L. Fait-de-présécher-les-corps, B40_sec et B60_sec) annule également le risque d'instabilité thermique du béton, p.80

Z. P. Bazant, G. Et, and . Zi, Decontamination of Radionuclides from Concrete by Microwave Heating. I: Theory, Journal of Engineering Mechanics, vol.129, issue.7, pp.777-784, 2003.
DOI : 10.1061/(ASCE)0733-9399(2003)129:7(777)

F. Benboudjema, Modèlisation des déformations différées du béton sous sollicitations biaxiales. Application aux enceintes de confinement de bâtiments réacteurs des centrales nucléiares, 2002.

F. Benboudjema, F. Meftah, and J. M. Et-torrenti, A viscoelastic approach for the assessment of the drying shrinkage behaviour of cementitious materials, Materials and Structures, vol.31, issue.89, pp.163-174, 2007.
DOI : 10.1617/s11527-006-9126-8
URL : https://hal.archives-ouvertes.fr/hal-00693662

J. Bennet, J. Claesson, and S. Et-thelandersson, Calculation of temperature, moisture, and pressure distributions in concrete exposed to fire, 1976.

D. P. Bentz, Fibers, Percolation, and Spalling of High-Performance Concrete, ACI Materials Journal, vol.97, issue.3, pp.351-359, 2000.

M. Bernard, . Lévy, and P. L. Et-veyron, Comportement du béton dans les incendies de tunnels, Tunnels et Ouvrages Souterrains, vol.203, pp.301-308, 2007.

M. Bettelini, H. Neuenschwander, A. Henke, M. Gagliardi, and W. Et-steiner, The fire in the St Gotthard Tunnel of, International symposium on catastrophic tunnel fires (CTF), 2001.

M. Bianco, G. Bilardi, F. Pesavento, G. Pucci, and B. Et-schrefler, An Accurate and Efficient Frontal Solver for Fully-Coupled Hygro-Thermo-Mechanical Problems, Computational Science ? ICCS, vol.2002, pp.733-742, 2002.
DOI : 10.1007/3-540-46043-8_74

Y. Billard, M. Shekarchi, G. Debicki, L. Granger, and D. Et-chauvel, Heat and mass transfers in a concrete wall with composite liner under accidental conditions, Nuclear Engineering and Design, vol.228, issue.1-3, pp.1-3, 2004.
DOI : 10.1016/j.nucengdes.2003.06.027

A. Bilodeau, V. K. Kodur, and G. C. Hoff, Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire, Cement and Concrete Composites, vol.26, issue.2, pp.163-174, 2004.
DOI : 10.1016/S0958-9465(03)00085-4

M. Bohn, A. Gianaria, J. Pinchard, H. Richard, and C. Et-simon, Rapport pratique chimie minérale. Semaine n°2, 2008.

L. Borot and C. Et-féron, Apports des essais incendie pour la détermination de la tenue au feu des structures, Tunnels et ouvrages souterrains no198, pp.365-366, 2006.

L. Bostrom, Investigation of damage to a bridge caused by a road tanker fire, Brand Posten, vol.34, pp.28-29, 2006.

M. Castellote, C. Alonso, C. Andrade, X. Turillas, and J. Et-campo, Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction, Cement and Concrete Research, vol.34, issue.9, pp.1633-1644, 2004.
DOI : 10.1016/S0008-8846(03)00229-1

C. Castillo and A. J. Et-durani, Effect of transient high temperature on high-strength concrete, ACI Materials Journal, pp.47-53, 1990.

S. Y. Chan, G. F. Peng, and M. Et-anson, Fire behaviour of high-performance concrete made with silica fume at various moisture contents, ACI Materials Journal, vol.96, issue.3, pp.405-411, 1999.

M. Choinska, A. Khelidj, G. Chatzigeorgiou, and G. Et-pijaudier-cabot, Effects and interactions of temperature and stress-level related damage on permeability of concrete, Cement and Concrete Research, vol.37, issue.1, pp.79-88, 2007.
DOI : 10.1016/j.cemconres.2006.09.015
URL : https://hal.archives-ouvertes.fr/hal-00354323

R. J. Connoly, The spalling of concrete in fires, 1995.

M. Consolazio, Measurement and prediction of pore pressures in saturated cement mortar subjected to radiant heating, ACI Materials Journal, vol.95, issue.5, pp.525-536, 1998.

