W. Arthur, A. P. Adamson, and . Gast, Physical Chemistry of Surfaces, 1997.

J. Agnus, N. Chaillet, P. Lambert, and S. Régnier, La microrobotique: applications à la micromanipulation, Hermès Science, 2008.

S. Alvo, P. Lambert, M. Gauthier, and S. Régnier, A van der waals force based adhesion model for micromanipulation, J. Adhes. Sci. Technol, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00545519

A. L. Barabási, R. Albert, and P. Schiffer, The physics of sand castles: maximum angle of stability in wet and dry granular media, Physica A: Statistical Mechanics and its Applications, vol.266, issue.1-4, pp.1-4366, 1999.
DOI : 10.1016/S0378-4371(98)00618-9

C. Bark and T. Binnenboese, Gripping with low viscosity fluids, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176), pp.301-305, 1998.
DOI : 10.1109/MEMSYS.1998.659772

K. Bark, Adhäsives Greifen von kleinen Teilen mittels niedrigviskoser Flüssigkeiten, 1999.

N. Bastin, A. Chau, A. Delchambre, and P. Lambert, Effects of relative humidity on capillary force and applicability of these effects in micromanipulation, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2008.
DOI : 10.1109/IROS.2008.4651252

B. Bhushan, Modern Tribology Handbook, Two Volume Set, 2000.
DOI : 10.1201/9780849377877

F. Biganzoli, I. Fassi, and C. Pagano, Development of a gripping system based on capillary force, (ISATP 2005). The 6th IEEE International Symposium on Assembly and Task Planning: From Nano to Macro Assembly and Manufacturing, 2005., pp.36-40, 2005.
DOI : 10.1109/ISATP.2005.1511447

F. Karl, M. Bohringer, S. Girot, and . Régnier, Heterogeneous system integration by self-assembly. Hybrid and Self-Assembly Workshop Characterization of cellular mechanical behavior at the microscale level by a hybrid force sensing device, Journal of the mechanical behavior of biomedical materials, vol.2, pp.297-304, 2009.

F. Bourgeois, Vers la maîtrise de la qualité des assemblages de précision, 2007.

E. P. George, J. S. Box, W. G. Hunter, and . Hunter, Statictics for experimenters (Design, innovation and discovery), 2005.

J. P. Boyd, Chebyshev and Fourier Spectral Methods, East 2nd Street Mineola, p.31, 2001.
DOI : 10.1007/978-3-642-83876-7

M. Bracke, F. D. Voeght, and P. Joos, The kinetics of wetting: the dynamic contact angle
DOI : 10.1007/BFb0116200

K. Brakke, The Surface Evolver, Experimental Mathematics, vol.11, issue.2, pp.141-65, 1992.
DOI : 10.2307/1970949

J. M. Breguet, S. Henein, R. Mericio, and R. Clavel, Monolithic piezoceramic flexible strutures for micromanipulation, Proc. 9th Int. Precision Engeneering Seminar, 4th Int. Conf on Ultraprecision in Manufacturing Engeneering, pp.397-400, 1997.

J. M. Breguet, Actionneurs Stick-Slip pour micro-manipulateurs, 1998.

N. Bremond, A. R. Thiam, and J. Bibette, Decompressing Emulsion Droplets Favors Coalescence, Physical Review Letters, vol.100, issue.2, p.24501, 2008.
DOI : 10.1103/PhysRevLett.100.024501
URL : https://hal.archives-ouvertes.fr/hal-00264516

H. Bruus, Theoretical Microfluidics, 2008.

B. Capella and G. Dietler, Force-distance curves by atomic force microscopy, Surface Science Reports, vol.34, issue.1-3, pp.1-104, 1999.
DOI : 10.1016/S0167-5729(99)00003-5

A. Chau, Theoretical and experimental study of capillary condensation and of its possible use in micro-assembly -Etude théorique et expérimentale des forces dues à la condensation capillaire, 2007.

A. Chau, A. Delchambre, S. Régnier, and P. Lambert, Towards a general three dimensional model for capillary nanobridges and capillary forces, Proc. of the 5th International Workshop on Microfactories (IWMF), 2006.

A. Chau, P. Lambert, P. Bouillard, and A. Delchambre, Behaviour of Flexure Hinges for Use as Articulations in High Precision Mechanisms, MicroNano Integration, pp.287-288, 2003.
DOI : 10.1007/978-3-642-18727-8_42

A. Chau, P. Lambert, and A. Delchambre, A general 3d model to compute capillary force, Proc. Of MicroMechanics Europe 2005, pp.156-165, 2005.

A. Chau, P. Lambert, and A. Delchambre, Modélisation de la condensation capillaire pour le micro-assemblage, Actes de la première journée sur la modélisation et l'anayse dimensionnelle, 2005.

A. Chau, S. Régnier, A. Delchambre, and P. Lambert, Influence of geometrical parameters on capillary forces, 2007 IEEE International Symposium on Assembly and Manufacturing, pp.215-220, 2007.
DOI : 10.1109/ISAM.2007.4288475

A. Chau, S. Régnier, A. Delchambre, and P. Lambert, Three-dimensional model for capillary nanobridges and capillary forces, Modelling and Simulation in Materials Science and Engineering, vol.15, issue.3, pp.305-317, 2007.
DOI : 10.1088/0965-0393/15/3/009

A. Chau, S. Régnier, A. Delchambre, and P. Lambert, Theoretical and experimental study of the influence of afm tip geometry and orientation on capillary force, J. Adhes. Sci. Technol, 2009.

