J. B. Park and R. Lakes, Biomaterials an introduction, pp.3-4, 1992.

R. A. Lehmann and M. Jenny, Tierexperimentelle und Histologische Ergebnisse bei der Frakturleimung mit dem Polyurethanpolymer Ostamer®, Schweiz. Med. Wochenschr, pp.91-908, 1961.

E. Heinrichen, K. Jansen, and W. Krogh-poulson, Experimental investigation of the tissue reaction to acrylic plastics, Acta Orthop. Scand, vol.22, pp.130-137, 1953.

L. Hullinger, Untersuchungen über die Wirkung von Kunstharzen in Gewebekulturen

J. Charnley, Anchorage of the femoral head prosthesis of the shaft of the femur, J. Bone Joint Surg, vol.42, pp.28-30, 1960.

J. Charnley, Acrylic cement in orthopaedic surgery, 1970.

D. F. Williams, Corrosion of orthopaedic implants, Biocompatibility of Orthopaedic Implants, Boca Raton, p.197, 1982.

D. F. Williams, Current Perspectives on Implantable Devices, pp.47-70, 1989.

J. M. Dorlot, P. Christel, L. Sedel, J. Witvoet, and P. Boutin, Examination of retrieved hip prosthesis: Wear of alumina/alumina components, Biological and biomechanical performances of biomaterials, p.495, 1986.

J. R. Cooper, L. Caravia, D. Dowson, and J. Fisher, Ceramic bearing surfaces in total artificial joints, J. Med. Eng. Tech, pp.15-63, 1991.

M. Semlitsch, M. Lehmann, H. Weber, E. Doerre, and H. Willert, New prospect for a prolonged functionnal life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramic/metal, J. Biomed. Mater. Res, pp.11-537, 1977.

J. L. Cartier, La cupule à double mobilité, principes de fonctionnement et conditions opératoires http://www.maitrise-orthop.com/corpusmaitri/orthopaedic Etude des phénomènes physico-chimiques d'un contact céramique-métal soumis à des sollicitations mécaniques en environnement corrosif, pp.121-63, 1992.

J. P. Paul, Loading on Normal Hip and Knee Joints and on Joint Replacements
DOI : 10.1007/978-3-642-66369-7_3

. Hohmann, Advances in hip and knee joint technology, pp.53-70, 1976.

T. Gruen, G. M. Mc-neice, and H. C. Amstutz, ???Modes of Failure??? of Cemented Stem-type Femoral Components, Clinical Orthopaedics and Related Research, vol.&NA;, issue.141, pp.141-158, 1979.
DOI : 10.1097/00003086-197906000-00002

F. Langlais, Prothèses articulaires : facteurs biologiques et mécanismes de tolérance, Conférences d'enseignement, cahiers d'enseignement de la SOFCOT n°19, Expansion scientifique française, 1983.

V. Maurice, W. P. Yang, and P. Marcus, X-Ray Photoelectron Spectroscopy and Scanning Tunneling Microscopy Study of Passive Films Formed on (100) Fe-18Cr-13Ni Single-Crystal Surfaces, Journal of The Electrochemical Society, vol.145, issue.3, pp.145-909, 1998.
DOI : 10.1149/1.1838366

R. L. Williams, S. A. Brown, and K. Meritt, Electrochemical studies on the influence of proteins on the corrosion of implant alloys, Biomaterials, vol.9, issue.2, p.181, 1988.
DOI : 10.1016/0142-9612(88)90119-6

M. G. Shettlemore and K. J. Bundy, Examination of in vivo influences on bioluminescent microbial assessment of corrosion product toxicity, Biomaterials, vol.22, issue.16, pp.2215-2228, 2001.
DOI : 10.1016/S0142-9612(00)00410-5

L. Tang and J. W. Eaton, Fibrin(ogen) mediates acute inflammatory responses to biomaterials, Journal of Experimental Medicine, vol.178, issue.6
DOI : 10.1084/jem.178.6.2147

R. B. Johnston-jr, C. Godzik, and Z. A. Cohn, Increased superoxide anion production by immunologically activated and chemically elicited macrophages, Journal of Experimental Medicine, vol.148, issue.1, pp.148-115, 1978.
DOI : 10.1084/jem.148.1.115

T. Hanawa, Metal ion release from metal implants, Materials Science and Engineering: C, vol.24, issue.6-8, pp.745-752, 2004.
DOI : 10.1016/j.msec.2004.08.018

