]. H. Bibliographie-[-aar02, Aaronson : Mechanisms of the massive transformation, Metallurgical and Materials Transactions A, vol.33, issue.8, pp.2285-2297, 2002.

M. [. Allais, T. Bornert, D. Bretheau, and . Caldemaison, Experimental characterization of the local strain field in a heterogeneous elastoplastic material, Acta Metallurgica et Materialia, vol.42, issue.11, pp.423865-3880, 1994.
DOI : 10.1016/0956-7151(94)90452-9

. I. Aec-+-89-]-h, D. Aaronson, C. M. Eylon, M. Cooke, and F. H. Enomoto, Froes : The widmanstatten-start (ws) temperature, as affected by matrix grain size, in ti-6% al-4% v and in fe?c alloys, Scripta Metallurgica, vol.23, issue.3, pp.435-440, 1989.

P. [. Attwood, A fiducial grid for high-resolution metallography, Metallography, vol.9, issue.6, pp.483-501, 1976.
DOI : 10.1016/0026-0800(76)90016-1

]. A. Akh75 and . Akhtar, Schmid's law and prismatic slip of zirconium, Scripta Metallurgica, vol.9, issue.8, pp.859-861, 1975.

]. A. Akh76 and . Akhtar, The allotropic transformation bcc-hcp in zirconium, Metallurgical Transactions A, vol.7, pp.1735-1741, 1976.

M. [. Arias, Ruch : Beta/alpha transformation in dilute titanium base alloys, Sixth World Conference on Titanium, France, pp.1669-1674, 1988.

H. [. Ahmed, Phase transformations during cooling in ??+?? titanium alloys, Materials Science and Engineering: A, vol.243, issue.1-2, pp.206-211, 1998.
DOI : 10.1016/S0921-5093(97)00802-2

E. S. Moon, M. G. Menon, and . Hall, Sympathetic nucleation : an overview, Materials Science and Engineering B, vol.32, issue.3, pp.107-123, 1995.

L. [. Balasubramanian and . Anand, Plasticity of initially textured hexagonal polycrystals at high homologous temperatures: application to titanium, Acta Materialia, vol.50, issue.1, pp.133-148, 2002.
DOI : 10.1016/S1359-6454(01)00326-3

]. F. Bas97 and . Basson, Probability of random disorientation axes in cubic polycrystals, Journal of Applied Crystallography, vol.30, pp.102-106, 1997.

E. [. Bonnet and . Cousineau, Determination of near-coincident cells for hexagonal crystals. Related DSC lattices, Acta Crystallographica Section A, vol.37, issue.2, pp.184-189, 1981.
DOI : 10.1107/S0567739481000466

. Bdg-+-98-]-f, C. Basson, A. Desrayaud, F. Girinon, F. Montheillet et al., Analyse pratique et théorique des essais de compression. Rapport technique, 1998.

G. [. Banerjee, D. Dey, S. Srivastava, and . Ranganathan, Plate-shaped transformation products in zirconium-base alloys, Metallurgical and Materials Transactions A, vol.3, issue.11, pp.2201-2216, 1997.
DOI : 10.1007/s11661-997-0178-3

]. H. Bha01 and . Bhadeshia, Bainite in steels -2nd edition. The Institute of, Materials, 2001.

]. M. Bio61, Biot : Theory of folding of stratified viscoelastic media and its implications in tectonics and orogenesis, Geological Society of America Bulletin, vol.72, issue.11, pp.1595-1620, 1961.

. A. Bkc02, H. Bartels, H. Kestler, and . Clemens, Deformation behavior of differently processed ?-titanium aluminides, Materials Science and Engineering, pp.329-331153, 2002.

F. [. Barberis, C. Montheillet, and . Chauvy, Variant selection in zr alloys : How many variants generated from one beta grain, éditeurs : Texture and Anisotropy of Polycrystals II -Proceedings of the International Conference on Texture and Anisotropy of Polycrystals, pp.133-138, 2005.
URL : https://hal.archives-ouvertes.fr/emse-00506062

]. J. Bmk-+-02, T. Bingert, G. Mason, G. Kaschner, and . Gray, Maudlin : Deformation twinning in polycrystalline zr : Insights from electron backscattered diffraction characterization, Metallurgical and Materials Transactions A, vol.33, issue.3, pp.955-963, 2002.

J. T. Berry, M. H. Pope, and N. Misra, Lubrication of ti alloys under conditions of bulk plastic deformation, Titanium Science and Technology, vol.1, pp.419-429, 1973.

P. [. Boubekeur and C. Reuter, Schlick : Visualization of point-based surfaces with locally reconstructed subdivision surfaces, pp.23-32, 2005.

S. [. Bieler, The origins of heterogeneous deformation during primary hot working of Ti???6Al???4V, International Journal of Plasticity, vol.18, issue.9, pp.1165-1189, 2002.
DOI : 10.1016/S0749-6419(01)00057-2

]. D. Bvd-+-03, G. B. Bhattacharyya, R. Viswanathan, D. Denkenberger, H. L. Furrer et al., The role of crystallographic and geometrical relationships between ? and ? phases in an ?/? titanium alloy, Acta Materialia, issue.16, pp.514679-4691, 2003.

