]. B. Bhattacharyya, J. Munda, and M. Malapati, Advencement in electrochemical micro-machining, International Journal of Machine Tools & Manufacturing, pp.44-1577, 2004.

G. Binning, H. Rohrer, . Ch, and E. Gerber, Surface Studies by Scanning Tunneling Microscopy, pp.157-60, 1982.
DOI : 10.1007/978-94-011-1812-5_1

. Bouchareine-'99-]-p and . Bouchareine, Métrologie des surfaces, 1999.

W. S. Chang and S. J. Na, A study on the prediction of the laser weld shape with varying heat source equations and the thermal distortion of a small structure in micro-joining, Journal of Materials Processing Technology, vol.120, issue.1-3, pp.208-214, 2002.
DOI : 10.1016/S0924-0136(01)00716-6

X. Chen and H. X. Wang, A calculation model for the evaporation recoil pressure in laser material processing, Journal of Physics D: Applied Physics, vol.34, issue.17, pp.2637-2642, 2001.
DOI : 10.1088/0022-3727/34/17/310

G. Chryssolouris, Laser machining, theory and practice, 1991.

]. E. Cical?, Metoda experimentelor factoriale, proiectarea experimentelor, modelare, optimizare, Editura Politehnica Timi?oara, p.320, 2005.

E. F. Cical?, Metode de prelucrare statistic? a datelor experimentale, Editura Politehnica, p.303, 1999.

A. Cornet and J. P. Deville, Physique et ingénierie des surfaces, édition EDP Sciences, 1998.

]. W. Dong, P. J. Sullivan, and K. J. Stout, Comprehensive study of parameters for characterising three-dimensional surface topography

]. W. Dong and K. J. Stout, An integrated approach to the characterization of surface wear I: Qualitative characterization, pp.181-183, 1995.

B. Drévillon, Spectroscopic ellipsometry in the infrared range, Thin solid films, pp.313-314625, 1998.
DOI : 10.1016/S0040-6090(97)00968-1

B. R. Finke, P. D. Kapadia, and J. M. Dowden, A fundamental plume based model for energy transfer in laser material processing, Journal of Physics D: Applied Physics, pp.23-643, 1990.

R. K. Ganesh and A. Faghri, A generalized thermal modeling for laser driling process ? I. Mathematical modelling and numerical methodology, International Journal of Heat Mass Transfer, pp.40-3351, 1997.

J. Goupy, Introduction aux plans d'expériences ? 2 e Edition, 2001.

H. Haefke, Y. Gerbig, G. Dumitru, and V. Romano, Microtexturing of functional surfaces for improving their tribological performance, Proceedings of the International Tribology Conference, pp.217-221, 2000.

G. Herziger, <title>Physics Of Laser Materials Processing</title>, High Power Lasers and Their Industrial Applications, pp.188-194, 1986.
DOI : 10.1117/12.938099

G. Herziger, E. W. Kreutz, and K. Wissenbach, Fundamentals of laser processing of materials, Proceeding of SPIE, pp.2-10, 1986.

C. Joseph, Contribution à l'accroissement des performances du processus de µEDM par l'utilisation d'un robot à dynamique élevée et de haute précision, Thèse de doctorat, 2005.

A. Kaldos, H. J. Pieper, E. Wolf, and M. Krause, Laser machining in die making???a modern rapid tooling process, Proc. Tech, pp.155-156, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.258

M. R. Knowles, G. Rutterford, D. Karnakis, A. Ferguson, P. Lacombe et al., Laser Micromachining of Metals, Ceramics, Silicon and Polymers using Nanosecond Lasers, Multi-material Micro Manufacture (4M), 29th - 30th, Grooving by Nd:YAG laser treatment, J. Mat. Proc. Techn, pp.1016-99, 1990.

R. K. Leach and P. H. Harris, Ambiguities in the definition of spacing parameters for surface-texture characterization, Measurement Science and Technology, vol.13, issue.12, 1924.
DOI : 10.1088/0957-0233/13/12/316

]. Z. Li, Y. Mingjiang, W. Liu, and M. Zhong, Investigation on crater morphology by high repetitive rate YAG laser-induced discharche texturing, Surf. and Coat. Tech, pp.200-4493, 2006.

C. Mai and J. Lin, Supersonic flow characteristics in laser grooving, Optics & Laser Technology, vol.35, issue.8, pp.597-604, 2003.
DOI : 10.1016/S0030-3992(03)00083-5

]. S. Bin-mansoor, B. S. Yilbas, and S. Z. Shuja, Laser heating and surface evaporation, International Communications in Heat and Mass Transfer, vol.32, issue.6, pp.32-822, 2005.
DOI : 10.1016/j.icheatmasstransfer.2004.09.001

T. Mathia, H. Zahouani, J. Rousseau, and &. J. Le-bosse, Functional significance of different techniques for surface morphology measurements, International Journal of Machine Tools and Manufacture, vol.35, issue.2, pp.195-202, 1995.
DOI : 10.1016/0890-6955(94)P2373-N

J. Mazumder and W. M. Steen, Heat transfer model for cw laser material processing, Journal of Applied Physics, vol.51, issue.2, pp.51-941, 1980.
DOI : 10.1063/1.327672

S. Mezghani and H. Zahouani, Characterisation of the 3D waviness and roughness motifs, Wear, vol.257, issue.12, pp.257-1250, 2004.
DOI : 10.1016/j.wear.2004.05.024

]. D. Montgomery, Design and analysis of experiments, 1991.

