K. and I. Trans, Mechanical Forces between Electric Current and Saturated Magnetic Fields, pp.563-569, 1927.

A. Baffrey, Les convertisseurs rotatifs à moyenne fréquence, pp.11-904, 1965.

A. J. Cruickshank and R. W. Menzies, Axially laminated anisotropic rotors for reluctance motors, Proceedings of the Institution of Electrical Engineers, vol.113, issue.12, pp.2058-2060, 1966.
DOI : 10.1049/piee.1966.0358

C. Rioux and R. G. Mai, Théorie générale comparative des machines électriques établie à partir des équations du champ électromagnétique, pp.5-415, 1970.

P. Heiny, R. Naudy, and L. Martel, Technologie d'électricité, tome 5, premier livre : Machines électriques -Traction électrique -Générateurs électrochimiques, pp.104-111, 1967.

S. A. Nasar, D.C.-switched reluctance motor, Proc. IEE, pp.1048-1049, 1969.
DOI : 10.1049/piee.1969.0194
URL : https://hal.archives-ouvertes.fr/hal-00010861

H. R. Harris, P. A. Bolton, J. V. Ward, G. B. Byrne, J. Smith et al., École Normale Supérieure de Cachan et à celle du Conservatoire National des Arts et Métiers à Paris, d'autres font partie de ma bibliothèque personnelle ou m'ont été prêtés par des collègues ou amis que je remercie ici. 7-BIBLIOGRAPHIE [1] M, Certains de ces ouvrages peuvent être consultés à la bibliothèque de l

N. N. Stephenson, . Fulton, and . Georges, Discussion on variable-speed switched reluctance motorsTout par l'électricité, MAME et fils éditeurs, pp.260-276, 1981.

]. B. Multon and C. Glaize, Optimisation du dimensionnement des alimentations des machines ?? r??luctance variable, Revue de Physique Appliqu??e, vol.22, issue.5
DOI : 10.1051/rphysap:01987002205033900

]. B. Multon, M. B. Gabsi, D. Multon, J. M. Bonot, . J. Hube-]-p et al., Size Power Ratio Optimization for the Converters of Switched Reluctance MotorsInfluence de l'entrefer sur les performances et le dimensionnement d'un moteur à réluctance variable à double saillance et de son onduleur" 7 éme coll. internat. sur les moteurs pour le positionnement incrémentalConception d'un moteur à réluctance autocommuté alimenté en courant". 6 éme col. internat. sur les moteurs pour le positionnement incrémentalVariable-Speed Switched Reluctance Motors, IMACS'TC1, pp.339-357134, 1980.

T. J. Miller, Brushless Permanent-Magnet and Reluctance Motor Drives, 1989.

]. B. Multon, S. Hassine, J. Y. Lechenadecuniversité, P. Xi, E. N. De et al., Pole Arcs Optimization of Vernier Reluctance Motors Supplied with Square Wave CurrentElectric Machines and Power Systems N°6. [12] S. HASSINE "Optimisation des paramètres de commande en tension des machines à réluctance variable autopilotées en régime permanentMinimum Airgap-Permeance Data for the Doubly-Slotted Pole Structures Common in Variable-Reluctance- Motors". proc, IEEE IAS, vol.21, issue.11, pp.196-200, 1990.

]. B. Multon, M. Geoffroy, P. F. Desesquelles-c, and . Stephens, Variable reluctance rotating shaft sensor for DC brushless vernier reluctance motor" first congres Japanese-French of MECATRONICSFault detection and management system for fault tolerant switched reluctance motor drives, IEEE, Trans. on IA, vol.27, pp.61098-1102, 1991.

]. S. Vukosavic and V. R. Stephanovic, SRM inverter topologies : a comparative evaluation
DOI : 10.1109/28.108453

S. A. Nasar, I. Boldea, and L. , UNNEWEHR Permanent Magnet, Reluctance and Self-Synchronous Motors, 1993.

R. J. Blake and P. J. Lawrenson, New Applications of Very Large and Small Switched Reluctance Drives, 1992.

]. E. Richter, Switched Reluctance Machines for High Performance Operations in Harsh Environment -A Review Paper, pp.18-24, 1990.

]. D. Torrey, A Comparison Between a Bifilar and a Monofilar High -Power Variable Reluctance Motor Drive, pp.60-65, 1990.

A. V. Radun, High Power Density Switched Reluctance Motor Drive for Aerospace Applications, IEEE Trans.I.A, vol.28, pp.1113-119, 1992.

A. R. Miles, Design of a 5 MW, 9000 V switched reluctance motor, IEEE Transactions on Energy Conversion, vol.6, issue.3, pp.3484-491, 1991.
DOI : 10.1109/60.84325

C. H. Ahn, Y. J. Kim, and M. G. Allen, A Planar Variable Reluctance Magnetic Micromotor with Fully Integrated Stator and Wrapped Coils" Conf, Proc, pp.1-6, 1993.