G. [. Bhattacharyya, H. L. Viswanathan, and . Fraser, Crystallographic and morphological relationships between ?? phase and the Widmanst??tten and allotriomorphic ?? phase at special ?? grain boundaries in an ??/?? titanium alloy, Acta Materialia, vol.55, issue.20
DOI : 10.1016/j.actamat.2007.08.029

. [. Charquet, Alheritiere : Influence of impurities and temperature on the microstructure of zircaloy-2 and zircaloy-4 after the beta to alpha phase transformation, R. Adamson et L. van Swam, éditeurs : Seventh International Symposium : Zirconium in Nuclear Industry, numéro ASTM STP 939, p.284, 1987.

B. [. Cayron, L. Artaud, and . Briottet, Reconstruction of parent grains from EBSD data, Materials Characterization, vol.57, issue.4-5, pp.386-401, 2006.
DOI : 10.1016/j.matchar.2006.03.008

T. [. Crépin, D. Bretheau, and . Caldemaison, Microstructural study of beta treated grade 702 zirconium. scanning electron microscopy and transmission electron microscopy, complementary of two observationnal scales, Journal of Materials Science, vol.32, issue.18, pp.4841-4846, 1997.
DOI : 10.1023/A:1018603619366

P. [. Chauvy, F. Barberis, and . Montheillet, Microstructure transformation during warm working of ??-treated lamellar Zircaloy-4 within the upper ??-range, Materials Science and Engineering: A, vol.431, issue.1-2, pp.59-67, 2006.
DOI : 10.1016/j.msea.2006.05.031
URL : https://hal.archives-ouvertes.fr/hal-00292933

S. [. Chakravartty, Y. V. Banerjee, and M. K. Prasad, Hot-working characteristics of Zircaloy-2 in the temperature range of 650???950??C, Journal of Nuclear Materials, vol.187, issue.3, pp.260-271, 1992.
DOI : 10.1016/0022-3115(92)90506-G

C. [. Chovet, F. Desrayaud, and . Montheillet, A mechanical analysis of the plane strain channel-die compression test: friction effects in hot metal testing, International Journal of Mechanical Sciences, vol.44, issue.2, pp.343-357, 2002.
DOI : 10.1016/S0020-7403(01)00092-3
URL : https://hal.archives-ouvertes.fr/hal-00297366

U. [. Chen and . Kocks, Texture and microstructure development in Al-2% Mg during high temperature deformation, The Minerals, Metals and Materials Society, pp.89-104, 1991.

. [. Christian, Mahajan : Deformation twinning, Progress in Materials Science, pp.1-157, 1995.

E. [. Chin, A. J. Nesbitt, and . Williams, Anisotropy of strength in single crystals under plane strain compression, Acta Metallurgica, vol.14, issue.4, pp.467-476, 1966.
DOI : 10.1016/0001-6160(66)90314-2

]. H. Con81 and . Conrad, Effect of interstitial solutes on the strength and ductility of titanium, Progress in Materials Science, vol.26, issue.2-4, pp.123-403, 1981.

]. D. Cpg-+-96, A. V. Ciurchea, C. Pop, I. Gheorghiu, M. Furtuna et al., Texture, morphology and deformation mechanisms in ?-transformed zircaloy-4, Journal of Nuclear Materials, vol.231, issue.12, pp.83-91, 1996.

]. J. Cré95 and . Crépin, Etude des mécanismes de déformation et d' endommagement du zirconium grade 702 traité bêta, 1995.

L. [. Castro, Séraphin : Contribution à l' étude métallographique et structurale de l' alliage de titane ta6v, Mémoires scientifiques revue de la métallurgique, pp.1025-1058, 1966.

]. J. Dctaag-+-07, B. Da-costa-teixeira, E. Appolaire, S. Aeby-gautier, G. Denis et al., Spath : Transformation kinetics and microstructures of ti17 titanium alloy during continuous cooling, Materials Science and Engineering : A, vol.448, issue.12, pp.135-145, 2007.

. Ch, S. Desrayaud, J. Girard, F. Le-coze, and . Montheillet, Influence of carbon additions on the dynamic recrystallization of high purity ?-iron, Materials Transactions, vol.43, issue.2, pp.135-140, 2002.

. Ch, S. Desrayaud, L. Girard, J. Vaughan, F. Le-coze et al., Influence of carbon micro-additions on the high temperature rheology of high purity ?-fe based alloys, Matériaux et Techniques -Tenth International Conference on Ultra-High Purity Metallic-Base Materials, 2003.

