¨ Contribution à l'étude et au diagnostic de la machine asynchrone¨, Thèse de doctorat, 2002. ,
Low Order PWM Inverter Harmonics Contributions to the Inverter-Fed Induction Machine Fault Diagnosis, Industrial Electronics IEEE Transactions on, vol.55, issue.2, pp.610-619, 2008. ,
Eccentricity Fault Diagnosis of a Dual-Stator Winding Induction Machine Drive Considering the Slotting Effects, IEEE Transactions on Industrial Electronics, vol.55, issue.12, pp.4238-4251, 2008. ,
DOI : 10.1109/TIE.2008.2004664
URL : https://hal.archives-ouvertes.fr/hal-00440401
Modelling and simulation of induction motors with inter-turn faults for diagnostics, Electric Power Systems Research, vol.75, issue.1, pp.57-66, 2005. ,
DOI : 10.1016/j.epsr.2004.08.015
Minimization of Cogging Torque in Axial-Flux Permanent-Magnet Machines: Design Concepts, IEEE Transactions on Magnetics, vol.43, issue.9, 2007. ,
DOI : 10.1109/TMAG.2007.902818
Diagnosis by parameter estimation of stator and rotor faults occurring in induction machines, IEEE Transactions on Industrial Electronics, vol.53, issue.3, pp.963-973, 2006. ,
DOI : 10.1109/TIE.2006.874258
¨ Modelling rotor cage induction motors for default detection¨, IEEE International SDEMPED, pp.41-47, 1997. ,
¨Towards a correct quantification of induction machines broken bars through input electric signals¨, ICEM'00, Finland, pp.781-785, 2000. ,
Design techniques for reducing cogging torque in surface mounted PM motors, IEEE Trans. Industrial Application, vol.38, issue.5, 2002. ,
Electrical Machine Analysis using Finite Elements, 2005. ,
Analysis and Design of a PM Brushless Motor for High-Speed Operations", Energy conversion, IEEE transactions on, issue.3, pp.20-629, 2005. ,
Tolerant PM Motors in Automotive Applications, IEEE Conf. on Vehicle and power propulsion, pp.747-755, 2005. ,
Diagnostic, maintenance, disponibilité des machines tournantes, Editions MASSON, 1994. ,
Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors, IEEE Transactions on Industry Applications, vol.28, issue.4, pp.921-937, 1992. ,
DOI : 10.1109/28.148460
Cause and analysis of Anti-Friction Bering Failures in A.C Induction Motors, IEEE Transactions on Industry Application, pp.14-23, 1993. ,
Back-EMF Based Detection of Stator Winding Inter-turn Fault for PM Synchronous Motor Drives, 2007 IEEE Vehicle Power and Propulsion Conference, pp.95-100, 2007. ,
DOI : 10.1109/VPPC.2007.4544105
SERRA ; ¨Minimizing torque ripple in permanent magnet synchronous motors with polymer-bonded magnets¨,magnets¨Shaft misalignment diagnosis of induction motors using current spectral analysis : A theoretical approach, Proc. International Conference on Electrical Machines (ICEM), pp.1371-1377, 2002. ,
Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's vector approach, IEEE Transactions on Energy Conversion, vol.14, issue.3, 1999. ,
DOI : 10.1109/60.790920
Stator fault diagnosis in three-phase synchronous and asynchronous motors, IEEE Transaction on Industrial Applications, vol.37, issue.5, 2001. ,
Fault Detection in Induction Machines by Using Power Spectral Density on the Wavelet Decompositions, 37th IEEE Power Electronics Specialists Conference, pp.633-643, 2008. ,
DOI : 10.1109/PESC.2006.1712271
Fault Analysis of a PM Brushless DC Motor Using Finite Element Method, IEEE Transactions on Energy Conversion, vol.20, issue.1, 2005. ,
DOI : 10.1109/TEC.2004.841516
An accurate model of squirrel cage induction machines under static, dynamic or mixed eccentricity, Proc. IEEE SDEMPED, pp.121-126, 2001. ,
A new approach to detect broken rotor bars in induction machines by current spectrum analysis, Mechanical Systems and Signal Processing, vol.21, issue.2, pp.1127-1142 ,
DOI : 10.1016/j.ymssp.2006.03.002
URL : https://hal.archives-ouvertes.fr/hal-00115405
Design and Analysis of Different Line-Start PM Synchronous Motors for Oil-Pump Applications, IEEE Transactions on Magnetics, vol.45, issue.3, pp.1816-1819, 2009. ,
DOI : 10.1109/TMAG.2009.2012772