W. J. Copier, Spalling of normalweight and lightweight concrete on exposure to fire, 1979.

D. Pont and S. , Lien entre la perméabilité et l'endommagement dans les bétons à haute température, 2004.

D. Pont, S. , H. Colina, A. Dupas, and A. Et-ehrlacher, An experimental relationship between complete liquid saturation and violent damage in concrete submitted to high temperature, Magazine of Concrete Research, vol.57, issue.8, pp.455-461, 2005.
DOI : 10.1680/macr.2005.57.8.455

D. Pont, S. Et, and A. Ehrlacher, Numerical and experimental analysis of chemical dehydration, heat and mass transfers in a concrete hollow cylinder submitted to high temperatures, International Journal of Heat and Mass Transfer, vol.47, issue.1, pp.135-147, 2004.
DOI : 10.1016/S0017-9310(03)00381-8

H. Darcy, Les fontaines publiques de la ville de Dijon : exposition et application des principes à suivre et des formules à employer dans les questions de distribution d'eau, 1856.

A. Davey, Investigations on building fires. Part V. Fire tests on structural elements, National Building Studies, 1953.

D. Sa and C. , Etude hydro-mécanique et thermo-mécanique du béton. Influence des gradients et des incompatibilités de déformation, Thèse de doctorat de l'Ecole Normale Supérieure, 2007.

D. Gawin, F. Pesavento, and B. A. Schrefler, Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.13-14, pp.13-14, 2003.
DOI : 10.1016/S0045-7825(03)00200-7

D. Gawin, F. Pesavento, and B. A. Schrefler, Towards prediction of the thermal spalling risk through a multi-phase porous media model of concrete, Computer Methods in Applied Mechanics and Engineering, vol.195, issue.41-43, pp.41-43, 2006.
DOI : 10.1016/j.cma.2005.10.021

M. Gillen, Short-term creep of concrete at elevated temperatures, Fire and Materials, vol.9, issue.4, pp.142-148, 1981.
DOI : 10.1002/fam.810050403

Z. Gong, A. S. Et, and . Mujumdar, The influence of an impermeable surface on pore steam pressure during drying of refractory concrete slabs, International Journal of Heat and Mass Transfer, vol.38, issue.7, pp.1297-1303, 1995.
DOI : 10.1016/0017-9310(94)00239-R

H. Gross, High-temperature creep of concrete, Nuclear Engineering and Design, vol.32, issue.1, pp.129-147, 1975.
DOI : 10.1016/0029-5493(75)90095-3

S. E. Gustafsson and T. Et-long, Transient Plane Source (TPS) for Measuring Thermal Properties of Building Materials, Fire and Material, vol.19, pp.43-49, 1995.

A. Haack, Catastrophic Tunnel Fires -What have we learnt? International symposium on catastrophic tunnel fires (CTF), 2003.

I. Hager, Comportement à haute température des bétons à haute performance évolution des principales propriétés mécaniques, 2004.

I. Hager and P. Et-pimienta, Mechnical properties of HPC at high temperature. Fib task group 4.3 "Fire design of concrete structures, pp.2-4, 2004.

I. Hager, P. Et, and . Pimienta, Transient thermal strain of high performance concretes. Concreep 7, 2005.

S. K. Handoo, S. Agarwal, and S. K. Agarwal, Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperatures, Cement and Concrete Research, vol.32, issue.7, pp.1009-1018, 2002.
DOI : 10.1016/S0008-8846(01)00736-0

K. Harada, T. Et, and . Terai, Heat and Mass Transfer in the Walls Subjected to Fire, Fire Science and Technology, vol.17, issue.1, pp.423-435, 1997.
DOI : 10.3210/fst.17.70

T. Z. Harmathy, Effect of Moisture on the Fire Endurance of Building Elements, 1965.
DOI : 10.1520/STP48429S

T. Z. Harmathy, Thermal properties of concrete at elevated temperatures, Journal of Materials, vol.5, pp.47-74, 1970.

. Hertz, Microwave heating for fire material testing of concrete -an experimental study, 1983.