P. Tegvall, I. Lundstrom, L. Sjoqvist, H. Elwing, and L. M. Bjursten, Titanium-hydrogen peroxide interaction: model studies of the influence of the inflammatory response on titanium implants, Biomaterials, vol.10, issue.3, p.166, 1989.
DOI : 10.1016/0142-9612(89)90019-7

C. H. Lohmann, D. D. Dean, G. Kôster, D. Casasola, G. H. Buchhorn et al., Ceramic and PMMA particles differentially affect osteoblast phenotype, Biomaterials, vol.23, issue.8, pp.1855-1863, 2001.
DOI : 10.1016/S0142-9612(01)00312-X

J. M. Crolet, P. Christel, P. Derethe, F. Lelong, and L. Sedel, A mathematical model for distribution of contact pressures in total hip prosthesis, Journal of Biomechanics, vol.13, issue.9, p.807, 1980.
DOI : 10.1016/0021-9290(80)90299-7

P. Christel, A. Meunier, D. Blanquaert, J. Witvoet, and L. Sedel, Role of stem design and material on stress distributions in cemented total hip replacement, Journal of Biomedical Engineering, vol.10, issue.1, pp.57-63, 1988.
DOI : 10.1016/0141-5425(88)90027-1

S. A. Brown and K. Merrit, Fretting corrosion in saline and serum, Journal of Biomedical Materials Research, vol.14, issue.4, pp.479-488, 1981.
DOI : 10.1002/jbm.820150404

P. J. Rubin, R. L. Rakotomanana, P. F. Leyvraz, P. K. Zysset, A. Curnier et al., Frictional interface micromotions and anisotropic stress distribution in a femoral total hip component, Journal of Biomechanics, vol.26, issue.6, pp.725-739, 1993.
DOI : 10.1016/0021-9290(93)90035-D

M. Barquins, La tribologie : la science pour maîtriser et comprendre le frottement et l'usure, Bulletin de l'union des physiciens, France, pp.765-949, 1994.

Y. Berthier, Systèmes tribologiques Matériaux et contacts : une approche tribologique, Presses Polytechniques et Universitaires Romandes, pp.3-8, 1998.

C. A. Coulomb, Essai sur une application des règles de Maximis et Minimis à quelques problèmes de statique relatifs à l'architecture, Mémoires de mathématiques et de physique de l, Académie Royale des Sciences, pp.1773-343

G. Amontons, Du frottement de diverses matières les unes contre les autres, Histoire de l, Académie Royale des Sciences, pp.432-445

F. P. Bowden and D. Tabor, The friction and lubrification of solids, p.180, 1954.

D. Tabor, The role of surface and intermolecular forces in thin film lubrication Microscopic aspects of adhesion and lubrication, Tribology Series, pp.651-682, 1982.

M. Godet, The third-body approach: A mechanical view of wear, Wear, vol.100, issue.1-3, pp.437-452, 1984.
DOI : 10.1016/0043-1648(84)90025-5

Y. Berthier, L. Vincent, and M. Godet, Fretting fatigue and fretting wear, Tribology International, vol.22, issue.4, pp.235-242, 1989.
DOI : 10.1016/0301-679X(89)90081-9

Y. Berthier, Mécanismes et tribologie, Thèse INSA de Lyon, pp.88-0050, 1988.

Y. Berthier, L. Vincent, and M. Godet, L'usure et la fissuration induite en petits débattements, genèse, formalismes et remèdes, Mécanique Matériaux Electricité, vol.428, pp.20-26, 1988.

M. Antler, Electrical effects of fretting connector contact materials: A review, Wear, vol.106, issue.1-3, pp.5-33, 1985.
DOI : 10.1016/0043-1648(85)90101-2

E. M. Eden, W. Rose, and F. L. Cunningham, The endurance of metals, Proc. Instn. Mech. Engrs, p.875, 1911.

G. A. Tomlison, The Rusting of Steel Surfaces in Contact, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.115, issue.771, pp.472-483, 1927.
DOI : 10.1098/rspa.1927.0104

O. J. Mcdowell, Fretting corrosion tendencies of several combinations of materials, Symposium on fretting corrosion, pp.40-53, 1953.

C. Cattaneo, Sul contatto di due corpi elastici : distribuzione locale degli sforzi, Rendiconti dell'Accademia dei lincei 27, pp.343-348434, 1938.

