Domaine de fonctionnement des outils coupants, Couple Outil-Matière, partie 7: Application à la technologie de perçage dans le plein; NF E66, p.pp: [Altintas, 1998. ,
Mechanics and Dynamics of Ball End Milling, Journal of Manufacturing Science and Engineering, vol.120, issue.4, pp.684-692, 1998. ,
DOI : 10.1115/1.2830207
Manufacturing Automation, pp.0-521, 2000. ,
Development of a Mixture Supply System for Machining with Minimal Quantity Lubrication, CIRP Annals - Manufacturing Technology, vol.51, issue.1, pp.289-292, 2002. ,
DOI : 10.1016/S0007-8506(07)61519-4
Why dry machining?, Manufacturing Engineering, pp.33-36, 1995. ,
The mechanisms of bell mouth formation in gundrilling when the drill rotates and the workpiece is stationary. Part I: the first stage of drill entrance, International Journal of Machine Tools and Manufacture, vol.42, issue.10, pp.42-1135, 2002. ,
DOI : 10.1016/S0890-6955(02)00050-0
Ultrasonic-assisted drilling of Inconel 738-LC, International Journal of Machine Tools and Manufacture, vol.47, issue.7-8, pp.1027-1033, 2007. ,
DOI : 10.1016/j.ijmachtools.2006.10.007
Process-independent force caracterization for metal-cutting simulation, Journal of Engineering for Industry, vol.119, pp.86-94, 1997. ,
A chip formation based analytic force model for oblique cutting, International Journal of Machine Tools and Manufacture, vol.42, issue.4, pp.529-538, 2002. ,
DOI : 10.1016/S0890-6955(01)00129-8
Développement d'un modèle d'effort de coupe applicable a des familles d'outils: cas du fraisage des aciers traités thermiquement, 2005. ,
Etude des vibrations auto-entretenues en coupe tridimensionnelle : nouvelle modélisation appliquée au tournage, Thèse de doctorat, 2007. ,
Identification of a friction model???Application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool, International Journal of Machine Tools and Manufacture, vol.48, issue.11, pp.1211-1223, 2008. ,
DOI : 10.1016/j.ijmachtools.2008.03.011
A calibration procedure for fundamental oblique cutting model coefficients based on a three dimensional mechanistic drilling force model., Transaction of NAMRI, SME, vol.25, pp.255-260, 1997. ,
Burr size reduction in drilling by ultrasonic assistance, Robotics and Computer-Integrated Manufacturing, pp.442-450, 2005. ,
Generic modelling of milling forces for CAD/CAM applications, International Journal of Machine Tools and Manufacture, vol.44, issue.1, pp.29-37, 2003. ,
DOI : 10.1016/j.ijmachtools.2003.08.013
Low-frequency modulation-assisted drilling using linear drives, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.1, issue.3, pp.321-330, 2002. ,
DOI : 10.1243/0954405021519997
Influence des conditions opératoires sur le procédé de perçage : application aux structures mécano-soudées en acier bas carbone, Thèse de doctorat, ENSAM, 2006. ,
Modélisation semi-analytique par approche énergétique du procédé de perçage de matériaux monolithiques, Thèse de doctorat, 1999. ,
Investigation of chip in vibration drilling, International Journal of Machine Tools and Manufacture, vol.38, issue.3, pp.165-176, 1999. ,
DOI : 10.1016/S0890-6955(97)00047-3
A Dual-Mechanism Approach to the Prediction of Machining Forces, Part 1: Model Development, Journal of Engineering for Industry, vol.117, issue.4, pp.526-542, 1995. ,
DOI : 10.1115/1.2803530
Dynamics of Initial Penetration in Drilling: Part 1???Mechanistic Model for Dynamic Forces, Journal of Manufacturing Science and Engineering, vol.127, issue.2, pp.280-288, 2004. ,
DOI : 10.1115/1.1852569
The determination of ploughing force and its influence on material properties in metal cutting, Journal of Materials Processing Technology, vol.148, issue.3, pp.368-375, 2004. ,
DOI : 10.1016/j.jmatprotec.2004.02.052
Etudes des méthodes de construction et d'analyse des modèles dynamiques de processus technologiques d'usinage par la coupe, Thèse de doctorat, 1996. ,
Approche de la validation expérimentale des simulations numériques de la coupe avec prise en compte des phénomènes locaux à l'arête de l'outil, Thèse de doctorat, Ecole Centrale de Nantes, 1996. ,
Extracting cutting force coefficients from drilling experiments, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.387-396, 2006. ,
DOI : 10.1016/j.ijmachtools.2005.05.016
A study on combined vibration drilling by ultrasonic and low frequency vibrations for hard and brittle materials, Precision engineering, pp.196-205, 1998. ,
Computer aided cutting process parameter selection for high speed milling, Journal of Materials Processing Technology, vol.61, issue.1-2, pp.219-224, 1996. ,
DOI : 10.1016/0924-0136(96)02490-9
Contribution à la modélisation et à l'industrialisation du perçage vibratoire, Thèse de doctorat, INPG, 2003. ,
Continuous chip formation in drilling, International Journal of Machine Tools and Manufacture, vol.45, issue.15, pp.1652-1658, 2005. ,
DOI : 10.1016/j.ijmachtools.2005.03.011