M. H. Hettema, K. H. Wolf, and C. J. Et-de-pater, The influence of steam pressure on thermal spalling of sedimentary rock: Theory and experiments, International Journal of Rock Mechanics and Mining Sciences, vol.35, issue.1, pp.3-15, 1998.
DOI : 10.1016/S0148-9062(97)00318-5

H. Ingason, Fire Development in Catastrophic Tunnel Fires (CTF) International symposium on catastrophic tunnel fires (CTF), 2003.

R. Jansson, Measurement of concrete thermal properties at high temperatures. fib task group 4.3 workshop "Fire design of concrete structures: What now? What next, 2004.

R. Jansson, Liquid/steam pressure measurement inside concrete exposed to fire. 4th International workshop Structures in Fire (SIF'06), 2006.

R. Jansson, Material properties related to fire spalling of concrete, 2008.

R. Jansson, Guidelines for the fire response of concrete, Brand Posten, vol.30, p.28, 2004.

R. Jansson, Liquid/steam pressure measurement inside concrete exposed to fire. 4th International workshop Structures in Fire (SIF'06), 2006.

R. Jansson and L. Et-bostrom, Experimental study on the influence of polypropylene fibres on material properties and fire spalling of concrete. fib task group 4.3 workshop "Fire design o concrete structures -from materials modelling to structural performance, 2007.

R. Jansson and L. Et-bostrom, Fire spalling: theories and experiments. 5th International RILEM symposium on Self-Compacting Concrete, 2007.

R. Jansson and L. Et-bostrom, The influence of pressure in the pore system on fire spalling of concrete Singapore, 5th International conference on Structures in Fire (SIF'08, 2008.

J. J. Jensen, E. A. Hansen, U. Danielsen, and S. Et-seglem, Offshore concrete structures exposed to hydrocarbon fire, First International Conference on Concrete for Hazard Protection, 1987.

K. D. Hertz, Danish investigations on silica fume concretes at elevated temperatures, ACI Materials Journal, vol.89, issue.4, pp.345-347, 1992.

P. Kalifa, G. Chéné, and C. Gallé, High-temperature behaviour of HPC with polypropylene fibres, Cement and Concrete Research, vol.31, issue.10, pp.1487-1499, 2001.
DOI : 10.1016/S0008-8846(01)00596-8

P. Kalifa, F. D. Menneteau, H. Sallée, and D. Et-quenard, The use of gamma-ray spectrometry for dynamic deterination of moisture fields in high performance concrete subjeced to elevated temperatures, 1998.

T. M. Kanema, Influence des paramètres de formulation sur le comportement à haute température des bétons, 2007.

A. Khoury, Concrete spalling -Review, Fire Safety Design, 2000.

J. C. Mindeguia, P. Pimienta, A. Beurotte, L. Borderie, C. Et-carré et al., Experimental study of mechanical behaviour of High Performance Concretes at High Temperature. fib task group 4.3 workshop "Fire design o concrete structures -from materials modelling to structural performance, 2007.

G. Mounajed, H. Boussa, and F. Et-grondin, Transient thermal strain of concrete: intrinsic behaviour or structural effect? Concreep 7, 2005.

Y. Msaad, Analyse des mécanismes d'écaillage du béton soumis à des températures élevées, 2005.

Y. Msaad, Comparison between Hydraulic and Thermal Spalling in Heated Concrete Based on Numerical Modeling, Journal of Engineering Mechanics, vol.133, issue.6, pp.608-615, 2007.
DOI : 10.1061/(ASCE)0733-9399(2007)133:6(608)

Y. Msaad, G. Et, and . Bonnet, Analyses of Heated Concrete Spalling due to Restrained Thermal Dilation: Application to the ???Chunnel??? Fire, Journal of Engineering Mechanics, vol.132, issue.10, pp.1124-1132, 2006.
DOI : 10.1061/(ASCE)0733-9399(2006)132:10(1124)
URL : https://hal.archives-ouvertes.fr/hal-00691112

K. W. Nasser, A. M. Et, and . Neville, Creep of concrete at temperatures above normal, Nuclear Engineering and Design, vol.4, issue.1, pp.90-96, 1966.
DOI : 10.1016/0029-5493(66)90029-X

W. Nechnech, Contribution à l'étude numérique du comportement du béton et des structures en béton armé soumises à des sollicitations thermiques et mécaniques couplées : une approche thermo-élasto-plastique endommageable, 2000.

