M. Abouhamze and M. Shakeri, Multi-objective stacking sequence optimization of laminated cylindrical panels using a genetic algorithm and neural networks, Composite Structures, vol.81, issue.2, pp.253-263, 2007.
DOI : 10.1016/j.compstruct.2006.08.015

E. Acar, R. T. Haftka, and T. F. Johnson, Tradeoff of Uncertainty Reduction Mechanisms for Reducing Weight of Composite Laminates, Journal of Mechanical Design, vol.129, issue.3, pp.266-274, 2007.
DOI : 10.1115/1.2406097

S. Adali, M. Walker, and V. E. Verijenko, Multiobjective optimization of laminated plates for maximum prebuckling, buckling and postbuckling strength using continuous and discrete ply angles, Composite Structures, vol.35, issue.1, pp.117-130, 1996.
DOI : 10.1016/0263-8223(96)00030-X

S. Adali, V. E. Verijenko, and A. Richter, Minimum sensitivity design of laminated shells under axial load and external pressure, Composite Structures, vol.54, issue.2-3, pp.139-142, 2001.
DOI : 10.1016/S0263-8223(01)00081-2

S. Adali, F. Lene, G. Duvaut, and V. Chiaruttini, Optimization of laminated composites subject to uncertain buckling loads, Composite Structures, vol.62, issue.3-4, pp.261-269, 2003.
DOI : 10.1016/j.compstruct.2003.09.024

D. B. Adams, L. T. Watson, Z. Gürdal, and C. M. Anderson-cook, Genetic algorithm optimization and blending of composite laminates by locally reducing laminate thickness, Advances in Engineering Software 35, pp.35-43, 2004.
DOI : 10.1016/j.advengsoft.2003.09.001

D. B. Adams, Optimization Frameworks for Discrete Composite Laminates Stacking Sequences, 2005.

A. Brik and B. , Méthodologies de conception robuste et d'optimisation dans un contexte de conception d'architectures mécaniques nouvelles en avant projet, Thèse de Doctorat de l'Université de Franche-Comté, 2005.

A. Aktas and M. H. Dirikolu, An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates, Composites Science and Technology, vol.64, issue.10-11, pp.1605-1611, 2004.
DOI : 10.1016/j.compscitech.2003.11.005

O. Allix, P. Ladevèze, and E. Ledantec, Modélisation de l'endommagement du pli élémentaire des composites stratifiés, pp.443-453, 1990.

O. Allix, A composite damage meso-model for impact problems, Composites Science and Technology, vol.61, issue.15, pp.2193-2205, 2001.
DOI : 10.1016/S0266-3538(01)00113-0

O. Aluko and H. A. Whitworth, Analysis of Stress Distribution around Pin Loaded Holes in Orthotropic Plates, Composite Structures, 2008.

R. Andrews, J. Diederich, and A. B. Tickle, Survey and critique of techniques for extracting rules from trained artificial neural networks, Knowledge-Based Systems, vol.8, issue.6, pp.373-389, 1995.
DOI : 10.1016/0950-7051(96)81920-4

C. Antonio and C. A. , A hierarchical genetic algorithm for reliability based design of geometrically non-linear composite structures, Composite Structures, vol.54, issue.1, pp.37-47, 2001.
DOI : 10.1016/S0263-8223(01)00068-X

C. Antonio and L. N. Hoffbauer, From local to global importance measures of uncertainty propagation in composite structures, Composite Structures, vol.85, issue.3, pp.213-255, 2008.
DOI : 10.1016/j.compstruct.2007.10.012

H. Bae, R. V. Grandhi, and R. A. Canfield, An approximation approach for uncertainty quantification using evidence theory, Reliability Engineering & System Safety, vol.86, issue.3, pp.215-225, 2004.
DOI : 10.1016/j.ress.2004.01.011

V. Barichard, Approches hybrides pour les problèmes multiobjectifs, Thèse de Doctorat de l'Université d'Angers, 2003.

J. Barrau and S. Laroze, Calcul des structures en matériaux composites, 1987.

A. Berro, Optimisation multiobjectif et stratégies d'évolution en environnement dynamique, thèse de Doctorat de l'Université des Sciences Sociales de Toulouse, 2001.

J. Berthelot, Matériaux composites : comportement mécanique et analyse des structures, 1992.

H. S. Beyer and B. Sendhoff, Robust optimization ??? A comprehensive survey, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.33-34, pp.3190-3218, 2007.
DOI : 10.1016/j.cma.2007.03.003

A. Bouhamidi, L. Méhauté, and A. , Radial basis functions under tension, Journal of Approximation Theory, vol.127, issue.2, pp.135-154, 2004.
DOI : 10.1016/j.jat.2004.03.005
URL : http://doi.org/10.1016/j.jat.2004.03.005

J. Branke, T. Kaußler, and H. Schmeck, Guidance in evolutionary multi-objective optimization, Advances in Engineering Software 32, pp.499-507, 2001.
DOI : 10.1016/S0965-9978(00)00110-1

W. R. Broughton, L. E. Crocker, and M. R. Gower, Design requirements for Bonded and Bolted Composite Structures, NPL Report MATC, vol.65, 2002.

P. P. Camanho and F. L. Matthews, Stress analysis and strength prediction of mechanically fastened joints in FRP: a review, Composites Part A: Applied Science and Manufacturing, vol.28, issue.6, pp.529-547, 1997.
DOI : 10.1016/S1359-835X(97)00004-3

. Camanho, P. Camanho, and F. Matthews, Delamination Onset Prediction in Mechanically Fastened Joints in Composite Laminates, Journal of Composite Materials, vol.590, issue.10, pp.906-927, 1999.
DOI : 10.1177/002199839903301002

. Camanho, P. Camanho, and F. Matthews, A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates, Journal of Composite Materials, vol.24, issue.24, pp.2248-2280, 1999.
DOI : 10.1177/002199839903302402

P. P. Camanho and M. Lambert, A design methodology for mechanically fastened joints in laminated composite materials, Composites Science and Technology, vol.66, issue.15, pp.3004-3020, 2006.
DOI : 10.1016/j.compscitech.2006.02.017

A. Carpentier, J. Barrau, L. Michel, and S. Grihon, Thickness optimisation of composite panels, 9th SAMTECH Users Conference, 2005.

