B. Figure, Modal base of a cylindrical shell (III), pp.65-63

L. Accardo, M. Fioretto, G. Giannini, and P. Marinog, Techniques of PWM space vector modulation for the reduction of magnetic acoustic noise in traction motor, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006., p.103, 2006.
DOI : 10.1109/SPEEDAM.2006.1649929

A. Ah-jaco, Modélisation des moteurs asynchrones triphasés en régime transitoire avec saturation et harmoniques d'espace. Application au diagnostic, 1926.

A. Ait-hammouda, Prédimensionnement etétudeetétude de sensibilité vibro-acoustique de machines courant alternatif et vitesse variable, p.108, 2005.

A. Aluzri, M. , and I. , Vector optimization design of a shaded-pole induction motor, IEEE Transactions on Energy Conversion, vol.17, issue.3, p.22, 2002.
DOI : 10.1109/TEC.2002.801990

A. H. Amor, P. Timar, and M. Poloujadoff, Induction squirrel cage machine design with minimization of electromagnetic noise, IEEE Trans. on En. Conv, vol.10, issue.22, p.23, 1995.

A. H. Amor, P. Timar, and M. Poloujadoff, Optimum Design Of Electromagnetic Devices By The State Variable Method: Application To Transformers, Proceedings of the 6th International Conference on Optimization of Electrical and Electronic Equipments, p.22, 1998.
DOI : 10.1109/OPTIM.1998.710487

M. E. Amri, Measurement of magnetostriction and stress dependent magnetisation in electrical steel, Proceedings of 3rd international seminar on vibrations and acoustic noise of electric machinery, 2002.

M. Anwar and I. Hussain, Radial force calculation and acoustic noise prediction in switched reluctance machines, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370), p.123, 2000.
DOI : 10.1109/IAS.1999.799157

J. Appelbaum, E. F. Fuchs, and J. C. Mhitr, Optimization of three-phase induction motor design. part I: Formulation of the optimization technique, IEEE Summer Power Meeting, p.22, 1986.

A. Arkkio, Unbalanced magnetic pull in cage induction motors with asymmetry in rotor structures, Eighth International Conference on Electrical Machines and Drives, p.123, 1997.
DOI : 10.1049/cp:19971033

A. Astfalck, Analysis of electromagnetic force and noise in inverter driven induction motors, p.18, 2002.

J. Bandler, Q. Cheng, S. Dakroury, A. Mohamed, M. Bakr et al., Space Mapping: The State of the Art, IEEE Transactions on Microwave Theory and Techniques, vol.52, issue.1, 2004.
DOI : 10.1109/TMTT.2003.820904

G. Bao, D. Zhang, J. Shi, and J. Jiang, Optimal design for cogging torque reduction of transverse flux permanent motor using particle swarm optimization algorithm, 4th International Power Electronics and Motion Control Conference, p.23, 2004.

M. Bekemans, Modélisation des machinesélectriquesmachinesélectriques en vue du contrôle des efforts radiaux, p.65, 2006.

A. Belahcen, Magnetoelasticity, magnetic forces and magnetostriction in electrical machines, p.12, 2004.

A. Belhacen, Vibrations of rotating electrical machines due to magnetomechanical coupling and magnetostriction, IEEE Transactions on Magnetics, vol.42, issue.4, p.12, 2006.
DOI : 10.1109/TMAG.2006.871469

D. Belkhayat, D. Roger, and J. Brudny, Active reduction of magnetic noise in asynchronous machine controlled by stator current harmonics, Eighth International Conference on Electrical Machines and Drives, p.21, 1998.
DOI : 10.1049/cp:19971107

R. Belmans and K. Hameyer, Impact of inverter supply and numerical calculation techniques in audible noise problems, International Seminar on Vibrations and Acoustic Noise of Electric Machinery, vol.16, p.21, 1998.

R. Belmans, . Verdyk, and F. Geysen, Electro-mechanical analysis of the audible noise of an inverter-fed squirrel cage induction motor, IEEE Trans. on Ind. Appl, vol.27, issue.11 21, 1991.

M. Besbes, C. Picod, F. Camus, and M. Gabsi, Influence of stator geometry upon vibratory behaviour and electromagnetic performances of switched reluctance motors, IEE Proceedings - Electric Power Applications, vol.145, issue.5, pp.5-123, 1998.
DOI : 10.1049/ip-epa:19982163

J. L. Besnerais, A. Fasquelle, M. Hecquet, V. Lanfranchi, P. Brochet et al., A fast noise-predictive multiphysical model of the PWM-controlled induction machine, Proc. of the International Conference on Electrical Machines (ICEM'06), p.108, 2006.