Z. [. Ding, A. Guo, and . Wilson, Microstructural evolution of a Ti???6Al???4V alloy during thermomechanical processing, Materials Science and Engineering: A, vol.327, issue.2, pp.233-245, 2002.
DOI : 10.1016/S0921-5093(01)01531-3

F. [. De-hoff and . Rhines, Quantitative Microscopy, 1968.

S. [. Derep, R. Ibrahim, G. Rouby, and . Fantozzi, Deformation behaviour of zircaloy-4 between 77 and 900 K, Acta Metallurgica, vol.28, issue.5, pp.607-619, 1980.
DOI : 10.1016/0001-6160(80)90127-3

J. [. Dey and . Sun, An adaptive mls surface for reconstruction with guarantees, S. Desbrun et H. Pottman, éditeurs : Eurographics Symposium on Geometry Processing, pp.43-52, 2005.

N. [. Dobromyslov, N. V. Taluts, and E. A. Kazantseva, Formation of adiabatic shear bands and instability of plastic flow in Zr and Zr-Nb alloys in spherical stress waves, Scripta Materialia, vol.42, issue.1, pp.61-71, 1999.
DOI : 10.1016/S1359-6462(99)00311-5

]. B. Dum97 and . Dumanowski, Simulation de traitements thermomécaniques de l' alliage de titane Ti-6Al-4V dans le domaine biphasé alpha-bêta, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint-Etienne, 1997.

K. [. Exner and . Kuhn, Investigation of the rate of removal of material by diamond polishing, Praktische Metallographie, vol.8, pp.453-469, 1971.

L. [. Elmoutaouakkil, E. Salvo, and . Maire, 2D and 3D Characterization of Metal Foams Using X-ray Tomography, Advanced Engineering Materials, vol.4, issue.10, pp.803-807, 2002.
DOI : 10.1002/1527-2648(20021014)4:10<803::AID-ADEM803>3.0.CO;2-D

B. [. Francillette, M. Bacroix, and J. L. Gasperini, Grain orientation effects in Zr702?? polycrystalline samples deformed in channel die compression at room temperature, Acta Materialia, vol.46, issue.12, pp.4131-4142, 1998.
DOI : 10.1016/S1359-6454(98)00121-9

P. [. Frey and . George, Maillages -applications aux éléments finis, 1999.

]. H. Flo90 and . Flower, Microstructural development in relation to hot working of titanium alloys, Materials Science and Technology, vol.6, pp.1082-1092, 1990.

D. [. Fong, Northwood : Microstructure?impurity content relationships in zircaloy-4 nuclear fuel sheathing, Microstructural Science, vol.10, pp.123-130, 1982.

]. T. Fnh-+-90, A. Fujiwara, M. Nakamura, S. R. Hosomi, Y. Nishitani et al., Deformation of polysynthetically twinned crystals of tial with a nearly stoichiometric composition, Philosophical Magazine A, vol.61, issue.4, pp.591-606, 1990.

M. [. Fundenberger and . Philippe, Mechanical twinning at high temperatures in some hexagonal alloys, Scripta Metallurgica et Materialia, vol.24, issue.7, pp.1215-1220, 1990.
DOI : 10.1016/0956-716X(90)90330-J

H. [. Fujii and . Suzuki, New concept on the beta to alpha phase transformation in titanium alloys, Sixth world Conference on Titanium, pp.1489-1494, 1988.

W. [. Grimmer and D. H. Bollmann, Coincidence-site lattices and complete pattern-shift in cubic crystals, Acta Crystallographica Section A, vol.30, issue.2, pp.197-207, 1974.
DOI : 10.1107/S056773947400043X

N. Gey, E. Gautier, M. Humbert, A. Cerqueira, J. L. Bechade et al., Study of the ??/?? phase transformation of Zy-4 in presence of applied stresses at heating: analysis of the inherited microstructures and textures, Journal of Nuclear Materials, vol.302, issue.2-3, pp.175-184, 2002.
DOI : 10.1016/S0022-3115(02)00789-4
URL : https://hal.archives-ouvertes.fr/hal-00111698

M. [. Gil, J. M. Ginebra, and J. A. Manero, Formation of ??-Widmanst??tten structure: effects of grain size and cooling rate on the Widmanst??tten morphologies and on the mechanical properties in Ti6Al4V alloy, Journal of Alloys and Compounds, vol.329, issue.1-2, pp.142-152, 2001.
DOI : 10.1016/S0925-8388(01)01571-7

M. [. Gey and . Humbert, Characterization of the variant selection occurring during the ???????????? phase transformations of a cold rolled titanium sheet, Acta Materialia, vol.50, issue.2, pp.277-287, 2002.
DOI : 10.1016/S1359-6454(01)00351-2

M. [. Gey, M. J. Humbert, and . Philippe, Investigation of the ??- and ??- texture evolution of hot rolled Ti-64 products, Materials Science and Engineering: A, vol.219, issue.1-2, pp.80-88, 1996.
DOI : 10.1016/S0921-5093(96)10388-9

M. G. Glavicic, P. A. Kobryn, and S. L. , Validation of an automated EBSD method to deduce the ??-phase texture in Ti???6Al???4V with a colony-?? microstructure, Materials Science and Engineering A, vol.385, issue.1-2, pp.372-376, 2004.
DOI : 10.1016/S0921-5093(04)00918-9

F. [. Gourdet and . Montheillet, An experimental study of the recrystallization mechanism during hot deformation of aluminium, Materials Science and Engineering: A, vol.283, issue.1-2, pp.274-288, 2000.
DOI : 10.1016/S0921-5093(00)00733-4

]. D. Han58, Handscomb : On the random disorientation of two cubes, Canadian Journal of Mathematics, vol.10, pp.85-88, 1958.