A. Carpentier, Optimisation multi-niveaux de panneaux composites, Thèse de Doctorat de l, 2008.

F. Chang, R. Scott, and G. Springer, Strength of Mechanically Fastened Composite Joints, Journal of Composite Materials, vol.13, issue.6, pp.470-94, 1982.
DOI : 10.1177/002199838201600603

F. Chang, S. R. Springer, and G. S. , Failure of Composite Laminates Containing Pin Loaded Holes--Method of Solution, Journal of Composite Materials, vol.18, issue.3, 1984.
DOI : 10.1177/002199838401800305

N. Chen and C. G. Soares, Reliability assessment for ultimate longitudinal strength of ship hulls in composite materials, Probabilistic Engineering Mechanics 22, pp.330-342, 2007.
DOI : 10.1016/j.probengmech.2007.05.001

M. Cho and S. Y. Rhee, Optimization of laminates with free edges under bounded uncertainty subject to extension, bending and twisting, International Journal of Solids and Structures, vol.41, issue.1, pp.227-245, 2004.
DOI : 10.1016/j.ijsolstr.2003.09.011

H. K. Cho and R. E. Rowlands, Reducing tensile stress concentration in perforated hybrid laminate by genetic algorithm, Composites Science and Technology, vol.67, issue.13, pp.2877-2883, 2007.
DOI : 10.1016/j.compscitech.2006.09.022

C. A. Coello, Theoretical and numerical constraint-handling techniques used with evolutionary algorithms: a survey of the state of the art, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.11-12, pp.1245-1287, 2002.
DOI : 10.1016/S0045-7825(01)00323-1

Y. Colette and P. Siarry, Optimisation Multiobjectif, Edition Eyrolles, 2002.

T. A. Collings, The strength of bolted joints in multi-directional cfrp laminates, Composites, vol.8, issue.1, p.1380, 1975.
DOI : 10.1016/0010-4361(77)90027-1

P. Conti, S. Luparello, and A. Pasta, Layer thickness optimisation in a laminated composite, Composites Part B: Engineering, vol.28, issue.3, pp.309-317, 1997.
DOI : 10.1016/S1359-8368(96)00048-0

C. O. Cramer, Load distribution in multiple bolt tension joints, Journal of the Structural Division, vol.94, issue.5, pp.1101-1117, 1968.

J. H. Crews and R. A. Naik, Bearing-bypass loading on bolted composite joints, NASA Technical Memorandum, vol.89153, 1987.

A. Crosky, D. Kelly, R. Li, X. Legrand, N. Huong et al., Improvement of bearing strength of laminated composites, Composite Structures 76, pp.260-271, 2006.
DOI : 10.1016/j.compstruct.2006.06.036

M. Dano, G. Gendron, and A. Picard, Stress and failure analysis of mechanically fastened joints in composite laminates, Composite Structures, vol.50, issue.3, pp.287-296, 2000.
DOI : 10.1016/S0263-8223(00)00119-7

A. R. De-faria, Buckling optimization and antioptimization of composite plates: uncertain loading combinations, International Journal for Numerical Methods in Engineering, vol.66, issue.3, pp.719-732, 2001.
DOI : 10.1002/nme.309

A. R. De-faria and S. F. De-almeida, Buckling optimization of plates with variable thickness subjected to nonuniform uncertain loads, International Journal of Solids and Structures, vol.40, issue.15, pp.3955-3966, 2003.
DOI : 10.1016/S0020-7683(03)00177-X

A. M. Gonçalves-de-lima, Modélisation et optimisation robuste de l'amortissement viscoélastique de systèmes mécaniques, Thèse de, 2007.

J. J. De-rijck, Stress Analysis of Fatigue Cracks in Mechanically Fastened Joints, Thèse de Doctorat de l'université de Delft, 2005.

K. Deb, A. Pratap, S. Agrawal, T. K. Meyarivan, A. Pratap et al., A fast and elitist multiobjective genetic algorithm: NSGA-II Kanpur: Indian Institute of Technology KanpurA fast and elitist multiobjective genetic algorithm: NSGA-II, 2000.

K. Deb and H. Gupta, Introducing robustness in multiobjective optimization, KanGAL Report No, 2004.

K. Deb and H. Gupta, A constraint handling strategy for robust multi-criterion optimization, KanGAL Report No, 2005.

C. G. Diaconu, M. Sato, and H. Sekin, Feasible region in general design space of lamination parameters for laminated composites, AIAA Journal, vol.40, issue.3, 2002.
DOI : 10.2514/3.15097

C. G. Diaconu, M. Sato, and H. Sekine, Buckling characteristics and layup optimization of long laminated composite cylindrical shells subjected to combined loads using lamination parameters, Composite Structures, vol.58, issue.4, pp.423-433, 2002.
DOI : 10.1016/S0263-8223(02)00130-7

C. G. Diaconu, M. Sato, and H. Sekin, Feasible region in general design space of lamination parameters for laminated composites, AIAA Journal, vol.40, issue.3, 2002.
DOI : 10.2514/3.15097

C. G. Diaconu and H. Sekine, Layup Optimization for Buckling of Laminated Composite Shells with Restricted Layer Angles, AIAA Journal, vol.42, issue.10, pp.2153-2163, 2004.
DOI : 10.2514/1.931

C. G. Diaconu and P. M. Weaver, Approximate Solution and Optimum Design of Compession-Loaded, Postbuckled Laminated Composite Plates, AIAA Journal, vol.43, issue.4

C. G. Diaconu and P. M. Weaver, Approximate Solution and Optimum Design of Compression-Loaded, Postbuckled Laminated Composite Plates., AIAA Journal, vol.43, issue.4, pp.906-914, 2005.
DOI : 10.2514/1.10827