J. L. Besnerais, A. Fasquelle, V. Lanfranchi, M. Hecquet, and P. Brochet, Mixedvariable optimal design of induction motors including efficiency, noise and thermal criteria, Proc. of the International Conference on Engineering and Optimization (EngOpt), p.112, 2008.

J. L. Besnerais, A. Fasquelle, J. Pelle, S. Harmand, M. Hecquet et al., Multiphysics modeling: electro-vibro-acoustics and heat transfer of induction machines, 2008 18th International Conference on Electrical Machines, p.112, 2008.
DOI : 10.1109/ICELMACH.2008.4800145

J. L. Besnerais, V. Lanfranchi, M. Hecquet, and P. Brochet, Calcul du bruit acoustique d'une machine asynchrone a pas fractionnaire, Proceeding of EF'07, p.73, 2007.

J. L. Besnerais, V. Lanfranchi, M. Hecquet, and P. Brochet, Multi-objective optimization of the induction machine with minimization of audible electromagnetic noise, The European Physical Journal Applied Physics, vol.39, issue.2, p.112, 2007.
DOI : 10.1051/epjap:2007069

J. L. Besnerais, V. Lanfranchi, M. Hecquet, and P. Brochet, Characterization of the audible magnetic noise emitted by traction motors in railway rolling stock, Proc. of the INTERNOISE conference, p.95, 2008.
DOI : 10.3397/1.3204501

J. L. Besnerais, V. Lanfranchi, M. Hecquet, and P. Brochet, Multi-objective optimization of induction machines including mixed variables and noise minimization, IEEE Trans. on Mag, vol.44, pp.6-112, 2008.

J. L. Besnerais, V. Lanfranchi, M. Hecquet, P. Brochet, F. et al., Acoustic noise of electromagnetic origin in a fractional???slot induction machine, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol.27, issue.5, pp.71-73, 2008.
DOI : 10.1108/03321640810890753

J. L. Besnerais, V. Lanfranchi, M. Hecquet, P. Brochet, F. et al., Characterisation of the radial vibration force and vibration behaviour of a PWM-fed fractional-slot induction machine

F. Blaabjerg, J. Pederson, E. Ritchie, and P. Nielsen, Determination of mechanical resonances in induction motors by random modulation and acoustic measurement sinusoidal PWM drives using a randomly modulated carrier, IEEE Trans. on Industrial Applications, pp.31-104, 1995.

I. Boldea and S. A. Nasar, The induction machine handbook, pp.37-117, 2002.
DOI : 10.1201/9781420042658

K. Borisov and A. M. Trzynadlowski, Experimental investigation of a naval propulsion drive model with the PWM-based attenuation of the acoustic and electromagnetic noise, IEEE Transactions on Industrial Electronics, vol.53, issue.2, p.20, 2006.
DOI : 10.1109/TIE.2006.870873

G. Bossio, C. D. Angelo, J. Solsona, G. Garcia, and M. Valla, A 2-D Model of the Induction Machine: An Extension of the Modified Winding Function Approach, IEEE Transactions on Energy Conversion, vol.19, issue.1, p.25, 2004.
DOI : 10.1109/TEC.2003.822294

R. Bouchard and G. Olivier, Conception de moteurs asynchrones triphasés. Editions de l'Ecole Polytechnique de Montréal, p.28, 2005.

J. Boys and P. Handley, Spread spectrum switching: low noise modulation technique for PWM inverter drives, IEE Proceedings B Electric Power Applications, vol.139, issue.3, p.3, 1992.
DOI : 10.1049/ip-b.1992.0030

J. Brudny, Mod??lisation de la denture des machines asynchrones. Ph??nom??ne de r??sonance, Journal de Physique III, vol.7, issue.5, p.35, 1997.
DOI : 10.1051/jp3:1997171

M. Carmeli, F. C. Dezza, and M. Mauri, Electromagnetic vibration and noise analysis of an external rotor permanent magnet motor, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006., p.123, 2006.
DOI : 10.1109/SPEEDAM.2006.1649919

B. Cassoret, R. Corton, D. Roger, and J. Brudny, Magnetic noise reduction of induction machines, IEEE Transactions on Power Electronics, vol.18, issue.2, p.107, 2003.
DOI : 10.1109/TPEL.2003.809341
URL : https://hal.archives-ouvertes.fr/tel-00372876

P. Cester, Magnetostriction as a source of noise and vibrations, design and measurement set-up on an experimental induction motor, Proceedings of summer seminar on Nordic Network for Multi Disciplinary Optimised Electric Drives, p.12, 2002.

