138 4.5.1 Mise en défaut de la formule quasi-statique, p.141 ,
181 6.1.1 Description de l'absorbeur-test 181 6.1.2 Présentation de la formulation corrotationnelle utilisée pour le non-linéaire géométrique, p.181 ,
A spacetime discontinuous Galerkin method for elastodynamics with element-level balance of linear momentum, 2006. ,
Elastodynamic Near-Tip Stress and Displacement Fields for Rapidly Propagating Cracks in Orthotropic Materials, Journal of Applied Mechanics, vol.42, issue.1, pp.183-189, 1975. ,
DOI : 10.1115/1.3423513
Mise au point d'une méthode optique pour le suivi de propagation de délaminage dans les composites, 2006. ,
Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues, International Journal for Numerical Methods in Engineering, vol.26, issue.7, pp.1701-1736, 2001. ,
DOI : 10.1002/nme.93
Effects of strain rate on delamination fracture toughness of graphite/epoxy. Delamination and debondings of materials, STPASTM), vol.876, pp.336-348, 1985. ,
Modeling and simulation of crack propagation in mixed-modes interlaminar fracture specimens, International Journal of Fracture, vol.13, issue.1, pp.111-140, 1996. ,
DOI : 10.1007/BF00037233
Damage mesomodelling for the fracture prediction of laminated composites under dynamic loading. Engineering Transactions 29, pp.1148-1155, 1997. ,
Interlaminar interface modelling for the prediction of delamination, Composite Structures, vol.22, issue.4, pp.235-242, 1992. ,
DOI : 10.1016/0263-8223(92)90060-P
Damageable interface for dynamic crack propagation : comparison with linear fracture mechanics, 2nd Int. Conference on Fracture and Damage Mechanics, M. Guagliano and M.H. Aliabadi Eds, Hoggar, pp.365-370, 2001. ,
Modelling and identification of the mechanical behaviour of composite laminates in compression, Composites Science and Technology, vol.51, issue.1, pp.35-42, 1994. ,
DOI : 10.1016/0266-3538(94)90154-6
Necessity of using damage mechanics for the analysis of delamination specimens, COMPLAS IV : 4th International Conference on Computational Plasticity and Fundamentals and Applications, pp.1057-1068, 1995. ,
Identification and forecast of delamination in composite laminates by an interlaminar interface model, Composites Science and Technology, vol.58, issue.5, pp.671-678, 1998. ,
DOI : 10.1016/S0266-3538(97)00144-9
Modeling of the degradation of laminates under impact : some keypoints, Proceedings of the 22nd International Congress of Theoretical and Applied Mechanics, 2008. ,
Un modèle de matériau microfissuré pour les roches et les bétons, Journal de Mécanique Théorique et Appliquée, vol.5, issue.3, pp.471-513, 1986. ,
Anisotropic strength of components, Experimental Mechanics, vol.5, pp.286-288, 1965. ,
Compressive failure model for fiber composites by kink band initiation from obliquely aligned, shear-dislocated fiber breaks, International Journal of Solids and Structures, vol.42, issue.7, pp.2089-2128, 2005. ,
DOI : 10.1016/j.ijsolstr.2004.08.011
Influence de la vitesse de sollicitation sur le comportement de compositesàcompositesà matricesépoxydesmatricesépoxydes The mathematical theory of equilibrium of cracks in brittle fracture, EPFL Lausanne Barenblatt GI Advances in Applied Mechanics, vol.7, pp.55-129, 1962. ,
Elastic crack growth in finite elements with minimal remeshing, International Journal for Numerical Methods in Engineering, vol.55, issue.5, pp.601-620, 1999. ,
DOI : 10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S
Computationnal methods for transient analysis . North-Holland Benzeggagh ML, Aboura Z (1991) Délaminage mode I et II de compositesàcompositesà renfort tissu sollicitéssollicitésà faibles et grandes vitesses, 1951. ,
Effect of off-axis ply orientation on 0??-fibre microbuckling, Composites Part A: Applied Science and Manufacturing, vol.30, issue.10, pp.1197-1207, 1999. ,
DOI : 10.1016/S1359-835X(99)00026-3
???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.789-804, 2006. ,
DOI : 10.1007/s11340-006-9824-8
Crashworthiness of helicopter subfloor structures, International Journal of Impact Engineering, vol.27, issue.10, pp.1067-1082, 2002. ,