R. D. Mindlin, Compliance of Elastic Bodies in Contact, ASME, Serie E Journal of Applied Mechanics, vol.16, pp.259-268, 1949.
DOI : 10.1007/978-1-4613-8865-4_24

R. B. Waterhouse, Fretting wear, Wear, vol.100, issue.1-3, pp.107-118, 1984.
DOI : 10.1016/0043-1648(84)90008-5

R. B. Waterhouse, Fretting fatigue, International Materials Reviews, vol.23, issue.1, pp.77-97, 1992.
DOI : 10.1063/1.329977

R. Waterhouse, Fretting corrosion, p.4, 1975.

R. D. Mindlin and H. Deresiewicz, Elastic Spheres in Contact Under Varying Oblique Forces, ASME, Serie E Journal of Applied Mechanics, vol.20, pp.327-344, 1953.
DOI : 10.1007/978-1-4613-8865-4_35

K. L. Johnson, Surface Interaction between Elastically Loaded Bodies under Tangential Forces, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.230, issue.1183
DOI : 10.1098/rspa.1955.0149

F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, American Journal of Physics, vol.19, issue.7, pp.5-17, 1975.
DOI : 10.1119/1.1933017

M. Odfalk and O. Vingsbo, Influence of Normal Force and Frequency in Fretting??, Tribology Transactions, vol.31, issue.4, pp.604-610, 1990.
DOI : 10.1016/0043-1648(86)90148-1

O. Vingsbo and S. Soderberg, On fretting maps, Wear, vol.126, issue.2, pp.131-147, 1988.
DOI : 10.1016/0043-1648(88)90134-2

Z. R. Zhou and L. Vincent, Mixed fretting regime, pp.181-183, 1995.

C. Colombié, Usure induite par petits débattements, Thèse Ecole Centrale de Lyon, pp.86-97, 1986.

V. Pellerin, Etude du comportement en usure induite sous petits débattements d'alliages d'aluminium et de titane, pp.90-91, 1990.

P. Rougier, M. Barquins, and R. , Mechanisms of the sliding wear of rubber, Wear, vol.43, issue.1, pp.141-150, 1977.
DOI : 10.1016/0043-1648(77)90049-7

P. Blanchard, C. Colombié, V. Pellerin, S. Fayeulle, and L. Vincent, Material effects in fretting wear: application to iron, titanium, and aluminum alloys, Metallurgical Transactions A, vol.22, issue.4, pp.22-1535, 1991.
DOI : 10.1007/BF02667367

E. Salvati, F. Betts, and W. Brien, A comparison of stainless steel, cobalt chrome and titanium alloy metal levels in well fixed and failed cemented THR, 20th Meeting Hip Society, 1992.

F. Langlais, Tolérance des prothèses totales de hanche en alliage de titane, Ann. Orthop. Ouest, [68] A.M. Rozanova, S.V. Perfil'ev, Nature and properties of secondary structures formed during fretting corrosion, Metal Science and Heat treatment, pp.20-629, 1978.

S. D. Cook, G. J. Gianoli, A. J. Clemow, and R. J. Haddad, Fretting Corrosion in Orthopaedic Alloys, Biomaterials, Medical Devices, and Artificial Organs, vol.14, issue.4, pp.11-281, 1983.
DOI : 10.3109/10731198309118814

C. N. Kraft, B. Burian, O. Diedrich, and M. A. Wimmer, Implications of orthopedic fretting corrosion particles on skeletal muscle microcirculation, J. Mater. Sci. Mater. Med, pp.12-1057, 2001.

K. Meritt and S. A. Brown, Effect of proteins and pH on fretting corrosion and metal ion release, Journal of Biomedical Materials Research, vol.11, issue.2
DOI : 10.1002/jbm.820220204

K. Meritt and S. A. Brown, Release of hexavalent chromium from corrosion of stainless steel and cobalt?chromium alloys, Journal of Biomedical Materials Research, vol.74, issue.5, pp.29-627, 1995.
DOI : 10.1002/jbm.820290510

S. A. Brown and J. P. Simpson, Crevice and fretting corrosion of stainless-steel plates and screws, Journal of Biomedical Materials Research, vol.601, issue.6
DOI : 10.1002/jbm.820150611

P. Kapsa, Tribologie et contact, Contacts entre solides, Cours 13-15 octobre, 1998.

J. L. Pignet, Méthodes non destructives pour l'étude et le contrôle des matériaux, Editions de la revue optique, pp.102-110, 1957.