A. Noumowe, Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 ??C, Cement and Concrete Research, vol.35, issue.11, pp.2192-2198, 2005.
DOI : 10.1016/j.cemconres.2005.03.007

A. Noumowé, Effet de hautes températures (20-600 °C) sur le béton. Cas partiulier du béton à hautes performances, 1995.

A. Noumowe, H. Carre, A. Daoud, and H. Et-toutanji, High-Strength Self-Compacting Concrete Exposed to Fire Test, Journal of Materials in Civil Engineering, vol.18, issue.6, pp.754-758, 2006.
DOI : 10.1061/(ASCE)0899-1561(2006)18:6(754)

A. Noumowe, P. Clastres, G. Debicki, and J. L. Et-costaz, Thermal stresses and water vapour pressure of high performance concrete at high temperature. 4th International symposium on utilization of high-strength/high-performance concrete, 1996.

A. N. Noumowe, P. Clastres, G. Debicki, and J. L. Et-costaz, Transient heating effect on high strength concrete, Nuclear Engineering and Design, vol.166, issue.1, pp.99-108, 1996.
DOI : 10.1016/0029-5493(96)01235-6

D. Persy, Investigations sur un ouvrage en béton incendié, Bulletin de liaison des Ponts et Chaussées, vol.145, pp.108-114, 1986.

M. Petkovski and R. S. Crouch, Strains under transient hygro-thermal states in concrete loaded in multiaxial compression and heated to 250????C, Cement and Concrete Research, vol.38, issue.4, pp.586-596, 2008.
DOI : 10.1016/j.cemconres.2007.10.008

L. T. Phan, High-Strength Concrete at High Temperature: An Overview. Utilization of High Strength/High Performance Concrete, 6th International Symposium, 2002.

V. Picandet, Influence d'un endommagement mécanique sur la perméabilité et la diffusivité hydrique des bétons, 2001.

P. Pimienta and I. Et-hager, Mechanical behaviour of HPC at high temperature, 6th International Symposium on High Strength / High Performance Concrete, 2002.

C. Qian, H. Wang, W. Sun, Z. Guo, and P. Et-stroeven, Numerical calculations of vapour pressure in concrete exposed to fire, Magazine of Concrete Research, vol.57, issue.3, pp.179-184, 2005.
DOI : 10.1680/macr.2005.57.3.179

G. Ranc, J. Sercombe, and S. Et-rodrigues, Comportement ?? haute temp??rature du b??ton de structure Impact de la fissuration sur les transferts hydriques, Revue fran??aise de g??nie civil, vol.7, issue.4, pp.397-424, 2003.
DOI : 10.3166/rfgc.7.397-424

E. Richter, Propagation and developments of temperatures from tests with railway and road vehicles. International conference on fire in tunnels, 1994.

H. Sabeur, Etude du comportement du béton à hautes températures Une nouvelle approche thermo-hygro-mécanique couplée pour la modèlisation du fluage thermque transitoire, 2006.

H. Sabeur, F. Et, and . Meftah, Dehydration creep of concrete at high temperatures, Materials and Structures, vol.77, issue.(161, pp.17-30, 2008.
DOI : 10.1617/s11527-006-9213-x
URL : https://hal.archives-ouvertes.fr/hal-00693584

H. Sabeur, F. Meftah-colina, H. Et-platret, and G. , Correlation between transient creep of concrete and its dehydration, Magazine of Concrete Research, vol.60, issue.3, pp.157-163, 2007.
DOI : 10.1680/macr.2007.00132
URL : https://hal.archives-ouvertes.fr/hal-00814849

P. Salomao, Polypropylene Fibers and their Effects on Processing Refractory Castables, International Journal of Applied Ceramic Technology, vol.86, issue.[7], pp.496-502, 2007.
DOI : 10.1111/j.1744-7402.2007.02170.x

G. Sanjayan, L. J. Et, and . Stocks, Spalling of High-Strength Silica Fume Concrete in Fire, ACI Materials Journal, vol.90, issue.2, pp.170-173, 1993.

