. Broissin, Contribution à l'amélioration de la réactivité des systèmes de production automatisés et flexibles grâce à un pilotage basé sur une génération de tâches décentralisée, Thèse de Doctorat en Sciences, 1999.

F. A. Brooks, A. M. Brooks, and . Flynn, Fast, cheap and out of control : a robot invasion of the solar system, Journal of British Interplanetary Society, vol.42, pp.478-485, 1989.

]. R. Brooks, The Role of Learning in Autonomous Robots, Proceedings of the Fourth Annual Workshop on Computational Learning Theory (COLT '91), pp.5-10, 1991.
DOI : 10.1016/B978-1-55860-213-7.50005-5

. Browne, Production Management Systems ? an integrated perspective, 1996.

. Browne, Extended and virtual enterprises ??? similarities and differences, International Journal of Agile Management Systems, vol.1, issue.1, pp.30-36, 1999.
DOI : 10.1108/14654659910266691

]. D. Brun-picard and . Brun-picard, Contribution à l'élaboration d'un modèle de commande décentralisée, Thèse de Doctorat ès Sciences, 1988.

. Burke, ]. P. Prosser, P. Burke, and . Prosser, A distributed asynchronous system for predictive and reactive scheduling, Artificial Intelligence in Engineering, vol.6, issue.3, pp.3-106, 1991.
DOI : 10.1016/0954-1810(91)90034-L

. Butala, ]. P. Sluga, A. Butala, and . Sluga, Dynamic structuring of distributed manufacturing systems, Advanced Engineering Informatics, vol.16, issue.2, pp.127-133, 2002.
DOI : 10.1016/S1474-0346(02)00007-1

]. J. Camalot, aide à la décision et à la coopération en gestion du temps et des ressources, 2000.

. Campagne, A famework to specify a reactive and proactive management system, ETFA'95 Symposiun on Emerging Technologies and Factory Automation, INRIA/IEEE, Institut national de Recherche en Informatique Et en Automatique, 1995.

. Campagne, Special Session on Cooperative and Coordinated Decision in Distributed Enterprise On Management and Control of Production and Logistics, pp.1019-1020, 2000.

]. M. Cantamessa, Agent-based modeling and management of manufacturing systems, Computers in Industry, vol.34, issue.2, pp.173-186, 1997.
DOI : 10.1016/S0166-3615(97)00053-5

. Caridi, ]. M. Sianesi, A. Caridi, and . Sianesi, Multi-agent systems in production planning and control: An application to the scheduling of mixed-model assembly lines, International Journal of Production Economics, vol.68, issue.1, pp.29-42, 2000.
DOI : 10.1016/S0925-5273(99)00097-3

C. Et-dorigo, ]. D. Caro, and M. Dorigo, AntNet : Distributed Stigmergic Control for Communications Networks, Journal of Intelligence Research, vol.9, pp.317-365, 1998.

. Cavalieri, An experimental benchmarking of two multi-agent architectures for production scheduling and control, Conputers in Industry, pp.139-152, 2000.
DOI : 10.1016/S0166-3615(00)00063-4

C. Et-cetnarowicz, ]. K. Cetnarowicz, E. Cetnarowicz, and I. Conf, Multi-agent decentralised system of medical help On Management and Control of Production and Logistics, pp.463-467, 2000.

. Cetnarowicz, Multi-agent MRP class system for production and dissassembling On Management and Control of Production and Logistics, pp.439-444, 2000.

. Gzara, Fuzzy Multi-criteria scheduling support tool for complex industrial systems, International Journal of Fuzzy Systems, 2002.

H. Et-najid, ]. Y. Hafri, and N. M. Najid, Utilisation de l'approche multi-agents pour le pilotage en temps réel des systèmes de production, 3 ème Conférence MOSIM'01, Modélisation et simulation, pp.255-262, 2001.

. Hirsch, A conceptual system support framework for distributed product development and manufacturing, in Life cycle modelling for innovative products and processes, Chapman&Hall, pp.553-564, 1995.