M. [. Humphreys and . Hatherly, Recrystallization and related annealing phenomena, 2004.

S. [. Hong, K. S. Kim, and . Lee, Effect of oxygen content on the beta-quenched microstructure of modified Zircaloy-4, Journal of Nuclear Materials, vol.265, issue.1-2, pp.108-111, 1999.
DOI : 10.1016/S0022-3115(98)00608-4

]. R. Hol70 and . Holt, The beta to alpha phase transformation in zircaloy-4, Journal of Nuclear Materials, vol.35, issue.3, pp.322-334, 1970.

]. J. How06 and . Howe, Comparison of the atomic structure, composition, kinetics and mechanisms of interfacial motion in martensitic, bainitic, massive and precipitation face-centered cubic-hexagonal close-packed phase transformations, Materials Science and Engineering, pp.438-44035, 2006.

L. [. Hutchinson, P. S. Ryde, B. Bate, and . Bacroix, On the description of misorientations and interpretation of recrystallisation textures, Scripta Materialia, vol.35, issue.5, pp.579-582, 1996.
DOI : 10.1016/1359-6462(96)00194-7

M. [. Inui, A. Oh, M. Nakamura, and . Yamaguchi, Room-temperature tensile deformation of polysynthetically twinned (PST) crystals of TiAl, Acta Metallurgica et Materialia, vol.40, issue.11, pp.403095-3104, 1992.
DOI : 10.1016/0956-7151(92)90472-Q

A. [. Jominy, Boegehold : A hardenability test for carburizing steels, ASM Transactions, vol.27, p.574, 1939.

. [. Jeulin, Moreaud : Segmentation of 2d and 3d textures from estimates of the local orientation, Image Analysis and Stereology, p.page Accepté

M. [. Kad and R. J. Dao, Al lamellar microstructures, Philosophical Magazine A, vol.62, issue.3, pp.567-604, 1995.
DOI : 10.1016/0079-6425(90)90002-Q

. Meyers, Ultrafine-grain-sized zirconium by dynamic deformation, Acta Materialia, vol.54, issue.16, pp.4111-4127, 2006.

M. [. Kral, G. Mangan, R. O. Spanos, and . Rosenberg, Three-dimensional analysis of microstructures, Materials Characterization, vol.45, issue.1, pp.17-23, 2000.
DOI : 10.1016/S1044-5803(00)00046-2

S. [. Kato, T. Onaka, and . Fujii, Energy consideration for variant selection in precipitation on dislocations, Science and Technology of Advanced Materials, vol.56, issue.2, pp.375-380, 2001.
DOI : 10.1016/0001-6160(80)90171-6

]. B. Koo04 and . Kooi, Monte carlo simulations of phase transformations caused by nucleation and subsequent anisotropic growth : Extension of the johnson-mehl-avramikolmogorov theory, Physical Review B, vol.70, issue.22, pp.224108-224120, 2004.

J. [. Kim and . Park, In-situ measurement of continuous cooling ?? ??? ?? transformation behavior of CP-Ti, Metallurgical and Materials Transactions A, vol.29, issue.4, pp.1051-1056, 2002.
DOI : 10.1007/s11661-002-0206-2

S. [. Lauridsen, R. W. Dey, D. Fonda, and . Jensen, Nondestructive approaches for 3-D materials characterization, JOM, vol.36, issue.10, pp.40-44, 2006.
DOI : 10.1007/BF02748494

]. B. Leg84 and . Legrand, Relations entre la structure électronique et la facilité de glissement dans les métaux hexagonaux compacts, Philosophical Magazine, vol.49, pp.171-184, 1984.

P. [. Lan and . Hudleston, Rock rheology and sharpness of folds in single layers, Journal of Structural Geology, vol.18, issue.7, pp.925-931, 1996.
DOI : 10.1016/0191-8141(96)00018-1

F. [. Lustman and . Kerze, The Metallurgy of Zirconium, Journal of The Electrochemical Society, vol.104, issue.12, 1955.
DOI : 10.1149/1.2428451

[. Murty and I. Charit, Texture development and anisotropic deformation of zircaloys, Progress in Nuclear Energy, pp.325-359, 2006.

. Quemener, A numerical study for the estimation of a convection heat transfer coefficient during a metallurgical "jominy end-quench" test, International Journal of Thermal Sciences, vol.41, issue.6, pp.517-527, 2002.

R. Logé, Influence des conditions thermomécaniques et de la microstructure sur les évolutions de texture cristallographique du Zircaloy 4 en mise en forme à chaud, 1999.