S. Vukosavic and V. R. Stephanovic, SRM Inverter Topologies : a Comparative Evaluation, IEEE, IAS Meet. IEEE Trans. I.A, vol.27, pp.946-958, 1990.
DOI : 10.1109/28.108453

P. J. Lawrenson, A Brief Status Review of Switched Reluctance Drives, EPE Journal, vol.2, issue.3, pp.133-144, 1992.
DOI : 10.1080/09398368.1992.11463293

C. Pollock and B. W. Williams, A Unipolar Converter for a Switched Reluctance Motor, IEEE on I.A, vol.26, issue.2, pp.222-228, 1990.

C. Pollock and B. W. Williams, Power convertor circuits for switched reluctance motors with the minimum number of switches, IEE Proceedings B Electric Power Applications, vol.137, issue.6, pp.373-384, 1990.
DOI : 10.1049/ip-b.1990.0046

D. S. Schramm, B. W. Williams, and T. C. Green, A New Switched Reluctance Motor Drive Configuration" EPE'91, pp.394-397

A. M. Hava, V. Blasko, and T. A. Lipo, A Modified C-Dump Converter for Variable Reluctance Machines, IEEE Trans. on I.A, vol.28, pp.51017-1022, 1992.

H. Le-huy, P. Viarouge, and B. Francoeur, A Novel Unipolar Converter for Switched Reluctance Motor" PESC'89, pp.3-10

H. Le-huy, K. Slimani, and P. Viarouge, A Current Controlled Quasi-Resonant Converter for Switched Reluctance Motor

S. S. Park and T. A. Lipo, New series resonant converter for variable reluctance motor drive, PESC `92 Record. 23rd Annual IEEE Power Electronics Specialists Conference, pp.833-838
DOI : 10.1109/PESC.1992.254797

]. M. Oljaca and J. Corda, An Investigation of Control of Switched Reluctance Motor Supplied by AC Pulses" EPE'91, pp.404-406

M. Moallem and C. M. Ong, Predicting the Steady-State Performance of a Switched Reluctance Machine, IEEE Trans. on I.A, vol.27, issue.6, pp.1087-1097, 1991.

J. C. Moreira and T. A. Lipo, Simulation of a Four Phase Switched Reluctance Motor Including the Efeects of Mutual Coupling" Electric Machines and Power Systems 16, pp.281-289, 1989.

M. Moallem, C. M. Ong, and L. E. Unnewehr, Effect of Rotor Profiles on the Torque of a Switched Reluctance Motor

L. E. Unnewehr, Series-commutated SCR controllers for variable-speed reluctance motor drives, 1973 IEEE Power Electronics Specialists Conference, pp.180-191
DOI : 10.1109/PESC.1973.7065187

L. E. Unnewehr and W. H. Koch, An Axial Air-gap Reluctance Motor for Variable Speed Applications, IEEE PAS, vol.93, pp.1367-374, 1974.

L. E. Unnewehr, Magnetic Circuit Studies for an Axial Air-Gap Reluctance Motor" Electric Machines and Electromechanics, pp.57-69

J. P. Bastos, R. Goyet, and J. Lucidarme, Performances intrins??ques des machines ?? r??luctance variable ?? disques imbriqu??s, Revue de Physique Appliqu??e, vol.15, issue.1, pp.45-54, 1980.
DOI : 10.1051/rphysap:0198000150104500
URL : https://hal.archives-ouvertes.fr/jpa-00244697/document

J. P. Bastos, R. Goyet, J. Lucidarme, G. Quichaud, and F. Rioux-damidaux, Performances of a Multidisk Variable Reluctance Machine, ICEM, vol.82, pp.254-257

V. R. Dinov and . Lazarov, Variable Reluctance Motor with a Disc Rotor with Electronic Commutation, pp.1215-1223, 1980.

Y. Takeda, S. Ishikawa, T. Hirasa, and H. Takechi, High Torque Variable Reluctance Motor with an Axial Construction for Direct Drives, ICEM, vol.88, pp.521-524

D. Matt, R. Goyet, J. Lucidarme, and C. Rioux, Longitudinal Field Multi-Airgap Linear Reluctance Actuator" Electric Machines & Power systems, pp.299-313, 1987.

S. Chatratana, H. R. Bolton, and D. A. Pedder, Investigations into Small Single-Phase Switched Reluctance Motors

T. Fukao, A. Chiba, and M. Matsui, Test results on a super-high-speed amorphous-iron reluctance motor, IEEE Transactions on Industry Applications, vol.25, issue.1, pp.119-125, 1989.
DOI : 10.1109/28.18881

]. S. Nakada and M. Hisatani, Experimental Study of Super High Speed Reluctance Motor Using Amorphous Iron Cores Revue Japonaise, en japonais, 1991.

]. M. Crivii and M. Jufer, Synchronous Reluctance Motor Design, with Saturation and Iron Losses Effects

T. J. Miller and K. Debebe, Design of a Synchronous Reluctance Motor" MOTOR-CON, pp.69-83

T. J. Miller, A. Hutton, C. Cossar, and D. A. Staton, Design of a Synchronous Reluctance Motor Drive

T. A. Lipo, Synchronous Reluctance machines ? A Viable Alternative for AC Drives ? Electric Machines & Power Systems, pp.659-671, 191991.