S. Chang, Y. , and R. , Experimental study of the vibrational behaviour of machine stators, IEE Proceedings - Electric Power Applications, vol.143, issue.3, p.18, 1996.
DOI : 10.1049/ip-epa:19960184

K. Chau, C. , and S. , Reduction of current ripple and acoustic noise in dual-inverter pole-changing induction motor drives, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018), p.22, 2000.
DOI : 10.1109/PESC.2000.878805

D. Cho, H. Jung, L. , and C. , Induction motor design for electric vehicle using a niching genetic algorithm, IEEE Trans. on I. A, vol.37, pp.4-23, 2001.

D. Cho, K. , and K. , Modelling of electromagnetic excitation forces of small induction motor for vibration and noise analysis, IEE Proceedings - Electric Power Applications, vol.145, issue.3, pp.3-17, 1998.
DOI : 10.1049/ip-epa:19981788

R. Corton, H. Sawezyn, D. Belkhayat, and J. Brudny, Principe of magnetic noise active reduction using three phase systems due to PWM inverter switching, 2 nd International Seminar on Vibrations and Acoustic Noise of Electric Machinery (VANEM), p.21, 2000.

K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, A fast and elitist multiobjective genetic algorithm: NSGA-II, IEEE Transactions on Evolutionary Computation, vol.6, issue.2, p.110, 2002.
DOI : 10.1109/4235.996017

K. Delaere, K. Hameyer, and R. Belmans, Static eccentricity as a cause for audible noise of induction motors, Proccedings of the international conference on Electrical machines (ICEM), p.18, 1998.

K. Delaere, W. Heylen, R. Belmans, and K. Hameyer, Finite element analysis of electrical machine vibrations caused by Lorentz, Maxwell and magnetostriction forces. IEE Seminar on Current Trends in the Use of Finite Elements in Electromechanical Design and Analysis, p.12, 2000.

K. Delaere, W. Heylen, R. Belmans, and K. Hameyer, Local magnetostriction forces for finite element analysis, IEEE Trans on Magnetics, vol.36, issue.5, p.12, 2000.

K. Delaere, W. Heylen, R. Belmans, and K. Hameyer, Comparison of induction machine stator vibration spectra induced by reluctance forces and magnetostriction, IEEE Transactions on Magnetics, vol.38, issue.2, p.12, 2002.
DOI : 10.1109/20.996249

K. Delaere, M. Iadevaia, W. Heylen, P. Sas, K. Hameyer et al., Statistical energy analysis of acoustic noise and vibration for electric motors: transmission from air gap field to motor frame, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370), p.15
DOI : 10.1109/IAS.1999.805997

G. Desbiens, MachinesàMachines`Machinesà induction bobinées sur dents, 2003.

D. Dorland, J. Ferreira, and F. Blaabjerg, An investigation into the relation between the applied electrical waveforms and the acoustic vibrations of inverter-fed induction motors, Proceedings of EPE conference, p.20, 2001.

D. Dorrell, The influence of rotor skew on unbalanced magnetic pull in cage induction motors with eccentric rotors, Seventh International Conference on Electrical Machines and Drives, pp.415-123, 1995.
DOI : 10.1049/cp:19950837

D. Dorrell, W. T. Thomson, and S. Roach, Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors

P. Enjeti, P. Ziogas, L. , and J. , Programmed PWM techniques to eliminate harmonics: a critical evaluation, IEEE Trans. on Ind. Appl, vol.26, issue.2, p.22, 1990.

H. Ertan and N. Simsir, Comparison of PWM and PFM Induction Drives Regarding Audible Noise and Vibration for Household Applications, IEEE Transactions on Industry Applications, vol.40, issue.6, p.20, 2004.
DOI : 10.1109/TIA.2004.836316

F. Fahy, Sound and Structural Vibration Radiation, Transmission and Response, p.47, 1987.

J. Faiz and M. Sharifian, Optimal design of an induction motor for an electric vehicle, European Transactions on Electrical Power, vol.18, issue.1, p.22, 2006.
DOI : 10.1002/etep.62

A. Fasquelle, Contribution la modélisation multi-physique : ´ electro-vibro-acoustique et aérothermique de machines de traction, p.41, 2007.

R. Fei, E. Fuchs, and H. Huang, Comparison of two optimization techniques as applied to threephase induction motor design, IEEE Trans. on Energy Conversion, vol.4, issue.4, p.22, 1989.

W. Finley, M. Hodowanec, and W. Holter, An analytical approach to solving motor vibration problems, Proc. of the 46th Annual Petroleum and Chemical Industry Conference, 1999.