DOI : 10.1016/S0734-743X(02)00015-5
Progressive crushing of fiber-reinforced composite structural components of a Formula One racing car, Composite Structures, vol.68, issue.4, pp.491-503, 2005. ,
DOI : 10.1016/j.compstruct.2004.04.015
Application of incubation time approach to simulate dynamic crack propagation, International Journal of Fracture, vol.42, issue.1-2, pp.53-60, 2007. ,
DOI : 10.1007/s10704-007-9135-9
Dynamic crack propagation in a layer, International Journal of Solids and Structures, vol.32, issue.6-7, pp.883-896, 1995. ,
DOI : 10.1016/0020-7683(94)00166-T
Mécanique de la Rupture Fragile, 1978. ,
Computational modelling of impact damage in brittle materials, International Journal of Solids and Structures, vol.33, issue.20-22, pp.20-222899, 1996. ,
DOI : 10.1016/0020-7683(95)00255-3
Multi-particle modelling for the prediction of delamination in multi-layered materials, Composites Science and Technology, vol.66, issue.6, pp.755-765, 2006. ,
DOI : 10.1016/j.compscitech.2004.12.022
Lagrange constraints for transient finite element surface contact, International Journal for Numerical Methods in Engineering, vol.1, issue.1, pp.103-128, 1991. ,
DOI : 10.1002/nme.1620320107
URL : https://hal.archives-ouvertes.fr/hal-01389918
A Progressive Damage Model for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.21, issue.9, pp.834-855, 1987. ,
DOI : 10.1177/002199838702100904
A Model for Predicting Damage in Graphite/Epoxy Laminated Composites Resulting from Low-Velocity Point Impact, Journal of Composite Materials, vol.26, issue.14, pp.2134-2169, 1992. ,
DOI : 10.1177/002199839202601408
Effects of Impact Loading Rate on the Delamination Behavior of Composite Laminates, Key Engineering Materials, vol.183, issue.187, pp.183-187247, 2000. ,
DOI : 10.4028/www.scientific.net/KEM.183-187.247
Experimental observations of intersonic crack growth in axisymmetrically loaded unidrectional composites plates, Philosophical Magazine A, vol.81, issue.3, 2001. ,
Some aspects of interlaminar degradation in composites, Computer Methods in Applied Mechanics and Engineering, vol.185, issue.2-4, pp.203-224, 2000. ,
DOI : 10.1016/S0045-7825(99)00260-1
Rate-dependent interface models: formulation and numerical applications, International Journal of Solids and Structures, vol.38, issue.4, pp.547-576, 2001. ,
DOI : 10.1016/S0020-7683(00)00088-3
Numerical analysis of rate-dependent dynamic composite delamination, Composites Science and Technology, vol.66, issue.6, pp.766-775, 2006. ,
DOI : 10.1016/j.compscitech.2004.12.031
Prévision objective de la rupture ductile en grandes déformations sous sollicitation dynamique : Modèle d'´ epuisement plastiquè a taux limité, 2005. ,
Dimensionnement en dynamique rapide de multi-mat????riaux utilis????s en a????ronautique, M????canique & Industries, vol.2, issue.1, pp.23-31, 2001. ,
DOI : 10.1016/S1296-2139(00)01079-4
A fast incremental/iterative solution procedure that handles ???snap-through???, Computers & Structures, vol.13, issue.1-3, pp.55-62, 1981. ,
DOI : 10.1016/0045-7949(81)90108-5
Modélisation d'un délaminage avec ponts de fibres dans différentesdifférenteséprouvettes composites, Comptes rendus des 9` emes Journées Nationales sur les Composites, pp.393-402, 1994. ,
Measurement of GIc and GIIc in carbon/epoxy composites, Composites Science and Technology, vol.39, issue.3, pp.193-205, 1990. ,
DOI : 10.1016/0266-3538(90)90041-3
Failure Criteria for FRP Laminates, Journal of Composite Materials, vol.39, issue.4, pp.323-345, 2005. ,
DOI : 10.1177/0021998305046452
Dynamic fragmentation of brittle solids: a multi-scale model, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.105-120, 2002. ,
DOI : 10.1016/S0997-7538(01)01187-1
URL : https://hal.archives-ouvertes.fr/hal-00013965
Sur la modélisation et simulation de liaisons soumisesà soumisesà des chocs pyrotechniques, pp.587-592, 2002. ,
Software application for evaluating interfacial stresses in inelastic symmetrical laminates with free edges, Composite Structures, vol.58, issue.2, pp.195-208, 2002. ,