H. Chen, Y. Zhao, Y. Song, and L. Jiang, One-Step Multicomponent Encapsulation by Compound-Fluidic Electrospray, Journal of the American Chemical Society, vol.130, issue.25, pp.7800-7801, 2008.
DOI : 10.1021/ja801803x

H. Chen, Y. Zhao, and L. Jiang, Compound-fluidic electrospray: An efficient method for the fabrication of microcapsules with multicompartment structure, Chinese Science Bulletin, vol.34, issue.18, pp.3147-3153, 2009.
DOI : 10.1007/s11434-009-0222-3

X. Chen and R. E. Apfel, Radiation force on a spherical object in an axisymmetric wave field and its application to the calibration of high???frequency transducers, The Journal of the Acoustical Society of America, vol.99, issue.2, pp.713-724, 1996.
DOI : 10.1121/1.414648

D. Cheneler, C. L. Michael, M. J. Ward, Z. Adams, and . Zhang, Measurement of dynamic properties of small volumes of fluid using MEMS, Sensors and Actuators B: Chemical, vol.130, issue.2, pp.701-706, 2008.
DOI : 10.1016/j.snb.2007.10.031

S. K. Cho and C. Kim, Particle separation and concentration control for digital microfluidics systems, 2003.

C. Choi, K. A. Johan, K. S. Westin, and . Breuer, Apparent slip flows in hydrophilic and hydrophobic microchannels, Physics of Fluids, vol.15, issue.10, pp.2897-2902, 2003.
DOI : 10.1063/1.1605425

H. Chuang, A. Kumar, and S. T. Wereley, Open optoelectrowetting droplet actuation, Applied Physics Letters, vol.93, issue.6, p.64104, 2006.
DOI : 10.1063/1.2970047
URL : http://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=1126&context=nanopub

S. E. Chung, W. Park, S. Shin, S. A. Lee, and S. Kwon, Guided and fluidic self-assembly of microstructures using railed microfluidic??channels, Nature Materials, vol.5, issue.7, p.581, 2008.
DOI : 10.1038/nmat2208

M. Cloupeau, Recipes for use of EHD spraying in cone-jet mode and notes on corona discharge effects, Journal of Aerosol Science, vol.25, issue.6, pp.1143-1157, 1993.
DOI : 10.1016/0021-8502(94)90206-2

M. Cloupeau and B. Prunet-foch, Electrostatic spraying of liquids in cone-jet mode, Journal of Electrostatics, vol.22, issue.2, pp.135-159, 1989.
DOI : 10.1016/0304-3886(89)90081-8

C. Cottin-bizonne, J. Barrat, L. Bocquet, and E. Charlaix, Low-friction flows of liquid at nanopatterned interfaces, Nature Materials, vol.2, issue.4, pp.237-240, 2003.
DOI : 10.1038/nmat857

R. G. Cox, Inertial and viscous effects on dynamic contact angles, Journal of Fluid Mechanics, vol.357, pp.249-278, 1998.
DOI : 10.1017/S0022112097008112

J. Fernandez-de-la and M. , On the Outcome of the Coulombic Fission of a Charged Isolated Drop, Journal of Colloid and Interface Science, vol.178, issue.1, pp.209-218, 1996.
DOI : 10.1006/jcis.1996.0109

J. Fernandez-de-la and M. , The Fluid Dynamics of Taylor Cones, Annual Review of Fluid Mechanics, vol.39, issue.1, pp.217-243, 2007.
DOI : 10.1146/annurev.fluid.39.050905.110159

. Pierre-simon-de-laplace, Sur l'action capillaire, Mécanique Céleste - Supplément au Livre X, pp.349-498

A. De-lazzer, M. Dreyer, and H. J. Rath, Particle???Surface Capillary Forces, Langmuir, vol.15, issue.13, pp.4551-4560, 1999.
DOI : 10.1021/la981095+

W. Deng, J. K. Klemic, X. Li, M. A. Reed, and A. Gomez, Increase of electrospray throughput using multiplexed microfabricated sources for the scalable generation of monodisperse droplets, Journal of Aerosol Science, vol.37, issue.6, pp.696-714, 2005.
DOI : 10.1016/j.jaerosci.2005.05.011

W. Deng, J. F. Klemic, X. Li, M. A. Reed, and A. Gomez, Liquid fuel microcombustor using microfabricated multiplexed electrospray sources, Proceedings of the Combustion Institute, pp.2239-2246, 2007.
DOI : 10.1016/j.proci.2006.08.080

W. Driesen, T. Varibel, S. Régnier, and J. Breguet, Micro manipulation by adhesion with tow collaborating mobile micro robots. Microfactory, 4th International Workshop on Microfactories, 2004.