J. P. Trotignon, J. Verdu, A. Dobraczynski, and M. Piperaud, Matières Plastiques Structures-propriétés, mise en oeuvre, normalisation, p.53, 1996.

R. Kusy, J. Q. Whitley, and S. Kalachandra, Mechanical properties and interrelationships of poly(methyl methacrylate) following hydration over saturated salts, Polymer, vol.42, issue.6, pp.2585-2595, 2000.
DOI : 10.1016/S0032-3861(00)00613-3

K. D. Kühn, Bone Cements Up-to-Date Comparison of Physical and Chemical Properties of Commercial Materials, pp.109-113, 2000.

J. Geringer, Etude mécanique du contact entre biomatériaux, 2002.

N. Dahmani, L. Vincent, B. Vannes, Y. Berthier, and M. Godet, Velocity accommodation in polymer fretting, Wear, vol.158, issue.1-2, pp.15-28, 1992.
DOI : 10.1016/0043-1648(92)90027-6

D. Goeuriot and Y. Surrel, Méthodes d'analyse, cours ENSM-SE, 1995.

J. P. Lauriat, Introduction à la cristallographie et à la diffraction des rayons X et des neutrons, 1999.

R. Fillit, Diffraction des rayons X-Méthodes d'analyse et de caractérisation des matériaux, cours ENSM-SE, 2000.

N. Broll, Caractérisation de solides cristallisés par diffraction X, Techniques de l'ingénieur PE 1, pp.80-87, 2005.

M. Dalibart and L. Servant, Spectroscopie dans l'infrarouge, Techniques de l'ingénieur P 2, p.845, 2005.

M. Hamon, F. Pellerin, M. Guernet, and G. Mahuzier, Chimie analytique?méthodes spectrales et analyse organique, pp.51-92, 1990.

P. R. Griffiths and J. A. Haseth, Fourier Transform Infrared Spectrometry, Wiley-Interscience publication, pp.81-119, 1986.

J. L. Gardette, Caractérisation des polymères par spectrométrie optique, Techniques de l'ingénieur PE 3, p.762, 2005.

B. Jasse, Analyse de la structure des polymères par spectroscopie de vibration, Initiation à la chimie et à la physico-chimie macromoléculaires, pp.81-89, 1990.

F. M. Fowkes, Role of acid-base interfacial bonding in adhesion, Journal of Adhesion Science and Technology, vol.37, issue.1, pp.7-27, 1987.
DOI : 10.1163/156856187X00049

Y. Grohens, M. Brogly, C. Labbe, and J. Schultz, Interfacial conformation energies of stereoregular poly(methyl methacrylate) by infra-red reflection absorption spectroscopy, Polymer, vol.38, issue.24, pp.5913-5920, 1997.
DOI : 10.1016/S0032-3861(97)00168-7

J. Chen, G. Zheng, L. Xu, J. Zhang, Y. Lu et al., Spectroscopic study of ordered structures of atactic poly(methyl methacrylate) freeze-extracted from poly(ethylene glycol) solution, Polymer, vol.42, issue.9, pp.4459-4462, 2001.
DOI : 10.1016/S0032-3861(00)00749-7

M. Fontanille and Y. Gnanou, Chimie et physico-chimie des polymères, pp.375-384, 2002.

F. Laupetre, Résonance magnétique nucléaire en solution-Principes et applications à l'étude de la structure chimique des polymères, pp.51-79, 1990.

J. L. Koenig, Spectroscopy of polymers Library of congress Cataloging-in-Publication Data, pp.137-162, 1992.

S. Fouvry, Etude quantitative des dégradations en fretting, pp.97-101, 1997.

J. M. Voisin, Méthodologie pour l'étude de l'endommagement d'un contact tube-grille, Thèse de l'Ecole Centrale de Lyon, 1992.

L. M. Keer and T. N. Farris, Effects of Finite Thickness and Tangential Loading on Development of Zones of Microslip in Fretting, A S L E Transactions, vol.19, issue.2, pp.203-210, 1987.
DOI : 10.1098/rspa.1985.0011

Z. R. Zhou, Fissuration induite en petits débattements : application au cas d'alliages d'aluminium aéronautiques, Thèse de l'Ecole Centrale de Lyon, pp.92-50, 1992.