H. Frohne, ber die primren Bestimmungsgr?en der Lautstrke bei Asynchronmaschinen, p.36, 1959.

M. Gabsi, F. Camus, and M. Besbes, Computation and measurement of magnetically induced vibrations of a switched reluctance machine, IEE Proceedings - Electric Power Applications, vol.146, issue.5, pp.5-123, 1999.
DOI : 10.1049/ip-epa:19990416

S. Garvey, F. , and G. L. , Tangential forces matter, 9th International Conference on Electrical Machines and Drives, pp.174-178, 1999.
DOI : 10.1049/cp:19991013

S. Garvey and G. Glew, Magnetostrictive excitation of vibration in machines - a modal approach, 9th International Conference on Electrical Machines and Drives, p.11, 1999.
DOI : 10.1049/cp:19991012

S. Garvey, J. Penny, M. Friswell, and C. Glew, Modelling the vibrational behaviour of stator cores of electrical machines with a view to successfully predicting machine noise, IEE Colloquium on Modelling the Performance of Electrical Machines, pp.169-173, 1999.
DOI : 10.1049/ic:19970897

H. D. Gersem, K. Hameyer, W. , and T. , Electromagnetically excited audible noise in electrical machines, IEEE Trans. on Magnetics, vol.39, issue.3, p.11, 2003.

A. Ghoggal, M. Sahraoui, A. Aboubou, S. Zouzou, R. et al., An improved model of the induction machine dedicated to faults detection -extension of the modified winding function approach

J. Gieras, C. Wang, L. , and J. , Noise of polyphase electric motors, pp.17-18, 2005.
DOI : 10.1201/9781420027730

D. Grant, PWM AC motor drive employing ultrasonic carrier, Proc IEE Conf. Power Electric Variable Speed Drives, p.21, 1984.

T. Habetler and D. Divan, Acoustic noise reduction in sinusoidal PWM drives using a randomly modulated carrier, IEEE Trans. on Power Electronics, vol.6, p.20, 1991.

N. Hashemi and R. P. Lisner, A new strategy for active control of acoustic noise in converter-fed induction motors, Proc. of AUPEC Conference, p.22, 2002.

M. Hecquet, ContributionàContribution`Contributionà l'instrumentation de la démarche de conception des machinesélectriquesmachinesélectriques, HabilitationàHabilitationà Diriger des Recherches, p.123, 2005.

H. Henao, H. Razik, C. , and G. , Analytical approach of the stator current frequency harmonics computation for detection of induction machine rotor faults, IEEE Trans. on Ind. App, vol.41, pp.3-35, 2005.

H. Hesse, Air gap permeance in doubly-slotted asynchronous machines, IEEE Transactions on Energy Conversion, vol.7, issue.3, p.70, 1992.
DOI : 10.1109/60.148571

T. Hilgert, A. Vandevelde, and J. Melkebeek, Application of magnetostriction measurements for the computation of deformation in electrical steel, Journal of Applied Physics, vol.97, issue.10, p.12, 2005.
DOI : 10.1063/1.1847951

T. Hilgert, A. Vandevelde, and J. Melkebeek, Numerical analysis of the contribution of magnetic forces and magnetostriction to the vibrations in induction machines, IET Science, Measurement & Technology, vol.1, issue.1, p.1, 2007.
DOI : 10.1049/iet-smt:20060018

I. Hirotsuka, K. Tsuboi, and F. Ishibashi, Effet of slot-combination on electromagnetic vibration of squirrel-cage induction motor under loaded condition, IEEE Proceedings of Power Conversion Conferance- Nagaoka'97, p.17, 1997.

H. Huang, E. Fuchs, Z. , and Z. , Optimization of single-phase induction motor design, IEEE Trans. on Energy Conversion, vol.3, issue.2, p.22, 1988.

K. Huang, Z. Liu, H. Li, J. Yang, D. Turner et al., Reduction of electromagnetic noise in three-phase induction motors, Proceedings. International Conference on Power System Technology, p.17, 2002.
DOI : 10.1109/ICPST.2002.1047498

A. Hubert, ContributionàContribution`Contributionà l'´ etude des bruits acoustiques générés lors de l'association machines ´ electriques -convertisseurs statiques de puissances -applicationàapplication`applicationà la machine asynchrone, pp.30-33, 2000.

R. Hupe and R. Kennel, Increase of power and reduction of noise and current ripple of inverter fed induction machines, Proc. EPE'89, pp.47-50, 1989.