DOI : 10.1016/S0263-8223(02)00123-X
Analytical determination of the modes I, II and III energy release rates in a delaminated laminate and validation of a delamination criterion, Composite Structures, vol.78, issue.3, pp.424-432, 2007. ,
DOI : 10.1016/j.compstruct.2005.11.003
Etude au crash d'un composite stratifié : apport de la similitude, Actes duCinquì eme Colloque National en Calcul de Structures, Giens, 2001. ,
A structural approach of plastic microbuckling in long fibre composites: comparison with theoretical and experimental results, International Journal of Solids and Structures, vol.38, issue.22-23, pp.3877-3904, 2001. ,
DOI : 10.1016/S0020-7683(00)00247-X
Dynamic fragmentation of brittle materials: analytical mechanics-based models, Journal of the Mechanics and Physics of Solids, vol.49, issue.6, pp.1181-1208, 2001. ,
DOI : 10.1016/S0022-5096(01)00002-3
Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960. ,
DOI : 10.1016/0022-5096(60)90013-2
Rupture dynamique ou rupture quasistatique : quelquesélémentsquelqueséléments de comparaison Compressive failure of impacted NCF composite sandwich panels -Characterisation of the failure process, Proceedings du 8` eme Colloque national en calcul des structures, pp.495-514, 2004. ,
Failure mechanism analysis under compression loading of unidirectional carbon/epoxy composites using micromechanical modelling, Composite Structures, vol.31, issue.2, pp.87-98, 1995. ,
DOI : 10.1016/0263-8223(94)00060-3
Evaluation au délaminage de matériaux composites pour pales, pp.2-96, 1996. ,
A 3-D Finite Deformation Anisotropic Visco-Plasticity Model for Fiber Composites, Journal of Composite Materials, vol.45, issue.11, pp.369-410, 2001. ,
DOI : 10.1177/002199801772662154
A critical evaluation of cohesive zone models of dynamic fracture, Journal de Physique IV France, vol.11, pp.43-50, 2001. ,
High strain rate compression of fiber composites, Journal of the Mechanics and Physics of Solids, vol.45, issue.5, pp.731-751, 1997. ,
DOI : 10.1016/S0022-5096(96)00101-9
Prediction of the Energy-Absorption Capability of Composite Tubes, Journal of Composite Materials, vol.101634, issue.3, pp.388-404, 1992. ,
DOI : 10.1177/002199839202600304
Crash modelling of automative structural parts made of composite materials, Society of Automative Engineers Transactions, vol.108, issue.5, pp.200-208, 1999. ,
´ energie dans les composites stratifiés Master's thesis, Ens Cachan A systematic approach to the element-independent corotational dynamics of finite elements) A unified formulation of small-strain corotational finite elements : I. theory, Course Notes CU-CAS-00-03, Center for Aerospace structures, pp.2285-2335, 2000. ,
ContributionàContributionà l'´ evaluation du degré de mixité pour une fissure aux interfaces asymétriques, 1997. ,
Prediction of Kink Width in Compressed Fiber Composites, Journal of Applied Mechanics, vol.62, issue.2, pp.329-337, 1995. ,
DOI : 10.1115/1.2895935
Delamination Modeling of Composites for Improved Crash Analysis, Journal of Composite Materials, vol.35, issue.19, pp.1777-1792, 2001. ,
DOI : 10.1177/002199801772661542
Finite Element Simulation of Delamination with Application to Crashworthy Design, Proceedings of the American Helicopter Society 62nd Annual Forum, 2006. ,
DOI : 10.4050/JAHS.53.267
Influence of crack speed on fracture energy in amorphous and rubber toughened amorphous polymers, Plastics, Rubber and Composites, vol.28, issue.14, pp.116-124, 2001. ,
DOI : 10.1038/16891
A method to determine the macroscopic toughness scatter of brittle materials, International Journal of Fracture, vol.125, issue.1, pp.171-187, 2004. ,
DOI : 10.1023/B:FRAC.0000021076.76987.62
URL : https://hal.archives-ouvertes.fr/hal-00002912
Dynamic fracture mechanics, 1990. ,
Rate-dependent mode I interlaminar crack growth mechanisms in graphite/epoxy and graphite/PEEK, Composites Science and Technology, vol.28, issue.1, pp.1-15, 1987. ,
DOI : 10.1016/0266-3538(87)90058-3