J. Dréo, A. Pétrowski, P. Siarry, and E. Taillard, Métaheuristiques pour l'optimisation difficile, 2003.

M. Ehrgott, Multicriteria Optimization, 2000.
DOI : 10.1007/978-3-662-22199-0

M. Ehrgott and X. Gandibleux, A survey and annotated bibliography of multiobjective combinatorial optimization, OR Spectrum, vol.22, issue.4, pp.425-460, 2000.
DOI : 10.1007/s002910000046
URL : https://hal.archives-ouvertes.fr/hal-00462047

J. Ekh and J. Schön, Load transfer in multirow, single shear, composite-to-aluminium lap joints, Composites Science and Technology, vol.66, issue.7-8, pp.875-885, 2006.
DOI : 10.1016/j.compscitech.2005.08.015

J. Ekh and J. Schön, Finite element modeling and optimization of load transfer in multi-fastener joints using structural elements, Composite Structures, vol.82, issue.2, pp.245-256, 2008.
DOI : 10.1016/j.compstruct.2007.01.005

O. Erdal and F. O. Sonmez, Optimum design of composite laminates for maximum buckling load capacity using simulated annealing, Composite Structures 71, pp.45-52, 2005.
DOI : 10.1016/j.compstruct.2004.09.008

B. G. Falzon, K. A. Stevens, and G. O. Davies, Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compression, Composites Part A: Applied Science and Manufacturing, vol.31, issue.5, pp.31-459, 2000.
DOI : 10.1016/S1359-835X(99)00085-8

G. S. Fishman, Monte Carlo: concepts, algorithms, and applications, 1995.
DOI : 10.1007/978-1-4757-2553-7

D. M. Frangopol and K. Maute, Life-cycle reliability-based optimization of civil and aerospace structures, Computers & Structures, vol.81, issue.7, pp.397-410, 2003.
DOI : 10.1016/S0045-7949(03)00020-8

. Frangopol, D. M. Frangopol, and S. Recek, Reliability of fiber-reinforced composite laminate plates, Probabilistic Engineering Mechanics 18, pp.119-137, 2003.
DOI : 10.1016/S0266-8920(02)00054-1

K. Fukuda, Polyhedral computation FAQ, 1991.

M. Gendreau, An Introduction to Tabu Search, pp.37-54
DOI : 10.1007/0-306-48056-5_2

F. Glover, Future paths for integer programming and links to artificial intelligence, Computers & Operations Research, vol.13, issue.5, pp.533-549, 1986.
DOI : 10.1016/0305-0548(86)90048-1

F. Glover and G. A. Kochenberger, Handbook of Metaheuristics, 2003.
DOI : 10.1007/b101874

G. Gohorianu, Interaction entre les défauts d'usinage et la tenue en matage d'assemblages boulonnés en carbone / époxy, 2008.

D. E. Goldberg, Genetic algorithms for search, optimization, and machine learning, 1989.

J. H. Gosse and S. Christensen, Strain invariant failure criteria for polymers in composite materials, 19th AIAA Applied Aerodynamics Conference, pp.1-25005, 2001.
DOI : 10.2514/6.2001-1184

J. L. Grenestedt and P. Gudmundson, Layup Optimization of Composite Material Structures, Optimal Design with Advanced Materials, pp.311-336, 1993.
DOI : 10.1016/B978-0-444-89869-2.50027-5

L. Grosset, R. Le-riche, and R. T. Haftka, A Two-Tier Estimation of Distribution Algorithm for Composite Laminate Optimization, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 2004.
DOI : 10.2514/6.2004-4529
URL : https://hal.archives-ouvertes.fr/emse-00686981

L. Guillaumat, F. Baudou, A. Gomes-de-azevedo, and J. Lataillade, Contribution of the experimental designs for a probabilistic dimensioning of impacted composites, International Journal of Impact Engineering, vol.31, issue.6, pp.629-641, 2005.
DOI : 10.1016/j.ijimpeng.2004.02.009

P. Hajela and C. Lin, Genetic search strategies in multicriterion optimal design, Structural Optimization, vol.28, issue.2, pp.99-107, 1992.
DOI : 10.1007/BF01759923

P. Hansen and N. Mladenovic, Variable Neighborhood Search
DOI : 10.1007/978-0-387-74759-0_694
URL : https://hal.archives-ouvertes.fr/hal-00979295

H. Hart-smith and L. J. , Bolted Joints in Graphite Epoxy Composites, p.144899, 1976.

Z. Hashin and A. Rotem, A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, vol.7, issue.4, pp.448-464, 1973.
DOI : 10.1177/002199837300700404

F. Hassani, M. Shokrieh, and L. Lessard, A fully non-linear 3-D constitutive relationship for the stress analysis of a pin-loaded composite laminate, Composites Science and Technology, vol.62, issue.3, pp.429-439, 2002.
DOI : 10.1016/S0266-3538(02)00003-9

J. E. Herencia, P. M. Weaver, and M. I. Friswell, Optimisation of Long Anisotropic Laminated Fiber Composite Panels with T-Shaped Stiffeners, AIAA Journal, vol.45, issue.10, 2007.

R. Hinterding and Z. Michalewicz, Your brains and my beauty: parent matching for constrained optimisation, 1998 IEEE International Conference on Evolutionary Computation Proceedings. IEEE World Congress on Computational Intelligence (Cat. No.98TH8360), pp.810-815, 1998.
DOI : 10.1109/ICEC.1998.700156

J. N. Hooker, Testing heuristics: We have it all wrong, Journal of Heuristics, vol.6, issue.1, pp.33-42, 1995.
DOI : 10.1007/BF02430364

J. Huang, S. Venkataraman, A. J. Rapoff, and R. T. Haftka, Optimization of axisymmetric elastic modulus distributions around a hole for increased strength, Structural and Multidisciplinary Optimization 25, pp.225-236, 2003.
DOI : 10.1007/s00158-003-0293-8

C. Huchette, Sur la complémentarité des approches expérimentales et numériques pour la modélisation des mécanismes d'endommagement des composites stratifiés, Thèse de Doctorat de l, 2005.

B. Husslage, Maximin Designs for Computer Experiments, 2006.

H. Huth, The influence of fastener flexibility on load transfer and fatigue life predictions for multi-row bolted and riveted joints, 1984.