K. Idir, L. Chang, and H. Dai, Improved neural network model for induction motor design, IEEE Transactions on Magnetics, vol.34, issue.5, p.23, 1998.
DOI : 10.1109/20.717688

S. Iida, Y. Okuma, S. Masukawa, S. Miyairi, and B. Bose, Study on magnetic noise caused by harmonics in output voltages of PWM inverter, [Proceedings] IECON '90: 16th Annual Conference of IEEE Industrial Electronics Society, 1991.
DOI : 10.1109/IECON.1990.149300

M. Joksimovic, M. Djurovic, and J. Penman, Cage rotor MMF: winding function approach, IEEE Power Engineering Review, vol.21, issue.4, p.35, 2001.
DOI : 10.1109/39.916355

M. Joksimovic, D. Momir, A. , and O. , Skew and linear rise of MMF across slot modeling -winding function approach, IEEE Trans. on Energy Conversion, vol.3, issue.33, pp.14-62, 1999.

H. Jordan, Electric motor silencer -formation and elimination of the noises in the electric motors

M. Jufer and J. Andsabonnadì-ere, Conception assistée par ordinateur : moteur asynchrone. Techniques de l'ingénieur, traité Génie Electrique D3590, pp.2-16, 1990.

F. Jurado and M. Valverde, Multiobjective Genetic Algorithm for Three-Phase PWM Inverter in Microturbines, Electric Power Components and Systems, vol.35, issue.8, p.23, 2005.
DOI : 10.1049/el:19870469

A. Kedous-lebouc, Matériaux magnétiques en génié electrique, Hermes Sciences Publications, issue.11, p.18, 2006.

K. Kim, Y. Jung, and Y. Lim, Shaping the spectra of the acoustic noise emitted by three-phase inverter drives based on the new hybrid random PWM technique, Record of the 37th Annual IEEE Power Electronics Specialists Conference (PESC'06), p.22, 2006.

K. Kamimoto, F. Ishibashi, S. Noda, S. Yanase, and T. Sasaki, Magnetostriction and motor vibration, Electrical Engineering in Japan, vol.145, issue.2, p.11, 2003.
DOI : 10.1002/eej.10338

M. Klemenz, A sound synthesis model for sound-quality optimisation of starting electric railbound vehicles, Proceedings of the 33rd International Congress and Exposition on Noise Control Engineering (INTERNOISE), p.103, 2004.

G. Kloos, Magnetostatische Maxwellspannungen und Magnetostriktion, Electrical Engineering, vol.45, issue.2, 1998.
DOI : 10.1007/BF01237889

T. Kobayashi, F. Tajima, M. Ito, and S. Shibukawa, Effects of slot combination on acoustic noise from induction motors, IEEE Transactions on Magnetics, vol.33, issue.2, p.17, 1997.
DOI : 10.1109/20.582736

G. Kron, Induction Motor Slot Combinations Rules to Predetermine Crawling, Vibration, Noise and Hooks in the Speed-Torque Curve, Transactions of the American Institute of Electrical Engineers, vol.50, issue.2, p.16, 1931.
DOI : 10.1109/T-AIEE.1931.5055866

L. Laftman, Magnetostriction and its contribution to noise in a PWM inverter fed induction machine, Le Journal de Physique IV, vol.08, issue.PR2, p.18, 1998.
DOI : 10.1051/jp4:19982130

J. Lambert, Le bruit des transports en Europe : exposition de la population, risques pour la santé et coûts pour la collectivité, Colloque du Conseil National du Bruit, 2000.

V. Lanfranchi, Optimisation de la commande en vitesse variable des machines asynchrones. Conception dune méthode de Filtrage Actif Optimisé, 1921.

V. Lanfranchi, G. Friedrich, J. L. Besnerais, and M. Hecquet, Spread spectrum strategies study for induction motor vibratory and acoustic behavior, Proceedings of the IECON, p.20, 2006.

V. Lanfranchi, G. Friedrich, J. L. Besnerais, and M. Hecquet, Using spread spectrum strategies for improvement of induction motor acoustic behavior. unpublished, p.20

V. Lanfranchi, A. Hubert, F. , and G. , Comparison of a natural sampling and random PWM strategy for reducing acoustic annoyances, Proceedings of European Power Electronics and drive conference (EPE 03), p.103, 2003.

