. Aaron, Second phase dissolution, Metallurgical Transactions, vol.18, issue.2, pp.393-408, 1971.
DOI : 10.1007/BF02663326

M. Abe and A. Fujiwara, Nucleation of precipitates in Al-Zn-Mg alloys, Materials Science and Engineering, vol.22, pp.61-70, 1976.

P. Auger, J. Raynal, M. Bernole, and R. Graf, Etude aux rayons X et par microscopie électronique de la précipitation dans les alliages Al-Zn-Mg et Al-Zn-Mg-Cu revenus entre 100 et 300°C, Mémoires Scientifiques Revue de Métallurgie, issue.9, pp.557-568, 1974.

J. Auld and . Smck, The structure of the metastable ?' phase in aluminium-zinc-magnesium alloys, Journal of the Australian Institute of Metals, vol.19, pp.194-201, 1974.

A. Benedetti, P. Cabot, J. Garrido, and A. Moreira, Effect of welding on the microstructure and electrochemical corrosion of Al???Zn???Mg???Fe alloys, Electrochimica Acta, vol.45, issue.14, pp.2187-2195, 2000.
DOI : 10.1016/S0013-4686(00)00319-4

L. Berg, J. Gjønnes, V. Hansen, X. Li, M. Knutson-wedel et al., GP-zones in Al???Zn???Mg alloys and their role in artificial aging, Acta Materialia, vol.49, issue.17, pp.3443-3451, 2001.
DOI : 10.1016/S1359-6454(01)00251-8

O. Blaschko, G. Ernst, P. Fratzl, M. Bernole, and P. Auger, A neutron scattering investigation of the early stages of guinier-preston zone formation in AlZnMg(Cu)-alloys, Acta Metallurgica, vol.30, issue.2, pp.547-552, 1982.
DOI : 10.1016/0001-6160(82)90235-8

S. Brenner, J. Kowalik, and . Ming-jian, FIM/atom probe analysis of a heat treated 7150 aluminum alloy, Surface Science, vol.246, issue.1-3, pp.210-217, 1991.
DOI : 10.1016/0039-6028(91)90417-Q

N. Danh, K. Rajan, and W. Wallace, A TEM study of microstructural changes during retrogression and reaging in 7075 aluminum, Metallurgical Transactions A, vol.28, issue.9, pp.1843-1850, 1983.
DOI : 10.1007/BF02645554

N. Danh, R. Krishna, and W. Wallace, Discussion of " Effect of retrogression and reaging treatments on the microstructure of Al-7075-T651, Metallurgical transactions A, vol.16, p.2068, 1985.

[. Ardo, A. Simensen, and J. Chrj, A structural investigation of multiple aging of Al-7 wt pct Zn-2.3 wt pct Mg, Metallurgical Transactions, vol.242, issue.10, pp.2413-2421, 1973.
DOI : 10.1007/BF02669384

[. Iasi, R. Adler, and P. , Calorimetric studies of 7000 series aluminium alloys : I. Matrix precipitate characterization of 7075, Metallurgical Transactions A, vol.8, pp.1177-1183, 1977.

A. Deschamps, A. Bigot, F. Livet, P. Auger, Y. Bréchet et al., A comparative study of precipitate composition and volume fraction in an Al???Zn???Mg alloy using tomographic atom probe and small-angle X-ray scattering, Philosophical Magazine A, vol.50, issue.10, pp.2391-2414, 2001.
DOI : 10.1016/0039-6028(92)91044-C

R. Ferragut, A. Somoza, and A. Tolley, Microstructural evolution of 7012 alloy during the early stages of artificial ageing, Acta Materialia, vol.47, issue.17, pp.4355-4364, 1999.
DOI : 10.1016/S1359-6454(99)00315-8

. García-cordovilla, Kinetics of retrogression in Al-Zn-Mg-(Cu) alloys, Metallurgical Transactions A, vol.24, issue.8, pp.2277-2280, 1990.
DOI : 10.1007/BF02647890

J. Gjønnes and C. J. Simensen, An electron microscope investigation of the microstructure in an aluminium-zinc-magnesium alloy, Acta Metallurgica, vol.18, issue.8, pp.881-890, 1970.
DOI : 10.1016/0001-6160(70)90016-7

D. Godard, Influences de la précipitation sur le comportement thermomécanique lors de la trempe d'un alliage Al-Zn-Mg, 1999.