M. Hyer and E. Klang, Contact stresses in pin-loaded orthotropic plates, International Journal of Solids and Structures, vol.21, issue.9, pp.957-975, 1985.
DOI : 10.1016/0020-7683(85)90110-6

E. Iarve, Three-dimensional stress analysis in liminated composites with fasteners based on the B-spline approximation, Composites: Part A, pp.559-571, 1997.

F. Irisarri, Simulation du comportement et des dégradations des assemblages boulonnés dans les structures composites, 2005.

F. Irisarri and N. Carrère, Cas-test EADS/CCR : étude d'une jonction boulonnée complexe, 2007.

H. K. Jeong and R. A. Shenoi, Probabilistic strength analysis of rectangular FRP plates using Monte Carlo simulation, Computers and Structures 76, pp.219-235, 2000.
DOI : 10.1016/S0045-7949(99)00171-6

Y. Jin and J. Branke, Evolutionary Optimization in Uncertain Environments???A Survey, IEEE Transactions on Evolutionary Computation, vol.9, issue.3, 2005.
DOI : 10.1109/TEVC.2005.846356

I. Jolliffe, Principal Component Analysis, 1986.
DOI : 10.1007/978-1-4757-1904-8

R. M. Jones, Mechanics of Composite Materials, Journal of Applied Mechanics, vol.42, issue.3, 1975.
DOI : 10.1115/1.3423688

J. Kang and C. Kim, Minimum-weight design of compressively loaded composite plates and stiffened panels for postbuckling strength by Genetic Algorithm, Composite Structures 69, pp.239-246, 2005.
DOI : 10.1016/j.compstruct.2004.07.001

C. Kassapoglou, Composite plates with two concentric layups under compression, Composites Part A: Applied Science and Manufacturing, vol.39, issue.1, pp.104-112, 2008.
DOI : 10.1016/j.compositesa.2007.08.024

R. Kathivarian and R. Ganguli, Strength design of composite beam using gradient and particle swarm optimization, Composite Structures, vol.81, pp.471-479, 2007.

G. Kelly and S. Hallström, Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearance, Composites Part B: Engineering, vol.35, issue.4, pp.331-343, 2004.
DOI : 10.1016/j.compositesb.2003.11.001

P. Kere, M. Lyly, and J. Koski, Using multicriterion optimization for strength design of composite laminates, Composite Structures, vol.62, issue.3-4, pp.329-333, 2003.
DOI : 10.1016/j.compstruct.2003.09.032

S. J. Kim, J. S. Hwang, and K. J. , Progressive Failure Analysis of Pin-Loaded Laminated Composites Using Penalty Finite Element Method, AIAA Journal, vol.36, issue.1, pp.75-80, 1998.
DOI : 10.2514/2.354

T. Kim and H. Sin, Optimal design of composite laminated plates with the discreteness in ply angles and uncertainty in material properties considered, Computers & Structures, vol.79, issue.29-30, pp.2501-2509, 2001.
DOI : 10.1016/S0045-7949(01)00133-X

S. Kirkpatrick, C. Gelatt, and M. Vecchi, Optimization by Simulated Annealing, Science, vol.220, issue.4598, pp.671-680, 1983.
DOI : 10.1126/science.220.4598.671

V. Kradinov, A. Barut, E. Madenci, and D. R. Ambur, Bolted double-lap composite joints under mechanical and thermal loading, International Journal of Solids and Structures, vol.38, issue.44-45, pp.57-75, 2001.
DOI : 10.1016/S0020-7683(01)00128-7

V. Kradinov, E. Madenci, and D. R. Ambur, Bolted lap joints of laminates with varying thickness and metallic inserts, Composite Structures, vol.68, issue.1, pp.75-85, 2005.
DOI : 10.1016/j.compstruct.2004.03.002

V. Kradinov, E. Madenci, and D. R. Ambur, Combined in-plane and through-the-thickness analysis for failure prediction of bolted composite joints, Composite Structures, vol.77, issue.2, pp.127-147, 2007.
DOI : 10.1016/j.compstruct.2005.06.008

V. Kradinov, E. Madenci, and D. R. Ambur, Application of genetic algorithm for optimum design of bolted composite lap joints, Composite Structures, vol.77, issue.2, pp.148-159, 2007.
DOI : 10.1016/j.compstruct.2005.06.009

J. Kweon, H. Ahn, and J. Choi, A new method to determine the characteristic lengths of composite joints without testing, Composite Structures, vol.66, issue.1-4, pp.305-315, 2004.
DOI : 10.1016/j.compstruct.2004.04.053

P. Ladevèze, Sur la mécanique de l'endommagement des composites, Comptes rendus des JNC5, Pluralis, pp.667-683, 1986.

P. Ladevèze, Constitutive relation error estimators for time-dependent non-linear FE analysis, Computer Methods in Applied Mechanics and Engineering, vol.188, issue.4, pp.775-788, 2000.
DOI : 10.1016/S0045-7825(99)00361-8

L. Lamberti, S. Venkataraman, R. T. Haftka, and T. F. Johnson, Preliminary design optimization of stiffened panels using approximate analysis models, International Journal for Numerical Methods in Engineering, vol.39, issue.10, pp.1351-1380, 2003.
DOI : 10.1002/nme.781

L. Lanzi and V. Giavotto, Post-buckling optimization of composite stiffened panels: Computations and experiments, Composite Structures, vol.73, issue.2, pp.208-220, 2006.
DOI : 10.1016/j.compstruct.2005.11.047

M. Laumanns, Analysis and Applications of Evolutionary Multiobjective Optimization Algorithms, 2003.

F. Laurin, Approche multiéchelle des mécanismes de ruine progressive des matériaux stratifies et analyse de la tenue de structures composites, Thèse de Doctorat de l'Université de Franche-Comté, 2005.

F. Laurin, N. Carrere, and J. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites Part A: Applied Science and Manufacturing, vol.38, issue.1, pp.198-209, 2007.
DOI : 10.1016/j.compositesa.2006.01.018

V. P. Lawlor, S. W. Mccarthy, and M. A. , Characterisation of damage development in single shear bolted composite joints, Thèse de Doctorat de l, pp.126-133, 1989.
DOI : 10.1520/CTR10491J

L. Riche, R. Knopf-lenoir, C. Haftka, and R. T. , A Segregated Genetic Algorithm for Constrained Structural Optimization, Proceedings of the 6th International Conference on Genetic Algorithms, pp.558-565, 1995.

