A. Ahjaco, Modélisation des moteurs asynchrones triphasés en régime transitoire avec saturation et harmoniques d'espace. Application au diagnostic, 1997.

A. Angot, Compléments de Mathématiques à l'usage des ingénieurs de l'électrotechnique et des télécommunications, 1961.

. Belmans, . Geysen, and V. Jordan, Unbalanced magnetic pull in three phase two pole induction motors with eccentric rotor, ICEM'82, pp.65-69, 1982.

R. Belmans, . Geysen, and V. Jordan, Unbalanced magnetic pull an homopolar flux in three phase induction motors with eccentric rotors, ICEM'82, pp.916-921, 1982.

W. Bonal and C. , Torque pulse minimisation in current source inverter a.c. motor drive systems, ICEM'94, pp.709-714, 1994.

C. Brudny and M. , Bruit magnétique des machines asynchrones, caractérisation , réduction, Journée vibrations et bruit accoustique des machines électriques, pp.402-405, 1997.

F. W. Carter, The reluctance of an air gap having slots in both opposing surfaces. The Electrician, pp.400-401, 1918.

B. Cassoret, Réduction active du bruit magnétique des machines asynchrones directement connectées au réseau, 1996.

S. Dorell, Calculation and mesurement of unbalanced magnetic pull in cage induction motors with eccentric rotors, part 1 and part 2, IEE Proceeding Power Application, vol.3, pp.193-210, 1996.

T. Dorell and R. , Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors, IEEE Transactions on Industry Applications, vol.33, issue.1, pp.24-34, 1997.
DOI : 10.1109/28.567073

S. A. Eldhemy, Analysis of space harmonie interactions in squirrel cage induction machines . part 2 : The torque analysis. Electric Machines and Power Systems, pp.397-412, 1988.

A. Foggia, Méthodes de calcul des inductances de fuites, p.3

O. Fudeh, Modeling and analysis of induction machines containing space harmonies . part 1 : Modeling and transformation, IEEE Transactions on Power Apparatus and Systems, issue.8, pp.1022608-2615, 1983.

. Gentile, . Martelli, and T. Rotondale, Harmonie analysis of induction motors with stator faults. Electric Machines and Power Systems, pp.215-232, 1994.

M. Golebiowski, The effect of strong parasitic synchronous and asynchronous torques in induction machine with rotor eccentricity, 2000 10th Mediterranean Electrotechnical Conference. Information Technology and Electrotechnology for the Mediterranean Countries. Proceedings. MeleCon 2000 (Cat. No.00CH37099), pp.982-985, 2000.
DOI : 10.1109/MELCON.2000.879697

M. Golebiowski, Identification of the sources of the torque and current harmonics in the induction motor, ICEM'2000, pp.295-298, 2000.

F. Heliodore, Modélisation avancée des machines électriques tournantes pour le filtrage actif et l'aide au diagnostic, Journées Nationales d'Automatique (JNA) , Autrans, pp.january-february, 2001.

. Hesse, Air gap permeance in doubly-slotted asynchronous machines, IEEE Transactions on Energy Conversion, vol.7, issue.3, pp.491-499, 1992.
DOI : 10.1109/60.148571

S. Holtz, Identification and compensation of torque ripple in high-precision permanent magnet motor drives, IEEE Transactions on Industrial Electronics, vol.43, issue.2, pp.309-320, 1996.
DOI : 10.1109/41.491355

K. Ishibashi, Experimental study of harmonic magnetic flux of small squirrel-cage induction motor, Electrical Engineering in Japan, vol.118, issue.6, pp.118-128, 1990.
DOI : 10.1002/eej.4391100612

G. Kron, Induction Motor Slot Combinations Rules to Predetermine Crawling, Vibration, Noise and Hooks in the Speed-Torque Curve, Winter convention of the AIEE, 1931.
DOI : 10.1109/T-AIEE.1931.5055866

G. Kron, The application of tensors to the analysis of totating electrical machinery, General Electric Review, pp.1935-1938

G. Kron, Equivalent circuits of the shaded-pole motor with space harmonies, AIEE Transactions, vol.69, pp.735-741, 1950.

G. Kron, Equivalent Circuits of Electric Machinery, 1967.

. Lechenadec, . Geoffroy, and M. Multon, Torque ripple minimization in switched reluctance motors by optimisation of current wave-forms and of tooth shape with copper lasses and "v.a. silicon" constraints, ICEM'94, pp.559-564, 1994.

I. Liang and S. , Quantitative study on harmonic flux densities of squirrelcage induction motors, IEEE Transactions on Magnetics, vol.26, issue.2, pp.956-959, 1990.

M. Lipo, Modeling of saturated ac machines including air gap flux harmonie components, IEEE Transactions on Industry Applications, vol.28, issue.2, pp.343-349, 1992.

J. W. Lynn, The tensor equations of electrical machines. The Proceedings of the Institution of Electrical Engineers, pp.149-167, 1955.

T. Manolas, Analysis of squirrel cage induction motors with broken bars and rings, IEEE Transactions on Energy Conversion, vol.14, issue.4, pp.1300-1305, 1999.
DOI : 10.1109/60.815063

A. Moraru, Computation of winding ends leakage inductance, 1997 IEEE International Electric Machines and Drives Conference Record, 1997.
DOI : 10.1109/IEMDC.1997.604227

N. Nee, A contribution to the calculation of harmonie iron losses of inverter-fed induction motors, ICEM'94, pp.698-703, 1994.