L. Lebensztajn, C. Marretto, M. Costa, C. , and J. , Kriging: A Useful Tool for Electromagnetic Device Optimization, IEEE Transactions on Magnetics, vol.40, issue.2, p.23, 2004.
DOI : 10.1109/TMAG.2004.824542

J. Lecointe, R. Romary, J. Brudny, C. , and T. , Five methods of stator natural frequency determination: case of induction and switched reluctance machines, Mechanical Systems and Signal Processing, vol.18, issue.5, p.15, 2004.
DOI : 10.1016/j.ymssp.2003.08.002

A. Leroy, Etude psycho-acoustique du bruit des transformateurs et des selfs, Tech. rep., ALSTOM Transport, p.123, 2008.

L. Liaw, Random slope PWM inverter using existing system background noise: Analysis, design and implementation, IEE Proceedings - Electric Power Applications, vol.147, issue.1, 2000.
DOI : 10.1049/ip-epa:20000019

R. Lisner and P. Timar, A new approach to electric motor acoustic noise standards and test procedures, IEEE Trans. on En. Conv, vol.14, issue.3 3, 1999.

M. Liwschitz, Field harmonics in induction motors, Electr. Eng. Trans, vol.13, issue.28, pp.61-90, 1942.

W. Lo, C. Chan, Z. Zhu, L. Xu, D. Howe et al., Acoustic noise radiated by PWMcontrolled induction machine drives, IEEE Trans. on Industrial Electronics, vol.47, issue.20, p.21, 2000.

R. Lyon, Statistical Energy Analysis of Dynamical Systems: Theory and Applications, p.15, 1975.

A. Malfait, R. Reekmans, and R. Belmans, Audible noise and losses in variable speed induction motor drives with IGBT inverters-influence of the squirrel cage design and the switching frequency, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting, 1994.
DOI : 10.1109/IAS.1994.345435

K. Maliti, Modelling and analysis of magnetic noise in squirrel-cage induction motors, pp.36-47, 2000.

M. Manna, S. Marwaha, and A. Marwaha, Computation and analysis of end region electromagnetic force for electrical rotating machines using fem, IEEE Proc. of PEDES, issue.10, 2006.

K. Matsuse, T. Hayashida, H. Kubota, Y. , and T. , Analysis of inverter-fed high speed induction motor considering crosspath resistance between adjacent rotor bars, IEEE Trans. Ind. Appl, vol.30, pp.3-30, 1994.

S. Mezani, ModélisationModélisationélectromagnétique et thermique des moteursàmoteurs`moteursà induction, en tenant compte des harmoniques d'espace, 1926.

J. Michel, Bobinage des machines tournantes courant alternatif, pp.430-447

X. Mininger, Réduction des vibrations des machinesàmachines`machinesà réluctances variablè a l'aide d'actionneurs piézoélectriques, 1922.

X. Mininger, E. Lefeuvre, M. Gabsi, C. Richard, and D. Guyomar, Semiactive and Active Piezoelectric Vibration Controls for Switched Reluctance Machine, IEEE Transactions on Energy Conversion, vol.23, issue.1, p.22
DOI : 10.1109/TEC.2007.914668
URL : https://hal.archives-ouvertes.fr/hal-00352286

J. Moreira and T. Lipo, Modeling of saturated AC machines including air gap flux harmonic components, IEEE Transactions on Industry Applications, vol.28, issue.2, p.36, 1992.
DOI : 10.1109/28.126740

S. Na, Y. Jung, Y. Lim, Y. , and S. , Reduction of audible switching noise in induction motor drives using random position space vector PWM, IEE Proceedings of Electric Power Applications 149, p.20, 2002.
DOI : 10.1049/ip-epa:20020244

S. Nau, The influence of the skewed rotor slots on the magnetic noise of three-phase induction motors, Eighth International Conference on Electrical Machines and Drives
DOI : 10.1049/cp:19971106

S. Nau, B. Bork, H. Santos, N. Sadowski, and R. Carlson, The influence of the frame and windings on the natural frequencies of stator of induction motors, Proc. of the International Conference on Electrical Machines (ICEM), p.15, 2006.

D. Novotny and S. Nasar, High frequency losses in induction motors, p.123, 1991.

M. Nurdin, M. Poloujadoff, and A. Faure, Synthesis of squirrel cage motors: a key to optimization, IEEE Transactions on Energy Conversion, vol.6, issue.2, p.22, 1991.
DOI : 10.1109/60.79640

K. Oberretl, Losses, torques and magnetic noise in induction motors with static converter supply, taking multiple armature reaction and slot openings into account, IET Proc. on Electric Power Applications, pp.517-531, 2007.
DOI : 10.1049/iet-epa:20060435

O. Connell, T. Krein, and P. , A preliminary investigation of computer-aided Schwarz-Christoffel transformation for electric machine design and analysis, IEEE COMPEL Workshop, p.13, 2006.

S. Onodera, Y. , and K. , An evaluation of electromagnetic vibration of a squirrel-cage induction motor, Elektrotechnicky Casopis, vol.44, issue.2, p.17, 1993.