S. Bouissou, J. P. Petit, and M. Barquins, Normal load, slip rate and roughness influence on the polymethylmethacrylate dynamics of sliding 1. Stable sliding to stick-slip transition, Wear, vol.214, issue.2, pp.156-164, 1998.
DOI : 10.1016/S0043-1648(97)00242-1

A. Krichen, Simulation numérique et analyse expérimentale du comportement d'un contact verre/PMMA sous sollicitation de fretting, Thèse de l'Ecole Centrale de Lyon, pp.97-118, 1997.

S. Bouissou, J. P. Petit, and M. Barquins, Normal load, slip rate and roughness influence on the PMMA dynamics of sliding 2. Characterisation of the stick-slip phenomenon, Wear, vol.215, issue.1-2, pp.137-145, 1998.
DOI : 10.1016/S0043-1648(97)00268-8

L. Duisabeau, P. Combrade, and B. Forest, Environmental effect on fretting of metallic materials for orthopaedic implants, Wear, vol.256, issue.7-8, pp.805-816, 2004.
DOI : 10.1016/S0043-1648(03)00522-2

S. Fouvry, P. Kapsa, H. Zahouani, and L. Vincent, Wear analysis in fretting of hard coatings through a dissipated energy concept, Wear, vol.203, issue.204, pp.203-204, 1997.
DOI : 10.1016/S0043-1648(96)07436-4

J. F. Archard, Contact and Rubbing of Flat Surfaces, Journal of Applied Physics, vol.24, issue.8, pp.981-988, 1953.
DOI : 10.1063/1.1721448

A. Kapoor, Wear by plastic ratchetting, Wear, vol.212, issue.1, pp.119-130, 1997.
DOI : 10.1016/S0043-1648(97)00083-5

S. Fouvry, T. Liskiewicz, P. Kapsa, S. Hannel, and E. Sauger, An energy description of wear mechanisms and its applications to oscillating sliding contacts, Wear, vol.255, issue.1-6, pp.255-287, 2003.
DOI : 10.1016/S0043-1648(03)00117-0

T. Liskiewicz, S. Fouvry, and B. Wendler, Impact of variable loading conditions on fretting wear, Surface and Coatings Technology, vol.163, issue.164, pp.163-164, 2003.
DOI : 10.1016/S0257-8972(02)00643-6

A. Chateauminois and B. J. Briscoe, Nano-rheological properties of polymeric third bodies generated within fretting contacts, Surface and Coatings Technology, vol.163, issue.164, pp.163-164, 2003.
DOI : 10.1016/S0257-8972(02)00640-0

S. Fouvry, P. Kapsa, H. Zahouani, and L. Vincent, Wear analysis in fretting of hard coatings through a dissipated energy concept, Wear, vol.203, issue.204, pp.203-204, 1997.
DOI : 10.1016/S0043-1648(96)07436-4

Y. Grohens, M. Brogly, C. Labbe, and J. Schultz, Chain flattening of spin-cast PMMMA on aluminum mirrors: Influence of polymer tacticity, European Polymer Journal, vol.33, issue.5, pp.691-697, 1997.
DOI : 10.1016/S0014-3057(96)00226-1

B. Tritschler, B. Forest, and J. Rieu, Fretting corrosion of materials for orthopaedic implants: a study of a metal/polymer contact in an artificial physiological medium, Tribology International, vol.32, issue.10, pp.32-587, 1999.
DOI : 10.1016/S0301-679X(99)00099-7

J. Jiang and M. M. Stack, Modelling sliding wear: From dry to wet environments, Wear, vol.261, issue.9, 2004.
DOI : 10.1016/j.wear.2006.03.028

M. K. Sawford, B. G. Ateya, A. M. Abdullah, and H. W. Pickering, The Role of Oxygen on the Stability of Crevice Corrosion, Journal of The Electrochemical Society, vol.149, issue.6, pp.198-205, 2002.
DOI : 10.1149/1.1470655

P. Combrade, The crevice corrosion of metallic materials, Framatome, confidential report, 2001.

H. W. Pickering, K. Cho, and E. Nystrom, Microscopic and local probe method for studying crevice corrosion and its application to iron and stainless steel, Corrosion Science, vol.35, issue.1-4, pp.775-781, 1993.
DOI : 10.1016/0010-938X(93)90215-3