Detection of broken bars in the cage rotor on an induction machine, IEEE Transactions on Industry Applications, vol.28, issue.1, pp.165-171, 1992. ,
DOI : 10.1109/28.120226
Modelling and simulation of stator winding inter-turn faults in permanent magnet synchronous motors, p.27, 2008. ,
Recent developments of induction motor drives fault diagnosis using AI techniques, IEEE Transactions on Industrial Electronics, vol.47, issue.5, pp.994-1004, 2000. ,
DOI : 10.1109/41.873207
Broken bar detection in induction machines: comparison between current spectrum approach and parameter estimation approach, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting, pp.94-102, 1999. ,
DOI : 10.1109/IAS.1994.345493
Dimensionnement rapide des machines synchrones à aimants permanents (MSAP), Editions Technique ,
Integrated PM Machine Design for an Aircraft EMA, IEEE Transactions on Industrial Electronics, vol.55, issue.9, pp.3300-3306, 2008. ,
DOI : 10.1109/TIE.2008.927970
Torque Ripple Reduction of Interior Permanent Magnet Synchronous Motor Using Harmonic Injected Current, IEEE Transactions on Magnetics, vol.44, issue.6, pp.1582-1585, 2006. ,
DOI : 10.1109/TMAG.2008.915776
Design of small electrical machines, 1994. ,
¨Open-circuit field distribution in a brushless motor with diamatically magnetized PM rotor, accounting for slotting, and eddy current effects¨, IEEE Trans.Trans. Magnetics, vol.32, issue.5, pp.5070-5072, 1996. ,
Design, Prototyping, and Analysis of a Low Cost Axial-Flux Coreless Permanent-Magnet Generator, IEEE Transactions on Magnetics, vol.44, issue.1, 2008. ,
DOI : 10.1109/TMAG.2007.909563
¨ A Method for the simulation of inter-turn short circuits in squirrel cage induction machines¨, 2002. ,
A winding function theory based global method for the simulation of faulty induction machines, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03., 2003. ,
DOI : 10.1109/IEMDC.2003.1211279
Trends in the application of model-based fault detection and diagnosis of technical processes, Control Engineering Practice, vol.5, issue.5, pp.709-719, 1997. ,
DOI : 10.1016/S0967-0661(97)00053-1
¨ A method of reducing ripple torque in permanent magnet motorswithout skewing¨, IEEE Transactions on Magnetics, 1993. ,
Design of a miniature permanentmagnet generator and energy storage system, Industrial Electronics IEEE Transactions on, issue.5, pp.52-1383, 2005. ,
The detection of inter-turn short circuits in the stator windings of operating motors, IEEE Transactions on Industrial Electronics, vol.47, issue.5, pp.1078-1084, 2000. ,
DOI : 10.1109/41.873216
Online Diagnosis of Induction Motors Using MCSA, IEEE Transactions on Industrial Electronics, vol.53, issue.6, pp.1842-1852, 2006. ,
DOI : 10.1109/TIE.2006.885131
Estimation of stator winding faults in induction motors using an adaptive observer scheme, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004. ,
DOI : 10.1109/IAS.2004.1348569
Mitigation of Torque Ripple in Interior Permanent Magnet Motors by Optimal Shape Design, IEEE Transactions on Magnetics, vol.42, issue.11, pp.3706-3711, 2006. ,
DOI : 10.1109/TMAG.2006.881093
Noninvasive detection of broken rotor bars in operating induction motors, IEEE Transactions on Energy Conversion, vol.3, issue.4, pp.873-879, 1988. ,
DOI : 10.1109/60.9364
A new approach to on-line turn fault detection in AC motors, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting, 1996. ,
DOI : 10.1109/IAS.1996.557113
Investigation of high voltage stator winding vibrations in fullscale slot model, Electrical Insulation Conference, pp.155-166, 1997. ,
Sensorless fault diagnosis of induction motors, IEEE Transactions on Industrial Electronics, vol.50, issue.5, pp.1038-1051, 2003. ,
DOI : 10.1109/TIE.2003.817693
Machines électriques tournantes: conception, dimensionnement, fonctionnement, Editeur Ellipses, 2007. ,
Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors, IEEE Transactions on Magnetics, vol.42, issue.3, pp.442-445, 2006. ,
DOI : 10.1109/TMAG.2005.862756