M. Duby, W. Deng, K. Kim, T. Gomez, and A. Gomez, Stabilization of monodisperse electrosprays in the multi-jet mode via electric field enhancement, Journal of Aerosol Science, vol.37, issue.3, pp.306-322, 2006.
DOI : 10.1016/j.jaerosci.2005.05.013

H. E. Edgerton, E. A. Hauser, and W. B. Tucker, Studies in Drop Formation as Revealed by the High-speed Motion Camera, The Journal of Physical Chemistry, vol.41, issue.7, pp.1017-1028, 1937.
DOI : 10.1021/j150385a012

T. F. Embleton, Mean Force on a Sphere in a Spherical Sound Field. II. (Experimental), The Journal of the Acoustical Society of America, vol.26, issue.1, pp.46-50, 1954.
DOI : 10.1121/1.1907287

J. Engmann, C. Servais, and A. S. Burbidge, Squeeze flow theory and applications to rheometry: A review, Journal of Non-Newtonian Fluid Mechanics, vol.132, issue.1-3, pp.1-27, 2005.
DOI : 10.1016/j.jnnfm.2005.08.007

J. Charmet, Liquid as template for next generation micro devices, Journal of Physics: Conference Series, vol.182, p.12021, 2009.
DOI : 10.1088/1742-6596/182/1/012021

D. Chugh-et-karan and V. I. Kaler, Integrated liquid and droplet dielectrophoresis for biochemical assays, Microfluid Nanofluid, 2010.

C. W. Extrand, Model for Contact Angles and Hysteresis on Rough and Ultraphobic Surfaces, Langmuir, vol.18, issue.21, pp.7991-7999, 2002.
DOI : 10.1021/la025769z

R. S. Fearing, Survey of sticking effects for micro parts handling, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots, pp.212-217
DOI : 10.1109/IROS.1995.526162

M. Luis, C. Fidalgo, W. T. Abell, and . Huck, Surface-induced droplet fusion in microfluidic devices, LAB CHIP, vol.7, pp.984-986, 2007.

L. R. Fisher and J. N. Israelachvili, Direct measurement of the effect of meniscus forces on adhesion: A study of the applicability of macroscopic thermodynamics to microscopic liquid interfaces, Colloids and Surfaces, vol.3, issue.4, pp.303-322, 1981.
DOI : 10.1016/0166-6622(81)80058-3

M. Frennet, P. Lambert, and A. Delchambre, Catching and releasing of small parts using capillary forces, Proceedings of the Mechatronics and Robotics 2004 Conference, 2004.

T. Funakawa, New electron injection technique for generating electro spray, Science Link Japan, vol.13, pp.185-190, 2004.

T. Gilet, D. Terwagne, and N. Vandewalle, Digital microfluidics on a wire, Applied Physics Letters, vol.95, issue.1, pp.14106-471419, 2002.
DOI : 10.1063/1.3157141.1

A. De-greef, P. Lambert, and A. Delchambre, A minimally invasive surgery actuator based on a flexible and inflatable structure, Proceedings of the First Annual symposium of the IEEE/EMBS Benelux Chapter, pp.7-8

A. De-greef, P. Lambert, and A. Delchambre, Flexible fluidic actuators: Determining force and position without force or position sensors, 2009 IEEE International Symposium on Assembly and Manufacturing, p.6, 2009.
DOI : 10.1109/ISAM.2009.5376959

A. De-greef, P. Lambert, and A. Delchambre, Towards flexible medical instruments: Review of flexible fluidic actuators, Precision Engineering, vol.33, issue.4, pp.311-321, 2009.
DOI : 10.1016/j.precisioneng.2008.10.004

H. Grutzeck and L. Kiesewetter, Downscaling of grippers for micro assembly, Microsystem Technologies, vol.8, issue.1, pp.27-31, 2002.
DOI : 10.1007/s00542-001-0108-z

D. and S. Haliyo, Les forces d'adhésion et les effets dynamiques pour la micro-manipulation, 2002.

T. Hasegawa, Acoustic radiation force on a sphere in a quasistationary wave field???experiment, The Journal of the Acoustical Society of America, vol.65, issue.1, pp.41-44, 1979.
DOI : 10.1121/1.382264

S. Henein, Conception des guidages flexibles, Presses Polytechniques et universitaires romandes, 2001.

J. Höppner, Verfahren zur berührungslosen Handhabung mittels leistungsstarker Schallwandler, 2002.

. Lung-hsin, K. M. Hung, W. Choi, Y. Tseng, K. J. Tan et al., Alternating droplet generation and controlled dynamic droplet fusion in in microfluidic device for cds nanoparticle synthesis, LAB CHIP, vol.6, pp.174-178, 2006.

J. N. Israelachvili, Intermolecular and Surface Forces, 1992.

J. N. Israelachvili, M. Min, A. Akbulut, G. Alig, W. Carver et al., Recent advances in the surface forces apparatus (SFA) technique, Reports on Progress in Physics, vol.73, issue.3, p.36601, 2010.
DOI : 10.1088/0034-4885/73/3/036601

J. Jang, M. A. Ratner, and G. C. Schatz, Atomic-Scale Roughness Effect on Capillary Force in Atomic Force Microscopy, The Journal of Physical Chemistry B, vol.110, issue.2, pp.659-62, 2005.
DOI : 10.1021/jp056554b

O. H. Tsung-shann-jiang, J. C. Soo-gun, and . Slattery, Correlation for dynamic contact angle, Journal of Colloid and Interface Science, vol.69, issue.1, pp.74-77, 1979.
DOI : 10.1016/0021-9797(79)90081-X

K. L. Johnson, Contact Mechanics, 1985.

T. Jones, Microfluidic schemes using electrical and capillary forces, Journal of Physics: Conference Series, vol.142, p.12054, 2008.
DOI : 10.1088/1742-6596/142/1/012054

J. Jurin, An Account of Some Experiments Shown before the Royal Society; With an Enquiry into the Cause of the Ascent and Suspension of Water in Capillary Tubes. By James Jurin, M. D. and R. Soc. S., Philosophical Transactions of the Royal Society of London, vol.30, issue.351-363, pp.739-747, 1718.
DOI : 10.1098/rstl.1717.0026