M. [. Larson, Picklesimer : Determination of the basal-pole orientation in zirconium by polarized-light microscopy, Transactions of the Metallurgical Society of AIME, vol.236, pp.1104-1106, 1966.

F. [. Liu, C. Sommer, and . Bos, Analysis of solid state phase transformation kinetics: models and recipes, International Materials Reviews, vol.3, issue.4, pp.193-212, 2007.
DOI : 10.1007/BF01914373

. E. Lsc-+-00-]-r, J. W. Loge, Y. B. Signorelli, M. Y. Chastel, R. A. Perrin et al., Sensitivity of ?-zy4 high-temperature deformation textures to the ?-quenched precipitate structure and to recrystallization : application to hot extrusion, Acta Materialia, issue.15, pp.483917-3930, 2000.

H. [. Menon, Overview no. 57 Morphology, crystallography and kinetics of sympathetic nucleation, Acta Metallurgica, vol.35, issue.3, pp.549-563, 1987.
DOI : 10.1016/0001-6160(87)90179-9

]. A. Mas07 and . Massih, Review of experimental data for modelling lwr fuel cladding behaviour under loss of coolant accident conditions. Rapport technique, 2007.

. R. Maw-+-03-]-a, T. Massih, P. Andersson, M. Witt, and . Dahlback, Limback : Effect of quenching rate on the ?-to-? phase transformation structure in zirconium alloy, Journal of Nuclear Materials, vol.322, issue.2-3, pp.138-151, 2003.

T. [. Miller and S. L. Bieler, Semiatin : Flow softening during hot working of ti-6al-4v with a lamellar colony microstructure, Scripta Materialia, issue.12, pp.401387-1393, 1999.

M. [. Male, Cockcroft : A method for determination of the coefficient of friction of metals under conditions of bulk plastic deformation, Journal of the Institute of Metals, vol.93, pp.38-46, 1964.

G. [. Mills and . Craig, The plastic deformation of zirconium-oxygen alloy single crytals in the range 77 to 950 k, Transactions of the Metallurgical Society AIME, vol.242, issue.9, pp.1881-1890, 1968.

]. C. Mch53 and . Mchargue, The crystallography of the titanium transformation, Acta Crystallographica, vol.6, issue.6, pp.529-530, 1953.

. Tom&eacute, Effects of texture, temperature and strain on the deformation modes of zirconium, Philosophical Magazine, vol.86, issue.23, pp.3595-3611, 2006.

[. Maurice and J. H. Driver, High temperature plane strain compression of cube oriented aluminium crystals, Acta Metallurgica et Materialia, vol.41, issue.6, pp.1653-1664, 1993.
DOI : 10.1016/0956-7151(93)90185-U

H. [. Montagnat, N. Delingette, and . Scapel, Ayache : Representation, shape, topology and evolution of deformable surfaces. application to 3d medical image segmentation, 2000.

K. Madi, S. Forest, M. Boussuge, S. Gailliegue, E. Lataste et al., Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography, Computational Materials Science, vol.39, issue.1, pp.224-229, 2007.
DOI : 10.1016/j.commatsci.2006.01.033
URL : https://hal.archives-ouvertes.fr/hal-00140558

J. [. Mchargue and . Hammond, Deformation mechanisms in titanium at elevated temperatures, Acta Metallurgica, vol.1, issue.6, pp.700-701, 1953.
DOI : 10.1016/0001-6160(53)90028-5

G. [. Matsuura, H. Hood, and . Zou, The correspondence between self-diffusion properties and melting temperatures for ??-Zr and ??-Ti, Journal of Nuclear Materials, vol.238, issue.2-3, pp.260-263, 1996.
DOI : 10.1016/S0022-3115(96)00458-8

O. [. Mcqueen, N. Knustad, J. K. Ryum, and . Solberg, Microstructural evolution in Al deformed to strains of 60 at 400??C, Scripta Metallurgica, vol.19, issue.1, pp.73-78, 1985.
DOI : 10.1016/0036-9748(85)90268-6

M. [. Mcquillan and . Mcquillan, Metallographic techniques for titanium and its alloys, Titanium, chapitre 14, pp.447-458, 1956.

]. B. Mor99 and . Morère, Recristallisation d' un alliage d' aluminium 7010 après déformation à chaud ; influence sur la ténacité, Thèse de doctorat, 1999.

[. Maurice, D. Piot, H. Klocker, and J. H. Driver, Hot plane strain compression testing of aluminum alloys by channel-die compression, Metallurgical and Materials Transactions A, vol.44, issue.389, pp.1039-1047, 2005.
DOI : 10.1007/s11661-005-0297-7
URL : https://hal.archives-ouvertes.fr/emse-00505831

R. [. Martin, Reed-Hill : A study of basal slip kink bands in polycrystalline zirconium, Transactions of the Metallurgical Society of AIME, vol.230, pp.780-785, 1964.

