B. Borsotto, D. Beauvois, E. Godoy, E. Negre, and . Glissement, Piloté d'un Système d'Embrayage ? Application au Filtrage d'Acyclismes », à paraître dans les actes de la 5 ème Conférence Internationale Francophone en Automatique CIFA, pp.3-6, 2008.

K. Jabri, D. Dumur, B. Bele, A. Mouchette, and E. Godoy, Suppression of periodic disturbances in the continuous casting process, 2008 IEEE International Conference on Control Applications, pp.3-5, 2008.
DOI : 10.1109/CCA.2008.4629617
URL : https://hal.archives-ouvertes.fr/hal-00339352

O. , A. Assad, E. Godoy, and V. Croulard, Macroscopic drive chain efficiency modeling using state machines, Proceedings of 17 th IFAC World Congress, pp.6-11, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00293358

K. Jabri, E. Godoy, D. Dumur, B. Bele, and A. Mouchette, Disturbances estimation for mold level control in the continuous casting process, Proceedings of Int'l Conf. Informatics in Control, Automation and Robotics ICINCO 2008, pp.11-15, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00293775

N. Romani, E. Godoy, D. Beauvois, V. Le, and . Lay, Multivariable Control for Air Management System in Fuel Reforming Fuel Cell Vehicle, Proceedings of IEEE European Control Conference ECC'2007, pp.2-5, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00261855

E. Godoy and E. Ostertag, Dual RST-control of an inverted pendulum, with Simulink S-functions implementation, Proceedings of IEEE European Control Conference ECC'2007, pp.2-5, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00258771

O. , A. Assad, E. Godoy, and V. Croulard, Irreversibility modeling applied to the control of complex robotic drive chains, Proceedings of Int'l Conf. Informatics in Control, Automation and Robotics ICINCO 2007, pp.9-12, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00258553

B. Borsotto, E. Godoy, D. Beauvois, and E. Devaud, An identification method for static and dynamic friction coefficients, 2007 International Conference on Control, Automation and Systems, pp.17-20, 2007.
DOI : 10.1109/ICCAS.2007.4407037
URL : https://hal.archives-ouvertes.fr/hal-00258558

M. Zainea, E. Godoy, J. Buisson, H. Cormerais, and H. Guéguen, The open-loop control for the start-up of a double resonance converter using a hybrid systems approach, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control, pp.4-6, 2006.
DOI : 10.1109/CACSD-CCA-ISIC.2006.4776674
URL : https://hal.archives-ouvertes.fr/hal-00114721

E. Godoy and E. Ostertag, RST-CONTROLLER DESIGN: A RATIONAL TEACHING METHOD BASED ON TWO DIOPHANTINE EQUATIONS, Proceedings of 7 th IFAC Symposium on Advances in Control Education ACE'06, pp.21-23, 2006.
DOI : 10.3182/20060621-3-ES-2905.00093
URL : https://hal.archives-ouvertes.fr/hal-00262437

E. Ostertag and E. Godoy, « Synthèse RST à déphasage nul pour la régulation de la qualité d'un réseau électrique », dans les actes de la 6 ème Conférence Internationale Francophone en Automatique CIFA, pp.30-31, 2006.

N. Romani, E. Godoy, D. Beauvois, V. Le, L. C. Ligeret et al., « Modélisation et commande du système d'alimentation en air d'un véhicule Pile à Combustible avec reformage embarqué », dans les actes de la 6 ème Conférence Internationale Francophone en AutomatiqueAnalysis and Savings of Energy Consumed by Production Cell Control, Proceedings of IFAC workshop on Energy Saving Control in Plants and Buildings, 2006.

E. Godoy and D. Beauvois, Analyse et commande d'un batteur actif à double étage », collaboration Vibrachoc-Supélec, 2002.

E. Godoy, Commande d'un convertisseur à double résonance Analyse de la robustesse», collaboration General Electric Medical Systems-Supélec, 1998.

E. Godoy, Commande d'un convertisseur à double résonance. Synthèse des lois de commande, modes vasculaires », collaboration General Electric Medical Systems-Supélec, 1998.

E. Godoy, Commande d'un convertisseur à double résonance. Synthèse des lois de commande », collaboration General Electric Medical Systems-Supélec, 1998.

E. Godoy, Commande d'un convertisseur à double résonance. Modélisation et simulation du convertisseur », collaboration General Electric Medical Systems-Supélec, 1997.

E. Godoy, « Régulation numérique d'un onduleur à découpage », collaboration Schneider Electric-Supélec, 1995.

D. Beauvois, P. Boucher, and E. Godoy, Commande en force d'un vérin hydraulique pour suspension active de véhicule », étude en collaboration avec Renault, 1993.

E. Godoy, Optimisation des lois de commande pour pale d'hélicoptère », collaboration GDI-Supélec, étude DRET, 1992.

P. Boucher and E. Godoy, « Étude et optimisation de l'asservissement anti-décrochage de pale d'hélicoptère », collaboration GDI-Supélec, étude DRET, 1989.