L. Riche, R. Gaudin, and J. , Design of dimensionally stable composites by evolutionary optimization, Composite Structures 41, pp.97-111, 1998.
DOI : 10.1016/S0263-8223(98)00009-9
URL : https://hal.archives-ouvertes.fr/emse-00759406

L. Riche, R. Schoenauer, M. Sebag, and M. , Un état des lieux de l'optimisation évolutionnaire et de ses implications en sciences pour l'ingénieur", dans "Modélisation numérique : défis et perspectives, 2 nd volume, Hermès, pp.187-259, 2007.

D. S. Lee, L. F. Gonzalez, J. Periaux, and K. Srinivas, Robust design optimisation using multiobjective evolutionary algorithms, Computers and Fluids, 2007.

A. C. Lemonge and H. J. Barbosa, An adaptive penalty scheme for genetic algorithms in structural optimization, International Journal for Numerical Methods in Engineering, vol.59, issue.5, pp.703-736, 2004.
DOI : 10.1002/nme.899

F. H. Leroy, N. Gueit, and Y. Rollet, Qualification et expérimentations virtuelles : Consolidation des bases de données, 2006.

F. Leroy, N. Gueit, and Y. Rollet, Apports du virtual testing et des outils statistiques avancés dans l'estimation des valeurs admissibles de dimensionnement, 2007.

L. B. Lessard and M. M. Shokrieh, Two-Dimensional Modeling of Composite Pinned-Joint Failure, Journal of Composite Materials, vol.29, issue.5, pp.671-697, 1995.
DOI : 10.1177/002199839502900507

C. Liang and H. Chen, Optimum design of fiber-reinforced composite cylindrical skirts for solid rocket cases subjected to buckling and overstressing constraints, Composites Part B: Engineering, vol.34, issue.3, pp.273-284, 2003.
DOI : 10.1016/S1359-8368(02)00104-X

C. Liang, H. Chen, and C. Jen, Optimum design of filament-wound multilayer-sandwich submersible pressure hulls, Ocean Engineering, vol.30, issue.15, pp.1941-1967, 2003.
DOI : 10.1016/S0029-8018(03)00044-1

C. Lin, C. Lin, and J. T. Wang, On some aspects of pin-loaded laminates, International Journal of Solids and Structures, vol.37, issue.4, pp.599-65, 2000.
DOI : 10.1016/S0020-7683(99)00025-6

B. Liu, Two-level optimization of composite wing structures based on panel genetic optimization, 2001.

W. Liu, R. Butler, A. R. Mileham, and A. J. Green, Bilevel Optimization and Postbuckling of Highly Strained Composite Stiffened Panels, AIAA Journal, vol.44, issue.11, pp.2562-2570, 2006.
DOI : 10.2514/1.22206

M. Lombardi and R. T. Haftka, Anti-optimization technique for structural design under load uncertainties, Computational Methods in Applied Mechanics and engineering 157, pp.19-31, 1998.
DOI : 10.1016/S0045-7825(97)00148-5

D. Louis, Simulation des endommagements dans les plaques composites trouées, 2001.

J. Mackerle, Finite element analysis of fastening and joining: A bibliography (1990???2002), International Journal of Pressure Vessels and Piping, vol.80, issue.4, pp.253-271, 1990.
DOI : 10.1016/S0308-0161(03)00030-9

J. Maire, Etudes théoriques et expérimentales du comportement des matériaux composites en contraintes planes, Thèse de Doctorat de l'Université de Franche-Comté, 1992.

F. Maire, Rule-extraction by backpropagation of polyhedra, Neural Networks, vol.12, issue.4-5, pp.4-5, 1999.
DOI : 10.1016/S0893-6080(99)00013-1

R. Matsuzaki and A. Todoroki, Stacking-sequence optimization using fractal branch-and-bound method for unsymmetrical laminates, Composite Structures, vol.78, issue.4, pp.537-550, 2007.
DOI : 10.1016/j.compstruct.2005.11.015

J. S. Mayes and A. C. Hansen, Composite laminate failure analysis using multicontinuum theory, Composites Science and Technology, vol.64, issue.3-4, pp.379-394, 2004.
DOI : 10.1016/S0266-3538(03)00219-7

M. A. Mccarthy, V. P. Lawlor, W. F. Stanley, and C. T. Mccarthy, Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints, Composites Science and Technology, vol.62, issue.10-11, pp.1415-1431, 2002.
DOI : 10.1016/S0266-3538(02)00088-X

M. A. Mccarthy, V. P. Lawlor, W. F. Stanley, and C. T. Mccarthy, Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints, Composites Science and Technology, vol.62, issue.10-11, pp.1415-1431, 2002.
DOI : 10.1016/S0266-3538(02)00088-X

C. T. Mccarthy, M. A. Mccarthy, W. F. Stanley, and V. P. Lawlor, Experiences with Modeling Friction in Composite Bolted Joints, Journal of Composite Materials, vol.39, issue.21, pp.1881-1908, 2005.
DOI : 10.1177/0021998305051805

M. A. Mccarthy, C. T. Mccarthy, V. P. Lawlor, and W. F. Stanley, Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I???model development and validation, Composite Structures 71, pp.140-158, 2005.
DOI : 10.1016/j.compstruct.2004.09.024

C. T. Mccarthy and M. A. Mccarthy, Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part II??????effects of bolt-hole clearance, Composite Structures 71, pp.159-175, 2005.
DOI : 10.1016/j.compstruct.2004.09.023

C. T. Mccarthy, M. A. Mccarthy, and V. P. Lawlor, Progressive damage analysis of multi-bolt composite joints with variable bolt???hole clearances, Composites Part B: Engineering, vol.36, issue.4, pp.290-305, 2005.
DOI : 10.1016/j.compositesb.2004.11.003

M. A. Mccarthy, C. T. Mccarthy, and G. S. Padhi, A simple method for detrmining the effects of bolt-hole clerance on load distribution in single-column mulit-bolt composite joints, Composite Structures 73, pp.78-87, 2006.