P. Gomiero, A. Reeves, A. Pierre, F. Bley, F. Livet et al., An in-situ small-angle X-ray scattering (SAXS) study of precipitation in an Al-Zn-Mg-Cu alloy. Proceedings of the 4 th conference on Aluminum alloys: their physical and mechanical properties, pp.644-651, 1994.

R. Graf, The ageing of ternary aluminium-zinc-magnesium alloys, Journal of the Institute of Metals, vol.86, pp.535-536, 1956.

. Gueffroy, B. Gueffroy, and H. Löffler, On the reversion behaviour of an Al???Zn(4.5 at%)???Mg(2.0 at%) alloy, Physica Status Solidi (a), vol.65, issue.2, pp.585-590, 1981.
DOI : 10.1002/pssa.2210660221

. Gueffroy, B. Gueffroy, and H. Löffler, On the influence of the pre-ageing temperature on the reversion behaviour of an Al-4.5at%Zn-2.0at%Mg alloy, Crystal Research and Technology, vol.16, issue.9, pp.1079-1085, 1981.

P. Guyot and L. Cottignies, Precipitation kinetics, mechanical strength and electrical conductivity of AlZnMgCu alloys, Acta Materialia, vol.44, issue.10, pp.4161-4167, 1996.
DOI : 10.1016/S1359-6454(96)00033-X

J. Hilliard, The counting and sizing of particles in transmission microscopy, Transactions of the Metallurgical Society of AIME, vol.224, pp.906-917, 1962.

R. Hwang and C. Chou, The study on microstructural and mechanical properties of weld heat affected zone of 7075-T651 aluminum alloy, Scripta Materialia, vol.38, issue.2, pp.215-221, 1998.
DOI : 10.1016/S1359-6462(97)00472-7

X. Jiang, B. Noble, B. Holme, G. Waterloo, and J. Tafto, Differential scanning calorimetry and electron diffraction investigation on low-temperature aging in Al-Zn-Mg alloys, Metallurgical and Materials Transactions A, vol.9, issue.222, pp.339-348, 2000.
DOI : 10.1007/s11661-000-0269-x

R. Kampmann and R. Wagner, Decomposition of alloys: first stages, pp.91-103, 1984.

P. Kelly, A. Jostsons, R. Blake, and J. Napier, The determination of foil thickness by scanning transmission electron microscopy, Physica Status Solidi (a), vol.24, issue.2, pp.771-780, 1975.
DOI : 10.1002/pssa.2210310251

H. Kim and S. Nam, Solidification cracking susceptibility of high strength aluminum alloy weldment, Scripta Materialia, vol.34, issue.7, pp.1139-1145, 1996.
DOI : 10.1016/1359-6462(95)00644-3

H. Kissinger, Reaction Kinetics in Differential Thermal Analysis, Analytical Chemistry, vol.29, issue.11, p.1702, 1957.
DOI : 10.1021/ac60131a045

T. Koppenall and D. Kuhlmann-wilsdorf, THE EFFECT OF PRESTRESSING ON THE STRENGTH OF NEUTRON???IRRADIATED COPPER SINGLE CRYSTALS, Applied Physics Letters, vol.4, issue.3, p.59, 1964.
DOI : 10.1063/1.1753962

W. Lacom, H. Desgischer, A. Zahra, and C. Zahra, Decomposition processes in an Al-5%Zn-1%Mg alloy. Part III : Reversion of GP-zones, Zeitschrift für Metallkunde, vol.73, issue.12, pp.781-785, 1982.