N. Romani, E. Godoy, D. Beauvois, V. Le, and . Lay, Control-Oriented Modeling and Analysis of Air Management System for Fuel Reforming Fuel Cell Vehicle, Journal of Fuel Cell Science and Technology, vol.5, issue.1, 2008.
DOI : 10.1115/1.2784323
URL : https://hal.archives-ouvertes.fr/hal-00293354

N. Romani, E. Godoy, D. Beauvois, V. Le, and . Lay, Multivariable Control for Air Management System in Fuel Reforming Fuel Cell Vehicle, Proceedings of IEEE European Control Conference ECC'2007, pp.2-5
URL : https://hal.archives-ouvertes.fr/hal-00261855

A. Stefanopoulou and K. W. Suh, Mechatronics in fuel cell systems, Control Engineering Practice, vol.15, issue.3, pp.277-289, 2007.
DOI : 10.1016/j.conengprac.2005.12.003

K. Suh and A. G. Stefanopoulou, Control and Coordination of Air Compressor and Voltage Converter in Load-Following Fuel Cells, proceedings of 13 th Mediterranean Conference on Control and Automation, MED'05, pp.563-568, 2005.

J. Pukrushpan, H. Peng, and A. Stefanopoulou, Simulation and Analysis of Transient Fuel Cell System Performance Based on a Dynamic Reactant Flow Model, Dynamic Systems and Control, 2002.
DOI : 10.1115/IMECE2002-32051

S. Gelfi, J. Pukrushpan, A. Stefanopoulou, and H. Peng, Dynamics of low-pressure and high-pressure fuel cell air supply systems, Proceedings of the 2003 American Control Conference, 2003., pp.4-6, 2003.
DOI : 10.1109/ACC.2003.1243376

D. Boettner, G. Paganelli, Y. G. Guezennec, G. Rizzoni, and M. J. Moran, Proton Exchange Membrane Fuel Cell System Model for Automotive Vehicle Simulation and Control, Journal of Energy Resources Technology, vol.124, issue.1, pp.20-27, 2002.
DOI : 10.1115/1.1447927

S. Rodatz, G. Paganelli, and L. Guzzella, Optimizing air supply control of a PEM fuel cell system, Proceedings of the 2003 American Control Conference, 2003., pp.4-6, 2003.
DOI : 10.1109/ACC.2003.1243375

M. Tekin, D. Hissel, M. C. Pera, and J. M. Kauffmann, Energy consumption reduction of a PEM fuel cell motor-compressor group thanks to efficient control laws, Journal of Power Sources, vol.156, issue.1, pp.57-63, 2006.
DOI : 10.1016/j.jpowsour.2005.08.037
URL : https://hal.archives-ouvertes.fr/hal-00502979

E. Godoy, Optimisation des lois de commande pour pale d'hélicoptère », collaboration GDI-Supélec, étude DRET, 1992.

P. Boucher and E. Godoy, « Étude et optimisation de l'asservissement anti-décrochage de pale d'hélicoptère », collaboration GDI-Supélec, étude DRET, 1989.

R. Stribeck, Die wesentlichen Eigenschaften der Gleit-und Rollenlager, Zeitschrift des Vereines Seutscher Ingenieure, 1902.

B. Armstrong-helouvry, P. Dupont, C. Canudas, and . Wit, A survey of models, analysis tools and compensation methods for the control of machines with friction, Automatica, vol.30, issue.7, pp.1083-1138, 1994.
DOI : 10.1016/0005-1098(94)90209-7

H. Olsson, C. Canudas, K. J. De-wit, P. Astrom, and . Lischinsky, A new model for control of systems with friction, IEEE Transactions on Automatic Control, vol.40, pp.419-425, 1995.

P. Dahl, Solid Friction Damping of Mechanical Vibrations, AIAA Journal, vol.14, issue.12, pp.1675-1682, 1976.
DOI : 10.2514/3.61511

P. Dupont, B. Armstrong-b, and V. Hayward, Elastoplastic friction model: contact compliance and stiction, proceedings of American Control Conference, pp.1072-1077, 2000.
DOI : 10.1109/acc.2000.876665
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.216.7908

D. A. Haessig-d and B. Friedland, On the Modeling and Simulation of Friction, Journal of Dynamic Systems, Measurement, and Control, vol.113, issue.3, pp.354-362, 1991.
DOI : 10.1115/1.2896418

D. Karnopp, Computer Simulation of Stick-Slip Friction in Mechanical Dynamic Systems, Journal of Dynamic Systems, Measurement, and Control, vol.107, issue.1, pp.100-103, 1985.
DOI : 10.1115/1.3140698

P. Dolcini, C. Canudas, H. De-wit, and . Béchart, IMPROVED OPTIMAL CONTROL OF DRY CLUTCH ENGAGEMENT, proceedings of 16 th IFAC World Congress, 2005.
DOI : 10.3182/20050703-6-CZ-1902.01892
URL : https://hal.archives-ouvertes.fr/hal-00397467

L. Glielmo-;-f and . Vasca, Optimal Control of Dry Clutch Engagement, SAE Technical Paper Series, pp.1233-1239, 2000.
DOI : 10.4271/2000-01-0837