M. [. Mackenzie and . Thomson, SOME STATISTICS ASSOCIATED WITH THE RANDOM DISORIENTATION OF CUBES, Biometrika, vol.44, issue.1-2, pp.205-210, 1957.
DOI : 10.1093/biomet/44.1-2.205

B. N. Mehrotra and K. Tangri, High temperature (600???800??C) thermally activated deformation behaviour of ??-Zircaloy-4-Oxygen alloys, Acta Metallurgica, vol.28, issue.10, pp.1385-1394, 1980.
DOI : 10.1016/0001-6160(80)90007-3

O. [. Meyers, V. A. Vohringer, and . Lubarda, The onset of twinning in metals: a constitutive description, Acta Materialia, vol.49, issue.19, pp.4025-4039, 2001.
DOI : 10.1016/S1359-6454(01)00300-7

D. [. Mahajan and . Williams, Deformation Twinning in Metals and Alloys, International Metallurgical Reviews, vol.9, issue.2, pp.43-61, 1973.
DOI : 10.1080/14786440608520467

A. [. Newkirk and . Geisler, Crystallographic aspects of the beta to alpha transformation in titanium, Acta Metallurgica, vol.1, issue.3, pp.370-371, 1953.
DOI : 10.1016/0001-6160(53)90113-8

D. [. Newkirk and . Mackenzie, The Jominy End Quench for Light-Weight Alloy Development, Journal of Materials Engineering and Performance, vol.9, issue.4, pp.408-415, 2000.
DOI : 10.1361/105994900770345809

Y. [. Numakura and . Minonishi, 1} slip in zirconium, Okvist et K, pp.1077-1084316, 1970.
DOI : 10.1007/BF02648537

J. [. Oh, J. K. Lee, and . Park, Continuous cooling beta-to-alpha transformation behaviors of extra-pure and commercially pure ti, Metallurgical and Materials Transactions A, issue.10, pp.35-3071, 2004.

]. P. Par67 and . Partridge, The crystallography and deformation modes of hexagonal close-packed metals, Metallurgical Reviews, vol.118, pp.169-194, 1967.

]. H. Pau06 and . Paul, Heterogeneities of plastic deformation in lamellar structures of hcp and fcc alloys and their influence on deformation and recrystallization processes. Rapport technique, 2006.

W. [. Paton, Backofen : Plastic deformation of titanium at elevated temperatures, Metallurgical Transactions, vol.1, pp.2839-2847, 1970.

R. [. Panchanadeeswaran and . Doherty, Direct observation of orientation change by channel die compression in polycrystalline aluminum?use of split sample, Scripta Metallurgica et Materialia, pp.213-218, 1993.

. [. Bibliographie, R. D. Panchanadeeswaran, R. Doherty, and . Becker, Direct observation of orientation change by channel die compression of polycrystalline aluminum? use of a split sample, Acta Materialia, vol.44, issue.3, pp.1233-1262, 1996.

[. Denis, C. Barat, D. Jeulin, and C. , Ducottet : 3D complex shape characterization by statistical analysis : Application to aluminium alloys, Materials Characterization

]. J. Per84, Perepezko : Growth kinetics and mechanism of the massive transformation, Metallurgical Transactions A, vol.15, pp.437-447, 1984.

L. [. Pusztai and . Gránásy, Monte Carlo simulation of first-order phase transformations with mutual blocking of anisotropically growing particles up to all relevant orders, Physical Review B, vol.57, issue.22, pp.14110-1998
DOI : 10.1103/PhysRevB.57.14110

[. Poirier and R. L. Hazif, Microscopie électronique et déformation plastique des métaux et alliages hexagonaux compacts, Journal de Microscopie et de Spectroscopie Electroniques, vol.1, pp.595-607, 1976.

]. D. Pot73 and . Potter, The structure, morphology and orientation relationship of V3N in ?-vanadium, Journal of the Less Common Metals, vol.31, issue.2, pp.299-309, 1973.

]. J. Pou04, Pouchou : L' analyse EBSD ? Principes et Applications, EDP Sciences, 2004.

S. [. Perez-prado, M. E. Barrabes, E. Kassner, and . Evangelista, Dynamic restoration mechanisms in ??-zirconium at elevated temperatures, Acta Materialia, vol.53, issue.3, pp.581-591, 2005.
DOI : 10.1016/j.actamat.2004.10.011

A. [. Pitsch and . Schrader, Die Ausscheidungsform des ??-Karbids im Ferrit und im Martensit beim Anlassen, Archiv f??r das Eisenh??ttenwesen, vol.29, issue.11, p.715, 1958.
DOI : 10.1002/srin.195803018

N. [. Phelan, R. Stanford, and . Dippenaar, In situ observations of Widmanst??tten ferrite formation in a low-carbon steel, Materials Science and Engineering: A, vol.407, issue.1-2, pp.127-134, 2005.
DOI : 10.1016/j.msea.2005.07.015

J. [. Plichta, H. Williams, and . Aaronson, On the existence of the ???????m transformation in the alloy systems Ti-Ag, Ti-Au, and Ti-Si, Metallurgical Transactions A, vol.140, issue.12, pp.1885-1892, 1977.
DOI : 10.1007/BF02646561

[. Quach and D. O. Northwood, Influence of the phosphorus impurity content on the microstructure of Zircaloy-4 air cooled from the high temperature beta phase region, Metallography, vol.17, issue.2, pp.191-201, 1984.
DOI : 10.1016/0026-0800(84)90022-3

]. D. Raa02 and . Raabe, Cellular automata in materials science with particular reference to recrystallization simulation, Annual Review of Materials Research, vol.32, pp.53-76, 2002.