A robust on-line turn-fault detection technique for induction machin es based on monitoring the sequence component impedance matrix, IEEE transaction on power electronics, vol.18, issue.3, 2003. ,
Multiple coupled circuit modelling of induction machines, IEEE Trans. Industrial Application, vol.31, pp.311-317, 1995. ,
Permeance Network Modeling of the Stator Winding Faults in Electrical Machines, IEEE Transactions on Magnetics, vol.45, issue.3, 2009. ,
DOI : 10.1109/TMAG.2009.2012780
Electromagnetic torque harmonics for on-line inter turn short circuits detection in squirrel cage induction motors, p.99, 1999. ,
¨ Contribution à l'alimentation en tension de machines synchrones à aimants permanents à nombre de phase élevé : fonctionnement normal et dégradé¨, Thèse de doctorat de l'INPL, 2003. ,
Design and Testing of a Four-Phase Fault-Tolerant Permanent-Magnet Machine for an Engine Fuel Pump, IEEE Transactions on Energy Conversion, vol.19, issue.4, 2006. ,
DOI : 10.1109/TEC.2004.832074
Internal Short Circuit Fault Diagnosis for PM Machines Using FE-Based Phase Variable Model and Wavelets Analysis, IEEE Transaction On Magnetics, vol.33, issue.4, 2007. ,
¨A 3-D finite element perturbation method for determining satured values of transformer winding inductances including experimental verification, IEEE Transaction On Magnetics, vol.21, issue.5, 1985. ,
Contribution à la modélisation et à l'estimation paramétrique des machines électriques à courant alternatif: Application au diagnostic, Thése de doctorat, 1999. ,
A novel method to detect rotor bars in squirrel cage induction motors when interbar currents are present, IEEE Power Engineering Society Meeting, vol.3, issue.4, 2003. ,
Detection of broken bars in induction motors using an extended Kalman filter for rotor resistance sensorless estimation, IEEE Transactions on Energy Conversion, vol.15, issue.1, pp.66-70, 2000. ,
DOI : 10.1109/60.849118
Condition monitoring and fault diagnosis of electrical machines ? a review, IEEE Industry Applications Conference.Thirty-Fourth IAS Annual Meeting, pp.197-204, 1999. ,
Short-circuit current reduction technique for surface mounted PM machines high torque-low speed applications, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004. ,
DOI : 10.1109/IAS.2004.1348609
Fault-Tolerant Interior-Permanent-Magnet Machines for Hybrid Electric Vehicle Applications, IEEE Transactions on Vehicular Technology, vol.56, issue.4, 2007. ,
DOI : 10.1109/TVT.2007.896978
¨ Optimization of the Magnetic Pole Shape of a Permanent-Magnet Synchronous Motor¨, IEEE Transactions, vol.43, issue.6s, pp.2531-2537, 2007. ,
Numerical magnetic field analysis and signal processing for fault diagnostics of electrical machines, Journal COMPEL, issue.4, p.22, 2003. ,
Détection et localisation de défaillances sur un entraînement électrique, Thèse de doctorat de l'Institut National Polytechnique de, 2000. ,
Synchronous machines parameters determination using finite element method, 2000. ,
Modelling and Detection of Inter-Turn Short Circuits in Stator Windings of Induction Motor, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, 2006. ,
DOI : 10.1109/IECON.2006.348093
URL : https://hal.archives-ouvertes.fr/hal-00084800
Fault-tolerant operation of single-phase SR generators, IEEE Transactions on Industry Applications, vol.35, issue.4, pp.774-781, 1999. ,
DOI : 10.1109/28.777184
Combined numerical and analytical method for geometry optimization of a PM motor, IEEE. Trans. Magnetics, vol.42, issue.4, 2006. ,
Fault tolerant multiphase electrical drives: the impact of design, The European Physical Journal Applied Physics, vol.43, issue.2, pp.159-163 ,
DOI : 10.1051/epjap:2008057
URL : https://hal.archives-ouvertes.fr/hal-00819009
Architectures d'Alimentation et de Commande d'Actionneurs Tolérants aux Défauts -Régulateur de Courant Non Linéaire à Large Bande Passante, Thèse de doctorat de l'INPL, 2007. ,
Recognition of rotor eccentricity of induction motor based on the fourier spectra of phase currents, Proc. ICEM'98, pp.408-413, 1998. ,