Strain???energy effects on dynamic fragmentation, Journal of Applied Physics, vol.59, issue.4, pp.1379-1380, 1986. ,
DOI : 10.1063/1.336532
A statistics and energy based theory of dynamic fragmentation, International Journal of Impact Engineering, vol.29, issue.1-10, pp.293-306, 2003. ,
DOI : 10.1016/j.ijimpeng.2003.09.026
Impact fragmentation of high-velocity compact projectiles on thin plates: a physical and statistical characterization of fragment debris, International Journal of Impact Engineering, vol.26, issue.1-10, pp.249-262, 2001. ,
DOI : 10.1016/S0734-743X(01)00085-9
A Method for Crash Tests on Laminated Composite Scaled-Down Models, Applied Composite Materials, vol.12, issue.6, pp.355-368, 2005. ,
DOI : 10.1007/s10443-005-4538-0
The theory of rupture, 1st International Congress of Applied Mechanics, pp.55-63, 1924. ,
Dynamic crack propagation under mixed-mode loading ??? Comparison between experiments and X-FEM simulations, International Journal of Solids and Structures, vol.44, issue.20, pp.6517-6534, 2007. ,
DOI : 10.1016/j.ijsolstr.2007.02.044
A multiscale extended finite element method for crack propagation, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.5, pp.381-399, 2007. ,
DOI : 10.1016/j.cma.2007.07.023
Quasi-static and dynamic interlaminar identification campaign and speed crack effect understanding in t700, 2007. ,
Statistical Energy and Failure Analysis of CFRP Compression Behavior Using a Uniaxial Microbuckling Model, Journal of Composite Materials, vol.31, issue.20, pp.2807-2828, 2007. ,
DOI : 10.1177/0021998307079980
Dynamic Mode-I crack-propagation in a carbon/epoxy composite, Composites Science and Technology, vol.58, issue.9, pp.1405-1410, 1998. ,
DOI : 10.1016/S0266-3538(98)00025-6
Compression Failure Mechanisms of Single-Ply, Unidirectional , Carbon-Fiber Composites, SAMPE Quarterly, vol.23, issue.29, 1992. ,
Crushing mechanism of carbon fibre/PEEK composite tubes, Composites, vol.26, issue.11, pp.749-755, 1995. ,
DOI : 10.1016/0010-4361(95)98195-Q
Energy Absorption Behavior of Graphite Epoxy Composite Sine Webs, Journal of Composite Materials, vol.23, issue.5, pp.448-458, 1989. ,
DOI : 10.1177/002199838902300502
High Strain Rate Responses and Failure Analysis in Polymer Matrix Composites - An Experimental and Finite Element Study, Journal of Composite Materials, vol.39, issue.5, pp.423-450, 2005. ,
DOI : 10.1177/0021998305047094
Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, issue.2, pp.329-334, 1980. ,
DOI : 10.1115/1.3153664
Analysis of cracked laminates: a variational approach, Mechanics of Materials, vol.4, issue.2, pp.121-136, 1985. ,
DOI : 10.1016/0167-6636(85)90011-0
On the probabilistic???deterministic transition involved in a fragmentation process of brittle materials, Computers & Structures, vol.81, issue.12, pp.1241-1253, 2003. ,
DOI : 10.1016/S0045-7949(03)00039-7
URL : https://hal.archives-ouvertes.fr/hal-00002910
A further assessment of the predictive capabilities of current failure theories for composite laminates: comparison with experimental evidence, Composites Science and Technology, vol.64, issue.3-4, pp.549-588, 2004. ,
DOI : 10.1016/S0266-3538(03)00227-6
Failure criteria in fiber-reinforced polymer composites : the World WIde Failure Exercise, 2004. ,
Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure, Composites Science and Technology, vol.61, issue.2, pp.221-230, 2001. ,
DOI : 10.1016/S0266-3538(00)00199-8
Effects of fibre bridging on GIC of a unidirectional glass/epoxy composite, Composites Science and Technology, vol.35, issue.3, pp.283-299, 1989. ,
DOI : 10.1016/0266-3538(89)90040-7
Analyse de l'endommagement dans des stratifiés carbone/epoxy soumisàsoumisà un chargement de tractionà tractionà vitessé elevèe, Comptes-Rendus des 13èmes Journées Nationales Composites , JNC13, AMAC, pp.513-521, 2003. ,
TénacitéTénacitéà la rupture interlaminaire en mode 1 d'un stratifié unidirectionnel carbone/´ epoxy soumisàsoumisà un chargementàchargementà vitessé elevée Space-time finite element methods for elastodynamics : Formulations and error estimates, Computional Methods for Applied Mechanics and Engineering, vol.66, pp.339-363, 1988. ,
