J. E. Bobrow, NC machine tool path generation from CSG part representations, Computer-Aided Design, vol.17, issue.2, pp.69-76, 1985.
DOI : 10.1016/0010-4485(85)90248-9

E. L. Bohez, Compensating for systematic errors in 5-axis NC machining, Computer-Aided Design, vol.34, issue.5, pp.391-403, 2002.
DOI : 10.1016/S0010-4485(01)00111-7

A. Brient, Etude de l'influence du processus de fabrication sur les performances des propulseurs marins : Approche multimétiers de l'usinage d'hélices, Thèse de Doctorat, 2004.

P. Broomhead and M. Edkins, Generating NC data at the machine tool for the manufacture of free-form surfaces, International Journal of Production Research, vol.4, issue.1, pp.1-14, 1986.
DOI : 10.1016/S0007-8506(07)60959-7

D. Brun-picard and F. Gerardin, Evolution des techniques de commande d'axes pour améliorer les performances en usinage grande vitesse, pp.16-17, 2000.

T. Cano, Etude du comportement cinématique des Machines Outils à Usinage Grande Vitesse 5 axes Sérielles, 2004.

H. Chanal, E. Duc, and P. Ray, A study of the impact of machine tool structure on machining processes, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.2-98, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.004

. Cheng, Real-time NURBS command generators for CNC servo controllers, International Journal of Machine Tools and Manufacture, vol.42, issue.7, pp.801-813, 2002.
DOI : 10.1016/S0890-6955(02)00015-9

V. Cheutet, C. E. Catalano, J. P. Pernot, B. Falcidieno, F. Giannini et al., 3D sketching for aesthetic design using fully free-form deformation features, Computers & Graphics, vol.29, issue.6, pp.916-930, 2005.
DOI : 10.1016/j.cag.2005.09.009
URL : https://hal.archives-ouvertes.fr/hal-01408936

C. Chiou and Y. Lee, A machining potential field approach to tool path generation for multi-axis sculptured surface machining, Computer-Aided Design, vol.34, issue.5, pp.357-371, 2002.
DOI : 10.1016/S0010-4485(01)00102-6

C. Chiou and Y. Lee, Swept surface determination for five-axis numerical control machining, International Journal of Machine Tools and Manufacture, vol.42, issue.14, pp.1497-1507, 2002.
DOI : 10.1016/S0890-6955(02)00110-4

H. D. Cho, Y. T. Jun, and M. Y. Yang, Five-axis CNC milling for effective machining of sculptured surfaces, International Journal of Production Research, vol.31, issue.11, pp.2559-2573, 1993.
DOI : 10.1115/1.3188728

F. Colas, J. Dieulot, and P. Barre, Influence de différentes structures de commande sur le compromis temps/vibration -Application à un robot cartésien, pp.31-40, 2006.

P. Dépincé and J. Hascoët, Active integration of tool deflection effects in end milling. Part 2. Compensation of tool deflection, International Journal of Machine Tools and Manufacture, vol.46, pp.1-12, 2006.

. Ding, Oriented bounding box and octree based global interference detection in 5-axis machining of free-form surfaces, Computer-Aided Design, vol.36, issue.13, pp.1281-1294, 2004.
DOI : 10.1016/S0010-4485(03)00109-X

. Du, Formulating swept profiles for five-axis tool motions, International Journal of Machine Tools and Manufacture, vol.45, issue.7-8, pp.7-8, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.006

A. Dugas, CFAO et UGV -Simulation d'usinage de formes complexes, 2002.

A. Dugas, J. Lee, and J. Hascoët, High Speed Milling?Solid simulation and machine limits, Integrated Design and Manufacturing in Mechanical Engineering, pp.287-294, 2002.

D. Dumur, P. Boucher, and J. Roder, Advantages of an Open Architecture Structure for the Design of Predictive Controllers for Motor Drives, CIRP Annals - Manufacturing Technology, vol.47, issue.1, pp.291-294, 1998.
DOI : 10.1016/S0007-8506(07)62836-4

A. Elnagar and A. Hussein, On optimal constrained trajectory planning in 3D environments, Robotics and Autonomous Systems, vol.33, issue.4, pp.195-206, 2000.
DOI : 10.1016/S0921-8890(00)00095-6

K. Erkorkmaz and Y. Altintas, High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation, International Journal of Machine Tools and Manufacture, vol.41, issue.9, pp.1323-1345, 2001.
DOI : 10.1016/S0890-6955(01)00002-5

P. Fallböhmer, C. A. Rodriguez, T. Özel, and A. Altan, High-speed machining of cast iron and alloy steels for die and mold manufacturing, Journal of Materials Processing Technology, vol.98, issue.1, pp.104-115, 2000.
DOI : 10.1016/S0924-0136(99)00311-8

R. T. Farouki, Y. Tsai, and C. S. Wilson, Physical constraints on feedrates and feed accelerations along curved tool paths, Computer Aided Geometric Design, vol.17, issue.4, pp.337-359, 2000.
DOI : 10.1016/S0167-8396(00)00004-2