]. P. Huguet, Conception de systèmes de pilotage d'atelier : modèles de référence et adaptation d'une méthodologie objet, 1996.

]. I. Technology, SADT : un langage pour communiquer, éditions Eyrolles Contribution à l'élaboration d'une démarche de spécification fonctionnelle, Japon Thèse de Doctorat, 1989.

. Khoo, Agent-based multiple shop floor manufacturing scheduler, International Journal of Production Research, vol.39, issue.14, pp.3023-3040, 2001.
DOI : 10.1080/00207540110053552

. Kim, A distributed scheduling and shop floor control method, Computer and Industrial Engineering, vol.31, pp.3-4, 1996.

]. J. Kimemia, Hierarchical control of production in flexible manufacturing systems, 1982.

]. A. Koestler, The Ghost in the Machine, Arkana Books, 1967.

. Kondoh, Self Organization of Cellular Manufacturing Systems, CIRP Annals - Manufacturing Technology, vol.49, issue.1, pp.347-350, 2000.
DOI : 10.1016/S0007-8506(07)62961-8

. Kouiss, Using multi-agent architecture in FMS for dynamic scheduling, Journal of Intelligent Manufacturing, vol.8, issue.1, pp.41-47, 1997.
DOI : 10.1023/A:1018540317470

K. Et-pierreval, ]. K. Kouiss, H. Pierreval, and H. , Pilotage réactif d'une cellule flexible de l'Ifma, Modélisation des systèmes réactifs ? MSR'99, J.J. Lesage coord, pp.417-426, 1999.

. Krothapalli, ]. N. Deshmukh, A. V. Krothapalli, and . Deshmukh, Effects of negociation mechanisms on performance agent-based manufacturing systems, Proc. of the 7 th international conference on flexible automation and intelligent manufacturing, pp.704-717, 1997.

]. I. Landau, Identification et commande des systèmes, Hermès, 2 ème éd, 1996.

P. Et-ounnar, ]. P. Pujo, and F. Ounnar, Proposition d'un pilotage décentralisé auto-organisé et rapproché pour système automatisé flexible ? application à un hub de transbordement robotisé fer/fer, Journal Européen des Systèmes Automatisés, vol.35, pp.905-932, 2001.

. Rabelo, Multi-agent-based agile scheduling, Robotics and Autonomous Systems, vol.27, issue.1-2, pp.15-28, 1999.
DOI : 10.1016/S0921-8890(98)00080-3

]. J. Rasmussen, Skills, rules, and knowledge; signals, signs, and symbols, and other distinctions in human performance models, IEEE Transactions on Systems, Man, and Cybernetics, vol.13, issue.3, pp.257-266, 1983.
DOI : 10.1109/TSMC.1983.6313160

]. A. Rolstadas, Entreprise modelling for competitive manufacturing, International Journal of Control Engineering Practice, vol.31, pp.43-50, 1995.

]. and D. T. Ross, Structured Analysis (SA): a language for communicating ideas, IEEE Trans. On Software Engineering, vol.3, issue.1, 1977.

. Roubellat, Ordonnancement d'atelier en temps réel: d'ORABAID à ORDO, Revue d'Automatique et de Productique Appliquée, pp.5-683, 1995.

R. Et-bouyssou, ]. B. Roy, and D. Bouyssou, Aide multicritère à la décision : méthode et cas, 1993.

]. D. Roy, Une architecture hiérarchisée multi-agents pour le pilotage réactif d'ateliers de production, Thèse de doctorat, 1998.

R. Et-anciaux, ]. D. Roy, and D. Anciaux, Shop-floor control : a multi-agent approach, International journal of computer integrated manufacturing, vol.14, issue.6, pp.535-544, 2001.

]. A. Sage, Complex systems and the IEEE-SMC society : the evolution and interaction of cybernetics, systems humans and organizations, Plenary talk, 2000.

]. K. Samyn, Taakverdeling in een gedistribueerd computersysteem, Koninklijke militaire school, rapport de projet pour l'obtention du grade d'ingénieur polytechnique, 1998.