Space-time finite element methods for second-order hyperbolic equations, Computer Methods in Applied Mechanics and Engineering, vol.84, issue.3, pp.327-348, 1990. ,
DOI : 10.1016/0045-7825(90)90082-W
A unified approach to progressive crushing of fibre-reinforced composite tubes, Composites Science and Technology, vol.40, issue.4, pp.377-421, 1991. ,
DOI : 10.1016/0266-3538(91)90031-J
Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics, vol.24, issue.3, pp.361-364, 1957. ,
A device for utilising the DCB test geometry at intermediate opening velocities, Le Journal de Physique IV, vol.10, issue.PR9, pp.249-254, 2000. ,
DOI : 10.1051/jp4:2000942
Impact and crash modelling of composite structures : a challenge for damage mechanics, Proceedings of the Euro- Pam User conference Kachanov L (1958) On creep rupture time. In : Proc. Acad. Sci, 1999. ,
Advanced fracture mechanics Measurements and prediction of the compression-after-impact strength of glass knitted textile composites, Composites Part A, vol.35, pp.145-157, 1985. ,
Rate dependence of mode I fracture behaviour in carbon-fibre/epoxy composite laminates, Composites Science and Technology, vol.58, issue.3-4, pp.591-602, 1998. ,
DOI : 10.1016/S0266-3538(97)00176-0
Aspects of the Failure and Postfailure of Fiber Composites in Compression, Journal of Composite Materials, vol.32, issue.20, pp.2000-2037, 1997. ,
DOI : 10.1177/002199839703102001
On the compressive failure of fiber reinforced composites, International Journal of Solids and Structures, vol.32, issue.6-7, pp.689-738, 1995. ,
DOI : 10.1016/0020-7683(94)00157-R
Sur la mécanique de l'endommagement des composites, Comptes-rendus des JNC5, pp.667-683, 1986. ,
A damage computational method for composite structures, Computers & Structures, vol.44, issue.1-2, pp.79-87, 1992. ,
DOI : 10.1016/0045-7949(92)90226-P
Damage modelling of the elementary ply for laminated composites, Composites Science and Technology, vol.43, issue.3, pp.257-267, 1992. ,
DOI : 10.1016/0266-3538(92)90097-M
An enhanced mesomodel for laminates based on micromechanics, Composites Science and Technology, vol.62, issue.4, pp.533-541, 2002. ,
DOI : 10.1016/S0266-3538(01)00145-2
Pont entre les ?? micro ?? et ?? m??so ?? m??caniques des composites stratifi??s, Comptes Rendus M??canique, vol.331, issue.8, pp.537-544, 2003. ,
DOI : 10.1016/S1631-0721(03)00130-X
Towards a bridge between the micro- and mesomechanics of delamination for laminated composites, Composites Science and Technology, vol.66, issue.6, pp.698-712, 2006. ,
DOI : 10.1016/j.compscitech.2004.12.026
Dynamic crack initiation and growth in thick unidirectional graphite/epoxy plates, Composites Science and Technology, vol.57, issue.1, pp.55-65, 1997. ,
DOI : 10.1016/S0266-3538(96)00110-8
Thickness effect on the compressive strength of T800/924C carbon fibre???epoxy laminates, Composites Part A: Applied Science and Manufacturing, vol.36, issue.2, pp.213-227, 2005. ,
DOI : 10.1016/S1359-835X(04)00158-7
Compressive response and failure of fiber reinforced unidirectional composites, International Journal of Fracture, vol.100, issue.3, pp.275-306, 1999. ,
DOI : 10.1023/A:1018779307931
Compressive splitting response of glass-fiber reinforced unidirectional composites, Composites Science and Technology, vol.60, issue.16, pp.2957-2966, 2000. ,
DOI : 10.1016/S0266-3538(00)00159-7
Interface crack tip singularity with contact and friction. Comptes-rendus de l'Académie des Sciences, pp.437-442, 1999. ,
Strength or toughness? A criterion for crack onset at a notch, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.61-72, 2002. ,
DOI : 10.1016/S0997-7538(01)01184-6
The onset of delamination at stress-free edges in angle-ply laminates????? analysis of two criteria, Composites Science and Technology, vol.61, issue.3, pp.377-382, 2001. ,
DOI : 10.1016/S0266-3538(00)00105-6
Construction of a micromechanics-based intralaminar mesomodel, and illustrations in ABAQUS/Standard, Computational Materials Science, vol.43, issue.1, pp.137-145, 2008. ,