M. J. Kamper, Four-Quadrant Control of a 20 W Switched Reluctance Motor Drive for Near Servo Applications, pp.1-386

]. A. Mailfert, Machines à réluctance variable" Techniques de l'Ingénieur, traité de Génie Electrique, pp.3-1986

A. Mailfert, A. Rezzoug, and P. Manfe, Supersat : une nouvelle classe de machines supraconductrices" Revue Générale de l'Electricité, pp.627-631, 1984.

R. D. Bedford, Compatible Brushless Reluctance Motors and Controlled Switch Circuits, U.S. Patent N°, vol.3679953, 1972.

J. V. Byrne and J. G. Lacy, Characteristics of Saturable Stepper and Reluctance Motors" IEE Conf.on Small Elect, pp.93-96, 1976.

]. V. Török and K. Loreth, The World's Simplest Motor For Variable Speed Control ? The Cyrano Motor, a PM-Biased SR-Motor of High Torque Density, pp.13-1644, 1993.

H. C. Lovatt and J. M. Stephenson, Influence of number of poles per phase in switched reluctance motors, IEE Proceedings B Electric Power Applications, vol.139, issue.4, pp.307-314, 1992.
DOI : 10.1049/ip-b.1992.0037

]. C. De and . Silva, Design Equations for the Tooth Distribution of Stepping Motors

J. Chai, R. Yao, and P. Chen, Principles for Switched Reluctance Motor Design" SM 100, Part II, pp.27-29445, 1991.

J. W. Finch, M. R. Harris, H. B. Metwally, and A. Musoke, Switched Reluctance Motors with Multiple Teeth per Pole : Philosophy of Design, IEE second Int. Conf. on Electric Machines and Drives, pp.134-138, 1985.

E. J. Gudefin, F. M. Sargos, and P. Zaskalicky, Machines à réluctance variable à stator dissymétrique Journées sur les moteurs pas à pas, pp.21-32, 1992.

J. R. Hendershot, Brushless D.C. Motors without Permanent Magnets

B. C. Mecrow, New Winding Configurations for Doubly Salient Reluctance Machines" IAS Conf, pp.249-256, 1992.

D. A. Philips, A Novel High Performance -Low Noise Switched Reluctance Motor, ICEM 90, vol.3, pp.801-805

L. Xu, T. A. Lipo, and S. C. Rao, Analysis of a new variable-speed singly salient reluctance motor utilizing only two transistor switches, IEEE Transactions on Industry Applications, vol.26, issue.2, pp.229-236, 1990.
DOI : 10.1109/28.54247

R. M. Davis, Variable reluctance rotor structures-their influence on torque production, IEEE Transactions on Industrial Electronics, vol.39, issue.2, pp.168-174, 1992.
DOI : 10.1109/41.166738

F. Liang, Y. Liao, and T. A. Lipo, A new variable reluctance motor utilizing an auxiliary commutation winding, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting, pp.219-225, 1992.
DOI : 10.1109/IAS.1992.244291

]. Y. Liao and T. A. Lipo, A NEW DOUBLY SALIENT PERMANENT MAGNET MOTOR FOR ADJUSTABLE SPEED DRIVES, Electric Machines & Power Systems, vol.89, issue.2, pp.415-420, 1992.
DOI : 10.1109/PESC.1989.48537

]. Y. Liao and T. A. Lipo, Sizing and Optimal Design of Doubly Salient Permanent Magnet Motors, 6th Conf. on Electric Motors and Drives, pp.452-456, 1993.

A. G. Tristam, The Development of a Range of General-Purpose Industrial SR Drives for 4 kW to 75 kW, Proc. PCIM Conf, pp.80-87, 1990.

C. Patak, R. M. Davis, L. Xu, T. A. Lipo, and S. Rao, Discussion ofAnalysis of a New Variable-Speed Singly Salient Reluctance Motor Utilizing Only Two Transistor Switches

A. Hava, J. B. Wacknov, and T. A. Lipo, New ZCS resonant power converter topologies for variable reluctance machine drives, Proceedings of IEEE Power Electronics Specialist Conference, PESC '93, pp.432-439, 1993.
DOI : 10.1109/PESC.1993.471966

M. R. Harris, J. W. Finch, J. A. Mallick, and T. J. Miller, A Review of the Integral-Horsepower Switched Reluctance Motor Drive, IEEE Transactions on Industry Applications, issue.4, pp.716-721, 1986.

J. Faucher, M. Lajoie-mazenc, and A. Chayegani, Characterization of a Closed-Loop Controlled Current-Fed Reluctance Machine Taking into Account Saturation, IA-15 n°5, pp.482-488
DOI : 10.1109/TIA.1979.4503695

E. Fechine, C. Goeldel, and A. Mailfert, Step by Step Feeding of a New Hybrid Motor with Segmented Stator Magnet" MOTORCON, pp.99-110, 1982.