H. Ramberg, Selective buckling of composite layers with contrasted rheological properties, a theory for simultaneous formation of several orders of folds, Tectonophysics, vol.1, issue.4, pp.307-341, 1964.
DOI : 10.1016/0040-1951(64)90020-4

]. P. Rey77, Reynolds : The HCP to BCC phase transition in metals, Journal of Physics C, vol.10, pp.4463-4469, 1977.

M. [. Ramsay and . Huber, The techniques of modern structural geology, 1987.

D. [. Reed-hill and . Baldwin, A technique for orienting grains in a finegrained polycrystalline hexagonal close-packed metal using the polarized-light microscope, Transactions of the Metallurgical Society of AIME, vol.233, pp.842-844, 1965.

O. [. Romans, H. Paasche, and . Kato, The transformation temperature of hafnium, Journal of the Less Common Metals, vol.8, issue.3, pp.213-215, 1965.
DOI : 10.1016/0022-5088(65)90048-2

G. [. Randle, Y. Rohrer, and . Hu, Five-parameter grain boundary analysis of a titanium alloy before and after low-temperature annealing, Scripta Materialia, vol.58, issue.3, pp.183-186, 2008.
DOI : 10.1016/j.scriptamat.2007.09.044

T. [. Semiatin and . Bieler, The effect of alpha platelet thickness on plastic flow during hot working of TI???6Al???4V with a transformed microstructure, Acta Materialia, vol.49, issue.17
DOI : 10.1016/S1359-6454(01)00236-1

P. [. Stanford and . Bate, Crystallographic variant selection in ti, pp.6-10

P. [. Stanford and . Bate, Crystallographic variant selection in ??????? brass, Acta Materialia, vol.53, issue.3
DOI : 10.1016/j.actamat.2004.10.043

]. L. Scm-+-03, P. Salvo, E. Cloetens, S. Maire, J. Zabler et al., Josserond : X-ray microtomography an attractive characterisation technique in materials science, Physics Research Section B : Beam Interactions with Materials and Atoms, pp.273-286, 2003.

D. [. Shechtman and . Eylon, On the unstable shear in fatigued ??-annealed Ti-11 and IMI-685 alloys, Metallurgical Transactions A, vol.9, issue.7, pp.1018-1020, 1978.
DOI : 10.1007/BF02649850

. Sfc-+-06-]-t, F. D. Schaden, H. Fischer, F. Clemens, A. Appeland et al., Numerical modelling of kinking in lamellar gamma-tial based alloys, Advanced engineering materials, vol.8, pp.1109-1113, 2006.

G. [. Song and . Gray, Structural interpretation of the nucleation and growth of deformation twins in Zr and Ti???I. Application of the coincidence site lattice (CSL) theory to twinning problems in h.c.p. structures, Acta Metallurgica et Materialia, vol.43, issue.6, pp.432325-2337, 1995.
DOI : 10.1016/0956-7151(94)00433-1

]. C. Smi60 and . Smith, A History of Metallography, 1960.

. [. Salinas-rodriguez, Grain size effects on the texture evolution of alpha-zr

S. [. Shell and . Semiatin, Effect of initial microstructure on plastic flow and dynamic globularization during hot working of Ti-6Al-4V, Metallurgical and Materials Transactions A, vol.40, issue.12, pp.3219-3229, 1999.
DOI : 10.1007/s11661-999-0232-4

V. [. Semiatin, A. K. Seetharaman, and . Ghosh, Plastic flow, microstructure evolution, and defect formation during primary hot working of titanium and titanium aluminide alloys with lamellar colony microstructures, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.357, issue.1756, pp.1487-1512, 1756.
DOI : 10.1098/rsta.1999.0386

M. [. Stuckert, U. Steinbrück, and A. V. Stegmaier, Palagin : On the thermo-physical properties of zircaloy-4 and zro2 at high temperatures, 2002.

V. [. Semiatin, I. Seetharaman, and . Weiss, Hot workability of titanium and titanium aluminide alloys???an overview, Materials Science and Engineering: A, vol.243, issue.1-2, pp.1-24, 1998.
DOI : 10.1016/S0921-5093(97)00776-4

]. T. Stt-+-05, J. Searles, A. Tiley, R. Tanner, B. Williams et al., Rapid characterization of titanium microstructural features for specific modelling of mechanical properties, Measurement Science and Technology, vol.16, issue.1, pp.60-69, 2005.