H. Pépin, Le bruit et les vibrations d'originé electromagnétique dans les machines tournantesàtournantes`tournantesà moteur ´ electrique -Etude bibliographique, p.17, 2003.

J. Perho, Reluctance Network for Analysing Induction Machines, p.123, 2002.

D. Petrichenko, Contribution la modlisation et la conception optimale des turboalternateurs, p.123, 2006.

M. Poloujadoff, E. Christaki, and C. Bergniann, Univariant search: An opportunity to identify and solve conflict problems in optimization, IEEE Trans. on Energy Conversion, vol.9, issue.4, p.22, 1994.

M. Poloujadoff, J. Mipo, and P. Siarry, Design p/2p windings by the simulated annealing method, Record of the Electric Machines and Drives Conference, p.23, 1997.

R. Rabinovici, Magnetic field analysis of permanent magnet motors, IEEE Transactions on Magnetics, vol.32, issue.1, p.123, 1996.
DOI : 10.1109/20.477581

M. Roytgarts and M. Pronin, Reducing of induction motors vibrations at drives with semiconductor converters designing, IEEE Trans. on Energy Conversion, vol.3, issue.2 9, 1988.

S. Salon, M. D. Bortoli, D. Burow, and C. Slavic, Effects of slot closure and magnetic saturation on induction machine behavior, IEE Proc. of International Conference on Electrical Machines, p.17, 1992.
DOI : 10.1109/20.312744

C. Singh and D. Sarkar, Practical considerations in the optimisation of induction motor design, IEE Proceedings B Electric Power Applications, vol.139, issue.4, p.22, 1992.
DOI : 10.1049/ip-b.1992.0043

C. Singh and D. Sarkar, A research survey of induction motor operation with non-sinusoidal supply wave forms, Electric Power Systems Research, vol.75, issue.2-3, p.20, 2005.
DOI : 10.1016/j.epsr.2005.04.001

W. Soedel, Vibrations of shells and plates. Marcel Dekker, p.135, 1993.

A. Stankovic, L. , and H. , Randomized modulation in power electronic converters, Proceedings of the IEEE, vol.90, issue.5, p.20, 2002.
DOI : 10.1109/JPROC.2002.1015007

H. Stemmler and T. Eilinger, Spectral analysis of the sinusoidal PWM with variable switching frequency for noise reduction in inverter-fed induction motors, Proceedings of 1994 Power Electronics Specialist Conference, PESC'94, p.20, 1994.
DOI : 10.1109/PESC.1994.349721

S. Sudhoff, B. Kuhn, K. Corzine, and B. Branecky, Magnetic Equivalent Circuit Modeling of Induction Motors, IEEE Transactions on Energy Conversion, vol.22, issue.2, p.123, 2007.
DOI : 10.1109/TEC.2006.875471

I. Takahashi and H. Mochikawa, Optimum PWM Waveforms of an Inverter for Decreasing Acoustic Noise of an Induction Motor, IEEE-IAS Annual Meeting Conf. Rec. 1, p.20, 1985.
DOI : 10.1109/TIA.1986.4504800

P. Timar, Effect of application of semi-conductors on vibrations and noise of slip ring induction motors, Elektrotechnika, vol.70, issue.3, p.20, 1977.

P. Timar, Noise and vibration of electrical machines. Elsever, p.51, 1989.

P. Timar, L. , and J. , Acoustic noise of electromagnetic origin in an ideal frequency-converter-driven induction motor, IEE Proceedings - Electric Power Applications, vol.141, issue.6, p.56, 1994.
DOI : 10.1049/ip-epa:19941342

K. Tse, H. Chung, S. R. Hui, S. , and H. , Analysis and spectral characteristics of a spreadspectrum technique for conducted EMI suppression, IEEE Trans. on Power Electronics, vol.15, issue.2, 2000.

S. Ueda, K. Honda, T. Ikimi, M. Hombu, and A. Ueda, Magnetic noise reduction technique for an AC motor driven by a PWM inverter, IEEE Transactions on Power Electronics, vol.6, issue.3, p.83, 1991.
DOI : 10.1109/63.85897

L. Vandevelde and J. Melkebeek, Magnetic forces and magnetostriction in electrical machines and transformer cores, IEEE Transactions on Magnetics, vol.39, issue.3, p.12, 2003.
DOI : 10.1109/TMAG.2003.810414

S. Verma and A. Balan, Determination of radial-forces in relation to noise and vibration problems of squirrel-cage induction motors, IEEE Transactions on Energy Conversion, vol.9, issue.2, p.36, 1994.
DOI : 10.1109/60.300130

S. Verma and A. Balan, Electromagnetic surface excitation system for the study of vibration behaviour of stator of electrical machines, Proceedings of ICEM 96, pp.332-337, 1996.