J. M. Kauffmann and E. Gudefin, Moteurs pas à pas à réluctance variable RGE 3Contribution à l'étude des machines à réluctance variable à commutation électronique, Thèse d'Etat, I.N.P.Toulouse (26 Juin, 1981.

C. Glaize, Etude générale et optimisation des modes d'alimentation des machines à réluctance variable. Application aux machines polydiscoïdes, Thèse d'Etat, 1983.

J. P. Bastos, L'utilisation de plots de forme trap??zo??dale dans les machines ?? reluctance variable, Revue de Physique Appliqu??e, vol.17, issue.10
DOI : 10.1051/rphysap:019820017010069300

R. Goyet and C. A. Bleijs, Experimental Study of an Elementary Interleaved Disk Reluctance Motor, ICEM, vol.809, pp.427-434

J. Nuta, C. A. Bleijs, C. Glaize, and R. Goyet, TESTS OF AN AXIAL AIR-GAP VARIABLE RELUCTANCE MOTOR SUPPLIED BY A SOLID-STATE CONVERTER, Electric Machines & Power Systems, vol.15, issue.1, pp.361-373, 1981.
DOI : 10.1080/03616968108960076

]. R. Goyet, Contribution à l'étude des machines à réluctance variable à disques imbriqués" Thèse d'Etat Paris VI, 23 juin, 1981.

J. P. Bastos, R. Goyet, J. Lucidarme, G. Quichaud, and F. Rioux-damidaux, Performances of a Multidisk Variable Reluctance Machine, ICEM, vol.82, pp.254-257

P. F. Desesquelles, Contribution à l'étude de l'alimentation des machines à réluctance variable. Simulation numérique de trois ensembles machine-convertisseur, Thèse de 3 Cycle, 1983.

S. Allano and C. Glaize, Reluctance Machine Supplied with Thyristors Converter, ICEM, vol.82, pp.579-582

]. C. Glaize, Recherche des formes optimales d'alimentation des machines ?? r??luctance variable, Revue de Physique Appliqu??e, vol.20, issue.11
DOI : 10.1051/rphysap:019850020011077900

P. J. Lawrenson, J. M. Stephenson, P. T. Blenkinsop, J. Corda, and N. N. Fulton, Variable-speed switched reluctance motors, IEE Proceedings B Electric Power Applications, vol.127, issue.4, pp.253-265, 1980.
DOI : 10.1049/ip-b.1980.0034

M. R. Harris, H. R. Bolton, P. A. Ward, J. V. Byrne, G. B. Smith et al., Discussion on Variable Speed Switched Reluctance Motors, proc.IEE, vol.128, pp.260-276, 1981.

R. M. Davis, W. F. Ray, and R. J. Blake, An Inverter Drive for a Switched Reluctance Motor" I, pp.1207-1214, 1980.

R. M. Davis, W. F. Ray, and R. J. Blake, Inverter drive for switched reluctance motor: circuits and component ratings, IEE Proceedings B Electric Power Applications, vol.128, issue.2, pp.126-136, 1981.
DOI : 10.1049/ip-b.1981.0018

T. J. Miller, Converter Volt-Ampere Requirements of the Switched Reluctance Motor Drive, IEEE Transactions on Industry Applications, vol.21, issue.5, pp.1136-1144, 1985.
DOI : 10.1109/TIA.1985.349516

J. V. Byrne and M. F. Mcmullin, Design of a Reluctance Motor as a 10KW Spindle Drive, MOTOR-CON. Genève, pp.10-24, 1982.

B. K. Bose, T. J. Miller, P. M. Szczesny, and W. H. Bicknell, Microcomputer Control of Switched Reluctance Motor, IEEE Transactions on Industry Applications, vol.22, issue.4, pp.708-715, 1986.
DOI : 10.1109/TIA.1986.4504782

W. F. Ray, P. J. Lawrenson, R. M. Davis, J. M. Stephenson, N. N. Fulton et al., High-Performance Switched Reluctance Brushless Drives, IEEE Transactions on Industry Applications, vol.22, issue.4
DOI : 10.1109/TIA.1986.4504784

J. W. Finch and H. B. Metwally, Control Aspects of Brushless Drives Using Switched Reluctance Motors

H. B. Ertan, O. F. Yagan, and A. Diriker, Optimum Parameters for Doubly-Salient Motor Drives by a Voltage Source Drive, ICEM 90, vol.3, pp.806-811

D. A. Torrey and J. H. Lang, Optimal-efficiency excitation of variable-reluctance motor drives, IEE Proceedings B Electric Power Applications, vol.138, issue.1, pp.1-14, 1991.
DOI : 10.1049/ip-b.1991.0001

D. A. Torrey, Excitation of Variable Reluctance Motor Drives Electric machines & Power Systems, pp.713-729, 191991.

G. S. Buja and M. I. Valla, Control Characteristics of the SRM Drives -Part I : Operation in the Linear Region

S. Bolognani, G. S. Buja, and M. I. Valla, Switched-Reluctance Motor Performance Analysis Based On An Improved Modeling Of Its Magnetic Characteristics, Electric Machines & Power Systems, vol.126, issue.4, pp.425-438, 1991.
DOI : 10.1109/28.2896