. F. Stz-+-01-]-m, J. Savage, M. Tatalovich, K. J. Zupan, and M. J. Hemker, Mills : Deformation mechanisms and microtensile behavior of single colony ti-6242si, Materials Science and Engineering, pp.319-321398, 2001.

]. S. Svn-+-99, G. B. Suri, T. Viswanathan, D. H. Neeraj, and M. J. Hou, Mills : Room temperature deformation and mechanisms of slip transmission in oriented singlecolony crystals of an ?/? titanium alloy, Acta Materialia, issue.3, pp.471019-1034, 1999.

]. E. Ten88 and . Tenckhoff, Deformation mechanisms, texture, and anisotropy in zirconium and zirconium alloys. ASTM special technical publication STP 966, 1988.

Y. [. Terai, S. Takahashi, and . Masumura, Heat capacity and phase transition of Zircaloy-4, Journal of Nuclear Materials, vol.247, pp.222-226, 1997.
DOI : 10.1016/S0022-3115(97)00048-2

. Price, Possible thermal and chemical stabilization of body-centred-cubic iron in the earth' s core, Nature, vol.424, pp.536-539, 2003.

]. S. Van-bohemen and J. , alloys, Physical Review B, vol.74, issue.13, p.134114, 2006.
DOI : 10.1103/PhysRevB.74.134114

. [. Vanderesse, . Ch, M. Desrayaud, F. Darrieulat, and . Montheillet, Compression plane à chaud d'un alliage de zirconium, Matériaux, pp.13-17, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00293737

. [. Vanderesse, . Ch, S. Desrayaud, and M. Girard-insardi, Channel-die compression at high temperature, Materials Science and Engineering: A, vol.476, issue.1-2, pp.322-332, 2008.
DOI : 10.1016/j.msea.2007.04.118
URL : https://hal.archives-ouvertes.fr/emse-00475608

]. A. Van-ginneken and W. G. , The habit plane of the zirconium transformation, Acta Crystallographica, vol.5, issue.4, pp.548-549, 1952.
DOI : 10.1107/S0365110X52001520

. Vmd-+-08-]-n, E. Vanderesse, M. Maire, F. Darrieulat, M. Montheillet et al., Jeulin : 3d microtomographic study of widmanstatten microstructures in an alpha/beta titanium alloy, Scripta Materialia, vol.58, pp.512-515, 2008.

]. S. Wal07 and . Walley, Shear localization : A historical overview, Metallurgical and Materials Transactions A, vol.38, issue.11, pp.2629-2654, 2007.

M. [. Wang and M. J. Aindow, Effect of self-accommodation on ??/?? boundary populations in pure titanium, Acta Materialia, vol.51, issue.9, pp.2485-2503, 2003.
DOI : 10.1016/S1359-6454(03)00035-1

F. [. Weiss, D. Froes, G. E. Eylon, and . Welsch, Modification of alpha morphology in Ti-6Al-4V by thermomechanical processing, Metallurgical Transactions A, vol.8, issue.No. 2, pp.1935-1947, 1986.
DOI : 10.1007/BF02644991

G. [. Wadee and M. A. Hunt, Kink band instability in layered structures, Journal of the Mechanics and Physics of Solids, vol.52, issue.5, pp.1071-1091, 2004.
DOI : 10.1016/j.jmps.2003.09.026

]. J. Bibliographie-[-wil73 and . Williams, Critical review : kinetics and phase transformations, Titanium Science and Technology, pp.1433-1494, 1973.

F. Von, W. E. Wever, and . Schmid, Texturen kaltverformter metalle, Zeitschrift für Metallkunde, vol.22, pp.133-140, 1930.

K. [. Woo and . Tangri, Transformation characteristics of rapidly heated and quenched zircaloy-4-oxygen alloys, Journal of Nuclear Materials, vol.79, issue.1, pp.83-94, 1979.
DOI : 10.1016/0022-3115(79)90435-5

S. [. Yoo, J. R. Agnew, K. M. Morris, and . Ho, Non-basal slip systems in HCP metals and alloys: source mechanisms, Materials Science and Engineering: A, vol.319, issue.321, pp.319-32187, 2001.
DOI : 10.1016/S0921-5093(01)01027-9

J. [. Yoo and . Lee, Deformation twinning in h.c.p. metals and alloys, Philosophical Magazine A, vol.31, issue.5, pp.987-1000, 1991.
DOI : 10.1016/0001-6160(80)90095-4

]. S. Zae03 and . Zaefferer, A study of active deformation systems in titanium alloys : dependence on alloy composition and correlation with deformation texture, Materials Science and Engineering : A, vol.344, issue.12, pp.20-30, 2003.

]. Zk05a, P. M. Zhang, and . Kelly, Edge-to-edge matching and its applications : Part i. application to the simple hcp/bcc system, Acta Materialia, vol.53, issue.4, pp.1073-1084, 2005.

]. Zk05b, P. M. Zhang, and . Kelly, Edge-to-edge matching model for predicting orientation relationships and habit planes?the improvements, Scripta Materialia, issue.10, pp.52963-968, 2005.