S. Verma and A. Balan, Experimental investigations on the stators of electrical machines in relation to vibration and noise problems, IEE Proc. on Electr. Power Appl, vol.145, issue.15, p.18, 1998.

S. Vivier, Stratgies dOptimisation par la Mthode des Plans dExpriences Et Application aux Systmes Electrotechniques Modliss par Elments Finis, p.109, 2002.

S. Vivier, M. Hecquet, and P. Brochet, Stratégies d'optimisation basées sur la méthode des plans d'expériences pour la conception de dispositifsélectrotechniquesdispositifsélectrotechniques, p.23, 2005.

P. Wach, Algorithmic method of design and analysis of fractional-slot windings of AC windings, Electrical Engineering, vol.81, issue.3, p.73, 1998.

A. Wallace, R. Spee, M. , and L. , Current harmonics and acoustic noise in AC adjustable-speed drives, IEEE Trans. on Industrial Electronics, vol.26, p.21, 1990.

C. Wang, Vibro-acoustic analysis of inverter driven induction motors, 1998.

C. Wang, L. , and J. , Prediction of natural frequencies of finite length circular cylindrical shells, Applied Acoustics, vol.59, issue.4, p.15, 2000.
DOI : 10.1016/S0003-682X(99)00039-0

C. Wang, L. , and J. , THE SOUND RADIATION EFFICIENCY OF FINITE LENGTH ACOUSTICALLY THICK CIRCULAR CYLINDRICAL SHELLS UNDER MECHANICAL EXCITATION I: THEORETICAL ANALYSIS, Journal of Sound and Vibration, vol.232, issue.2, p.47, 2000.
DOI : 10.1006/jsvi.1999.2749

C. Wang, L. , and J. , THE SOUND RADIATION EFFICIENCY OF FINITE LENGTH CIRCULAR CYLINDRICAL SHELLS UNDER MECHANICAL EXCITATION II: LIMITATIONS OF THE INFINITE LENGTH MODEL, Journal of Sound and Vibration, vol.241, issue.5, p.15, 2001.
DOI : 10.1006/jsvi.2000.3338

C. Wang, J. Lai, and A. Astfalck, Sound power radiated from an inverter-driven induction motor: experimental investigation, IEE Proceedings - Electric Power Applications, vol.149, issue.1, p.21, 2002.
DOI : 10.1049/ip-epa:20020067

C. Wang, J. Lai, and A. Astfalck, Sound power radiated from an inverter driven induction motor II: numerical analysis, IEE Proceedings - Electric Power Applications, vol.151, issue.3, p.133, 2004.
DOI : 10.1049/ip-epa:20040120

C. Wang, J. Lai, and D. Pulle, Prediction of acoustic noise from variable-speed induction motors: deterministic versus statistical approaches, IEEE Transactions on Industry Applications, vol.38, issue.4, pp.4-16, 2002.
DOI : 10.1109/TIA.2002.800567

H. Wang, W. , and K. , EFFECTS OF LAMINATIONS ON THE VIBRATIONAL BEHAVIOUR OF ELECTRICAL MACHINE STATORS, Journal of Sound and Vibration, vol.202, issue.5, p.18, 1997.
DOI : 10.1006/jsvi.1996.0845

R. Yacamini, C. , and S. , Noise and vibration from induction machines fed from harmonic sources, IEEE Transactions on Energy Conversion, vol.10, issue.2
DOI : 10.1109/60.391894

S. J. Yang, Low noise electrical motors, pp.51-95, 1981.

Z. Zhu and D. Howe, Effects of end-shields and rotor on the natural frequencies and modes of stator of an electrical machine, Proc. 4th Int. Conf. Electrical Machines and Drives, pp.232-236, 1989.

Z. Zhu and D. Howe, Improved methods for prediction of electromagnetic noise radiated by electrical machines, IEE Proceedings - Electric Power Applications, vol.141, issue.2, pp.109-120, 1994.
DOI : 10.1049/ip-epa:19949961

Z. Zhu and D. Howe, Influence of mounting and coupling on the natural frequencies and acoustic noise radiated by a PWM controlled induction machine, 9th International Conference on Electrical Machines and Drives, pp.164-168, 1999.
DOI : 10.1049/cp:19991011

E. Zwicker and H. Fastl, Psychoacoustics, Facts and Models, p.103, 1992.