R. Microsystem, 0,8 µm CMOS Process Parameters

H. Baltes, D. Moser, R. Lenggenhager, O. Brand, and G. Watchutka, Thermomechanical Microtransducers by CMOS technologiy combined with micromachining, MICRO SYSTEM Technologies 91, R. Krahn et H.Reichl, 1991.

O. Paul and O. Brand, Micromachined thermally based CMOS microsensors, Proceedings of the IEEE, pp.1660-1678, 1998.

]. C. Bar03, Y. Barthod, C. Teisseyre, G. Géhin, and . Gautier, Resonant force sensor using a PLL electronic, pp.143-150, 2003.

H. Blanchard, F. De-montmollin, J. Hubin, and R. S. Popovic, Highly sensitive Hall sensor in CMOS technology, Sensors and Actuators A: Physical, vol.82, issue.1-3, pp.144-148, 2000.
DOI : 10.1016/S0924-4247(99)00329-5

]. R. Bla00b and G. Blanton-billoti, The challenge of MEMS TEST Chopper-stabilized amplifiers with a track-and-hold signal demodulator, International Test Conference (ITC), pp.1133-490, 1999.

]. M. Boe99, T. A. De-boer, and . Michalske, Accurate Method for Determining Adhesion of Cantilever Beams, Journal of Applied Physics, vol.86, pp.817-827, 1999.

M. Boutry, <title>Characterization of residual stress in metallic films on silicon with micromechanical devices</title>, Micromachining and Microfabrication Process Technology II, pp.46-55, 1996.
DOI : 10.1117/12.251239

]. A. Cas98, D. Castillejo, S. Veychard, J. M. Mir, B. Karam et al., Failure Mechanisms and Fault Classes for CMOS-Compatible Microelectromechanical Systems, IEEE Int. Test Conference, pp.541-550, 1998.

]. B. Cha01a, F. Charlot, S. Parrain, and B. Mir, Courtois "A self-testable CMOS thermopile-based infrared imager, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP'2001), pp.25-27, 2001.

B. Charlot, S. Mir, F. Parrain, and B. Courtois, Electrically induced stimuli for MEMS self-test", 19th VLSI test symposium, 2001.

]. B. Cha99, S. Charlot, E. F. Mir, M. Cota, B. Lubaszewski et al., Fault simulation of MEMS using HDLs, Design, Test and Microfabrication of MEMS/MOEMS, pp.70-77, 1999.

P. B. Chu, J. T. Chen, R. Yeh, G. Lin, J. C. Huang et al., Controlled pulseetching with xenon difluoride Solid State Sensors and Actuators, 1997. TRANSDUCERS '97 Chicago, International Conference on, pp.665-668, 1997.

B. Courtois, H. Delori, J. M. Karam, F. Paillotin, and K. Torki, CMP services: basic principles and developments, 2nd International Conference on ASIC, pp.417-420, 1996.
DOI : 10.1109/ICASIC.1996.562841
URL : https://hal.archives-ouvertes.fr/hal-00007918

]. A. Cou98, D. Castillejo, S. Veychard, J. M. Mir, B. Karam et al., Failure Mechanisms and Fault Classes for CMOS-Compatible Microetectromechanical Systems, IEEE International Test Conference (ITC), pp.541-550, 1998.

P. Czarnecki, X. Rottenberg, P. Soussan, P. Nolmans, P. Ekkels et al., New insights into charging in capacitive RF MEMS switches, 2008 IEEE International Reliability Physics Symposium, pp.496-505, 2008.
DOI : 10.1109/RELPHY.2008.4558936

]. G. Fed96, S. Fedder, M. L. Santhanam, S. C. Reed, D. F. Eagle et al., Laminated high-aspect-ratio microstructures in a conventional CMOS process, Sensors and Actuators A 57, pp.103-110, 1996.

G. K. Fedder, Integrated microelectromechanical systems in conventional CMOS Circuits and Systems, 1997. ISCAS '97, Proceedings of 1997 IEEE International Symposium on, pp.2821-2824, 1997.

T. B. Gabrielson, Mechanical-thermal noise in micromachined acoustic and vibration sensors, IEEE Transactions on Electron Devices, vol.40, issue.5, p.903, 1993.
DOI : 10.1109/16.210197

[. Zhang-;-huikai-xie-;-de-rosset, L. E. Fedder, and G. K. , A lateral capacitive CMOS accelerometer with structural curl compensation, Micro Electro Mechanical Systems MEMS '99. Twelfth IEEE International Conference on, pp.606-611, 1999.