B. Armstrong, Friction: experimental determination, modeling and compensation, Proceedings. 1988 IEEE International Conference on Robotics and Automation, pp.1422-1427, 1988.
DOI : 10.1109/ROBOT.1988.12266

G. Henriot, Traité théorique et pratique des engrenages, 1991.

G. Abba and N. Chaillet, Robot dynamic modeling using a power flow approach with application to biped locomotion, Autonomous Robots, vol.6, issue.1, pp.39-52, 1999.
DOI : 10.1023/A:1008820525412

G. Abba and P. Sardain, Mod??lisation des frottements dans les ??l??ments de transmission d'un axe de robot en vue de son identificationFriction modelling of a robot transmission chain with identification in mind, M??canique & Industries, vol.4, issue.4, pp.391-396, 2003.
DOI : 10.1016/S1296-2139(03)00074-5

O. , A. Assad, E. Godoy, and V. Croulard, Irreversibility modeling applied to the control of complex robotic drive chains, proceedings of International Conference on Informatics in Control, Automation and Robotics, pp.217-222, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00258553

O. , A. Assad, E. Godoy, and V. Croulard, Macroscopic drive chain efficiency modeling using state machines, paraitre dans les actes de 17 th IFAC World Congress, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00293358

P. E. Dupont, Friction modeling in dynamic robot simulation, Proceedings., IEEE International Conference on Robotics and Automation, pp.1370-1376, 1990.
DOI : 10.1109/ROBOT.1990.126193

W. Khalil and E. Dombre, Modeling, Identification and Control of Robots, Applied Mechanics Reviews, vol.56, issue.3, 2002.
DOI : 10.1115/1.1566397

P. Poignet, M. Gautier, W. Khalil, and M. T. Pham, Modeling, simulation and control of high speed machine tools using robotics formalism, Mechatronics, vol.12, issue.3, pp.461-487, 2002.
DOI : 10.1016/S0957-4158(01)00003-4
URL : https://hal.archives-ouvertes.fr/lirmm-00268641

W. Khalil and J. F. Kleinfinger, A new geometric notation for open and closed-loop robots, Proceedings. 1986 IEEE International Conference on Robotics and Automation, pp.1174-1179, 1986.
DOI : 10.1109/ROBOT.1986.1087552

U. Jönsson, Robustness Analysis of Nonlinear and Uncertain Systems, 1996.

C. Kao, Efficient ComputationalMethods for Robustness Analysis, 2002.

C. Kao and A. Megretski, Fast Algorithms for Solving IQC Feasibility and Optimization Problems, American Control Conference, pp.3019-3024, 2001.

C. Kao, A. Megretski, and U. Jönsson, Specialized fast algorithms for IQC feasibility and optimization problems, Automatica, vol.40, issue.2, pp.239-252, 2004.
DOI : 10.1016/j.automatica.2003.09.016

A. Megretski, C. Kao, and A. Rantzer, A Guide to IQC! : Software for Robustness Analysis Laboratory for Information and Decision Systems, Massachusetts Institute of Technology, 2000.

A. Megretski and A. Rantzer, System analysis via integral quadratic constraints, IEEE Transactions on Automatic Control, vol.42, issue.6, pp.819-830, 1997.
DOI : 10.1109/9.587335

G. Scorletti, Approche unifiée de l'analyse et de la commande des systèmes par formulation LMI », these de l, 1997.

A. Isidori, Nonlinear Control Systems, 1995.

I. Adounkpe, E. Godoy, and J. Harcaut, Robustness analysis of a nonlinear missile autopilot: an integral quadratic constraint approach, Proceedings of 5 th IEEE Asian Control Conference, pp.1833-1840, 2004.

I. Adounkpé, J. Harcaut, H. Resul, and E. Godoy, Robustness analysis of a non linear missile autopilot via integral quadratic constraints, Proceedings of 16 th IFAC Symposium on Automatic Control in Aerospace ACA'2004, Saint Petersbourg, 2004.

J. Adounkpe, E. Godoy, J. Ph, S. Harcaut, and . Diop, Robustness analysis of a dynamic inversion based missile autopilot, Proceedings of 9 th International IEEE Conference on Methods and Models in Automation and Robotics, MMAR 2003, 2003.

R. D. Middlebrook and S. Cuk, A General Unified Approach to Modeling Switching- Converter Power Stages, IEEE Power Electronics Specialists Conference, PESC'1976, pp.77-40951, 1976.

R. D. Middlebrook and S. Cuk, Modelling and Analysis Methods for Dc-to-Dc Switching Converters, IEEE International Semiconductor Power Converter Conference, pp.90-111, 1977.

W. M. Polivka-;-p, R. D. Chetty, and . Middlebrook, State-Space Average modelling of converters with parasitics and storage-time modulation, 1980 IEEE Power Electronics Specialists Conference, pp.81-32951, 1980.
DOI : 10.1109/PESC.1980.7089440

S. Freeland and R. D. Middlebrook, A unified analysis of converters with resonant switches, 1987 IEEE Power Electronics Specialists Conference, pp.88-38776, 1987.
DOI : 10.1109/PESC.1987.7077159

R. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2001.