S. Kalliadasis and H. Chang, Apparent dynamic contact angle of an advancing gas???liquid meniscus, Physics of Fluids, vol.6, issue.1, pp.12-23, 1994.
DOI : 10.1063/1.868076

M. Kaneda, M. Yamamoto, K. Nakaso, T. Yamamoto, and J. Fukai, Oscillation of a tilted circular pad on a droplet for the self-alignment process, Precision Engineering, vol.31, issue.2, pp.177-184, 2007.
DOI : 10.1016/j.precisioneng.2006.03.005

J. M. Kim, Y. E. Shin, and K. Fujimoto, Dynamic modeling for resin selfalignment mechanism. Microelectronics reliability, pp.983-992, 2004.
DOI : 10.1016/j.microrel.2004.01.006

K. Kim and J. Lee, High aspect ratio tapered hollow metallic microneedle arrays with microfluidic interconnector, Microsystem Technologies, vol.99, issue.3-4, pp.231-235, 2007.
DOI : 10.1007/s00542-006-0221-0

M. Mika, H. K. Kohonen, and . Christenson, Capillary condensation of water between rinsed mica surfaces, Langmuir, vol.16, pp.7285-7293, 2000.

T. Kondo, S. Juodkazis, and H. Misawa, Reduction of capillary force for high-aspect ratio nanofabrication, Applied Physics A, vol.32, issue.454, pp.811583-1586, 2005.
DOI : 10.1007/s00339-005-3337-7

S. Konishi, F. Kawai, and P. Cusin, Thin flexible end-effector using pneumatic balloon actuator, Sensors and Actuators A: Physical, vol.89, issue.1-2, pp.28-35, 2001.
DOI : 10.1016/S0924-4247(00)00533-1

D. C. Kyritsis, Optimization of a catalytic combustor using electrosprayed liquid hydrocarbons for mesoscale power generation, Combustion and Flame, vol.139, issue.1-2, pp.77-89, 2004.
DOI : 10.1016/j.combustflame.2004.06.010

P. Lambert and . Dea, Simulation dynamique d'une tâche de micromanipulation utilisant les forces de surface, 2003.

P. Lambert, A Contribution to Microassembly: a Study of Capillary Forces as a gripping Principle, 2004.

P. Lambert, Capillary Forces in Microassembly: Modeling, Simulation, Experiments, and Case Study. Microtechnology and MEMS, 2007.
DOI : 10.1007/978-0-387-71089-1

P. Lambert, Fluidic assembly and capillary forces: modeling, experiments and case studies, Proc. of the Smart Systems Integration Conference, 2009.

P. Lambert, N. Chaillet, and S. Régnier, Microassembly: application to liquid environment, Workshop on microrobotics held during the Robotics: Science and Systems (2 pages), pp.16-19, 2006.

P. Lambert, L. Charvier, L. Raggi, and J. Jacot, Etude des antichocs, 2008.

P. Lambert, A. Chau, A. Delchambre, and S. Régnier, Comparison between Two Capillary Forces Models, Langmuir, vol.24, issue.7, p.3157, 2008.
DOI : 10.1021/la7036444

P. Lambert and A. Delchambre, Forces acting on microparts: towards a numerical approach for gripper design and manipulation strategies in micro-assembly, Proc. of the 1st Int. Precision Assembly Seminar (IPAS), pp.79-84, 2003.

P. Lambert and A. Delchambre, Capillary forces: Use and modelling in micro-assembly, Proceedings of the International Conference on Intelligent Manipulation and Grasping, pp.29-30, 2004.

P. Lambert and A. Delchambre, Design rules for a capillary gripper in microassembly, (ISATP 2005). The 6th IEEE International Symposium on Assembly and Task Planning: From Nano to Macro Assembly and Manufacturing, 2005., pp.67-73, 2005.
DOI : 10.1109/ISATP.2005.1511452

P. Lambert and A. Delchambre, Parameters Ruling Capillary Forces at the Submillimetric Scale, Langmuir, vol.21, issue.21, pp.9537-9543, 2005.
DOI : 10.1021/la0507131

P. Lambert and A. Delchambre, A study of capillary forces as a gripping principle, Assembly Automation, vol.25, issue.4, pp.275-283, 2005.
DOI : 10.1108/01445150510626406

P. Lambert and J. Jacot, Introduction à l'analyse dimensionnelle In Actes de la première journée sur la modélisation et l'anayse dimensionnelle, pp.1-9, 2005.

P. Lambert, B. Lagrange, A. Valentini, P. G. De-lit, C. Marsico et al., Design and performances of a piezoelectric stick-slip nanoactuator, Proceedings of the 12th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2002), pp.582-591, 2002.

P. Lambert, P. Letier, and A. Delchambre, Capillary and surface tension forces in the manipulation of small parts, Proceedings of the IEEE International Symposium onAssembly and Task Planning, 2003., pp.54-59, 2003.
DOI : 10.1109/ISATP.2003.1217187

P. Lambert, M. S. Lhernould, A. Chau, V. Vandaele, J. Valsamis et al., Surface forces modelling: Application to microassembly, Proc. of IARP, pp.23-24, 2006.
DOI : 10.1007/978-0-387-71089-1

P. Lambert, M. Mastrangeli, J. Valsamis, and G. Degrez, Spectral analysis and experimental study of lateral capillary dynamics (for flip-chip applications) Microfluid Nanofluid, 2010.