F. Meraghni, F. Desrumaux, and M. L. Benzeggagh, Implementation of a constitutive micromechanical model for damage analysis in glass mat reinforced composite structures, Composites Science and Technology, vol.62, issue.16, pp.2087-2097, 2002.
DOI : 10.1016/S0266-3538(02)00110-0

A. Merval, M. Samuelides, and S. Grihon, Application of Response Surface Methodology to Stiffened Panel Optimization, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference<BR> 14th AIAA/ASME/AHS Adaptive Structures Conference<BR> 7th, 2006.
DOI : 10.2514/6.2006-1815

Z. Michalewicz, A survey of constraint handling techniques in evolutionary computation methods, Proceedings of the 4th Annual Conference on Evolutionary Programming, pp.135-155, 1995.

Z. Michalewicz, D. Dasgupta, R. G. Le-riche, and M. Schoenauer, Evolutionary algorithms for constrained engineering problems, Computers & Industrial Engineering, vol.30, issue.4, pp.851-870, 1996.
DOI : 10.1016/0360-8352(96)00037-X

Z. Michalewicz and D. B. Fogel, How to solve it: Modern Heuristics, 2004.
DOI : 10.1007/978-3-662-04131-4

M. Miki, Material design of composite laminates with required in-plane elastic properties, Progress in Science and Engineering of Composites, ICCM-IV, pp.1725-1731, 1982.

M. Miki, Y. Murotsu, T. Tanaka, and S. Shao, Reliability-based optimization of fibrous laminated composites, Reliability Engineering and System Safety 56, pp.285-290, 1997.
DOI : 10.1016/S0951-8320(95)00090-9

. Mil-hdbk-, 17-3F] Military handbook MIL-HDBK-17-3FPolymer matrix composites, materials usage, design and analysis, 2002.

A. K. Munjal and R. K. Wilks, Optimization of pin bearing joint strength for segmented graphite/epoxy filament wound case in space shuttle, 1984.

S. Nagendra, D. Jestin, Z. Gürdal, R. T. Haftka, and L. T. Watson, Improved genetic algorithm for the design of stiffened composite panels, Computers & Structures, vol.58, issue.3, pp.543-555, 1996.
DOI : 10.1016/0045-7949(95)00160-I

M. P. Nemeth, Buckling behavior of long anisotropic plates subjected to combined loads, 36th Structures, Structural Dynamics and Materials Conference, 1995.
DOI : 10.2514/6.1995-1455

M. C. Niu, Composite Airframe Structures: Practical Design Information and Data, p.440, 1992.

A. K. Noor, L. V. Veneri, D. B. Paul, and M. A. Hopkins, Structures technology for future aerospace systems, Computers and structures 74, pp.507-519, 2000.

A. K. Noor, . J. Starnes-jr, and J. M. Peters, Uncertainty analysis of stiffened composite panels, Composite Structures 51, pp.139-158, 2001.
DOI : 10.1016/S0263-8223(00)00143-4

W. L. Oberkampf, S. M. Deland, B. M. Rutherford, K. V. Diegert, and K. F. Alvin, Error and uncertainty in modeling and simulation, Reliability Engineering & System Safety, vol.75, issue.3, pp.333-357, 2002.
DOI : 10.1016/S0951-8320(01)00120-X

B. Okutan and R. Karakuzu, The strength of pinned joints in laminated composites, Composites Science and Technology, vol.63, issue.6, pp.893-905, 2003.
DOI : 10.1016/S0266-3538(02)00313-5

I. Othmani, Optimisation multicritère : fondements et concepts, Thèse de Doctorat de l, 1998.

J. H. Park, J. H. Hwang, C. S. Lee, W. Hwang, H. Park et al., Stacking sequence design of composite laminates for maximum strength using genetic algorithmsBearing failure analysis of mechanically fastened joints in composite laminatesEffects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates, Composite Structures 52 Composite Structures 53, pp.217-231, 2001.

E. Paroissien, Contribution aux assemblages hybrides (boulonnés/collés) -Application aux jonctions aéronautiques, Thèse de Doctorat de l, 2006.

A. Parvizi, K. W. Garrett, and J. E. Bailey, Constrained cracking in glass fibre-reinforced epoxy cross-ply laminates, Journal of Materials Science, vol.8, issue.1, pp.195-201, 1978.
DOI : 10.1007/BF00739291

J. L. Pelletier and S. V. Vel, Multi-objective optimization of fiber reinforced composite laminates for strength, stiffness and minimal mass, Computers & Structures, vol.84, issue.29-30, pp.2065-2080, 2006.
DOI : 10.1016/j.compstruc.2006.06.001

D. Perreux, Prévisions de la durée de vie de matériaux composites verre-époxy unidirectionnels stratifiés et tissés en contraintes complexes, Thèse de Doctorat, 1989.

M. Sefrioui, J. Periaux, and B. Mantel, RCS multi-objective optimization of scattered waves by active control elements using GA, Fourth International Conference on Control, Automation, Robotics and Vision, 1996.

E. Persson, E. Madenci, and I. Eriksson, Delamination initiation of laminates with pin-loaded holes, Theoretical and Applied Fracture Machanics 30, pp.87-101, 1998.
DOI : 10.1016/S0167-8442(98)00046-9

P. Perugini, A. Riccio, and F. Scaramuzzino, Three-dimensional progressive damage analysis of composite joints, Proceedings of the Eighth International Conference on Civil and Structural Engineering Computing, 2001.

C. Petipas, Analyse et prévision du comportement à long terme des composites fibres de carbone / matrice organique, Thèse de Doctorat de l'Université de Franche-Comté, 2000.

S. T. Pinho, C. G. Davila, P. P. Camanho, L. Iannucci, and P. Robinson, Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear nonlinearityFailure analysis of FRP laminates by means of physically based phenomenological models, Composites Science and Tachnology, vol.58, pp.1045-1067, 1998.