DOI : 10.1016/j.commatsci.2007.07.050
Analyse de la tenue au délaminage des composites stratifiés : identification d'un modèle d'interface interlaminaire Analytical modelling of the static and dynamic axial collapse of thin-walled fibreglass composite conical shells, International Journal of Impact Engineering, vol.19, pp.5-6477, 1997. ,
On the experimental investigation of crash energy absorption in laminate splaying collapse mode of FRP tubular components, Composite Structures, vol.70, issue.4, pp.413-429, 2005. ,
DOI : 10.1016/j.compstruct.2004.09.002
The static and dynamic axial collapse of CFRP square tubes: Finite element modelling, Composite Structures, vol.74, issue.2, pp.213-225, 2006. ,
DOI : 10.1016/j.compstruct.2005.04.006
The partition of unity finite element method: Basic theory and applications, Computer Methods in Applied Mechanics and Engineering, vol.139, issue.1-4, pp.289-314, 1996. ,
DOI : 10.1016/S0045-7825(96)01087-0
A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering, vol.46, issue.1, pp.131-150, 1999. ,
DOI : 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.3.CO;2-A
Compression Characterization of High-modulus Carbon Fibers, Journal of Composite Materials, vol.39, issue.1, pp.35-49, 2005. ,
DOI : 10.1177/0021998305046433
URL : https://hal.archives-ouvertes.fr/hal-00088202
Incubation time based testing of materials, European Journal of Mechanics - A/Solids, vol.25, issue.4, pp.670-676, 2006. ,
DOI : 10.1016/j.euromechsol.2006.05.005
Mechanisms of kink-band formation in graphite/epoxy composites a micromechanical experimental study, Composites Science and Technology, vol.59, issue.15, pp.2201-2213, 1999. ,
DOI : 10.1016/S0266-3538(99)00074-3
Material rate dependence and mesh sensitivity in localization problems, Computer Methods in Applied Mechanics and Engineering, vol.67, issue.1, pp.69-85, 1988. ,
DOI : 10.1016/0045-7825(88)90069-2
Application of the CRE for parameter identification in non-linear dynamics with corrupted measurements Failure mode transition in unidirectional E-glass/Vinylester composites under multiaxial compression, 7th World Congress on Computational Mechanics, pp.2081-2097, 2000. ,
MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 1: FUNDAMENTALS, International Journal for Numerical Methods in Engineering, vol.7, issue.21, pp.3575-3623, 1996. ,
DOI : 10.1002/(SICI)1097-0207(19961115)39:21<3575::AID-NME65>3.0.CO;2-E
On the dicrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations, International Journal of Solids and Structures, vol.37, pp.7507-7229, 2000. ,
Analysis of geometric imperfections in fibres for unidirectional fibre reinforced composites, La Recherche Aéronautique, vol.6, pp.431-448, 1994. ,
Analyse des imperfections géométriques dans les matériaux compositesàcompositesà renfort unidirectionnel :Premì ere et Deuxì eme parties. Rapports ONERA-IMFL n o 92, pp.47-9335, 1992. ,
An Efficient Adaptive Procedure for Three-Dimensional Fragmentation Simulations, Engineering with Computers, vol.18, issue.2, pp.148-159, 2002. ,
DOI : 10.1007/s003660200013
Constrained cracking in glass fibre-reinforced epoxy cross-ply laminates, Journal of Materials Science, vol.8, issue.1, pp.195-201, 1978. ,
DOI : 10.1007/BF00739291
Modélisation du comportement dynamique des structures composites : Synthèse, 2005. ,
Some issues on modelling and simulation of crash absorbers, CDCM06 -Conference on Damage in Composite Materials : Simulation and Non-Destructive Testing, 2006. ,
Digital image correlation and biaxial test on composite material for anisotropic damage law identification, International Journal of Solids and Structures, vol.46, issue.11-12, pp.2388-2396, 2009. ,
DOI : 10.1016/j.ijsolstr.2009.01.025
Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity, 2005. ,
Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development, Composites Part A: Applied Science and Manufacturing, vol.37, issue.1, pp.63-73, 2006. ,
DOI : 10.1016/j.compositesa.2005.04.016