B. Miao, R. Zane-;-d, and . Maksimovic, Automated Digital Controller Design for Switching Converters, IEEE 36th Conference on Power Electronics Specialists, 2005., pp.2729-2735, 2005.
DOI : 10.1109/PESC.2005.1582019

D. M. Sable, B. H. Cho, and R. B. Ridley, Elimination of the positive zero in fixed frequency boost and flyback converters, Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition, pp.205-211, 1990.
DOI : 10.1109/APEC.1990.66413

R. B. Ridley, A new continuous-time model for current-mode control with constant frequency, constant on-time, and constant off-time, in CCM and DCM, 21st Annual IEEE Conference on Power Electronics Specialists, pp.11-14, 1990.
DOI : 10.1109/PESC.1990.131213

R. B. Ridley, Comparison of Performance of Single-Loop and Current-Injection Control for PWM Converters that Operate in Both Continuous and Discontinuous Modes of Operation, IEEE Transactions on Power Electronics, vol.7, pp.136-142, 1992.

R. B. Ridley, A new, continuous-time model for current-mode control (power convertors), IEEE Transactions on Power Electronics, vol.6, issue.2, pp.271-280, 1991.
DOI : 10.1109/63.76813

F. D. Tan and R. D. Middlebrook, A unified model for current-programmed converters, IEEE Transactions on Power Electronics, vol.10, issue.4, pp.397-408, 1995.
DOI : 10.1109/63.391937

P. Barrade, H. Piquet-;-y, . Cheron, and . Méthode, M??thode d'??tude de la stabilit?? des ensembles convertisseurs-filtres, Journal de Physique III, vol.6, issue.1, pp.91-104, 1996.
DOI : 10.1051/jp3:1996116

D. Alejo, P. Maussion, J. Faucher, and M. Sirbu, About just in time Pulse Width Modulation transitions for railway high power traction drives, 10 th European conference on Power Electronics and applications, pp.2-4, 2003.

D. Alejo, P. Maussion, and J. Faucher, Multiple model control of a Buck dc/dc converter, Mathematics and Computers in Simulation, vol.63, issue.3-5, pp.249-260, 2003.
DOI : 10.1016/S0378-4754(03)00073-9

B. Allard, H. Morel, X. Lin-shi, and J. Retif, Mod??le moyen de l???onduleur triphas?? de tension pour la conception de lois de commande, Revue internationale de g??nie ??lectrique, vol.5, issue.1, pp.183-201, 2002.
DOI : 10.3166/rige.5.183-201

C. Karimi, D. Sadarnac, and C. Prevot, On the interaction of the input filter and the converter regulation, 10 th European conference on Power Electronics and applications, pp.2-4, 2003.

D. Sadarnac, C. Karimi, and K. Louati, Input Filter Influence on the Control Stability of DC/DC Converters, IEEE International Symposium on Industrial Electronics, pp.1165-1171, 2004.

J. Buisson, P. Richard, and H. Cormerais, On the Stabilisation of Switching Electrical Power Converters, Lecture Notes in Computer Science, vol.3414, pp.184-197, 2005.
DOI : 10.1007/978-3-540-31954-2_12
URL : https://hal.archives-ouvertes.fr/hal-00772735

P. Richard, H. Cormerais, C. Morvan, and J. Buisson, BOOLEAN SLIDING MODE CONTROL OF MULTILEVEL POWER CONVERTERS, 16 th IFAC World Congress, 2005.
DOI : 10.3182/20050703-6-CZ-1902.01799
URL : https://hal.archives-ouvertes.fr/hal-00779420

J. Buisson, H. Cormerais, and P. Y. Richard, Analysis of the bond graph model of hybrid physical systems with ideal switches, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol.3, issue.6, pp.47-72, 2002.
DOI : 10.1243/0959651021541426
URL : https://hal.archives-ouvertes.fr/hal-00933221

H. Cormerais, C. Valentin, M. Zainea, M. Magos-rivera, and J. Buisson, Mod??lisation des syst??mes physiques ?? commutations par approche ??nerg??tique. Application ?? un convertisseur DC-DC, Journal Europ??en des Syst??mes Automatis??s, vol.41, issue.7-8, pp.775-818, 2007.
DOI : 10.3166/jesa.41.775-818