P. Lambert and S. Régnier, Surface and contact forces models within the framework of microassembly, Journal of Micromechatronics, vol.3, issue.2, pp.123-157, 2006.
DOI : 10.1163/156856306777544970

P. Lambert, F. Seigneur, S. Koelemeijer, and J. Jacot, A case study of surface tension gripping: the watch bearing, Journal of Micromechanics and Microengineering, vol.16, issue.7, pp.1267-1276, 2006.
DOI : 10.1088/0960-1317/16/7/021

P. Lambert, F. Seigneur, S. Koelemeijer, and J. Jacot, Design of a Capillary Gripper for a Submillimetric Application, Precision Assembly Technologies for Mini and Micro Products, pp.3-10, 2006.
DOI : 10.1007/0-387-31277-3_1

P. Lambert, F. Seigneur, S. Koelemeijer, J. Jacot, and A. Delchambre, Use of surface tension in micromanipulation, Proc. of the 7th NCTAM Congres, pp.29-30, 2006.

P. Lambert, A. Valentini, P. G. Benoit-lagrange, A. De-lit, and . Delchambre, Design and performances of a one-degree-of-freedom guided nano-actuator, Robotics and Computer-Integrated Manufacturing, vol.19, issue.1-2, pp.89-98, 2003.
DOI : 10.1016/S0736-5845(02)00065-0

P. Lambert, J. Valsamis, F. Seigneur, S. Koelemeijer, A. Delchambre et al., Surface tension gripping applied to mesoscopic case study, Proc. of the 1st CIRP -International Seminar on Assembly Systems, pp.153-158, 2006.

P. Lambert, V. Vandaele, and A. Delchambre, Non-contact handling in micro-assembly: State of the art, Svetan Ratchev and Alain BIBLIOGRAPHY

O. Lastow and W. Balachandran, Novel low voltage EHD spray nozzle for atomization of water in the cone jet mode, Journal of Electrostatics, vol.65, issue.8, pp.490-499, 2007.
DOI : 10.1016/j.elstat.2006.11.004

C. Lenders and . Dea, Study of valves used in microfluidics, 2006.

C. Lenders, Temporary title: Fluid-Structure Interaction in Micromechanics, 2010.

C. Lenders, M. Gauthier, and P. Lambert, Microbubble generation using a syringe pump, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009.
DOI : 10.1109/IROS.2009.5354524
URL : https://hal.archives-ouvertes.fr/hal-00432554

C. Lenders, J. Valsamis, M. Desaedeleer, A. Delchambre, and P. Lambert, Assembly of a Micro Ball-Bearing using a Capillary Gripper and a Microcomponent Feeder, Micro-Assembly Technologies and Applications. International Precision Assembly Seminar (IPAS), 2008.
DOI : 10.1007/978-0-387-77405-3_26

D. Lengacher, Capteur de forces pour antichoc horloger, 2008.

E. Leung, N. Jacobi, and T. Wang, Acoustic radiation force on a rigid sphere in a resonance chamber, The Journal of the Acoustical Society of America, vol.70, issue.6, pp.1762-1767, 1981.
DOI : 10.1121/1.387195

L. Marion-sausse, Theoretical and experimental study of electrostatic forces applied to micromanipulation: influence of surface topography, 2008.

P. Marion-sausse-lhernould, . Berke, J. Thierry, S. Massart, P. Régnier et al., Variation of the Electrostatic Adhesion Force on a Rough Surface due to the Deformation of Roughness Asperities During Micromanipulation of a Spherical Rigid Body, Journal of Adhesion Science and Technology, vol.462, issue.9, pp.1303-1325, 2009.
DOI : 10.1163/15685610360554384

A. Marion-sausse-lhernould, S. Delchambre, P. Régnier, and . Lambert, Displacement of an object placed in an electric field: application to micro-assembly, Proceedings of the EUSPEN 7th International Conference, 2007.

A. Marion-sausse-lhernould, S. Delchambre, P. Régnier, and . Lambert, Electrostatic forces and micromanipulator design: on the importance of surface topography parameters, Proceeding of the 2007 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2007.

A. Marion-sausse-lhernould, S. Delchambre, P. Régnier, and . Lambert, Electrostatic forces in micromanipulations: Review of analytical models and simulations including roughness, Applied Surface Science, vol.253, issue.14, pp.6203-6210, 2007.
DOI : 10.1016/j.apsusc.2007.01.098

P. Marion-sausse-lhernould, A. Lambert, and . Delchambre, Modelling of electrostatic forces for microassembly, Actes de la première journée sur la modélisation et l'analyse dimensionnelle (6 pages). EPFL, 2005.

P. Marion-sausse-lhernould, A. Lambert, S. Delchambre, and . Régnier, Influence of surface topography in electrostatic forces simulations for microassembly, Proc. of the 5th International Workshop on Microfactories, 2006.

M. Marion-sausse-lhernould, P. Pierobon, and . Lambert, Determination of ehd generated droplet size: Review of models and experimental tools, Proceedings of the European Aerosol Conference, 2009.