Meibody-tabar, ¨Study of Different Architectures of Fault Tolerant Actuator Using Double Star PM Motor¨, Proc. CDROM, Alberta Canada, 2008. ,
Transient model for induction machines with stator winding turn faults, IEEE Transaction on Industrial Applications, vol.38, issue.3, 2002. ,
A Survey of Methods for Detection of Stator-Related Faults in Induction Machines, IEEE Transactions on Industry Applications, vol.43, issue.4, pp.920-933, 2007. ,
DOI : 10.1109/TIA.2007.900448
Attenuation of magnetic field components through an AC machine stator, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol.27, issue.4, 2008. ,
DOI : 10.1108/03321640810878144
A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals, and oil refineries, IEEE Transactions on Industry Applications, vol.31, issue.5, pp.1186-1196, 1995. ,
DOI : 10.1109/28.464536
Transient analysis of cage induction machines under stator, rotor bar and end ring faults, IEEE Transactions on Energy Conversion, vol.10, issue.2, pp.241-247, 1995. ,
DOI : 10.1109/60.391888
¨A methodology for estimation of physical parameters¨, 16th IMACS, Applied mathematics and simulation, 2000. ,
¨ Transient modelling oriented to diagnostics of induction machines with rotor asymmetries¨, p.94, 1994. ,
Meibody-tabar, ¨Modelling of nonsalient PM synchronous Machines under stator winding inter-turn fault conditions: Dynamic model-Fem Modeï, 2007. ,
Modelling and FEM Validation of PM Synchronous Machines under Stator Winding inter-turn Fault, IEEE ELECTRIMACS, 2008. ,
Meibody-Tabar, ¨Modelling of IM with Stator Winding inter-turn Fault Validated by FEM¨, Proc. PD3-2, Portugal, 2008. ,
Experimentally Validated Dynamic Fault Model for PMSM with Stator Winding inter-turn Fault, IEEE IAS 2008 Annual meeting Proc. CDROM , Alberta Canada, 2008. ,
Fault Analysis and Parameter Identification of PM Motors by the Finite Element Method, IEEE Transactions on Magnetics, vol.45, issue.9, 2009. ,
Stator Turn Fault Study and Parameter Extraction of Induction Machines Using FEM, Journal COMPEL, 2009. ,
Determination of interbar current effects in the detection of broken rotor bars in squirrel cage induction motors, IEEE Transactions on Energy Conversion, vol.9, issue.1, pp.152-158, 1994. ,
DOI : 10.1109/60.282486
The use of finite element methods to improve techniques for the early detection of faults in 3-phase induction motors, IEEE Transactions on Energy Conversion, vol.14, issue.3, 1999. ,
DOI : 10.1109/60.790931
Study on Improving the Performance of Permanent Magnet Wheel Motor for the Electric Vehicle Application, IEEE Transactions on Magnetics, vol.43, issue.1, pp.438-442, 2008. ,
DOI : 10.1109/TMAG.2006.887705
A study of armature winding internal faults and protection schemes for turbogenerators, IEEE Industry Applications Conf, 2000. ,
Automatic determination of laminated salient-pole synchronous machines parameters based on the finite element method, Electrimacs, 1999. ,
Detection of broken bar or end-ring fault in asynchronous machines by spectrum analysis of the observed electromagnetic torque through supply cable, Revue Européenne de Diagnostic et Sûreté de Fonctionnement, 1995. ,
Programmable Design of Magnet Shape for Permanent-Magnet Synchronous Motors With Sinusoidal Back EMF Waveforms, Magnetics IEEE Transactions on, vol.44, issue.9s, pp.2163-2167, 2008. ,
Analytical Solution for Cogging Torque in Surface Permanent-Magnet Motors Using Conformal Mapping, IEEE Transactions on Magnetics, vol.44, issue.1, pp.52-65, 2006. ,
DOI : 10.1109/TMAG.2007.908652
A Fuzzy-Based Approach for the Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor Drive, IEEE Transactions on Industrial Electronics, vol.55, issue.2, pp.586-593, 2008. ,
DOI : 10.1109/TIE.2007.911951
URL : https://hal.archives-ouvertes.fr/hal-00524628
Analytical Methods for Minimizing Cogging Torque in Permanent-Magnet Machines, IEEE transactions on magnetics, vol.45, issue.4, pp.2023-2031, 2009. ,