Measuring the fracture toughness for different failure modes in laminated composites Failure analysis of FRP laminates by means of physically based phenomenological models, Proceedings of the Conference CompTest, pp.1633-1662, 2002. ,
An interface element formulation for the simulation of delamination with buckling, Engineering Fracture Mechanics, vol.68, issue.16, pp.1755-1776, 2001. ,
DOI : 10.1016/S0013-7944(01)00052-2
Numerical methods for frictional contact problems and applications, Journal de Mécanique Théorique et Appliquée , Numéro spécial, vol.1, issue.7, pp.111-128, 1988. ,
Dynamic Fracture, 2004. ,
DOI : 10.1016/B0-08-043749-4/02120-0
URL : https://hal.archives-ouvertes.fr/hal-01305640
An experimental investigation into dynamic fracture: II. Microstructural aspects, International Journal of Fracture, vol.20, issue.1, pp.65-80, 1984. ,
DOI : 10.1007/BF01152313
Modélisation de la fissuration transverse dans les matériaux composites carbone/résine In : Groupe de réflexion sur l'endommagement , Cetim Méthodé eléments finisétendusfinisétendus en espace et en temps : applicationàapplicationà la propagation dynamique des fissures A path independant integral and approximate analysis of strain concentration by notches and cracks, Senlis Réthoré J Journal of Applied Mechanics, vol.35, pp.379-386, 1968. ,
An incremental approach to the solution of snapping and buckling problems, International Journal of Solids and Structures, vol.15, issue.7, pp.529-551, 1979. ,
DOI : 10.1016/0020-7683(79)90081-7
Cracks Faster than the Shear Wave Speed, Science, vol.284, issue.5418, pp.1337-1340, 1999. ,
DOI : 10.1126/science.284.5418.1337
Mechanics of composites strenghtening, Composite Materials , ASME, Metals Park pp, pp.37-75, 1965. ,
Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches, International Journal of Fracture, vol.40, issue.1, pp.141-157, 2006. ,
DOI : 10.1007/s10704-006-6631-2
URL : https://hal.archives-ouvertes.fr/hal-00013818
Energy absorption of braiding pultrusion process composite rods, Composite Structures, vol.55, issue.4, pp.407-417, 2002. ,
DOI : 10.1016/S0263-8223(01)00160-X
Subsonic and intersonic shear rupture of weak planes with a velocity weakening cohesive zone, Journal of Geophysical Research, vol.88, issue.46, pp.1-32, 2002. ,
DOI : 10.1029/2001JB000460
A non-linear finite element approach for the analysis of mode-I free edge delamination in composites, International Journal of Solids and Structures, vol.30, issue.9, pp.1239-1253, 1993. ,
DOI : 10.1016/0020-7683(93)90014-X
Disorder effects in dynamic fragmentation of brittle materials, Journal of the Mechanics and Physics of Solids, vol.51, issue.11-12, pp.2023-2035, 2003. ,
DOI : 10.1016/j.jmps.2003.09.010
On cracks in rectilinearly anisotropic bodies, International Journal of Fracture Mechanics, vol.1, issue.3, pp.189-203, 1965. ,
DOI : 10.1007/BF00186854
Microbuckle propagation in a unidirectional carbon fibre-epoxy matrix composite, Acta Materialia, vol.44, issue.7, pp.2581-2590, 1996. ,
DOI : 10.1016/1359-6454(95)00410-6
Dynamic compressive failure of fiber composites, Journal of the Mechanics and Physics of Solids, vol.44, issue.11, pp.1867-1890, 1996. ,
DOI : 10.1016/0022-5096(96)00050-6
Rate Effects on Mode I Interlaminar Fracture Toughness in Composite Materials, Journal of Composite Materials, vol.24, issue.7, pp.670-687, 1987. ,
DOI : 10.1177/002199838702100706
Etude du couplage thermomécanique dans la propagation dynamique de fissure A method for predicting the fracture toughness of cfrp laminates failing by fibre microbuckling, Composites : Part A, vol.31, pp.733-740, 2000. ,
The design and analysis of the Generalized Finite Element Method, Computer Methods in Applied Mechanics and Engineering, vol.181, issue.1-3, pp.43-69, 2000. ,
DOI : 10.1016/S0045-7825(99)00072-9
Modèle d'endommagementàendommagementà effet retard, ´ etude numérique et analytique de l'´ evolution, 2002. ,
Microbuckle propagation in fibre composites, Acta Materialia, vol.45, issue.3, 1997. ,
DOI : 10.1016/S1359-6454(96)00240-6