C. Neto and S. , Analysis of a three-phase induction machine including time and space harmonic effects: the a, b, c reference frame, IEEE Transactions on Energy Conversion, vol.14, issue.1, 1999.
DOI : 10.1109/60.749151

K. Oberretl, Die Oberfeldtheorie des K??figmotors unter Ber??cksichtigung der durch die Ankerr??ckwirkung verursachten Statoroberstr??me und der parallelen Wicklungszweige, Archiv f??r Elektrotechnik, vol.80, issue.6, pp.343-364, 1965.
DOI : 10.1007/BF01587916

. Paap, The analysis of 3-phase squirrel-cage induction motors including space harmonics and mutual slotting in transient and steady state, IEEE Transactions on Energy Conversion, vol.6, issue.1, pp.69-75, 1991.
DOI : 10.1109/60.73791

. Paap, On the theory of 3-phase squirrel-cage induction motors including space harmonics and mutual slotting, IEEE Transactions on Energy Conversion, vol.6, issue.1, pp.76-82, 1991.
DOI : 10.1109/60.73792

H. Paap, The analysis of the 3-phase squirrel-cage induction motor with space harmonics. part 1 : Equations developed by a new time-dependent transformation

H. Paap, The analysis of the 3-phase squirrel-cage induction motor with space harmonics. part 2 : The influence of the space harmonics on the transient behaviour

H. Razik and R. , On the design of dual-stator windings for safe vsi fed ac machine drives, IEEE Industry Applications Conference, pp.1123-1130, 2001.

G. J. Rogers, A dynamic induction motor model including space harmonics. Electric Machines and Electromechanics : an international quarterly, pp.177-190, 1979.

E. Schaeffer, Diagnostic des machines asynchrones : modéles et outils paramétriques dédiés à la simulation et à la détection de défauts, 1999.

. Shima, . Ide, . Takahashi, and N. Yoshinari, Calculation of leakage inductances of a salient-pole synchronous machine using finite elements, IEEE Transactions on Energy Conversion, vol.14, issue.4, pp.1156-1161, 1999.
DOI : 10.1109/60.815041

R. Silvino, An improved estimation of the induction machine leakage inductances, IEEE Transactions on Industrial Electronics, vol.46, issue.5, pp.1040-1042, 1999.
DOI : 10.1109/41.793355

R. Sobczyk, Harmonic analysis of currents and torques of squirrel-cage motors at balanced power supply, ICEM'82, pp.775-779, 1982.

. Staudt, AC machine dynamics described by space vectors using state-space notation, European Transactions on Electrical Power, vol.77, issue.4, 1999.
DOI : 10.1002/etep.4450090102

D. Staudt, Hyperspace vectors : a new four-quantity extension of spacevector theory, ETEP, vol.8, issue.4, 1998.

. Stincescu, . Viarouge, and K. Cros, A general approach of space and time harmonies interactions in induction motors, International Conference on Electric Machines and Drives, pp.366-368, 1999.

A. Toliyat, A methode for dynamic and detection of dynamic airgap eccentricity in synchronous machines, IEEE, 1997.

A. Toliyat, A novel method for modeling dynamic airgap eccentricity in synchronous machines based on modified winding function theory, IEEE Transactions on Energy Conversion, vol.13, issue.2, pp.156-162, 1998.

A. Toliyat, Simulation and detection of dynamic air-gap eccentricity in salient-pole synchronous machines, IEEE Transactions on Industry Applications, vol.35, issue.1, pp.86-93, 1999.
DOI : 10.1109/28.740849

A. Toliyat and P. , A method for dynamic simulation of air-gap eccentricity in induction machines, IEEE Transactions on Industry Applications, vol.32, issue.4, pp.910-918, 1996.
DOI : 10.1109/28.511649

L. Toliyat, Transient analysis of cage induction machines under stator, rotor bar and end ring faults, IEEE Transactions on Energy Conversion, vol.10, issue.2, pp.241-247, 1995.
DOI : 10.1109/60.391888

L. Toliyat and W. , Analysis of a concentrated winding induction machine for adjustable speed drive applications. I. Motor analysis, IEEE Transactions on Energy Conversion, vol.6, issue.4, pp.679-683, 1991.
DOI : 10.1109/60.103641

W. Toliyat and L. , Analysis and simulation of five-phase synchronous reluctance machines including third harmonic of airgap MMF, IEEE Transactions on Industry Applications, vol.34, issue.2, pp.332-339, 1998.
DOI : 10.1109/28.663476

B. Verma, Determination of radial-forces in relation to noise and vibration problems of squirrel-cage induction motors, IEEE Transactions on Energy Conversion, vol.9, issue.2, pp.404-412, 1994.
DOI : 10.1109/60.300130

F. Vernet, F. Héliodore, J. L. Thomas, and S. Poullain, Tensorial analysis of electrical machine: A modeling tool for electro-mechanical active filtering and diagnosis, ICEM'02, pp.xx-xx, 2002.

F. Vernet, F. Héliodore, J. L. Thomas, and S. Poullain, Space harmonies in electrical machines: Extended state-space model and kalman filter, CCA-03, pp.xx-xx, 2003.

A. Zakaria and S. , A novel double-circuit-rotor balanced induction motor for improved slip-energy recovery drive performance. I. Modeling and simulation, IEEE Transactions on Energy Conversion, vol.11, issue.3, pp.556-569, 1996.
DOI : 10.1109/60.537007