.no. 13, pp.55-64, 1972.
DOI : 10.1007/BF02680585

M. Cohen, Retained austenite, Transaction of the ASM, pp.35-94, 1949.

A. Constant, M. Grumbash, and G. Sanz, Étude des transformations de l'austénite et de l'évolution des précipités dans les aciers à dispersoïdes, conséquences pratiques, p.918, 1970.

G. Delbart and M. Ravery, Les recherches sur la trempe isotherme en France et à l'étranger, Revue de Metallurgie, pp.475-502, 1949.

G. Delbart and F. Maratray, ??tude de quelques aciers ?? faible teneur en ??l??ments d???alliage, trait??s par trempe classique et par trempe ??tag??e, Revue de M??tallurgie, vol.50, issue.11, pp.781-806, 1953.
DOI : 10.1051/metal/195350110781

D. P. Dunne and C. M. Wayman, The crystallography of ferrous martensites, Metallurgical Transactions, vol.19, issue.9, p.2327, 1971.
DOI : 10.1007/BF02814872

G. Eldis, Austforming and tempering of high alloy steels, 1971.

]. T. Epi08, D. Epicier, M. Acevedo, and . Perez, Crystallographic structure of vanadium carbide precipitates in a model Fe-C-V steel, Philosophical Magazine, vol.88, pp.31-45, 2008.

E. J. Fasiska and H. Wagenblas, Dilatation of alpha-iron by carbon, Trans. AIME, vol.239, p.1818, 1967.

E. Girault, A. Mertens, P. Jacques, Y. Houbaert, B. Verlinde et al., Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase TRIP-assisted steels, Scripta Materialia, vol.44, issue.6, pp.885-892, 2001.
DOI : 10.1016/S1359-6462(00)00697-7

A. K. Giumelli, M. Militzer, and E. Hawbolt, Analyse of the austenite grain size distribution in plain carbon steels, Iron and Steel Institute, pp.271-280, 1999.

T. Gladman and D. Dulieu, Grain-Size Control in Steels, Metal Science, vol.2, issue.1, pp.167-176, 1974.
DOI : 10.1007/BF00555381

T. Gladman, Physical metallurgy of microalloyed medium carbon engineering steels, Iron making and steelmaking, pp.241-245, 1989.

R. A. Grange and R. W. Baughman, Hardness of tempered martensite in carbon and low alloy steels, Transaction of the ASM, pp.165-197, 1956.

R. A. Grange, C. R. Hribal, and L. F. Porter, Hardness of tempered martensite in carbon and low-alloy steels, Metallurgical Transactions A, vol.162, issue.11, pp.1775-1785, 1977.
DOI : 10.1007/BF02646882

]. L. Gui28 and . Guillet, Trempe, recuit, revenu : traité théorique et pratique, Edition Dunod, 1928.

M. Guttman, P. Dumoulin, and M. Wayman, The thermodynamics of interactive cosegregation of phosphorus and alloying elements in iron and temper-brittle steels, Metall. Trans, vol.13, p.1963, 1982.

D. W. Hitzner and W. V. Geertruyden, Crystallography and metallography of carbides in high alloy steels, Materials Characterization, vol.59, issue.7, pp.825-341, 2008.
DOI : 10.1016/j.matchar.2007.07.005

Y. Hirotsu and S. Nagakura, Crystal structure and morphology of the carbide precipitated from martensitic high carbon steel during the first stage of tempering, Acta Metallurgica, vol.20, issue.4, pp.645-653, 1972.
DOI : 10.1016/0001-6160(72)90020-X

R. M. Hobbs, G. W. Lorimer, and N. Ridley, Effect of silicon on the microstructure of quenched and tempered medium carbon steels, Journal of Iron and Steel institute, vol.210, pp.757-764, 1972.

D. W. Hoffman, Ausforming strengthening of iron-nickel-carbon martensite, 1966.

J. H. Holomon and L. D. Jaffe, Time Temperature relationships in tempering steel, Trans. AIME, vol.162, p.2023, 1945.

R. W. Honeycome, Structure and strength of alloy steels, publication de la Climax Molybdenum Company (1974) d'après

]. H. Hou71, H. J. Hougardy, A. Pietrzoniuk, and . Rose, Aciers de construction soudables à dispesoïdes, rapport EUR7492, pp.49-68, 1971.

K. H. Jack, Structural transformation in the tempering of high carbon martensitic steels, Journal of the Iron and Steel Institute, vol.169, p.26, 1951.