G. Sanjayan and L. J. Stocks, Spalling of high-strength silica fume concrete in fire, ACI Materials Journal, vol.90, issue.2, pp.170-173, 1993.

U. Schneider, Concrete at high temperatures ??? A general review, Fire Safety Journal, vol.13, issue.1, pp.55-68, 1988.
DOI : 10.1016/0379-7112(88)90033-1

U. Schneider, U. Et, and . Diederichs, Physical properties of concrete from 20 °C up to melting, Braunschweig Betonwerk + Fertigteil-Technik, vol.3, pp.141-149, 1981.

U. Schneider, H. J. Et, and . Herbst, Pressure Development in Heated Concrete Members, 10th International Conference on Structural Mechanics in Reactor Technology, 1989.

B. A. Schrefler, G. A. Khoury, D. Gawin, and C. E. Et-majorana, Thermo???hydro???mechanical modelling of high performance concrete at high temperatures, Engineering Computations, vol.19, issue.7, pp.7-8, 2002.
DOI : 10.1108/02644400210444320

P. Schwesinger, G. Ehlert, and R. Wolfel, Creep of concrete at elevated temperatures and boundary conditions of moisture, Cement and Concrete Research, vol.17, issue.2, pp.263-272, 1987.
DOI : 10.1016/0008-8846(87)90109-8

J. Sercombe, C. Galle, D. S. Et-bouniol, and P. , On the importance of thermal gradients in the spalling of high-strength concrete 14th Engineering Mechanics Conference, 2000.

P. Shuttleworth, Fire protection of precast concrete tunnel linings on the Channel Tunnel Rail Link, pp.12-22, 2001.

A. G. Smith, P. J. Et, and . Pells, Impact of fire on tunnels in Hawkesbury sandstone, Tunnelling and Underground Space Technology, vol.23, issue.1, pp.65-74, 2008.
DOI : 10.1016/j.tust.2006.11.003

P. J. Sullivan, Deterioration and spalling of high strength concrete under fire, 2001.

R. Tenchev and B. H. Khalafallah, Numerical Analysis of Pore Pressure and Thermal Stresses in Intensely Heated Concrete Columns, BCA Concrete Communication Conference, 2000.

R. Tenchev, P. Et, and . Purnell, An application of a damage constitutive model to concrete at high temperature and prediction of spalling, International Journal of Solids and Structures, vol.42, issue.26, pp.6550-6565, 2005.
DOI : 10.1016/j.ijsolstr.2005.06.016

R. T. Tenchev, J. A. Purkiss, and L. Y. Li, Numerical analysis of thermal spalling in a concrete column, 9th National congress on theoretical and applied mechanics, 2001.

S. Thelandersson, Effect of high tempertures on tensile strength of concrete, Bulletin of Lund Institute of Technology, vol.26, 1972.

S. Thelandersson, Mechanical behaviour of concrete under torsional loading at transient, high-temperature conditions, Bulletin of Lund Institute of Technology, vol.46, 1974.

. Trouillet and . Brunet-buschiazzo, Incendies des ouvrages d'art. Manifestations, conséquences. Cas particulier des ouvrage à précontrainte extérieure, Bulletin de liaison des Ponts et Chaussées, vol.209, pp.35-48, 1997.