H. W. Pickering, The role of electrode potential distribution in corrosion processes, Materials Science and Engineering: A, vol.198, issue.1-2, pp.213-223, 1995.
DOI : 10.1016/0921-5093(95)80076-7

S. Barril, N. Debaud, S. Mischler, and D. Landolt, A tribo-electrochemical apparatus for in vitro investigation of fretting???corrosion of metallic implant materials, Wear, vol.252, issue.9-10, pp.744-754, 2002.
DOI : 10.1016/S0043-1648(02)00027-3

A. N. Bezbaruah and T. C. Zhang, An innovative electro-corrosion recess creation technique for improved microelectrode fabrication, Water Research, vol.36, issue.17, pp.4428-4432, 2002.
DOI : 10.1016/S0043-1354(02)00138-0

H. Krawiec, V. Vignal, and R. Oltra, Use of the electrochemical microcell technique and the SVET for monitoring pitting corrosion at MnS inclusions, Electrochemistry Communications, vol.6, issue.7, pp.655-660, 2004.
DOI : 10.1016/j.elecom.2004.05.001

D. R. Lide, Handbook of Chemistry and Physics, 2004.

R. J. Brigham, Crevice corrosion initiation and the potential of zero charge, Corrosion Science, vol.29, issue.8, pp.995-1001, 1989.
DOI : 10.1016/0010-938X(89)90089-9

J. Besson, Précis de thermodynamique et cinétique électrochimiques, Ellipses Marketing, pp.65-107, 1998.

A. W. Adamson, Physical chemistry of surfaces 4 th Ed, pp.196-231, 1982.

P. C. Hiemenz and R. Rajagopalan, Principles of Colloïd and Surface Chemistry, pp.502-524, 1997.
DOI : 10.1201/9781315274287

J. P. Jolivet, De la solution à l'oxyde, Condensation des cations en solution aqueuse, Chimie de surface des oxydes, CNRS Editions, pp.255-308, 1994.

D. Landolt, Corrosion et chimie des surfaces des métaux, Presses polytechniques et universitaires romandes, pp.386-388, 1997.

N. E. Hakiki, S. Boudin, B. Rondot, M. Da-cunha, and . Belo, The electronic structure of passive films formed on stainless steels, Corrosion Science, vol.37, issue.11, pp.1809-1822, 1995.
DOI : 10.1016/0010-938X(95)00084-W

A. Turnbull and D. H. Ferriss, Mathematical modelling of the electrochemistry in corrosion fatigue cracks in steel corroding in marine environments, Corrosion Science, vol.27, issue.12, pp.1323-1350, 1987.
DOI : 10.1016/0010-938X(87)90129-6

S. C. Lim and F. Ashby, Overview no. 55 Wear-Mechanism maps, Acta Metallurgica, vol.35, issue.1, pp.1-24, 1987.
DOI : 10.1016/0001-6160(87)90209-4

M. M. Stack, N. Corlett, and S. Zhou, A methodology for the construction of the erosion-corrosion map in aqueous environments, Wear, vol.203, issue.204, pp.203-204, 1997.
DOI : 10.1016/S0043-1648(96)07386-3

M. M. Stack, N. Corlett, and S. Turgoose, Some recent advances in the development of theoretical approaches for the construction of erosion???corrosion maps in aqueous conditions, Wear, vol.233, issue.235, pp.233-235, 1999.
DOI : 10.1016/S0043-1648(99)00218-5

M. M. Stack, Looking beyond the millennium: critical issues in the evaluation of materials performance for resistance to erosive wear in corrosive conditions, Wear, vol.233, issue.235, pp.233-235, 1999.
DOI : 10.1016/S0043-1648(99)00233-1

M. M. Stack and N. Pungwiwat, Particulate erosion???corrosion of Al in aqueous conditions: some perspectives on pH effects on the erosion???corrosion map, Tribology International, vol.35, issue.10, pp.35-651, 2002.
DOI : 10.1016/S0301-679X(02)00056-7

M. M. Stack and K. Chi, Mapping sliding wear of steels in aqueous conditions, Wear, vol.255, issue.1-6, pp.456-465, 2003.
DOI : 10.1016/S0043-1648(03)00203-5

M. M. Stack, N. Corlett, and S. Turgoose, Some thoughts on modeling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries, pp.255-225, 2003.

