C. C. , G. E. , and S. A. Barbosa-v, Assessment of risk and benefits in the use of flame retardants in upholstered furniture in continental Europe, Fire Safety Journal, vol.44, pp.801-807, 2009.

. Unknown-author, Standardisation mandate to CEN relative to the safety requirement for cigarettes. Commission of the European Communities, Directorate General Health and Consummers, p.425, 2008.

. Unknown-author, Fire statistics ? United Kingdom, Department of communities and Local Government, 2008.

. Unknown-author, . Ial, and . Consultants, PU chemicals and products in Europe, Middle East & Africa (EMEA), 2007.

M. Y. Polyuréthannes, Techniques de l'ingénieur, traité de plastiques et composites, AM3, vol.425, pp.1-18, 2000.

B. C. , D. Blasi-c, C. A. , M. V. , and C. C. , Reaction kinetics and morphological changes of a rigid polyurethane foam during combustion, Thermochimica Acta, vol.399, pp.127-137, 2003.

D. S. , L. Bras-m, B. S. , D. R. , P. F. et al., Analysis of fire gases released from polyurethane and fire-retarded polyurethane coatings, Journal of Fire Sciences, vol.18, pp.456-482, 2000.

M. V. , B. S. , L. Bras-m, D. S. , and S. J. , Modelling of nonisothermal kinetics in thermogravimetry, Physical Chemistry Chemical Physics, vol.2, pp.4708-4716, 2000.

C. T. , S. W. , and C. Y. Ho-s, Thermo oxidative degradation of phosphorus-containing polyurethane, Polymer Degradation and Stability, vol.49, pp.353-360, 1995.

K. N. , S. C. , W. H. , A. S. , D. F. et al., Thermal degradation of polyurethane bicomponent systems in controlled atmospheres, Polymer and Polymer Composites, vol.13, issue.1, pp.1-26, 2005.

B. V. Grayson-s, Heat release in fires, 1992.

O. H. , K. T. Okamoto-k, and T. S. , Characterization of polyurethanes by high-resolution pyrolysis-capillary gas chromatography, Journal of Analytical and Applied Pyrolysis, vol.12, pp.115-133, 1987.

K. P. Sharma-v, Condensation polymers from natural oils, Progress in Polymer Science, vol.33, issue.12, pp.1199-1215, 2008.
DOI : 10.1016/j.progpolymsci.2008.07.004

E. O. Bruns-m, Radical based thermal decomposition of polyethylene. NIST Annual Fire Conference, 2008.

M. C. , D. A. Lucas, and R. J. , Recovery of polyols from flexible polyurethane foam by " split-phase " glycolysis: Study on the influence of reaction parameters, Polymer Degradation and Stability, vol.93, pp.353-361, 2008.

S. A. Hull-t, L. K. , P. J. , and P. D. , The effect of temperature and ventilation condition on the toxic product yields from burning polymers, Fire and Materials, vol.32, pp.49-60, 2008.

B. H. , H. A. Hornung-u, and J. P. , Modelling of isothermal and dynamic pyrolysis of plastics considering non-homogeneous temperature distribution and detailed degradation mechanism, Journal of Analytical and Applied Pyrolysis, vol.49, pp.53-74, 1999.

G. A. Saha-b, Thermal degradation kinetics of poly(ethylene terephthalate) from waste soft drinks bottles, Chemical Engineering Journal, vol.111, issue.1, pp.39-43, 2005.
DOI : 10.1016/j.cej.2005.04.018

N. En and . Iso, Plastics -Differential scanning calorimetry (DSC) ? Part 1: General principles, pp.11357-11358, 1997.

R. T. Bustamante-valencia-l, G. E. , R. G. , and T. J. , Improving the Modelling of Thermal Decomposition of Polyether Polyurethane Foam. Poster presented in the 9th Symposium on Fire Safety Science, 2008.

S. V. and H. J. Hay-b, A new reference guarded hot plate designed for thermal conductivity measurements at high temperature, Poster presented in the 14th International Congress of Metrology, 2009.

N. En-iso-1716, Reaction to fire tests for building products ? Determination of the heat of combustion, 2002.

N. Iso, Solid mineral fuels -Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value, ICS, pp.75-160, 1928.

S. , G. R. Streibel-t, M. F. , S. M. , K. E. et al., Thermogravimetry coupled to single photon ionization quadrupole mass spectrometry: A tool to investigate the chemical signature of thermal decomposition of polymeric materials, Analytical Chemistry, vol.80, pp.3393-3403, 2008.

D. Campo-s, Identification des paramètres d'autenthicité du lait et produits laitiers (thèse de doctorat) Institut national agronomique Paris, 2006.

P. Mariey-l, Etude par spectroscopie IR-TF de l'adsorption et de la réactivité de l'ozone sur oxydes métalliques (thèse de doctorat), 1997.

. Unknown and . Report, Fire standardisation research in railways - Firestarr Project, Contract SMT4 ? CT 97 ? 2164 Commission of the European Communities, 2001.

N. Ac-/-301 and S. , NATO Reaction-to-fire tests for materials ? Toxicity of fire effluents. Edition 2: Draft I, 2005.

. Unknown-author, Benefits of fire safety engineering in the EU ? BENEFEU project. The potential benefits of fire safety engineering in the European Union. Final report to DG Enterprise, 2002.