R. V. Fleisig and A. D. Spence, A constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining, Computer-Aided Design, vol.33, issue.1, pp.1-15, 2001.
DOI : 10.1016/S0010-4485(00)00049-X

. Garg, Optimization techniques applied to multiple manipulators for path planning and torque minimization, Engineering Applications of Artificial Intelligence, vol.15, issue.3-4, pp.3-4, 2002.
DOI : 10.1016/S0952-1976(02)00067-2

. Ho, Real-time interference analysis between a tool and an environment, Computer-Aided Design, vol.33, issue.13, pp.935-947, 2001.
DOI : 10.1016/S0010-4485(00)00117-2

M. Ho, Y. Hwang, and C. Hu, Five-axis tool orientation smoothing using quaternion interpolation algorithm, International Journal of Machine Tools and Manufacture, vol.43, issue.12, pp.1259-1267, 2003.
DOI : 10.1016/S0890-6955(03)00107-X

O. Ilushin, G. Elber, D. Halperin, R. Wein, and M. Kim, Precise global collision detection in multi-axis NC-machining, Computer-Aided Design, vol.37, issue.9, pp.909-920, 2005.
DOI : 10.1016/j.cad.2004.09.018

. Jerard, Sculptured Surfaces - Methods for Detecting Errors in Numerically Controlled Machining of Sculptured Surfaces, IEEE Computer Graphics and Applications, pp.26-39, 1989.

. Jun, Optimizing tool orientations for 5-axis machining by configuration-space search method, Computer-Aided Design, vol.35, issue.6, pp.549-566, 2003.
DOI : 10.1016/S0010-4485(02)00077-5

T. Kim and S. Sarma, Toolpath generation along directions of maximum kinematic performance; a first cut at machine-optimal paths, Computer-Aided Design, vol.34, issue.6, pp.453-468, 2002.
DOI : 10.1016/S0010-4485(01)00116-6

J. M. Langeron, E. Duc, C. Lartigue, and P. Bourdet, A new format for 5-axis tool path computation, using Bspline curves, Computer-Aided Design, vol.36, issue.12, pp.1219-1229, 2004.
DOI : 10.1016/j.cad.2003.12.002

C. Lartigue, Processus de réalisation des pièces de forme complexe Une approche géométrique , de la conception à la mesure, Habilitation à Diriger les Recherches, 2001.

. Lartigue, High-performance NC for High-Speed Machining by means of polynomial trajectories, Annales du CIRP, vol.53, pp.1-317, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00861903

A. Larue, Prise en compte des déformations d'un outil dans le calcul de trajectoires d'usinage en fraisage de profil, Thèse de Doctorat, 2003.

B. Lauwers, P. Dejonghe, and J. P. Kruth, Optimal and collision free tool posture in five-axis machining through the tight integration of tool path generation and machine simulation, Computer-Aided Design, vol.35, issue.5, pp.421-432, 2003.
DOI : 10.1016/S0010-4485(02)00045-3

. Lavernhe, Kinematical performances in 5-axis machining, Congrès Integrated Design and Manufacturing in Mechanical Engineering, CDROM n° P082, pp.17-19, 2006.

. Lavernhe, Intégration de contraintes cinématiques pour le calcul de l'orientation optimisée de l'axe de l'outil en usinage 5 axes, Assises Machine Outil et Usinage à Grande Vitesse, pp.59-69, 2006.

. Lavernhe, Model for performance prediction in multi-axis machining, CIRP -2nd international conference on High Performance Cutting 12 et 13 Juin, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00999720

Y. Lee, Admissible tool orientation control of gouging avoidance for 5-axis complex surface machining, Computer-Aided Design, vol.29, issue.7, pp.507-521, 1997.
DOI : 10.1016/S0010-4485(97)00002-X

Y. Lee, Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining, Computer-Aided Design, vol.30, issue.7, pp.559-570, 1998.
DOI : 10.1016/S0010-4485(98)00822-7

. Lee, Machined surface error analysis for 5-axis machining, International Journal of Production Research, vol.28, issue.1, pp.111-135, 1996.
DOI : 10.1115/1.3188728

. Lee, Surface interrogation and machining strip evaluation for 5-axis CNC die and mold machining, International Journal of Production Research, vol.35, issue.1, pp.225-252, 1997.
DOI : 10.1080/002075497196064

. Liu, Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics, International Journal of Machine Tools and Manufacture, vol.45, issue.4-5, pp.433-444, 2005.
DOI : 10.1016/j.ijmachtools.2004.09.009

M. Monreal and C. A. Rodriguez, Influence of tool path strategy on the cycle time of high-speed milling, Computer-Aided Design, vol.35, issue.4, pp.395-401, 2003.
DOI : 10.1016/S0010-4485(02)00060-X

M. Müller, G. Erds, and P. Xirouchakis, High accuracy spline interpolation for 5-axis machining, Computer-Aided Design, vol.36, issue.13, pp.1379-1393, 2004.
DOI : 10.1016/j.cad.2004.02.007