S. Mischler, A. Spiegel, and D. Landolt, The role of passive oxide films on the degradation of steel in tribocorrosion systems, Wear, vol.225, issue.229, pp.229-1078, 1999.
DOI : 10.1016/S0043-1648(99)00056-3

S. Mischler, A. Spiegel, M. Stemp, and D. Landolt, Influence of passivity on the tribocorrosion of carbon steel in aqueous solutions, Wear, vol.251, issue.1-12, pp.1295-1307, 2001.
DOI : 10.1016/S0043-1648(01)00754-2

S. Barril, N. Debaud, S. Mischler, and D. Landolt, A tribo-electrochemical apparatus for in vitro investigation of fretting???corrosion of metallic implant materials, Wear, vol.252, issue.9-10, pp.744-754, 2002.
DOI : 10.1016/S0043-1648(02)00027-3

S. Barril, S. Mischler, and D. Landolt, Electrochemical effects on the fretting corrosion behaviour of Ti6Al4V in 0.9% sodium chloride solution, Wear, vol.259, issue.1-6, pp.282-291, 2005.
DOI : 10.1016/j.wear.2004.12.012

D. D. Macdonald, Passivity???the key to our metals-based civilization, Pure and Applied Chemistry, vol.71, issue.6, pp.71-951, 1999.
DOI : 10.1351/pac199971060951

D. D. Macdonald, On the existence of our metals-based civilization: I. Phase space analysis, Journal of the Electrochemical Society
DOI : 10.2172/859069

J. Liu and D. D. Macdonald, The Passivity of Iron in the Presence of Ethylenediaminetetraacetic Acid. II. The Defect and Electronic Structures of the Barrier Layer, Journal of The Electrochemical Society, vol.148, issue.11, pp.425-430, 2001.
DOI : 10.1149/1.1404967

M. F. Montemor, M. G. Ferreira, N. E. Hakiki, M. Da-cunha, and . Belo, Chemical composition and electronic structure of the oxide films formed on 316L stainless steel and nickel based alloys in high temperature aqueous environments, Corrosion Science, vol.42, issue.9, pp.42-1635, 2000.
DOI : 10.1016/S0010-938X(00)00012-3

N. E. Hakiki, M. F. Montemor, M. G. Ferreira, M. Da-cunha, and . Belo, Semiconducting properties of thermally grown oxide films on AISI 304 stainless steel, Corrosion Science, vol.42, issue.4, pp.42-687, 2000.
DOI : 10.1016/S0010-938X(99)00082-7

C. R. Clayton and I. Olejford, Passivity of Austenitic Stainless Steels, Corrosion Mechanisms in Theory and Practice, pp.217-241, 2002.

N. E. Hakiki, M. Da-cunha, and . Belo, Semiconducting Properties of Passive Films Formed on Stainless Steels, Journal of The Electrochemical Society, vol.145, issue.11, pp.3821-3829, 1998.
DOI : 10.1149/1.1838880

V. Vignal, C. Valot, R. Oltra, M. Verneau, and L. Coudreuse, Analogy between the effects of a mechanical and chemical perturbation on the conductivity of passive films, Corrosion Science, vol.44, issue.7, pp.44-1477, 2002.
DOI : 10.1016/S0010-938X(01)00162-7

F. Gaben, B. Vuillemin, and R. Oltra, Influence of the Chemical Composition and Electronic Structure of Passive Films Grown on 316L SS on Their Transient Electrochemical Behavior, Journal of The Electrochemical Society, vol.151, issue.11, pp.595-604, 2004.
DOI : 10.1149/1.1803562

D. M. Etter and J. A. Ingber, Engineering Problem Solving with C++, Pearson Education INC, Upper Saddle River, 2003.

B. Marx, last results obtained by ellipsometry, group presentation

M. Vankeerberghen and D. D. Macdonald, Predicting crack growth rate vs. temperature behaviour of Type 304 stainless steel in dilute sulphuric acid solutions, Corrosion Science, vol.44, issue.7, pp.1425-1441, 2002.
DOI : 10.1016/S0010-938X(01)00151-2

P. Combrade, Crevice Corrosion of Metallic Materials, Corrosion Mechanisms in Theory and Practice, pp.349-397, 2002.

M. Wang, S. Yao, and M. Madou, A long-term stable iridium oxide pH electrode, Sensors and Actuators B: Chemical, vol.81, issue.2-3, pp.313-315, 2002.
DOI : 10.1016/S0925-4005(01)00972-8