H. R. Bolton and R. A. Ashen, Influence of motor design and feed-current waveform on torque ripple in brushless DC drives, IEE Proceedings B Electric Power Applications, vol.131, issue.3
DOI : 10.1049/ip-b.1984.0013

P. J. Roche, M. G. Egan, and J. M. Murphy, Intelligent 8096-Based Multimode Control of a Variable Reluctance Motor Drive

J. Corda, S. Masic, I. Bakalar, and N. Seljubac, Effects of the Form of Magnetic Circuits on Torque Pulsations of Switched Reluctance Motor, pp.88-93

R. S. Wallace and D. G. Taylor, Three Phase Switched Reluctance Motor Design to Reduce Torque Ripple, ICEM 90, pp.783-787

D. P. Tormey and D. A. Torrey, The Design of a Low-Current Variable-Reluctance-Motor Drive with Constrained Torque Ripple, pp.788-793

R. S. Wallace and D. G. Taylor, Low-torque-ripple switched reluctance motors for direct-drive robotics, IEEE Transactions on Robotics and Automation, vol.7, issue.6
DOI : 10.1109/70.105382

D. S. Schramm, B. W. Williams, and T. C. Green, Torque ripple reduction of switched reluctance motors by phase current optimal profiling, PESC `92 Record. 23rd Annual IEEE Power Electronics Specialists Conference, pp.857-860
DOI : 10.1109/PESC.1992.254793

R. Carlson and M. Lajoie-mazenc, A Synthesis of Torque Ripple Problem and Solutions in Electronically Commutated Permanent Magnet Synchronous Machines" SM 100 Conf, pp.1077-1082, 1991.

S. Clenet, Y. Lefevre, N. Sadowski, S. Astier, and M. Lajoie-mazenc, Compensation of Permanent Magnet Motors Torque Ripple by Means of Current Supply Waveshapes Control Determined by Finite Element Method

]. U. Steiert and H. Späth, Torque control of the doubly-salient reluctance motor, European Transactions on Electrical Power, vol.26, issue.4, pp.265-272, 1993.
DOI : 10.1002/etep.4450030403

]. T. Miller, Brushless Permanent-Magnet and Reluctance Motor Drives, 1989.

P. Laurent, M. Gabsi, and B. Multon, Sensorless rotor position analysis using resonant method for switched reluctance motor, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting, 1993.
DOI : 10.1109/IAS.1993.298877
URL : https://hal.archives-ouvertes.fr/hal-00673927

M. Jufer, M. Crivii, and K. Hafeti, Switched Synchronous Motors" SM 100, pp.27-29, 1991.

R. J. Blake, R. M. Davis, W. F. Ray, N. N. Fulton, P. J. Lawrenson et al., The Control of Switched Reluctance Motors for Battery Electric Road Vehicles, IEE Power Electronics and Variable Speed Drives, pp.361-364

P. J. Lawrenson, J. M. Stephenson, N. N. Fulton, and J. Corda, Switched Reluctance Motors for Traction Drives, I.C.E.M, issue.7, pp.410-417, 1980.

M. Jufer, Electromécanique", traité de l'école polytechnique fédérale de Lausanne, Editions Georgi, 1979.

M. Kant, Les actionneurs électriques pas à pas" Traité des nouvelles technologies, série automatique

D. P. Tormey, D. A. Torrey, and P. L. Levin, Minimum airgap-permeance data for the doubly-slotted pole structures common in variable-reluctance-motors, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting, pp.196-200, 1990.
DOI : 10.1109/IAS.1990.152186

]. N. Jacques, R. H. Demerdash, T. W. Miller, B. P. Nehl, C. J. Overton et al., Two-Dimensional Field Analysis of Cylindrical Machines with Permanent Magnet ExcitationMoteur synchrone autopiloté à fort couple et haute compacitéComparison between Features and Performance Characteristics of Fifteen H.P. Samarium Cobalt and Ferrite Based Brushless DC Motors Operated by the Same Power Conditioner, IEEE Trans. on I.A. Journées DRET électrotechnique avancée IEEE Trans. on PAS, vol.20, issue.102, pp.1267-1277, 1983.

M. Labraga, B. Davat, and M. Lajoie-mazenc, Conception d'un servomoteur à aimants permanents ferrites à entraînement direct", 5 è Colloque sur les moteurs pas à pas, pp.125-134, 1988.

]. B. Multon, S. Hassine, J. Y. Le-chenadec16-]-b, C. Multon, . B. Glaize et al., Pole Arcs Optimization of Vernier Reluctance Motors Supplied with Square Wave CurrentElectric Machines and Power SystemsOptimisation du dimensionnement des alimentations des machines à réluctance variableSize Power Ratio Optimization for the Converters of Switched Reluctance MotorsCurrent Feeding of Switched Reluctance Motor. Optimization of the Current Waveform to Minimize the Torque Ripple, IMACS TC1'90 IMACS TC1'93 "Interior Permanent Magnet Synchronous Motors For Adjustable-Speed Drives" IAS Annual Meeting, pp.6-7, 1985.