C. Lin, F. Tsen, C. Heng-chuan-kan, and . Chieng, Numerical studies on micropart self-alignment using surface tension forces, Microfluid Nanofluid, 2008.
DOI : 10.1007/s10404-008-0294-4

W. Lin, S. K. Patra, and Y. C. Lee, Design of solder joints for self-aligned optoelectronic assemblies, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B, vol.18, issue.3, pp.543-551, 1995.
DOI : 10.1109/96.404114

I. G. Loscertales, Micro/Nano Encapsulation via Electrified Coaxial Liquid Jets, Science, vol.295, issue.5560, p.1695, 2002.
DOI : 10.1126/science.1067595

H. Lu and C. Bailey, Dynamic analysis of flip-chip self-alignment, IEEE Transactions on Advanced Packaging, vol.28, issue.3, pp.475-480, 2005.
DOI : 10.1109/TADVP.2005.848371

M. Mastrangeli, W. Ruythooren, C. Van-hoof, and J. Celis, Conformal dip-coating of patterned surfaces for capillary die-to-substrate selfassembly, Journal of Micromechanics and Microengineering, vol.19, issue.4, p.12, 2009.

M. Mastrangeli, J. Valsamis, J. Van-hoof, P. Celis, and . Lambert, Lateral capillary forces of cylindrical fluid menisci: an experimental , analytical and numerical study, J. Micromech. Microeng, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00503889

C. H. Mastrangelo-ali-fallah-araghi, O. J. Miller, J. Baret, L. Frenz, A. Janoshazi et al., Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory, Journal of Microelectromechanical Systems, vol.2, issue.1, pp.33-434813, 1993.
DOI : 10.1109/84.232593

M. Meurisse and M. Querry, Squeeze Effects in a Flat Liquid Bridge Between Parallel Solid Surfaces, Journal of Tribology, vol.128, issue.3, pp.575-584, 2006.
DOI : 10.1115/1.2197525

M. Kumemura, D. Collard, and H. Fujita, Droplet formation and fusion for enzyme activity measurement by liquid dielectrophoresis, TRANSDUCERS 2009, 2009 International Solid-State Sensors, Actuators and Microsystems Conference, pp.813-816, 2009.
DOI : 10.1109/SENSOR.2009.5285715

I. Moon and J. Kim, Using EWOD (electrowetting-on-dielectric) actuation in a micro conveyor system, Sensors and Actuators A: Physical, vol.130, issue.131, pp.537-544, 2006.
DOI : 10.1016/j.sna.2005.12.016

F. Mugele and J. C. Baret, Electrowetting: from basics to applications, Journal of Physics: Condensed Matter, vol.17, issue.28, pp.705-75, 2005.
DOI : 10.1088/0953-8984/17/28/R01

K. Naessens, Eximer laser ablation of microstructures in polymers for photonic applications, 2004.

D. M. Newitt and C. , A contribution to the theory and practice of granulation, Trans. Inst. Chem. Engrs, vol.36, pp.422-442, 1958.

S. Nowak, A. Samadani, and A. Kudrolli, Maximum angle of stability of a wet granular pile, Nature Physics, vol.133, issue.1, pp.50-52, 2005.
DOI : 10.1038/nphys106

F. M. Orr, L. E. Scriven, and A. P. Rivas, Pendular rings between solids: meniscus properties and capillary force, Journal of Fluid Mechanics, vol.5, issue.04, pp.723-765, 1975.
DOI : 10.1063/1.1723251

D. E. Packham, Surface energy, surface topography and adhesion, International Journal of Adhesion and Adhesives, vol.23, issue.6, pp.437-485, 2003.
DOI : 10.1016/S0143-7496(03)00068-X

J. F. Padday, G. Pétré, C. G. Rusu, J. Gamero, and G. Wozniak, The shape, stability and breakage of pendant liquid bridges, Journal of Fluid Mechanics, vol.352, pp.177-204, 1997.
DOI : 10.1017/S0022112097007234

C. Pagano, L. Zanoni, I. Fassi, and F. Jovane, Micro-assembly: design and analysis of a gripper based on capillary force, Proc. of the 1st CIRP - International Seminar on Assembly Systems, pp.165-170, 2006.

N. W. Pascarella and D. F. Baldwin, Compression flow modeling of underfill encapsulants for low cost flip chip assembly, Proc. of 1998 International Symposium of Underfill Encapsulants for Low Cost Flip Chip Assembly, p.33, 1998.

X. Pepin, D. Rossetti, S. M. Iveson, and S. J. Simons, Modeling the Evolution and Rupture of Pendular Liquid Bridges in the Presence of Large Wetting Hysteresis, Journal of Colloid and Interface Science, vol.232, issue.2, pp.289-97, 2000.
DOI : 10.1006/jcis.2000.7182

L. Picarelli, L. Olivares, L. Comegna, and E. Damiano, Mechanical Aspects of Flow-Like Movements in Granular and Fine Grained Soils, Rock Mechanics and Rock Engineering, vol.51, issue.7, pp.179-197, 2008.
DOI : 10.1007/s00603-007-0135-x

R. Pit, H. Hervet, and L. Léger, Direct Experimental Evidence of Slip in Hexadecane: Solid Interfaces, Physical Review Letters, vol.85, issue.5, pp.980-983, 2000.
DOI : 10.1103/PhysRevLett.85.980

O. Pitois, P. Moucheront, and X. Chateau, Liquid Bridge between Two Moving Spheres: An Experimental Study of Viscosity Effects, Journal of Colloid and Interface Science, vol.231, issue.1, pp.26-31, 2000.
DOI : 10.1006/jcis.2000.7096

J. A. and F. Plateau, Statique expérimentale et théorique des liquides soumis aux seules forces moléculaires, p.1873

. Yu, V. Plevachuk, S. Sklyarchuk, G. Eckert, and . Gerbeth, Some physical data of the near eutectic liquid lead-bismuth, Journal of Nuclear Materials, vol.373, pp.335-342, 2008.