J. Langer and A. Schwarz, Kinetics of nucleation in near-critical fluids, Physical Review A, vol.21, issue.3, pp.948-958, 1980.
DOI : 10.1103/PhysRevA.21.948

M. Lech-grega-]-lech-grega, S. Hawrylkiewicz, M. Richert, and W. Szyma?ski, Structural parameters of 7020 alloy after heat treatment simulating the welding process, Materials Characterization, vol.46, issue.2-3, pp.251-257, 2001.
DOI : 10.1016/S1044-5803(01)00133-4

. Lendvai, Dissolution of second phases in an Al???Zn???Mg alloy investigated by calorimetric method, Scripta Metallurgica, vol.13, issue.7, pp.593-594, 1979.
DOI : 10.1016/0036-9748(79)90115-7

X. Li, V. Hansen, J. Gjønnes, and L. Wallenberg, HREM study and structure modeling of the ????? phase, the hardening precipitates in commercial Al???Zn???Mg alloys, Acta Materialia, vol.47, issue.9, pp.2651-2659, 1999.
DOI : 10.1016/S1359-6454(99)00138-X

X. Li and M. Starink, Analysis of Precipitation and Dissolution in Overaged 7xxx Aluminium Alloys using DSC, Materials Science Forum, vol.331, issue.337, pp.331-337, 2000.
DOI : 10.4028/www.scientific.net/MSF.331-337.1071

I. Lifshitz and V. Slyozov, The kinetics of precipitation from supersaturated solid solutions, Journal of Physics and Chemistry of Solids, vol.19, issue.1-2, p.35, 1961.
DOI : 10.1016/0022-3697(61)90054-3

G. Lorimer and R. Nicholson, Further results on the nucleation of precipitates in the Al???Zn???Mg system, Acta Metallurgica, vol.14, issue.8, p.1009, 1966.
DOI : 10.1016/0001-6160(66)90229-X

Z. Lu, W. Evans, and J. Parker, Simulation of microstructure and liquation cracking in 7017 aluminium alloy, Materials Science and Engineering: A, vol.220, issue.1-2, pp.1-7, 1996.
DOI : 10.1016/S0921-5093(96)10458-5

S. Maloney, K. Hono, I. Polmear, and S. Ringer, The chemistry of precipitates in an aged Al-2.1Zn-1.7Mg at.% alloy, Scripta Materialia, vol.41, issue.10, pp.1031-1038, 1999.
DOI : 10.1016/S1359-6462(99)00253-5

C. Mayer, Optimisation du soudage bord à bord par faisceau laser CO 2 de tôles d'alliages Al- Mg: étude de la microstructure et du comportement mécanique des soudures, 1996.

L. Mondolfo, N. Gjostein, and D. Lewinson, Structural changes during the ageing of an Al- Zn-Mg alloy, Transactions AIME, vol.206, pp.1378-1385, 1956.

A. Mukhopadhyay, Q. Yang, and S. Singh, The influence of zirconium on the early stages of aging of a ternary Al???Zn???Mg alloy, Acta Metallurgica et Materialia, vol.42, issue.9, pp.3083-3091, 1994.
DOI : 10.1016/0956-7151(94)90406-5

O. Myhr, H. Fjaer, S. Klokkehaug, and E. Holm, Grong Ø; Kluken AO: Weldsim ? An advanced simulation model for aluminium welding, Proceedings of the 9 th International Conference on Computer Technology in Welding, 1999.