A comparison of model-based machining force control approaches, International Journal of Machine Tools and Manufacture, vol.44, issue.7-8, pp.733-748, 2004. ,
DOI : 10.1016/j.ijmachtools.2004.02.005
Evaluation des forces de coupe en fraisage grande vitesse, présenté à la conférence IDMME, 1998. ,
Comparatif de domaines de fonctionnement des forets Tivoly en perçage vibratoire, 1996. ,
Etude expérimentale du perçage vibratoire, 1996. ,
Etude expérimentale du perçage vibratoire, 1997. ,
Modelling of cutting forces in helical end milling using a predictive machining theory, International Journal of Mechanical Sciences, vol.43, issue.8, pp.1711-1730, 2001. ,
DOI : 10.1016/S0020-7403(01)00020-0
Numercial simulation of a turnig operation, présenté à la conférence International Conference on Improving Machine Tool Performance, 1944. ,
Basic mechanics of the metal-cutting process, Transasction of the ASME, Journal of Applied Mechanics, vol.66, pp.168-175, 1944. ,
Analyse de la coupe vibratoire à basse fréquence appliquée au percage, Mecanique et industrie, pp.181-188, 2002. ,
Etude du comportement du système «pièce-outil-machine» en régime de coupe vibratoire, Thèse de doctorat, ENSAM, 2002. ,
A semi-analytical model of non-linear vibrations in orthogonal cutting and experimental validation, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.3-4, 2006. ,
DOI : 10.1016/j.ijmachtools.2005.04.017
Ultrasonic application in drilling, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.633-639, 2004. ,
DOI : 10.1016/j.jmatprotec.2003.10.062
Low-Frequency Vibration Drilling of Titanium Alloy, JSME International Journal Series C, vol.49, issue.1, pp.76-82, 2006. ,
DOI : 10.1299/jsmec.49.76
Effects of Ultrasonic Vibration on Machining Accuracy in Microdrilling., Journal of the Japan Society for Precision Engineering, vol.62, issue.5, pp.210-216, 1996. ,
DOI : 10.2493/jjspe.62.676
Modelling machining processes with a view to their optimization, Robotics and Computer Integrated Manufacturing, pp.103-119, 1988. ,
Modelling the Vibratory Drilling Process to Foresee Cutting Parameters, CIRP Annals - Manufacturing Technology, vol.54, issue.1, 2005. ,
DOI : 10.1016/S0007-8506(07)60124-3
URL : https://hal.archives-ouvertes.fr/hal-00360103
Influence of the ploughing effect on the dynamic behaviour of the self-vibratory drilling head, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.385-388, 2008. ,
DOI : 10.1016/j.cirp.2008.03.101
URL : https://hal.archives-ouvertes.fr/hal-00275441
Etude et simulation des effets dynamiques de la coupe sur la stabilité de la coupe et la qualité géométrique de la surface usinée : application au fraisage de profil, 2003. ,
Thermal influence of cutting tool coatings, Journal of Materials Processing Technology, vol.159, issue.1, pp.119-124, 2005. ,
DOI : 10.1016/j.jmatprotec.2004.04.414
Influence of cutting edge preparation on the wear resistance in high speed dry gear hobbing, Wear, vol.261, issue.5-6, pp.505-512, 2006. ,
DOI : 10.1016/j.wear.2005.12.007
Chip section and cutting force model during milling operation, Annals of CIRP, vol.10, 1961. ,
Techniques modernes d'usinage, pp.91-972299, 1997. ,
The Effect of Tool Length on Stable Metal Removal Rate in High Speed Milling, CIRP Annals - Manufacturing Technology, vol.47, issue.1, pp.307-310, 1998. ,
DOI : 10.1016/S0007-8506(07)62839-X
Material characterization for metal cutting force modelling, Transaction of ASME, pp.210-219, 1989. ,
Study of a Novel Squeeze Film Damper and Vibration Generator, Journal of Tribology, vol.122, issue.1, pp.211-218, 2000. ,
DOI : 10.1115/1.555345
URL : https://hal.archives-ouvertes.fr/hal-00216130
Catalogue d'outils de perçage de la gamme Perfor, [Tlusty, 1981. ,
Basic Non-Linearity in Machining Chatter, CIRP Annals - Manufacturing Technology, vol.30, issue.1, pp.299-304, 1965. ,
DOI : 10.1016/S0007-8506(07)60946-9
Vibration of machine tools, Production Engineer, vol.43, issue.12, 1965. ,
DOI : 10.1049/tpe.1964.0084
A study of the influence of superimposed lowfrequency modulation on the drilling process, Precision Engineering, pp.1-9, 1998. ,
Static and dynamic cutting force analysis when high speed rough milling hardened steel, Materials & Design, vol.25, issue.1, pp.41-50, 2004. ,
DOI : 10.1016/S0261-3069(03)00160-2
Analytical Prediction of Three Dimensional Cutting Process???Part 1: Basic Cutting Model and Energy Approach, Journal of Engineering for Industry, vol.100, issue.2, pp.222-243, 1978. ,
DOI : 10.1115/1.3439413
Usinage de trous profonds (en russe), p.268, 1988. ,
A new dynamic model for drilling and reaming processes, International Journal of Machine Tools and Manufacture, vol.42, issue.2, pp.299-311, 2002. ,
DOI : 10.1016/S0890-6955(01)00102-X
Mechanical model for predicting thrust and torque in vibration drilling fibre-reinforced composite materials, International Journal of Machine Tools and Manufacture, vol.41, issue.5, pp.641-657, 2001. ,
DOI : 10.1016/S0890-6955(00)00105-X