D. H. Jack, The orientation relationships of interstitial phases in iron, Materials Science and Engineering, vol.13, issue.1, p.19, 1974.
DOI : 10.1016/0025-5416(74)90017-2

L. Jaffe and E. Gordon, Iron age, pp.227-234, 1957.

]. D. Kal70, M. Kalish, and . Cohen, Structural changes and strengthening in the strain tempering of martensite, Material Science and Engineering, vol.6, p.156, 1970.

W. J. Kaluba, R. Taillard, and J. Foet, The bainitic mechanism of austenite formation during rapid heating, Acta Materialia, vol.46, issue.16, pp.5917-5927, 1998.
DOI : 10.1016/S1359-6454(98)00210-9

L. Kaufman and M. Cohen, Thermodynamics and kinetics of martensitic transformations, Progress in Metal Physics, p.165, 1958.
DOI : 10.1016/0502-8205(58)90005-4

D. T. Keating and A. N. Coland, Atomic displacements in martensite, Acta Met, p.1805, 1967.

P. M. Kelly and J. Nutting, The morphology of martensite, Journal of Iron and Steel Institute, p.199, 1961.

D. P. Koistinen and R. E. Marburger, A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels, Acta Metallurgica, vol.7, issue.1, pp.59-60, 1959.
DOI : 10.1016/0001-6160(59)90170-1

K. Kozeschnik and H. K. Bhadeshia, Influence of silicon on cementite precipitation in steels, Materials Science and Technology, vol.8, issue.3, pp.443-447, 2008.
DOI : 10.1007/s11661-007-9160-3

G. Krauss and A. R. Marder, The morphology of martensite in Iron carbon alloys Met, Trans, vol.2, p.2343, 1971.

C. Y. Kung and J. J. Rayment, An examination of the validity of existing empirical formulae for the calculation of ms temperature, Metallurgical Transactions A, vol.2, issue.2, pp.328-331, 1982.
DOI : 10.1007/BF02643327

K. Kuo, Alloy carbides precipitated during the fourth stage of tempering, J. iron and steel institute, pp.258-268, 1956.

G. V. Kurdjumov and G. Sachs, ???ber den Mechanismus der Stahlh???rtung, Zeitschrift f???r Physik, vol.64, issue.5-6, p.325, 1930.
DOI : 10.1007/BF01397346

]. P. Lac90, G. Lacombe, and . Béranger, Structures et diagrammes d'équilibre des diverses nuances d'aciers inoxydable : conséquences sur leur traitements thermiques, Les aciers inoxydables, Les éditions de physiques, pp.18-58, 1990.

I. Lakhtine, Métallographie et traitements thermiques des métaux, 1978.

S. J. Lee and Y. K. Lee, Prediction of austenite grain growth during austenitization of low alloy steels, Materials & Design, vol.29, issue.9, pp.1840-1844, 2008.
DOI : 10.1016/j.matdes.2008.03.009

P. Leduc, rapport de DEA de l'institut National Polytechnique de Grenoble intitulé Dissolution de la cémentite au tréfilage de la perlite, 1998.

T. C. Lei, J. Sun, C. H. Tang, and M. Lei, Precipitation???segregation mechanism for high temperature temper embrittlement of steels revealed by Auger electron spectroscopy and internal friction measurements, Materials Science and Technology, vol.16, issue.2, pp.124-133, 1990.
DOI : 10.1007/BF02660632

B. S. Lement and M. Cohen, A dislocation-attraction model for the first stage of tempering, Acta Metallurgica, vol.4, issue.5, p.469, 1956.
DOI : 10.1016/0001-6160(56)90043-8

W. C. Leslie and G. C. Rauch, Precipitation of carbides in low-carbon Fe-AI-C alloys, Metallurgical Transactions A, vol.46, issue.3, pp.343-349, 1978.
DOI : 10.1007/BF02646383

R. Lévèque, Aciers à outils : données numériques normalisées, Technique de l'ingénieur, M4590, Traités Matériaux Métalliques, 2004.

S. Maropoulos, N. Ridley, and S. Karagiannis, Structural variations in heat treated low alloy steel forgings, Materials Science and Engineering: A, vol.380, issue.1-2, pp.79-92, 2004.
DOI : 10.1016/j.msea.2004.03.053

A. R. Marder and G. Krauss, The morphology of martensite in Iron-Carbon alloys, Transaction of the ASM, pp.651-660, 1967.

R. F. Mehl and C. Wells, Constitution of High purity iron carbon alloys, Technical publication n°798, AIME, Iron and steel Division, p.125, 1937.