H. Cormerais, P. Richard, C. Morvan, J. M. Buisson, E. Zainea et al., A Formal Approach to Compute Hybrid Automata Models for Linear Physical Systems with Ideal Switches A double resonance generator simulation using a hybrid approach Automatic Simulink Model Building for Physical Switching Systems Non-linear control design for a boost converter using bond graphs Inversion of linear time-invariant SISO systems modelled by bond graph Small-signal analysis of DC-DC converters with sliding mode control Large-Signal Stability-Oriented Design of Boost Regulators Based on a Lyapunov Criterion With Nonlinear Integral Multiple Lyapunov Function Based Reaching Condition Analyses of Switching Power Converters " , in proceedings of IEEE Power Electronics Specialists Conference Nonlinear H infini -Controller Design for a DC-to-DC Power Converter Robust Nonlinear Control for Boost Converter Large-signal stability-oriented design of boost-type regulators in discontinuous conduction mode Global Stability Analysis of DC-DC Converters Using Sampled-Data Modeling Control Design Methodology For Periodic Systems With Variable Sampling Period. Application To Resonant Converters An Output Feedback Design For Series-Parallel Resonant Converters Control Design Methodology For Periodic Systems With Variable Sampling Period. Application To Resonant Converters " , 6 th European Control Conference QFT controller optimization for automatic QFT design CROULARD, « Commande Multicritères d'un convertisseur à double résonance », thèse de l Natural Balance of Multicell Converters Stacked Multicell Converter (SMC) : Reconstruction of Flying Capacitor Voltages Stacked Multicell Converter (SMC) : Estimation of Flying Capacitor Voltages Stability analysis of a constantpower inverter Stability analysis and control of a gain-varying converter Using the SPARC Topology Synchronization of the inverter voltage supply in order to reduce the residual output ripple, Generic Passivity Based Control for Multicellular Serial Converters 16 th IFAC World Congress IEEE International Conference on Control Applications 17 th IMACS World Congress 11?15 juillet 2005. [75] 1?12. [76] 157?174. [77] IEEE Transactions on Power Electronics 96?102. [78] Y. BERKOVICH, A. IOINOVICI 1610?1619. [79] proceedings of IEEE International Symposium on Circuits and Systems proceedings of American Control Conference th European Control Conference th European Conference on Power Electronics and Applications, EPE'99 proceedings of 39 th IEEE Conference on Decision and Control Multicell Converter : Basic Concepts and Industry Applications 689?694. [91] 691?696. [92] De la modélisation à la commande non linéaire des convertisseurs multicellulaires série. Application à la fonction hacheur Journal de Physique III, les éditions de Physique 10 th European Conference on Power Electronics and Applications proceedings of 35 th IEEE Power Electronics Specialists Conference 10 th European Conference on Power Electronics and Applications Etude d'une loi de commande à gains commutés sur un convertisseur abaisseur avec filtre d'entrée et analyse de la stabilité par une approche LPV », XII ème colloque Electronique de Puissance du Futur EPF Analysis and Synthesis of Robust Control Systems via Parameter-Dependent Lyapunov Functions, pp.367-372, 1995.

S. , L. S. Lim, J. P. How-]-j, P. Y. Buisson, A. H. Richard et al., Analysis and Control of Linear Parameter-Varying Systems Modeling and H d control for switched linear parameter-varying missile autopilot Analyse de robustesse des systèmes non linéaires par les fonctions de Lyapunov à paramètres dépendants », rapport de fin d'études, Supélec, juillet 1994. [103 On the Stabilisation of Switching Electrical Power Converters A generic design methodology for sliding mode control of switched systems Hybrid Control of a Three-cell Converter Associated to an Inductive Load, Formulation générique de problèmes en analyse et commande robuste par les fonctions de Lyapunov dépendant des paramètres 1751?1772. [105] Hybrid Control Techniques Applied to the Step-up DC-DC Converter " , dans les actes de American Control Conference Commande des systèmes hybrides rapides. Applications aux systèmes mécatroniques 39th IEEE Power Electronics Specialists Conference Control Strategy to Stabilize PWM DC-DC Converters with Input Filters Using State-Feedback and Pole- Placement Optimization of the Supply Voltage System in Interleaved Converters Using Intercell Transformers IEEE Transactions on Power Electronics, pp.14-18, 1998.

F. Forest, T. Meynard, E. Labouré, V. Costan, and J. Huselstein, A Multi-Cell Interleaved Flyback Using Intercell Transformers, IEEE Transactions on Power Electronics, vol.22, pp.5-1662, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00327511

P. Y. Richard, M. Morarescu, and J. Buisson, Bond graph modelling of hard nonlinearities in mechanics: A hybrid approach, Nonlinear Analysis: Hybrid Systems, pp.922-951, 2008.
DOI : 10.1016/j.nahs.2008.03.002
URL : https://hal.archives-ouvertes.fr/hal-00326022

J. T. Pukrushpan, A. G. Stefanopoulou, and H. Peng, Modeling and control for PEM fuel cell stack system, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301), 2002.
DOI : 10.1109/ACC.2002.1025268

F. Grasser and A. Rufer, ADVANCED FUEL CELL SYSTEM CONTROL THROUGH STATE SPACE MODELING, IFAC Proceedings Volumes, vol.38, issue.1, 2002.
DOI : 10.3182/20050703-6-CZ-1902.01792
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.472.5962

J. T. Pukrushpan, A. G. Stefanopoulou, and H. Peng, Control of Fuel Cell breathing IEEE Control Systems Magazine, 2004.

J. Reuter, U. J. Beister, N. Liu, and A. Hutchenreuther, Control of a Fuel Cell Air Supply Module (ASM), SAE Technical Paper Series, 2004.
DOI : 10.4271/2004-01-1009

S. Gelfi, A. G. Stefanopoulou, J. T. Pukrushpan, and H. Peng, Dynamics of low-pressure and high-pressure fuel cell air supply systems, Proceedings of the 2003 American Control Conference, 2003., 2003.
DOI : 10.1109/ACC.2003.1243376

P. Rodatz, G. Paganelli, and L. Guzzela, Optimizing air supply control of a PEM fuel cell system, Proceedings of the 2003 American Control Conference, 2003., 2003.
DOI : 10.1109/ACC.2003.1243375

J. T. Pukrushpan, A. G. Stefanopoulou, and H. Peng, Simulation and Analysis of Transient Fuel Cell System Performance Based on a Dynamic Reactant Flow Model, Dynamic Systems and Control, 2002.
DOI : 10.1115/IMECE2002-32051

E. A. Müller and A. G. Stefanopoulou, Analysis, modelling, and validation for the thermal dynamics of a PEM Fuel Cell System, The Third International Conference on Fuel Cell Science, Engineering and Technology, 2005.