. Sanchis, Agents logiciels mobiles, facilitateurs de l'émergence de solution en co-conception et en conception distribuée, 4ème congrès international de génie industriel, IUSPIM, pp.45-55, 2001.

]. O. Sénéchal-et-trentesaux, D. Sénéchal, and . Trentesaux, Evaluation en phase d'exploitation du système de production, Evaluation des performances des systèmes de production, C. Tahon (coord.), traité IC2, Hermès Sciences Publication, 2002.

]. W. Shen-et-barthès, J. P. Shen, and . Barthès, A Distributed Architecture for Design Environment Using Asynchronous Cognitive Agents, proc, of the Second Singapore International Conference on Intelligent Systems, 1994.

. Shen, Agent-based approaches for advanced CAD/CAM systems, Proc. of the Fifth International Conference on CAD/Graphics, pp.609-615, 1997.

. Shen, An Agent-Based Manufacturing Enterprise Infrastructure for Distributed Integrated Intelligent Manufacturing Systems, Proceedings of PAAM'98, 1998.

]. W. Shen-et-norrie, D. H. Shen, and . Norrie, Agent-Based Systems for Intelligent Manufacturing: A State-of-the-Art Survey, Knowledge and Information Systems, vol.9, issue.4, pp.129-156, 1999.
DOI : 10.1007/BF03325096

. Shih, ]. W. Srihari, K. Shih, and . Srihari, Distributed Artificial Intelligence in manufacturing systems control, Computers & Industrial Engineering, vol.29, issue.1-4, pp.199-203, 1005.
DOI : 10.1016/0360-8352(95)00071-8

]. H. Simon, The new science of management decision, 1977.
DOI : 10.1037/13978-000

]. R. Smith, The Contract Net Protocol: High-Level Communication and Control in a Distributed Problem Solver, IEEE Transactions on Computers, vol.29, issue.12, pp.12-1104, 1980.
DOI : 10.1109/TC.1980.1675516

D. G. Smith, R. Smith, and . Davis, Frameworks for Cooperation in Distributed Problem Solving, IEEE Transactions on Systems, Man, and Cybernetics, vol.11, issue.1, 1981.
DOI : 10.1109/TSMC.1981.4308579

]. C. Sohier, Pilotage des cellules adaptatives de production : apport des systèmes multi-agents, 1996.

. Sohier, Lesage, eco-problem solving for the adaptive control of production systems : the casper project, 9 th INCOM symposium, pp.65-70, 1998.

]. P. Sousa-et-ramos, C. Sousa, and . Ramos, A distributed architecture and negotiation protocol for scheduling in manufacturing systems, Computers in Industry, vol.38, issue.2, pp.103-113, 1999.
DOI : 10.1016/S0166-3615(98)00112-2

]. B. Stroustrup, The C++ programming Language, 3 ème Edition, 1997.

M. Szelke, G. Szelke, and . Markus, A learning reactive scheduler using CBR/L, Computers in Industry, vol.33, issue.1, pp.31-46, 1997.
DOI : 10.1016/S0166-3615(97)00009-2

T. Et-trentesaux, ]. C. Tahon, C. Et, and D. Trentesaux, Aide à la décision en gestion de production, in Organisation et gestion de production, traité IC2, Hermès Sciences Publication, pp.171-218, 2001.

. Takahashi, ]. K. Nakamura, N. Takahashi, and . Nakamura, Decentralized reactive Kanban system, European Journal of Operational Research, vol.139, issue.2, pp.262-276, 2002.
DOI : 10.1016/S0377-2217(01)00358-7

]. J. Tchako, Contribution à la conception d'un système de pilotage distribué pour les systèmes automatisés de production, Thèse de Doctorat en Sciences, 1994.

. Tchako, Modelling with coloured timed Petri nets and simulation of a dynamic and distributed management system for a manufacturing cell, International Journal of Computer Integrated Manufacturing, vol.4, issue.6, pp.323-339, 1994.
DOI : 10.1109/TC.1984.1676389

. Tharumarajah, Comparison of the bionic, fractal and holonic manufacturing system concepts, International Journal of Computer Integrated Manufacturing, vol.9, issue.3, pp.217-226, 1996.
DOI : 10.1080/095119296131670

]. A. Tharumarajah, Survey of resource allocation methods for distributed manufacturing systems, Production, Planning & Control, pp.58-68, 2001.