G. Miyamoto, J. C. Oh, K. Hono, T. Furuhara, and T. Maki, Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe???0.6 mass% C martensite, Acta Materialia, vol.55, issue.15, pp.5027-5038, 2007.
DOI : 10.1016/j.actamat.2007.05.023

S. C. Moss, Static atomic displacements in iron-carbon martensite, Acta Metallurgica, vol.15, issue.12, p.1815, 1967.
DOI : 10.1016/0001-6160(67)90046-6

G. Murry, Transformation dans les aciers, Techniques de l'ingénieur, M1115, Traités Matériaux Métalliques Trans. AIME, vol.167, p.494, 1946.

J. Orlich, A. Rose, and P. Wiest, Atlas zur Warmebehandlung des stahle, Zeit temperatur austenitisierung schaubilder MPI

]. R. Pad84, W. E. Padmanabhan, and . Wood, Precipitation of ?-carbides in Martensite, Materials Science and Engineering, vol.65, pp.289-297, 1984.

M. Palumbo, Thermodynamics of martensitic transformations in the framework of the CALPHAD approach, Computer coupling of phase diagrams and thermochemistry, pp.693-708, 2008.

R. L. Patterson and C. M. Wayman, Internal twinning in ferrous martensites, Acta Metallurgica, vol.12, issue.11, p.1306, 1964.
DOI : 10.1016/0001-6160(64)90119-1

P. Payson, Tempered alloy martensites, Transaction of the ASM, pp.60-93, 1959.

F. Peilloud and M. Guillot, Contribution à l'étude de la stabilité dimensionnelles des aciers à roulement, Mécanique Matériaux Électricité, vol.316, pp.28-35, 1976.

W. Pitsh, Journée d'information CECA, métallurgie physique, Propriétés d'emploi et d'utilisation de l'acier, pp.27-44, 1975.

]. A. Por31, P. Portevin, and . Chevenard, Contribution à l'étude du revenue des aciers trempés, pp.1-2, 1931.

D. A. Porter and K. E. Easterling, Phase transformations in Metals and Alloys, second edition, 1992.

T. Reti, Z. Fried, and I. Felde, Computer simulation of steel quenching process using a multi-phase transformation model, Computational Materials Science, vol.22, issue.3-4, pp.261-278, 2001.
DOI : 10.1016/S0927-0256(01)00240-3

]. C. Rob53 and . Roberts, Effect of carbon on the volume fraction and lattice parameters of retained austenite and martensite, Journal of Metals, vol.5, p.208, 1953.

C. S. Roberts, B. L. Averbach, and M. Cohen, The mechanism and kinetics of the first stage of tempering, Transaction of the ASM, vol.45, p.576, 1953.

]. D. Sht99 and K. Shtansky, Nakai et I. Ohmori, Pearlite to austenite transformation in an Fe-2.6Cr-1C alloy, Acta Mater, vol.47, issue.9, pp.2619-2632, 1999.

C. Sidoroff, thèse de doctorat de l'institut national des sciences appliquées de Lyon Analyse microstructurale et modélisation des évolutions dimensionnelles de l'acier 100Cr6, 2002.

G. R. Speich, Tempering of low carbon martensite, Trans. AIME, vol.245, pp.2253-2564, 1969.

G. R. Speich and W. C. Leslie, Tempering of steel, Metallurgical Transactions, vol.60, issue.5, pp.1043-1054, 1972.
DOI : 10.1007/BF02642436

W. Stevens and A. G. Haynes, The temperature of formation of martensite and bainite in low alloy steels, some effects of chemical composition, Journal of Iron and steel Institute, pp.349-359, 1956.

M. G. Wells, An electron Transmission Study of the tempering of martensite in Fe-Ni-Alloy, Acta Met, p.389, 1964.

J. H. Woodhead, Vanadium in high strength steel, Vanite, Proc. Sem., Chicago, 1979.

Y. Yazawa, T. Furuhara, and T. Maki, Effect of matrix recrystallization on morphology, crystallography and coarsening behavior of vanadium carbide in austenite, Acta Materialia, vol.52, issue.12, pp.3727-3736, 2004.
DOI : 10.1016/j.actamat.2004.04.027

A. Yoshie, M. Fujioka, Y. Watanabe, H. Nishioka, and H. Morikawa, Modelling of microstructural evolution and mechanical properties of steel plates, ISIJ International, vol.32, pp.414-422, 1992.

J. Zvolkej, G. Murry, and A. Constant, Étude de l'influence des éléments d'addition sur les propriétés de l'acier à 9% Ni, pp.25-35, 1969.