. Yu, V. Plevachuk, A. Sklyarchuk, B. Yakymovych, S. Willers et al., Electronic properties and viscosity of liquid pb-sn alloys, Journal of Alloys and Compounds, vol.394, pp.63-68, 2005.

L. C. Prasad and A. Mikula, Role of surface properties on the wettability of Sn???Pb???Bi solder alloys, Journal of Alloys and Compounds, vol.282, issue.1-2, pp.279-285, 1999.
DOI : 10.1016/S0925-8388(98)00831-7

Y. I. Rabinovich, J. J. Adler, M. S. Esayanur, A. Ata, R. K. Singh et al., Capillary forces between surfaces with nanoscale roughness, Advances in Colloid and Interface Science, vol.96, issue.1-3, pp.213-243, 2002.
DOI : 10.1016/S0001-8686(01)00082-3
URL : http://ufdc.ufl.edu/LS00000007/00003

I. Yakov, . Rabinovich, S. Madhavan, B. M. Esayanur, and . Mougdil, Capillary forces between two spheres with a fixed volume liquid bridge: Theory and experiment, Langmuir, vol.21, pp.10992-10999, 2005.

R. Ragucci, F. Fabiani, A. Cavaliere, P. Muscetta, and C. Noviello, Characterization of stability regimes of electrohydrodynamically enhanced atomization, Experimental Thermal and Fluid Science, vol.21, issue.1-3, pp.156-161, 2000.
DOI : 10.1016/S0894-1777(99)00066-7

V. Raman and P. Lambert, Recueil d'exercices pour le cours de mécanique rationnelle (ba1) Presses Universitaires de Bruxelles Frédéric Restagno, Lydéric Bocquet, and Thierry Biben. Metastability and nucleation in capillary condensation, Phys. Rev. Lett, vol.161, issue.8411, pp.2433-2439, 2000.

F. Robert, V. Duchateau, V. Raman, C. Boey, N. Postiaux et al., Détecter les préconceptions pour corriger les représentations erronées des étudiants: application à la mécanique et à l'électronique, Congrès AIPU (Association Internationale de Pédagogie Universitaire), 2007.

I. Rudnick, Measurements of the acoustic radiation pressure on a sphere in a standing wave field, The Journal of the Acoustical Society of America, vol.62, issue.1, pp.20-22, 1977.
DOI : 10.1121/1.381486

A. J. Rulison and R. C. Flagan, Scale???up of electrospray atomization using linear arrays of Taylor cones, Review of Scientific Instruments, vol.64, issue.3, pp.683-686, 1993.
DOI : 10.1063/1.1144197

S. Saito, T. Motokado, K. J. Obata, and K. Takahashi, Capillary force with a concave probe-tip for micromanipulation, Applied Physics Letters, vol.87, issue.23, 2005.
DOI : 10.1063/1.2139848

O. V. Salata, Tools of Nanotechnology: Electrospray, Current Nanoscience, vol.1, issue.1, pp.25-33, 2005.
DOI : 10.2174/1573413052953192

V. Sariola, Q. Zhou, R. Laass, and H. N. Koivo, Experimental study on droplet based hybrid microhandling using high speed camera, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.919-924, 2008.
DOI : 10.1109/IROS.2008.4651009

D. Schmid, S. Koelemeijer, J. Jacot, and P. Lambert, Microchip assembly with capillary gripper, Proc. of the 5th International Workshop on Microfactories, pp.25-27, 2006.

F. Schoenfeld and K. S. Drese, Modelling and SImulation of Micro Fluidic Systems, 2005.

K. F. Bohringer-sheng-hsiung-liang and X. Xiong, Towards optimal designs for self-alignment in surface tension driven micro-assembly, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest, pp.9-12, 2004.
DOI : 10.1109/MEMS.2004.1290509

L. Sirghi, R. Szoszkiewicz, and E. Riedo, Volume of a Nanoscale Water Bridge, Langmuir, vol.22, issue.3, pp.1093-1101, 2005.
DOI : 10.1021/la052167h

F. Soulié, F. Cherblanc, M. S. Youssoufi, and C. Saix, Influence of liquid bridges on the mechanical behaviour of polydisperse granular materials, International Journal for Numerical and Analytical Methods in Geomechanics, vol.117, issue.122, pp.213-228, 2006.
DOI : 10.1002/nag.476

T. Stifter, O. Marti, and B. Bhushan, Theoretical investigation of the distance dependence of capillary and van der Waals forces in scanning force microscopy, Physical Review B, vol.62, issue.20, pp.13667-73, 2000.
DOI : 10.1103/PhysRevB.62.13667

A. Takei, K. Matsumoto, and I. Shimoyama, Capillary Torque Caused by a Liquid Droplet Sandwiched between Two Plates, Langmuir, vol.26, issue.4, pp.2497-2504, 2009.
DOI : 10.1021/la902779g

E. Tam, M. S. Lhernould, P. Lambert, A. Delchambre, and M. Delplancke, Electrostatic forces in micromanipulation: Experimental characterization and simulation including roughness, Applied Surface Science, vol.255, issue.18, pp.7898-7904, 2009.
DOI : 10.1016/j.apsusc.2009.04.150