N. Romani, E. Godoy, D. Beauvois, and V. L. Lay, Control-oriented modeling and analysis of Air Supply System for fuel reforming Fuel Cell Vehicle The First European Fuel Cell Technology and Applications Conference, ASME, 2005.

H. W. Liepmann and A. Roshko, Elements of Gas Dynamics, 1957.

S. Skogestad, I. Postlethwaite, J. T. Pukrushpan, H. Peng, and A. G. Stefanopoulou, Multivariable Feedback Control: Analysis & Design Control-oriented modeling and analysis for automotive Fuel Cell systems, Journal of Dynamic Systems Measurement and Control, vol.12, 1996.

R. Alur, C. Courcoubetis, N. Halbwachs, T. A. Henzinger, P. H. Ho et al., The algorithmic analysis of hybrid systems, Theoretical Computer Science, vol.138, issue.1, pp.3-34, 1995.
DOI : 10.1016/0304-3975(94)00202-T

J. Buisson, H. Cormerais, M. Zainea, H. Guéguen, and E. Godoy, Formal approach to compute hybrid automata models for linear physical systems with switches, 2004 IEEE International Conference on Robotics and Automation (IEEE Cat. No.04CH37508), pp.47-52, 2004.
DOI : 10.1109/CACSD.2004.1393849
URL : https://hal.archives-ouvertes.fr/hal-00846952

D. Corona, A. Giua, and C. Seatzu, Optimal control of hybrid automata: design of a semiactive suspension, Control Engineering Practice, vol.12, issue.10, pp.1305-1318, 2004.
DOI : 10.1016/j.conengprac.2004.03.014

V. Croulard, E. Godoy, and J. Boichot, QFT controller optimization for automatic design, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), pp.4735-4740, 2000.
DOI : 10.1109/CDC.2001.914676

D. Flieller, P. Riedinger, and J. P. Louis, Computation and stability of limit cycles in hybrid systems, Nonlinear Analysis: Theory, Methods & Applications, vol.64, issue.2, pp.352-367, 2006.
DOI : 10.1016/j.na.2005.06.054
URL : https://hal.archives-ouvertes.fr/hal-00119807

T. Geyer, G. Papafotiou, and M. Morari, On the Optimal Control of Switch-Mode DC-DC Converters, Hybrid Systems: Computation and Control, pp.342-356, 2004.
DOI : 10.1007/978-3-540-24743-2_23

P. Riedinger, C. Zanne, and F. Kratz, Time optimal control of hybrid systems, Proc. of American Control Conference, pp.2466-2470, 1999.

A. J. Van-der-schaft and J. M. Schumacher, An introduction to hybrid dynamical systems, 2000.
DOI : 10.1007/BFb0109998

X. Xu and P. J. Antsaklis, Optimal Control of Switched Autonomous systems, Proc. of 41st IEEE Conference on Decision and Control, pp.4401-4406, 2002.

M. Zainea, E. Godoy, J. Buisson, H. Cormerais, and H. Guéguen, A double resonance generator simulation using a hybrid approach, 2005 European Conference on Power Electronics and Applications, 2005.
DOI : 10.1109/EPE.2005.219429
URL : https://hal.archives-ouvertes.fr/hal-00779603

J. Buisson, Analysis of switching devices with bond graphs, Journal of the Franklin Institute, vol.330, issue.6, pp.1165-1175, 1993.
DOI : 10.1016/0016-0032(93)90070-B

J. Buisson, H. Cormerais, M. Zainea, H. Guéguen, and E. Godoy, A Formal Approach to Compute Hybrid Automata Models for Linear Physical Systems with Ideal Switches, IEEE Conference on Control Applications, International Symposium on Intelligent Control Computer Aided Control System Design, 2004.

H. Cormerais, J. Buisson, S. Leirens, and P. Y. Richard, Calcul symbolique de l'ensemble des équations d'état pour les bond graphs en commutation, Proceedings of CIFA 2002

V. Croulard, Commande multicritère d'un générateur à double résonance

J. Van-dijk and P. C. Breedveld, Simulation of system models containing zero-order causal paths???I. Classification of zero-order causal paths, Journal of the Franklin Institute, vol.328, issue.5-6, pp.959-979, 1991.
DOI : 10.1016/0016-0032(91)90064-A

E. Godoy, J. Laeuffer, T. Planas, B. Lorcet, and D. Sadarnac, A Control analysis and closed loop design for series-parallel resonant converters, p.97, 1997.