M. Graf, D. Barrettino, M. Zimmermann, A. Hierlemann, H. Baltes et al., CMOS Monolithic Metal???Oxide Sensor System Comprising a Microhotplate and Associated Circuitry, IEEE Sensors Journal, vol.4, issue.1, pp.9-16, 2004.
DOI : 10.1109/JSEN.2003.820367

J. A. Harley and T. W. Kenny, 1/f Noise Considerations for the Design and Process Optimization of Piezoresistive Cantilevers, Journal of Microelectromechanical Systems, vol.9, p.2, 2000.

E. Hoffman, B. Warneke, E. Kruglick, J. Weigold, and K. S. Pister, 3D structures with piezoresistive sensors in standard CMOS, Proceedings IEEE Micro Electro Mechanical Systems. 1995, p.288, 1995.
DOI : 10.1109/MEMSYS.1995.472608

]. J. Hol01 and . Holman, Heat Transfer, 2001.

]. N. Hos00, J. Hossain, B. Ju, K. S. Warneke, and . Pister, Characterization of the Young's Modulus of CMOS Thin Films", symposium on Mechanical Properties of Structural Films, 2000.

M. Slamani and B. Kaminska, Multifrequency testability analysis for analog circuits, Proceedings of IEEE VLSI Test Symposium, 1994.
DOI : 10.1109/VTEST.1994.292334

]. K. Kam97, B. Arabi, and . Kaminska, Oscillation Built?In Self Test (OBIST) Scheme for Functional and Structural Testing of Analog and Mixed?Signal Integrated Circuits, International Test Conference (ITC), pp.786-795, 1997.

J. M. Karam and B. Courtois, From the MEMS idea to the MEMS product: CAD and foundries, Wescon/96, pp.73-78, 1996.
DOI : 10.1109/WESCON.1996.553966
URL : https://hal.archives-ouvertes.fr/hal-00007922

]. H. Ker98 and . Kerkhoff, Testing of microsystems, Microsystem Symposium, pp.27-36, 1998.

A. Kolpekwar, C. Kellen, and R. D. Blanton, MEMS fault model generation using CARAMEL, Proceedings International Test Conference 1998 (IEEE Cat. No.98CH36270), p.557, 1998.
DOI : 10.1109/TEST.1998.743199

[. Lee and G. Cho, Monte Carlo based time-domain Hspice noise simulation for CSA-CRRC circuit, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.505, issue.1-2, pp.328-333, 2003.
DOI : 10.1016/S0168-9002(03)01090-8

. Leu97, A. M. Leung, J. Jones, E. Czyzewska, J. Chen et al., Micromachined accelerometer with no proof mass, Electron Devices Meeting, 1997. IEDM '97. Technical Digest., International, pp.899-902, 1997.

]. A. Leu98, J. Leung, E. Jones, J. Czyzewska, B. Chen et al., Micromachined accelerometer based on convection heat transfer " ; IEEE MEMS'98; Heidelberg-Germany, pp.25-29, 1998.

]. F. Mai03, A. Mailly, A. Giani, R. Martinez, P. Bonnot et al., Micromachined thermal accelerometer, Sens. Actuators A, vol.103, issue.3, pp.359-363, 2003.

. Mak05, J. C. Van-der-meer, F. R. Riedijk, E. Van-kampen, K. A. Makinwa et al., A fully integrated CMOS Hall sensor with a 3 Solid-State Circuits Conference, Digest of Technical Papers. ISSCC. 2005 IEEE International, pp.246-247, 2005.

]. V. Mil98a, E. Milanovi, N. Bowen, J. Tea, B. Suehle et al., Convection-based accelerometer and tilt sensor implemented in standard CMOS, International Mechanical Engineering Conference and Exposition, MEMS Symposia, 1998.

]. S. Mil98b, M. S. Miller, G. Rodgers, J. Lavigne, P. Sniegowski et al., Failure Modes in Surface Micromachined MicroElectroMechanical Actuators, IEEE International Reliability Physics Symposium (IRPS, pp.17-25, 1998.

]. S. Mir99, B. Mir, B. Charlot, and . Courtois, Extending fault-based testing to MEMS, European Test Workshop (ETW), pp.25-28, 1999.

]. P. Neu04, T. Neuzil, and . Mei, A method of suppressing self-heating signal of bolometers, IEEE Sensors Journal, vol.4, issue.2, 2004.

J. M. Paret, Etude et mise au point de la méthodologie de conception et de fabrication collective de microsystèmes sur silicium, Thèse de doctorat, Institut National Polytechnique de Grenoble (INPG), 1997.