A. Barhe-t, R. T. , R. F. , and T. J. , Numerical characterization of the mechanism of NOx formation during MSW incineration, Proceedings of the 6th Mediterranean Combustion Symposium, 2009.

L. J. , D. S. , M. V. , L. Bras-m, and D. R. , Study of the kinetics of pyrolysis of a rigid polyurethane foam: use of the invariant kinetics parameters method, Polymers for Advanced Technologies, vol.14, pp.796-801, 2003.

M. V. , B. S. , L. Bras-m, D. S. , and S. J. , Modelling of nonisothermal kinetics in thermogravimetry, Physical Chemistry Chemical Physics, vol.2, pp.4708-4716, 2000.

R. G. Fernandez-pello-c and U. D. , Computational model of forward and opposed smoldering combustion in microgravity, Proceedings of THE Combustion Institute 31, pp.2677-2684, 1842.

F. M. Shen-d, L. Y. , Y. C. , L. Z. , and C. K. , Kinetic study on pyrolysis and combustion of wood under different oxygen concentrations by using TG-FTIR analysis, Journal of Analytical and Applied Pyrolysis, vol.77, pp.22-27, 2006.

M. D. , B. Valencia-l, G. E. , P. M. , and C. C. , Modélisation du comportement au feu d'un composite par calcul de pyrolyse : approche combinée expérience-simulation à petite échelle, Mécanique & Industries, vol.10, pp.245-253, 2009.

R. T. Bustamante-valencia-l, G. E. , R. G. , and T. J. , Characterization of the kinetic of decomposition of polyether polyurethane foam (ppuf) ? A way for finding input data for fire simulations. BFRL Annual Fire Conference, 2008.

D. Blasi and C. , Modeling chemical and physical processes of wood and biomass pyrolysis, Progress in Energy and Combustion Science, vol.34, pp.47-90, 2008.

D. Blasi and C. , The state of the art of transport models for charring solid degradation, Polymer International, vol.52, issue.10, pp.1-14, 2000.
DOI : 10.1002/1097-0126(200010)49:10<1133::AID-PI519>3.0.CO;2-E

D. Blasi and C. , Modeling and simulation of combustion processes of charring and non-charring solid fuels, Progress in Energy and Combustion Science, vol.19, issue.1, pp.71-104, 1993.
DOI : 10.1016/0360-1285(93)90022-7

B. Valencia, L. , R. T. , G. E. , R. G. et al., Analysis of principal gas products during combustion of polyether polyurethane foam at different irradiance levels, Fire Safety Journal, vol.44, issue.7, pp.933-940, 2009.
DOI : 10.1016/j.firesaf.2009.05.003

D. Soete-g, Mécanismes de formation et de destruction des oxydes d'azote dans la combustion. Revue Générale de Thermique, pp.330-331, 1989.

B. Valencia, L. , R. T. , G. E. , R. G. et al., Yield of toxic species in cone calorimeter tests during polyether polyurethane foam fire, Proceeding of the 6th Mediterranean Combustion Symposium, 2009.

M. K. Klein-b, H. S. , and F. J. , Fire Dynamics Simulator (Version 5.3), User's Guide. NIST Special Publication 1019-5, National Institute of Standards and Technology, 2009.

M. K. Baum-h, R. R. , H. S. , and F. J. , Fire Dynamics Simulator (Version 5.3), Technical Reference Guide. NIST Special Publication 1018-5, National Institute of Standards and Technology, 2009.

B. Valencia, L. , R. T. , and G. E. , New method for simulating the kinetic of toxic gases production of upholstered furniture fire, Proceedings of the 12th Fire and Material Conference, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00422516

&. Id=-'c_ramp_residue-', 340 / &RAMP ID='c_ramp_residue', T= 100., F=1.370 / &RAMP ID='c_ramp_residue', T= 150., F=1.425 / &RAMP ID='c_ramp_residue', T= 200., F=1.495 / &RAMP ID='c_ramp_residue', T= 250., F=1.573 / &RAMP ID='c_ramp_residue', T= 300., F=1.650 / &RAMP ID='c_ramp_residue', T= 350., F=1.718 / &RAMP ID='c_ramp_residue', T= 400

&. Xb-=-surf_id6-=-'porte_eprouvette-',-'porte_eprouvette-',-'porte_eprouvette-',-'porte_eprouvette-',-'porte_eprouvette-',-'ppuf, S. Verified, =. Tmp_front, and . 880°c, COLOR = FIREBRICK/ Calibration of the CC irradiance levelTMP_FRONT' in order to change the irradiance level /10kWm-² => TMP_FRONT = 502°C, &SURF ID = 'Porte_eprouvette' Definition of the heater => TMP_FRONT = 1002°C Material for irradiance level calibration, pp.50-75, 2009.

/. &obst-xb-=-surf_id6-=-'porte_eprouvette-',-'porte_eprouvette-',-'porte_eprouvette-',-'porte_eprouvette-',-'porte_eprouvette&vent, S. Open-',-mb-=-'xmin-'/-&vent, . Surf_id=-'open-',-mb-=-'xmax-'/-&vent, and M. =. Surf_id=-'open-',, Definition of the CC fanExtracteur', VOLUME_FLUX = 0.024, COLOR = CYAN/ Definition of the boundary conditions, &VENT SURF_ID='OPEN' , MB = 'YMAX' / &VENT SURF_ID='OPEN' , MB = 'ZMIN' / &VENT SURF_ID='Extracteur' , MB = 'ZMAX'/ Definition of the heater