D. C. Karnopp, D. L. Margolis, and R. C. Rosenberg, System Dynamics: A Unified Approach, IEEE Transactions on Systems, Man, and Cybernetics, vol.6, issue.10, 1990.
DOI : 10.1109/TSMC.1976.4309434

A. Van-der-schaft and H. Schumacher, An Introduction to Hybrid Dynamical Systems, 2000.
DOI : 10.1007/BFb0109998

J. Strömberg, J. L. Nadjim-tehrani, and J. L. Top, Switched bond graphs as front-end to formal verification of hybrid systems, Proc. International Workshop on Hybrid Systems: Verification and Control, pp.282-293, 1995.
DOI : 10.1007/BFb0020953

G. Kalvelage, P. Aubin, D. Magnon, T. Lequeu, ]. D. Magnon et al., Reduction of Mass and Volume of On-Board Multi Input Voltage Converter Thanks to the SPARC Topology Study and application of an innovating structure of converter : SPARC ? Serial and Parallel Auto Regulated Configuration, Louvin, Synchronization of the inverter voltage supply in order to reduce the residual output ripple; EPE2003, pp.9-13, 2003.

I. Adounkpé, E. Godoy, J. Harcaut, and S. Diop, Robustness Analysis of a Dynamic Inversion based Missile Autopilot, Proceedings of the 9th IEEE International Conference on Methods and Models in Automation and Robotics, 2003.

C. M. Belcastro, Uncertainty Modeling of Real Parameter Variations for Robust Control Applications, 1994.

E. Devaud, Méthodologie de Prise en Compte de la Robustesse dans les Techniques de Linéarisation : Application au Pilotage d'un Missile Fortement Manoeuvrant, 1999.

E. Devaud, J. Harcaut, and H. Siguerdidjane, Three-Axes Missile Autopilot Design: From Linear to Nonlinear Control Strategies, Journal of Guidance, Control, and Dynamics, vol.24, issue.1, pp.64-71, 2001.
DOI : 10.2514/2.4676

E. Devaud, A. Hiret, H. Siguerdidjane, and G. Duc, Dynamic Inversion and LPV Approach : Application to a Missile Autopilot, Proceedings of the IEEE Hong- Kong Symposium on Robotics and Control, pp.293-298, 1999.

J. Harcaut, Commande Non LinéaireLin´Linéaire Appliquée au Pilotage d'un Engin, 1991.

R. A. Hull, D. Schumacher, and Z. Qu, Design and evaluation of robust nonlinear missile autopilots from a performance perspective, Proceedings of 1995 American Control Conference, ACC'95, 1995.
DOI : 10.1109/ACC.1995.529235

A. Isidori, Nonlinear Control Systems, 1995.

U. Jönsson, Robustness Analysis of Nonlinear and Uncertain Systems, 1996.

C. Kao and A. Megretski, Fast Algorithms for Solving IQC Feasibility and Optimization Problems, Proceedings of the American Control Conference, pp.3019-3024, 2001.

M. B. Mcfarland and S. M. Hoque, Robustness of a nonlinear missile autopilot designed using dynamic inversion, AIAA Guidance, Navigation, and Control Conference and Exhibit, 2000.
DOI : 10.2514/6.2000-3970

A. Megretski, C. Kao, and A. Rantzer, A Guide to IQC¬ : Software for Robustness Analysis, Laboratory for Information and Decision Systems, Massachusetts Institute of Technology, 2000.

A. Megretski and A. Rantzer, System analysis via integral quadratic constraints, IEEE Transactions on Automatic Control, vol.42, issue.6, pp.819-830, 1997.
DOI : 10.1109/9.587335

R. A. Nichols, R. T. Reichert, and W. J. Rugh, Gain scheduling for H-infinity controllers: a flight control example, IEEE Transactions on Control Systems Technology, vol.1, issue.2, pp.69-78, 1993.
DOI : 10.1109/87.238400

D. B. Ridgely and M. B. Mcfarland, Tailoring theory to practice in tactical missile control, IEEE Control Systems Magazine, vol.19, issue.6, pp.49-55, 1999.
DOI : 10.1109/37.806916

A. Tsourdos and B. A. White, Nonlinear flight control design for a STT missile, AIAA Guidance, Navigation, and Control Conference and Exhibit, 2001.
DOI : 10.2514/6.2001-4161

J. C. Willems, The Analysis of Feedback Systems, IEEE Transactions on Systems, Man, and Cybernetics, vol.2, issue.4, 1971.
DOI : 10.1109/TSMC.1972.4309170

V. A. Yakubovitch, Frequency Conditions for the Absolute Stability of Control Systems with Several Nonlinear and Linear Nonstationnary Units, Automatic Telemechanics, pp.5-30, 1967.

J. Murphy, E. Turnbull, J. Godoy, T. Laeuffer, B. Planas et al., Power Electronic Control of AC Motors A Control analysis and closed loop design for series-parallel resonant converters, EPE'97 -Trondheim Modélisation et commande à gains commutés d'un convertisseur à double résonance, 1988.