X. Qu, S. Venkataraman, R. T. Haftka, and T. F. Johnson, Response surface options for reliability-based optimization of composite laminates, 2000.

X. Qu, S. Venkataraman, R. T. Haftka, and T. F. Johnson, Deterministic and Reliability-Based Optimization of Composite Laminates for Cryogenic Environments, AIAA Journal, vol.41, issue.10, pp.2029-2036, 2003.
DOI : 10.2514/2.1893

X. Qu and R. T. Haftka, Reliability-based design optimization using probabilistic sufficiency factor, Structural and Multidisciplinary Optimization, vol.27, issue.5, pp.314-325, 2004.
DOI : 10.1007/s00158-004-0390-3

S. G. Rahul, D. Chakraborty, and A. Dutta, Multi-objective optimization of hybrid laminates subjected to transverse impact, Composite Structures, vol.73, issue.3, pp.360-369, 2006.
DOI : 10.1016/j.compstruct.2005.02.008

A. Rama-05-]-rama-mohan-rao and N. Arvind, A scatter search algorithm for stacking sequence optimisation of laminate composites, Composite Structures, vol.70, issue.4, pp.383-402, 2005.
DOI : 10.1016/j.compstruct.2004.09.031

A. Rama-mohan-rao and N. Arvind, A scatter search algorithm for stacking sequence optimisation of laminate composites, Composite Structures, vol.70, issue.4, pp.383-402, 2005.
DOI : 10.1016/j.compstruct.2004.09.031

A. Riccio and F. Scaramuzzino, Influence of damage onset and propagation on the tensile structural behaviour of protruding composite joints, 4th GRACM Congress on Computational Mechanics, 2002.

B. Roeseler, B. Sarh, and M. Kismarton, Composite Structures: The First 100Years, 2007.

Y. Rollet, Vers une maîtrise des incertitudes en calculs des structures composites, Thèse de Doctorat de l'Ecole Polytechnique, 2007.

R. D. Ross, An electrical computer for the solution of shear-lag bolted joint problems, 1947.

J. D. Schaffer, Multiple Objective Optimization with Vector Evaluated Genetic Algorithms, Proceedings of the 1 st International Conference on Genetic Algorithms, pp.93-100, 1985.

A. Schieffer, J. Maire, and D. Lévêque, Analyse couplée du comportement mécanique et du vieillissement de composites à matrice organique, 2000.

J. Schön, Coefficient of friction for aluminum in contact with a carbon fiber epoxy composite, Tribology International, vol.37, issue.5, pp.395-404, 2004.
DOI : 10.1016/j.triboint.2003.11.008

J. Schön, Coefficient of friction and wear of a carbon fiber epoxy matrix composite, Wear, vol.257, issue.3-4, pp.395-407, 2004.
DOI : 10.1016/j.wear.2004.01.008

O. Seresta, Z. Gürdal, D. B. Adams, and L. T. Watson, Optimal design of composite wing structures with blended laminates, Composites Part B: Engineering, vol.38, issue.4, pp.469-480, 2007.
DOI : 10.1016/j.compositesb.2006.08.005

B. N. Singh, D. Yadav, and N. G. Iyengar, Stability analysis of laminated cylindrical panels with uncertain material properties, Composite Structures, vol.54, issue.1, pp.17-26, 2001.
DOI : 10.1016/S0263-8223(01)00065-4

G. Soremekun, Z. Gürdal, R. T. Haftka, and L. T. Watson, Composite laminate design optimization by genetic algorithm with generalized elitist selection, Computers & Structures, vol.79, issue.2, pp.131-143, 2001.
DOI : 10.1016/S0045-7949(00)00125-5

R. Spallino and S. Rizzo, Multi-objective discrete optimization of laminated structures, Mechanics Research Communications, vol.29, issue.1, pp.17-25, 2005.
DOI : 10.1016/S0093-6413(02)00227-6

N. Srinivas and K. Deb, Muiltiobjective Optimization Using Nondominated Sorting in Genetic Algorithms, Evolutionary Computation, vol.27, issue.3, pp.221-248, 1994.
DOI : 10.1162/evco.1994.2.3.221

A. Suffis, T. A. Lubrecht, and A. Combescure, Damage model with delay effect, International Journal of Solids and Structures, vol.40, issue.13-14, pp.3463-3476, 2003.
DOI : 10.1016/S0020-7683(03)00153-7
URL : https://hal.archives-ouvertes.fr/hal-00454712

S. Suresh, P. B. Sujit, and A. K. Rao, Particle swarm optimization approach for multi-objective composite box-beam design, Composite Structures, vol.81, issue.4, pp.598-605, 2005.
DOI : 10.1016/j.compstruct.2006.10.008

T. Swift, Development of the fail-safe design features of the DC-10, Damage Tolerance in Aircraft, Structures, ASTM STP 486, American Society for Testing and Materials, pp.164-214, 1971.

E. Talbi, A Taxonomy of Hybrid Metaheuristics, Journal of Heuristics, vol.8, issue.5, pp.541-564, 2002.
DOI : 10.1023/A:1016540724870

M. B. Tate and S. J. Rosenfeld, Preliminary Investigation of the loads carried by individual bolts in Bolted, 1946.

T. E. Tay, V. B. Tan, and S. H. Tan, Element-Failure: An Alternative to Material Property Degradation Method for Progressive Damage in Composite Structures, Journal of Composite Materials, vol.40, issue.3, pp.1659-1675, 2005.
DOI : 10.1177/0021998305051113

A. Todoroki and R. T. Haftka, Stacking sequence optimization by a genetic algorithm with a new recessive gene like repair strategy, Composites Part B: Engineering, vol.29, issue.3, pp.277-285, 1998.
DOI : 10.1016/S1359-8368(97)00030-9

A. Todoroki and . Sasai-m, Improvement of Design Reliability for Buckling Load Maximization of Composite Cylinder Using Genetic Algorithm with Recessive-Gene-Like Repair, JSME International Journal, Series A 42, vol.4, pp.530-536, 1999.