J. Park and A. Ardell, Microstructures of the commercial 7075 Al alloy in the T651 and T7 tempers, Metallurgical Transactions A, vol.88, issue.10, pp.1957-1965, 1983.
DOI : 10.1007/BF02662363

J. Park and A. Ardell, Effect of retrogression and reaging treatments on the microstructure of Ai-7075-T651, Metallurgical Transactions A, vol.33, issue.8, pp.1531-1543, 1984.
DOI : 10.1007/BF02657792

J. Park and A. Ardell, Precipitation at grain boundaries in the commercial alloy Al 7075, Acta Metallurgica, vol.34, issue.12, pp.2399-2409, 1986.
DOI : 10.1016/0001-6160(86)90143-4

J. Park, Influence of retrogression and reaging treatments on the strength and stress corrosion resistance of aluminium alloy 7075-T6, Materials Science and Engineering: A, vol.103, issue.2, pp.223-231, 1988.
DOI : 10.1016/0025-5416(88)90512-5

J. Park and A. Ardell, Correlation between microstructure and calorimetric behavior of aluminum alloy 7075 and Al???Zn???Mg alloys in various tempers, Materials Science and Engineering: A, vol.114, pp.197-203, 1989.
DOI : 10.1016/0921-5093(89)90859-9

R. Honeycombe and P. Hancock, Polmear IJ: Light alloys: metallurgy of the light metals, Metallurgy and Materials Science Series, 1995.

D. Porter and K. Easterling, Phase transformations in metals and alloys, 1981.
DOI : 10.1007/978-1-4899-3051-4

. Radomsky, M. Radomsky, O. Kabisch, H. Löffler, and J. Lendvai, On the decomposition behaviour of Al-4.5 at% Zn-2 to 3 at% Mg alloys during continuous heating, Journal of Materials Science, vol.67, issue.12, pp.2906-2912, 1979.
DOI : 10.1007/BF00611473

T. Russell, J. Lin, S. Spooner, and G. Wignall, Intercalibration of small-angle X-ray and neutron scattering data, Journal of Applied Crystallography, vol.21, issue.6, pp.629-638, 1988.
DOI : 10.1107/S0021889888004820

J. Staley, Quench factor analysis of aluminium alloys, Materials Science and Technology, vol.13, issue.11, pp.923-935, 1987.
DOI : 10.1007/BF02672287

K. Stiller, P. Warren, V. Hansen, J. Angenete, and J. Gjønnes, Investigation of precipitation in an Al???Zn???Mg alloy after two-step ageing treatment at 100?? and 150??C, Materials Science and Engineering: A, vol.270, issue.1, pp.55-63, 1999.
DOI : 10.1016/S0921-5093(99)00231-2

T. Takahashi, K. Hirayama, Y. Minamino, T. Yamane, and Y. Koizumi, Quaternary diffusion in 7000 aluminum alloys., Journal of Japan Institute of Light Metals, vol.50, issue.10, pp.499-504, 2000.
DOI : 10.2464/jilm.50.499

W. Thomas, E. Nicholas, E. Watts, and D. Staines, Friction Based Welding Technology for Aluminium, Materials Science Forum, vol.396, issue.402, pp.396-4021543, 2002.
DOI : 10.4028/www.scientific.net/MSF.396-402.1543

. Ungár, T. Ungár, J. Lendvai, and I. Kovács, Metastable phase diagram of the Al-Zn-Mg alloy system in the low concentration range of Zn and Mg. Aluminium 55, Jahrg, vol.10, pp.663-668, 1979.

R. Wagner and R. Kampmann, Homogeneous second phase precipitation Materials Science and Technology: a comprehensive treatment, 1991.

P. Warren, C. Grovenor, and J. Crompton, Field-ion microscope/atom-probe analysis of the effect of RRA heat treatment on the matrix strengthening precipitates in alloy Al-7150, Surface Science, vol.266, issue.1-3, pp.342-349, 1992.
DOI : 10.1016/0039-6028(92)91044-C

. Welding and . Brazing, Metals Handbook: Welding and Brazing, 1971.

A. Yamamoto, K. Minami, U. Ishihara, and H. Tsubakino, Calorimetric and Resistivity Study of Formation and Redissolution of Precipitates in 7050 Aluminum Alloy, Materials Transactions, JIM, vol.39, issue.1, pp.69-74, 1998.
DOI : 10.2320/matertrans1989.39.69