K. Tang and A. Gomez, Generation of Monodisperse Water Droplets from Electrosprays in a Corona-Assisted Cone-Jet Mode, Journal of Colloid and Interface Science, vol.175, issue.2, pp.326-332, 1995.
DOI : 10.1006/jcis.1995.1464

L. H. Tanner, The spreading of silicone oil drops on horizontal surfaces, Journal of Physics D: Applied Physics, vol.12, issue.9, pp.1473-1484, 1979.
DOI : 10.1088/0022-3727/12/9/009

M. Tichem, F. Bourgeois, P. Lambert, V. Vandaele, and D. Lang, Capturing micro-assembly process windows on process data sheets, (ISATP 2005). The 6th IEEE International Symposium on Assembly and Task Planning: From Nano to Macro Assembly and Manufacturing, 2005., pp.19-21, 2005.
DOI : 10.1109/ISATP.2005.1511453

C. G. Tsai, C. M. Hsieh, and J. A. Yeh, Self-alignment of microchips using surface tension and solid edge, Sensors and Actuators A: Physical, vol.139, issue.1-2, pp.343-349, 2007.
DOI : 10.1016/j.sna.2007.04.019

J. Valsamis, A Study of Liquid Bridges Dynamics: an Application to micro-Assembly

J. Valsamis, A. Delchambre, and P. Lambert, An experimental study of prehension parameters during manipulation task, Proc. of the 5th International Workshop on Microfactories, pp.25-27, 2006.

N. Van-veen, Analytical Derivation of the Self-Alignment Motion of Flip Chip Soldered Components, Journal of Electronic Packaging, vol.121, issue.2, pp.116-121, 1999.
DOI : 10.1115/1.2792665

V. Vandaele, Contactless handling for micro-assembly: acoustic levitation, 2008.

V. Vandaele, P. Lambert, and A. Delchambre, Non-contact handling in microassembly: Acoustical levitation, Precision Engineering, vol.29, issue.4, pp.491-505, 2005.
DOI : 10.1016/j.precisioneng.2005.03.003

V. Vandaele, P. Lambert, A. Delchambre, and P. Bouillard, Design and Implementation of a Flexible Guiding System in Translation
DOI : 10.1007/978-3-642-18727-8_44

O. D. Velev, B. G. Prevo, and K. H. Bhatt, On-chip manipulation of free droplets, Nature, vol.426, issue.6966, p.515, 2003.
DOI : 10.1038/426515a

J. Vitard, P. Lambert, A. Chau, and S. Régnier, Capillary forces models for the interaction between a cylinder and a plane, Proc. of the 5th International Workshop on Microfactories, pp.25-27, 2006.

J. Vitard, P. Lambert, and S. Régnier, Study of cylinder/plan capillary force near millimeter scale and experimental validation, 2007 IEEE International Symposium on Assembly and Manufacturing, 2007.
DOI : 10.1109/ISAM.2007.4288476

O. V. Voinov, Hydrodynamics of wetting. Fluid Dynamics, pp.714-721, 1976.

?. ?ikalo, H. D. Wilhelm, I. V. Roisman, S. Jakirli´cjakirli´c, and C. Tropea, Dynamic contact angle of spreading droplets: Experiments and simulations, Physics of Fluids, vol.17, issue.6, pp.1-13, 2005.
DOI : 10.1063/1.1928828

E. W. Washburn, The Dynamics of Capillary Flow, Physical Review, vol.17, issue.3, pp.273-283, 1921.
DOI : 10.1103/PhysRev.17.273

B. Wee, M. Kumemura, D. Collard, and H. Fujita, Isolation of single dna molecule in a picolitre-sized droplet formed by liquid dielectrophoresis, Proc. of the 12th Internation Conference on Miniaturized Systems for Life Sciences, 2008.

R. N. Wenzel, RESISTANCE OF SOLID SURFACES TO WETTING BY WATER, Industrial & Engineering Chemistry, vol.28, issue.8, p.988, 1936.
DOI : 10.1021/ie50320a024

D. Wu, N. Fang, C. Sun, and X. Zhang, Stiction problems in releasing of 3D microstructures and its solution, Sensors and Actuators A: Physical, vol.128, issue.1, pp.109-124, 2006.
DOI : 10.1016/j.sna.2005.12.041

H. Xie, S. Haliyo, and S. Régnier, A versatile atomic force microscope for three-dimensional nanomanipulation and nanoassembly, Nanotechnology, vol.20, issue.21, p.215301, 2009.
DOI : 10.1088/0957-4484/20/21/215301

F. Yan, B. Farouk, and F. Ko, Numerical modeling of an electrostatically driven liquid meniscus in the cone???jet mode, Journal of Aerosol Science, vol.34, issue.1, pp.99-116, 2002.
DOI : 10.1016/S0021-8502(02)00146-5

J. Zeng, D. Sobek, and T. Korsmeyer, Electro-hydrodynamic modeling of electrospray ionization: Cad for a ?fluidic device -mass spetrometer interface, 2003.

W. Zesch, M. Brunner, and A. Weber, Vacuum tool for handling microobjects with a NanoRobot, Proceedings of International Conference on Robotics and Automation, pp.1761-1766, 1997.
DOI : 10.1109/ROBOT.1997.614405

W. Zesch, Multi-Degree-of-Freedom Micropositioning Using Stepping Principles, 1997.