A. Todoroki and T. Ishikawa, Design of experiments for stacking sequence optimizations with genetic algorithm using response surface approximation, Composite Structures, vol.64, issue.3-4, pp.349-357, 2004.
DOI : 10.1016/j.compstruct.2003.09.004

A. Todoroki and M. Sekishiro, New iteration fractal branch and bound method for stacking sequence optimizations of multiple laminates, Composite Structures, vol.81, issue.3, pp.419-426, 2007.
DOI : 10.1016/j.compstruct.2006.09.001

S. W. Tsai and N. J. Pagano, Invariant properties of composite materials, Composite Materials Workshop, pp.233-253, 1968.

S. W. Tsai and T. Et-hahn, Introduction of composite materials, 1980.

V. Tvergaard, Effect of fibre debonding in a whisker-reinforced metal, Materials Science and Engineering: A, vol.125, issue.2, pp.203-213, 1990.
DOI : 10.1016/0921-5093(90)90170-8

E. Valot and P. Vannucci, Some exact solutions for fully orthotropic laminates, Composite Structures, vol.69, issue.2, pp.1557-166, 2005.
DOI : 10.1016/j.compstruct.2004.06.007
URL : https://hal.archives-ouvertes.fr/hal-01382874

D. A. Van-veldhuizen, . Afit-/-ds-/, and . Eng, Multiobjective Evolutionary Algorithms: Classifications, Analyses, and New Innovations, pp.99-100, 1999.

V. Vinckenroy, G. De-wilde, and W. P. , The use of Monte Carlo techniques in statistical finite element methods for the determination of the structural behaviour of composite materials structural components, Composite Structures, vol.32, issue.1-4, pp.247-253, 1995.
DOI : 10.1016/0263-8223(95)00055-0

P. Vannucci and A. Vincenti, The design of laminates with given thermal/hygral expansion coefficients: A general approach based upon the polar-genetic method, Composite Structures 79, pp.454-466, 2007.
DOI : 10.1016/j.compstruct.2006.02.004

S. Venkataraman and R. T. Haftka, Optimization of Composite Panels -a review, Proceedings of the American Society of Composites-14th Annual Technical Conference, pp.479-488, 1999.

S. Venkataraman, R. T. Haftka, and T. F. Johnson, Maximal Errors due to Use of Equivalent Properties for Sublaminates, AIAA Journal, vol.39, issue.2, 2001.

S. Venkataraman, R. T. Haftka, and A. Structures, Structural Optimization: What has Moore's Law Done for Us?, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, pp.22-25, 2002.
DOI : 10.2514/6.2002-1342

S. Venkataraman, R. T. Haftka, and A. J. Rapoff, Structural optimization using biological variables to help understand how bones design holes, Structural and multidisciplinary optimization 25, pp.19-34, 2003.
DOI : 10.1007/s00158-002-0268-1

G. Verchery, Les invariants des tenseurs d'ordre quatre du type de l'élasticité, Proceedings of the Euromech Colloquium, pp.93-104, 1979.

A. Vincenti, P. Vannucci, and G. Verchery, Influence of orientation errors on quasi-homogeneity of composite laminates, Composites Science and Technology, vol.63, issue.5, pp.739-749, 2003.
DOI : 10.1016/S0266-3538(02)00263-4

A. Vinet, Identification d'une loi de comportement viscoélastique-viscoplastique pour des stratifiés aéronautiques. Prévision du comportement à long terme à l'aide d'essais accélérés, 1997.

J. R. Vinson and R. L. Sierakowski, The behaviour of structures composed of composite materials, 1987.

P. Volgers, Detailed 3D analysis of bolted joints in global shell structures, Proceedings of the 4th B2000 workshop, p.2002

M. Walker and R. E. Smith, A technique for the multiobjective optimisation of laminated composite structures using genetic algorithms and finite element analysis, Composite Structures, vol.62, issue.1, pp.123-128, 2003.
DOI : 10.1016/S0263-8223(03)00098-9

M. Walker and R. Hamilton, A methodology for optimally designing fibre-reinforced laminated structures with design variable tolerances for maximum buckling strength, Thin-Walled Structures 43, pp.161-174, 2005.
DOI : 10.1016/j.tws.2004.07.001

H. Wang and J. G. Croll, Optimisation of shell buckling using lower bound capacities, Thin-Walled Structures, p.35, 2008.
DOI : 10.1016/j.tws.2008.01.035

L. While, L. Bradstreet, L. Barone, and P. Hingstone, Heuristics for optimizing the calculation of hypervolume for multi-objective optimisation problems, CEC'05), 2005.

J. M. Whitney and R. J. Nuismer, Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.221, issue.3, pp.253-265, 1974.
DOI : 10.1177/002199837400800303

H. A. Whitworth, M. Othieno, and O. Barton, Failure analysis of composite pin loaded joints, Composite Structures, vol.59, issue.2, pp.261-266, 2003.
DOI : 10.1016/S0263-8223(02)00056-9

H. A. Whitworth, O. Aluko, and N. A. Tomlinson, Application of the point stress criterion to the failure of composite pinned joints", Engineering Fracture Machanics, 2007.

P. S. Wu and C. T. Sun, Modeling bearing failure initiation in pin-contact of composite laminates, Mechanics of Materials, vol.29, issue.3-4, pp.325-335, 1998.
DOI : 10.1016/S0167-6636(98)00019-2

Y. Xiao and T. Ishikawa, Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation), Composites Science and Technology, vol.65, issue.7-8, pp.1022-1031, 2005.
DOI : 10.1016/j.compscitech.2005.02.011

Y. Xiao and T. Ishikawa, Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation), Composites Science and Technology, vol.65, issue.7-8, pp.1032-1043, 2005.
DOI : 10.1016/j.compscitech.2004.12.049

G. M. Ziegler, Lectures on Polytopes, 1994.
DOI : 10.1007/978-1-4613-8431-1

E. Zitzler, Evolutionary Algorithms for Multiobjective Optimization: Methods end Applications, 1999.

E. Zitzler, M. Laumanns, and L. Thiele, SPEA2: Improving the Strength Pareto Evolutionary Algorithm Swiss Federal Institute of Technology (ETH) Zurich, 2001.