D. E. Cameron, J. H. Lang, and S. D. Umans, The origin and reduction of acoustic noise in doubly salient variable-reluctance motors, IEEE Transactions on Industry Applications, vol.28, issue.6, pp.61250-1255, 1992.
DOI : 10.1109/28.175275

M. J. Riezenman, Electric Vehicles (special report, IEEE Spectrum, pp.18-24, 1992.

D. E. Cameron, J. H. Lang, and D. Belanger, The computer-aided design of variable-reluctance generators, [Proceedings] APEC '92 Seventh Annual Applied Power Electronics Conference and Exposition, pp.114-120
DOI : 10.1109/APEC.1992.228423

A. A. Arkadan and B. W. Kielgas, Effects of force fitting on the inductance profile of a switched reluctance motor, IEEE Transactions on Magnetics, vol.29, issue.2, pp.2006-2009, 1993.
DOI : 10.1109/20.250803

D. P. Tormey, D. A. Torrey, and P. L. Levin, Minimum Airgap-Permeance Data for the Doubly-Slotted Pole Structures Common in Variable-Reluctance-Motors". proc, pp.196-200, 1990.

J. C. Moreira and T. A. Lipo, Simulation of a Four Phase Switched Reluctance Motor Including the Efeects of Mutual Coupling" Electric Machines and Power Systems 16, pp.281-289, 1989.

M. Liwschitz and L. , MARET Calcul des machines électriques Bibliothèque de l'Ingénieur, Editions SPES Lausanne, 1967.

]. A. Guilbert-théorie, Fonctionnement et calcul des machines électriques Dunod [7] LEVI Polyphase Motors : A Direct Approach to their Design Ed, J. WILEY, issue.6, 1951.

M. F. Ashby and D. R. Jones-matériaux, 1-Propriétés et applications Pergamon Press, 10] DE PISTOYE Construction mécanique des machines électriques Cours de l'école supérieure d'électricité, pp.1932-1965, 1980.

]. A. Wiart, New High-Speed High Power Machines with Converter Power Supply, pp.354-365, 1982.

]. V. Honsinger, Sizing Equations for Electrical Machinery

R. Krishnan, A. S. Bharadwaj, and P. N. Materu, Computer-Aided Design of Electrical Machines for Variable Speed Applications

R. Krishnan, R. Arumugam, and J. Lindsay, Design procedure for switched-reluctance motors, IEEE Transactions on Industry Applications, vol.24, issue.3, pp.2245-253, 1991.
DOI : 10.1109/28.2896

S. A. Nasar, I. Boldea, L. E. Unnewehr-permanent-magnet, ]. I. Boldea, and S. A. Nasar, Reluctance and Self-Synchronous MotorsEmerging Electric Machines with Axially Laminated Anisotropic Rotors : A Review, Electric Machines and Power Systems 19-1991, pp.673-703, 1993.

A. Fratta, A. Vagati, and F. Villata, On the Evolution of AC Machines for Spindle Drives Applications, Annual Meeting IAS, pp.699-704, 1989.

S. R. Macminn and W. D. Jones, A very high speed switched-reluctance starter-generator for aircraft engine applications, Proceedings of the IEEE National Aerospace and Electronics Conference, pp.1158-1764, 1989.
DOI : 10.1109/NAECON.1989.40453

E. V. Richter-a and . Radun, Switched Reluctance Machines for High Performance Operations in Harsh Environment -A Review PaperHigh Power Density Switched Reluctance Motor Drive for Aerospace Applications, IEEE Trans.I.A, vol.128, pp.1113-119, 1990.

D. E. Cameron and J. H. Lang, The Control of High Speed Variable Reluctance Generators in Electric Power Systems, APEC'92, pp.121-125

C. A. Ferreira, S. R. Jones, W. S. Heglund, and W. D. Jones, Detailed Design of a 30 kW Switched Reluctance Starter/Generator System for a Gas Turbine Engine Application, Industry Applications Society Annual Meeting, pp.97-105, 1993.

J. F. Maestre, Construction des moteurs synchrones à aimants, Journées électrotechniques du club EEA, p.9, 1993.

T. J. Miller, Synchronous and Switched Reluctance Motors, PCIM Conf, pp.172-178, 1992.

J. Henry-baudot, Petits moteurs électriques, pp.12-1975

J. Henry-baudot and G. Lacroux, Petits moteurs électriques, Techniques de l'Ingénieur, pp.9-1980

M. Jufer, M. Crivii, and K. Hatefi, Switched Synchronous Motors" SM 100, Part II, pp.27-29455, 1991.

]. A. Fratta and A. Vagati, Synchronous vs. DC Brushless Servomotor : the Machine Behaviour, Symp. on Electrical Drives CAGLIARI, Sept, vol.87, pp.53-60

M. R. Harris and T. J. Miller, Comparison of Design and Performance Parameters in Switched Reluctance and Induction Motors

P. J. Lawrenson, L. De, and . Structure, Switched Reluctance Drives with High Performances DC Drives

W. F. Ray, R. M. Davis, P. J. Lawrenson, J. M. Stephenson, N. N. Fulton et al., Switched Reluctance Motor Drives for Rail Traction : a Second View, proc. IEE, vol.131, pp.220-225, 1984.