]. F. Par02, B. Parrain, N. Charlot, B. Galy, and . Courtois, A CMOS compatible micromachined tactile fingerprint sensor, Test, Integration, and Packaging of MEMS/MOEMS (DTIP'02), pp.6-8, 2002.

]. A. Per97, M. Perkins, C. D. Zwolinski, B. R. Chalk, and . Wilkins, Fault Modeling and Simulation Using VHDL- AMS, Analog Integrated Circuits and Signal Processing, vol.16, pp.141-155, 1998.

]. K. Pet82 and . Petersen, Silicon As Mechanical Material, Proc. of the IEEE, 1982.

]. R. Pop01, Z. Popovic, D. Randjelovic, and . Manic, Integrated Hall-effect magnetic sensors, Sensors and Actuators A: Physical, pp.46-50, 2001.

]. R. Rei01, R. Reichenbach, A. M. Rosing, A. P. Richardson, and . Dorey, Finite Element Analysis to Support Component Level Fault Modelling for MEMS, Design, Test, Integration, and Packaging of MEMS/MOEMS, DTIP, 2001.

R. Rosing, A. M. Richardson, and A. P. Dorey, A Fault Simulation Methodology for MEMS, Design Automation and Test in Europe, 2000.

D. Sabuncuoglu-tezcan, S. Eminoglu, O. Sevket-akar, and T. Akin, A low cost uncooled infrared microbolometer focal plane array using the CMOS n-well layer, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090), pp.566-569, 2001.
DOI : 10.1109/MEMSYS.2001.906604

]. A. Sch01, U. Schaufelbuehl, C. Münch, O. Menolfi, O. Brand et al., 256-Pixel CMOS- Integrated Thermoelectric Infared Sensor Array, proc. MEMS, p.200203, 2001.

M. Schneider, S. Kawahito, Y. Tadokoro, and H. Baltes, High sensitivity CMOS microfluxgate sensor, International Electron Devices Meeting. IEDM Technical Digest, pp.907-910, 1997.
DOI : 10.1109/IEDM.1997.650528

]. H. Sei87 and . Seidel, The mechanism of anisotropic silicon etching and its relevance for micromachining, Proc. 4

. Int, Conference on Solid-state Sensors and Actuators (Tranducers'87), pp.120-125, 2005.

]. S. Sen01 and . Senturia, Microsystem Design, Norwell, 2001.

B. Shen, W. Allegretto, M. Hu, and A. M. Robinson, CMOS micromachined cantilever-in-cantilever devices with magnetic actuation, IEEE Electron Device Letters, vol.17, issue.7, pp.372-374, 1996.
DOI : 10.1109/55.506371

. Spe02, W. M. Van-spengen, R. Puers, R. Mertens, and I. De-wolf, Experimental characterization of stiction due to charging in RF MEMS, Electron Devices Meeting, 2002. IEDM '02. Digest. International, pp.901-904, 2002.

W. M. Van-spengen, R. Puers, and I. De-wolf, The prediction of stiction failures in MEMS, Device and Materials Reliability, pp.167-172, 2003.
DOI : 10.1109/TDMR.2003.820295

R. Sunier, T. Vancura, Y. Li, K. Kirstein, H. Baltes et al., Resonant magnetic field sensor with frequency output, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005., pp.1098-1107, 2006.
DOI : 10.1109/MEMSYS.2005.1453936

]. R. Tan97, G. Tangelder, H. Diemel, and . Kerkhoff, Smart Sensor System Application: An Integrated Compass, European Design and Test Conference, pp.195-199, 1997.

N. H. Tea97-]-tea, V. Milanovic, C. A. Zincke, J. S. Suehle, M. Gaitan et al., Hybrid postprocessing etching for CMOS-compatible MEMS, Microelectromechanical Systems, pp.363-372, 1997.

D. S. Tezcan, S. Eminoglu, and T. Akin, A low-cost uncooled infrared microbolometer detector in standard CMOS technology, IEEE Transactions on Electron Devices, vol.50, issue.2, pp.494-502, 2003.
DOI : 10.1109/TED.2002.807453

H. Verhoeven and J. Huijsing, Design of thermal sigma-delta modulators for smart thermal sensors, Proceedings of ISCAS'95, International Symposium on Circuits and Systems, pp.179-82, 1995.
DOI : 10.1109/ISCAS.1995.521480

D. Wolf and I. , Reliability of MEMS Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSime 7th International Conference on, pp.1-6, 2006.