]. D. Thiel, Enquête et analyse des décisions dans les systèmes de production, APII, vol.27, issue.2, pp.167-188, 1993.

T. Et-trentesaux, ]. P. Thomin, and D. Trentesaux, Modèle de simulation de convoyeurs à haute cadence, 2ème conférence Modélisation et Simulation des flux physiques et informationnels, SCS International, pp.99-297, 1999.

]. T. Tomiyama, A Manufacturing Paradigm Toward the 21st Century, Integrated Computer Aided Engineering, vol.4, issue.3, pp.159-178, 1997.

. Tonarelli, Proposition d'un système d'information pour le pilotage du cycle de vie d'un produit complexe Application au domaine de la construction, nd international conference on Decision Making in Urban and Civil Engineering, pp.969-980, 2000.

. Tranvouez, Résolution coopérative et distribuée de problèmes : une application multi-agents au ré-ordonnancement d'atelier, congrès GI, pp.1543-1552, 1999.

]. E. Tranvouez, IAD et ordonnancement, une approche coopérative du réordonnancement par systèmes multi-agents, Thèse de Doctorat en Sciences, 2001.

. Trentesaux, D-Sign : un cadre méthodologique pour l'ordonnancement décentralisé et réactif, Journal Européen des Systèmes Automatisés, vol.35, pp.933-962, 2001.

. Trentesaux, Proposition d'un système de pilotage décentralisé pour l'aide à la conception de produits complexes, 4 ème congrès international de génie industriel, IUSPIM, pp.1187-1196, 2001.

. Trentesaux, ]. D. Sénéchal, O. Trentesaux, and . Sénéchal, Conduite des systèmes de production manufacturière, 2002.

T. Et-tahon, ]. D. Trentesaux, D. Et, and C. Tahon, Ordonnancement distribué dans les ateliers flexibles, in organisation et application des, Hermès Sciences Publication, pp.293-305, 2002.

]. K. Ueda, Synthesis and emergence ??? research overview, Artificial Intelligence in Engineering, vol.15, issue.4, pp.321-327, 2001.
DOI : 10.1016/S0954-1810(01)00022-X

. Ueda, Emergent Synthesis Methodologies for Manufacturing, CIRP Annals - Manufacturing Technology, vol.50, issue.2, pp.2-536, 2001.
DOI : 10.1016/S0007-8506(07)62994-1

. Ulieru, A multi-resolution collaborative architecture for web-centric global manufacturing, Information Sciences, vol.127, issue.1-2, pp.3-21, 2000.
DOI : 10.1016/S0020-0255(00)00026-8

. Van-brussel, Reference architecture for holonic manufacturing systems: PROSA, Computers in industry, pp.255-274, 1998.

]. E. Van-leeuven-et-norrie, D. H. Van-leeuwen, and . Norrie, Intelligent manufacturing: holons and holarchies, Manufacturing Engineer, vol.76, issue.2, pp.86-88, 1997.

]. J. Vautier, Systèmes complexes : Présentation générale, Techniques de l'ingénieur, traité L'entreprise industrielle, pp.500-501, 2001.

]. H. Warneke, Fractal Company, Acta Mechanica Slovaca, vol.13, issue.3, 1993.
DOI : 10.2478/v10147-010-0041-1

. Zhang, Design and implementation of a real-time holonic control system for manufacturing, Information Sciences, vol.127, issue.1-2, pp.23-44, 2000.
DOI : 10.1016/S0020-0255(00)00027-X

]. G. Zwingelstein, Diagnostic des défaillances : théorie et pratique pour les systèmes industriels, traité des nouvelles technologies, éd. hermès, 1995.

]. G. Zwingelstein, La maintenance basée sur la fiabilité ? guide pratique d'application de la RCM, diagnostic et maintenance, 1996.