Determination of displacements using an improved digital correlation method, Image and Vision Computing, vol.1, issue.3, pp.131-139, 1983. ,
DOI : 10.1016/0262-8856(83)90064-1
Application of an optimized digital correlation method to planar deformation analysis, Image and Vision Computing, vol.4, issue.3, pp.143-150, 1986. ,
DOI : 10.1016/0262-8856(86)90057-0
Propagation des délaminages sous chargement dynamique : conception des dispositifs expérimentaux pour les modes I et II de la mécanique de la rupture, pp.2004-27034, 2004. ,
A space-time finite element method for structural acoustics in infinite domains part 1: Formulation, stability and convergence, Computer Methods in Applied Mechanics and Engineering, vol.132, issue.3-4, pp.195-258, 1996. ,
DOI : 10.1016/0045-7825(95)00955-8
On the Comparison Between Microscopic and Macroscopic Instability Mechanisms in a Class of Fiber-Reinforced Composites, Journal of Applied Mechanics, vol.52, issue.4, pp.794-800, 1985. ,
DOI : 10.1115/1.3169148
Dynamic delamination fracture toughness in unidirectional polymeric composites, Composites Science and Technology, vol.61, issue.1, pp.87-94, 2001. ,
DOI : 10.1016/S0266-3538(00)00197-4
A General Theory of Strength for Anisotropic Materials, Journal of Composite Materials, vol.5, issue.1, pp.58-80, 1971. ,
DOI : 10.1177/002199837100500106
An engineering solution for using coarse meshes in the simulation of delamination with cohesive zone models, 2005. ,
Compressive performance of carbon fibres: experiment and analysis, Composites Science and Technology, vol.58, issue.10, pp.1649-1658, 1998. ,
DOI : 10.1016/S0266-3538(97)00235-2
Une stratégie de calcul pour l'analysè a l'´ echelle " micro " des endommagements jusqu'` a rupture des composites stratifiés, 2007. ,
On the initiation and growth of kink bands in fiber composites: Part I. experiments, International Journal of Solids and Structures, vol.38, issue.15, pp.2639-2651, 2001. ,
DOI : 10.1016/S0020-7683(00)00174-8
Composite failure under combined compression and shear, International Journal of Solids and Structures, vol.37, issue.12, pp.1765-1791, 2000. ,
DOI : 10.1016/S0020-7683(98)00323-0
On the initiation and growth of kink bands in fiber composites. Part II: analysis, International Journal of Solids and Structures, vol.38, issue.15, pp.2653-2682, 2001. ,
DOI : 10.1016/S0020-7683(00)00175-X
A new finite element for free edge effect analysis in laminated composites, Computers and Structures, vol.84, pp.1538-1546, 2006. ,
Failure mode transition and energy dissipation in naturally occurring composites, Composites Part B: Engineering, vol.35, issue.6-8, pp.639-646, 2004. ,
DOI : 10.1016/j.compositesb.2004.04.010
Numerical simulations of fast crack growth in brittle solids, Journal of the Mechanics and Physics of Solids, vol.42, issue.9, pp.1397-1434, 1994. ,
DOI : 10.1016/0022-5096(94)90003-5
Height-Tapered Double Cantilever Beam Specimen for Study of Rate Effects on Fracture Toughness of Composites, Composite Materials : Testing and Design, ASTM STP 972, pp.241-258, 1988. ,
DOI : 10.1520/STP26139S
Compressive failure mechanism and impact behaviour of unidirectional carbon-fiber/vinyl ester composites, Journal of Composite Materials, vol.35, issue.16, pp.1470-1490, 2001. ,
Measurement of small angle fiber misalignments in continuous fiber composites, Composites Science and Technology, vol.30, issue.4, pp.279-293, 1987. ,
DOI : 10.1016/0266-3538(87)90016-9
Stochastic fracture of ceramics under dynamic tensile loading, International Journal of Solids and Structures, vol.41, issue.22-23, pp.6573-6596, 2004. ,
DOI : 10.1016/j.ijsolstr.2004.05.029
A cohesive model based fragmentation analysis: effects of strain rate and initial defects distribution, International Journal of Solids and Structures, vol.42, issue.18-19, pp.18-195181, 2005. ,
DOI : 10.1016/j.ijsolstr.2005.02.009
A rate-dependent cohesive model for simulating dynamic crack propagation in brittle materials, Engineering Fracture Mechanics, vol.72, issue.9, pp.1383-1410, 2005. ,
DOI : 10.1016/j.engfracmech.2004.10.011