]. E. Devaud, Méthodologie de Prise en Compte de la Robustesse dans les Techniques de Linéarisation : Application au Pilotage d'un Missile Fortement Manoeuvrant, 1999.

E. Devaud, A. Hiret, H. Siguerdidjane, and G. Duc, Dynamic Inversion and LPV Approach : Application to a Missile Autopilot, Proceedings of the IEEE Hong-Kong Symposium on Robotics and Control, pp.293-298, 1999.

M. K. Fan and A. L. Tits, A Measure of Worst-Case À ½ Performance and of Largest Acceptable Uncertainty. System and Control Letters, pp.409-421, 1992.

J. Friang, G. Duc, and J. Bonnet, Robust autopilot for a flexible missile: loop???shaping H design and real ??-analysis, International Journal of Robust and Nonlinear Control, vol.8, issue.2, pp.129-153, 1998.
DOI : 10.1002/(SICI)1099-1239(199802)8:2<129::AID-RNC325>3.3.CO;2-O

J. Harcaut, Commande Non LinéaireLin´Linéaire Appliquée au Pilotage d'un Engin. PhD dissertation, ´ Ecole Nationale Supérieure de l'Aéronautique et de l'Espace, 1991.

A. Helmersson, A finite Frequency Method for -Analysis, Proceedings of the 3rd European Control Conference ECC'95, pp.171-176, 1995.

A. Hiret, Pilotage Robuste d'un Missile sur un Large Domaine de, Synthese et Analyse dans le cadre À ½ et LPV. PhD dissertation, 1999.

A. A. Isidori-]-r, R. T. Nichols, W. J. Reichert, and . Rugh, Nonlinear Control Systems Gain Scheduling for H-Infinity Controllers : A Flight Control Example, IEEE Transactions on Control Systems Technology, vol.1, issue.11, pp.69-78, 1989.

D. B. Ridgely and M. B. Mcfarland, Tailoring theory to practice in tactical missile control, IEEE Control Systems Magazine, vol.19, issue.6, pp.49-55, 1999.
DOI : 10.1109/37.806916

J. S. Shamma, Analysis and Design of Gain- Scheduled Control Systems, 1988.

J. S. Shamma and J. R. Cloutier, Gain-scheduled missile autopilot design using linear parameter varying transformations, Journal of Guidance, Control, and Dynamics, vol.16, issue.2, pp.256-263, 1993.
DOI : 10.2514/3.20997

Y. Chéron, Y. , H. Foch, and J. Salesses, Study of a Resonnant Converter Using Power Transistors in a 25 KW X-Ray Tube Power Supply, ESA Proceedings, IEEE PESCpp, pp.295-306, 1985.

J. Laeuffer, T. Planas, and D. Sadarnac, Les convertisseurs à résonance et leur commande en imagerie médicale, pp.211-215, 1996.

J. Laeuffer, Dispositif de régulation de la tension continue fournie par un générateur du type convertisseur à résonance " IPI patent, 1991.

J. Laeuffer, T. Nuns, T. Planas, M. Fadel, and H. Piquet, Générateur de tension continue à commande optimale, 1993.

E. Godoy, J. Laeuffer, T. Planas, B. Lorcet, and D. Sadarnac, A Control analysis and closed loop design for series-parallel resonant converters, p.97, 1997.

T. Planas, J. Laeuffer, and D. Sadarnac, A Small Signal Analysis and Dead Beat Control For Series Resonant Converters, pp.131-140, 1996.

P. Bliman and M. Sorine, Easy-to-use realistic dry friction models for automatic control, Proceedings of 3rd European Conference, pp.3788-3794, 1995.

C. Canudas-de-wit, H. Olsson, K. Astrom, and P. Lischinsky, A new model for control of systems with friction, IEEE Transactions on Automatic Control, vol.40, issue.3, p.40, 1995.
DOI : 10.1109/9.376053

P. Dahl, Solid Friction Damping of Mechanical Vibrations, AIAA Journal, vol.14, issue.12, pp.1675-82, 1976.
DOI : 10.2514/3.61511

P. Dupont, B. Armstrong, and V. Hayward, Elastoplastic friction model: contact compliance and stiction, Proc. Amer. Control Conf, pp.1072-77, 2000.
DOI : 10.1109/acc.2000.876665
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.216.7908

D. Haessig and B. Friedland, On the Modeling and Simulation of Friction, Journal of Dynamic Systems, Measurement, and Control, vol.113, issue.3, 1991.
DOI : 10.1115/1.2896418

D. Karnopp, Computer Simulation of Stick-Slip Friction in Mechanical Dynamic Systems, Journal of Dynamic Systems, Measurement, and Control, vol.107, issue.1, 1985.
DOI : 10.1115/1.3140698

E. Rabinowicz, The Intrinsic Variables affecting the Stick-Slip Process, Proc. Physical Society of London, pp.668-675, 1958.
DOI : 10.1088/0370-1328/71/4/316

R. Stribeck, Die wesentlichen Eigenschaften der Gleit-und Rollenlager-, Zeitschrift des Vereines Seutscher Ingenieure, pp.1342-1390, 1902.