M. Munlin, S. S. Makhanov, and E. L. Bohez, Optimization of rotations of a five-axis milling machine near stationary points, Computer-Aided Design, vol.36, issue.12, pp.1117-1128, 2004.
DOI : 10.1016/S0010-4485(03)00164-7

. Nam, A study on a generalized parametric interpolator with real-time jerk-limited acceleration, Computer-Aided Design, vol.36, issue.1, pp.27-36, 2004.
DOI : 10.1016/S0010-4485(03)00066-6

V. Pateloup, E. Duc, and P. Ray, Corner optimization for pocket machining, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, pp.12-13, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.011

]. S. Radzevich, A closed-form solution to the problem of optimal tool-path generation for sculptured surface machining on multi-axis NC machine, Mathematical and Computer Modelling, vol.43, issue.3-4, pp.3-4, 2006.
DOI : 10.1016/j.mcm.2004.08.014

R. Ramesh, M. A. Mannan, and A. N. Poo, Error compensation in machine tools ??? a review, International Journal of Machine Tools and Manufacture, vol.40, issue.9, pp.1235-1256, 2000.
DOI : 10.1016/S0890-6955(00)00009-2

R. Ramesh, M. A. Mannan, and A. N. Poo, Error compensation in machine tools ??? a review, International Journal of Machine Tools and Manufacture, vol.40, issue.9, pp.1257-1284, 2000.
DOI : 10.1016/S0890-6955(00)00010-9

A. Rao and R. Sarma, On local gouging in five-axis sculptured surface machining using flat-end tools, Computer-Aided Design, vol.32, issue.7, pp.409-420, 2000.
DOI : 10.1016/S0010-4485(99)00105-0

H. Schulz and T. Moriwaki, High-speed Machining, CIRP Annals - Manufacturing Technology, vol.41, issue.2, pp.637-643, 1992.
DOI : 10.1016/S0007-8506(07)63250-8

. Siemens, Description of Functions -Sinumerik 840D, 2004.

. Siemens, Description of Functions -Sinumerik 840D/840Di/810D -Special Functions, 2004.

. Siemens and . Siemens, Programming Guide -Sinumerik 840D, 2004.

. Siemens, Function Description -Simodrive 611 digital -Firmware drive, 2004.

K. Sørby, Inverse kinematics of five-axis machines near singular configurations, International Journal of Machine Tools and Manufacture, en cours d'impression, disponible en ligne, 2006.

M. Susanu, D. Dumur, C. Tournier, and C. Lartigue, Loi de commande prédictive pour le positionnement des axes d'une machine outil à architecture ouverte, pp.183-192, 2004.

M. Susanu, Commande prédictive hiérarchisée pour le positionnement des axes de machineoutil à architecture ouverte, Thèse de Doctorat, p.5, 2005.

M. Terrier, Optimisation du processus de fabrication en usinage à grande vitesse sur machinesoutils à structure parallèle, 2005.

. Timar, Algorithms for time???optimal control of CNC machines along curved tool paths, Robotics and Computer-Integrated Manufacturing, vol.21, issue.1, pp.37-53, 2005.
DOI : 10.1016/j.rcim.2004.05.004

C. Tournier, Contribution à la conception des formes complexes : La surface d'usinage en fraisage 5 axes isocrête, Thèse de Doctorat, 2001.

C. Tournier, E. Duc, C. Lartigue, and A. Contri, The Concept of the Machining Surface in 5-Axis Milling of Free-form Surfaces, pp.279-286, 2000.
DOI : 10.1007/978-94-015-9966-5_33
URL : https://hal.archives-ouvertes.fr/hal-01223061

C. Tournier and E. Duc, Iso-scallop tool path generation in 5-axis milling, The International Journal of Advanced Manufacturing Technology, vol.29, issue.9-10, pp.9-10, 2005.
DOI : 10.1007/s00170-003-2054-7
URL : https://hal.archives-ouvertes.fr/hal-01076659

C. Tournier, S. Lavernhe, and C. Lartigue, Optimisation en fraisage 5 axes grande vitesse, 4th International conference on Integrated Design and Production, CDROM n° 087, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01224463

C. Tournier, C. Castagnetti, S. Lavernhe, and F. Avellan, Tool path generation and post-processor issues in five-axis high speed machining of hydro turbine blades, The Fifth International Conference on High Speed Machining, pp.500-510, 2006.

A. Warkentin, F. Ismail, and S. Bedi, Comparison between multi-point and other 5-axis tool positioning strategies, International Journal of Machine Tools and Manufacture, vol.40, issue.2, pp.185-208, 2000.
DOI : 10.1016/S0890-6955(99)00058-9

J. Yoon, H. Pottmann, and Y. Lee, Locally optimal cutting positions for 5-axis sculptured surface machining, Computer-Aided Design, vol.35, issue.1, pp.69-81, 2003.
DOI : 10.1016/S0010-4485(01)00176-2