H. Moghbelli, G. E. Adams, and R. G. Hoft, Performance of a 10-Hp switched reluctance motor and comparison with induction motors, IEEE Transactions on Industry Applications, vol.27, issue.3
DOI : 10.1109/28.81838

T. J. Miller, A. Hutton, C. Cossar, and D. A. Staton, Design of a Synchronous Reluctance Motor Drive

H. Van-der-broeck, D. Gerling, and E. Bolte, Switched Reluctance Drives and PWM Induction Motor Drive Compared for Low Cost Applications

S. Nishikata, W. Takanami, T. Kataoka, and A. Ishizaki, Consideration to the Operation Limit of a Field-Weakening Speed Control System for a Self- Controlled Synchronous Motor" EPE'93 Conf, pp.13-16354, 1993.

T. Kume, T. Iwakane, T. Sawa, T. Yoshida, and I. Nagai, A Wide Constant Power Range Vector-Controlled AC Motor Drive Using Winding Changeover Technique, IEEE Trans. on I.A, vol.27, pp.5934-939, 1991.

T. M. Jahns, G. B. Kliman, and T. W. Neumann, Interior Permanent Magnet Synchronous Motors For Adjustable-Speed Drives" IAS Conf, pp.814-823, 1985.

R. F. Schifferl and T. A. Lipo, Power Capability of Salient Pole Permanent Magnet Synchronous Motors in Variable Speed Drive Applications, IEEE Trans. on I.A, vol.26, pp.1115-123, 1990.

L. Xu, L. Ye, and A. El-antably, A New Design Concept of Permanent Magnet Machine for Flux Weakening Operation, IEEE IAS Conf, vol.1, pp.3-8, 1993.

R. E. Betz and T. J. Miller, Theoretical aspects of control of synchronous reluctance machines, IEE Proceedings B Electric Power Applications, vol.139, issue.4, pp.380-385
DOI : 10.1049/ip-b.1992.0042

T. A. Lipo, L. De, and . Structure, Synchronous Reluctance machines ? A Viable Alternative for AC Drives ? Troisième partie : rapport de synthèse, p.119

A. Fratta, A. Vagati, and F. Villata, AC Spindle Drives : a Unified Approach to the Fiel Weakening Behaviour". MOTORCON 1988 proc, pp.44-56

A. Fratta, A. Vagati, and F. Villata, Design Criteria of an I.P.M. Machine Suitable for Field Weakening

A. Fratta, A. Vagati, F. Villata, and . Conf, Permanent Magnet Assisted Synchronous Reluctance Drives for Constant Power Applications, Comparative Analysis of Control Requirements, pp.187-195, 1992.

J. V. Byrne and M. F. Mcmullin, Design of a Reluctance Motor as a 10KW Spindle Drive, MOTOR-CON. Genève, pp.10-24, 1982.

I. Takahashi, T. Koganezawa, G. Su, and K. Oyama, A Super High Speed PM Motor Drive System by Quasi-Current Source Inverter, IAS Annual Meeting, pp.657-662, 1993.

]. S. Nakada and M. Hisatani, Experimental Study of Super High Speed Reluctance Motor Using Amorphous Iron Cores Revue Japonaise, en japonais, 54] H. WEH "Synchronous Machines with New Topologies" SM 100, pp.1-9, 1991.

]. R. Belmans and W. Geysen, Vibrations and Audible Noise in Drives, DMC Lecture, vol.8, pp.1-36, 1988.

D. A. Torrey, Variable-reluctance generators in wind-energy systems, Proceedings of IEEE Power Electronics Specialist Conference, PESC '93, pp.561-567, 1981.
DOI : 10.1109/PESC.1993.471982

P. P. Acarnley, R. J. Hill, and C. W. Hooper, Detection of Rotor Position in Stepping and Switched Motors by Monitoring of Current Waveforms, IEEE Transactions on Industrial Electronics, vol.32, issue.3, pp.215-222, 1985.
DOI : 10.1109/TIE.1985.350161

M. Ehsani, I. Husain, and A. B. Kulkarni, Elimination of Discrete Position Sensor and Current Sensor in Switched Reluctance Motor Drives, IEEE Trans.I.A, vol.28, pp.1128-135, 1992.

M. Ehsani, S. Mahajan, K. R. Ramani, and . Husain, New modulation encoding techniques for indirect rotor position sensing in switched reluctance motors, IEEE IAS Conf, vol.1, pp.430-438, 1992.

M. Ehsani and I. Husain, Rotor position sensing in switched reluctance motor drives by measuring mutually induced voltages, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting, pp.422-429, 1992.
DOI : 10.1109/IAS.1992.244364

P. Laurent, B. Multon, and M. Gabsi, Procédé pour autopiloter sans capteur direct de position un moteur à réluctance variable et dispositif pour sa mise en oeuvre, 1992.