F. Ulm, P. Acker, and M. Levy, The ???Chunnel??? Fire.???II: Analysis of Concrete Damage, Journal of Engineering Mechanics, vol.125, issue.3, pp.283-289, 1999.
DOI : 10.1061/(ASCE)0733-9399(1999)125:3(283)
URL : https://hal.archives-ouvertes.fr/hal-00586628

F. Ulm, O. Coussy, and Z. P. Bazant, The ???Chunnel??? Fire. I: Chemoplastic Softening in Rapidly Heated Concrete, Journal of Engineering Mechanics, vol.125, issue.3, pp.272-282, 1999.
DOI : 10.1061/(ASCE)0733-9399(1999)125:3(272)
URL : https://hal.archives-ouvertes.fr/hal-00586628

F. J. Ulm, Couplages thermochémomécaniques dans les bétons, 1999.

G. H. Van-der-heijden, R. M. Van-bijnen, L. Pel, and H. P. Et-huinink, Moisture transport in heated concrete, as studied by NMR, and its consequences for fire spalling, Cement and Concrete Research, vol.37, issue.6, pp.894-901, 2007.
DOI : 10.1016/j.cemconres.2007.03.004

H. Vosteen, R. Et, and . Schellschmidt, Influence of temperature on thermal conductivity, thermal capacity and thermal diffusivity for different types of rock, Physics and Chemistry of the Earth, Parts A/B/C, vol.28, issue.9-11, pp.9-11, 2003.
DOI : 10.1016/S1474-7065(03)00069-X

K. Watanabe, An overview of principles and techniques of moisture properties measurement for building materials and components. France-Japan workshop on Mass- Energy transfer and deterioration of building materials and components, 1998.

A. Witek, D. Gawin, F. Pesavento, and B. A. Et-schrefler, Finite element analysis of various methods for protection of concrete structures against spalling during fire, Computational Mechanics, vol.61, issue.2, pp.271-292, 2006.
DOI : 10.1007/s00466-005-0024-7

W. A. Yanko and G. R. Consolazio, Experimental and Numerical Evaluation of Concrete Spalling Due to Pore Pressure Development During Extreme Thermal Loading. Structures 2004 -Building On The Past: Securing The Future, 2004.

K. Yasuda, . Ono, and T. Otsuka, Fire protection for TBM shield tunnel lining, Tunn. Undergr. Sp. Tech, vol.19, pp.4-5, 2004.

G. Ye, G. D. Schutter, and L. Et-taerwe, Spalling behaviour of small self-compacting concrete slabs under standard fire conditions, 5th International RILEM symposium on Self- Compacting Concrete, 2007.

G. Ye, X. Liu, D. Schutter, G. Taerwe, L. Et-vandevelde et al., Phase distribution and microstructural changes of self-compacting cement paste at elevated temperature, Cement and Concrete Research, vol.37, issue.6, pp.978-987, 2007.
DOI : 10.1016/j.cemconres.2007.02.011

M. Zeiml, Concrete subjected to fire loading -from experimental investigation of spalling and mass-transport properties to structural safety assessment of tunnel linings under fire, 2008.

M. Zeiml, R. Et, and . Lackner, Experimental Investigation on Spalling Mechanisms in Heated Concrete, 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures, 2007.

M. Zeiml, R. Lackner, F. Pesavento, and B. A. Et-schrefler, Thermo-hydro-chemical couplings considered in safety assessment of shallow tunnels subjected to fire load, Fire Safety Journal, vol.43, issue.2, pp.83-95, 2008.
DOI : 10.1016/j.firesaf.2007.05.006

M. Zeiml, D. Leithner, R. Lackner, and H. A. Et-mang, How do polypropylene fibers improve the spalling behavior of in-situ concrete?, Cement and Concrete Research, vol.36, issue.5, pp.929-942, 2006.
DOI : 10.1016/j.cemconres.2005.12.018

V. V. Zhukov, Reasons of explosive spalling of concrete by fire Concrete and reinforcement concrete 3, 1976.

G. Zi, Z. P. Et, and . Bazant, Decontamination of Radionuclides from Concrete by Microwave Heating. II: Computations, Journal of Engineering Mechanics, vol.129, issue.7, pp.785-792, 2003.
DOI : 10.1061/(ASCE)0733-9399(2003)129:7(785)

V. V. Zukov, Explosive failure of concrete during a fire, Translation n°2124, Joint Fire Research Organisation, 1975.