. Etat-de-surface, Méthode du profil?Termes, définitions et paramètres d'état de surface, réf n° prEN 4287:1997 F, Comité Européen de Normalisation, 1997.

W. E. Neal and R. W. Fane, Ellipsometry and its applications to surface examination, Journal of Physics E: Scientific Instruments, vol.6, issue.5, 1973.
DOI : 10.1088/0022-3735/6/5/001

A. Tuan-nguyen and D. L. Butler, Correlation-length-based sampling conditions for various engineering surfaces, Measurement Science and Technology, vol.16, issue.9, pp.1813-1822, 2005.
DOI : 10.1088/0957-0233/16/9/014

A. Nichici and E. Cicala, Introduction in the strategy of materials laser cutting process optimization, Procedings of Laserap, vol.4, pp.97-102, 2001.

R. W. Olson and W. C. Swope, Laser drilling with focused Gaussian beams, Journal of Applied Physics, vol.72, issue.8, pp.72-3686, 1992.
DOI : 10.1063/1.352313

D. S. Park, M. W. Cho, H. Lee, and W. S. Cho, Micro-grooving of glass using micro-abrasive jet machining, Journal Of Materials Technology Processing, pp.146-234, 2004.

M. Pfestorf, U. Engel, and M. Geiger, 3D-surface parameters and their application on deterministic textured metal sheets, International Journal of Machine Tools and Manufacture, vol.38, issue.5-6, pp.38-607, 1998.
DOI : 10.1016/S0890-6955(97)00108-9

J. Qi, K. L. Wang, and Y. M. Zhu, A study on the laser marking process of stainless steel, Journal of Materials Processing Technology, vol.139, issue.1-3, pp.139-273, 2003.
DOI : 10.1016/S0924-0136(03)00234-6

]. F. Quintero, Theoretical analysis of material removal mechanisms in pulsed laser fusion cutting of ceramics, Journal of Physics D: Applied Physics, vol.38, issue.4, pp.38-655, 2005.
DOI : 10.1088/0022-3727/38/4/021

P. Schaaf, Laser nitriding of metals, Progress in Materials Science, pp.1-161, 2002.
DOI : 10.1016/S0079-6425(00)00003-7

V. Semak and A. Matsunawa, The role of recoil pressure in energy balance during laser materials processing, Journal of Physics D: Applied Physics, vol.30, issue.18, pp.2541-2552, 1997.
DOI : 10.1088/0022-3727/30/18/008

. Semak-'97b-]-v, X. Semak, K. Chen, J. Mundra, and . Zhao, Numerical simulation of hole profile in high beam intensity laser drilling, Processing of Laser Materials, Proceedings' Conference 1997, pp.81-90

]. V. Semak, B. Damkroger, and S. Kempka, Temporal evolution of the temperature field in the beam interaction zone during laser material processing, Journal of Physics D: Applied Physics, vol.32, issue.15, pp.32-1819, 1999.
DOI : 10.1088/0022-3727/32/15/309

]. Z. Shen, S. Y. Zhang, J. Lu, and X. W. Ni, Mathematical modelling of laser induced heating and melting in solids, Optics and Laser Technology, pp.33-533, 2000.

]. P. Solana, Time dependent ablation and liquid ejection processes during the laser drilling of metals, Optics Communications, vol.191, issue.1-2, pp.97-112, 2001.
DOI : 10.1016/S0030-4018(01)01072-0

K. J. Stout and L. A. Blunt, Application of 3D topography to bioengineering, Int. J. Mach. Tools Manufact, vol.2, pp.219-229, 1995.

M. and V. Allmen, Laser drilling velocity in metals, Journal of Applied Physics, vol.47, issue.12, pp.5460-5463, 1976.
DOI : 10.1063/1.322578

X. Wang and . Chen, Three-dimensional modelings of the laserinduced plasma plume characteristics in laser welding, J. Phys. D: Appl. Phys, pp.36-628, 2003.

]. E. Westkämper and M. Kraus, Theoretical consideration for a new tolerance system to characterise technical surfaces in the micro-and nanometer scale, 3 rd Seminar on Quantitative Microscopy, ICS Lectures on Industrial Applications of Lasers, 2000.

G. Xu, K. H. Chen, and . Song, Experimental and numerical investigation of heat transfer and phase change phenomena during excimer laser interaction with nickel, International Journal of Heat and Mass Transfer, vol.42, issue.8, pp.42-1371, 1999.
DOI : 10.1016/S0017-9310(98)00272-5

]. S. Yi, S. H. Jin, J. D. Lee, and C. N. Chu, Fabrication of high-aspectratio stainless steel shadow mask and its application to pentacene thin-film transistors, Journal of Micromechanics and Microengineering, pp.15-263, 2005.

B. S. Yilbas and A. F. Arif, Material response to thermal loading due to short pulse laser heating, International Journal of Heat and Mass Transfer, vol.44, issue.20, pp.44-3787, 2001.
DOI : 10.1016/S0017-9310(01)00026-6

S. Z. Yilbas, A. Shuja, and M. A. Arif, Laser-shock processing of steel, Journal of Materials Processing Technology, vol.135, issue.1, pp.135-141, 2003.
DOI : 10.1016/S0924-0136(02)00813-0

B. S. Yilbas and S. Z. Shuja, Laser short-pulse heating of surfaces, Journal of Physics D: Applied Physics, vol.32, issue.16, pp.1947-1954, 1999.
DOI : 10.1088/0022-3727/32/16/301