A. Lumsdaine and J. H. Lang, State observers for variable-reluctance motors, N°2, april 90, pp.133-142
DOI : 10.1109/41.52962

B. Multon and M. Gabsi, Influence de l'entrefer sur les performances et le dimensionnement d'un moteur à réluctance variable à double saillance et de son onduleur"7éme colloque internat. sur les moteurs pas à pas, pp.134-150, 1992.

N. H. Mvungi, J. M. Stephenson-e, and . Firenze, Accurate Sensorless Rotor Position Detection Detection in an S.R. Motor, pp.390-393, 1991.

S. K. Panda and G. A. Amaratunga, Comparison of two Techniques for Closed-Loop Drive of V.R. Step Motors without Direct Rotor Position Sensing

B. Multon, M. Geoffroy, and P. F. Desesquelles, Variable reluctance rotating shaft sensor for DC brushless vernier reluctance motor" 1st congres Japanese-French of MECATRONICS, 1992.

]. W. Harris and J. H. Lang, A simple motion estimator for variable reluctance motors, IEEE trans.I.A, vol.28, issue.11, pp.2237-243, 1990.

P. Laurent, B. Multon, and M. Gabsi, Comparison of electromagnetic perturbations between selfswitching and PWM mode for current control of a switched reluctance motor"PCIM-93 conference

T. Kenjo, Stepping Motors and their Microprocessor Controls Oxford Science Publications, 1984.

L. Cardoletti, A. Cassat, and M. Jufer, Sensorless Position and Speed Control of a Brushless DC Motor from Start-Up to Nominal Speed, EPE Journal, vol.2, issue.1, pp.125-159, 1992.
DOI : 10.1080/09398368.1992.11463282

L. Cardoletti and M. Jufer, Brushless DC Motor Standstill Indirect Position Sensor, PCIM Conf, pp.99-109, 1992.

J. T. Bass, M. Eshani, and T. J. Miller, Robust Torque Control of Switched-Reluctance Motors Without a Shaft-Position Sensor, IEEE Transactions on Industrial Electronics, vol.33, issue.3
DOI : 10.1109/TIE.1986.350224

J. T. Bass, M. Eshani, and T. J. Miller, Simplified Electronics for Torque Control of Sensorless Switched-Reluctance Motor, IEEE Transactions on Industrial Electronics, vol.34, issue.2
DOI : 10.1109/TIE.1987.350959

S. K. Panda and G. A. Amaratunga, Switched reluctance motor drive without direct rotor position sensing, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting, pp.525-530
DOI : 10.1109/IAS.1990.152235

S. K. Panda and G. A. Amaratunga, Comparison of two Techniques for Closed-Loop Drive of V.R. Step Motors without Direct Rotor Position Sensing, IEEE Trans. on I.E, vol.38, pp.295-101, 1991.

S. K. Panda and G. A. Amaratunga, Waveform Detection Technique for Indirect Rotor-Position Sensing of Switched-Reluctance Motor Drives. Part 1 : Analysis, IEE Proceedings-B, vol.140, issue.1, pp.80-88, 1993.

S. K. Panda and G. A. Amaratunga, Waveform Detection Technique for Indirect Rotor-Position Sensing of Switched-Reluctance Motor Drives. Part 2 : Experimental Results, IEE Proceedings-B, vol.140, issue.1, pp.89-96, 1993.

M. G. Egan, M. B. Harrington, and J. M. Murphy-"-p, Based Position Sensorless Control of Variable Reluctance Motor Drives, EPE, vol.91, issue.4, pp.24-029

S. R. Macminn, W. J. Rzesos, P. M. Szczesny, and T. M. Jahns, Application of Sensor Integration Techniques to Switched Reluctance Motor Drives, IEEE Trans. on I.A, vol.28, pp.61339-1344, 1992.

N. H. Mvungi, M. A. Lahoud, and J. M. Stephenson, A New Sensorless Position Detector for SR Drives

N. H. Mvungi and J. M. Stephenson, Accurate Sensorless Rotor Position Detection Detection in a S.R. Motor

A. Lumsdaine and J. H. Lang, State observers for variable-reluctance motors, IEEE Transactions on Industrial Electronics, vol.37, issue.2, pp.133-142, 1990.
DOI : 10.1109/41.52962

M. Ehsani, I. Husain, and A. B. Kulkarni, Elimination of Discrete Position Sensor and Current Sensor in Switched Reluctance Motor Drives, IEEE Trans.I.A, vol.28, pp.1128-135, 1992.

M. Eshani, S. Mahajan, K. R. Ramani, and . Husain, New Modulation Encoding Techniques for Indirect Rotor Position Sensing in Switched Reluctance Motors, IEEE IAS Conf, vol.1, pp.430-438, 1992.

M. Eshani and I. Husain, Rotor Position Sensing in Switched Reluctance Motor Drives by Measuring Mutually Induced Voltage, IEEE IAS Conf, pp.422-429, 1992.